Database Develop

[IMPORTANT]eternal.sumit's IMPLEMENTED GUIDE to LG thrill 4G!!

As per the title I've already tested the stuffs successfully and as per my experience I posted this guide. I want to help you guys too!!
INSTALL LG DRIVERS FOR PC:
1.Extract the zip and install drivers from setup.
http://www.mediafire.com/?eec7g8dekfggwag
ROOT LG Thrill 4G:
1.Make sure your phone is not set to read mass storage only.
Setting>SD card & phone storage setting>uncheck “mass storage only”.
2.Turn on Usb debugging
Setting>application>development>check “USB debugging”
3.Connect phone to PC via USB cable.
4.Be careful don’t click “turn on mass storage” and leave the phone as it is.
IF you are on stock ANDROID 2.2.2(froyo):both megatron_windows and super one click roots your phone.
{however I prefer megatron_windows than super one click as it has less probability to freeze than super one click.when I was on froyo I had to try 2nd time by super one click to root}
IF you are on stock ANDROID 2.3.5(gingerbread):only megatron_windows roots your phone.
Megatron_windows” root:
-After you have followed upto step 4 & connected your phone to PC,open “run” batch file as administrator,from the extracted folder.
-when batch windows pops up press enter .It will start rooting.It will reboot 2 to 3 times your phone while rooting.After it finishes rooting,it will prompt to press any key on batch windows.Hit enter and your phone is rooted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download megatron windows from:
http://vulnfactory.org/blog/2012/02/26/rooting-the-lg-thrill-optimus-3d/
“super one click” root:
- After you have followed upto step 4 & connected your phone to PC,open main super one click app from extracted folder and click “root”,wait for sometime until a message box “ says your phone is successfully rooted “and Run SU test,when it says SU test success your phone is rooted.
Download super one click from:
http://www.apkfullapps.com/2012/01/superoneclick-v233-apk-app.html
Now you can enjoy any root needing powerful apps such as “Titanium backup”.
FLASHING CWM RECOVERY & MAKING YOUR 1ST NANDROID BACKUP:
Flashing CWM is very vital for playing around with custom ROMs and before you flash any custom ROM by CWM it is must to make nandroid backup so that you can flash back to your custom ROM in case anything goes wrong.
Until there’s nandroid backup on your SD card and you don’t replace CWM recovery with your stock recovery you can go to your stock ROM any time you wish and hence there’s no risk of phone brick.
IMPORTANT:YOU CAN ONLY FLASH FROYO BASED CUSTOM ROM ON 2.2.2(FROYO).LG THRILL GINGER BREAD CUSTOM ROMS CAN ONLY BE FLASHED AFTER YOU UPDATE YOUR PHONE FIRMWARE TO ANDROID 2.3.5(GINGERBREAD).
FLASH TOUCH VERSION CWM RECOVERY:
Our LG thrill supports touch CWM recovery which best and efficient among other CWM recovery.so I will guide you through touch recovery.
1. download the "LGP920_CWM_5.8.1.5_Flasher.zip" und unzip folder on your PC:
http://www.mediafire.com/?m0jbk4eprv4b331
2. turn on the USB-Debugging
3. connect your phone via usb with the PC
4. click "LGP920_CWM_5.8.1.5_Flasher.exe" to start the flash tool
5. choose Y to start flashing or N to cancel
6. your phone reboots after finishing
7.press any key to close the tool
HOW TO START INTO CWM-Recovery:
1.turn off your phone
2.start it with holding ower + VolDown(-) + 3D-key
MAKING YOUR 1ST NANDROID BACKUP:
1.Boot into CWM
2.Click “backup and restore”>click “backup”
3.After making backup finishes click “reboot system”.
{Note:copy your backup file to PC.In case you lost backup accidentally oh mass storage you can copy again from PC to mass storage or SD card.Copy “clockwordmod” folder from root of your phone memory or SD card to pc. If you lose backup file from phone paste it back to phone storage or SD card.}
FLASHING CUSTOM ROMs:
1.Boot to CWM recovery
2.go to “wipe data/factory reset” and wipe data
3.go to “wipe cache partition” and wipe cache
4.go to “advanced”>”wipe dalvik cache” and wipe dalvik cache
5.After you have cleared all 3 caches as above,go to”install zip from sd card”>if you have ROM(zip) on sd card select ”choose zip from sd card” else select “choose from internal sdcard”>choose the required ZIP file as ROM and install.
6.when proccess completes Reboot phone and you will boot into your custom ROM when phones starts.
HOW TO RESTORE NANDROID BACKUP IN CASE OF SYSTEM FAILURE:
In case there is problem on your custom ROM.
1.start into CWM Recovery as like instructed earlier.
2.Click” backup and restore”>click “restore”
3.choose the backup file of stock ROM you backed up before,which is named to the date when you created your backup.
4.after the restoration completes click ”reboot system”.
5.when phone restarts it will boot directly to your saved state of stock ROM.
I'VE TREID MY BEST TO BECOME PRECISE.DO IT CAREFULLY & ON YOUR OWN RISK.AVOID BRICKS.
ANY QUESTIONS REGARDING ABOVE ARE WARMLY WELCOMED!!
IF U LIKE MY HARDWORK HIT "THANKS".

I appreciate the hard work you did putting this together, but there's already a couple of these guides on the forum. What's the difference between this guide and TheDarkLeStat's?
Sent from my P920 using xda premium

Markyzz said:
I appreciate the hard work you did putting this together, but there's already a couple of these guides on the forum. What's the difference between this guide and TheDarkLeStat's?
Sent from my P920 using xda premium
Click to expand...
Click to collapse
-firstly, my guide includes procedure to flash touch CWM but Dark lestat guide's for normal CWM without touch capabilities.
-2nd, my guide is more illustrative.
- 3rd ,I have included info on rooting software compatibility with version of android and separate method for different android version,so that any one can root their thrill without problem.
-4th,I have included procedure to flash custom ROM in detail.
-5th,I have included detail procedure on creating nandroid backup.
so this covers most of the guide regarding to LG thrill than that of lestat.

eternal.sumit said:
IMPORTANT:LG THRILL CUSTOM ROMS CAN ONLY BE FLASHED AFTER YOU UPDATE YOUR PHONE FIRMWARE TO ANDROID 2.3.5(GINGERBREAD).FLASHING ROM DOESN’T SUPPORT FOR ANDROID 2.2.2(FROYO).ONLY PROCEED FOR CUSTOM ROM IF YOU HAVE ANDROID 2.3.5(GINGERBREAD) ON PHONE.
Click to expand...
Click to collapse
This is incorrect.
You can flash custom ROMs on FroYo. - FroYo Baseband
You can flash custom ROMs on Gingerbread. - Gingerbread Baseband
There are a couple ROMs that are made for FroYo.
eternal.sumit said:
-firstly, my guide includes procedure to flash touch CWM but Dark lestat guide's for normal CWM without touch capabilities.
-2nd, my guide is more illustrative.
- 3rd ,I have included info on rooting software compatibility with version of android and separate method for different android version,so that any one can root their thrill without problem.
-4th,I have included procedure to flash custom ROM in detail.
-5th,I have included detail procedure on creating nandroid backup.
so this covers most of the guide regarding to LG thrill than that of lestat.
Click to expand...
Click to collapse
My Recovery Manager has stock Android Recovery, ClockworkMod, and Touch ClockworkMod.
Thumbs up on illustration!
FroYo ROMS can be rooted with SuperOneClick without any problems. Gingerbread uses Megatron Root.
I haven't finished the rest of my guide yet. I still have a .txt file with stuff I need to add. The last two are ones that are on the bottom of my list.

The Dark Lestat said:
This is incorrect.
You can flash custom ROMs on FroYo. - FroYo Baseband
You can flash custom ROMs on Gingerbread. - Gingerbread Baseband
There are a couple ROMs that are made for FroYo.
My Recovery Manager has stock Android Recovery, ClockworkMod, and Touch ClockworkMod.
Thumbs up on illustration!
FroYo ROMS can be rooted with SuperOneClick without any problems. Gingerbread uses Megatron Root.
I haven't finished the rest of my guide yet. I still have a .txt file with stuff I need to add. The last two are ones that are on the bottom of my list.
Click to expand...
Click to collapse
As there is already an update for ginger bread.I think flashing custom ROM compatible for 2.3.5 only makes vital sense.so i meant to update firmware to gingerbread to users to enjoy GB based custom ROM.I don't think custom ROM for froyo is good idea,thats why i advise users to update their ROM to gingerbread for enjoying custom GB ROM on it which is stable and fast.
any way what you said is correct.so I am editing the post...

The Dark Lestat said:
This is incorrect.
You can flash custom ROMs on FroYo. - FroYo Baseband
You can flash custom ROMs on Gingerbread. - Gingerbread Baseband
There are a couple ROMs that are made for FroYo.
Click to expand...
Click to collapse
As there is already an update for ginger bread.I think flashing custom ROM compatible for 2.3.5 only makes vital sense.so i meant to update firmware to gingerbread to users to enjoy GB based custom ROM.I don't think custom ROM for froyo is good idea,thats why i advise users to update their ROM to gingerbread for enjoying custom GB ROM on it which is stable and fast.
any way what you said is correct.so I am editing the post...

I have been going CRAZY for the past few weeks trying to root my rogers Thrill 4G with 2.3.5. The Megatron_windows trick worked from the first try. As did CWM recovery. Thanks a bunch for this how-to.

[Q] How do i turn back to clean stock rom

Here I can't really find the correct answer for this (or i just don't understand it)
I want to remove EVERYYYYTHING in my phones and sd card
Include the apps and roms too
And return to factory stock
I don't want to backup anything at all
(except sync my contacts)
I already download my stock roms
But of course i still do nothing with it
I am using Ultimate N7000 XXLSZ JellyBean 4.1.2 v5.2 But it seem to eat more battery than i needed
Even turned off about 2 hours it drain 3 percents battery
And turn on = EXTREMELY fast drain (with screen on)

First ... manually delete all data on internal and external SD card by mounting it as USB storage.. then boot into recovery... go to Philz settings and choose "Clean Before New Rom Install" ... then go to advanced and choose reboot download.. connect to pc and flash stock rom

nokiamodeln91 said:
First ... manually delete all data on internal and external SD card by mounting it as USB storage.. then boot into recovery... go to Philz settings and choose "Clean Before New Rom Install" ... then go to advanced and choose reboot download.. connect to pc and flash stock rom
Click to expand...
Click to collapse
I Clear manually delete all data
Then boot to recovery go to PhilZ Settings
But there is no "Clean Before New Rom Install"
There is only
Open Recovery Script
Custom Backup and restore
Aroma file manager
GUI Preferences
Save and restore settings
Reset All Recovery Settings
About
+++++Go Back+++++
PhilZ Touch 4
CWM Base version : 6.0.2.8

It's changed in the new version. Check in some menus like wipe data/factory reset or philz settings custom backup & restore or others.

Thank!!!
It's Done
Here what i do
Manual delete everything
Boot to recovery
Wipe data/Factory reset
Wipe cache partition
Wipe dalvik cache
Boot to download
Then use odin 3 to flash stock rom

So it's all stock now?

nokiamodeln91 said:
So it's all stock now?
Click to expand...
Click to collapse
Yeah
And there is no root no cwm anything at all
Just like brought from store
Well
Now i got new problem
I am going to root + cwm (PhilZ-cwm6) but there is no kernel version
I hope you know where is kernel version
It thai language
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

First you told us you want to remove everything and return to factory stock etc.
And now you want to root with Philz kernel?
So I guess it was a way to make your device clean.
Why did you install that specific version of ICS for N7000B?
(it's the latest ICS for Thailand and N7000B - maybe that's why)
And you are sure in having a N7000B?
ไม่เข้าใจภาษาไทย - อ่านได้

You can use any ics kernel like ddlrb or xxlrt

ThaiDai said:
First you told us you want to remove everything and return to factory stock etc.
And now you want to root with Philz kernel?
So I guess it was a way to make your device clean.
Why did you install that specific version of ICS for N7000B?
(it's the latest ICS for Thailand and N7000B - maybe that's why)
And you are sure in having a N7000B?
Click to expand...
Click to collapse
It like formating pirate window
Basicly
I want to remove all apps and turn it to stock rom and root it again
Well the reason i install n7000b cause my device is n7000b
Why would i install n7000 anyway if i will i think i better keep custom rom
ThaiDai said:
First you told us you want to remove everything and return to factory stock etc.
And now you want to root with Philz kernel?
So I guess it was a way to make your device clean.
Why did you install that specific version of ICS for N7000B?
(it's the latest ICS for Thailand and N7000B - maybe that's why)
And you are sure in having a N7000B?
ไม่เข้าใจภาษาไทย - อ่านได้
Click to expand...
Click to collapse
กะไว้แล้วว่าต้องเป็นคนไทย
เห็นรูปมีธงชาติไทย

CWM Recovery for ICS?

Hi,
I've using LG Optimus Black for 2 years and haven't upgrade my device with custom ROM. As you know, Instagram doesn't run on ICS and I'm tired of it. Finally I decide install custom ROM. I rooted my phone with UnlockRoot but I can't install CWM Recovery.
What am I doing wrong and what should I do?
Please help me.

IcinizdekiIrlandali said:
Hi,
I've using LG Optimus Black for 2 years and haven't upgrade my device with custom ROM. As you know, Instagram doesn't run on ICS and I'm tired of it. Finally I decide install custom ROM. I rooted my phone with UnlockRoot but I can't install CWM Recovery.
What am I doing wrong and what should I do?
Please help me.
Click to expand...
Click to collapse
If you're rooted, can't you just download CWM ROM Manager from the play store? I've always used that for installing 970 ROMs.

IcinizdekiIrlandali said:
Hi,
I've using LG Optimus Black for 2 years and haven't upgrade my device with custom ROM. As you know, Instagram doesn't run on ICS and I'm tired of it. Finally I decide install custom ROM. I rooted my phone with UnlockRoot but I can't install CWM Recovery.
What am I doing wrong and what should I do?
Please help me.
Click to expand...
Click to collapse
Here
N00BY0815 said:
Please do not try to install CWM on ICS. You'll get a security error and will have to unbrick your device!
If you already have ICS stock on your phone, there is a simply procedure, that will allow you to get CWM again, but you'll have to install a new ROM via Smartflashtool.
1. You need a V20 ROM, that has been patched with CWM, like THIS ONE.
2. You need Smartflashtool
3. Download Superuser.zip from here: http://downloads.noshufou.netdna-cdn...arm-signed.zip and put it on your SD card.
4. Unpack the V20S patched .7z file
5. Flash the .bin file using SFT
6. Your phone will reboot to recovery
7. Do a factory reset and if you wanna stick with a rooted v20S, just flash the superuser.zip and reboot. If you already want to install a custom ROM, just put that on your sd card and flash it (see how to install a custom ROM).
8. Reboot and enjoy your new ROM
Click to expand...
Click to collapse
A v20 firmware (stock ROM) with CWM included you can download from here
And the link to Superuser.zip seems to be broken..download this(here is also included a firmware...you can use this firmware or you can download another from link above), here you can find Smartflashtool, Superuser.zip and the USB driver( you need to install this to let smartflashtool(also shorted as SFT) to detect your phone)
A detailed tutorial about how to flash with SFT:
An explanation about this tutorial.. the files from 3 and 4 (CP and AP) are the firmware files (this is what you had downloaded)
radkor said:
1. Unpack SFT.rar that contains SmartFlash Tool program.
2. Unpack, preffered C: drive, firmware pack BIN_LGP970AT-00-V10a-EEU-XXX-MAY-09-2011_0.zip
Inside there will be 2 files: LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_AP.bin i LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_CP.fls.
3. Run B_SmartFlashTool_Extern.exe
4. Choose:
1) ROM copy D/L bookmark
2) in Select mode choose Normal mode
3) choose CP file: LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_CP.fls
4) choose AP file: LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_AP.bin
*) connect phone in S/W Update mode with battery in it (on the phone that is switched off, plug in USB cable WHILE HOLDING Vol+ button)
5) choose COM port.
6) choose LGE Mobile USB Serial Port in Communication Driver
7) click Start and wait till end.
It takes about 3 mins to flash.
After successfully flashing, phone will reboot and make Factory Reset.
And that's all!
Settings:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing:
Finished:
Click to expand...
Click to collapse
PS: Ask me if you don't understand something.. it really worth to use a custom ROM..but just be careful to not brick your phone
LINKS:
Firmware
Superuser.zip
Tools

androcraze said:
If you're rooted, can't you just download CWM ROM Manager from the play store? I've always used that for installing 970 ROMs.
Click to expand...
Click to collapse
I've tried but that can't help me.
@raulx222
I've done every step. I flashed 20D ROM and my phone was reboot. In CWM screen, I did factory reset and select "choose a .zip from SD card" Superuser.zip. After that I rebooted my phone. But I want to install custom ROM (example: Nameless ROM) now, what will I do? So how can I see CWM screen again?

IcinizdekiIrlandali said:
I've tried but that can't help me.
@raulx222
I've done every step. I flashed 20D ROM and my phone was reboot. In CWM screen, I did factory reset and select "choose a .zip from SD card" Superuser.zip. After that I rebooted my phone. But I want to install custom ROM (example: Nameless ROM) now, what will I do? So how can I see CWM screen again?
Click to expand...
Click to collapse
Now, you choose a custom ROM..i don't recomand you Nameless ROM because isn't stable yet, but you can try it...i noticed that they are working hard to that ROM:-? it will be great
I recommend you IZS. It is a very stable and fast ROM based on ICS .. look here ..you have somewhere a BIG title called "INSTRUCTIONS" every ROM has flash instructions.. there are same instructions to flash a ROM..but to flash an update to a ROM may be different, so pay attention to update instructions to every ROM
Now to acces the CWM you can download from google store this app
So..basically to flash a ROM you have to:
1) Go in recovery menu (CWM)
2) Do a data,cache and dalvik cache wipe (you will find dalvik cache wipe to tab "advanced")
3) Choose: flash zip from sd card
4) Choose ROM zip and flash it

raulx222 said:
Now, you choose a custom ROM..i don't recomand you Nameless ROM because isn't stable yet, but you can try it...i noticed that they are working hard to that ROM:-? it will be great
I recommend you IZS. It is a very stable and fast ROM based on ICS .. look here ..you have somewhere a BIG title called "INSTRUCTIONS" every ROM has flash instructions.. there are same instructions to flash a ROM..but to flash an update to a ROM may be different, so pay attention to update instructions to every ROM
Now to acces the CWM you can download from google store this app
Click to expand...
Click to collapse
I don't want to use ICS anymore because of Instagram. Btw, when I install Nameless ROM, it says "Installation aborted"

IcinizdekiIrlandali said:
I don't want to use ICS anymore because of Instagram. Btw, when I install Nameless ROM, it says "Installation aborted"
Click to expand...
Click to collapse
Tell me exactly what you did

raulx222 said:
Tell me exactly what you did
Click to expand...
Click to collapse
I couldn't go to CWM screen so I've done every step again. But this time, I didn't choose "superuser.zip". I chose zip which is Nameless ROM. But it says "Installation aborted"

IcinizdekiIrlandali said:
I couldn't go to CWM screen so I've done every step again. But this time, I didn't choose "superuser.zip". I chose zip which is Nameless ROM. But it says "Installation aborted"
Click to expand...
Click to collapse
You had used the right namelessROM file? http://sourceforge.net/projects/nam...less-4.4.2-20140412-p970-NIGHTLY.zip/download
That supposed to work..try again like this:
-Download this and put it on your sd card http://goo.gl/rurEY ...these are GAPPS..in other words this is google store app..not all ROMs have GAPPS included, some time you have to flash it by your own
-go in CWM
-be sure that you do a data wipe ,cache wipe and dalvik cache wipe..
-install ROM with flash zip from sd card
-install GAPPS with flash zip from sd card
-reboot

raulx222 said:
You had used the right namelessROM file?
That supposed to work..try again like this:
-Download this and put it on your sd card...these are GAPPS..in other words this is google store app..not all ROMs have GAPPS included, some time you have to flash it by your own
-go in CWM
-be sure that you do a data wipe ,cache wipe and dalvik cache wipe..
-install ROM with flash zip from sd card
-install GAPPS with flash zip from sd card
-reboot
Click to expand...
Click to collapse
Done! :laugh:
I think I've download wrong file. Thank you very much! :good: Have you any suggestion me for ROM? Except for ICS and Nameless.

IcinizdekiIrlandali said:
Done! :laugh:
I think I've download wrong file. Thank you very much! :good: Have you any suggestion me for ROM? Except for ICS and Nameless.
Click to expand...
Click to collapse
Uhm..you can try cyanogenmod it is very "default" but many ROMs are based on cyanogenmod
Zeus is nice:-?..in my opinon I think Zeuz is the best ROM based on android 2.3

Instagram doesn't work on Nameless ROM, too.

IcinizdekiIrlandali said:
Instagram doesn't work on Nameless ROM, too.
Click to expand...
Click to collapse
Probably doesn't support OB
Look here http://forum.xda-developers.com/showthread.php?t=2256363 you may find something useful
Edit: I had modified the link from the first post..i had replaced the Superuser.zip with another one

raulx222 said:
Probably doesn't support OB
Look here http://forum.xda-developers.com/showthread.php?t=2256363 you may find something useful
Edit: I had modified the link from the first post..i had replaced the Superuser.zip with another one
Click to expand...
Click to collapse
Yeah, I know it. I thought Instagram may be improved and updated it. But this hasn't fixed yet. So I installed Instagram 3.4.0 but it says "Your version of Instagram out of date". Then I updated and install again 3.4.0 when I'm login, but I seem log out.

[ROM] [6.0.1] [OFFICIAL] [T810] [Stock - Rooted - Odexed - Uninstallable Apps]

GALAXY TAB S2 - 6.0.1 STOCK ROOTED ROM​
You need to have a custom recovery installed on your device before flashing this ROM!
This ROM was designed for daily use and has been optimized to allow users to uninstall most apps which were previously locked into system memory. This means more control over your tablet and more available memory should you want or need it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Big thanks to Superr, ashyx, and pvsgh!
DOWNLOAD - ODEXED VERSION
HOW TO INSTALL:
-Copy .zip file to your SD Card
-Power off your tablet
-Reboot into Recovery Mode by pressing [Power + Volume Up + Home]
-Install the .zip / reboot when completed
If you appreciate my work and would like to buy me a drink, you may donate at the link below. Thanks are always appreciated!

*Reserved

Nice rom
Thanks, great work!!!! Greatly appreciate the time taken to make this! here's a drink on me

It doesnt boot, leave it more than 20 minutes and keep showing samsung logo.

Thanks!!!
What are the known bugs in it? Appreciated your work..
Could we have a more pictures of it please

Damdlt25 said:
It doesnt boot, leave it more than 20 minutes and keep showing samsung logo.
Click to expand...
Click to collapse
I would suggest wiping cache, data, and dalvik prior to installing to clear any previous files. Bear in mind that when you see the Samsung logo it is installing the system files behind the scenes. It typically takes about 5 minutes before you get to the welcome set up screen. Please also confirm this is for your device T810 with Exynos processor.
gambaa said:
Thanks!!!
What are the known bugs in it? Appreciated your work..
Could we have a more pictures of it please
Click to expand...
Click to collapse
I have not encountered any bugs. This is based off of bone stock and includes all of the originally included apps but now allows you to de-bloat the rom yourself and uninstall incessant apps. I welcome you to post any finding you encounter while using the rom. Enjoy!

Not sure if this is a bug or just my device ...
I started using this rom a few days ago (the easy-to-flash rooted stock is very nice). But I've noticed that now I have to reenter the password every time I connect to a network. I'm hoping not to have to do a factory reset to get the tablet to start remembering networks again.

chris1683 said:
GALAXY TAB S2 - 6.0.1 STOCK ROOTED ROM​
You need to have a custom recovery installed on your device before flashing this ROM!
This ROM was designed for daily use and has been optimized to allow users to uninstall most apps which were previously locked into system memory. This means more control over your tablet and more available memory should you want or need it.
Big thanks to Superr, ashyx, and pvsgh!
DOWNLOAD - ODEXED VERSION
HOW TO INSTALL:
-Copy .zip file to your SD Card
-Power off your tablet
-Reboot into Recovery Mode by pressing [Power + Volume Up + Home]
-Install the .zip / reboot when completed
If you appreciate my work and would like to buy me a drink, you may donate at the link below. Thanks are always appreciated!
Click to expand...
Click to collapse
Mate, how to root T715?
Any posts of that, as am unable to locate any out here.

vdbhb59 said:
Mate, how to root T715?
Any posts of that, as am unable to locate any out here.
Click to expand...
Click to collapse
In the S2 General section.... http://forum.xda-developers.com/tab-s2/general/guide-root-tab-s2-t3205019

urquiagal said:
I started using this rom a few days ago (the easy-to-flash rooted stock is very nice). But I've noticed that now I have to reenter the password every time I connect to a network. I'm hoping not to have to do a factory reset to get the tablet to start remembering networks again.
Click to expand...
Click to collapse
I just tried to recreate the issue that you described and I cannot. I switched between 3 saved wi-fi networks and they all connected without having to add the passwords. Did you wipe all data and cache prior to installing my rom?

Is this an international version?
I am looking for the dutch version of 6.0.1 but sammobile only offers 5.0.2

djremcop said:
Is this an international version?
I am looking for the dutch version of 6.0.1 but sammobile only offers 5.0.2
Click to expand...
Click to collapse
Did you try changing the language at the welcome screen after flashing?

Won't boot system
Won't boot system.
After installing (wipe data, dalvik, cache, int. storage), reboot, boot screen shows "kernel is not seandroid enforcing", then automatically reboot again to recovery.
T810
TWRP 3.0.2-0
Previously installed Resurrection Remix, then Dirty Unicorns, both worked ok.
Maybe a kernel issue?
Click to expand...
Click to collapse
Fixed, installed after stock 6.0.1

Is there a update soon?

At last! God bless u for this ROM.

chris1683 said:
I just tried to recreate the issue that you described and I cannot. I switched between 3 saved wi-fi networks and they all connected without having to add the passwords. Did you wipe all data and cache prior to installing my rom?
Click to expand...
Click to collapse
I hate to leave things hanging, and I especially hate to cast doubt on a great ROM.
It's been ages, but I think I finally discovered the answer on another forum. The ROM was not the problem
The problem happened after I flashed several ROMs and other files repeatedly trying to find a way to hide root on my T810. I think that somehow the ownership of wpa_supplicant.conf got messed up. This appears to be working:
Enter the following commands in terminal (the place I found this said to use ADB, but the terminal in TWRP worked for me).
Code:
# cd /data/misc/wifi
# chown system.wifi wpa_supplicant.conf
# reboot

[RECOVERY][S6500/D] TWRP 3.0.2.0 For Galaxy Mini 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an unofficial port of the TWRP recovery for the Galaxy Mini 2.
There are 2 Version : Odin And Flashable Version
What Working :
Everthing
Instructions :
*For Odin
- Download Odin 3 Link :
http://samsungodin.org/download/Odin3_v3.10.7.zip
Download Odin Package
Reboot phone to Download Mode
Click On AP and Select Odin Package suitable for your Phone
Click Start
Reboot to Recovery And Enjoy
*For Zip Packages
Download Zip package suitable for your Phone
Copy to your SD card
Install the Package
Reboot And Enjoy
-Download Links
*Odin Packages
S6500 : https://drive.google.com/file/d/1TUNcLo12YGYAH3B5rHv_m0MfaaxWtspr/view
S6500D : https://drive.google.com/file/d/1Uvx-YdMAKlHbFrQonA4pnC1JS2B6AKTM/view
*Zip Packages
S6500 : https://drive.google.com/open?id=1sXKYrjfjj4tgkA1XoDeM3CmJMzg3tQi8
S6500D :[URL="https://drive.google.com/open?id=174_JiZP6c52KGsaptJX_rlvavB3FaJOD"]https://drive.google.com/open?id=174_JiZP6c52KGsaptJX_rlvavB3FaJOD[/URL]
Credits :
-lorn10 "special thanks for you"
-TheWhisp
-Samsung
if you consider Donating thanks
XDA:DevDB Information
[RECOVERY][S6500/D] TWRP 3.0.2.0 For Galaxy Mini 2 , ROM for the Samsung Galaxy Mini
Contributors
Shadow Of Leaf
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2018-08-18
Last Updated 2018-08-18

After installing twrp the power button of my mini 2 died. RIP.

sooyongjie said:
After installing twrp the power button off my mini 2 died. RIP.
Click to expand...
Click to collapse
Can you explain more your issue with TWRP ??

Shadow Of Leaf said:
Can you explain more your issue with TWRP ??
Click to expand...
Click to collapse
No, it's the device's problem. I pressed on the power button too hard. Couldn't even boot the device now to try out your recovery :/

sooyongjie said:
No, it's the device's problem. I pressed on the power button too hard. Couldn't even boot the device now to try out your recovery :/
Click to expand...
Click to collapse
Ah , so Its Hardware Related , I hope you fix your phone for test twrp

Sadly after flashing Odin package for S6500D I end up with white screen (adb works fine), after several restarts it booted normally, what may cause this?

fix twrp in s6500L. Not install rom.
I have the S6500L. install without problems with odim the twrp-S6500D, but does not recognize the sd card. Then install the twrp-S6500, had start problems and when start could not install the rom 3.4, none of the 2 rom; but if you recognize me the sd card. (With the ClockWorkMod 6.0.x- s6500D it works without problems, but it does not install the latest rom)
.
From scratch, start the process from the custom rom. Much care; After formatting ext4 in Data, do not forget to restart and then wait less than 5 minutes for the new rom to start. At the end install the rom s6500, since the twrp-S6500D does not recognize the microSd. Excellent work, thanks to the developer.:good:

Halamix2 said:
Sadly after flashing Odin package for S6500D I end up with white screen (adb works fine), after several restarts it booted normally, what may cause this?
Click to expand...
Click to collapse
Similar problem here, but with regular S6500.
I always end up with white screen but if I wait long enough to screen actually auto lock itself and I press the home button I"ll get the image, than I just have to swipe to unlock it and I can use TWRP.
Unofrtunately now this problem isnt limited just to TWRP but it manifested also in actual android system too... now when I turn off the screen with power button or I will try to wake up the phone with power button I will get white screen... than I have to wait for auto lock screen and than when I wake the phone with home button everything seems to work normally

For me this TWRP build works absolutely perfect, - no white screen issue.
I have a S6500 (S6500XXMD1) and I installed TWRP 3.0.2.0 with the zip file TWRP-v3.0.2.0-jena_only.zip from an SD card.
I had previously an older TWRP build installed which was itself installed from an CWM-6.0.5.1 build.
Great work Shadow Of Leaf! :good:

elmejorj said:
I have the S6500L. install without problems with odim the twrp-S6500D, but does not recognize the sd card. Then install the twrp-S6500, had start problems and when start could not install the rom 3.4, none of the 2 rom; but if you recognize me the sd card. (With the ClockWorkMod 6.0.x- s6500D it works without problems, but it does not install the latest rom)
.
From scratch, start the process from the custom rom. Much care; After formatting ext4 in Data, do not forget to restart and then wait less than 5 minutes for the new rom to start. At the end install the rom s6500, since the twrp-S6500D does not recognize the microSd. Excellent work, thanks to the developer.:good:
Click to expand...
Click to collapse
SD Card bug solved in TWRP S6500D
Test And Report

its still white screen for gt-s6500d

Halamix2 said:
Sadly after flashing Odin package for S6500D I end up with white screen (adb works fine), after several restarts it booted normally, what may cause this?
Click to expand...
Click to collapse
it still white screen for my S6500D, how to solve it ?

this phone still alive

I tried to install twrp from the sd card, it gives an error. When I loaded it from Odin3, the counter count changed from no to yes (1 counts) and at the same time, there is an sd card error on the s6500d. My advice is to install cwm, maybe I'll install it too.

TWRP 3.0.2.0 SD card not working on S6500D. How I fix this issue?

Dear All
I have S6500D.
After installing twrp via odin.
Sd card not detected.
Any solution.
Any custom rom recomendation?

Charbel1979 said:
Dear All
I have S6500D.
After installing twrp via odin.
Sd card not detected.
Any solution.
Any custom rom recomendation?
Click to expand...
Click to collapse
https://www.dropbox.com/s/kfxgpg1liqh14dh/cwm-6.0.3.3-b2-jena.tar.md5 try this.

roms5830i3232323 said:
https://www.dropbox.com/s/kfxgpg1liqh14dh/cwm-6.0.3.3-b2-jena.tar.md5 try this.
Click to expand...
Click to collapse
What custom rom can i flash with this CWM?

Charbel1979 said:
What custom rom can i flash with this CWM?
Click to expand...
Click to collapse
CyanogenMod 10. But cyanogenmod 10 has no working download link. If you want to install CyanogenMod 11, you need to install CWM 6.0.5.1 from CWM recovery. But the CWM 6.0.5.1 download link no longer works.

roms5830i3232323 said:
CyanogenMod 10. But cyanogenmod 10 has no working download link. If you want to install CyanogenMod 11, you need to install CWM 6.0.5.1 from CWM recovery. But the CWM 6.0.5.1 download link no longer works.
Click to expand...
Click to collapse