Good news) - Huawei P10 Lite Guides, News, & Discussion

So, we already have service firmware hw / eu, hw / ru, all / cn. And attention, they are sewed with three buttons !!! You can change the location without doing unnecessary actions
For example - look zip.

rambik33 said:
So, we already have service firmware hw / eu, hw / ru, all / cn. And attention, they are sewed with three buttons !!! You can change the location without doing unnecessary actions
For example - look zip.
Click to expand...
Click to collapse
This is amazing news! This is what we were able to do on the P6, and G7 (possibly other models too), and it is so convenient, and less chance of bricking your device!
Any chance there is a service firmware for hw / meafnaf firmware? :fingers-crossed:

miz_pimp said:
This is amazing news! This is what we were able to do on the P6, and G7 (possibly other models too), and it is so convenient, and less chance of bricking your device!
Any chance there is a service firmware for hw / meafnaf firmware? :fingers-crossed:
Click to expand...
Click to collapse
You understand that it is difficult to receive such information. If possible, we will try.

rambik33 said:
You understand that it is difficult to receive such information. If possible, we will try.
Click to expand...
Click to collapse
Yes, I understand, no pressure though! [emoji28] I'm just happy that there is now an easier way to debrand our devices, especially without unlocking the bootloader. [emoji16][emoji1360]
Sent from my WAS-LX1 using Tapatalk

miz_pimp said:
Yes, I understand, no pressure though! [emoji28] I'm just happy that there is now an easier way to debrand our devices, especially without unlocking the bootloader. [emoji16][emoji1360]
Sent from my WAS-LX1 using Tapatalk
Click to expand...
Click to collapse
unfortunately the bootloader must be unlock. I debrand now hw/ru to all/cn. Without oeminfo all/cn - failed.
Change oeminfo - all is ok, 3 buttons is working.

miz_pimp said:
Any chance there is a service firmware for hw / meafnaf firmware? :fingers-crossed:
Click to expand...
Click to collapse
There is hw/meafnaf :laugh:

rambik33 said:
There is hw/meafnaf [emoji23]
Click to expand...
Click to collapse
My day is made! [emoji23][emoji23][emoji23] Thank you, I'll check it out later! [emoji16][emoji38]
Sent from my WAS-LX1 using Tapatalk

What is this guide? Is this guide for huawei p10 lite that doesnt receive normal OTA software update beacuse of a ROM locked by carrier?

Janez33 said:
What is this guide? Is this guide for huawei p10 lite that doesnt receive normal OTA software update beacuse of a ROM locked by carrier?
Click to expand...
Click to collapse
This is not a guide. The service firmware is a full firmware that is used to unbrick our devices, using the dload method.
This firmware can make it easier to debrand devices, although it is necessary to go through extra steps, like unlocking your bootloader, and installing a custom recovery, etc.
You will need to search the forum for a link to the thread with the service firmwares. [emoji1360]
Sent from my WAS-LX1 using Tapatalk

Related

Will c900 still receive ota updates

Hi
I have updates my UK Vodafone p9 using the b136 file everything went ok but no I have a version c900.
Question is will my phone still receive ota updates?.
New to huawei after spending so long with Samsung devices.
Great phone and a great forum.
Thanks paulo
magicmcfc said:
Hi
I have updates my UK Vodafone p9 using the b136 file everything went ok but no I have a version c900.
Question is will my phone still receive ota updates?.
New to huawei after spending so long with Samsung devices.
Great phone and a great forum.
Thanks paulo
Click to expand...
Click to collapse
Yes you will. In terms of updates C900 and C432 are the same and will receive all updates directly from Huawei.
Personally I would convert the device to C432 fully though as your device will have inconsistent device IDs that need changing. It's simple enough as long as you have unlocked your devices bootloader using DC-Unlocker.
flibblesan said:
Yes you will. In terms of updates C900 and C432 are the same and will receive all updates directly from Huawei.
Personally I would convert the device to C432 fully though as your device will have inconsistent device IDs that need changing. It's simple enough as long as you have unlocked your devices bootloader using DC-Unlocker.
Click to expand...
Click to collapse
Can i convert L19 C182 to C432?
Sent from my EVA-L19 using XDA-Developers mobile app
Mostar088 said:
Can i convert L19 C182 to C432?
Sent from my EVA-L19 using XDA-Developers mobile app
Click to expand...
Click to collapse
Any idea how we can convert ?
Sent from my EVA-L09 using Tapatalk
Hi! Could I know where the firmware (p9 plus) C900B174 is from? Country? Europe no brand, etc.? Many thanks
---------- Post added at 09:50 PM ---------- Previous post was at 09:09 PM ----------
Mostar088 said:
Can i convert L19 C182 to C432?
Sent from my EVA-L19 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi; are you sure that the C900 will regularly receive the updates? Before than a brand one, also? Thanks
magicmcfc said:
Hi
I have updates my UK Vodafone p9 using the b136 file everything went ok but no I have a version c900.
Question is will my phone still receive ota updates?.
New to huawei after spending so long with Samsung devices.
Great phone and a great forum.
Thanks paulo
Click to expand...
Click to collapse
Hi; I'm going to buy a p9 plus with your same ROM, C900; are there any news concerning the ota updates? Is it true that this ROM blocks the updates? Then, passing to C432, do you invalid the warranty? Many thanks
p.s. where is your phone from? An international one, I think
flibblesan said:
Yes you will. In terms of updates C900 and C432 are the same and will receive all updates directly from Huawei.
Personally I would convert the device to C432 fully though as your device will have inconsistent device IDs that need changing. It's simple enough as long as you have unlocked your devices bootloader using DC-Unlocker.
Click to expand...
Click to collapse
so you think that C900 updates will arrive via ota? Or is it necessary to change to C432? Please explain to me!
Xsequence said:
so you think that C900 updates will arrive via ota? Or is it necessary to change to C432? Please explain to me!
Click to expand...
Click to collapse
Hi,
I have Huawei P9-L09 and with build C900B136. i have incorrect icons and theming not working and when i am trying to register fingerprint DONE button on setting PIN is also greyed out
Please help!!!
ZAD000 said:
Hi,
I have Huawei P9-L09 and with build C900B136. i have incorrect icons and theming not working and when i am trying to register fingerprint DONE button on setting PIN is also greyed out
Please help!!!
Click to expand...
Click to collapse
What did u have before upgrade? Did u change oeminfo or something?
Sent from my HUAWEI VIE-L29 using XDA Labs
Mostar088 said:
What did u have before upgrade? Did u change oeminfo or something?
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
No i did nothing, i just bought it 2 days ago as it is and found this problem
ZAD000 said:
No i did nothing, i just bought it 2 days ago as it is and found this problem
Click to expand...
Click to collapse
Need to know what Vendor u have, dail *#*#2846579#*#* in menu choose option 3 and then option 4 and tell me Vendor and Country.
Sent from my HUAWEI VIE-L29 using XDA Labs
Mostar088 said:
Need to know what Vendor u have, dail *#*#2846579#*#* in menu choose option 3 and then option 4 and tell me Vendor and Country.
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Vendor: hw
Country: demo
it is a demo version
ZAD000 said:
Vendor: hw
Country: demo
it is a demo version
Click to expand...
Click to collapse
Someone sold you a demo unit. Where did you buy it?
Sent from my HUAWEI VIE-L29 using XDA Labs
Mostar088 said:
Someone sold you a demo unit. Where did you buy it?
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
I bought it from a local guy on OLX.
After so many try finally i got bootloader unlock code from huawei. will try to unlock after getting home and will flash oeminfo and relock and C432 will report back
Thank you for reply
ZAD000 said:
I bought it from a local guy on OLX.
After so many try finally i got bootloader unlock code from huawei. will try to unlock after getting home and will flash oeminfo and relock and C432 will report back
Thank you for reply
Click to expand...
Click to collapse
To get the icons correct u will have to flash hw and dt folder when u flash C432 firmware. U have it in the SrkTool Huawei.
Sent from my HUAWEI VIE-L29 using XDA Labs
Mostar088 said:
To get the icons correct u will have to flash hw and dt folder when u flash C432 firmware. U have it in the SrkTool Huawei.
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Hi,
i unlocked the bootloader and after flashing oeminfo i flashed C432 with hw and dt and it worked. now its showing County as eu in vendor and country info. everything working fine like icons and themes
thank you for reply
ZAD000 said:
Hi,
i unlocked the bootloader and after flashing oeminfo i flashed C432 with hw and dt and it worked. now its showing County as eu in vendor and country info. everything working fine like icons and themes
thank you for reply
Click to expand...
Click to collapse
Nice to hear :good:
Sent from my HUAWEI VIE-L29 using XDA Labs
Mostar088 said:
Nice to hear :good:
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Hi Mostar, tell me; as I told you, the p9 plus (I'm going to buy it from a friend of mine) has a C55b160 firmware (Italy, Tim brand) and themes are not present...do you think that if my friend flashed the rom with a c432, before selling it to me (without unlocking the bootloader), it would be better, in general? Where to find eventually the c432 firmware? No problem, in this case too, for the warranty? Thanks
Xsequence said:
Hi Mostar, tell me; as I told you, the p9 plus (I'm going to buy it from a friend of mine) has a C55b160 firmware (Italy, Tim brand) and themes are not present...do you think that if my friend flashed the rom with a c432, before selling it to me (without unlocking the bootloader), it would be better? Where to find eventually the c432 firmware? No problem, in this case too, for the warranty? Thanks
Click to expand...
Click to collapse
U can debrand it the same way you debranded your phone with SrkTool Huawei by flashing oeminfo for C432 but u must unlock bootloader and root, always backup your oeminfo before debrand so u can return it to stock for warranty. U can download firmware here:
http://forum.xda-developers.com/p9-plus/development/rom-stock-firmware-c636b130-t3414711/page1
Sent from my HUAWEI VIE-L29 using XDA Labs
I'm having the seemingly common Android Pay issues after receiving my phone back from repair from a Huawei service centre with the C900 build on it. I have requested the bootloader code from Huawei after they refused to help get me onto the 'correct' one so if somebody could tell me what needs to be put onto my phone to get it to C432 that would be much appreciated. I'm not sure what they have put on so would this need to be known before trying to get to 432 or is it not an issue?
I am in the UK and my carrier is EE. Going through to Network Information Query ---> Vendor Country Info shows Vendor as EE and Country as GB. Build number EVA-C900B166.
Not a clue with any of this kind of thing so talk to me as if I'm stupid?!?!?!
Thanks in advance

Looking for Chinese ALOO Original OEMINFO file

As the title says, looking for the original OEMInfo file as I forgot I could back mine up before I tried to trick the device into being an EU model ... (it worked fine mind you - but now won't take any updates)
how did you trick it to being EU model? flashed C432 OEM-file from an EU P9?
Gesendet von meinem SM-G935F mit Tapatalk
raider2k9 said:
how did you trick it to being EU model? flashed C432 OEM-file from an EU P9?
Gesendet von meinem SM-G935F mit Tapatalk
Click to expand...
Click to collapse
yes, using this thread
http://forum.xda-developers.com/p9/development/how-to-change-cust-c900-c432-t3392824
Process is dead easy, however my phone thinks its a L09 not a l19 (dual sim) which is not the end of the world as dual sim still works. BUT the 168 chinese ROM has a more advanced (and easier to use) SIM swop functionality (switching between which SIM has the 3/4G connectivity)
Just wish I could get my hands on the oem-file (orignal)
slug32 said:
As the title says, looking for the original OEMInfo file as I forgot I could back mine up before I tried to trick the device into being an EU model ... (it worked fine mind you - but now won't take any updates)
Click to expand...
Click to collapse
What does tricking the device into being an EU model do?
dikexpz said:
What does tricking the device into being an EU model do?
Click to expand...
Click to collapse
Allows you to apply an EU firmware
slug32 said:
Allows you to apply an EU firmware
Click to expand...
Click to collapse
Awesome!! Does it mean it'll just update to am EU firmware? Or do I have to flash it manually? And would OTA update still work?
dikexpz said:
Awesome!! Does it mean it'll just update to am EU firmware? Or do I have to flash it manually? And would OTA update still work?
Click to expand...
Click to collapse
1) Backup your oeminfo file !!! and then send it to me (if you have the same phone as me)
2) swap the oeminfo file with the Eu one
3) apply a EU firmware
4) relock the bootloader
5) OTA updates will work
Its fairly straight forward and well documented on the forum. i currently have the latest EU firmware on my Chinese AL00 L9 device
slug32 said:
1) Backup your oeminfo file !!! and then send it to me (if you have the same phone as me)
2) swap the oeminfo file with the Eu one
3) apply a EU firmware
4) relock the bootloader
5) OTA updates will work
Its fairly straight forward and well documented on the forum. i currently have the latest EU firmware on my Chinese AL00 L9 device
Click to expand...
Click to collapse
Ya I can send the file to you. Just let me know where it is haha
http://forum.xda-developers.com/showthread.php?t=3374068
Sent from my SM-G850F using Tapatalk
Check my other thread I've put links into the guide ...
Sent from my SM-G850F using Tapatalk
slug32 said:
Check my other thread I've put links into the guide ...
Sent from my SM-G850F using Tapatalk
Click to expand...
Click to collapse
Do you still need OEMINFO? I will be going ahead with a root of the Huawei P9 [ROM][6.0] fRomFuture - NewWorld V2
Yes still need it
Sent from my SM-G850F using Tapatalk
slug32 said:
Yes still need it
Sent from my SM-G850F using Tapatalk
Click to expand...
Click to collapse
I will send you a PM. I have the files
Milamber said:
I will send you a PM. I have the files
Click to expand...
Click to collapse
Cheers dude. Much appreciated
Milamber, Slug32 - could one of you send the oeminfo for EVA-AL00 to me as well? I tried switching to the asia variant using SRKTool and now I am stuck in a weird state. Hoping to get back to the original (or cleanly move to the EU one - but I am not brave enough for that anymore - instructions welcome).
Milamber said:
I will send you a PM. I have the files
Click to expand...
Click to collapse
Mate can you pm also the files? much appreciate thank you
nobody?
MariusLatinu said:
nobody?
Click to expand...
Click to collapse
Hello Do you still need the al00 oeminfo? I can send it to you.
AL00 Oeminfo will be appreciated can someone upload that for everybody?
bannab said:
AL00 Oeminfo will be appreciated can someone upload that for everybody?
Click to expand...
Click to collapse
Yes please

[Stock Rom] [BLA-L29 C432 B140 beta] [Full]

Hi guys, i stumbled on this firmware so i decided to share it with all of you!
This is a Full Stock Rom with working FaceUnlock. Beware, this is beta software so bugs may happen.
It was tested with BLA-L29 C432 (Mate 10 Pro hw/eu) and it was installed using HWOTA8 guide with no repack needed.
It may also work with HuRu tool and my unofficial TWRP, but i didn't tested.
Devices - BLA-L29 C432 (Mate 10 Pro)
- BLA-L09 C432
Build number - 8.0.0.140 Beta
Factory Reset - Not Required
Unlocked Bootloader - Required
Downnload link - https://mega.nz/#F!x4kCBZqS!E-pQMVwbZjUEvQXDEvtiyw
Enjoy it!! ?
Pretoriano80 said:
Hi guys, i stumbled on this firmware so i decided to share it with all of you!
This is a Full Stock Rom with working FaceUnlock. Beware, this is beta software so bugs may happen.
It was tested with BLA-L29 C432 (Mate 10 Pro hw/eu) and it was installed using HWOTA8 guide with no repack needed.
It may also work with HuRu tool and my unofficial TWRP, but i didn't tested.
Devices - BLA-L29 C432 (Mate 10 Pro)
- BLA-L09 C432
Build number - 8.0.0.140 Beta
Factory Reset - Not Required
Unlocked Bootloader - Required
Downnload link - https://mega.nz/#F!x4kCBZqS!E-pQMVwbZjUEvQXDEvtiyw
Enjoy it!!
Click to expand...
Click to collapse
Hi, I have C782. Is this compatible for me? I assumed that number was just part of the build number and the only important info was the model number?
Cheers
androidni said:
Hi, I have C782. Is this compatible for me? I assumed that number was just part of the build number and the only important info was the model number?
Cheers
Click to expand...
Click to collapse
It's just for C432 as i said in the OP, sorry.
Pretoriano80 said:
It's just for C432 as i said in the OP, sorry.
Click to expand...
Click to collapse
OK thanks. As I said, I was unsure if C432 was only part of the build number. Sorry for the newb question
Is this compatible with BLA-L09 C432 ?
Might try it
marra2 said:
Is this compatible with BLA-L09 C432 ?
Might try it
Click to expand...
Click to collapse
Yes,it should work!BLA_L09 file is included in the package.
Cheers, you got different link mega not working for me. Thanks
marra2 said:
Cheers, you got different link mega not working for me. Thanks
Click to expand...
Click to collapse
Nope, just Mega. Maybe someone can upload it for you elsewhere.
Will twrp and magisk work on this build?
blackpanther0582 said:
Will twrp and magisk work on this build?
Click to expand...
Click to collapse
Yes, both work, but SafetyNet will not pass, obviously.
Pretoriano80 said:
Yes, both work, but SafetyNet will not pass, obviously.
Click to expand...
Click to collapse
Thanks for the reply I am. On 8.0.0.135 c185 can I. Fash the rom?
blackpanther0582 said:
Thanks for the reply I am. On 8.0.0.135 c185 can I. Fash the rom?
Click to expand...
Click to collapse
Nope!
I have always thought that as long as it is BLA-L29 then any firmware that starts with BLA-L29 have the same hardware requirement, but only differ at a software level. Myself have flashed many types of BLA-L29 firmwares and never had a problem,,,,
any contribution from experts?
Thanks, wished I had left my BL open
Anywho, this "beta" is it an open beta or more like a leaked closed beta? If it is an open beta, I'd like to know if Huawei has a beta program for European devices and how to sign in.
drhassan said:
I have always thought that as long as it is BLA-L29 then any firmware that starts with BLA-L29 have the same hardware requirement, but only differ at a software level. Myself have flashed many types of BLA-L29 firmwares and never had a problem,,,,
any contribution from experts?
Click to expand...
Click to collapse
This is what i was getting at with my question too, i thought the same.
Hello everyone,
You can also install it even if your bootloader is closed.
By cons it must go through funkyhuawei. I put it through them.
Model BLA-L09C109 rebrand in BLA-L29C432
drhassan said:
I have always thought that as long as it is BLA-L29 then any firmware that starts with BLA-L29 have the same hardware requirement, but only differ at a software level. Myself have flashed many types of BLA-L29 firmwares and never had a problem,,,,
any contribution from experts?
Click to expand...
Click to collapse
androidni said:
This is what i was getting at with my question too, i thought the same.
Click to expand...
Click to collapse
There is a difference in the Firmware, C is Cust/Region of the Firmware.
C185 is Middle East/Africa
C432 is Europe
C636 is Asia/Pacific
There is a lot off different Cust region firmwares, some are from locked providers like Vodafone etc....
If u flash a Firmware with another Cust then yours your Cust will change to C900 and u wont recive OTA updates, in worst case u will brick your phone!
Sent from my LON-L29 using XDA Labs
Pretoriano80 said:
Nope!
Click to expand...
Click to collapse
i managed to get flash the firmware and got it working , But i Themes are not applying and lost Huawei account settings like cloud what might be the reason ?
blackpanther0582 said:
i managed to get flash the firmware and got it working , But i Themes are not applying and lost Huawei account settings like cloud what might be the reason ?
Click to expand...
Click to collapse
You know the reason, you flash it even if you are not on C432! Am i right?
Mostar088 said:
There is a difference in the Firmware, C is Cust/Region of the Firmware.
C185 is Middle East/Africa
C432 is Europe
C636 is Asia/Pacific
There is a lot off different Cust region firmwares, some are from locked providers like Vodafone etc....
If u flash a Firmware with another Cust then yours your Cust will change to C900 and u wont recive OTA updates, in worst case u will brick your phone!
Click to expand...
Click to collapse
Ok, thanks for the info!

How to convert Huawei P10 VTR-L09 to Dual-SIM?

Can anyone tell me how to convert my HUAWEI P10 VTR-L09 to a dual sim?
I need detailed instructions please.
You need HWOTA to rebrand your phone: https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Note that an unlocked bootloader is required. Since Huawei doesn't issue the codes anymore this may cost you a few euros (e.g. DCUnlocker).
M1chiel said:
You need HWOTA to rebrand your phone: https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Note that an unlocked bootloader is required. Since Huawei doesn't issue the codes anymore this may cost you a few euros (e.g. DCUnlocker).
Click to expand...
Click to collapse
Hello M1chiel, now that I have the bootloader code is still possible to make conversion? I mean, afyk is this guide still useful or it is outdated? Thanks
[email protected] said:
Hello M1chiel, now that I have the bootloader code is still possible to make conversion? I mean, afyk is this guide still useful or it is outdated? Thanks
Click to expand...
Click to collapse
I am not sure. Huawei changed the bootloader a few months ago, which makes it impossible to roll back to older versions. I sold my P10, so I do not follow its developments anymore. So please check in the thread.
M1chiel said:
I am not sure. Huawei changed the bootloader a few months ago, which makes it impossible to roll back to older versions. I sold my P10, so I do not follow its developments anymore. So please check in the thread.
Click to expand...
Click to collapse
OK. Thanks for the answer
Rajkv said:
Can anyone tell me how to convert my HUAWEI P10 VTR-L09 to a dual sim?
I need detailed instructions please.
Click to expand...
Click to collapse
Hi, have you successfully converted your phone?

VOG-L29 update problem

Hi there
I have bought a second hand VOG-L29 Dual Sim 256 Gb/8Gb model few weeks a go. For many years i have used Samsung's amiral ships so this i want to use two phone paralel for a while to make sure this decision is true for me.
My device build number and model was 9.1.0.108 (SP2C900E108R1P7) and coudn't update via OTA or hi suite. So i started to search xda for OTG/Download mode update like i know from Samsung's. I have change rom's of my device with stock or custom many times in old devices and had no problem but in Huawei i get error " Your device has loaded a different operating system" I have try two version of rom files which publish in here 10.0.0.186 for C431 and C432.
May be i have choose wrong rom because i can't be sure whole model number which seems like 9.0.0.108(SP2C900E108R1P7).
Help me to find necessary rom version for my p30 pro and i can install it via erecovery OTG/microsd/usb update method.
Thank You
therakula said:
Hi there
I have bought a second hand VOG-L29 Dual Sim 256 Gb/8Gb model few weeks a go. For many years i have used Samsung's amiral ships so this i want to use two phone paralel for a while to make sure this decision is true for me.
My device build number and model was 9.1.0.108 (SP2C900E108R1P7) and coudn't update via OTA or hi suite. So i started to search xda for OTG/Download mode update like i know from Samsung's. I have change rom's of my device with stock or custom many times in old devices and had no problem but in Huawei i get error " Your device has loaded a different operating system" I have try two version of rom files which publish in here 10.0.0.186 for C431 and C432.
May be i have choose wrong rom because i can't be sure whole model number which seems like 9.0.0.108(SP2C900E108R1P7).
Help me to find necessary rom version for my p30 pro and i can install it via erecovery OTG/microsd/usb update method.
Thank You
Click to expand...
Click to collapse
Hi m8,
Usually C900 is the version of the cust that gets flashed another firmware from another device and messes it up. Was your phone bought from a retailer? Do you have an option to return it and get an replacement?
What could bevthe issue? There are 2 options about it :
1. It was a VOG unit intented to be used by the on-line/offline testers or some reviewers and usually those tests devices has C900 cust (in that case it means NO OTA or other updates);
2. It had another cust and previous owner used paid services (as Funky Huawei) to flash firmwares and flashed a wrong one whitch f####d up the cust and without unlocked bootlader you can't change it or rebrand it.
As long as you cannot unlock the bootloader you will be stucked with this problem, even you flash C431 or C432 firmware.
Sent from my LIO-L29 using Tapatalk
Thanks for your reply i searched so many forms but no one has information that you have. I think i don't have chance to return it because device has no warranty so now i looked for other your idea about funky huawei or unlock bootloader. If there is a chance to make it with gsm repair shops helps i will try or is there any method to unlock bootlader from adb in recovery mode.
therakula said:
Thanks for your reply i searched so many forms but no one has information that you have. I think i don't have chance to return it because device has no warranty so now i looked for other your idea about funky huawei or unlock bootloader. If there is a chance to make it with gsm repair shops helps i will try or is there any method to unlock bootlader from adb in recovery mode.
Click to expand...
Click to collapse
Short version :
1. Funky Huawei had an offer of unlocking bootloader codes for 200$, unlock bootloader code that for other OEM's IS FREE (Somy, Samsung, Xiaomi, etc)!!!. I don't reccomend paying a cent to them.
2. On GSM service centers they could change your phone's motherboard (it costs ~300$, depending on version - L29+8GB RAM+512 GB storage). Maybe take a visit to some GSM repair service or search on ebay/amazon for motherboard and buy one then get replaced in a service center.
Hope you get it done, somehow
Sent from my LIO-L29 using Tapatalk
I understand clearly thanks for reply i looked for repair chance
SM-N9500 cihazımdan Tapatalk kullanılarak gönderildi
therakula said:
I understand clearly thanks for reply i looked for repair chance
SM-N9500 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Good luck on repairing it cheaper
Sent from my LIO-L29 using Tapatalk
SilviuO said:
Good luck on repairing it cheaper
Sent from my LIO-L29 using Tapatalk
Click to expand...
Click to collapse
Thread solved my problem like a charm https://forum.xda-developers.com/showpost.php?p=81930419&postcount=463 thank you all
therakula said:
Thread solved my problem like a charm https://forum.xda-developers.com/showpost.php?p=81930419&postcount=463 thank you all
Click to expand...
Click to collapse
Glad my instructions worked for you, m8. I will update my OP with your result about your flashing EMUI 10 v186 C431 on top of C900
Sent from my LIO-L29 using Tapatalk

Categories

Resources