Related
New MotoX from sprint.
android version 4.2.2
baseband msm8960pro_bp_2323.020.90.00r
kernel 3.4.42.-xline.
system version 139.14.1
build 13.9.0q2.x-116-mx-17-57-1
i did a fair amount of searching but could not find the proper instructions for obtaining root access for the moto x. Need root access or this device would be a deal breaker.
Can someone point me to a link? I would be much appreciated. Thanks Listers!!!
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
I did search the web and the forums; I'm sorry. it was a long day, i had just purchased the phone and wanted to make sure i didn't brick it. I have rooted/jailbroken several other devices but wanted to know if the latest ota update would cause a problem for that.
Again, I'm sorry for for the excess forum baggage.
I'll try again.
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
moises1204 said:
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
Click to expand...
Click to collapse
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
bullpen7979 said:
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
Click to expand...
Click to collapse
ownmoto or whatever?? um... ok... I can tell you haven't browsed the different sections for the Moto X here or you would have seen in the "Moto X Original Android Development" section that its called "PwnMyMoto"
Brokenwall gave you a way to root your sprint device, no matter what stock rom you're running... OTA updates or not. Granted unlocking your bootloader voids your warranty... and he didn't give you a 100% newbie step by step guide which it now seems you were really looking for.
Also in the Moto X Original Android Development is a thread titiled... "[Root] RockMyMoto (Yes, even the first OTA)" which is pretty obvious as to what it is for. If you took a few minutes to read it, you'd know it is what you want if you don't want to unlock your bootloader. Its not a very long thead (141 posts currently) so it wont take long to read. The original post contains everything you need, except how to make sure you have Telnet as part of your Windows install (there are posts in that thread later that say what to do to enable/install Telnet as a Windows Feature inside Add/Remove Programs).
Sorry, if I come across as harsh. I know you just want to root without screwing up your phone, and I get that. But I'm afraid if you haven't been able to look around and find this stuff, you'll likely not be able to properly follow and understand the instructions and will therefore stand a good chance of messing up your phone!!!
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Again, I'm sorry for being stuck here and having to ask the question. I would greatly appreciate the assistance of someone who can speak to my specific situation.
Thank you and regards to those who can help.
Bull
bullpen7979 said:
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
Click to expand...
Click to collapse
The steps taken in the video are exactly explained in the post.
There are a few assumptions.. 1. Your PC has telnet on it, or you know how to install it. (there is a link further in that thread which Windows users can follow. 2. You have ADB Driver and Platform tools from the AndroidSDK installed correctly on your PC, and Moto drivers installed. Again, there are threads on this already, so you'll have to find/follow them.
You could also try to follow this post -> http://forum.xda-developers.com/showthread.php?p=47067076 however, it uses puttytel.exe instead of Telnet so it will look a little different. It too assumes you've properly installed ADB Driver and Platform Toos from the Android SDK along with the Moto drivers.
Another option is the "Tool Kit" -> http://forum.xda-developers.com/showthread.php?t=2477132 which is an "all in one" type tool that should set things up and help you too. I've not used it, but it appears to be a complete package including ADB and the drivers. Only thing would be if you want to use "Flash back to stock" you need to download the ROM file separately.
bullpen7979 said:
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Click to expand...
Click to collapse
Right now, there is the rom the phone shipped with. If you have that, you use PwnMyMoto process to root it. The "camera update" that was pushed over the air. If you have that, you use RockMyMoto. And as of yesterday, if you have Verizon X, there is KitKat which can not be rooted (unless your carrier allows you to unlock your phone's boot loader)
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. Bummed. I just want my device rooted so I can send my daughter the one I promised here.
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. I'd even accept remote assistance via logmein. Pretty bummed. I just want my device rooted so I can send my daughter the one I promised her.
I have no idea why this process has been so difficult this time around. I have rooted, downloaded & installed custom roms, etc.
http://forum.xda-developers.com/showthread.php?t=2536200
Please help. I am out of ideas.
jayboyyyy said:
http://forum.xda-developers.com/showthread.php?t=2536200
Click to expand...
Click to collapse
Isn't this just for the verizon model?
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
I have to believe it can be done, I'm just not getting it for some reason.
I'm really sorry, as I have said in multiple posts. Like I said, I would paypal you a reasonable sum if one of the more experienced people out there want to remote in via logmein and help. I know that sounds lame. I'm normally a guy who likes to research it all himself and do this.
I'm normally the guy who helps other people with this stuff, but I just can't hash this out. I've spent the last three days of my free time reading, researching, trying to get the thing to connect as a drive so I can push files to it and run them via adb.. Even went so far as considering buying a wireless adapter to put the files there wirelessly. I'd try now but I'm exhausted. If you can help, please PM me and we can work out something if you are willing. Thanks to those who have suggested methods. I do appreciate your help. I have tried them all except the last kit kat method which I thought was just for Verizon. I'm with sprint. As tired as I am, I'm afraid to brick the thing. I'm very close to asking for a method to restore the phone and take it back. I really wanted wireless tether. I need it for work and to run the ipad on occasion. Sorry this was a long post/thread.
Sorry I'm not as quick as the rest of you. Just want a rooted phone and can't seem to get it done this time on my own.
Any suggestions?
bullpen7979 said:
Isn't this just for the verizon model?
Click to expand...
Click to collapse
No. That will work for any Moto X Developer Edition or Carrier edition with an unlocked boot loader. So T-Mobile, Sprint, etc.. If you can unlock your boot loader via -> https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth then you can root via this process.
bullpen7979 said:
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
Click to expand...
Click to collapse
To get your phone to show up in windows as Drive Letter, needs USB Mass Storage mode. Ok, You've installed an app for that, fine... but 1. I'm not aware of that app working, and more importantly, 2. I am not aware of any root method in these forums that requires your phone to show as a "drive letter" to work. So I couldn't even begin to suggest what you are doing wrong.
What instructions are you actually trying to follow? Why not post questions on it in that particular thread, including exact details of what you've done, what you see on your phone, any/all errors or messages, etc.???
And if what you really want to do is tether with sprint, I hope you have checked out threads with suggestions on hacks/ways that work to tether on Sprint Moto X before you worry about rooting.
For example, if you want to remain non-rooted, FoxFi could possibly be an option. As I am a Verizon user and haven't used it, I can't say how well it works for Spint, and I can't say how well it works for Verizon, just that Verizon KK users say it doesn't work, but it did with the JB/4.2.2 roms..
KidJoe;
Thanks for your patience. I'm sorry about all of this. I have tried to be as clear as I can be, but I will redouble my efforts. Let me read clearly that last link and I will post back. I do want root access for all the other cool things it enables too, so I'm determined to get it right. I just want to be careful not to miss something and turn a decent phone into a paperweight.
That link you referenced is exactly what I used to unlock. When I reboot the phone, I get a white screen with a red exclamation point that says bootloader unlocked.
Fox Fi is a no go
Update. Just tried Foxfi. Does not work with current status of unlock but not rooted. I need root, but how does one copy files to the device via usb? I remember there being a setting.
I opened a new thread on this subject. http://forum.xda-developers.com/showthread.php?p=47740046#post47740046
Hope that's not against the rules. I really thing the failure is related to my inability (or ignorance of how to ) push files to the device.
Good gravy. This has eaten up WAY too much time.
Apparently its a mixed bag over at sprint. Some can some can't.
http://www.sprintusers.com/forum/showthread.php?t=234246
I've had the phone since launch and have been waiting for a root method to surface that does not require rolling back to 4.2.2. Would something like this be possible?
Sorry if this has been asked before. Thank you
EDIT: VZW Dev edition
Bg8780 said:
I've had the phone since launch and have been waiting for a root method to surface that does not require rolling back to 4.2.2. Would something like this be possible?
Sorry if this has been asked before. Thank you
EDIT: VZW Dev edition
Click to expand...
Click to collapse
You have a Dev edition phone just unlock the bootloader.
Wow....
murso74 said:
Wow....
Click to expand...
Click to collapse
Sorry, I realize this is probably a dumb question but I've been really busy in the past couple years and have been out of the root game for awhile. A lot has changed since my OG Droid days.
You have a DEV EDITION. unlock the BOOTLOADER and root it.
Plain and simple.
Sent from my XT1053 using XDA Premium 4 mobile app
http://forum.xda-developers.com/showthread.php?t=2603358
All you need to know.
I thought this was the easiest guide and it includes the files you need http://www.elementalxdesigns.com/ec...our-Moto-X-Developer-Edition-and-install-TWRP
After you unlock follow the steps to install TWRP. When you reboot you'll be rooted.
Thanks everyone! Like I said before sorry for the stupid question I finally have the time to get back into the rooting stuff. Unlocked the bootloader via Moto's site and it bricked my phone lol. Pretty ironic the one time I brick a device is going the OEM's route to unlock. So learned a lot unbricking it. All rooted now and back to stock recovery. Thanks for the replies and resources. ☺
@Bg8780
The link supplied by @Restola is a very complete and newbie friendly set of instructions, including directing you to Moto's web site to obtain the unique unlock code needed for your phone. The included mfastboot is a little older, as are the Moto Device Drivers, and ADB. Consider viewing -> http://mark.cdmaforums.com/ADB.htm to get them.
And a TIP if you use the instruction's Method B of booting into fastboot/booloader mode, you need to make sure your phone is not plugged into anything until after you see the Fastboot AP screen on your phone.
Additionally, after completing the install of TWRP, it doesn't have you reboot into it (NEEDED!!), and actually rooting (via installing SuperSU or having TWRP itself root you).
You can also use the thread @KJ linked, it has two has 2 sections you need to expand... "How To Unlock Your Bootloader" which talks to you about what is needed and getting the code from Moto's web site, and "Rooting Unlocked Bootloader" which talks you through the process to root. It contains LINKS of up to date files that will work with 4.4 and 4.4.2. However the TWRP from -> http://techerrata.com/browse/twrp2/ghost came out after those instructions were posted.
EDIT: Never mind, I see you're already done... I'll just leave this here anyway in case someone else comes a long...
KidJoe said:
@Bg8780
The link supplied by @Restola is a very complete and newbie friendly set of instructions, including directing you to Moto's web site to obtain the unique unlock code needed for your phone. The included mfastboot is a little older, as are the Moto Device Drivers, and ADB. Consider viewing -> http://mark.cdmaforums.com/ADB.htm to get them.
And a TIP if you use the instruction's Method B of booting into fastboot/booloader mode, you need to make sure your phone is not plugged into anything until after you see the Fastboot AP screen on your phone.
Additionally, after completing the install of TWRP, it doesn't have you reboot into it (NEEDED!!), and actually rooting (via installing SuperSU or having TWRP itself root you).
You can also use the thread @KJ linked, it has two has 2 sections you need to expand... "How To Unlock Your Bootloader" which talks to you about what is needed and getting the code from Moto's web site, and "Rooting Unlocked Bootloader" which talks you through the process to root. It contains LINKS of up to date files that will work with 4.4 and 4.4.2. However the TWRP from -> http://techerrata.com/browse/twrp2/ghost came out after those instructions were posted.
EDIT: Never mind, I see you're already done... I'll just leave this here anyway in case someone else comes a long...
Click to expand...
Click to collapse
Yep all done now but thanks KidJoe, your comment doesn't go unappreciated.
Hey guys,
Recently, I have been trying to re-root my LG G2 VS980 that was returned to lollipop stock (LG Firmware). However, all the tools I knew that previously worked, (Ioroot, Towelroot, Stumproot, Kingoroot, etc..) did not work. After months of testing, I finally found one app that currently works called KingRoot.
As far as I know, it is the only root method that acutally still works after LG patched most of the exploits so I thought I would share the info with you guys in case some of you are still interested in rooting your G2.
Instructions:
1. Install Kingroot: http://kingroot.net/ (the APK doesn't work for the G2)
2. Go to settings in your phone and click the build number 7-10 times to enable Developer Options
3. Go to Developer Options and enable USB Debugging
4. plug the phone into your computer and launch the program. Make sure you see the USB Debugging card that will pop up on your phone.
Launch the program and allow the program to root your phone.
Sidenote: The only downside to the app is it is all in Korean but it is very easy to tell what it is asking due to excellent pictures
After you receive root, download the app RootChecker just to make sure.
To Install TWRP:
1. Instructions: Go to Play Store and type in the search window, "AUTOREC".
2. Select the correct variant: ex. VS980=Verizon etc...
3. Install the app.
4. Watch TWRP Install on your phone.
5. Reward yourself on your hard work with a pat on the back.
So that's it; A fast easy, and trouble free method on getting root and installing TWRP
Thanks for this. I recently acquired a G2, and will be trying this out tonight.
tribalartgod said:
Thanks for this. I recently acquired a G2, and will be trying this out tonight.
Click to expand...
Click to collapse
No problem. Have fun with your custom ROM of choice.
Can you share the setup files? I also need to re-root my Verizon phone. The kingroot ownload links looks dead
i downlaoded it from here. I have usb dev enabled. now what? http://kingroot-pc.en.uptodown.com/download
Stuck on that step. I know its telling me to enable USB debuggin which I have, it doens' do anythong when I click Go in Korean
I managed to enable debugging mode which was by setting the 'USB Type" on the phone to "Internet -> Ethernet"
But Kingroot isn't managing to root the phone. It goes 100 percent and nothing.
Ioroot managed to get the phone into the reboot phase but the phone no longer processed the splash screen of the recover/bootloader. The splash screen which has the android mascot on its back with abdomen open.
"LG G2 One lick Tool" makes the phone go to "download mode" but its stuck at 0 percent. I disconnect and replug in hope of kickstarting it, doesn't work.
What can I do now?
y300owner said:
I managed to enable debugging mode which was by setting the 'USB Type" on the phone to "Internet -> Ethernet"
But Kingroot isn't managing to root the phone. It goes 100 percent and nothing.
Ioroot managed to get the phone into the reboot phase but the phone no longer processed the splash screen of the recover/bootloader. The splash screen which has the android mascot on its back with abdomen open.
"LG G2 One lick Tool" makes the phone go to "download mode" but its stuck at 0 percent. I disconnect and replug in hope of kickstarting it, doesn't work.
What can I do now?
Click to expand...
Click to collapse
Where you able to get it to work? I am running into the same problems.
Sent from my SM-N920V using Tapatalk
y300owner said:
Can you share the setup files? I also need to re-root my Verizon phone. The kingroot ownload links looks dead
i downlaoded it from here. I have usb dev enabled. now what? http://kingroot-pc.en.uptodown.com/download
Stuck on that step. I know its telling me to enable USB debuggin which I have, it doens' do anythong when I click Go in Korean
Click to expand...
Click to collapse
Hmm... Sorry for the late response. Try this link and see if it works: http://www.kingroot.org/
mach01 said:
Hmm... Sorry for the late response. Try this link and see if it works: http://www.kingroot.org/
Click to expand...
Click to collapse
Thanks I tried almost almost everything.
Stumbled upon Stump root last night and it brute forced it way in.
---------- Post added at 12:46 PM ---------- Previous post was at 12:44 PM ----------
Jshokamp said:
Where you able to get it to work? I am running into the same problems.
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
What problem? Check one of the thread I started. Posted everything on it.
y300owner said:
Thanks I tried almost almost everything.
Stumbled upon Stump root last night and it brute forced it way in.
---------- Post added at 12:46 PM ---------- Previous post was at 12:44 PM ----------
What problem? Check one of the thread I started. Posted everything on it.
Click to expand...
Click to collapse
You on 39aa or just 39a?
Lawlrus said:
You on 39aa or just 39a?
Click to expand...
Click to collapse
No idea. I was on a downgraded stock ROM, VS980_27A or was it VS980_24A. Can't remember; 4.4.2
Whatever it was, none of the popular rooting method was working. They were managing to do 'semi root' as in root message was displayed in "hard reset mode" and in 'download mode' but there was no root when the OS fully booted. The 'stock recovery' was also corrupted as in it showed a dead android with red exclamation mark. From the searching I did, people were saying there was no recovery installed so I needed one but I could not install. No stock recovery means no 'adb'.
Stump root gave 'complete' root. I hope you understand what I'm trying to say.
Will this work if I am on the 39aa update from Verizon? I am skeptical about this because this is my only phone and don't need to mess it up.
UserofAndroid1813 said:
Will this work if I am on the 39aa update from Verizon? I am skeptical about this because this is my only phone and don't need to mess it up.
Click to expand...
Click to collapse
I don't think I've seen a way to root 39aa as of yet. One of our developers was asking about it as well, if you do find a way, please @ me so I can hook him up
I'm still looking around for a way.
Lawlrus said:
I don't think I've seen a way to root 39aa as of yet. One of our developers was asking about it as well, if you do find a way, please @ me so I can hook him up
I'm still looking around for a way.
Click to expand...
Click to collapse
I tried and failed at it. I am downgrading to VS98039A_05 and going from there. it seems VS9803AA was meant to patch root and also SF security patches.
This XML file does not appear to have any style information associated with it.
The document tree is shown below.
<Error><Code>AccountProblem</Code><Message>
Your Google account is not currently enabled for this operation. Please check https://code.google.com/apis/console/#:billing to see if you have a past due balance or if the credit card (or other payment mechanism) on your account is expired. You can find additional information at https://developers.google.com/storage/docs/signup</Message></Error>
Thanks for this. For people who don't want to mess with Korean, or if Kingroot doesn't work, LG One Click Root still works on VS9803AA, although you may have to run it 3 or 4 times. Here's the original post: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
And here's a good guide: http://webtrickz.com/how-to-root-lg-g2-running-lollipop-with-lg-one-click-root/
Interesting... I've tried that method four times and it never worked for me. Good to hear it works for other people though. I agree not to many people want to use
Korean deciphering skills just to root their phone but its just an option.
marathonjon said:
Thanks for this. For people who don't want to mess with Korean, or if Kingroot doesn't work, LG One Click Root still works on VS9803AA, although you may have to run it 3 or 4 times. Here's the original post: http://forum.xda-developers.com/lg-g...lipop-t3056951
And here's a good guide: http://webtrickz.com/how-to-root-lg-...ne-click-root/
Click to expand...
Click to collapse
Both of these links are dead.
CruelSun said:
Both of these links are dead.
Click to expand...
Click to collapse
Links are fixed. The whole URLs don't show in the post, but if you click on them, they should work.
those with the issue of kingroot not reading your phone plugged in. put your usb option on phone to PTP camera mode and it will work now.
Even doing all, i m still unable to get my phone recognized. Switched many times befween ptp
Sent from my VS980 4G using Tapatalk
---------- Post added at 05:55 AM ---------- Previous post was at 05:54 AM ----------
Furqan Ullah said:
Even doing all, i m still unable to get my phone recognized. Switched many times befween ptp
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
And other file transfer option. USB picture is displaying sometimes or sometimes circle
Sent from my VS980 4G using Tapatalk
I downloaded the wugfresh tool to try and unlock and root my Nexus 6 used on Verizon but obtained from the Google Play store.
Wugfresh recognizes the device. I have enabled debugging and developer options and have the phone properly set up with the original cable.
When I open wugfresh and after I download the appropriate files, I click on unlock phone and a pop up just says ENCRYPTED.
I tried googling as well as searching this forum and I cannot figure out how to remove encryption without the phone already having been unlocked and reverted back to Lollipop.
Can someone give me a hand? I'm unsure of what to do next.
Thanks!
ghostofdavid said:
I downloaded the wugfresh tool to try and unlock and root my Nexus 6 used on Verizon but obtained from the Google Play store.
Wugfresh recognizes the device. I have enabled debugging and developer options and have the phone properly set up with the original cable.
When I open wugfresh and after I download the appropriate files, I click on unlock phone and a pop up just says ENCRYPTED.
I tried googling as well as searching this forum and I cannot figure out how to remove encryption without the phone already having been unlocked and reverted back to Lollipop.
Can someone give me a hand? I'm unsure of what to do next.
Thanks!
Click to expand...
Click to collapse
All the info you need is in the stickies. Many will tell you not to bother with tool kits. This is due to that you wont know how to fix any issues that may come up. It is always best to learn what you are doing. All you re.ally have to do to un-encrypt is to completely wipe the device. Then you need a kernel that doesnt force the encryption
I checked this sticky - http://forum.xda-developers.com/nexus-6/help/nexus-6-frequently-questions-t3106029
Q17: What is encryption and should I disable it?
"First off, to best answer the "what is" question, look HERE. Now, whether or not to disable it, is entirely up to you. For the most part, the benefits are dependent on your usage. HERE is a thread discussing encryption on 5.1 so please check it out."
I clicked that link and ended up at http://forum.xda-developers.com/and...-fed-patcher-v8-forceencrypt-disable-t3234422
It appears that this would work if my phone was unlocked, but it isn't. I don't yet understand how I can flash anything if my phone is still locked and I don't know how to unlock the phone if the device is still encrypted.
I'm still stuck!
ghostofdavid said:
I checked this sticky - http://forum.xda-developers.com/nexus-6/help/nexus-6-frequently-questions-t3106029
Q17: What is encryption and should I disable it?
"First off, to best answer the "what is" question, look HERE. Now, whether or not to disable it, is entirely up to you. For the most part, the benefits are dependent on your usage. HERE is a thread discussing encryption on 5.1 so please check it out."
I clicked that link and ended up at http://forum.xda-developers.com/and...-fed-patcher-v8-forceencrypt-disable-t3234422
It appears that this would work if my phone was unlocked, but it isn't. I don't yet understand how I can flash anything if my phone is still locked and I don't know how to unlock the phone if the device is still encrypted.
I'm still stuck!
Click to expand...
Click to collapse
Read the stickies on unlocking your phone manually first.
Be careful that some of the stickies and or threads on rooting ect are old. Before you blindly follow instructions check the date and the version its meant for. If its more then a month or so old, or states a different version of android proceed with causion. Also, make sure you read the last maybe 4 or so pages of the threads if not more, as if the instructions ARE out of date you will see people note it there, and either suggest what changes are necessary or point to newer guides.
You really will help yourself out A LOT to learn the little bit it takes to do it manually. Multiple threads every day from people who have one little thing go wrong with the toolkits, that would be REALLY easy to fix if they knew what they were doing.
First read up on how to unlock, its really really easy... Once your unlocked STAY UNLOCKED, and make sure you keep "allow OEM unlock" on... Do those two things and you can almost definitely fix your phone no matter what you mess up.
is there anyway to root and/or unlock the bootloader for the cricket phone?
i need root so i can tweak some things to fix an overheating issues ive always had with this.
i turned on OEM unlocking in dev options and i switched on "Allow root access" in the engineering menu...
any thoughts?
xSpartacusx said:
is there anyway to root and/or unlock the bootloader for the cricket phone?
i need root so i can tweak some things to fix an overheating issues ive always had with this.
i turned on OEM unlocking in dev options and i switched on "Allow root access" in the engineering menu...
any thoughts?
Click to expand...
Click to collapse
there isn't any way to do it yet as far as I know
Sorry if I'm misunderstanding. I've done a ton of searching and am still unable to figure it out.
Is it possible to root this device? (6055U)? I'm not concerned w/ the bootloader, just simply want to root. I have not yet tried any of the one-click's (kingroot, kingoroot, etc)
I would really appreciate it if someone would please explain to me. All of these sites/threads make it seem simple, just unsure of the U device.
I just got it today from Cricket and am considering returning it if I am unable to get root.
THANK YOU VERY MUCH!!!
There is currently no root for the cricket variant of the device, I believe it's mainly because the fastboot OEM unlock command is disabled, so we can't get permissive selinux. I've been able to get semi root with dirty cow but it's basically useless, unless someone knows how to use that to turn off selinux, or get a real root shell running, neither of which I have been able to accomplish so far. If anyone has any ideas shoot them my way.