Hi , since my previous phone just broke i was thinking of repairing one of the bricked lumias i have instead of buying a new phone. I chose the Lumia 535,and it seems it can come back to life even without JTAG. The MicroUSBPort is a bit faulty, but i can make it connect correctly by moving the cable to the right,but this is not the real problem it gives.
Here's the problem it gives:
When i plug the charger,the phone vibrates, does not display anything,and then restart and vibrates again each 40 seconds.
When i plug in a PC ,the phone vibrates exactly as it does on the charger but my pc:
First detects the phone as "USB Input Device" before it vibrates.
After the phone vibrates it is detected as QHUSB_BULK, then
when it restarts and vibrates again i hear the device unplug sound from pc
and it detects it as USB Input Device then QHUSB_BULK then it loops until i unplug cable/charger.
I tried(and failed):
To recover using WDRT Lastest Version,but it fails because the phone cannot be detected.
To recover using Thor2 trying to flash a ffu but. THOR2_NO_DEVICE_WITHIN_TIMEOUT.
Seems like there's hope using thor2 because i din't try reflashing bootloader/putting in red screen mode.
Please help me, i'm without phone now!:crying::crying:
Related
My Xperia suddenly developed an issue last week. Upon connecting to my pc for sync, the USB device not recognised popped up and refused to leave. I turned my phone off and turned it back on, and i suddenly have the bootloader screen pop up! After multiple retries, i discovered that connecting it via USB to the pc before turning it on was the only way to get it to turn on normally. It also shows the USB device not recognised when in bootloader mode.
Is there any possible cause and solution to this issue? I have tried a hard reset to no effect, and i cannot flash cos i dont have Hard-Spl
Help
BR
I just woke up to a nightmare. I reached over for my phone and i found it dead unplugged from the charger. I thought to myself... "Alright, let's begin charging it... I probably forgot to put it on the charger last night"
I plugged the phone into the charger and the phone powers on...
After it boots, i it prompts me to connect the phone to my computer... Strange...
I plug in the phone to my computer and Zune pops up with c101002e error code.
Now i did some research and it looked like my phone somehow got bricked... so i found the following link and sure enough, my error code is on the list of known troubles.
The Windows Phone Support Tool is not working on my phone, After following the steps i get the attached screenshot error.
My next step is to reflash... however. Following These instructions, I cant seem to get my phone to boot into the tricolor bootloader screen!
PLEASE HELP! Any input would be greatly appreciated!
You say "After it boots, i it prompts me..." is windows booting before the error pops up?
The phone is off... i plug the charger in, and it boots as in it turns on. Once it turns on, windows does not load. instead it's telling me to connect to computer. I connect to computer and the error appears
already tried an hard reset??
Not able to perform a hard reset... I hold down both volume bottons while the phone is off and press the power/lock button to power it on. while holding on the volume buttons... the phone just goes to the connect to computer screen.
Try taking out the battery. Leave it out for a short while then replace it & check its securely in place. Reboot & see what happens. The phone shouldn't brick when charging or sleeping. Good luck!
Sent from my HD7 using XDA Windows Phone 7 App
Might try this and see if it helps
http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/windows-phone-7-error-code-c101002e/2e7cd10e-4123-46ea-844b-e3aed54eb6bd
may be the camera key is pressed down by the case and stopping it from booting
I do not have a case with the phone but i always did have a problem with that camera buttom... it does seem to be kinda pushed in... I hate this...
what is ur version???
just u can jailbreak the 7004 or 7008 by chevron...
I have a standard SM-N700 Galaxy Gear and had it running null. All seemed fine until one night after a notification tried to come to the watch, the screen flashed white and the watch appeared to shut down. Since then, it hasn't been able to turn on for anything. Below is the steps I've taken to try to recover my smartwatch...
Tried using multiple power supplies, no response (one power supply even caused the charging dock to become a little warm)
Tried holding power for 10 seconds, no response.
Tried repeatedly holding/pressing power (I heard sometimes this can help clear a softlocked device), no response.
Opened the watch and disconnected the battery. When the watch was reconnected, it vibrated once as if it was going to turn on, but didn't do anything further. Repeated attempts at removing the battery had no response, not even a vibrate.
Tried connecting the watch to my PC, the computer beeped that a device was connected and reported that there was no driver for "sec s5pc210 test b/d". I checked and the standard Samsung USB Drivers are installed. Tried other USB cables and USB ports, either the computer gives the beep of a malfunctioning USB device, or beeps as if something connected, but then the device seems to disappear.
I've read some resources that suggest that either the watch is completely fried, or somehow during an update to Gear Manager, it corrupted or damaged the bootloader of the watch, and after the watch attempted to reboot, it failed and got stuck in the condition it is in now. Based on these resources, there's supposed to be a way using Odin to flash a proper bootloader to the device, but since it does not appear to stay connected for more than an instant, and when it does connect it appears as this "sec s5pc210 test b/d" device, the tools I've tried to flash the bootloader have failed.
I really don't want to have to replace this device. Having a Samsung watch that still runs plain Android is not something I want to give up.
Hi, yesterday my phone hangs on using apps and won't react to anything. So i have done a hard power off with power+vol up. Next i tried to start the device again and nothing The device won't start into any mode (system/bootloader/flash) and no lights etc. So i checked some threads in net and tried to plug in charger over night. Today behaviour has changed a little bit. When connecting to pc device is detected as usb device with error in getting description. This is the only reaction of the device. Again doing a hard power off etc. won't work (also no vibration).
Has anybody had same behaviour and could fix it ?
System is unlocked and was running with cm12.1.
Before you ask: pcc etc. also won't wark cause usb-connect won't work corectly.
Here's the story:
I was tried to unlock bootloader my lumia 925 by WPinternals. When it was about 31% app crashed and exit, I tried restarted app several time. but it still crashed. I held the power button to turned it off and when I reconnected the phone nothing happened pc not shown any new connected device and the windows button on the phone keep flickering. When I hold power button or any combine button the phone just vibrate and the screen just black. I've tried every flashing method but my pc not recognized so nothing worked. So what can I do to my phone. Is there any how to make my pc recognize the phone.
Thank for reading and help .
Sybyl said:
Here's the story:
I was tried to unlock bootloader my lumia 925 by WPinternals. When it was about 31% app crashed and exit, I tried restarted app several time. but it still crashed. I held the power button to turned it off and when I reconnected the phone nothing happened pc not shown any new connected device and the windows button on the phone keep flickering. When I hold power button or any combine button the phone just vibrate and the screen just black. I've tried every flashing method but my pc not recognized so nothing worked. So what can I do to my phone. Is there any how to make my pc recognize the phone.
Thank for reading and help .
Click to expand...
Click to collapse
<-
First of all you should try to charge the 925 for several hours. Normally, a lightened Windows button indicates a completely drained battery. It will take quite a while until at least the charging symbol appears on the display. Later on you will see if you arrive at QSB in Device Manager or if you can return to flash mode.
Best wishes,
Joachim
JoachimP said:
First of all you should try to charge the 925 for several hours. Normally, a lightened Windows button indicates a completely drained battery. It will take quite a while until at least the charging symbol appears on the display. Later on you will see if you arrive at QSB in Device Manager or if you can return to flash mode.
Best wishes,
Joachim
Click to expand...
Click to collapse
I tried and charged it for almost a day but nothing happened, my computer still couldn't see it.
try using windows device recovery tool..
it same happened with me and I used WDRT and it detected my device..
Dude... You have a dead-boot lumia.
Solution: JTAG (cuz my method of unbricking dead-boot lumia is not working, boots to QUALCOMM Modem Mode)