{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/**
* You flash this ROM at your own risk and responsibility.
* This ROM is provided without ANY WARRANTY WHATSOEVER, not even the warranty that it works.
* None of the developers of this ROM will be held accountable for any damages, complaints or thermonuclear war.
**/
Introduction
This is LineageOS 14.1 for our ZUK Z2 Pro (z2_row, z2121).
This ROM is mainly an adaptation of fedor917 and davidevinavil's superb work on this device. My sources are continuously being updated to their changes and improved to better work for LineageOS.
Features
LineageOS 14.1 with Android 7.1.2, including all features from LineageOS.
Always updated to the latest upstream sources and security patches
Clean builds without any additional bloatware
Updated every 2/4 weeks
Known Issues
You can view a list of the currently open known issues at the Github issue page for the device sources.
Requirements
Unlocked bootloader
Latest TWRP (Link)
Reading this whole post. If you don't read the post, it's important that you read at least the FAQ. If you don't read it and then ask stupid questions, I reserve my right to make fun of you.
Your Z2 Pro and your brains
Installation instructions
Wipe system, cache and dalvik
If not flashing over a LineageOS 14.1 build, wipe data
Flash the ROM
Flash root if you want (Link)
Flash GAPPS if wanted (Link, select arm64, android 7.1. Also I recommend pico variant)
Reboot
Downloads and changelogs
PLEASE, DO NOT MIRROR
All releases: Link
Credits
Thanks to Fedor, Davide, dd3, varontone, SuperLamic, francesco and all other contributors!
Dev information
Contributors
varotone, davidevinavil, fedor917, CallMESuper, SuperLamic, IronColeman, cosmedd, many others
Source Code: https://github.com/z2-dev/
(pull request welcome )
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.18.x
XDA:DevDB Information
LineageOS, ROM for the Lenovo Zuk Z2 Pro
Contributors
cosmedd
ROM OS Version: 7.x Nougat
Version Information
Status: No Longer Updated
Created 2017-10-18
Last Updated 2018-03-04
FAQ
Does this ROM have OTA updates?
Yes.
WiFi not working?
Please make sure you're on the latest baseband before reporting these bugs. Also remember that flashing a new baseband may re-lock your bootloader and you'll have to unlock it again. Search the forum for more info.
LTE/Calls not working?
Please make sure you're on the latest baseband before reporting these bugs. Also remember that flashing a new baseband may re-lock your bootloader and you'll have to unlock it again. Search the forum for more info.
The U-Touch settings are not in my language?
Some of the U-Touch strings were added by Fedor and others by varotone. I don't know any languages other than Spanish and English.
If you want to translate the settings, send me a DM with this file translated to your language, plus which language it is and from which country. You can also send pull requests - do NOT open issues for this.
What's with the root in this ROM?
LineageOS have dropped prerooted roms in favor of a separate root addon. It is the one linked in the first post. This is managed in "Developer options" after you've flashed it.
You can also flash other root options (SuperSU, Magisk, etc.) if you prefer.
How can I contribute to this ROM?
You can contribute to my sources on GitHub by doing pull requests or issues. If you're serious about it, contact me and we can setup an organization.
You can also contributing by reporting bugs and errors, always accompanied by a logcat and a sufficient description of the bug. Please check it's not a known bug first.
Can you add PIE controls / Omniswitch / this app...?
No. I only build clean, bloatware-free LineageOS ROMs, without any extras.
You're running late on your updates!
This is not my job, and I actually have one. I will try to update frequently but I cannot promise anything.
Reporting bugs
Should I report this bug?
If you find a bug you want to report, please check these things first:
It's actually a bug:
Missing functionalities generally are not bugs. Bugs are things that are there, are supposed to work, but don't work. For example: camera crashes are bugs, but "there isn't a navbar option" isn't.
As stated in the FAQ, I only build clean LineageOS, so only things in base LineageOS will make it to the rom.
If some functionality is missing, wait until LineageOS includes it, do not ask me. This includes: navbar options, more quicksettings tiles, theme engine, etc.
It's not already been reported:
Check the "Known Issues" list in the first post, and see if your bug is there before reporting it.
It's related to the ROM itself:
I will only accept bug reports related to the ROM. That means I won't accept bugs related to DivineBeats, Xposed, Atmos or any other addons. Those addons have their own support threads in xda or similar forums.
How do I report this bug?
Once you confirm you've got a bug and it's not been reported yet, you shall do the following:
Capture a log.
There are plenty of tutorials on using logcat on the internet. You should reboot the phone, reproduce the bug and capture the logcat then. Do not send me logcats when the phone it's been on for hours.
Send the bug report.
Either make a post here, or open an issue in the github page. Make sure to write a sufficient description of the bug and instructions to reproduce it, and attach (attach, NOT paste) the relevant logs.
Bonus - dmesg: There's another type of log apart from logcat which is also useful called the dmesg. Again, there are tutorials on the internet on how to capture one. If you can also provide a dmesg, besides the logcat, that would be great! But remember, logcat is essential, I can't do anything without a logcat.
Bonus 2 - ramoops: If the phone hangs (black screen with led) you can get the logs by rebooting and getting the console ramoops:
Code:
adb shell cat /sys/fs/pstore/console-ramoops > ramoops.txt
Run this code on your computer after a reboot to get your ramoops log.
My bug is already reported, how can I help?
You can read the relevant GitHub issue and provide any missing relevant information via comments. If you see a bug with the needs-logs tag, that means no logs are available, so you can contribute by providing them.
NOTE: "I also have this bug" is NOT relevant information if the bug is already verified. Such comments will be deleted, and their author shamed. You've been warned.
Based on varotone FAQ for z2_plus.
Thanks for wpa2 security patch! Nice rom!
For those who don't know this ROM have the best smoothness of all ZUK Z2 Pro custom ROMs. Even AEX with OC void Kernel is not fast as this ROM.
Bryandu13 said:
For those who don't know this ROM have the best smoothness of all ZUK Z2 Pro custom ROMs. Even AEX with OC void Kernel is not fast as this ROM.
Click to expand...
Click to collapse
So i've installed it just now and it's pretty slow in setupwizard, i'll see what it'll show next, but for first moments of usage it's worse than regular mokee with same gapps package and magisk, even animations feels like lagged somehow
kingracer said:
So i've installed it just now and it's pretty slow in setupwizard, i'll see what it'll show next, but for first moments of usage it's worse than regular mokee with same gapps package and magisk, even animations feels like lagged somehow
Click to expand...
Click to collapse
Strange, the mine didn't needed time too be smooth. Try another clean flash
Envoyé de mon ZUK Z2121 en utilisant Tapatalk
Bryandu13 said:
Strange, the mine didn't needed time too be smooth. Try another clean flash
Envoyé de mon ZUK Z2121 en utilisant Tapatalk
Click to expand...
Click to collapse
But this was clean too... And i've used stock gapps package btw, but i've used it before in any rom which i've tried
Upd. Now when i'm trying to get into twrp it just stucks with blue led...
Upd.2. After 3 forced reboots it finally booted into twrp... For now i'll come back to my regular rom... IDK what happened, but any LOS on my device is pretty laggy...
kingracer said:
But this was clean too... And i've used stock gapps package btw, but i've used it before in any rom which i've tried
Upd. Now when i'm trying to get into twrp it just stucks with blue led...
Upd.2. After 3 forced reboots it finally booted into twrp... For now i'll come back to my regular rom... IDK what happened, but any LOS on my device is pretty laggy...
Click to expand...
Click to collapse
Very unlucky :/
For me it will be my definive ROM untill very stable 8.0 ROM be released.
Envoyé de mon ZUK Z2121 en utilisant Tapatalk
Hello, I wonder if file-based-encryption works(with the twrp link in OP) . You know test with it means a full wipe of /data, so it would be very appreciative if you can confirm it. AFAIK it won't work on davidevinavil's twrp 3.1.1 (with AEX 4.6)
bug:
first boot up, the color temperature is normal, but after locked the screen and unlocked the screen, the color temperature become warm color temperature, the screen is a little yellow.
back to home screen is a little delay.
gdtv said:
bug:
first boot up, the color temperature is normal, but after locked the screen and unlocked the screen, the color temperature become warm color temperature, the screen is a little yellow.
Click to expand...
Click to collapse
Maybe the live Display.
Envoyé de mon ZUK Z2121 en utilisant Tapatalk
I very much happy with the ROM thank you Cosmedd.
Zhealth works great but it force closes by it self after a while also when I change the language of the device other than English Zhealth changes to Chinese I hope there is a way to force it to English or translate it.
Here how I installed it:
1- Back up your data.
2- flash latest stock ZUI, boot up, then install TWRP by Cosmedd.
3-wipe data and internal storage then copy and flash the ROM, gapps and root if you prefer.
ZeZ6 said:
I very much happy with the ROM thank you Cosmedd.
Zhealth works great but it force closes by it self after a while also when I change the language of the device other than English Zhealth changes to Chinese I hope there is a way to force it to English or translate it.
Here how I installed it:
1- Back up your data.
2- flash latest stock ZUI, boot up, then install TWRP by Cosmedd.
3-wipe data and internal storage then copy and flash the ROM, gapps and root if you prefer.
Click to expand...
Click to collapse
Are u serious? you're telling this ROM has Zhealth app and it is working?
bluexp said:
Are u serious? you're telling this ROM has Zhealth app and it is working?
Click to expand...
Click to collapse
Yes, but Idk how to use the sensor under the camera.
Envoyé de mon ZUK Z2121 en utilisant Tapatalk
Bryandu13 said:
Yes, but Idk how to use the sensor under the camera.
Envoyé de mon ZUK Z2121 en utilisant Tapatalk
Click to expand...
Click to collapse
I installed this ROM today, and it seems that zhealth app does not have sensor reading functions.
Anyway, a good step forward
Great Rom, everything works fine! No issues at all. Clock-speed only 1.8 Ghz, but fast enough... Thank You!
Thanks , can i recording un 1080p 60 fps with the camera app?
dermpuma said:
Thanks , can i recording un 1080p 60 fps with the camera app?
Click to expand...
Click to collapse
Yes
Envoyé de mon ZUK Z2121 en utilisant Tapatalk
Feedback ROM
Hi all,
stealthmopped said:
Great Rom, everything works fine! No issues at all. Clock-speed only 1.8 Ghz, but fast enough... Thank You!
Click to expand...
Click to collapse
great ROM, no issues so far except that all monitoring apps report maximum CPU frequencies of 1.8GHz instead of 2.15GHz.
Regards
Joe
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We (Team Revior) are working on CyanogenMod 14.1 for dior. It's pretty stable at the moment but still needs some work. We're providing daily builds for the "Flashaholics".
What's working :
Everything!
What's not working :
You cannot access the sdcard with CM File Manager.
Instructions :
Download the latest build and GApps
Reboot to recovery TWRP
Wipe Data, System and Cache if it's a fresh install.
No wipes required if you're updating from a previous build of CM 14.x (Wipe Cache and Dalvik Cache recommended).
Flash the latest build and GApps
No GApps flash needed if you're updating from a previous build of CM 14.x
Reboot
KitKat bootloader/modem is required, you can find it on post 2.
Downloads :
ROM: Link
Google Apps: OpenGApps
Download for 7.1, arm, pico only!
Please donate to me on PAYTM: 8178299693 | Every little bit helps
XDA:DevDB Information
CyanogenMod-14.1 for the Redmi Note 4G (dior, QCOM only), ROM for the Xiaomi Redmi Note
Contributors
ashishkotnala29, msfkonsole, gerrett, @myhellonearth, @haoyangw, @audahadi, @subdragonzj and other members of Team Revior. Also @fefifofum, armani-dev, open source community
Source Code: https://github.com/ashishkotnala29?tab=repositories
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KitKat Bootloader/Modem (post 2)
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2016-11-01
Last Updated 2016-12-04
Bug reports:
cm-14.1 is in active development and still not considered stable. Please, try to focus on device specific bugs and don't complain about CM bugs or missing features. If you found a (device specific) bug, explain how to reproduce it and attach logs (logcat and dmesg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (xposed, supersu, third party kernel).
KitKat bootloader/modem files
This zip contains the bootloader and modem files from latest stable international release (MIUI8 V8.1.2.0 KitKat). I made it so users don't have to download and install the official zip, which also includes the ROM. It's a flashable zip, so just install it from recovery and reboot (no wipes required).
Firmware 8.1.2.0: https://drive.google.com/file/d/0B4efKPhK4kOSSXY4Y3k0aDFQRGM/view?usp=sharing
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '2G/3G/LTE only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) How do I update GApps? (Also useful if you have GApps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + GApps. Reboot.
That is really fast. Keep it up.
Yes, yes, yes....?
Erwin AW said:
Yes, yes, yes....��
Click to expand...
Click to collapse
muy buen trabajo
Sorry to say nothing works. Telephone, audio, video, BT except for wifi, messaging and camera. I didn't check with 3rd party applications. GAPPS-PICO could not be flashed. Had to remove certain applications to enable it to flash. Cannot play audio or video files. There is a time lag while making a call but no audio. Browser opens but you cannot play videos. Advanced reboot doesn't work.
Updated to build 20161102.
Edit1: Damn! I did a real blunder in compiling cm14.1... will fix all issues soon...
Edit2: download updated build and test please...
Maybe you could focus on 7.1? Just personal opinion...
Anyway here's my big THANKS and worship
Hello, I'm testing the ROM, just an hour with her, the videos on Youtube gives playback error not hear the speakers when I put a sound. fix the audio app closes, as the browser. the camera does not record, take pictures if. waiting to be corrected because of the rest he's good so far. excuse the English, use a translator.
Enviado desde mi HM NOTE 1LTE TD mediante Tapatalk
ashishkotnala29 said:
reserved!
Click to expand...
Click to collapse
Well, 7.1 is immature, and microphone broke. Please fix that, i really need my mircophone for my study.
Btw just bought an Pixel XL?????
Sent from my Pixel XL using Tapatalk
hello, how will this ROM? I see that on the download page there are updates, the day 3 but I installed it does not advance the configuration. closes.
Enviado desde mi HM NOTE 1LTE TD mediante Tapatalk
Does recent ROM are stable enough to upgrade. And why I can't long press in app icon to see option @moderator
I can't quote your name bcuz it is too long to remember. Sorry Op
Sent from my Pixel XL using Tapatalk
I installed the versions that are on the download page and still presents problems in microphone, audio fix app closes, not the loud sounds. hopefully better because the ROM promises.
Enviado desde mi HM NOTE 1LTE TD mediante Tapatalk
Is this a stable rom for daily use??
Hey friend,
I appreciate your work
I just wanna know if the rom is
stable
and all its functions are working well (i.e. Camera, Phone, Wifi, Mobile Network, Bluetooth, LTE & other essential feature)
{And i had a question
Can we use other variants of GAPPS
( like super,stock,full or mini etc) rather than "pico"
And if No
Why?????????????????
}
Sent from: HM NOTE 1LTE
hacker's world said:
Hey friend,
I appreciate your work
I just wanna know if the rom is
stable
and all its functions are working well (i.e. Camera, Phone, Wifi, Mobile Network, Bluetooth, LTE & other essential feature)
{And i had a question
Can we use other variants of GAPPS
( like super,stock,full or mini etc) rather than "pico"
And if No
Why?????????????????
}
Sent from: HM NOTE 1LTE
Click to expand...
Click to collapse
This ROM is stable enough for daily use if u don't mind the camera. And we can choose other Gapps like full, stock, aroma as well, but I think pico is fit for a 2 GB ram device.
Edit: and also microphone not work SAD
Sent from my Pixel XL using Tapatalk
Hello, this ROM is that the end? I have been installing updates that are hanging which is also the CM 14, but there is no progress. It gives the same mistakes. and hopefully we can have well polished is CM 14.1
Enviado desde mi HM NOTE 1LTE TD mediante Tapatalk
sound, mic, etc. issues are fixed since build 20161106. Now CM side issues remain which would be fixed by CM itself.
ashishkotnala29 said:
sound, mic, etc. issues are fixed since build 20161106. Now CM side issues remain which would be fixed by CM itself.
Click to expand...
Click to collapse
You say that is corrected? I installed the version of 20161106 and follow the same audio problems fx, no speakers are heard, the Youtube app gives playback problems, calls have a short delay to leave and not listen sounds,
Enviado desde mi HM NOTE 1LTE TD mediante Tapatalk
huyhuyvu01 said:
This ROM is stable enough for daily use if u don't mind the camera. And we can choose other Gapps like full, stock, aroma as well, but I think pico is fit for a 2 GB ram device.
Edit: and also microphone not work SAD
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Thanks for your precious time
But i have a few more queries
"will the 'microphone' problem be sorted in future
including the 'camera' problem
and what is the the estimated time for it
a week, a month or a year!?!
I could have sacrificed the camera problem i guess but microphone is important for those who'll use this on daily basis including me
So, i will be flashing rom for the first time because I'm obsessed with KITKAT 4.4.4 though i have MIUI 8 (Latest version of MIUI)
And i dont think Xiaomi will give note 4g any attention in future too
Well i want to switch to a new phone but my parent stumbling me
I want to experience Android 7.1 Nougat including all its new awesome features I'm really excited about it but i can't probably use this ROM without a working 'microphone'
I appreciate your work
but i look forward for a fully functioning cm14.1 ROM
venefroyo said:
You say that is corrected? I installed the version of 20161106 and follow the same audio problems fx, no speakers are heard, the Youtube app gives playback problems, calls have a short delay to leave and not listen sounds,
Enviado desde mi HM NOTE 1LTE TD mediante Tapatalk
Click to expand...
Click to collapse
make sure you did a clean flash. audio issues are really fixed!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
nearly everything
What's not working ( due to no kernel source ) :
Live Display is software only
Ambient Display is disabled
Missing vibration intensity preference
F2FS
Sometimes fingerprint sensor not work(turn off the screen and turn on to fix it)
Temporary device specific changes :
This fixes the multi touch issue:
https://review.lineageos.org/#/c/166416/
device tree:
https://github.com/thune-xiaobai/android_device_xiaomi_capricorn/tree/cm-14.1
vendor tree:
https://github.com/thune-xiaobai/android_vendor_xiaomi_capricorn
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds : https://drive.google.com/file/d/0B_SYQSdSx0sqRkJZbXVWS01idTA/view?usp=sharing
Root addon : https://download.lineageos.org/extras
Google Apps : http://opengapps.org/
XDA:DevDB Information
capricorn, ROM for the Xiaomi Mi 5s
Contributors
xiaobai112220
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Created 2017-03-28
Last Updated 2017-03-28
thanks for make thread rom, downloading now, will give report soon
Yay[emoji120]
Skickat från min MI 5s via Tapatalk
Thank you for all your work and for sharing it. This is highly appreciated!
thanks so much for creating a thread.
any news on the source kernel release state?
ps: can you add a donation button for your profile?
fyi: installed the latest version over the 122 Build with wiping dalvik chache after, works properly without any bootloops.
I have a weird bug... on every startup the Alarm (set for the next morning) starts ringing. This was the case on the 311 build for me as well.
Some (dumm) questions to clarify...
Hey,
i was following the discussion in the other thread - also a big thanks from my side and a really cool!
Questions:
1) I don´t really get the comment to the multi touch problem. Yes there is a link but do i need to actively flash something after installing latest build? Or does it mean there is a work around integrated with the last build with the specific code from the link.
So: Yes - you still need to flash something for multiply touch support OR No - all is good for now just flash it!
2) Sorry, just want to be sure - Google Apps: ARM64 Version right?
Yes right ARM64 / No, its wrong
3) If it happens that there will be also a official Linage OS buid, can i just flash it than without wipe/reset the phone or do i have to install it new? I know we cant say it jet but:
A) You will need to wipe - for sure!
B) Likely you will not need to wipe.
C) It is absolutly open and nobody has a Glas-Ball to find out jet, so 50/50
4) What is "Live Display is software inly" - i could not find out what is meant with "Live Display" via Google excatly. Sorry if it is a dumm question.
Thanks so much for making this development possible. Hope my questions are not too dumm ones and fast and easy to answer.
Sebastian - Greetings from Yangon! Got my Mi5s for only 268 Euros here ( 4/128GB) 400000Kyts
Hey there!
Everything works as expected (camera bug is still there - as expected), the rest is flawless.
Thanks for all the hard work!
Please (I keep requesting this), could you (or somebody else contributing to the build) add the hardware button switching option (using the already working script from @ru1dev) ? It would be great to have it embedded in the ROM. I am sure many people want to use the Nexus/Pixel/Stock navigation experience (back, home, recents button order).
There seems to be a "bug" in all these builds: Pixel icons (from Open Gapps) don't seem to work (they do in other ROMs based on @xiaobai112220 's sourcetree). Maybe I'm just doing something wrong... don't know - but I can live with that.
Thanks a bunch! Keep up the good work!
Install in progress....
Wastman86 said:
Hey,
i was following the discussion in the other thread - also a big thanks from my side and a really cool!
Questions:
1) I don´t really get the comment to the multi touch problem. Yes there is a link but do i need to actively flash something after installing latest build? Or does it mean there is a work around integrated with the last build with the specific code from the link.
So: Yes - you still need to flash something for multiply touch support OR No - all is good for now just flash it!
2) Sorry, just want to be sure - Google Apps: ARM64 Version right?
Yes right ARM64 / No, its wrong
3) If it happens that there will be also a official Linage OS buid, can i just flash it than without wipe/reset the phone or do i have to install it new? I know we cant say it jet but:
A) You will need to wipe - for sure!
B) Likely you will not need to wipe.
C) It is absolutly open and nobody has a Glas-Ball to find out jet, so 50/50
4) What is "Live Display is software inly" - i could not find out what is meant with "Live Display" via Google excatly. Sorry if it is a dumm question.
Thanks so much for making this development possible. Hope my questions are not too dumm ones and fast and easy to answer.
Sebastian - Greetings from Yangon! Got my Mi5s for only 268 Euros here ( 4/128GB) 400000Kyts
Click to expand...
Click to collapse
No/Yes/B or C/Live display feature on settings
Today's version is very fluid and very stable. Thank you 谢谢! I can only imagine that you will make a perfect Lineage firmware once Xiaomi releases the kernel source code for Mi5s. :fingers-crossed:
You did it, now i can like my mi5s. We will feedback any issues and it's going to be great. Thank you for taking the time and doing it.
I was waiting for this thread for too long, thank you for making it and sharing a new build. I really appreciate your work. Good job.
nice job!
Installing this version later today! Thanks for your work @xiaobai112220!
Enviado desde mi MI 5s mediante Tapatalk
Installing today ! All work fine.
Just a little issue on boot : date is 06/10/1970 during 3s before syncing with my network.
Fingerprint not working - rest looks very good!
Hey, just tested the rom - like it!
I have one bug:
When trying to set up fingerprint sensor for unlocking from lock screen, the wizard/app always crashes. So i was not possible for me to set up a fingerprint to unlock the device.
Anybody has the same experience or is it only me ?
Thanks for the rom again!
Wastman86 said:
Hey, just tested the rom - like it!
I have one bug:
When trying to set up fingerprint sensor for unlocking from lock screen, the wizard/app always crashes. So i was not possible for me to set up a fingerprint to unlock the device.
Anybody has the same experience or is it only me ?
Thanks for the rom again!
Click to expand...
Click to collapse
Hi @Wastman86, I set up four fingerprints during the initial settings configuration without problems. I've tried right now to set up another fingerprint and it works fine ?
Maybe you forget to wipe cache/dalvik after flashing the ROM...
llaumgui007 said:
Just a little issue on boot : date is 06/10/1970 during 3s before syncing with my network.
Click to expand...
Click to collapse
I'm not the only one: https://jira.lineageos.org/browse/REGRESSION-145?attachmentViewMode=list
WarioNeila86 said:
Hi @Wastman86, I set up four fingerprints during the initial settings configuration without problems. I've tried right now to set up another fingerprint and it works fine
Maybe you forget to wipe cache/dalvik after flashing the ROM...
Click to expand...
Click to collapse
Ok interesting.
I did a wipe before i installed the ROM but not after.
It should make no difference to clear the old "files" from the previously ROM before or after flashing the system partition, right? I might be wrong though...
Sebastian
Introduction
LineageOS 14.1 designed and built for MI MAX 2
Click to expand...
Click to collapse
Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Click "Screenshots" on top left for more)
Click to expand...
Click to collapse
Downloads
MOD EDIT Download removed
Click to expand...
Click to collapse
Installation instructions
Just like any device flashing using TWRP, before which you need xiaomi oem unlocking
Unlock bootloader >> && install TWRP
Boot into TWRP recovery by holding Volume Up
Download ROM file in your PC, transfer ROM file to phone with MTP access
Wipe -> Wipe data if it was not LineageOS 14.1
Install -> select ROM file you just download, swipe to flash
Click to expand...
Click to collapse
Features
MIUIv5 like navigation buttons haptic feedback
Brevent (formerly "Prevent Running") integrated
Clean, no bloatware
Click to expand...
Click to collapse
Warning: Although this is designed for Max 2, this project is in Beta test status.
Warning: Brevent (which was "Prevent running") is built into this ROM. For any IME or Tasker like app that need foreground running, remove the app from Brevent.
Donation
Consider donate to the author to get this ROM better
Paypal.com or QQ: [email protected]
Alipay Donate:
Click to expand...
Click to collapse
The kernel in this ROM is taken from stock rom. No source released by Xiaomi O.E.M. yet
XDA:DevDB Information
android_device_xiaomi_oxygen, ROM for the Xiaomi Mi Max 2
Contributors
xuefer
Source Code: https://github.com/xuefer/android_device_xiaomi_oxygen
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Testing
Current Beta Version: 1005
Beta Release Date: 2017-10-05
Created 2017-07-11
Last Updated 2017-10-05
This project is still in develop. Donate if you like this project
Current buggy/non working:
MI SIM not working (no idea how to support it)
What's working/fixed
Display color fixed, disabled color profile while keeping other SDM effects
WiFi fixed. MAC address need fixed
Bluetooth
headphone-jack
Phone calls
Phone IMS setting won't crash any more
RIL stable, thanks to getting rid of MI3TD special changes
SMS
Dual SIM/LTE
LED/Lights, HAL driver written (modified source from MI3 TD), but LineageOS support 256 levels only
Touch, Vibration, Sensors
Fingerprint fixed
packed firmware into lineage_oxygen_*.zip (firmware need to match blobs version)
WIP status (not published yet)
Infra-red
Sorry for the delay. I was busy with my house and the device was given to my dad. I'll try to fix Bluetooth issue. for any boot loop issue, please really provide log like i describe in one of the reply
Thank you for the donation
ChangeLog:
1005:
0826:
adds widevine drm
0823:
0811:
fixes for goodix fingerprint sensor
fixes white led-blink (custom brightness is N/A for blinking, limited by kernel)
removes fingerprint no longer map as dpad center button
DPI reset to 480 (default) instead of the real-world value. fix play store app compatibility issue
Nobody can try it, because there isn't a Download Link?
Bugs? VoLTE? Battery life? Camera quality and errors?
Please share the Download link.
Thanks
Thought place holders where against the rules.
Nice to see some work on the Max 2 though..
Sent from my MI MAX 2 using Tapatalk
Skorpi58 said:
Nobody can try it, because there isn't a Download Link?
Click to expand...
Click to collapse
JayBee89 said:
Please share the Download link.
Thanks
Click to expand...
Click to collapse
Thanks for your attentions. I've post the download link, but be aware that this is in non-working state, not for daily use
xuefer said:
Thanks for your attentions. I've post the download link, but be aware that this is in non-working state, not for daily use
Click to expand...
Click to collapse
Thank you for download link!
And what exactly is NOT working? Or you mean just various possible bugs?
Akemdwr said:
Thank you for download link!
And what exactly is NOT working? Or you mean just various possible bugs?
Click to expand...
Click to collapse
Thanks for asking. I've added status on #2
If I am on official global ROM, I need — Advanced wipe, wipe: dalvik, cash, data, system; or just wipe data?
And after flash will be TWRP still working, so I can return to backup without PC?
Sorry if my questions are a little nubish, my previous devise was sony, on 5 android, nougat and xiaomi are still complicated for me.
Nice seeing Lineage coming, thanks Xuefer.
Won't install until wifi/bluetooth/sound works, but I'm already excited
hayatesan said:
Nice seeing Lineage coming, thanks Xuefer.
Won't install until wifi/bluetooth/sound works, but I'm already excited
Click to expand...
Click to collapse
what about "RIL get restarted periodically" :cyclops:
wifi(with correct mac)/bluetooth done
ear-piece/speaker doesn't work for now but all other seems fine, including sound over bluetooth, sound over Wireless Display
it's really hard to track things down, took me hours to get each problem fixed. let's hope if someone donate
Great work.:good:
it looks good
Guess who I am
Iceplumepasses said:
Guess who I am
Click to expand...
Click to collapse
Our beautiful sister.:laugh:
Trying this many thanks!
Btw is there an official development thread or is this it?
cobram3 said:
Trying this many thanks!
Btw is there an official development thread or is this it?
Click to expand...
Click to collapse
it depends on what you mean by "official"
I made both this ROM and this thread, yes, official
for LineageOS: since there's no kernel source release by xiaomi, i guess it won't be accepted by LineageOS
for other independent work on same goal, there is, however comes with bloat-ware, can be found on miui.com thread
I hope this becomes official and maintained / developed.
Akemdwr said:
If I am on official global ROM, I need — Advanced wipe, wipe: dalvik, cash, data, system; or just wipe data?
And after flash will be TWRP still working, so I can return to backup without PC?
Sorry if my questions are a little nubish, my previous devise was sony, on 5 android, nougat and xiaomi are still complicated for me.
Click to expand...
Click to collapse
you need to:
back up data if you want
wipe cache if you want
wipe data is required (which also wipe dalvik-cache)
to flash back MIUI, restore data (or wipe data), flash MIUI full zip
as of now this version: do NOT auto reboot, do NOT reboot using GUI button. hold hardware button key for a few seconds so it power off, then power on, you're good to go, wait a few minutes for the initial boot
Last Update 17.7...Download Link 12.7..??????
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
We recommend MindTheGApps. OpenGApps should work, but please make sure you clearly mention the gapps you're using when reporting bugs.
Notice:
For this ROM to work you need to use the latest ODM Images. If you need additional guidance on how to do that, please refer to Sonys Guide on how to flash an ODM Image.
Get CarbonROM
Changelog
Join the CarbonROM Discord server
GitHub
Gerrit
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonROM, ROM for the Sony Xperia XZ
Contributors
Myself5, CarbonROM
Source Code: https://github.com/CarbonROM
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Nightly
Created 2018-03-31
Last Updated 2018-07-19
No one tried this rom yet? I have a problem over here. It keeps asking for password after the CarbonROM logo even though I wipe everything clear, any ideas? What I was doing was flash 41.3.A.2.99 with everything wiped, flash ODM, flash TWRP, flash the rom and then Pico OpenGapps. Something wrong with my procedure? Thanks in advance.
EDIT1 : Oh yeah, forgot to mention my device is F8332, it isn't supported?
LuthfiKun said:
No one tried this rom yet? I have a problem over here. It keeps asking for password after the CarbonROM logo even though I wipe everything clear, any ideas? What I was doing was flash 41.3.A.2.99 with everything wiped, flash ODM, flash TWRP, flash the rom and then Pico OpenGapps. Something wrong with my procedure? Thanks in advance.
EDIT1 : Oh yeah, forgot to mention my device is F8332, it isn't supported?
Click to expand...
Click to collapse
Use the "format data" option in TWRP to get rid of encryption, wipe doesn't clear encryption. If coming from stock, thats necessary unfortunately due to differences in the encryption used. Otherwise (if coming from AOSP) the password its asking for would be the one you used before.
Dual sim support?
Myself5 said:
Use the "format data" option in TWRP to get rid of encryption, wipe doesn't clear encryption. If coming from stock, thats necessary unfortunately due to differences in the encryption used. Otherwise (if coming from AOSP) the password its asking for would be the one you used before.
Click to expand...
Click to collapse
Alright format it is.
agentsandy007 said:
Dual sim support?
Click to expand...
Click to collapse
No it isn't. At least out of the box. You can find a patch on Sony AOSP Build thread.
Volte Supported??
First of all, thanks alot @Myself5 and all other devs, who are working hard to bring this to our XZ :good:
My experiences after 1 day:
- rom is very smooth and snappy.
- root via Magisk v16 & Xposed 90.1-beta3 (systemless) works flawlessly
- the fp sensor always works, but it's not as sensitive as with stock
- night light worked - until I've installed Substratum and a Substratum theme, but after that it doesn't work anymore (even after deactivating, uninstalling the theme, a system restart and deinstalling the Substratum app it sill doesn't work). Also a dirty flash of the rom.zip didn't help to get it working again.
- the build-in camera takes acceptable pics (not as well as the stock camera, but acceptable); also focussing is a little slower than stock. Another thing is, it's not possible to chance the location to save the pics to the ext. sdcard.
- formatted as a portable storage, the ext. sdcard item on the left of the status bar can't be removed (see attachement)
- the battery consumption is a bit high (from 100 % to 98 % in 1 h - without doing anything)
But in the whole, it's really promising for th 1st official build :good::good::good:
Klaus N. said:
First of all, thanks alot @Myself5 and all other devs, who are working hard to bring this to our XZ :good:
My experiences after 1 day:
- rom is very smooth and snappy.
- root via Magisk v16 & Xposed 90.1-beta3 (systemless) works flawlessly
- the fp sensor always works, but it's not as sensitive as with stock
- night light worked - until I've installed Substratum and a Substratum theme, but after that it doesn't work anymore (even after deactivating, uninstalling the theme, a system restart and deinstalling the Substratum app it sill doesn't work). Also a dirty flash of the rom.zip didn't help to get it working again.
- the build-in camera takes acceptable pics (not as well as the stock camera, but acceptable); also focussing is a little slower than stock. Another thing is, it's not possible to chance the location to save the pics to the ext. sdcard.
- formatted as a portable storage, the ext. sdcard item on the left of the status bar can't be removed (see attachement)
- the battery consumption is a bit high (from 100 % to 98 % in 1 h - without doing anything)
But in the whole, it's really promising for th 1st official build :good::good::good:
Click to expand...
Click to collapse
Hello, is the battery life when used good ? As good as stock ?
And does it have that bug when if you record video the result will be green ?
Can you upload screen recording of rom from home to settings and other functions.
I plan on flashing this soon, but I figured I'd tell you, your link to the Carbon FAQ is broken.
ilininja said:
Hello, is the battery life when used good ? As good as stock ?
And does it have that bug when if you record video the result will be green ?
Click to expand...
Click to collapse
The battery consumption while in use is ok. But my device doesn't go into deepsleep while the screen is off. So I had lost about 23 % in 10 hrs - leaving the device untouched!
Video recording works; I haven't noticed that bug.
Saroj11488 said:
Can you upload screen recording of rom from home to settings and other functions.
Click to expand...
Click to collapse
Sorry, I went back to stock for now, as there's a new stock fw (41.3.A.2.107).
I have a few bugs to report. First, the fingerprint sensor is extremely slow, about half or even one third of the speed compared to stock. Second, could you guys please fix the deepsleep? That one is not working for now. And third, Night Light does not work at all...
Thank you for updating the XZ to Android 8.1 I am glad to see carbon rom on this device although it is not that stable for now.
Really nice ROM and I'm looking forward to make this my daily driver, I tried it for two days and these are the bugs I found:
1: GPU performance is really bad with 2d games and google maps lagging all the time when they never do on stock
2: CPU performance is inferior compared to stock, especially single threaded
3: enabling 120 hz display won't do anything and the settings or UI will crash when leaving the page
4: fingerprint seems to be sometimes less responsive, usable but can be improved
Camera is not so bad and the modded google camera works well, hopefully this will become the first proper AOSP based platform for this device that has only seen failures until now, keep up the good work.
Can I dirty flash this rom for just update?
I use Carbon Rom 3/31 version, but I can't use delta update because my device cannot receive the stock script.
I must change the rom script with Notepad+.
So...can I use dirty flash or....could you manage it?
Thanks for continously updating this rom and thank you for fixing the bug with the fingerprint sensor.
I'm not sure if deepsleep has been fixed but there is a big problem with playing music. I can't even play any music track at all...
Hello, looking forward to make this my daily driver, is it possible ?
What I would want is decent battery life and camera.
Hello. I tried to listen to music after installing the ROM, but the earphones are disconnected as soon as they are connected to the smartphone.
The earbuds pfe 132 and are made up of earphones with an iphone microphone.
L'ily said:
Clean flashed the 10th build along with Rytekk's dual-SIM patch, Pico Open GApps and Magisk 16.3 to my F8332 and other than that annoying SD notification (which can be banished to the notification drawer by making System UI notifications low priority) and Night Light not working, the only other major issue raised ITT of the CPUs not entering Deep Sleep is fixed according to Adiutor.
Great stuff. I haven't been able to standardise on one ROM since the CM days (interesting side note, it looks like you built the kernel for the NOCT build on my Z2 tablet).
I recommend this to anyone for daily use. Also, lower your expectations to realistic levels guise. I remember when XDA threads were for flagging major broken functionality, not complaining that a few amateur enthusiasts weren't putting out work that competed on every indicator against the finished product of a multibillion-dollar for-profit international conglomerate.
Sent from my Sony Xperia XZ using XDA Labs
Click to expand...
Click to collapse
Could you please give a link to that dual SIM patch?I have flashed this ROM on my F8332 successfully but none of my SIM cards works
Hello, with the 10th build I have a problem with the installation, it keeps telling me that Google services framework stopped.
Any help ?
(V11 vendor image odm, formated data)
BigMixman said:
Could you please give a link to that dual SIM patch?I have flashed this ROM on my F8332 successfully but none of my SIM cards works
Click to expand...
Click to collapse
Add these lines in build.prop, and reboot.
Code:
persist.multisim.config=dsds
persist.radio.multisim.config=dsds
ro.telephony.default_network=9,0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
LineageOS, an open-source Android distribution, is available for several devices,
with more being continuously added thanks to the biggest, yet ever growing, Android open-source community.
Join us and breathe new life in your device, be it old or new.
Click to expand...
Click to collapse
If you don't know LineageOS and would like to read about it before installing it you can take a look at the official Website.
Features
Individuality
Customization is paramount to productivity.
That’s why LineageOS promises to push for user personalization and preference.
Everyone is unique and your device should be too.
Click to expand...
Click to collapse
Security
Your data, your rules. With powerful tools such as Privacy Guard, you are in control of what your apps can do whenever you want.
Trust will help you understand the security of your device and warn you about possible threats.
We take security very seriously: that’s why we deliver security updates every month to all our supported devices.
And to make your device more secure, lock everything behind an enhanced lock screen.
Click to expand...
Click to collapse
Longevity
LineageOS extends the functionality and lifespan of mobile devices from more than 20 different manufacturers thanks to our open-source community of contributors from all around the world.
Click to expand...
Click to collapse
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Download LineageOS 17.1 for Xpeira Z2.
Installation instructions
Prerequisites:
Unlocked Sony Xperia Z2
Fastboot drivers to install TWRP
Micro-USB Cable to connect your phone to your computer
Install:
Reboot to TWRP. *
Wipe cache, dalvik cache, data and system.
Format data to get rid of encryption.
Install ROM.
Install 10.0 Gapps for ARM. **
* recommended TWRP: Post #2
** optional
Update:
Get the latest build
Boot into TWRP
Flash the downloaded build
Reboot
Note: If you don't wipe system, backuptool will reapply your modifications that support addon.d, for example: GApps.
Reporting bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
XDA:DevDB Information
LineageOS 17.1 for sirius, ROM for the Sony Xperia Z2
Contributors
NeoArian
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 23.5.A.1.291
Version Information
Status: Stable
Created 2020-02-21
Last Updated 2020-07-30
Known Issues
FM Radio quality is worse then on stock, bit we can't do much without Sony's source probably. I am not working on that right now.
Disk Encryption: Disk Encryption is working, however not with the default password (no password). Workaround: Set password first, then start disk encryption, not the other way round!
You tell (with logs please)...
TWRP
Download TWRP 3.3.1 for Xperia Z2!
How to install this TWRP
Rename the downloaded twrp image to twrp.img
Reboot to fastboot by holding volume up while connecting your device to your computer
Open a terminal and go to the directory with TWRP in it
Type
Code:
fastboot flash recovery twrp.img
Boot into TWRP; while the device is powered off press the power and volume down button
A big THANK YOU to @OLDST4R for donating the Xperia Z2 to me!
No problem.
Proud to do it again.
Long live our Z2, and of course thanks to you @NeoArian for your enthusiasm.
See you in Z3 thread.
Greetz,
0LDST4R
This is Intresting That Xperia Z2 is Still Alive xd
Stupid question :3
Is this rom at its current state usable for daily use ?
blacknight153 said:
Is this rom at its current state usable for daily use ?
Click to expand...
Click to collapse
Sometimes it helps to read what the OP wrote and make a judgement yourself. Sometimes...
Sent from my Galaxy Tab S5e using XDA Labs
guhvanoh said:
Sometimes it helps to read what the OP wrote and make a judgement yourself. Sometimes...
Click to expand...
Click to collapse
That's why I am asking I can't decide whether I flash it or not
I'm currently on aex rom pie. How do I install it? Do I need to go back to stock mm? Or I can just wipe system, data, dalvik and then install the rom.?
Delay and very slow response, sometimes auto restart
AnhAnNg said:
Delay and very slow response, sometimes auto restart
Click to expand...
Click to collapse
Yes, there seems to be a problem with the second build. I will take a look soon.
-- problem found! Will push a hotfix asap.
I very happy to see our phone live again. Thank you for work in z2 i try it soon
Thank you @OLDST4R for preparing new Android version to our device and thank you to @NeoArian for build this rom
devilgloom said:
I very happy to see our phone live again. Thank you for work in z2 i try it soon
Thank you @OLDST4R for preparing new Android version to our device and thank you to @NeoArian for build this rom
Click to expand...
Click to collapse
I only spent a device to @NeoArian, i did'nt prepared anything...
Credits must go to @NeoArian and all the other devs, rom cooks and testers in the past and now, in Shinano family, like @Myself5, @drakonizer, @rcstar6696, @okij - there are many, many more. Simply be grateful, respect their work, and be happy with new software for our devices.
Greetz,
0LDST4R
AnhAnNg said:
Delay and very slow response, sometimes auto restart
Click to expand...
Click to collapse
Problem is fixed, new build is uploading. If someone cares: The problem was because of a mismatching dalvik heap configuration which caused the phone to slow down incredibly.
Sorry for the bad start
Download: https://osdn.net/projects/ephedrace.../lineage-17.1-20200223-UNOFFICIAL-sirius.zip/
It would be great if someone can confirm that RIL (SIM, Telephony, SMS, Mobile data) works fine because the SIM slot is physically broken on my Z2.
Happy flashing and have a nice day!
0LDST4R said:
I only spent a device to @NeoArian, i did'nt prepared anything...
Credits must go to @NeoArian and all the other devs, rom cooks and testers in the past and now, in Shinano family, like @Myself5, @drakonizer, @rcstar6696, @okij - there are many, many more. Simply be grateful, respect their work, and be happy with new software for our devices.
Greetz,
0LDST4R
Click to expand...
Click to collapse
Thank you for your great personality,I have great respect for you.
---------- Post added at 01:07 PM ---------- Previous post was at 01:03 PM ----------
NeoArian said:
Problem is fixed, new build is uploading. If someone cares: The problem was because of a mismatching dalvik heap configuration which caused the phone to slow down incredibly.
Sorry for the bad start
Download: https://osdn.net/projects/ephedrace.../lineage-17.1-20200223-UNOFFICIAL-sirius.zip/
It would be great if someone can confirm that RIL (SIM, Telephony, SMS, Mobile data) works fine because the SIM slot is physically broken on my Z2.
Happy flashing and have a nice day!
Click to expand...
Click to collapse
You not bad start you start something awesome i go to flash new build and i check RIL and feedback here
Hey again
I'm test RIL and that works perfect I test SMS and telephony and I sent this feedback with mobile data all RIL that work perfect thank you.
Edit: I'm call with headset and that work now I test without headset and find a bug speaker and microphone both not working without that.
Does anyone know if the camera, camera hardware button, video streaming works?
devilgloom said:
Hey again
I'm test RIL and that works perfect I test SMS and telephony and I sent this feedback with mobile data all RIL that work perfect thank you.
Edit: I'm call with headset and that work now I test without headset and find a bug speaker and microphone both not working without that.
Click to expand...
Click to collapse
Great to hear. Can you please describe that Bug more Detailed? I don't understand it.
psi78 said:
Does anyone know if the camera, camera hardware button, video streaming works?
Click to expand...
Click to collapse
The camera and the camera Button Work. What do you mean by Video Stream?
NeoArian said:
Great to hear. Can you please describe that Bug more Detailed? I don't understand it.
The camera and the camera Button Work. What do you mean by Video Stream?
Click to expand...
Click to collapse
Good to hear, great work!
With video streaming i meant playing flash videos in a browser on various websites other than youtube (that was broken for me on another device using Lineage OS 14.1).
psi78 said:
Good to hear, great work!
With video streaming i meant playing flash videos in a browser on various websites other than youtube (that was broken for me on another device using Lineage OS 14.1).
Click to expand...
Click to collapse
Video streaming works fine on tagesschau.de and in the netflix app.
@kitokit said:
I'm currently on aex rom pie. How do I install it? Do I need to go back to stock mm? Or I can just wipe system, data, dalvik and then install the rom.?
Click to expand...
Click to collapse
Clean install or can dirty flash on top of aex rom pie? Need advice