Hi, I searched around but didn't find a good answer.
Does the European Nexus 6 (XT1100) come with Turbo Charger in the box or does it have the standard 850mA Motorola Charger?
I just got mine (supposedly new) with a standard charger and I'm afraid if someone swapped the original Turbo Charger for this one...
Yes , every Nexus 6 device will come with the Turbo Charger.
Thanks guys I contacted the shop I got it from and they have messed up the box, they imported from UK and swapped the charger with the EU prong charger and they put the normal Motorola one instead of the Turbo Charger... Too bad for them they sold to a user that notices all the details
Hello everyone,
Ever since I got this Mi5 (125GB 4GB version) I've been trying everything I can so see it its behavior matches what is advertised. I should start off by saying so far so good.
Coming from a Moto X xt1092 I was used to some sort of indication that I was plugged to a QC enabled charger, not just a regular one. On this Mi5, however, and keep in mind that I'm under Lineage OS, I have no indication. I can count the minutes it takes to fill up a dead battery or maybe just 50% percent of it, but I'd like a sure and bullet proof indication. Also keep in mind that I'm using the original charger and cable - said charger that has the QC symbol on it.
Reading other threads, I noticed some posters were advised apps like Ampere - which I installed. Now, what kind of values should I expect from the app when charging? As of now, it hits a maximum of 1610 mA. What should I be looking at and what are the cutoffs above which I can be sure it's quick charging, as opposed to just regular charging?
Thank you in advance.
Added info: just set it to charge at 4%. 38 min later it was at 29%. It seems to me that 25% in 38 min is below QC 3 or even 2 standard (as it is often said that despite the mi5 being QC3 compatible, the original charger is QC2).
So, any chance one of you mi 5 owners can grab that app and give me some reference numbers? Just so I know for sure that I need to try and get a refund for the charger the phone shipped with.
4.1260 V
2860 mA
Edit
Miui 8.2 by xiaomi.eu
7.2.9 beta weekly
Mi5 64/3gb
Thank you.
Yeah that's way higher higher​ than what I'm getting. Also, under technology I have "Li-ion", and a much lower Voltage.
Weird.
Something is definitely up.
zoejo said:
Thank you.
Yeah that's way higher higher​ than what I'm getting. Also, under technology I have "Li-ion", and a much lower Voltage.
Weird.
Something is definitely up.
Click to expand...
Click to collapse
the brick you get in the box is qc2. The device supports qc3 though and if the device is hot it will go upto 1610ma only buy a qc 3 brick roughly your charge should be done in 1hr 15-1hr 30 minutes
I knew the charger was qc2, I just thought it would go higher than 1610, which is exactly the top mA registered. Thanks for that info - I guess there's nothing wrong with it.
I have a qc3 charger on the way too.
The shipped charger has max current of 2.5A and indeed, during the first 10% ampere shows value near that (23XX mA on my phone). It will then gradually decrease down to 0.01A when the capacity is above 95%. Using real QC 3.0 charger (I have both Tronsmart and Aukey), the first 10% it can reach 28XX mA. The ending is similar, though.
I use the stock charger and cable that came in the box. I bought it here in macedonia. But i dont have an idea for wich market it is destined. I can confirm that it charges the phone to 85-90% in less than an hour, then it gets slow as stated above
Yeah I don't get those times, not even nearly. As you can see from the screen shot it took about two hours, most of which with screen off and no activity.
Do you have the same oem charger that i pictured above?
try to use different cable or different charger like aukey or tronsmart..
FYI original charger which support QC 3.0 Just MDY 08-EH
Azzam_Farid said:
try to use different cable or different charger like aukey or tronsmart..
FYI original charger which support QC 3.0 Just MDY 08-EH
Click to expand...
Click to collapse
No only mainland china mi5 ships with QC 3 other regions where mi5 is sold only gets qc2 charger Google it if you want
Well mine was bought in Macedonia (south east europe) and i got a qc 3.0. indeed it is not with a local standard socket so i use a smalla dapter for the plug, but the point is that it depends to wich parts of the world xiaomi "officially" export, and to wich parts of the worlds (most of them) local companies undertake an adventure to import a batch of several hundred or thousands units from xiaomi, thus meaning destined for local chinese market
v1k1n9 said:
Do you have the same oem charger that i pictured above?
Click to expand...
Click to collapse
Yes, the exact same. But as that's not an European plug, I wonder if that's why I get different performance - it came with an adaptor.
I'm awaiting a new cable and charger in the mail soon that should clear it up.
Miui 7.5 global stable
Fataldose said:
Miui 7.5 global stable
Click to expand...
Click to collapse
Damn.
This is original charger and cable? Any US to EU adapter by any chance?
Here's hoping it's not lineage os related.
zoejo said:
Damn.
This is original charger and cable? Any US to EU adapter by any chance?
Here's hoping it's not lineage os related.
Click to expand...
Click to collapse
It's stock charger bro.
Using the stock charger, a qc2.0 one (given with the international version of MI5), I get about 2200ma - 2300ma. I haven't tried a quick charger 3.0. However, check your kernel as well. The stock one of Lineage OS have an issue with quick charging, working once only after boot. I use DragonXia kernel and the qc works all the time.
To check if it is kernel issue, shutdown your phone and them connect the charger. I will start charging but using the recovery/boot kernel based on marshmallow, which (at least for me) hasn't got the issue of qc. Observe then the speed of charge and report.
georgekav33 said:
Using the stock charger, a qc2.0 one (given with the international version of MI5), I get about 2200ma - 2300ma. I haven't tried a quick charger 3.0. However, check your kernel as well. The stock one of Lineage OS have an issue with quick charging, working once only after boot. I use DragonXia kernel and the qc works all the time.
To check if it is kernel issue, shutdown your phone and them connect the charger. I will start charging but using the recovery/boot kernel based on marshmallow, which (at least for me) hasn't got the issue of qc. Observe then the speed of charge and report.
Click to expand...
Click to collapse
Tested a mi5, same variant as mine, just today, with same lineage OS version. Also original charger and cable. Values are the same as yours, well above mine.
However, my original cable is defective, and has been refunded as the phone wasn't being recognized on the pc (which was a problem when flashing roms). A new one is in the mail, and in a day or two I suspect it'll solve the issue. I'll let you know.
Keep in mind apps are a bad way to check for QC capability.
My xiaomi stock charger puts out 1,8A @ 6V with 70% full battery(the higest current is being used between 20-50%, i'll try that later on)
Ampere only shows battery voltage(3,7-4,2V) instead of charging voltage and the ampere display is way off actual current
Hi guys, do you anybody to know where I can buy charger with EU wall conectors for Find X , but with superVOOC charging . I have FindX PAHM00 from China with original charger but chinesse drawer pins with socket adapter from Chinese to European socket does not help much. The charger constantly falls off the reduction. 14 days I'm looking for the superVOOC charger itself but it does not work. Last week, I discovered in Mediamarkt in the Netherlands that they did not offer this phone but the charger itself. I know that even the Lamborghini edition has the same charger with European connectors, but I have not even found it here.
Impossible, you need a special battery to have super vooc not just a charger.
Yes I know and I have with model PAHM00 to buying in China shop?
10.3.2.0
https://bigota.d.miui.com/V10.3.2.0.PCOMIXM/miui_GINKGOGlobal_V10.3.2.0.PCOMIXM_857e1900bf_9.0.zip
https://bigota.d.miui.com/V10.3.2.0...XM_20190913.0000.00_9.0_global_78303ebdfd.tgz
New links will be posted here.
This is original from xiaomi ?
New links will be posted here.[/QUOTE]
Can I change Chinese rom to This version with Mi Flash Tool?
Is this version with Google dialer app?
I bought Note 8 for a friend yesterday. It has the latest Global firmware installed. But I noticed one thing, after changing theme the dialer and message app icon is not changed. Even after applying default theme these 2 icon is not changing. Could it be firmware bug?
try to turn off the dark mode
Redmi note 8 is only 10w? I thought it's 18w
iamROOTX said:
Redmi note 8 is only 10w? I thought it's 18w
Click to expand...
Click to collapse
Supports 18W charging but in-box charger is 10W.
Pro version comes with 18W charger.
goldenevil47 said:
Supports 18W charging but in-box charger is 10W.
Pro version comes with 18W charger.
Click to expand...
Click to collapse
But some unboxing vid on yt says the charging brck is 18w for rmn8. Or global vr only has 10w charger?
iamROOTX said:
But some unboxing vid on yt says the charging brck is 18w for rmn8. Or global vr only has 10w charger?
Click to expand...
Click to collapse
Indian variant have 18W charger other regions like Pakistan with global variant have 10W charger
---------- Post added at 10:06 AM ---------- Previous post was at 10:04 AM ----------
Shuvo_bd said:
I bought Note 8 for a friend yesterday. It has the latest Global firmware installed. But I noticed one thing, after changing theme the dialer and message app icon is not changed. Even after applying default theme these 2 icon is not changing. Could it be firmware bug?
Click to expand...
Click to collapse
It's a shame that global variant have no MIUI dilaer and sms app therefore no theme changing of these app. Solution could be to replace with Indian Rom once its out and safe to replace
iamROOTX said:
But some unboxing vid on yt says the charging brck is 18w for rmn8. Or global vr only has 10w charger?
Click to expand...
Click to collapse
Global is 10W. Indian 18W
Guys why system isnt smooth here miui 10.3.5.0
Hi guys, I have this annoying issue with the Mi 11 Pro: even if I use the original Xiaomi charger of 65 or 67 (I forgot the power) W, the phone only charges in 55 minutes, which makes me almost crash it with a hammer )). It is very annoying. It is on the second charge and does the same. Chinese version, used in Europe. Latest official ROM, no alterations. Any idea why? Thank you!
Maybe the cable, because you have buy this model in Shengen Trading ? When you plug your phone have you the notification "Mi TURBO CHARGE" ? (like the screenshot)
Yes yes, Mi Turbo Charge. ... In the meantime I realized smth: should it be the new 67W charger? Cause the one I have is the "old" 65W charger.