Hi all:
This is a thread for my alternative LineageOS 14.1 roms for suzuran.
I'm building these roms from time to time for my own needs and I think other people should participate.
Since the "official" development of LineageOS 14.1 has been stopped, I decided to build a new version only if the Android security patch level has been changed or I've changed anything.
Download 2021-07-19
This is a 7z archive with the zip'ed rom and the md5 file in it. Please unpack this archive, copy the included two files somewhere to your device, reboot into TWRP and flash this zip file. Enable zip verification and md5sum checking. Maybe you have to rename the md5 file to *.md5sum; depending on the TWRP version you are using.
Kernel sources
Tree sources
Features:
OS Version: 7.1.2 Nougat
Kernel: Linux 3.10
New: Android security patch level: 5 June 2021
Using sony blob's from stock version 32.4.A.1.54
Important informations:
You should be familiar with general installation of custom roms.
Required for installation: TWRP 3.1.1 (or newer).
OR use my self built TWRP-version 3.5.2!
No need for making a clean install, but sometimes it helps a lot!
This rom is pre-rooted. For those who want to use magisk or any other rooting tool, you can easily remove this by flashing this file.
Use this rom at your own risk! It comes without any warranty! I'm not responsible for any damage! If you don't agree with that, don't try to flash this rom in any way.
Differences between my version and the "official" one:
Kcal Display Driver - Thanks to @GreyLeshy and @Sony user 16
Voltage Control - Thanks to @GreyLeshy and @Sony user 16
OMS-Support - Thanks to @nathanchance
Added F-Droid and UnifiedNLP! If you don't want this, simply de-install it.
I've included some little extensions like changelog and volume adjustment.
I've set maximum speaker volume to a higher value.
I've increased microphone gain.
I've increased all volume steps from 7 to 15.
I've changed the microfone gain to avoid echo in phone calls.
I've enabled data for MMS.
I've enabled MHL.
Not working:
VoLTE, VoWiFi
If you want to use encryption, you have to disable SIM PIN first!
One (last) request: Please don't ask for including any app. I won't do this, because I want to keep this rom as clean as possible.
Changelog
Troubleshooting:
If you're running into an error, please search in this thread if this error is already posted, before you post it again!
If not, I need a LOG to see what went wrong. Without a LOG I can't help you!
A LOG can be fetched by connecting the device with an USB cable to your PC and then by typing these commands line by line:
Code:
adb root
adb shell logcat -b all -d > logcat
Send my this LOG file via PM.
If you think this could be a SELinux related issue, please try to set the device to permissive mode first.
If the issue is gone, I need the policy file too (plus LOG). Fetch it by typing this line in a terminal:
Code:
adb pull /sys/fs/selinux/policy
If you stuck in a bootloop you can fetch a LOG with this trick:
Press the power button and the volume up button together until the device shuts down.
HOLD the power button.
Release the volume up button and press the volume down button immediately after releasing the volmue up button.
The device should start into TWRP recovery.
Tap on "Advanced", then on "Terminal" and enter these commands line by line:
Code:
cd sys/fs/pstore
cp * /sdcard
Send me the copied file(s), if any, via PM.
Nice
Berni-0815 said:
Hi @all:
First of all, please excuse my bad english... :angel:
They said I should create my own thread for my alternative LineageOS 14.1 roms for suzuran. Here it is.
I'm building these roms from time to time for my own needs and I think other people should participate.
Download
Kernel sources
Tree sources
OS Version: 7.1.2 Nougat
Kernel: Linux 3.10
Required for installation: TWRP 3.1.1
Important informations:
You should be familiar with general installation of alternative roms.
I've included some little extensions like changelog and volume adjustment.
There is no need to make a clean install, but sometimes it helps a lot!
Use it at your own risk!
Click to expand...
Click to collapse
Hi ! It would be great if u put out the advantage of yours vs with the official LOS
Berni i said before and i m saying again please make this topic a lineage based rom..
İnclude minimal app for google play store.
And maybe can add substratum inside.. or can be a default diffefent theme ..
I believe you can..
Thx bro.
ROBNX85 said:
Hi ! It would be great if u put out the advantage of yours vs with the official LOS
Click to expand...
Click to collapse
As I wrote: "I've included some little extensions like changelog and volume adjustment."
emosis said:
İnclude minimal app for google play store.
Click to expand...
Click to collapse
As I said a few days before: I don't want to include gapps! If somebody wants to use gapps, feel free to flash them separately. You can download them here. You need arm64 and 7.1 for suzuran.
And maybe can add substratum inside..
Click to expand...
Click to collapse
Substratum support is not longer available, because the devs have stopped their development for Nougat since august.
Berni-0815 said:
As I wrote: "I've included some little extensions like changelog and volume adjustment."
Click to expand...
Click to collapse
Add a basic ad-blocker too ?
Berni-0815 said:
As I said a few days before: I don't want to include gapps! If somebody wants to use gapps, feel free to flash them separately. You can download them here. You need arm64 and 7.1 for suzuran.
...
Click to expand...
Click to collapse
I agree gapps should not be included. It is easy enough to just flash it right after flashing the rom
I am thinking about official vs rom, I think the two roms are probably nearly identical. Probably the most important factor will be the frequency of updates.
PeppeBove said:
Add a basic ad-blocker too
Click to expand...
Click to collapse
You can use AdAway which is an open source host list based ad blocker. See https://adaway.org
PeppeBove said:
Add a basic ad-blocker too
Click to expand...
Click to collapse
I don't see a reason to bake something into the ROM when there are many apps that can do it.
I think something like Xposed-type tweaks being put into settings would be more appropriate. Alleviating the need for xposed. But I don't think it makes sense to load random apps into the ROM.
New version; please have a look at the first post
Berni-0815 said:
New version; please have a look at the first post
Click to expand...
Click to collapse
Awesome work, thank you so much! Flashing it now.
Just 1 question - do you know if encryption works on your builds?
I've never tried it. I've not so good experience with encryption on a stock rom; so I've decided not to use this feature at all!
Hi Bernhard.
Thanks for your hard work!
i have a question for you.... As i understand it you take all the changes/updates from the offifcial lienage and implement them into your own build. And add the changes as described in post 1.
Am i right about this?
I think that battery life is bad on the official compaired to the version you do.
Do you add battery improvements in your build?
Thanks in advance.
Torben 5247
torben5247 said:
Thanks for your hard work!
Click to expand...
Click to collapse
Oh, it is not so hard to do this, but, thank you! Sometimes I have to search a few hours or try (and revert) something, but in the end I've gotten everything to work as I like it to work.
As i understand it you take all the changes/updates from the offifcial lienage and implement them into your own build.
Click to expand...
Click to collapse
I'm using the LineageOS repositories from github as they are, that's right. I don't use my own repo's; nzzane is doing this AFAIK (Klick). A few weeks ago I'm using other repo's, because LineageOS had bad (will say: not working) sources for our devices.
And add the changes as described in post 1.
Am i right about this?
Click to expand...
Click to collapse
Yes! :good: One or two of my changes should be implemented into the "official" builds, but until now I don't understand how to use "commitments". Maybe in a few days... :angel:
I think that battery life is bad on the official compaired to the version you do.
Do you add battery improvements in your build?
Click to expand...
Click to collapse
No. Nothing like this.
On my own device battery life is about three days...
Hi,
PeppeBove said:
Add a basic ad-blocker too
Click to expand...
Click to collapse
emosis said:
İnclude minimal app for google play store.
And maybe can add substratum inside..
Click to expand...
Click to collapse
Like other persons, I don't want to have a lot of applications include in the rom. I want to choose the ones I use. This is one reason that made me come to alternative rom.
Another reason is that Lineage use less google s"hit" than stock rom.
So if you have the vision of more app and google stuff include, you better stay on stock. Alternative Roms offers me more freedom; but that's just my opinion...
This is prerooted? There are some of us out there that need to install certain apps before rooting.
Cerhio said:
This is prerooted?
Click to expand...
Click to collapse
Yes.
Berni-0815 said:
One or two of my changes should be implemented into the "official" builds, but until now I don't understand how to use "commitments".
Click to expand...
Click to collapse
I've just committed three of my changes. We'll see if they will be merged...
Berni-0815 said:
I've just committed three of my changes. We'll see if they will be merged...
Click to expand...
Click to collapse
The brightness settings? I hope so
What else?
Berni-0815 said:
I've just committed three of my changes. We'll see if they will be merged...
Click to expand...
Click to collapse
That's so great to hear, let's hope they get accepted.
Huge thank you for keeping this device alive Berni!
Related
Guys,
Seems like there are lots of threads popping up with new 'packages'. I thought we should create a thread solely for the discussion of kernel hacks/patches so that we can separate the two:
For those of you who dont know, http://gitorious.org/linux-on-qualcomm-s-msm/linux-msm-xdadev is the repo were are working on.
Just to clarify, this topic is ONLY for discussion regarding Kernel patches. Thanks to vdelf's headset patch it seems sensible to focus on:
1. Backlight always on problem FIXED 01/05/10 (vdelf)
2. Battery Issue FIXED 11/05/10 (drlucky)
3. Camera
4. USB
5. GPS
Makes sense. Lets add USB to the list. While charging works, data transfer does not. Also USB might allow us to debug kernel/android on the x1 and that is what dev's always dream of
:suggestion: why not add the latest kernel as download in the 1st post if there is progress. So everyone know where to download the latest updates u ppl do
dexteral said:
:suggestion: why not add the latest kernel as download in the 1st post if there is progress. So everyone know where to download the latest updates u ppl do
Click to expand...
Click to collapse
It will be great to do this, and stick it
@dexteral,
Anyone can checkout the kernel from the above repo I posted. To do what you require we would need to upload the Kernel everytime someone adds a patch...
vdelf said:
Makes sense. Lets add USB to the list. While charging works, data transfer does not. Also USB might allow us to debug kernel/android on the x1 and that is what dev's always dream of
Click to expand...
Click to collapse
Is data transfer even possible in haret? I mean how would system unmount sdcard if it's running from sdcard itself?
not fast data but normal will work
love it
vietdoan20062006
Hi, Lets add fm-radio to the list
Great idea ... otherwise we are creating such a mess with lots of different kernel versions in different threads.
If anyone is interested in compiling the kernel as well as the wifi modules, I have setup a VMWare debian appliance containing all necessary tools and scripts to compile everything. Since this is a few hundes MB, I haven't got a place to upload ... need to check this first. If you are interested, let me know.
@drlucky
Have you had a chance to look at the backlight issue? I am almost out of ideas
Can you post your modifications on the microp-module and what you found out until now?
_Sensible said:
Guys,
Seems like there are lots of threads popping up with new 'packages'. I thought we should create a thread solely for the discussion of kernel hacks/patches so that we can separate the two:
For those of you who dont know, http://gitorious.org/linux-on-qualcomm-s-msm/linux-msm-xdadev is the repo were are working on.
Just to clarify, this topic is ONLY for discussion regarding Kernel patches. Thanks to vdelf's headset patch it seems sensible to focus on:
1. Backlight always on problem
2. Battery Issue
3. Camera
4. USB
5. GPS
Click to expand...
Click to collapse
hey could you post the steps involved for compiling the kernel i am able to comile the kernel but it is not running
Wich toolchain do you use? arm-2008q1 or arm-2009q3?
X1iser said:
Wich toolchain do you use? arm-2008q1 or arm-2009q3?
Click to expand...
Click to collapse
arm-2010q1
could u write all the commands used by you
the way i have written
Personally I'll start to see how to compile the kernel. Can you share the link to download arm-2010q1?
Have you read this post ?
X1iser said:
Personally I'll start to see how to compile the kernel. Can you share the link to download arm-2010q1?
Have you read this post ?
Click to expand...
Click to collapse
http://www.codesourcery.com/downloa...-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
but may be it is not the right one it has got 202 in it insted of 67
ya i read that post only
i was able to compile the kernel but it is giving some errors
_Sensible said:
@drlucky
Have you had a chance to look at the backlight issue? I am almost out of ideas
Click to expand...
Click to collapse
Sorry, haven't had the time. Could you push your changes to the git repo, I will try to have a look at it this week ...
okay i tried to make the kernel bt following the guide above by fatsal...
but i got stuck at
make htckovsky_defconfig ARCH=arm
htckovsky_defconfig doesn't exist (in the new repo anyway, i believe)
any help? which defconfig to use? :S
drlucky said:
Sorry, haven't had the time. Could you push your changes to the git repo, I will try to have a look at it this week ...
Click to expand...
Click to collapse
Just played with the klt-driver a bit. I always get version 0x0000, which on a hero means "bootloader mode". I have tried to migrate the hero code, but with no luck. It seems that the microp-klt needs a "reset", which shoudl be done by using a magical GPIO (on hero: 76), but this doesn't currently work at all. Kernel boots up, but still gets no valuable version number.
Hello,
Developers, I really need help to get the ubuntu-touch port working again!
After the first release of Ubuntu-Touh I tried to port it again to our devices, but I don't get them booting. I only get a black screen. I have updated all sources on github and made the appropriate changes. You can find all relevant sources and information on my new website http://danwin.github.io/ubuntu-touch.html where I have uploaded the non-bootng builds for developers.
I still have the old builds available for those, who want a booting ubuntu-touch, but without any functionality: http://danwin.github.io/ubuntu-touch.html
it is so laggy on mini Dude :/
screenshot please
rod555 said:
screenshot please
Click to expand...
Click to collapse
there is already a video available, but I have made some Photos of my Neo V, sorry for bad quality: http://ubuntuone.com/6keWFpFBG0kEsVF7mBF54D
Can you add the screenshots in the op as pic
slimmer2 said:
Can you add the screenshots in the op as pic
Click to expand...
Click to collapse
I don't think this is really necessary, as I have a video from kakalko4 embedded there, which has a lot better quality than my screenshots. You can download the zip provided above and unzip the pictures inside, if you really want to see them.
can you make a more understandable guide how to install it because i try to follow your guide and my phone boots to kernel logo and for couple of second phone turns off
MarioJerkovic said:
can you make a more understandable guide how to install it because i try to follow your guide and my phone boots to kernel logo and for couple of second phone turns off
Click to expand...
Click to collapse
ok, updated.
You have to created an ext4 partition with CWM of another kernel or Linux and flashed then my kernel to use the ext4 partition on your SD-Card as /data, because ubuntu is to big for the internal storage. Have you really done that step?
DanWin1210 said:
ok, updated.
You have to created an ext4 partition with CWM of another kernel or Linux and flashed then my kernel to use the ext4 partition on your SD-Card as /data, because ubuntu is to big for the internal storage. Have you really done that step?
Click to expand...
Click to collapse
Yep done it and working ubuntu is working it lags a lot :/ but i dont care i am happy that we got Ubuntu on our old devices
I take it this a the same one as we already have? (crappy demo with no gsm)
replicant101 said:
I take it this a the same one as we already have? (crappy demo with no gsm)
Click to expand...
Click to collapse
For now yes, but hopefully officiallysonyrebel can make the kernel patches in one or two days available, so I can rebuild all images to make the daily builds of ubuntu booting, which have a lot of improvements.
Kernel patches related to what? I can help out. And I remember officiallysontrebel saying that he doesnt know much about kernels on the ray thread that was removed.
emwno said:
Kernel patches related to what? I can help out. And I remember officiallysontrebel saying that he doesnt know much about kernels on the ray thread that was removed.
Click to expand...
Click to collapse
The daily images of ubuntu aren't booting and officiallysonyrebel said that this is related to some kernel patches that have to be made, you can PM him and ask if you can help him with patching, so we can make the daily images also booting, which have a lot improvements in stability and usability.
DanWin1210 said:
The daily images of ubuntu aren't booting and officiallysonyrebel said that this is related to some kernel patches that have to be made, you can PM him and ask if you can help him with patching, so we can make the daily images also booting, which have a lot improvements in stability and usability.
Click to expand...
Click to collapse
thats strange.... It cant be kernel related, if you had added the new configs to the source code. It could be with the lastest CM10.1 changes for the 2011 devices. Take a look at http://github.com/cm42semc , here you will find the latest commits. I say this because if there was a problem with the Ubuntu Images, i.e something new needed to be added to get the build to boot, then it wouldn't boot on my n7100 either (as i made the same changes as prescribed on the guide). Either way its just a hunch. Give it a go.
With kernel patches, can performance be addressed?
emwno said:
thats strange.... It cant be kernel related, if you had added the new configs to the source code. It could be with the lastest CM10.1 changes for the 2011 devices. Take a look at http://github.com/cm42semc , here you will find the latest commits. I say this because if there was a problem with the Ubuntu Images, i.e something new needed to be added to get the build to boot, then it wouldn't boot on my n7100 either (as i made the same changes as prescribed on the guide). Either way its just a hunch. Give it a go.
Click to expand...
Click to collapse
I'm already using these sources and the daily images only get a black screen. A lot of other people report the same issue for their devices (not Xperia), too. You can have a lock at my changes on https://github.com/DanWin and maybe you find the mistake I made, if I made any.
replicant101 said:
With kernel patches, can performance be addressed?
Click to expand...
Click to collapse
Maybe, but the daily builds of ubuntu have a lot better performance and stability than the mwc-demo image, which is currently the only booting version.
DanWin1210 said:
I'm already using these sources and the daily images only get a black screen. A lot of other people report the same issue for their devices (not Xperia), too. You can have a lock at my changes on https://github.com/DanWin and maybe you find the mistake I made, if I made any.
Click to expand...
Click to collapse
Yes, others did have a blackscreen, even the n7100 users did. But some, including myself got it to boot.
This is what I did:
1. Wipe system / data / dalvik
2. install device part
3. install ubuntu image
NOTE: You made a new partition on the sdcard where ubuntu was to be installed. I recommend you to WIpe your sdcard, create a new partition and try again. Also try with try flashing with a different recovery / kernel then flashing the ubuntu kenrel in the end. Sometimes recoveries mess up.
Thx for the job but i had some problemes with the ARc S when i flash the Ubuntu systeme it's abortes whith the statu 0 what i have to do ?
d4k-pho3nix said:
Thx for the job but i had some problemes with the ARc S when i flash the Ubuntu systeme it's abortes whith the statu 0 what i have to do ?
Click to expand...
Click to collapse
Normally status 0 means success, can you go in CWM to advanced -> show log and enter the output of this here, maybe I can help you.
FEEL FREE TO DONATE US FOR ALL WE'RE DOING FOR YOU!
For general discussions, bug reports and FAQ, write HERE!
Credits:
MoltenMotherBoard team!
Downloads:
TWRP Recovery | Code.Google
Full sources:
MoltenMotherBoard sources: MoltenMotherBoard | Github
CyanogenMod sources: CyanogenMod | Github
Kernel: lge-kernel-p880 | Github
Changelog:
20131126
Fixed partition table
Code updates from TWRP, Google
20131120
First release
Issues:
Do you want to report an issue? Do it here!
In order to do it, create a new issue, choosing correct labels corrisponding to: Device/OS which you're using, ROM/project you're on, kind of issue.
Also, please, be sure you're running the ROM/project in the exact way we've provided it to you (do not create issues if you're using different
kernel, mod, plugins and dependencies we didn't tell to use).
General Questions: MoltenMotherBoard Projects | General Questions and Info
Official Mantainer(s): Mackief, ItachiSama, p4c0
Installation guide:
[Method 1° ~ fastboot]
Code:
$ adb reboot oem-unlock
$ fastboot flash recovery /PATH-TO-THE-IMG-FOLDER-ON-YOUR-COMPUTER/twrp.img
$ fastboot reboot
[Method 2° ~ adb] (put the recovery.img in your sdcard)
Code:
$ adb shell
$ su
# cat /sdcard/twrp.img > /dev/block/mmcblk0p1
# sync
# exit
$ exit
---------- Post added at 09:44 PM ---------- Previous post was at 09:43 PM ----------
I know you already have a 2.6.3.0 TWRP recovery, but it's based on 4.4 OMNI Android source code, and it's still in work-in-progress. This means, I'll keep it up-to-date with mainline sources.
Anyway, it would be appreciated if you report bugs here, so that I can check them!
"I know you already have a 2.6.3.0 TWRP recovery, but it's based on 4.4 OMNI Android source code, and it's still in work-in-progress. This means, I'll keep it up-to-date with mainline sources."
what does it mean ? Is 4.4 OMNI Android source code bad ? What did you use ? Whay is it better for us ?
EB20XY said:
"I know you already have a 2.6.3.0 TWRP recovery, but it's based on 4.4 OMNI Android source code, and it's still in work-in-progress. This means, I'll keep it up-to-date with mainline sources."
what does it mean ? Is 4.4 OMNI Android source code bad ? What did you use ? Whay is it better for us ?
Click to expand...
Click to collapse
It means it this versions supports Android4.4-based roms flashing.
It also means that it will be updated by the team.
Obviously, the team is doing a great work, why shouldn't it have done it?
Error or not? I wanted to make a backup copy of a recovery, and it turned out that there is no choice where to save it! Neither the internal memory card or an external card!
negativman said:
Error or not? I wanted to make a backup copy of a recovery, and it turned out that there is no choice where to save it! Neither the internal memory card or an external card!
Click to expand...
Click to collapse
Don't understand. What are you meaning?
mackief said:
Don't understand. What are you meaning?
Click to expand...
Click to collapse
I go into recovery, make a backup copy. Click "Backup", in the center of a blank window, and there is nowhere to select the item to save a backup (internal or external sdcard).
negativman said:
I go into recovery, make a backup copy. Click "Backup", in the center of a blank window, and there is nowhere to select the item to save a backup (internal or external sdcard).
Click to expand...
Click to collapse
OK. I'll check!
Think it's almost important for you to read this post: http://forum.xda-developers.com/showpost.php?p=47827005&postcount=11
mackief said:
It means it this versions supports Android4.4-based roms flashing.
It also means that it will be updated by the team.
Obviously, the team is doing a great work, why shouldn't it have done it?
Click to expand...
Click to collapse
what is exactly is the difference for kitkat ? Are the partitions different ?
EB20XY said:
what is exactly is the difference for kitkat ? Are the partitions different ?
Click to expand...
Click to collapse
Nope. At recovery-level, the biggest differencies are in the binary commands, then in Edify scripts.
Nothing relevant, but if you wanna flash a KitKat rom, you HAVE to use a 'KitKat' recovery!
mackief said:
Think it's almost important for you to read this post: http://forum.xda-developers.com/showpost.php?p=47827005&postcount=11
Click to expand...
Click to collapse
And where can I download it? Discovered the mistake about which I spoke to you?
negativman said:
And where can I download it? Discovered the mistake about which I spoke to you?
Click to expand...
Click to collapse
It should be a still-working-on broken feature by team.
It's a early recovery port, as the team is still making its own modifies on 4.4 code.
BTW, today I should release newer build
negativman said:
And where can I download it? Discovered the mistake about which I spoke to you?
Click to expand...
Click to collapse
Ok, I was wrong. That's an issue caused by the fact that TWRP doesn't support fstab v2 - the partition table - and, as our device tree is using this version of table, TWRP didn't load our partition and couldn't backup anything.
Just released new build of CWM.
Changelog:
Fixed partition table
Code updates from TWRP, Google
Follow us on Google+, Facebook & Twitter!
Cheers.
I have a few questions. They apply both to this and CWM.
Why have another build of both recoveries? I still understand TWRP, but @laufersteppenwolf has a released touch version of CWM. Why would anyone use a non-touch version?
The above doesn't apply if these builds have something special. If there is any, update the OP with the features list.
If #2 applies, you should share your sources.
Restore commit history as soon as you can here and in other device folder repos. Original creators deserve the credit. Also, rename the branch from cm9, it's misleading. If somebody tried to build CM9 with that branch, they surely couldn't.
What flags do you use for building TWRP? I don't see any in BoardConfig.mk.
What kernel sources do you use? Even if you didn't change anything in kernel source, put a link to the source you used in the OP.
Adam77Root said:
I have a few questions. They apply both to this and CWM.
Why have another build of both recoveries? I still understand TWRP, but @laufersteppenwolf has a released touch version of CWM. Why would anyone use a non-touch version?
The above doesn't apply if these builds have something special. If there is any, update the OP with the features list.
If #2 applies, you should share your sources.
Restore commit history as soon as you can here and in other device folder repos. Original creators deserve the credit. Also, rename the branch from cm9, it's misleading. If somebody tried to build CM9 with that branch, they surely couldn't.
What flags do you use for building TWRP? I don't see any in BoardConfig.mk.
What kernel sources do you use? Even if you didn't change anything in kernel source, put a link to the source you used in the OP.
Click to expand...
Click to collapse
Actually, they're based on 4.4 . No new features, nothing new.
Then, my device tree with CM9 has nothing to do with these recoveries; of course I'll add kernel sources and so on.
---------- Post added at 08:57 PM ---------- Previous post was at 08:46 PM ----------
Just updated OP and sources. Thanks for the report.
@Adam77Root is right, posting 2 equal projects is not only useless, but it could also be counted as spamming the forum (please don't get me wrong, it's the mod in me speaking ATM, not the person )
If you want to, I can give you access to my thread so we both can use it. I guess that'd be a win-win situation for everyone then
So, what do you say?
laufersteppenwolf said:
@Adam77Root is right, posting 2 equal projects is not only useless, but it could also be counted as spamming the forum (please don't get me wrong, it's the mod in me speaking ATM, not the person )
If you want to, I can give you access to my thread so we both can use it. I guess that'd be a win-win situation for everyone then
So, what do you say?
Click to expand...
Click to collapse
Nope, don't worry! If you think it's a problem, don't worry. Close my doubled threads! It's not a problem!
mackief said:
Nope, don't worry! If you think it's a problem, don't worry. Close my doubled threads! It's not a problem!
Click to expand...
Click to collapse
You know, that's exactly the problem/difficulty of being a mod in his own section
I personally do not have a problem with it, but if someone wants to, he can see it as spamming, which could get you in trouble some time.
So I usually try to avoid such situations as soon as possible
So all in all it's your call. I have no problem giving you access to my thread, so we both can keep on deving on it, but it would be less work for both of us if we'd share it. (which I actually could use ATM )
So you tell me what you want to do
Here is my build of lollipop for the T800. it's useable in so far as being able to see what it's like.
It has been posted in here because it is not ready for prime time and I figured others might want to have a look. It has bugs and doesn't fully work so might not be suitable for daily use, but you decide
How to Install
Download zip to phone
Reboot to recovery
Flash CM12 zip
Flash gapps
Reboot
The first reboot may take a while so be patient.
Known Issues
Some slight graphical issues
Camera gives an error after each picture, just reopen to use use again.
Hardware keys aren't disabled if you use on-screen keys (but they are dimmed)
Video/Movies/Youtube won't play
Download Link
lonespeaker version (10th Dec) -- https://mega.co.nz/#!4ckg0BwB!AhpucIfXJ6P-Y1z7mxQgKkWzHVg4dEhkwiVEUvM3gyA
barracuda7 version -- http://forum.xda-developers.com/showpost.php?p=57300243&postcount=22
You can use any gapps but I use these ones -- https://s.basketbuild.com/gapps
Source Code
My CM12 Repo -- https://github.com/lonespeaker?tab=repositories
CyanogenMod -- https://github.com/CyanogenMod
Thanks and Credits
Thanks to @crpalmer (https://github.com/crpalmer) for the picassowifi files without whom this would not be possible.
Thanks to @Barracuda77777 (https://github.com/barracuda7), @eousphoros (https://github.com/eousphoros) for providing help and fixes here and on github.
// end
Changelog
Thanks to @Barracuda77777 - Post #22 contains an alternative version that he is working on.
http://forum.xda-developers.com/showpost.php?p=57300243&postcount=22
10th Dec
Camera is now working! But.... there is an error after you take a picture, so you need to reopen the camera app to take another picture, but at least you can take a picture!
Updated to CM12 sources 10th Dec 15:00 GMT.
7th Dec
Recents button now works. If you enable onscreen buttons, then the hardware buttons still work, albeit with the backlight on them turned off.
The sdcard seems to work, I had to reformat mine to get it recognised.
Wifi is now working thanks to barracuda7
Hoping T700/8.4 is not far behind. Can't test, but great job anyways. [emoji2]
Awesome job buddy!
hhairplane said:
Hoping T700/8.4 is not far behind. Can't test, but great job anyways. [emoji2]
Click to expand...
Click to collapse
T700 got it first check original development. Great work lone speaker on getting lollipop to the t800.
Looking forward to it !!! Great job !
Having more of a nightmare trying to work out how to use git and github to put my changes up there lol
My work is based off @crpalmer excellent work and with some not too big changes but I'd like to fork his work and then push my changes to keep his credits, but I'm having a nightmare
lonespeaker said:
Having more of a nightmare trying to work out how to use git and github to put my changes up there lol
My work is based off @crpalmer excellent work and with some not too big changes but I'd like to fork his work and then push my changes to keep his credits, but I'm having a nightmare
Click to expand...
Click to collapse
I fixed WIFI, Uploading now
Barracuda77777 said:
I fixed WIFI, Uploading now
Click to expand...
Click to collapse
excellent, how did you do it?
This is looking great! Awesome work. I realise its a very early build but hows the speed of it?
lonespeaker said:
excellent, how did you do it?
Click to expand...
Click to collapse
it was the blobs, I will upload to git soon, I am uploading rom atm, once done, will do that next, so you can fork and fix your build
Barracuda77777 said:
it was the blobs, I will upload to git soon, I am uploading rom atm, once done, will do that next, so you can fork and fix your build
Click to expand...
Click to collapse
I've been playing with ones from various places and no luck so Im so glad you figured it out. I will fork to my git and then try and work out how to add my own fixes to that fork and maybe be able to contribute this time lol
lonespeaker said:
I've been playing with ones from various places and no luck so Im so glad you figured it out. I will fork to my git and then try and work out how to add my own fixes to that fork and maybe be able to contribute this time lol
Click to expand...
Click to collapse
do you mind if I post my rom in this thread?
Barracuda77777 said:
do you mind if I post my rom in this thread?
Click to expand...
Click to collapse
No not at all, go for it
i
lonespeaker said:
No not at all, go for it
Click to expand...
Click to collapse
thank you
here is the build with WIFI working:
cm-12-20141206-UNOFFICIAL-chagallwifi.zip
here is the link to the vendor files
Also, like lonespeaker, l have borrowed heavily from @crpalmer to get this rom up and going, please thank him and also if you wish to donate to him that would be great, without him there would have been no LP rom yet
Barracuda77777 said:
it was the blobs, I will upload to git soon, I am uploading rom atm, once done, will do that next, so you can fork and fix your build
Click to expand...
Click to collapse
Always the blobs. Some day maybe we will get source for some of this stuff.
Would a build be possible for 805 as well?
Which gapps should I use...can you point me to it? Thanks
naomile said:
Which gapps should I use...can you point me to it? Thanks
Click to expand...
Click to collapse
Im pretty sure you need to use the lollipop gapps since cm12 is lollipop. http://highonandroid.com/android-apps/download-android-5-0-lollipop-gapps/
This is very promising . fun to give it a go. Thankyou for you hard work guys. As said in the OP not ready for daily driver yet. One thing I noticed as I could at the moment its all about smoothing out the bugs. The recents apps button doesn't work. (Although I did select in options to double press home button to bring up recent apps to get around it. On screen buttons disabled
Discontinued.
Awaiting for thread deletion.
Thanks...Nice work after your miui 5 ROM
Help please..
Need someone who can risk his device by testing this ROM......
Happy holi.....
Happy holi my friends...
May this holi bring lots of Colors in your life!! and in mine too.
Kunal Gautam said:
Need someone who can risk his device by testing this ROM......
Click to expand...
Click to collapse
I tried to install but it gives error 7 i think update.script should be rechecked.
Deep_dhimaan said:
I tried to install but it gives error 7 i think update.script should be rechecked.
Click to expand...
Click to collapse
Thank you very much, i've understood whats the problem( as a pm by ashkineeeeee).
New update coming soon. Stay tuned.
Hey bros...
so there were some problem with permissions, it seems that it is fixed now..
Flash the ROM and review here....
----------------------edit 1---------------------
dont flash the rom now!!!
Some files are missing in boot.img
how stupid i am!!
------------------------edit 2-----------------------
Flash it now!
Last build not installed,error 7.
mels01 said:
Last build not installed,error 7.
Click to expand...
Click to collapse
Logs,screenshots?
Try installing from internal storage... Or update your recovery to the latest one by android andi...
Thanks!
Hey, I would like to help out, can I have the link to the ROM?
theportal2 said:
Hey, I would like to help out, can I have the link to the ROM?
Click to expand...
Click to collapse
I agree this message is a bit long but it is worth reading.
- Thanks, but sorry. Even if I give you the links and even if spend your precious time you would only be able to fix the error 7.
- Actually I've already fixed that(or know what's the issue atleast). There are files that are missing from the directories that are listed in the updater script. They cannot be deleted as the original base ROM I compiled was from UA(unlegacy android) that are based on the newer sources.
- Some files that are required for MIUI are also missing.
- Boot.img is incomplete. Which will result in bootloop even if I upload the error 7 fixed ROM.
- I am giving my board exams that are one of the biggest exams in India. And I cannot afford to score less in these.
- All I need is a older base ROM ,CyanogenMod 11 made around may of 2016. And also it must support init.d because the port ROM requires that.
- I've taken permissions from the maker of the port ROM. He has allowed me to proceed.
- All I need is permission from Android-Andi, as only he has older CM ROMs.
- I cannot compile because older sources are not available or maybe I am not known to them
Hope you understand. Thank you.
P.S. - Android-Andi if you read this please reply. You are the only one who can help me(by providing me permissions to use your ROM as a base).
With best regards,
Kunal Gautam
Links
Kunal Gautam said:
I agree this message is a bit long but it is worth reading.
- Thanks, but sorry. Even if I give you the links and even if spend your precious time you would only be able to fix the error 7.
- Actually I've already fixed that(or know what's the issue atleast). There are files that are missing from the directories that are listed in the updater script. They cannot be deleted as the original base ROM I compiled was from UA(unlegacy android) that are based on the newer sources.
- Some files that are required for MIUI are also missing.
- Boot.img is incomplete. Which will result in bootloop even if I upload the error 7 fixed ROM.
- I am giving my board exams that are one of the biggest exams in India. And I cannot afford to score less in these.
- All I need is a older base ROM ,CyanogenMod 11 made around may of 2016. And also it must support init.d because the port ROM requires that.
- I've taken permissions from the maker of the port ROM. He has allowed me to proceed.
- All I need is permission from Android-Andi, as only he has older CM ROMs.
- I cannot compile because older sources are not available or maybe I am not known to them
Hope you understand. Thank you.
P.S. - Android-Andi if you read this please reply. You are the only one who can help me(by providing me permissions to use your ROM as a base).
With best regards,
Kunal Gautam
Click to expand...
Click to collapse
Have you seen this CM 11? https://forum.xda-developers.com/galaxy-tab-2/7-inch-development/rom-cm-11-0-galaxy-tab-2-t3737392
Just made last month by @Deltadroid
Links are removed because *the ROM is not complete yet*.
Thanks, but I need to confirm a few things before I could use a ROM(includes init.d support and a bunch of other things). Also, it is very important that deltadroid provide me permission to use his ROM.
Thank you!
Regards,
KG
-----_edit_--------
I just saw deltadroid's thread, the title clearly says that the ROM is for p3110. I want to make a unified one. I need a ROM made with unified device tree.
If I do port, it will only work on p3110 and maybe on every 7" device. I don't want do this.
Sorry, but yeah thanks!
Just wait till 3 april 2018. Most probably I will upload.
Edit 2
Or I must say it an update. 75 percent of the work is done. Somehow I managed to get a base ROM(only I know how). Only build.prop editing and Updater script editing work left(these are the most difficult BTW).
Update coming soon. Stay tuned.
I've updated the links. I've uploaded the new ROM. I've done with porting(i guess). I've used a lot of time.
Flash and review!
Kunal Gautam said:
I've updated the links. I've uploaded the new ROM. I've done with porting(i guess). I've used a lot of time.
Flash and review!
Click to expand...
Click to collapse
No wonder the ROM doesn't work.... Security patch is in a wrong format.
"ro.build.version.security_patch=2080-17-March"
It should be, "ro.build.version.security_patch=2018-03-01"
or,
"ro.build.version.security_patch=2018-03-05"
And this, hardly doubt this will work, but idk.
"ro.build.date.utc=999999999999"
Mistakes....................
EDIT**** Build id should be the app id: example lets say the id is 678, on build.prop, it would say 678.
you have, "ro.build.id=KUNAL"
secretwolf98 said:
No wonder the ROM doesn't work.... Security patch is in a wrong format.
"ro.build.version.security_patch=2080-17-March"
It should be, "ro.build.version.security_patch=2018-03-01"
or,
"ro.build.version.security_patch=2018-03-05"
And this, hardly doubt this will work, but idk.
"ro.build.date.utc=999999999999"
Mistakes....................
EDIT**** Build id should be the app id: example lets say the id is 678, on build.prop, it would say 678.
you have, "ro.build.id=KUNAL"
Click to expand...
Click to collapse
You, sir, definitely have a lot to offer. I am afraid that this is not the actual problem. By now, I surely understand the importance of logs. Would be very helpful if someone could arrange me them.
And about your post it seemed really rude, raw, insulting and manipulating to me. But however, helpful. It makes it really hard to continue developing for a 6 years old Tab, with hardware that has nothing to offer in 2018. At least, I am trying.
Since, this was an Alpha build(because I moved sources) these problems are sure to arise. I did the same(build.prop things) with my kinda successful ROM MIUI 5(see it in the 7" forums).
I guess you haven't tasted port ROMs yet. They are hard to build. Alike your compiling ones, you have source, type some commands, turn your computer on for about 5 hours, when done upload it.
I am sure you must have did trail and error (in chemistry and math) porting ROMs is just the same. I am sure, that as a developer, you must know what logs actually mean.
But whatever, thank you for you review(insult I guess).
Kunal Gautam said:
You, sir, definitely have a lot to offer. I am afraid that this is not the actual problem. By now, I surely understand the importance of logs. Would be very helpful if someone could arrange me them.
And about your post it seemed really rude, raw, insulting and manipulating to me. But however, helpful. It makes it really hard to continue developing for a 6 years old Tab, with hardware that has nothing to offer in 2018. At least, I am trying.
Since, this was an Alpha build(because I moved sources) these problems are sure to arise. I did the same(build.prop things) with my kinda successful ROM MIUI 5(see it in the 7" forums).
I guess you haven't tasted port ROMs yet. They are hard to build. Alike your compiling ones, you have source, type some commands, turn your computer on for about 5 hours, when done upload it.
I am sure you must have did trail and error (in chemistry and math) porting ROMs is just the same. I am sure, that as a developer, you must know what logs actually mean.
But whatever, thank you for you review(insult I guess).
Click to expand...
Click to collapse
FYI, I port ROMs. It was pointers what to fix, if you wanted to get this ROM better, than it is already.
Kunal Gautam said:
(...)
P.S. - Android-Andi if you read this please reply. You are the only one who can help me(by providing me permissions to use your ROM as a base).
With best regards,
Kunal Gautam
Click to expand...
Click to collapse
Sorry, I won't give permissions after different people used my ROMs as base in the past without permissions. Hope there is a learning affect....
Since i love OpenSource: Sources are available on every official GitHub (slim, Omni, Lineage, UA) and up to date (note: I wouldn't have to do this, I could keep all device trees private but I am updating them for everyone - always). You'll have to compile your own base ROM to use for such port ROMs (I am not a fan of).
Android-Andi said:
Sorry, I won't give permissions after different people used my ROMs as base in the past without permissions. Hope there is a learning affect....
Since i love OpenSource: Sources are available on every official GitHub (slim, Omni, Lineage, UA) and up to date (note: I wouldn't have to do this, I could keep all device trees private but I am updating them for everyone - always). You'll have to compile your own base ROM to use for such port ROMs (I am not a fan of).
Click to expand...
Click to collapse
Thank you. For at least replying. You works will always be appreciated. Now, I am gonna close this thread. Thanks again!