hi guys this is my first post on this forum although i have been browsing around for a few months. my problem is that whenever i connect my phone to my pc and mount it, the computer recognises it but whenever i try to add files to the SD card or format it, the phone disconnects and i have to mount it again. once i have mounted it, the whole process starts all over again and now im stuck in a position where i cant do anything with it.
has anyone had his problem before and is there a way to fix it or is my SD card faulty? thanks in advance.
Are you rooted? If so, what rom are you on? Just give us some specs on what you got.
no im not rooted, im on the oem android software. i was just about to format my SD card so i could start rooting it.
Is it the factory sd card? Do you got another card to try out? If not, try to format the card in the phone and then try it again to see if it still does the same thing.
yeah its a factory SD Card. itried formating it from the phone and now i can add files to the card but it still disconnects whenever i try to format it. is the card protected or something?
djosiah said:
yeah its a factory SD Card. itried formating it from the phone and now i can add files to the card but it still disconnects whenever i try to format it. is the card protected or something?
Click to expand...
Click to collapse
You cannot format it through the USB by mounting it
ok how do i do it then? should i just use a card reader? or is there another way to do it by using the phone? also thought i would add that it has started doing it when adding files to the card again.
djosiah said:
ok how do i do it then? should i just use a card reader? or is there another way to do it by using the phone? also thought i would add that it has started doing it when adding files to the card again.
Click to expand...
Click to collapse
You can put it in a card reader if you have one. I would boot into ubuntu and do it that way, also if you are in ubuntu you can do it through your phone.
djosiah said:
ok how do i do it then? should i just use a card reader? or is there another way to do it by using the phone? also thought i would add that it has started doing it when adding files to the card again.
Click to expand...
Click to collapse
The phone has an option too. Go to
Settings > SD and storage > Format Card
Since your stock G1, the other phone partitioning/formatting isnt available
ok thanks guys i formatted the SD crad uising the options on the phone, which now leaves me to my next problem. i have download the Rc7 file and placed it on he root of the card but i when i power on the phone holding down the camera phone it doesnt show the grey screen with the flashing options, it jus shows the screen which tells me the board type etc. am i doing something wrong? sorry for all the questions.
djosiah said:
ok thanks guys i formatted the SD crad uising the options on the phone, which now leaves me to my next problem. i have download the Rc7 file and placed it on he root of the card but i when i power on the phone holding down the camera phone it doesnt show the grey screen with the flashing options, it jus shows the screen which tells me the board type etc. am i doing something wrong? sorry for all the questions.
Click to expand...
Click to collapse
it doesnt have flashing options
press the power button (not hold, just press) and it should say that its flashing the image.
(look in the center of the screen, there should be a line of text that says something)
DO NOT TURN OFF YOUR PHONE TILL ITS DONE FLASHING
Btw just chiming in case it comes up as it did in the past. If you use Swapper app and have a swapfile image located in the fat32 area, it would cause DC issues or not connect right, back then it never hit me that the swapfile was being torn away from a system that was looking for it, which then gave me corrupt sd errors. (Granted it wasnt) but yea, just another thing to look out for to those using a image file still for swap.
Also how did your flashing go?
Hi all,
I have a problem with my G1, running on latest Cyanogen mod. After restarting the card cannot be read and it is seems to be checking the sd card, if it really happens I dunno. What is weird is that I can access the card from recovery mode (shell), and it is not damaged (at least the windows doesn't detect damage while it is in the card reader. So that implies that the problem might be in the Android system.. anybody has a clue how to solve this? Thanks a lot.
Edit: solved it, deleted fsck_msdos from bin and it works flawlessly again
Can always wipe and reflash. Or if you have another sd card laying around and put that in to see if it recognizes it.
I'm having the same problem How did you delete the fsck_msdos from the bin?
theinstagator said:
I'm having the same problem How did you delete the fsck_msdos from the bin?
Click to expand...
Click to collapse
your phone should rooted
then download and install root explorer
in the root explorer go to
system /bin
and delete fsck_msdos
now reboot your phone
I was having this same issue..it would typically take up to 5 minutes or more to "check for errors" after a boot.
To fix this I backed up my sdcard, reformatted, copied everything back, then reflashed. Everything was fine after that.
i have somewhat the same problem but in my case it sometimes say blank sdcard or damged sd card it read fine when plugged into an sd card reader any help
Thanks. It worked by simply deleting fsck-msdos but it keeps giving SwiftKey3 error " unable to load language packs". Keyboard still OK. I have xperia x10 mini rooted running android 2.1 E10i.
hmaxos said:
Thanks. It worked by simply deleting fsck-msdos but it keeps giving SwiftKey3 error " unable to load language packs". Keyboard still OK. I have xperia x10 mini rooted running android 2.1 E10i.
Click to expand...
Click to collapse
Well, after getting other errors such as "no enough space" from Platinum Backup (there was a space on SD Card), I had to go to Format the SD after copying everything. Then I copied back the important folder the SD. I also had to reinstall SwiftKey. Now everything is fine and no data loss.
SD card Checking for errors
sajjji said:
your phone should rooted
then download and install root explorer
in the root explorer go to
system /bin
and delete fsck_msdos
now reboot your phone
Click to expand...
Click to collapse
Well I will try to backup and format it.... If it works then good if not then I will have to root my LG P880 .
My Problem is "preparing external sd card checking for errors" now that error is not showing while following above steps but now when i click my memory card that is not opening and after opened my memory card my internal device memory also not opening .
baka.yarou said:
Hi all,
I have a problem with my G1, running on latest Cyanogen mod. After restarting the card cannot be read and it is seems to be checking the sd card, if it really happens I dunno. What is weird is that I can access the card from recovery mode (shell), and it is not damaged (at least the windows doesn't detect damage while it is in the card reader. So that implies that the problem might be in the Android system.. anybody has a clue how to solve this? Thanks a lot.
Edit: solved it, deleted fsck_msdos from bin and it works flawlessly again
Click to expand...
Click to collapse
Simple fix, Difficult decision. Remove SD Card from slot then Factory reset phone. Once it comes too just go through all steps to setting up device then reinsert the SD Card into the slot. BOOM!
thank you very very much it worked for me
baka.yarou said:
Hi all,
I have a problem with my G1, running on latest Cyanogen mod. After restarting the card cannot be read and it is seems to be checking the sd card, if it really happens I dunno. What is weird is that I can access the card from recovery mode (shell), and it is not damaged (at least the windows doesn't detect damage while it is in the card reader. So that implies that the problem might be in the Android system.. anybody has a clue how to solve this? Thanks a lot.
Edit: solved it, deleted fsck_msdos from bin and it works flawlessly again
Click to expand...
Click to collapse
thank you so much but it is read only please help
yeah...
supremeteam256 said:
Can always wipe and reflash. Or if you have another sd card laying around and put that in to see if it recognizes it.
Click to expand...
Click to collapse
i am having same issue i always changes roms please can you halp me..
still not working mine is lenovo K3 Note And my Phone is rooted. It is showing Preparing SD card checking for errors
Didn't work for me.
Hard reset don't work.
Delete the fsck.msdos but don't work.
The fsck.msdos file comes on every wipe back.
I think this is a cm issue.
On stock no problems with my external sd card on my HTC One M8.
I'm going crazy...
No need to go to bin.. just put ur SD card in other mobile.. it will show fcsk files when u open the SD card.. just delete those files. Then remove the SD card and put it back in Ur mobile.. Then restart it mobile.. problem solved..,,,
Anitha Sivakumar said:
No need to go to bin.. just put ur SD card in other mobile.. it will show fcsk files when u open the SD card.. just delete those files. Then remove the SD card and put it back in Ur mobile.. Then restart it mobile.. problem solved..,,,
Click to expand...
Click to collapse
ive deleted the fcsk file on bin
the notif "preparing sd card" was gone but another problem occured, i cant even open my storage, ext sd card and even internal card ive tried your solution, ive put my sd card on another device, i cant find any fcsk files that you mention i cant even delete any file from my card using another mobile :crying::crying::crying:
It worked.... Thanks bro..
:good:
sajjji said:
your phone should rooted
then download and install root explorer
in the root explorer go to
system /bin
and delete fsck_msdos
now reboot your phone
Click to expand...
Click to collapse
sajjji said:
your phone should rooted
then download and install root explorer
in the root explorer go to
system /bin
and delete fsck_msdos
now reboot your phone
Click to expand...
Click to collapse
Bloody Brilliant. I have no idea why I could not find this solution two years ago. I have spent several hours searching for this solution, several times. In my case, I needed to remove the fsck.exfat file in the /system/bin folder.
My attention span is extremely short. I have been living with a 3 to 4-minute card scan for a 256GB microSD in my Samsung Note 3 for two and a half years. For all of the reboots I have done (which must be near a thousand, if that's not severely underestimated) I have had to deal with waiting to use my phone. I can't tell you how discouraging it has been to have such a powerful, useful device crippled by such a stupid flaw: that of checking the SD card that you rarely remove, for errors, every single time the phone is rebooted, even after graceful reboots called by the "proper" methods.
I can't tell you how many times I have rebooted my phone, only to forget the reason I rebooted it, because my phone took 4 minutes to reboot.
Productivity to the cubed-root.​Pisses me off.
Someone who has more voice than me please get the Android People to change this. As of Nougat, this is still the default behavior. How can an organization be so stupid...? I have no doubt that just this flaw has sent many people to the Apple camps. Who the cuff in their right mind would want to deal with such a hassle?? Are they seriously unaware of the trend for people to actually believe that their devices, machines and technology ought to be doing things faster than previous generations?
(Please just take the following cynicism with a grain of salt. I just learned the above fix, something I really should have figured out a long time ago/kicking myself!!) :crying:
For the anally-inverted who might bring up the obvious argument that your phone will no longer be able to detect or fix corruption, all that needs to be done is the following:
1) move the fsck.exfat (or whatever the formatting) file to a different folder. In my case I moved it to the /data folder
2) use some delay scripting program that will symlink the fsck.exfat file to a tmpfs location say, 30 seconds after boot; or longer if needed. This intermediary step is necessary in order to create a temporary symlink, which will be nonexistent upon reboot.. If we didn't create a temporary symlink, the fsck.exfat command would be immediately available after each reboot (which we don't want) because symlinks are normally permanent. Therefore, this step will need to be run after every reboot (but again, time-delayed).
3) the last command is to create another symlink, linking the tmpfs fsck.exfat symlink created in the last step back to the /system/bin folder (or wherever it originally resided). So this is a symlink of another symlink. This step actually should only need to be done once, since this symlink should remain after reboot, even though it is initially broken upon reboot until the previous command recreates the intermediary symlink. It should become effective again when the previous step is run by the time-delayed scripting program.
Now your phone has the ability to check the card upon you calling the fsck.exfat routine through normal means, one of which can just be a simple unmount -> mount request from the Android system settings . Your card won't be needlessly fsck-checked to death every bloody time you reboot your phone.
(If you found this tutorial helpful and desire to quote or improve upon it, please cite/credit me for the inspiration! It came through much effort and learning!)
Hi guys. I have a very large problem here.. About few days ago, I was transfering files from my pc to my phone via usb, suddenly the sd card got crashed(maybe) because i was not able to find it on my phone. but everything was fine in pc. then I formatted the sd card in fat32 and tried to hard reset the phone via cwm.. I went to 'wipe/factory data' . after formatting the system, it said unable to mount sd card\android secure- skipping formatting. Now the phone is not starting and i cant flash new rom via cwm because it says unable to mount sd card.. I am extreamly tensed. help me guys.
champ3767 said:
Hi guys. I have a very large problem here.. About few days ago, I was transfering files from my pc to my phone via usb, suddenly the sd card got crashed(maybe) because i was not able to find it on my phone. but everything was fine in pc. then I formatted the sd card in fat32 and tried to hard reset the phone via cwm.. I went to 'wipe/factory data' . after formatting the system, it said unable to mount sd card\android secure- skipping formatting. Now the phone is not starting and i cant flash new rom via cwm because it says unable to mount sd card.. I am extreamly tensed. help me guys.
Click to expand...
Click to collapse
Get a new SD card and format it with your PC and then mount it is your phone.
tried
tpbklake said:
Get a new SD card and format it with your PC and then mount it is your phone.
Click to expand...
Click to collapse
I tried almost 7 sd cards which were working on other HTC phones.
champ3767 said:
I tried almost 7 sd cards which were working on other HTC phones.
Click to expand...
Click to collapse
Not sure how much it may help but did you try putting your sdcard in some other HTC phone? If the phone recognizes it then can you format it through the phone and try again?
Also I am assuming that you were able to flash a different ROM earlier using the same recovery, i.e, you are using the correct version of the recovery; also that your card was not encrypted
no luck
srv.abhishek said:
Not sure how much it may help but did you try putting your sdcard in some other HTC phone? If the phone recognizes it then can you format it through the phone and try again?
Also I am assuming that you were able to flash a different ROM earlier using the same recovery, i.e, you are using the correct version of the recovery; also that your card was not encrypted
Click to expand...
Click to collapse
I tried sd card on other phones without any problem. I inserted atleast 7 sdcard but no luck
try flash your cwm to latest touch recovery , and mount your sd card.. flash cwm via adb.. there a tool somewhere in this forum..
Sent from my HTC Incredible S using xda app-developers app
about ruu
tpbklake said:
Get a new SD card and format it with your PC and then mount it is your phone.
Click to expand...
Click to collapse
can i flash this ruu with a different radio?
champ3767 said:
can i flash this ruu with a different radio?
Click to expand...
Click to collapse
i think i can help you!!
are you able to get into bootloader??
what HBOOT are you on??
also tell me the version!!
version
prunzzz said:
i think i can help you!!
are you able to get into bootloader??
what HBOOT are you on??
also tell me the version!!
Click to expand...
Click to collapse
My hboot version is 2.00.0002
champ3767 said:
My hboot version is 2.00.0002
Click to expand...
Click to collapse
since you are sOFF i dont think you can run RUU
so now do this,
1.open the RUU on PC (dont need to connect phone).Dont close the RUU window.
2.now on PC in Search, type %temp%
open the location
3.now there using search in that folder, search rom.zip
copy this .zip to c:/android
4.rename it to PG32IMG
5.nw put this PG32IMG.zip on phone
6.get int bootloader
7.it should automatically detect and flash it
so now you have a rom that can boot
hope it works
hit thanks if i helped you
and obviously do it aat yur own screen
response
prunzzz said:
since you are sOFF i dont think you can run RUU
so now do this,
1.open the RUU on PC (dont need to connect phone).Dont close the RUU window.
2.now on PC in Search, type %temp%
open the location
3.now there using search in that folder, search rom.zip
copy this .zip to c:/android
4.rename it to PG32IMG
5.nw put this PG32IMG.zip on phone
6.get int bootloader
7.it should automatically detect and flash it
so now you have a rom that can boot
hope it works
hit thanks if i helped you
and obviously do it aat yur own screen
Click to expand...
Click to collapse
I can run ruu but I doesnot fix my as card problem
my sd card is visible and also readable on my phone also after i connected it to my pc but the problem is i cannot format it. i did tried format it and on pc, the process work but after i disconnected from pc, i check using file explorer nothing happend still like unformatted (all file and folder still exist). do not why, maybe somebody can help me to solve this. oh ya...i cannot delete the file too using phone and pc,
sundaeproject said:
my sd card is visible and also readable on my phone also after i connected it to my pc but the problem is i cannot format it. i did tried format it and on pc, the process work but after i disconnected from pc, i check using file explorer nothing happend still like unformatted (all file and folder still exist). do not why, maybe somebody can help me to solve this. oh ya...i cannot delete the file too using phone and pc,
Click to expand...
Click to collapse
have you tried formating it from phone menu? If that doesn't work try with this tool
XDRdaniel said:
have you tried formating it from phone menu? If that doesn't work try with this tool
Click to expand...
Click to collapse
i have downloaded and installed it but on my win7 showed message need permission denied, the administrartor rights are required to run this tool. i tried also formatting from phone but still nothing change
sundaeproject said:
i have downloaded and installed it but on my win7 showed message need permission denied, the administrartor rights are required to run this tool. i tried also formatting from phone but still nothing change
Click to expand...
Click to collapse
this same bullsht happens to me too, the best thing to do is to flash stock rom and format sd it easily does it :angel:
DeathMetal King said:
this same bullsht happens to me too, the best thing to do is to flash stock rom and format sd it easily does it :angel:
Click to expand...
Click to collapse
yeah i have the same thought with u, now im using stock xxkpk and i try erase sd card form setting->sd card and phone storage but the result is still the same nothing change. all my files still safe and installable on my sdcard. make me confused
Is there any little switch on your card where u can set either read only or r+w ?
Dear community,
About a year after i really wanted to root my htc one mini 2, i decided I wanted to factory reset my phone.
So after this year I forgot everything i knew, and managed to wipe the whole OS...
I would really appreciate any hints that might help me to fix my phone again.
Info on where i'm standing with the problem:
1. I tried to find my stock ROM on this site and couldn't because under "firmware" i can only find 2.18.161.2, though mine is 2.18.166.1 - does this matter? It's the vodafone one, and they even have a nandroid backup for my version, but not the stock firmware.
2. I have TWRP installed, and the site tells me i need to have my bootloader locked to flash stock roms. I have no problem relocking or unlocking it, but in the relocked state, i can not access TWRP recovery and use the sideload feature to flash the rom. The phone always goes back to the bootloader screen and the title says " **security warning** ".
3. i would really like to get my phone back as close to it's stock state as possible.
I am kind of afraid of flashing the available stock firmware, as I don't know how to proceed from there without TWRP.
I read a lot about this topic, but i'm kind of loosing it right now...
Can some kind soul lend me their wisdom and help me out?
Would be much appreciated
mfG Montor
Hi,
You can either get put back everything to stock, as in flash stock recovery, relock the bootloader, get the available version from their site but the version number should be higher than the one already installed, however with S-Off you can flash any version.
Or
Leave everything as it is and perform a Nandroid restore.
What file are you getting from the website, is it RUU file, ROM, is it exe or zip ?, RUU will be beneficial to put back to complete stock with proper conditions met ?
WITH CUSTOM RECOVERY YOU CANNOT FLASH STOCK ROM.
TryllZ said:
Hi,
You can either get put back everything to stock, as in flash stock recovery, relock the bootloader, get the available version from their site but the version number should be higher than the one already installed, however with S-Off you can flash any version.
Or
Leave everything as it is and perform a Nandroid restore.
What file are you getting from the website, is it RUU file, ROM, is it exe or zip ?, RUU will be beneficial to put back to complete stock with proper conditions met ?
WITH CUSTOM RECOVERY YOU CANNOT FLASH STOCK ROM.
Click to expand...
Click to collapse
I would actually really like to put everything back to stock, because the reason for the root is somewhat gone now.
As already mentioned, I sadly can not find the stock recovery that i need.
I need the Vodafone x.xx.166.x format, and the closest i get would be the Vodafone x.xx.161.x format of the stock recovery.
What happens if i try to flash the available one? Do I brick my phone once again, or does it say something like "recovery version not matching device version" ?
Also, if by any chance the flash is successfull and the stock recovery x.xx.161.x is on my phone, how can i flash the stock firmware without TWRP?
Though I really like the idea of a more or less complete stock phone, I could totally go with the nandroid backup too.
The problem is, I already downloaded the files but as my OS is gone and i didn't turn on usb-debugging, i can not move a single file onto my device. (I assume that's the issue, because my adb push file /sdcard/TWRP/Backups didn't quite work...
Edit: Because you asked, I don't actually know what would be the best solution right now, but the only file fitting my device version is the nandroid backup, but there are RUUs for x.xx.161.x - which, as already mentioned, is the closest i can get to x.xx.166.x
Montor said:
I would actually really like to put everything back to stock, because the reason for the root is somewhat gone now.
As already mentioned, I sadly can not find the stock recovery that i need.
I need the Vodafone x.xx.166.x format, and the closest i get would be the Vodafone x.xx.161.x format of the stock recovery.
What happens if i try to flash the available one? Do I brick my phone once again, or does it say something like "recovery version not matching device version" ?
Also, if by any chance the flash is successfull and the stock recovery x.xx.161.x is on my phone, how can i flash the stock firmware without TWRP?
Though I really like the idea of a more or less complete stock phone, I could totally go with the nandroid backup too.
The problem is, I already downloaded the files but as my OS is gone and i didn't turn on usb-debugging, i can not move a single file onto my device. (I assume that's the issue, because my adb push file /sdcard/TWRP/Backups didn't quite work...
Edit: Because you asked, I don't actually know what would be the best solution right now, but the only file fitting my device version is the nandroid backup, but there are RUUs for x.xx.161.x - which, as already mentioned, is the closest i can get to x.xx.166.x
Click to expand...
Click to collapse
Here's how you can do it without developer option enabled.
- Make sure device is 100% charged, if you don't know how much charge exists, leave the device on charge for about 1-2 hours.
- Find an MMC of 4GB (Hoping your MMC slot is working)
- You will need Serial Number of your device for Nandroid restore, you can get it from the device box with IMEI stickers.
For RUU (zip file)
- Download the available RUU and rename it to 0P8BIMG.zip (I'm assuming its the same a normal HTC One Mini 2)
- Copy the file into the root of the MMC
- Insert MMC into device
- Boot up device and enter boot loader
- As the device enters bootloader it will automatically start flashing, if all conditions are met.
NB: I frankly can't remember if this will work with TWRP installed.
For Nandroid restore.
- THIS STEP NEEDS BE DONE FROM A PC, Extract all files from the Nandroid restore zip, connect the MMC to the PC.
- In the root folder of the MMC create a TWRP folder and inside it create a folder named BACKUPS and inside this create a folder named YOUR DEVICE SERIAL NUMBER (I haven't tested it with a different named folder so I don't know) inside this folder create a folder with the OS version number of your device and inside this folder place all extracted files.
- Put the MMC into the device.
- Enter TWRP and choose restore
- Locate the folder created in the earlier step, the TWRP Backup folder with files extracted in it.
- Let TWRP restore.
- As far as my knowledge goes it should work fine.
I will advise that you do a restore from Nandroid, because you have TWRP working this is the easiest method, to get the phone up and running then you can decide to go for RUU by enabling developer options and more.
I'm using a Nnadroid restore more than 6 months now, no problem whatsoever.
Good Luck
TryllZ said:
Here's how you can do it without developer option enabled.
- Make sure device is 100% charged, if you don't know how much charge exists, leave the device on charge for about 1-2 hours.
- Find an MMC of 4GB (Hoping your MMC slot is working)
- You will need Serial Number of your device for Nandroid restore, you can get it from the device box with IMEI stickers.
For Nandroid restore.
- THIS STEP NEEDS BE DONE FROM A PC, Extract all files from the Nandroid restore zip, connect the MMC to the PC.
- In the root folder of the MMC create a TWRP folder and inside it create a folder named BACKUPS and inside this create a folder named YOUR DEVICE SERIAL NUMBER (I haven't tested it with a different named folder so I don't know) inside this folder create a folder with the OS version number of your device and inside this folder place all extracted files.
- Put the MMC into the device.
- Enter TWRP and choose restore
- Locate the folder created in the earlier step, the TWRP Backup folder with files extracted in it.
- Let TWRP restore.
- As far as my knowledge goes it should work fine.
I will advise that you do a restore from Nandroid, because you have TWRP working this is the easiest method, to get the phone up and running then you can decide to go for RUU by enabling developer options and more.
I'm using a Nnadroid restore more than 6 months now, no problem whatsoever.
Good Luck
Click to expand...
Click to collapse
That is exactly where I'm stuck with my nandroid backup.
I just can't seem to find a way to push the folder with all the files onto my sd-card.
I tried with "adb push \myfolder /sdcard/TWRP/Backups/myphonesnumberthingy", but it gives me "Device not found" error.
The device is connected, and with "fastboot devices" it shows in the list.
Did I miss something important here?
All the drivers are installed, and I shouldn't be able to lock and unlock the bootloader if the device wasn't properly connected right?
Edit: Nevermind, it seems I can't read. I will try to put my sd-card out of my phone and connect it to my pc somehow
Montor said:
That is exactly where I'm stuck with my nandroid backup.
I just can't seem to find a way to push the folder with all the files onto my sd-card.
I tried with "adb push \myfolder /sdcard/TWRP/Backups/myphonesnumberthingy", but it gives me "Device not found" error.
The device is connected, and with "fastboot devices" it shows in the list.
Did I miss something important here?
All the drivers are installed, and I shouldn't be able to lock and unlock the bootloader if the device wasn't properly connected right?
Edit: Nevermind, it seems I can't read. I will try to put my sd-card out of my phone and connect it to my pc somehow
Click to expand...
Click to collapse
Use an MMC reader for working your MMC with a PC.
Your device connecting to your PC in the bootloader does not mean your commands will work, ADB works with device switched on, in bootloader its fastboot and NOT ADB.
TryllZ said:
Use an MMC reader for working your MMC with a PC.
Your device connecting to your PC in the bootloader does not mean your commands will work, ADB works with device switched on, in bootloader its fastboot and NOT ADB.
Click to expand...
Click to collapse
So i have an adapter for connecting the MMC to my PC.
I plug it in, and it shows me THIS.
Inside my recovery, if I use the file manager, I can't seem to access/find a single set of directories that looks like the one above...
Montor said:
So i have an adapter for connecting the MMC to my PC.
I plug it in, and it shows me THIS.
Inside my recovery, if I use the file manager, I can't seem to access/find a single set of directories that looks like the one above...
Click to expand...
Click to collapse
Have you extracted files from the Nandroid Backup zip and placed them into TWRP>Backups>Phone Serial Number>OS Version Number folder
Now, in TWRP choose Restore from the main screen, and locate the folder where your files are placed.
When in Restore, make sure you choose Storage: Micro SDCard at the top below Time, Battery and CPU.
TryllZ said:
Have you extracted files from the Nandroid Backup zip and placed them into TWRP>Backups>Phone Serial Number>OS Version Number folder
Now, in TWRP choose Restore from the main screen, and locate the folder where your files are placed.
When in Restore, make sure you choose Storage: Micro SDCard at the top below Time, Battery and CPU.
Click to expand...
Click to collapse
Yes i did extract the files in the zip, and placed them in TWRP/BACKUPS/serial/osversion.
But there is no way to locate it or access it.
When i open the file manager in TWRP, i see directories like "boot, cache, data, dev, devlog" etc, and also sdcard and external_sd.
External_sd is empty, and opening sdcard gives me only the directory created by my own nandroid backup, with the path /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32.
Edit: Okay now we are getting closer to solving this.
I tried to change TWRP backup from internal storage to micro sdCard - but it shows (0MB) beside it.
Choosing it either way, does nothing. The checkbox internal storage stays checked.
I'm going to restart my phone and see if something changes...
Edit2: Did nothing, unfortunately.
If i remove the card, the box can't be checked.
If i insert it again and tap on it, it stays highlighted for about 4 seconds and then internal storage is still checked :/
Montor said:
Yes i did extract the files in the zip, and placed them in TWRP/BACKUPS/serial/osversion.
But there is no way to locate it or access it.
When i open the file manager in TWRP, i see directories like "boot, cache, data, dev, devlog" etc, and also sdcard and external_sd.
External_sd is empty, and opening sdcard gives me only the directory created by my own nandroid backup, with the path /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32.
Edit: Okay now we are getting closer to solving this.
I tried to change TWRP backup from internal storage to micro sdCard - but it shows (0MB) beside it.
Choosing it either way, does nothing. The checkbox internal storage stays checked.
I'm going to restart my phone and see if something changes...
Edit2: Did nothing, unfortunately.
If i remove the card, the box can't be checked.
If i insert it again and tap on it, it stays highlighted for about 4 seconds and then internal storage is still checked :/
Click to expand...
Click to collapse
Firstly it shouldn't show you 0MB for SDCard, anyway, place the extracted Nandroid files in the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder and then try again, if this folder is accessible then it should work.
MB: YOUR CONSTANT USE OF THE TERM FILE MANAGER IN TWRP IS GIVING ME AN IMPRESSION THAT YOU ARE ACCESSING THE FILE MANAGER IN TWRP WHERE AS YOU HAD TO PRESS THE RESTORE BUTTON FROM THE MAIN SCREEN, THE FILE MANAGER BUTTON IS DIFFERENT ALTOGETHER IN TWRP.
TryllZ said:
Firstly it shouldn't show you 0MB for SDCard, anyway, place the extracted Nandroid files in the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder and then try again, if this folder is accessible then it should work.
MB: YOUR CONSTANT USE OF THE TERM FILE MANAGER IN TWRP IS GIVING ME AN IMPRESSION THAT YOU ARE ACCESSING THE FILE MANAGER IN TWRP WHERE AS YOU HAD TO PRESS THE RESTORE BUTTON FROM THE MAIN SCREEN, THE FILE MANAGER BUTTON IS DIFFERENT ALTOGETHER IN TWRP.
Click to expand...
Click to collapse
Oh it appears I didn't mention this.
The folder i CAN see, is inside the internal storage under "/sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32" - and I can't access the internal storage, i would have pushed the files if that was possible.
No no, I use the backup function to locate my nandroid backup files.
But with the backup function, I couldn't change directories and look for files so I used the file manager to do that.
The file manager doesn't allow me to change to sd card either way, so that doesn't work.
Edit:
The sd-card i have inside my phone right now is 64gb big - is it possible that this is too big to be recognized?
I also have a 32gb one, would that make a difference?
Montor said:
Oh it appears I didn't mention this.
The folder i CAN see, is inside the internal storage under "/sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32" - and I can't access the internal storage, i would have pushed the files if that was possible.
No no, I use the backup function to locate my nandroid backup files.
But with the backup function, I couldn't change directories and look for files so I used the file manager to do that.
The file manager doesn't allow me to change to sd card either way, so that doesn't work.
Edit:
The sd-card i have inside my phone right now is 64gb big - is it possible that this is too big to be recognized?
I also have a 32gb one, would that make a difference?
Click to expand...
Click to collapse
As per spec, this device supports 64GB too but I myself use a 32GB one, so yes you can try that and again you will need to access TWRP restore through the RESTORE button in TWRP main screen and NOT BACKUP button.
What you can do is copy the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder into you SDCard TWRP folder and place the extracted files in this folder and try a restore.
TryllZ said:
As per spec, this device supports 64GB too but I myself use a 32GB one, so yes you can try that and again you will need to access TWRP restore through the RESTORE button in TWRP main screen and NOT BACKUP button.
What you can do is copy the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder into you SDCard TWRP folder and place the extracted files in this folder and try a restore.
Click to expand...
Click to collapse
Okay it seems my 32gb one is broken, it's showing up but not as a mass storage.
Well if I could access the sd card with twrp at all, that would really help me - but I can't.
Backup botton and restore button behave the same when choosing the Micro SDcard (0MB).
And with the file manager, accessing the sd card gives me an empty directory...
Edit: Googling this problem tells me I need to format my card, as TWRP doesn't recognize it.
I read FAT32 somewhere, I read exFAT somewhere, what format does TWRP work with?
Montor said:
Okay it seems my 32gb one is broken, it's showing up but not as a mass storage.
Well if I could access the sd card with twrp at all, that would really help me - but I can't.
Backup botton and restore button behave the same when choosing the Micro SDcard (0MB).
And with the file manager, accessing the sd card gives me an empty directory...
Edit: Googling this problem tells me I need to format my card, as TWRP doesn't recognize it.
I read FAT32 somewhere, I read exFAT somewhere, what format does TWRP work with?
Click to expand...
Click to collapse
First can I know if you can see any file/folder in SD when accessing it through Restore in TWRP ?
Format it as exFat, hopefully it should work..
You mentioned its not showing as Mass Storage, what is it showing up as ?
TryllZ said:
First can I know if you can see any file/folder in SD when accessing it through Restore in TWRP ?
Format it as exFat, hopefully it should work..
Click to expand...
Click to collapse
First, through restore I can't navigate to other folders at all.
All I can do there, is tapping on Internal storage and choosing micro SDcard - which doesn't work.
It's like TWRP knows there is a sd card in my phone, but somehow can't access it.
That's why I assume it's due to it's formatting.
Switching folders/directories is only possible with the file manager with the advanced button - but this only shows me two things.
1. External_sd --> shows me an empty directory
2. sdcard --> shows me the folder where TWRP created the backup folder when I did the backup myself. (I assume that's the internal storage because under the restore button, this is the only thing that i shows up)
I read somewhere, that exFAT is only recognized by TWRP if you have a newer version of the recovery installed.
I don't know exactly but the version i'm using is definitely on of the first versions that came out.
Also, I checked my SD-card on my laptop, and apparently it allready is exFAT.
Edit: I was talking about the 32gb card not showing up.
I don't think it really matters, but my description wasn't very accurate.
The SD-card (32gb) is shown as the SD-card like it should, but the PC doesn't show any kind of used/free space bar underneath it.
Also, opening it gives a message like "There is no card connected"
Montor said:
First, through restore I can't navigate to other folders at all.
All I can do there, is tapping on Internal storage and choosing micro SDcard - which doesn't work.
It's like TWRP knows there is a sd card in my phone, but somehow can't access it.
That's why I assume it's due to it's formatting.
Switching folders/directories is only possible with the file manager with the advanced button - but this only shows me two things.
1. External_sd --> shows me an empty directory
2. sdcard --> shows me the folder where TWRP created the backup folder when I did the backup myself. (I assume that's the internal storage because under the restore button, this is the only thing that i shows up)
I read somewhere, that exFAT is only recognized by TWRP if you have a newer version of the recovery installed.
I don't know exactly but the version i'm using is definitely on of the first versions that came out.
Also, I checked my SD-card on my laptop, and apparently it allready is exFAT.
Edit: I was talking about the 32gb card not showing up.
I don't think it really matters, but my description wasn't very accurate.
The SD-card (32gb) is shown as the SD-card like it should, but the PC doesn't show any kind of used/free space bar underneath it.
Also, opening it gives a message like "There is no card connected"
Click to expand...
Click to collapse
The SDCard not showing free space bars is windows could possibly mean SDCard error.
FAT, FAT32 and exFAT work for Android so yes if you format it in any of these it ought to work. exFAT format is most commonly used in mobile devices in terms of SDCard.
Card disconnecting in Windows, I am guessing your card is having I/O issues, what this means is that if you try and format it and the MMC disconnects during the format process there is a chance it will be permanently damaged.
What you can do is just use Quick Format, this will not check for any errors, however if there is any sector errors in the MMC, flasing through TWRP could cause unexpected problems if that sector is accessed.
Advisably get a working 4GB SDcard to avoid any hiccups.
TryllZ said:
The SDCard not showing free space bars is windows could possibly mean SDCard error.
FAT, FAT32 and exFAT work for Android so yes if you format it in any of these it ought to work. exFAT format is most commonly used in mobile devices in terms of SDCard.
Card disconnecting in Windows, I am guessing your card is having I/O issues, what this means is that if you try and format it and the MMC disconnects during the format process there is a chance it will be permanently damaged.
What you can do is just use Quick Format, this will not check for any errors, however if there is any sector errors in the MMC, flasing through TWRP could cause unexpected problems if that sector is accessed.
Advisably get a working 4GB SDcard to avoid any hiccups.
Click to expand...
Click to collapse
I have the 64gb one i was always using, and the not working 32gb one.
Both are exFat.
I just wanted to know if it might work formatting the 64gb one
Edit: Concerning formatting, this is the thread I was referring to.
Montor said:
I have the 64gb one i was always using, and the not working 32gb one.
Both are exFat.
I just wanted to know if it might work formatting the 64gb one
Edit: Concerning formatting, this is the thread I was referring to.
Click to expand...
Click to collapse
The device supports 64GB and so does TWRP, now concerning your SDCard, yes it would work (as long as its hardware-error free)..
I'm using TWRP version 2.8.5.0 and my SDCard is exFAT and works fine with TWRP..could be that older versions of TWRP might not support exFAT but I personally can't confirm that as which is the older version that you are using.
TryllZ said:
The device supports 64GB and so does TWRP, now concerning your SDCard, yes it would work (as long as its hardware-error free)..
I'm using TWRP version 2.8.5.0 and my SDCard is exFAT and works fine with TWRP..could be that older versions of TWRP might not support exFAT but I personally can't confirm that as which is the older version that you are using.
Click to expand...
Click to collapse
Update!
I realized, it's probably really the 64gb sd card, that's the issue here.
I took the 4gb one out of my fathers phone - bam.
TWRP recognized it immediately and restore is in progress!!!
Will keep updating!
Edit: IT F*ING WORKED!
Thank you SO much for your help!!!
Is there any way I can give you somethign in return?
Montor said:
Update!
I realized, it's probably really the 64gb sd card, that's the issue here.
I took the 4gb one out of my fathers phone - bam.
TWRP recognized it immediately and restore is in progress!!!
Will keep updating!
Edit: IT F*ING WORKED!
Thank you SO much for your help!!!
Is there any way I can give you somethign in return?
Click to expand...
Click to collapse
Great...:good::good::good:
Frankly I never imagined it could be the 64GB, I was purely under the assumption TWRP would accept 64GB MMC, anyway I lacked that information but now I know.
Nope, its working now is more than enough for me.