Hello,
I have an AUKEY CB-C32 USB hub with Ethernet adapter. I tried (just out of interest) if this device is working with my Nexus 5X. But the problem is, that my phone does not recognize the adapter. Nothing happens when I connect the adapter to the Nexus. Also the LED indicator on the adapter does not shine.
Why is this device not recognized?
Best regards,
wewa
PS: Yes, I connected the correct cable/port to my phone.
Related
Alright so i bought a usb powered hub, a usb OTG cable, and a usb DAC. I can get the usb DAC working fine by hooking everything up but i cannot get the Nook to charge while in USB host mode. Is this a problem with the settings on the Nook or the USB hub i bought? Also is there any way to charge the nook at 2A while in USB host? I assume this would require a custom cable but i have found very limited information on the internet.
desitdt said:
Alright so i bought a usb powered hub, a usb OTG cable, and a usb DAC. I can get the usb DAC working fine by hooking everything up but i cannot get the Nook to charge while in USB host mode. Is this a problem with the settings on the Nook or the USB hub i bought? Also is there any way to charge the nook at 2A while in USB host? I assume this would require a custom cable but i have found very limited information on the internet.
Click to expand...
Click to collapse
I could be wrong or downright delusional, but I didn't think you could (or worse yet, could cause damage if you tried).
Sent from my Nexus 7 using xda premium
Hi friends,
I want to attach to my touchpad memory card reader and external hard drive.
I wonder if it will be possible instead of buying Y cable and connect it to the OTG, to use my existing USB hub and connect to him the devices and the external battery bank.
Will it work?
Thanks
avizov2 said:
Hi friends,
I want to attach to my touchpad memory card reader and external hard drive.
I wonder if it will be possible instead of buying Y cable and connect it to the OTG, to use my existing USB hub and connect to him the devices and the external battery bank.
Will it work?
Thanks
Click to expand...
Click to collapse
im assuming youre talking about doing this in android 4.0.x +. if so then yes you should be able to connect an externally powered usb hub to the OTG cable and connect more than one device at a time.
Thanks
haxin said:
im assuming youre talking about doing this in android 4.0.x +. if so then yes you should be able to connect an externally powered usb hub to the OTG cable and connect more than one device at a time.
Click to expand...
Click to collapse
Yes android 4.
to be precise, I don't have powered usb hub.
I have normal usb hub which I will connect him the power with usb battery bank device.
will it work?
avizov2 said:
Yes android 4.
to be precise, I don't have powered usb hub.
I have normal usb hub which I will connect him the power with usb battery bank device.
will it work?
Click to expand...
Click to collapse
Yes. You need to give power to the periphal usb devices. I tried the same yesterday, without problems.
Hey all
I have a powered Belkin USB hub (this one: http://www.belkin.com/us/F4U040-Belkin/p/P-F4U040), coupled with an OTG cable which I know work together, as my Kindle Fire recognizes all USB devices through this setup (Keyboard, Mouse, Flash Drive etc).
I was surprised to find that my HP touchpad does not recognize any devices connected to this hub.
I did some diagnostics with USB Device Utility, and the touchpad recognizes my USB OTG cable, as it shows as a 'Qualcomm On-Chip EHCI Host Controller'.
The touchpad simply does not see anything plugged into the hub, be it a keyboard, mouse or flash drive.
Please help me here, guys!
What am I doing wrong?
Thanks
MainCourse said:
Hey all
I have a powered Belkin USB hub (this one: http://www.belkin.com/us/F4U040-Belkin/p/P-F4U040), coupled with an OTG cable which I know work together, as my Kindle Fire recognizes all USB devices through this setup (Keyboard, Mouse, Flash Drive etc).
I was surprised to find that my HP touchpad does not recognize any devices connected to this hub.
I did some diagnostics with USB Device Utility, and the touchpad recognizes my USB OTG cable, as it shows as a 'Qualcomm On-Chip EHCI Host Controller'.
The touchpad simply does not see anything plugged into the hub, be it a keyboard, mouse or flash drive.
Please help me here, guys!
What am I doing wrong?
Thanks
Click to expand...
Click to collapse
Are you sure that's powered? The picture doesn't show any DC connectors. Is it powered by something like a mini USB to USB cable on the back? If so, that might not be enough to power the device and the peripherals attached to the ports.
Belkin Hub
Daistaar said:
Are you sure that's powered? The picture doesn't show any DC connectors. Is it powered by something like a mini USB to USB cable on the back? If so, that might not be enough to power the device and the peripherals attached to the ports.
Click to expand...
Click to collapse
The belkin does have an external dc power supply and is not powered via usb
I think you need a Y cable even with a powered hub as its purpose is to inject power back into the OTG chip in the Touchpad.
Does anybody know of a working MHL adapter with at least a 12" USB cable?
I tried these and they do not work (work probably 1 out of 20 times if you keep plugging/unplugging)
http://www.amazon.com/gp/product/B00KGP5SEC/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B009LAZG2M/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I have an old samsung (link below) which works but the USB cable is very short
http://www.amazon.com/gp/product/B009LAZG2M/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Thanks!
has anybody tried this?
http://www.ebay.com/itm/3M-MHL-Micr...Phone_PDA_Cables_Adapters&hash=item3f3a100cdd
Is the Skiva MHL Micro USB to male HDMI cable (6.5 feet) for Samsung Galaxy S3 (SIII LTE i9300 L710 i747... the one that works with your M8?
I really want to get one that will work.
daniel2744 said:
Is the Skiva MHL Micro USB to male HDMI cable (6.5 feet) for Samsung Galaxy S3 (SIII LTE i9300 L710 i747... the one that works with your M8?
I really want to get one that will work.
Click to expand...
Click to collapse
No, only the old Samsung one works consistently which has the short usb cAble.
I bought this one: http://www.ebay.co.uk/itm/171391851548
works perfectly as I think most will.
It's all down to the sequence you plug the cables in.
Power>Phone>HDMI
Cant remember the correct sequence but try it out.
COPIED FROM AMAZON AD.
1. connect the charger to the adapter cable and power supply
2. connect the adapter cable to the HDTV device
3. connect the Smartphone to the adapter cable
Westylakey said:
I bought this one: http://www.ebay.co.uk/itm/171391851548
works perfectly as I think most will.
It's all down to the sequence you plug the cables in.
Power>Phone>HDMI
Cant remember the correct sequence but try it out.
COPIED FROM AMAZON AD.
1. connect the charger to the adapter cable and power supply
2. connect the adapter cable to the HDTV device
3. connect the Smartphone to the adapter cable
Click to expand...
Click to collapse
I tried allcombinations before posting and none works consistently with the 2 cables I bought .
With the old Samsung adapter, it doesn't matter which order you plug in phone, power and hdmi.
I don't think all cables/adapters (advertised as 5 pin) are same. It cut open the usb part from the working Samsung adapter and it has 7 wires.
The other non working ones have 5.
If anyone is interested to know, this one works for me most of the time. Doesn't matter which order I plug it in (I usually plug the phone last though)
http://www.ebay.com/itm/3M-MHL-Micr...Phone_PDA_Cables_Adapters&hash=item4185f8bc11
Its 3m in length and requires external power to work. It charges the phone although slower than MHL drains, i.e. your phone will still be discharging while connected via MHL but at a much slower rate.
On my desk, I have an old but reliable USB 2.0 hub, with your standard micro USB cable plugged into one of the ports. On my old phones (Nexus 5, Galaxy S3, HTC One), they would all charge from this cable, even when the hub was not plugged into a host. However, the Z3C seems to not charge at all when plugged into this cable, unless the USB hub is plugged into my Macbook. Anybody else seen this? I know that the hub won't put out much current, but it was awfully convenient to always have a charging cable on my desk regardless of what my laptop was doing.
Thanks!
Old post so probably not needed anymore, but just tested it over here and it just works.
A standaard generiek usb2.0 hub with external powersuply, connected with a usb 2 micousb kabel to the microusb poort of the sony z3c starts charging. It makes nog difference if i put the doc in between for magnetic charging, that works to.
Anyone have a non-functioning USB port? PC doesn't recognize my Z3 compact and it wont charge as well when connected to the PC. The USB port was working when I first got the phone, then suddenly stopped being functional. I cannot even charge through it as well.
Have you tried another cable?
Are you trying to charge from wall adapter to the usb port?
If yes, send to repair.
I have already tried connecting using different cables and PCs/ laptops. Even did a full reset several times. then, suddenly, the uSB connection began working: USB connection to computer and USB charging worked. Mysterious?? Maybe loose connection inside the phone??
I've noticed it won't charge with certain cables, chargers and vehicles. Seems to be hit and miss.