Related
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
I think there is not solution for this problem. We have to wait. (I have the same problem but in Al00 running Al19 rom)
How do you check for FRP lock on a Huawei phone just curious.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
kyle_2103 said:
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
Click to expand...
Click to collapse
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
ChaseRxx said:
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
Click to expand...
Click to collapse
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
I've tried some command in fastboot mode but there's always an error: Remote: command not allowed.
I can't do anything with fastboot mode
1. Try to force update with Power Button + Min Vol Button + Max Vol Button, liked you said this isn't working try to do the button combination with the phone connect it to the PC; in my case some times dload din't works after I connected the phone to the computer.
2. Other thing, something happend if you turn of the phone and leave Max Vol Button pressed, you should be entering to eRecovery.
3. Remember that sometimes enter in eRecovery mode requires to the phone be turn off otherwise you can't access to Recovery. So if this is the case follow bullet #2 and them #1.
PD: OFC I'm assuming you already have the dload folder with an compatible version of stock ROM on your SDCARD. If you don't have any version tries this one: https://forum.xda-developers.com/p9...dload-file-p9-eva-l09-b136-t3382818?nocache=1
Hope I helped you, I already bricked twice my P9 corrupting System Table Partitions.
Jeremy Molina.
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
If you did the change of Unlock OEM before the bricked in an previous authorized computer you will still have rights for, otherwise new Android Security features is going to rejected the request.
Exacly
Dload/ no network
ChaseRxx said:
Exacly
Click to expand...
Click to collapse
Hi guys! Im new sorry if posted in wrong place/topic, I did dload method as here https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818 to debrand my L09 Vodafone to stock software and now I end up in EVA-C900B136 and my sim card/network is not working anymmore I had download the software package is in the above post and did force flash.
Many thanks for help!!!
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
dondrog said:
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
Click to expand...
Click to collapse
fastboot oem unlock (followed by bootloader code)
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello gays i install nougat 7
install with TWRP after install my phone is no keybord no all problems and i can`t active oem waht i do all command
remote not allowed coomand and i try to install all veriosn but still problem please help me
i install
EVA-L19C432B322-update
and my phone 6369C-EVA L19
my mistake please help me
i try to swoftware sim but swoftware failed
--
incompatibility with current version please download the correct update package
i upload vedio on youtube see please https://www.youtube.com/watch?v=V2yH...ature=youtu.be
sry for my bad engilsh
Any help would be greatly appreciated
I have a P9 L09, i have unlocked the bootloader, flashed TWRP recovery, and started flashing some roms. I have succesfully flashed a cyanogenmod, and it booted properly, but when it started it asked me for a password which i did not know, so i google searched and found out that it is a common issue and i need to wipe data from recovery. I tryed that but it did not work it says failed, and nothing works in the wipe advanced section, beside system. And also in the custom recovery it says that the internal storage has 0MB ! I was able to put other custom roms on the SDcard and flash them, they booted but every single one asks for the password.. I then tryed to install stock rom with the dload method, but it crashes and 40% , and i tryied the System Recovery option in HiSuite and it says it is not compatible with my device. Any help would be greatly appreciated! Thank you!
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello. I have the same problem. I have my unlock code but in fastboot, adb command says it failed. Sorry for bad english. What can i do?
FAILED: REMOTE COMMAND NOT ALLOWED FINISHED.
Same problem on my honor &x locked bootloader and bricked. unlocking the oem like you said above does not work
So recently I updated my phone using the Firmware Finder but flashed an NRD90M Test-Keys. Read about it and the only way to fix it is to flash twrp and flash another firmware. Tried to flash twrp but got an 'FAILED (remote: Command not allowed)' error. So that didn't work and I tried to factory reset my phone using the stock recovery but that gets stuck on 7/10% and it then gives me an error. (Just a big red '!' mark and says Failed.)
And after the failed reset the phone doesn't have a keyboard. Only the voice typing from google. So trying to even set up the phone makes it a pain in the ass.
I can get into fastboot but trying to flash anything gives me the (Failed (Remote: Command not allowed) error.
My phone is unlocked. It only says that FRP is Locked.
Can anyone help me with this issue?
Hi everybody, I have a little question regarding my P10.
The model of my phone is VTR-L09C521B101
Is there a way to flash this phone with VTR-L09C432 version?
or i need to flash with same model version (VTR-L09C521)?
Thnks
Yes, it is possible to 'rebrand'. The procedure is explained in the Mate 9 forum. It is not so easy and involves unlocking the bootloader.
Updating can be done with the Firmware Finder (Playstore).
M1chiel said:
Yes, it is possible to 'rebrand'. The procedure is explained in the Mate 9 forum. It is not so easy and involves unlocking the bootloader.
Updating can be done with the Firmware Finder (Playstore).
Click to expand...
Click to collapse
thanks for the answer!!
regarding bootloader, the phone shows this:
PHONE RELOCKED
FRP LOCK
ADB shows me that the phone is unlocked, the problem is when I try to send something to phone it shows:
Error Remote command not allowed.
any ideas?
thanks!
I've tried to reword the mate 9 instructions for the p10 here: https://forum.xda-developers.com/p10/help/rebrand-firmware-finder-t3685951
As for adb, what command are you trying? Do you see your phone if you type ADB Devices?
Quintman said:
I've tried to reword the mate 9 instructions for the p10 here: https://forum.xda-developers.com/p10/help/rebrand-firmware-finder-t3685951
As for adb, what command are you trying? Do you see your phone if you type ADB Devices?
Click to expand...
Click to collapse
Quintman, no the phone is not listed with adb devices command. I can only enter with fastboot.
Let me paste the commands that I have tried:
C:\adb>fastboot devices
WPG7N17320000978 fastboot
C:\adb>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.001s]
finished. total time: 0.001s
C:\adb>fastbot oem lock <my_unlock_code>
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
C:\adb>fastboot oem unlock <my_unlock_code>
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
C:\adb>fastboot oem relock <my_unlock_code>
...
FAILED (remote: stat not match)
finished. total time: 0.016s
The Strange thing is that in the phone shows PHONE RELOCKED, not unlocked as ADB shows.
Since I uploaded boot img of another version (C432) full OTA, could this be the problem? in this case what can I do?
thanks for your help!!
Could this be happening because of FRP Lock?, none of the software I have tried (DC-phoenix, chimera and Unlocker v2) worked. Im this close to throw this f*ckin phone to trash u.u
fmm1977 said:
Could this be happening because of FRP Lock?, none of the software I have tried (DC-phoenix, chimera and Unlocker v2) worked. Im this close to throw this f*ckin phone to trash u.u
Click to expand...
Click to collapse
edit: just found this in another thread "FRP Lock occurs when the phone has a firmware mismatch and or oem unlocking is not on in developer options"
Hmm, i've just checked my phone and in fastboot it says PHONE Locked, and FRP Unlock. I think that may be your issue. What exactly did you do to flash your phone with the other version? put an UPDATE.APP into a \Dload folder and 3 button update?
is your phone booting (guessing not). my guess is that you need to get a hold of your stock firmware file an flash that first.
Quintman said:
edit: just found this in another thread "FRP Lock occurs when the phone has a firmware mismatch and or oem unlocking is not on in developer options"
Hmm, i've just checked my phone and in fastboot it says PHONE Locked, and FRP Unlock. I think that may be your issue. What exactly did you do to flash your phone with the other version? put an UPDATE.APP into a \Dload folder and 3 button update?
is your phone booting (guessing not). my guess is that you need to get a hold of your stock firmware file an flash that first.
Click to expand...
Click to collapse
Ok, this is what I've done step by step:
1.- With the unlock code provided by huawei, I have unlocked my phone (my version is VTR-L09C521B101 stock)
2.- Once unlocked, I have downloaded another ROM version (VTR-L29C605B151) in the web page says this rom is for latin america), so with the Huawei Update Extractor, I have extracted all files.
3.- Via ADB/FASTBOOT, I sent the files to my phone, boot.img first and then the others. (big big mistake!)
4.- Rebooted the phone, and then keeps restarting at huawei logo.
5.- Seeing that it did´t worked, what I did was to lock the phone again thinking to send it to Huawei (at this point the phone shows as "unlocked" via fastboot commands, however when I start the phone in fastboot mode, in the screen shows "PHONE RELOCKED, FRP LOCK"
6.- Sent to huawei's service, they said that they cannot fix my phone because it was tampered/rooted.
7.- Right now all I need to fix my phone is to LOCK/UNLOCK again in order to rebrand it to L29 version, since the original stock rom dont exist (not as FULL OTA).
And that´s what I did so far my friend.
Questions:
1.- Is there a way to connect to my phone and change the oem info file? or something?
2.- Do I need to wait the stock rom to be released in order to reflash via Dload method?
3.- What if the stock ROM version of my phone is never released?
thank you for your answer my friend!!
Hmm ok. I am just not sure on your step 3, I've never heard of a method that involves a boot.img... what I would suggest, is to try and download the stock firmware files (need the larger full ota files), extract the update.app file and put on sd card in \dload.
Then hold down both volume up and down and power (3 button method)
It will try and flash the stock image back to the phone.
I just tried the Dload method and nothing happened (always stuck in 5%), now im going to try to use a smaller memory card (mine is 64 Gb). lood
U have disconnected the USB cable when u try 3 button update
berka38 said:
U have disconnected the USB cable when u try 3 button update
Click to expand...
Click to collapse
Yes sr!!
Hi,
I have a P9 here I'm was asked to repair. I think it is kind of bricked and I hope some one can help me to unbrick it.
According to the auto dc-unlocker identification:
Found Phone : EVA-L09
Firmware : EVA-L09C432B386
FB LockState: LOCKED
USER LockState: LOCKED
So, bootloader locked and FRP locked. I don't know if the Firmware version above is right. All I know is that some Update.app files were flashed to the state of the phone now and before there where bootloops while the start animation and stuck boot with black screen.
At the moment I can do:
- turn on to see only the first huawei log with "powered by android", then nothing happens
- I can not enter eRecovery or update for Update.app
- I can only enter fastboot
I have the unlock code for the bootloader. I can not commit any fastboot commands (oem unlock, flash, etc) all is blocked with:
FAILED (remote: Command not allowed)
The locked FRP should be the reason for this.
I think OEM-unlock and usb debug from developer section was not enabled as the phone was usable. adb commands like "adb reboot bootloader" fail with
error: device '(null)' not found
fastboot devices shows the device
I have tried to uncharge the battery and then try to enter other modes than fastboot. No luck with that.
Do I have any chance to unbrick it without paying for the dc-unlocker/phoenix?
Can I do something with SRKTool?
If I have to use unlocker,
- do I have to unlock the bootloader?
- should I flash the same firmware that is now on the phone (B386) and where can I find it? (found only 1000 other versions until now)
Hope for answers
I've gone through that before, but ended up using DC-Phoenix to unbrick it when it's FRP and bootloader locked. Cost me about $15. There is a post on how to do this but I'll have to search for it again.
Here is the post I used:
https://forum.xda-developers.com/showpost.php?p=71767614&postcount=7
I guess you enter fastboot by Vol- and Power?
Not sure if the following method could help you with, but you can analyze before you go for dc-phoenix:
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
scammander said:
Hi,
I have a P9 here I'm was asked to repair. I think it is kind of bricked and I hope some one can help me to unbrick it.
According to the auto dc-unlocker identification:
Found Phone : EVA-L09
Firmware : EVA-L09C432B386
FB LockState: LOCKED
USER LockState: LOCKED
So, bootloader locked and FRP locked. I don't know if the Firmware version above is right. All I know is that some Update.app files were flashed to the state of the phone now and before there where bootloops while the start animation and stuck boot with black screen.
At the moment I can do:
- turn on to see only the first huawei log with "powered by android", then nothing happens
- I can not enter eRecovery or update for Update.app
- I can only enter fastboot
I have the unlock code for the bootloader. I can not commit any fastboot commands (oem unlock, flash, etc) all is blocked with:
FAILED (remote: Command not allowed)
The locked FRP should be the reason for this.
I think OEM-unlock and usb debug from developer section was not enabled as the phone was usable. adb commands like "adb reboot bootloader" fail with
error: device '(null)' not found
fastboot devices shows the device
I have tried to uncharge the battery and then try to enter other modes than fastboot. No luck with that.
Do I have any chance to unbrick it without paying for the dc-unlocker/phoenix?
Can I do something with SRKTool?
If I have to use unlocker,
- do I have to unlock the bootloader?
- should I flash the same firmware that is now on the phone (B386) and where can I find it? (found only 1000 other versions until now)
Hope for answers
Click to expand...
Click to collapse
So you can not update via dload method? Did you try booting into recovery (not Recovery)? And you can't update with Update.app, you need to flash update.zip and full_update.zip via TWRP or Recovery. What wanted the owner of this phone to do, that he bricked it ?
Thank you all for your answers. Like I tried to describe: I was not able to access any other mode than fastboot.
"was able": I used DC-Phoenix now and it worked just fine.
Little confusing is that in all tutorials, even the on on the DC site, the UI of the tool is different.
But that's now Problem. The current Version is lot easier. Just "Standard Mode", select Update.app (full), Click Update.
The Phone gets flashed with fastboot, DC will restart it to update mode and will flash again. All automatic.
Really easy.
so you paid 15 USD ?
DallasCZ said:
so you paid 15 USD ?
Click to expand...
Click to collapse
Yes I did, and it worked.
ok... i was just browsing the web on my phone then i sat it down for a bit... then, when i came back, it was in bootloader... i tried to start it and it said "Boot Failed: Failed to initialize partition table" so, what can i do to fix it... it is a motorola g6, XT1925-6 and i tried flashing it and it still didnt work... dont have an unlocked bootloader because i cant unlock it because the device is bricked. can someone please help?
DerpyPlayz71 said:
ok... i was just browsing the web on my phone then i sat it down for a bit... then, when i came back, it was in bootloader... i tried to start it and it said "Boot Failed: Failed to initialize partition table" so, what can i do to fix it... it is a motorola g6, XT1925-6 and i tried flashing it and it still didnt work... dont have an unlocked bootloader because i cant unlock it because the device is bricked. can someone please help?
Click to expand...
Click to collapse
If you download the latest stock firmware I believe it ends with -92 you should be able to reflash the stock firmware. I would try just flashing the GPT.bin file per the restore stock instructions, and then attempt to boot. They're official files so they should flash regardless of bootloader status