Database Develop

[ROOT] MediaPad M3 10 BAH-L09 Success!

First- I am NOT Responsible if you brick your Device! You do everything at your own Risk!
As I cannot find successfull thread here guiding to root this tablet I am posting the success with rooting with Magisk, all is seen on Russian forum 4pda,but the firmware I am on is not here ,it was little hard to find it(paid) but at the end it works, I have full root:
1 .You must have UNLOCKED BOOTLOADER!!! You can do it here are 2 threads guiding to it,mine was with DC_unlocker-4USD;
2. You must download Magisk from its original thread :Link
3.You must Look at which firmware you are,download the patched ones :С170B003
С170B253
C100B270
Or you can download you full Rom, extract it using Huawei Firmware Extractor extract the BOOT.img from UPDATE.APP file transfer it to your tablet and using Magisk--> install choose boot.img and patch it, then copy the patched_boot.img from folder "Downloads" in the internal memory back to PC,rename to boot.img.
4.You must have installed ADB and fastboot.
5.Using fastboot command on PC install the patched boot.img to tablet:
-First on your tablet enable Developer Options, thick Enable OEM Unlock,thick USB Debugging on,when connected to PC must ask for Fingerprint Security Rsa key,thick Always Trust to this PC"
-Second Tunoff Tablet, then hold volume Down button and connect to PC with USB Cable,Fastboot menu must appear: With green at bottom must be written that it is not FRP locked! If so -dont do proceed disable remove Huawei Account if you have one!
-Third-copy patched boot.img to folder where is located ADB and fastboot, then hold shift and right click mouse button and click Open Command Prompt here.
Now on fastboot menu enter following:
fastboot.exe flash boot boot.img
At the end everything must be OK!
Reboot with power button and check in Magisk !
Regards

I just wanted to confirm that this method works for my tablet. My Huawei Mediapad M3 10.1" BAH-L09 had bootloader unlocked. Emui5.1.2 and OS 7.0. Following these instructions, I extracted the BOOT.img from the stock ROM, then used Magisk Manager app (6.0.1) to create the patched-boot.img. Flashing this patched-boot.img using fastboot mode with command:
fastboot flash boot patched_boot.img
My tablet now is ROOTED without any problems (camera works normally). In short, just follow exactly these instructions and your tablet will be ROOTED

This works for me on BAH-L09 with Build Number BAH-L09C100B270. My Tab ist now rooted with Magisk 17.1 installed. Next i do flash special version of TWRP from the TWRP Builder site. I took the version for the BAH-W09 (WIFI version of the tab) on my own risk. I KNOW thats not the correct version, so please dont criticize.
Installation via fastboot worked. I can boot into Huawei recovery (Power+Vol-up) and TWRP (Power + Vol-Up and Vol-down same time). System boots without problem too. Also i can flash back the original huawei rcovery.img in fastboot mode.
But there is an issue in this TWRP recovery version 3.2.1-0. It does not decrypt data. I tried to format data and flash "no-verity-opt-encrypt". But there is still an Huawei secure mechanism, that wants me to format data in Huawei recovery again. Without format data my tab do not boot into system.
Next step i tried to get TWRP for my device on TWRP-builder app. but no succes because the build queue ist full. So i have to wait...

Sorry but how did you unlock the bootloader?

DragonautMk said:
Sorry but how did you unlock the bootloader?
Click to expand...
Click to collapse
I used dc-unlocker (you can google for). Its easy but it costs ca. 4 €.

Does this method still works on latest ota ?

The4anoni said:
Does this method still works on latest ota ?
Click to expand...
Click to collapse
My M3 10 lite was on latest frmware C100B270 as i used dc-unlocker. Unlock worked well for me.

Does rooting enable you to install Google Services on the tablet? Is so, how?
Is there an international ROM that can be used (with Google tools)

Thanks! Worked for my Mediapad M3 lite 10 (BAH-L09), but now... How can I update Magisk? The Magisk manager doesn't support the version installed.
Can't install twrp either
---------- Post added at 08:40 PM ---------- Previous post was at 07:51 PM ----------
ossizwei said:
This works for me on BAH-L09 with Build Number BAH-L09C100B270. My Tab ist now rooted with Magisk 17.1 installed. Next i do flash special version of TWRP from the TWRP Builder site. I took the version for the BAH-W09 (WIFI version of the tab) on my own risk. I KNOW thats not the correct version, so please dont criticize.
Installation via fastboot worked. I can boot into Huawei recovery (Power+Vol-up) and TWRP (Power + Vol-Up and Vol-down same time). System boots without problem too. Also i can flash back the original huawei rcovery.img in fastboot mode.
But there is an issue in this TWRP recovery version 3.2.1-0. It does not decrypt data. I tried to format data and flash "no-verity-opt-encrypt". But there is still an Huawei secure mechanism, that wants me to format data in Huawei recovery again. Without format data my tab do not boot into system.
Next step i tried to get TWRP for my device on TWRP-builder app. but no succes because the build queue ist full. So i have to wait...
Click to expand...
Click to collapse
The same for me. Have you got the appropiatte twrp recovery?

wanlus said:
Thanks! Worked for my Mediapad M3 lite 10 (BAH-L09), but now... How can I update Magisk? The Magisk manager doesn't support the version installed.
Can't install twrp either
The same for me. Have you got the appropiatte twrp recovery?
Click to expand...
Click to collapse
This is an old post. Development has going forward. Look here:
For a LineageOS rom
https://forum.xda-developers.com/mediapad-m3/development/rom-t3945684
For TWRP
https://forum.xda-developers.com/mediapad-m3/development/twrp-t3914531
For the first step use the 3.2.0 version of TWRP if you are in Huawei's stock Rom.
For me its the best for this moment. Only issue is, that camera dont work in this early lineage rom. But developer is working on it.

ossizwei said:
This is an old post. Development has going forward. Look here:
For a LineageOS rom
https://forum.xda-developers.com/mediapad-m3/development/rom-t3945684
For TWRP
https://forum.xda-developers.com/mediapad-m3/development/twrp-t3914531
For the first step use the 3.2.0 version of TWRP if you are in Huawei's stock Rom.
For me its the best for this moment. Only issue is, that camera dont work in this early lineage rom. But developer is working on it.
Click to expand...
Click to collapse
Ok, thank you so much. I've got installed Twrp properly, and it boots ok... but no more. Now it stays on the recovery home screen. I'll try again

[GUIDE] Root Galaxy A50s with Magisk v19.3 ( Custom Channel Update )

This Root method use Custom Channel Update for Magisk v19.3 by patching to AP tar file. Magisk v19.3 worked stable on Galaxy A50s. As we know latest Magisk version v20.x did not work for Galaxy A50s with random bootloop problem. We can not install Magisk v19.3 normally wihout TWRP recovery, but with Custom Channel Update make it possible. Follow these steps:
1. Download the firmware Galaxy A50s that match with your A50s Model number.
2. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy 3. AP tar file and MagiskManager.apk to your phone.
3. Install Magisk Manager on your phone
4. Open Magisk - Settings - Update Channel select Custom in the custom URL write "https://github.com/topjohnwu/magisk_files/raw/3dec54c8a850660e3420f7668c7fb6dc8f7c199b/stable.json" then refresh Magisk by switch down the screen.* You will see Latest magisk is v19.3.
5. In Magisk Manager: Install → Install → Select and Patch a File
6. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
7. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
8. Make sure the boot loader are unlocked ( OEM options is enabled with grey color )
9. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files.
Important: check “Auto Reboot” and "F. Reset time" only in Options!
10. Magisk is now successfully flashed to your device!
11. After the device is booted up, do the usual initial setup. It need more time and patient.
12. Connect the phone to Internet, if you see Magisk Manager installed, you must uninstall it.* Then Copy Magisk Manager apk file to your phone and install it.
13. Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
14. Done! Your phone root with Magisk v19.3, Enjoy!
Magisk v19.3 worked stable on Samsung Galaxy A50s, watch this video below for visual guide

Good job bro. Looking forward for A50s custom roms

txpxsx said:
Good job bro. Looking forward for A50s custom roms
Click to expand...
Click to collapse
i think we need twrp first before install any custom rom . yeah . would be nice if a50s have ressurection remix and lineage os

HansKila said:
i think we need twrp first before install any custom rom . yeah . would be nice if a50s have ressurection remix and lineage os
Click to expand...
Click to collapse
OH mannnn I really need aosp rom for this phone. I hate to say that I despised OneUI the same as TouchWiz. I'm a pure Android guy, but this phone was the only fit my budget

Can we do that for A20s? (A207M)

dantonio.marte said:
Can we do that for A20s? (A207M)
Click to expand...
Click to collapse
I think you can do that for your A20s, you just need change the firmware with your A20s firmware.

redymedan said:
I think you can do that for your A20s, you just need change the firmware with your A20s firmware.
Click to expand...
Click to collapse
I tried it, but I had blue screen "this phone has been flashed with unauthorized software and is locked....

dantonio.marte said:
I tried it, but I had blue screen "this phone has been flashed with unauthorized software and is locked....
Click to expand...
Click to collapse
How about the bootloader? you must unlock the bootloader first.
Watch this video for unlocking bootloader:

redymedan said:
How about the bootloader? you must unlock the bootloader first.
Watch this video for unlocking bootloader:
Click to expand...
Click to collapse
Yes I did sir

dantonio.marte; said:
Yes I did sir
Click to expand...
Click to collapse
It look the phone is locked, could you show me the screen shot..

Hi sir...
does it work on android 10...?

I want to know if rooting will work on model
I have a Samsung SM-A505GDXS5ATA2 dual sim phone, Can it be rooted. See lots of people rooting the A50 but not sure if my model is able as of yet

The links posted arnt even working for me...

AttoR said:
Hi sir...
does it work on android 10...?
Click to expand...
Click to collapse
Try using this tutorial. It's for a50. But it's also for a50s. I have successfully rooted my a50s on android 10.https://youtu.be/r5VJdXmC-hg
---------- Post added at 04:21 AM ---------- Previous post was at 04:19 AM ----------
shakilsohel said:
Try using this tutorial. It's for a50. But it's also for a50s. I have successfully rooted my a50s on android 10.https://youtu.be/r5VJdXmC-hg
Click to expand...
Click to collapse
For magisk bootloop try this https://youtu.be/FFwf0NADHTQ

shakilsohel said:
Try using this tutorial. It's for a50. But it's also for a50s. I have successfully rooted my a50s on android 10.
Click to expand...
Click to collapse
Work fine sir...
Me too work fine for root android 10...

AttoR said:
Work fine sir...
Me too work fine for root android 10...
Click to expand...
Click to collapse
Have you face any problem with magisk bootloop after rooting ?

shakilsohel said:
Have you face any problem with magisk bootloop after rooting ?
Click to expand...
Click to collapse
No sir...

Advantage of rooting?
After rooting, does it remove the mdm cannot factory reset problem on this a50s?

root my A50
I am planning to root my new device A50 but many people said that it is harmful to root my device and i am inviting hackers and viruses on my phone. is that true? should I root my phone please I want authentic answer?

nutritionride said:
I am planning to root my new device A50 but many people said that it is harmful to root my device and i am inviting hackers and viruses on my phone. is that true? should I root my phone please I want authentic answer?
Click to expand...
Click to collapse
it's depend on what you use after root.
but SafetyNet is now failed at ctsProfile due to Google changed its method recently, so you can't use bank apps and Netflix.

[GUIDE] [TOOL] TWRP Installer + Root Redmi 8 (Olive)

TWRP INSTALLER FOR REDMI 8
​
I want to share my tool for installing TWRP for Redmi 8.Tested on MIUI 11 Global 11.0.10.0 (PCNMIXM). Always take a backup of your data before doing this modifications. I'm not responsible if something went wrong and do it at your own risk!!!
About this tool:
Includes Official TWRP for Redmi 8
Includes ADB and Fastboot
Easy to Use
Files:
TWRP Installer for Redmi 8 - https://androidfilehost.com/?fid=8889791610682873743
Magisk Zip - https://magisk.me/zip/
How to Install TWRP & Root:
Unlock the Bootloader.
Connect your phone with USB cable and put the Magisk zip file to your internal or SD Card
Turn off your device and reboot into fastboot by pressing Vol down and Power button
Extract the TWRP installer zip file
Open TWRP_Installer.bat
Press Enter to proceed
Then press any key to install the TWRP and wait to finish
Press any key again , it will automatically boot into TWRP
Go to Install
Find the Magisk Zip File then flash
Reboot and your done
Congratss!!! You successfully install TWRP and Root your Redmi 8
Notes:
You need to Flash the Magisk after you install the TWRP. So that it will not back to stock recovery and the TWRP is now your permanent recovery.
You can also change the TWRP that I use on this tool. Go to the installer folder and delete the recovery.img then paste the recovery that you want and rename it to "recovery.img"
Credits:
XDA
Xiaomi Redmi 8 Developers
TWRP
Google
THANK YOU FOR USING MY TOOL!!! HAVE A NICE DAY AND GODBLESS ​

I've followed every step im this guide with no errors but after reboot after flashing magisk phone boots to normal mode, nothing different other than magisk manager installed and root checker says phone not rooted. Any idea?

GreenGremlim said:
I've followed every step im this guide with no errors but after reboot after flashing magisk phone boots to normal mode, nothing different other than magisk manager installed and root checker says phone not rooted. Any idea?
Click to expand...
Click to collapse
Did you try to flash it again on TWRP? Or try to open the Magisk Manager App and go to Superuser and allow the root access on the root checker app

MattPRZ said:
Did you try to flash it again on TWRP? Or try to open the Magisk Manager App and go to Superuser and allow the root access on the root checker app
Click to expand...
Click to collapse
Yes tried flash again even did a factory reset and restarted all over and after flashing on twrp I dont have the magisk manager app
Edit: I downloaded and installed magisk manager app but says magisk is not installed.

GreenGremlim said:
Yes tried flash again even did a factory reset and restarted all over and after flashing on twrp I dont have the magisk manager app
Edit: I downloaded and installed magisk manager app but says magisk is not installed.
Click to expand...
Click to collapse
Maybe the root was gone after reset... Flash again the Magisk zip file or install it via the magisk manager
When I first install the magisk , I wait couple minutes and then the magisk manager appears

MattPRZ said:
Maybe the root was gone after reset... Flash again the Magisk zip file or install it via the magisk manager
Click to expand...
Click to collapse
I am trying to install via the magisk manager but I can't seem to see the right option I have tried download only zip file (dont know waht to do next) and also select and patch a file, where i select the downloaded zip file but I get an unssuported/unknown image format and then installation failed

GreenGremlim said:
I am trying to install via the magisk manager but I can't seem to see the right option I have tried download only zip file (dont know waht to do next) and also select and patch a file, where i select the downloaded zip file but I get an unssuported/unknown image format and then installation failed
Click to expand...
Click to collapse
Uninstall that magisk manager , reboot to twrp and flash again the magisk zip file , in my case I wait couple minutes then magisk manager appear

MattPRZ said:
Uninstall that magisk manager , reboot to twrp and flash again the magisk zip file , in my case I wait couple minutes then magisk manager appear
Click to expand...
Click to collapse
Uninstalled, rebooted and flashed again but magisk manager still doesnt appear, I am gonna restart phone and give leave it alone a couple of hours, will let you know how it goes.

MattPRZ said:
Uninstall that magisk manager , reboot to twrp and flash again the magisk zip file , in my case I wait couple minutes then magisk manager appear
Click to expand...
Click to collapse
GreenGremlim said:
Uninstalled, rebooted and flashed again but magisk manager still doesnt appear, I am gonna restart phone and give leave it alone a couple of hours, will let you know how it goes.
Click to expand...
Click to collapse
Update, after restarting phone and not using it for a copuple hours magisk manager still doesnt appear. Question; how to install magisk from magisk manager? Might try install it with the apk I downloaded from magisk manamger website.

GreenGremlim said:
Update, after restarting phone and not using it for a copuple hours magisk manager still doesnt appear. Question; how to install magisk from magisk manager? Might try install it with the apk I downloaded from magisk manamger website.
Click to expand...
Click to collapse
Maybe the magisk is now Installed , but if the magisk manager still not appear , install the magisk manager with the latest version

MattPRZ said:
Maybe the magisk is now Installed , but if the magisk manager still not appear , install the magisk manager with the latest version
Click to expand...
Click to collapse
Installed latest magisk manager, it shows magisk not instaled.

GreenGremlim said:
Installed latest magisk manager, it shows magisk not instaled.
Click to expand...
Click to collapse
That's strange... I never face that problem
Maybe the only solution is download and flash the magisk uninstaller , so that it will remove all the magisk files , and repeat the flashing of magisk

MattPRZ said:
That's strange... I never face that problem
Maybe the only solution is download and flash the magisk uninstaller , so that it will remove all the magisk files , and repeat the flashing of magisk
Click to expand...
Click to collapse
Ok will try that, thanks.

MattPRZ said:
That's strange... I never face that problem
Maybe the only solution is download and flash the magisk uninstaller , so that it will remove all the magisk files , and repeat the flashing of magisk
Click to expand...
Click to collapse
GreenGremlim said:
Ok will try that, thanks.
Click to expand...
Click to collapse
Made another hard reset to phone and I am going to try this https://c.mi.com/thread-3159753-1-1.html will keep you posted.

MattPRZ said:
That's strange... I never face that problem
Maybe the only solution is download and flash the magisk uninstaller , so that it will remove all the magisk files , and repeat the flashing of magisk
Click to expand...
Click to collapse
GreenGremlim said:
Ok will try that, thanks.
Click to expand...
Click to collapse
GreenGremlim said:
Made another hard reset to phone and I am going to try this https://c.mi.com/thread-3159753-1-1.html will keep you posted.
Click to expand...
Click to collapse
So, after ahard reset tried again following yor guide, still not rooted, after that I flashed stock rom to have a clean install and tried the tutorial I posted using a stock boot image patched with magisk and still no root. Is it possible that I am having no luck and you managed to root yours because of different stock roms i.e. Global vs China or Russia roms?

GreenGremlim said:
So, after ahard reset tried again following yor guide, still not rooted, after that I flashed stock rom to have a clean install and tried the tutorial I posted using a stock boot image patched with magisk and still no root. Is it possible that I am having no luck and you managed to root yours because of different stock roms i.e. Global vs China or Russia roms?
Click to expand...
Click to collapse
You flash stock rom via Mi flash tool? Maybe because of the rom that you use... I only tested on Global

MattPRZ said:
You flash stock rom via Mi flash tool? Maybe because of the rom that you use... I only tested on Global
Click to expand...
Click to collapse
Yes I flash stock rom via MiFlash tool, and my rom is Global like yours so that is not the issue. Still haven't figured what's wrong.

GreenGremlim said:
Yes I flash stock rom via MiFlash tool, and my rom is Global like yours so that is not the issue. Still haven't figured what's wrong.
Click to expand...
Click to collapse
Try other magisk version

MattPRZ said:
Try other magisk version
Click to expand...
Click to collapse
Any particular version in mind?

GreenGremlim said:
Any particular version in mind?
Click to expand...
Click to collapse
Try the lower versions like 20.3 , 20.2 and others

Question Realme C25Y RMX3269 ROOT

We can root in an easy way without unlocking the bootloader
I think this method works with all versions realme
Don't forget to activate OEM unlocking From Developer options
1-You must install drivers:
Realme USB Driver - Realme Firmware
From here you can download USB driver for realme mobile phones. The given USB driver is supported only for the Windows operating system
realmefirmware.com
Realme USB Driver - Google Drive
drive.google.com
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
Download SPD Flash Tool R26.21.2801 - Official SPD/Unisoc Flash Tool
Download SPD Flash Tool R26.21.2801 to Flash Stock Firmware on Spreadtrum Smartphone and Tablets.
spdflashtool.com
2-You have to unpack the ROM using SPD_Upgrade_Tool
https://www.gsmmafia.com/ Here are the ROMs
After completing the extraction, make a patch for the boot With Magisk-v24.3
You will get a rooted boot file Replace it with the old boot
In the end, flash the device and you will notice that you have the root
I am attaching an explanatory video

not the group you looking for but thanks for sharing this

gianonceu said:
not the group you looking for but thanks for sharing this
Click to expand...
Click to collapse
thanks.

gianonceu said:
not the group you looking for but thanks for sharing this
Click to expand...
Click to collapse
How can we create realme c25y group in xda

Excuse me I want to ask, will this delete all internal data?

Doly12 said:
Excuse me I want to ask, will this delete all internal data?
Click to expand...
Click to collapse
yes.

Yo, how did you flash it?

Biglet0w said:
Yo, how did you flash it?
Click to expand...
Click to collapse
spd flash tool
turn off the phone. After that, press and hold the Volume Down button and at the same time connect the phone to the PC using the USB cable. You will see that the Upgrade Download program was able to identify the phone and the flashing process will start automatically.

Hi
When I try to call the emergency numbers, I can't, it says that the credit is not enough to make the call
I rebooted and flashed according to the video you posted, but it didn't work
I changed the chip but the same problem remains
Can you give me a solution to this problem

my phone recognize sim but when call people it said cellular is not available, when i use my sim in other phone it work normal, i try flash the rom again but spd tool said error !!!GSM Cali in phone is not calibrated.Reserved[7]:0x00000000,[ID=0x2] pls help

i have rmx3269_11_A.18 and its not on gsmmafia this build number what i do please help

Can i install twrp from c25 or c25s

Hello! I would like to ask for a few questions.
1) At the time of the post, the Magisk version is v24.3. Can I use the latest Magisk v25.2?
2) I've updated my phone to A.41, will downloading A.29 still work since the latest ones aren't downloadable?

Reyproject said:
Hello! I would like to ask for a few questions.
1) At the time of the post, the Magisk version is v24.3. Can I use the latest Magisk v25.2?
2) I've updated my phone to A.41, will downloading A.29 still work since the latest ones aren't downloadable?
Click to expand...
Click to collapse
1) I don't think so.
2)Yes.

JA sunny said:
1) I don't think so.
2)Yes.
Click to expand...
Click to collapse
Successfully rooted the phone. Not updating to Magisk v25.2.
This is my second time flashing since I went into a bootloop.
The first flash, I installed Audio Compatibility Patch Magisk Module, rebooted, speakers were now always on mono, installed Audio Mod Library module, still the same. Tried uninstalling ACP by going through the install prompts when flashing and updated Magisk to v25.2 at the same time. Once I rebooted, it went to bootloop.
Flashed the whole thing again, back with root again. I'll be installing stuff one by one so I can know the cause.
Too bad there's no custom recovery. TWRP or OFRP would be nice.
We can flash recovery using Flashify right? So why hasn't anyone build a custom recovery port yet?

Reyproject said:
Successfully rooted the phone. Not updating to Magisk v25.2.
This is my second time flashing since I went into a bootloop.
The first flash, I installed Audio Compatibility Patch Magisk Module, rebooted, speakers were now always on mono, installed Audio Mod Library module, still the same. Tried uninstalling ACP by going through the install prompts when flashing and updated Magisk to v25.2 at the same time. Once I rebooted, it went to bootloop.
Flashed the whole thing again, back with root again. I'll be installing stuff one by one so I can know the cause.
Too bad there's no custom recovery. TWRP or OFRP would be nice.
We can flash recovery using Flashify right? So why hasn't anyone build a custom recovery port yet?
Click to expand...
Click to collapse
I think you need to have the bootloader unlocked to boot into custom img

elokuba said:
Can i install twrp from c25 or c25s
Click to expand...
Click to collapse
Don't

Reyproject said:
Successfully rooted the phone. Not updating to Magisk v25.2.
This is my second time flashing since I went into a bootloop.
The first flash, I installed Audio Compatibility Patch Magisk Module, rebooted, speakers were now always on mono, installed Audio Mod Library module, still the same. Tried uninstalling ACP by going through the install prompts when flashing and updated Magisk to v25.2 at the same time. Once I rebooted, it went to bootloop.
Flashed the whole thing again, back with root again. I'll be installing stuff one by one so I can know the cause.
Too bad there's no custom recovery. TWRP or OFRP would be nice.
We can flash recovery using Flashify right? So why hasn't anyone build a custom recovery port yet?
Click to expand...
Click to collapse
Can you please check if this works
File
XDA forum

JA sunny said:
Can you please check if this works
File
XDA forum
Click to expand...
Click to collapse
What does it do?

Reyproject said:
What does it do?
Click to expand...
Click to collapse
removes the black bar on the notch/punchhole side that you see on some apps and games when the phone is in landscape. I'll root my phone if this works.

issues flashing combination rom

hello fellas , i have s10 ,problem : always booting up to recovery mode ( couldn`t find solution for it )
,,,, oem is locked and there is no way i can flash twrp or custom rom off course ( btw i am noob)
i tried flashing combination rom using odin ( just to enable usb debugging ) but many msesages of (please get the approval ) for pit ,bootloader, system ...etc
googled the issue , found someone saying it is sort of protection that requires unique key should be requested from samsung
So , how can in bypass it to make successful combination rom flashing ?
any extra files needed plus to the combination rom and pit file ?
please help me out
note : repeat: my phone is oem locked , at flashing stock rom is success but reboots directly to recovery mode ...this is my major problem ,
if anyone can post me sm-g973f (bit15) adb enabler file ?????
it might help
if you guys can hand me in either of those it will be deeply appreciated
thank you all

giants....does combination flashing successful with test points ? and where can i find them inside s10 ?

Hello Rossen, since you have no experience in this area, I know a lot of things that I took the simplest for my S10 exons SM-G973 F. Installation. John WU the official firmware with magisk modify AP official firmware that you transfer to your S10, then once do you transfer magisk patches with Adb to your PC with Adb pull.
Then with Odin you flash the following 4 files BL-AP magisk patched-Cp-Home CSC you let start, you open magisk active Zygisk restarted if rooted...
I forgot TRWP even if I managed once to install it with magisk then bugs and loss of rooting following updating magisk, normally to install TRWP you must already be rooted with magisk then install TRWP either by modify TRWP image with magisk or by the managed TRWP application you directly flash the TRWP image of the application.
https://topjohnwu.github.io/Magisk/install.html

meric57 said:
Hello Rossen, since you have no experience in this area, I know a lot of things that I took the simplest for my S10 exons SM-G973 F. Installation. John WU the official firmware with magisk modify AP official firmware that you transfer to your S10, then once do you transfer magisk patches with Adb to your PC with Adb pull.
Then with Odin you flash the following 4 files BL-AP magisk patched-Cp-Home CSC you let start, you open magisk active Zygisk restarted if rooted...
I forgot TRWP even if I managed once to install it with magisk then bugs and loss of rooting following updating magisk, normally to install TRWP you must already be rooted with magisk then install TRWP either by modify TRWP image with magisk or by the managed TRWP application you directly flash the TRWP image of the application.
https://topjohnwu.github.io/Magisk/install.html
Click to expand...
Click to collapse
thanks for reply , sadly the device can take only the stock rom , any custom will be rejected due to oem lock , and if i flashed stock one it will boot up to recovery not the system ,

So you haven't done the unlocking of oem well you can't do anything, the best thing to do is redo these cleanly you reflash the official rom then you unlock your S10 you press power plus bixby and you connect to the pc, then you press and hold volume up and unlocking is done.
Then you will restart as at the first start you install magisk, activate developer mode about the phone press on low version 7 times then in developer you activate USB debugging.
And you do as I explained.

meric57 said:
So you haven't done the unlocking of oem well you can't do anything, the best thing to do is redo these cleanly you reflash the official rom then you unlock your S10 you press power plus bixby and you connect to the pc, then you press and hold volume up and unlocking is done.
Then you will restart as at the first start you install magisk, activate developer mode about the phone press on low version 7 times then in developer you activate USB debugging.
And you do as I explained.
Click to expand...
Click to collapse
already said when i flash stock rom device turns up to recovery mode not to the system . the only thing i see is flashing combinations which is now impossible without token , is there a trick or workaround to bypass getting in the recovery mode after flashing stock ?

put device in download mode start from scratch with odin official firmware

meric57 said:
put device in download mode start from scratch with odin official firmware
Click to expand...
Click to collapse
like i said before , successful flashing stock rom , after that the mobile goes to recovery mode not to the system

Hello Rose, I had the concern like you these for its that it is necessary to start from zero. I also did like you too when I start with power back TRWP direct, I had to reinstall official rom Android 12, use which TRWP for your S10 exynos the one the twrp-3.6.2_9-2-beyond1lte.img yes or no you know that you have to patch its image with magisk 25.2 then rename it in recovery and replace the one in AP with the recovery modify then flash with odin.
In your quote start with TRWP then you take the boot.img of the AP flashed it then try to restart in recovery.
watch this video

i dont have active android in my device and it can NOT boot up to system if i flashed stock
before stupidly activate oem lock i had zero problems , locked oem and flashed stock and then i got recovery interface , can not log in system

i have LG 4k tv which i messed its software , but managed to reset it all by shorting pins >>> can it be done the same way with my s10 ? if yes , anyone can show me where circuit shorting pins are ?

not at all the only thing to do if you manage to boot trwp recovery in boot do boot download and flash the official rom with csc and not home

meric57 said:
not at all the only thing to do if you manage to boot trwp recovery in boot do boot download and flash the official rom with csc and not home
Click to expand...
Click to collapse
not working ,,,, any instructions or updates to flash factory binary without fail via odin ?

googled to download sboot to fix the whole thing , no luck , can anyone attach it here please ? bit15 (uf protection)

Hello Roseen, so how does your S10 react starting on TRWP or getting stuck on the Samsung logo. I don't see that you tried to do things without having looked at the tutorials on XDA. well a 4G exynos G973F you have the Android 12 UI 4.1 rom.
Does your pc recognize the S10 when it starts up, did you get the message in red safety e and the yellow triangle plus the message, at worst try with another smartphone to film the start-up.
What does your last post mean with bit15.
I put you the link for the tutorial s 10 of the forum
Tutorial : Root Galaxy S10 Series Android 12 One UI 4.1 Stock Firmware
Root Samsung Galaxy S10 Series Android 12, WITHOUT Ramdisk Root Samsung S10+ - S10 - S10e SM-G97xxx, Stock Rom Android 12 - UI 4.1 Latest Version (I tested G970FXXSGHWC2) (Without combination keys for active Magisk after normal restart –...
forum.xda-developers.com