Hi guys i Made a BIG MISTAKE
when I try to flash a new rom, I dont watch the level of battery, so the z3c go off.. when the new rom is installing..
I charge my cellphone, and when I try to erase the old data, knowing it would do some sort of messup, I find the following errors
any resolution?
Hey, no problem: I knew that bug also very good! How to fix it? Okay version one:
1. Flash your system
2. Wipe explicit the cache or format it as ext4 - if that fails, it is ok goto the next step
3. Reboot to recovery
4. Wipe it again // format is as ext4 - it should take a while and then fail
5. Boot your system up, this will take a lot of time. Give it for the first startup around ten minutes!
6. Voilá
If the problem persists: Write here!
Simonmicro
Related
I am frustrated that everytime an new release is out gotta reprogram my phone.
rm -rf /system/sd/*
search
sillyshyme said:
I am frustrated that everytime an new release is out gotta reprogram my phone.
Click to expand...
Click to collapse
Wiping your ext should not be an issue unless you're using Drizzy's "builds". If you're switching ROMs then you will have to wipe - get over it, but there should be "no wipe" updates when updating the a new version of the same ROM.
sillyshyme said:
I am frustrated that everytime an new release is out gotta reprogram my phone.
Click to expand...
Click to collapse
so i just noticed you had 27 posts, and im pretty sure all 27 have been about not wanting to wipe when switching roms, or complaining that you keep getting a boot loop. its just the dirty truth, if you wanna avoid a bootloop follow the info in the thread in my signature. if you dont wanna wipe, then dont switch, plain and simple.
SEARCH!!!!
palosjr said:
so i just noticed you had 27 posts, and im pretty sure all 27 have been about not wanting to wipe when switching roms, or complaining that you keep getting a boot loop. its just the dirty truth, if you wanna avoid a bootloop follow the info in the thread in my signature. if you dont wanna wipe, then dont switch, plain and simple.
SEARCH!!!!
Click to expand...
Click to collapse
Oh snap tellin it like it is..
I feel nice today, you're in luck, but this is the only post I'm writing to explain this procedure to you:
1. Reboot into recovery (Home + Power)
2. Backup NANDROID (or switchrom if you know how)
3. Enter into the console (alt+x)
4.
Code:
mount /system/sd
rm -rf /system/sd/app_s
rm -rf /system/sd/dalvik-cache
5.
Code:
ums_enable
6. Go into sdcard thru windows or whatever and then grab the data.img from the nandroid folder or switchrom folder depending on which one you used and place it in the same folder as fastboot (Go search if you don't know how)
7.
Code:
ums_disable
8.
Code:
recovery
9. Repair Filesystems (alt+f) (I think...)
10. Wipe data (alt+w)
11. Flash ROM of choice. (I've done this with practically every Hero flavor out there, should be no problem unless you cut corners in my directions some where... shame on you...)
12. Reboot phone when it finishes.
13. Wait for phone to get to setup page. Then, once there, reboot your phone again, but this time into bootloader (Camera + Power). You must wait for it to load the setup or this won't work.
14. Once fastboot is connected to the phone and can detect it (From connected PC):
Code:
fastboot flash userdata data.img
fastboot reboot
15. Wait for phone to boot up.... and bam, all wallpapers, lockscreen, program settings, mms, sms, contacts, etc. are already set up and your old settings + new ROM is ready to rock.
whenever i go into recovery mode i get an error on the bottom of the screem
BUILD : RA-dream-v1.7.0
E:Error in CACHE:recovery/log
(No Space left on device)
i cant nand backup or anything
rickyiswhite said:
whenever i go into recovery mode i get an error on the bottom of the screem
BUILD : RA-dream-v1.7.0
E:Error in CACHE:recovery/log
(No Space left on device)
i cant nand backup or anything
Click to expand...
Click to collapse
There are two possibilities:
1) The log is occupiing really the whole space on cache. In that case try to remove the log file from cache directory
2) Did you mess up with custom partion tables? To me this happened some time ago when I forgot to flash fr_boot_xxx.zip onto a boot.img while having installed custom partitions. In that case you have to clean everything. Eventually you need also to flash recovery again. If you have a recent backup, you can try to do a
fastboot erase system -w
then boot into recovery and see, if everything works for you again. If not you need to flash a new recovery:
fastboot flash recovery recovery.img
After that everything should work again, i.e. you can install your backup or you can install a new ROM.
AndDiSa said:
There are two possibilities:
1) The log is occupiing really the whole space on cache. In that case try to remove the log file from cache directory
2) Did you mess up with custom partion tables? To me this happened some time ago when I forgot to flash fr_boot_xxx.zip onto a boot.img while having installed custom partitions. In that case you have to clean everything. Eventually you need also to flash recovery again. If you have a recent backup, you can try to do a
fastboot erase system -w
then boot into recovery and see, if everything works for you again. If not you need to flash a new recovery:
fastboot flash recovery recovery.img
After that everything should work again, i.e. you can install your backup or you can install a new ROM.
Click to expand...
Click to collapse
hmm ok ill try that... thanks... and sometimes it says cant open cache or something
PLEASE HELP ME
I changed the battery of my Samsung and my phone got stuck on boot Modus. it shows the Samsung logo and then again the blue Rotation Samsung (whatever that is, i think every Samsung Shows it)
So it just keeps switching from one Samsung logo to another. I have installed SuperBean ROM Version from zai89 and havent done a backup lately. do you know what i could do now without losing all my data? I don't know my kernal Version and am desperate as hell..
I have been reading threw some Threads and read that I should Mount internal storage in recovery and copy all my files off. How exactly do I do that?
After that someone said full wipe and flash new ROM with Odin. But is that even possible if I don't know my Kernal Version?
As you can read I'm a noob, please explain step by step. I'm thankful for every answer!
First, try to boot into recovery. Then wipe cache and wipe dalvik cache. If the phone boots up again, everything is fine, if not tell us and we will give you further instructions.
G4liant said:
First, try to boot into recovery. Then wipe cache and wipe dalvik cache. If the phone boots up again, everything is fine, if not tell us and we will give you further instructions.
Click to expand...
Click to collapse
It's still stuck
Install adb drivers if you don't already.
Boot into recovery and and connect phone to pc.
Go to mounts and storage menu and unmount cache and data.
Open command prompt on pc a type adb shell. You should see a # symbol.
Then type
e2fsck -f -c -y /dev/block/mmcblk0p10
Once this is done, Wipe cache and dalvik and reboot. It. Might do a lot of things, wait till you get the # prompt back.
Dear friends I need help!
I've tried to flash my tablet but I've got an error message while flashing Katkiss 6.0
What I did:
downloaded Rom.(md5sum is OK)
my bootloader is ww_epad-11.4.1.17-20140711
recovery CWM v6.0.5.0
previous rom zoombi pop
/format data
wipe data factory reset
install zip from sd card. (from internal storage or micro sd card)
And I have got the following error (in attachement)
Please help, my tablet boot only recovery now.
Thanks in advance for the help
trying to boot in fastboot mode when children let me try that...
Edit: fastboot ok.
I placed the the files
KatKiss-6.0_TF701T_033.zip
open_gapps-arm-6.0-pico-20170120.zip
UPDATE-SuperSU-v2.79-20161211114519.zip
In
C:\Program Files (x86)\Minimal ADB and Fastboot
ok I don't know how to proceed now.
Seems I cannot change the recovery from CMW to TWRP,
My bootloader is 11.4.1.17 and the tutorial to install TWRP says in capital red:
MUST BE ON A BOOTLOADER 11.4.1.27, 11.4.1.29 or 11.4.1.30
So how can I do?
I there a way to upgrade the bootloader to be able to install TWRP?
Or should I Flash the custom rom from fastboot?
My TF701 in not booting anymore.... only bootloader and recovery CMW
the positive thing is :
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
15C3E10090400000011FA8580 fastboot
Please help
I have been able to flash CROMI X (unfortunately with strong battery drain) so CMW is able to flash but for some reasons not Katkiss 6.0.
I have been told that my problem is not ROM related... So it is recovery related?
What is the better option to get katkiss on my tablet? Flash the recovery to get TWRP even if my bootloader is 11.4.1.17 and the tutorial to install TWRP says in capital red:
MUST BE ON A BOOTLOADER 11.4.1.27, 11.4.1.29 or 11.4.1.30????
There is a technical reason about this warning?
Edit: I found this on an old post:
You can try this:
Download the stock recovery from here: http://droidbasement.com/db-blog/?p=3210
Copy the image to your fastboot folder.
Download the Asus firmware, unzip the file once and copy it to your internal SD.
Boot tablet into fastboot
Issue this command
Code:
fastboot boot recovery.img
Note: Do not flash the recovery, just boot it.
It should recognize the firmware file on your tablet and flash it.
Click to expand...
Click to collapse
Would this method work to get the latest stock rom from Asus?
Got your PM and will try to find some time at work today. Hang in there and don't do anything to make it worse
Ok, work was crazy busy so it took a bit longer.
If you flash a recovery that is incompatible with the bootloader nothing happens. Until you use the recovery... That could permanently brick the tablet. So heed the warnings, they are there for a reason.
Ok, let's try to get you on the latest bootloader. It's no suprise at all that nothing boots if you try to flash a Android 6 rom on an Android 4 bootloader....
Download either WW or US package from here: https://forum.xda-developers.com/showpost.php?p=61045480&postcount=2
That zip contains the latest bootloader and a compatible TWRP recovery. Flash the zip in your current recovery just like any rom, then reboot.
When you flash a bootloader or recovery you actually write those files to the staging partition. On the next boot the bootloader will unpack it and write everything to it's proper place.
So it's essential that you flash, then reboot. Does not matter that the boot does not go anywhere. The first part, flashing the contents of /staging to it's partition(s), will happen anyway.
You should see a brief blue bar filling up when that happens. It does not take long.
Boot back into fastboot and check your bootloader version.
Enter recovery through RCK and that should be TWRP now.
Then format /data. Do not wipe it, format it. Do not interrupt it. Wait for it to finish even if it takes an hour (a full battery is a must before you start this). The format command is under the Wipe menu.
Unfortunately the formatting in this kanged TWRP is pretty buggy, but I still like it better than CWM.... If you get lots of error messages after the format (cannot mount this, cannot mount that) go into Wipe > Advanced > select Data > Change or repair file system > Change file system > choose ext3 and execute
Note: The button you have to swipe is pretty "sticky". Swipe it slowly and fully
Reboot to recovery
Go back into Wipe > Advanced etc and change the file system back to ext4
Reboot to recovery
Now everything should be ok, try to mount/unmount data.
Finally you are ready to flash Katkiss
If the bootloader flash does not work, we can try to flash Asus firmware in fastboot, but try the above first.
berndblb said:
Ok, work was crazy busy so it took a bit longer.
If you flash a recovery that is incompatible with the bootloader nothing happens. Until you use the recovery... That could permanently brick the tablet. So heed the warnings, they are there for a reason.
Ok, let's try to get you on the latest bootloader. It's no suprise at all that nothing boots if you try to flash a Android 6 rom on an Android 4 bootloader....
Download either WW or US package from here: https://forum.xda-developers.com/showpost.php?p=61045480&postcount=2
That zip contains the latest bootloader and a compatible TWRP recovery. Flash the zip in your current recovery just like any rom, then reboot.
When you flash a bootloader or recovery you actually write those files to the staging partition. On the next boot the bootloader will unpack it and write everything to it's proper place.
So it's essential that you flash, then reboot. Does not matter that the boot does not go anywhere. The first part, flashing the contents of /staging to it's partition(s), will happen anyway.
You should see a brief blue bar filling up when that happens. It does not take long.
Boot back into fastboot and check your bootloader version.
Enter recovery through RCK and that should be TWRP now.
Then format /data. Do not wipe it, format it. Do not interrupt it. Wait for it to finish even if it takes an hour (a full battery is a must before you start this). The format command is under the Wipe menu.
Unfortunately the formatting in this kanged TWRP is pretty buggy, but I still like it better than CWM.... If you get lots of error messages after the format (cannot mount this, cannot mount that) go into Wipe > Advanced > select Data > Change or repair file system > Change file system > choose ext3 and execute
Note: The button you have to swipe is pretty "sticky". Swipe it slowly and fully
Reboot to recovery
Go back into Wipe > Advanced etc and change the file system back to ext4
Reboot to recovery
Now everything should be ok, try to mount/unmount data.
Finally you are ready to flash Katkiss
If the bootloader flash does not work, we can try to flash Asus firmware in fastboot, but try the above first.
Click to expand...
Click to collapse
Thanks a lot to take time to help me.
Will try that tonight and I'll let you know the result.
Thanks a lot!
It was just like you said.
I had to format to ext3 and ext4 because I had errors.
Battery seems to be very good. Just the screen display is very white, needs color saturation and contrast I guess...
Thanks again you save my tablet.
Now that's what I like to read! :cyclops:
Getting Failed to clear BCB message: failed to open /dev/block/boot/device/by-name/misc: No such file or directory after phone crash
cant solve this please help
tried edl recovery flashed well but didnt solve problem
i have unlocked the bootloader and flashed many raw firmware didnt solved problem
flashed twrp sucessfully but cant mount storage intenal storage 0mb and cant swipe anything
get this message everytime in recovery
Getting Failed to clear BCB message: failed to open /dev/block/boot/device/by-name/misc: No such file or directory after phone crash
please help
I have no idea it helps, I had my phone crash on me and me trying my old-and-tried flashing etc. I did not have such BCB message, but it sounds like there is an issue with the partitions or partitioning.
There are nice YouTube videos at least that show how to flash the stock ROM (not giving link here for advertising etc).
it boils down to (FIRST get your data off the phone as you are going to lose this)
- TWRP being bootable
- in TWRP: factory reset, wipe data
- flash stock ROM twice: to partition A and after reboot to TWRP, to partition B. I do not know why this needs to be done, love to learn it by myself.
- flash without wiping a custom recovery if wanted.
- restore your data