Hi
I need help to reboot into recovery.
Have tried most methods on youtube and most android webpages.
The vol up or down and power key all combos.
Only thing i could get was into safe mode.
Model: TA - 1004
Hardware: 64gb storage/ 4gb ram
Software: Oreo8 and was nougat 7.1.1 (didnt work for both)
Dev options: OEM unlocking selected.
Appreciate if anyone can help. Thanks!
Hello,
1- Nokia off.
2- Plug USB cable (mandatory).
3- Then push on vol+ until android robot appears.
4- Then push Power On first, maintain it and then press Vol+ to launch recovery menu.
Works fine for me.
Regards
Christian
cb_diamond said:
Hello,
1- Nokia off.
2- Plug USB cable (mandatory).
3- Then push on vol+ until android robot appears.
4- Then push Power On first, maintain it and then press Vol+ to launch recovery menu.
Works fine for me.
Regards
Christian
Click to expand...
Click to collapse
Appreciated ty. gonna try
This does not work for me. I've watched videos on YouTube, and still, nothing. If I hold down the volume-up and power buttons, I just get the android logo over and over. This is a pretty essential functionality to be lacking. Someone on Nokia Support forums said some of the phones do not have a recovery?
Personally I tried several methods for booting into recovery, using the button combinations that were instructed on different sites. In the end the only method that worked for me, was enabling Android debugging and using adb to boot into recovery. Too bad that after all that, the recovery was of no help for me, as there was no option to wipe ART cache.
Theobias said:
Hi
I need help to reboot into recovery.
Have tried most methods on youtube and most android webpages.
The vol up or down and power key all combos.
Only thing i could get was into safe mode.
Model: TA - 1004
Hardware: 64gb storage/ 4gb ram
Software: Oreo8 and was nougat 7.1.1 (didnt work for both)
Dev options: OEM unlocking selected.
Appreciate if anyone can help. Thanks!
Click to expand...
Click to collapse
I have tried several methods but worked this process only:
https://forum.xda-developers.com/showpost.php?p=74406267&postcount=34
Rd. Vortex said:
Personally I tried several methods for booting into recovery, using the button combinations that were instructed on different sites. In the end the only method that worked for me, was enabling Android debugging and using adb to boot into recovery. Too bad that after all that, the recovery was of no help for me, as there was no option to wipe ART cache.
Click to expand...
Click to collapse
Same experience here, and again I was going for a cache wipe, but apparently Oreo manages cache different to Nougat. Here for what is worth, to the original questioner, is the note I made having finally got into recovery after many frustrating attempts:
1. Connect via USB cable to PC
2. Ensure ADB debugging is on and the "Transfer Files" mode is selected
3. At the command-line type: adb reboot recovery
The phone will reboot to an image of an android robot on it's back with a red exclamation mark and "no command" written on the screen
4. When you see this, first hold the power button down and then, while still holding the power button, press Vol+
You should now be in the recovery menu
---------- Post added at 03:13 PM ---------- Previous post was at 02:49 PM ----------
I played around with this method, originally Posted by cb_diamond, and found it sometimes worked and sometimes didn't, this may be of help to the first questioner. Almost the same sequence as previously described but holding down Vol+ before attaching the cable, this seems to work consistently for me.
1. Power off your Nokia 8
2. Hold Vol+ down (and continue to hold it down)
3. Plug in a USB cable from your PC into the phone, after a few seconds "Powered by Android Appears" and several seconds later the image of the green android robot appears on screen. You can now let go Vol+
4. Next hold the power button down and while doing so press Vol+
Hopefully you are now in the recovery menu
Related
My phone is AT & T MB886 with native JB. I could access the black screen with blue letters, I made the recovery, clearing cache, etc etc etc, will not start, see the initial logo motorola and then the screen stays black. how I can reinstall the operating system android jb?? can be done from the SD?? as I do?? before I pass this problem had the phone rooted. The problem appeared after doing a factory restore on the phone tonces not start and I am the black screen with very little light.
Easy fix dude!
Follow these steps to put your device into fastboot.
(1. Turn off your phone.
(2. Hold vol up + vol down, immediately.
(3. Use vol down to quickly scroll to "ap fastboot."
(4. Press vol up.
(5. Connect usb to the pc.
(6. follow this tutorial by Huatz84.
Good luck dude.
OK!!!
Codex01 said:
Easy fix dude!
Follow these steps to put your device into fastboot.
(1. Turn off your phone.
(2. Hold vol up + vol down, immediately.
(3. Use vol down to quickly scroll to "ap fastboot."
(4. Press vol up.
(5. Connect usb to the pc.
(6. follow this tutorial by Huatz84.
Good luck dude.
Click to expand...
Click to collapse
sorry for my English, I'm from Argentina. After three attempts I managed to install android, it works fine, no problems, and is the same as it was before. This same process can install any other ROM?? you could tell me what to do to transfer to SD memory phone memory or install applications on the SD??
After installing Maclaw CW11.0 i decided to install SlimROM.
Now, It seems I'm in a Bootloop.
I'm unable to go to download mode or Recovery by using the buttons.. Vol Up(or Down) + Home + Power Doesn't do anything
Vol Up + Vol Down and then plugging in the USB cable doesn't do anything either...
I just see the SlimROM logo blinking for a while... then it stops... and it reboots...
Anyone any ideas of what i can do?
S.Phrenic said:
After installing Maclaw CW11.0 i decided to install SlimROM.
Now, It seems I'm in a Bootloop.
I'm unable to go to download mode or Recovery by using the buttons.. Vol Up(or Down) + Home + Power Doesn't do anything
Vol Up + Vol Down and then plugging in the USB cable doesn't do anything either...
I just see the SlimROM logo blinking for a while... then it stops... and it reboots...
Anyone any ideas of what i can do?
Click to expand...
Click to collapse
i think you forgot to wipe before flashing the new rom.
So pull out the battery, wait few seconds, put it in and try to reboot into recovery or download-mode.
Good luck
I'd love to do that, but how do I go into those modes if 3 button combo doesn't work nor vol up + vol down + plug in usb?
S.Phrenic said:
I'd love to do that, but how do I go into those modes if 3 button combo doesn't work nor vol up + vol down + plug in usb?
Click to expand...
Click to collapse
try this one (but without guarranty:
1. power off phone
2. remove battery.
3. plug in USB cable to computer and phone (with battery out)
4. hold Vol Up and Vol Down
5. drop in the battery while still holding the vol buttons
6. in 2 secs you'll be in download mode
Good luck
Thnx for the good luck
However, I've tried that method and it didn't work. I've ordered a USB Jig, maybe that can help.
Let you know
why cant you go to download mode
dont release those buttons until you go to download mode [do it when your phone is completly powered off]
did u flash three way combo recovery by benzonator
eswarvf said:
why cant you go to download mode
dont release those buttons until you go to download mode [do it when your phone is completly powered off]
did u flash three way combo recovery by benzonator
Click to expand...
Click to collapse
no he didn´t ... for flashing he needs download-mode
But he can use adb method
---------- Post added at 11:12 PM ---------- Previous post was at 11:01 PM ----------
S.Phrenic said:
After installing Maclaw CW11.0 i decided to install SlimROM.
Now, It seems I'm in a Bootloop.
I'm unable to go to download mode or Recovery by using the buttons.. Vol Up(or Down) + Home + Power Doesn't do anything
Vol Up + Vol Down and then plugging in the USB cable doesn't do anything either...
I just see the SlimROM logo blinking for a while... then it stops... and it reboots...
Anyone any ideas of what i can do?
Click to expand...
Click to collapse
Not a brick only no system support
Download mode - use three way comnations only when ur phone is totally turned off and press and hold them don't leave them
I own multiple phones and tablets and I can get every single one into download mode. Just not this one. The three button combo does not work, not even when I remove my battery first. As soon as I'm home I'll make a small video of what happens.
Btw, the only mode I can actually get in to is: POWER RESET or UNKNOWN UPLOAD MODE
I get there by holding Vol Up & Power On
Any thoughts?
https://www.youtube.com/watch?v=eEWcKCHi3YE
Sent from my GT-N8010 using XDA Premium HD app
Omg, I sound so bored, sorry about that. Had a long day and I'm very tired
Sent from my GT-N8010 using XDA Premium HD app
U r pressing wrong combination for download mode you have to press
Vol down + "power" + home and have to hold it to enter no s3 mini logo appears before download mode
http://www.youtube.com/watch?v=1tdznfLJsyY
see in this video he doesnt leave power button
and after that flash 3 way recovery from this thread by using odin - download mode
http://forum.xda-developers.com/showthread.php?t=2066407
@S. Phrenic
press vol up + menu + power much longer. The s3 mini logo appears 2 times and then recovery mode comes up.
if this doesn´t help, try ADB method
1. Download and install Android SDK
2. Connect the phone to the PC via USB
3. Press Win key+ r and type cmd
4. Type adb reboot recovery
5. Done. Phone should reboot into recovery
Good luck
In the video I'm showing 3 different things:
1. Vol Up + Power + Home
2. Vol Down + Power + Home
3. Vol Up + Vol Down
Non of them work. I checked your video, I don't see how I do anything different.
Duration change, check! I've now held it for 3 min.
I've got a S2 plus laying next to me and I can get into download mode without any trouble. This means I know how to get into recovery and download mode without any trouble.
https://www.youtube.com/watch?v=V9PZ5-66_L4
hopefully I'll get my jig tomorrow
S.Phrenic said:
In the video I'm showing 3 different things:
1. Vol Up + Power + Home
2. Vol Down + Power + Home
3. Vol Up + Vol Down
Non of them work. I checked your video, I don't see how I do anything different.
Duration change, check! I've now held it for 3 min.
I've got a S2 plus laying next to me and I can get into download mode without any trouble. This means I know how to get into recovery and download mode without any trouble.
https://www.youtube.com/watch?v=V9PZ5-66_L4
hopefully I'll get my jig tomorrow
Click to expand...
Click to collapse
Oh sorry please press those buttons at same time I also got this situation
OK now I will post this video myself watch carefully
And compare
---------- Post added at 07:51 PM ---------- Previous post was at 07:37 PM ----------
here you go sorry for english but video shows all
http://www.youtube.com/watch?v=NAb2JwsG79A&feature=youtu.be
Does my phone need to be turned on for the adb method?
it says, error: device not found
Kies doesn't see the device... because it's not powered i'm assuming..
Think I found my problem.... USB debugging is disabled... I think.... as I can't remember enabling it
Try emergency restore in Samsung Kies.
S.Phrenic said:
Does my phone need to be turned on for the adb method?
it says, error: device not found
Kies doesn't see the device... because it's not powered i'm assuming..
Think I found my problem.... USB debugging is disabled... I think.... as I can't remember enabling it
Click to expand...
Click to collapse
Yes it needs to be turned on to system with adb debug, or to custom recovery.
For emergency mode in kies I think you need download mode as well.
You don't need adb debug enabled to use download mode, but for some reason you can't enter dl-mode
tys0n said:
Yes it needs to be turned on to system with adb debug, or to custom recovery.
For emergency mode in kies I think you need download mode as well.
You don't need adb debug enabled to use download mode, but for some reason you can't enter dl-mode
Click to expand...
Click to collapse
First: I Fixed it!!! Jeej!... Used an USB Jig which i bought for a few bucks.
Second: This person seems to have the same problem
My phone was frozen when I was taking a video,
then I forced restart the phone by pressing power button until it restarted.
However, my phone stuck at the android logo for a quite long time with the screen on, so I decided to do a factory reset.
I have tried the following steps on my friend's phone as we bought exactly same phone,
and succeded at first attempt.
1, volume down + power button goes into boot options.
2, then android logo, then about 2 seconds later, dead android guy would appear.
HERE is my phone's problem:
in this step after showing android logo, my phone would vibrate once and then just gone black,just like turning off. NO DEAD ANDROID GUY showed up. Certainly would not be able to do the rest steps.
I have searched and tried so many methods that others used when they could not get into the bootloader. NONE of them succeded.
So I need help, guys.
Anyone got any ideas.
Thanks in advanced !!!
no one ?
I guess I had to bring it to the store for repairing.
bluecard said:
no one ?
I guess I had to bring it to the store for repairing.
Click to expand...
Click to collapse
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
bitstra said:
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
Click to expand...
Click to collapse
post in right forum........... see my signature for 5.0.2 easy installer or search for my kitkat version in xt1068 forum
My zuk z2 pro went into test mode and I can not get out
Help
I have the same problem. I cannot even touch the buttons at the bottom, which is very annoying :/
Please see this post
phoenixrap said:
My zuk z2 pro went into test mode and I can not get out
Help
Click to expand...
Click to collapse
I don't enter in the fastboot mode. The phone is blocking in mode FFBM and I can't touch de bottoms on display
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
N2k1 said:
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
Click to expand...
Click to collapse
Nope. I have the same situation and am stuck with the test mode screen when attempt to boot the system. Recovery works fine. Tried the hold both volume buttons and plug into PC, and now have tried this. Always the same screen, nothing about selecting English, just the option to access the Options Menu. Selecting Fastboot takes me to menu where Ican select Recovery, Startup, AND "Boot to FFBM". Have wiped all but internal SD, and "Repaired" System, Persist, Cache. Have tried installing an official ROM and Lineage ROM. No combinations of these have fixed the problem.
Problem started when I was updating the official ROM and decided to try out the FFBM boot option. BIG mistake.
Now am stuck with a system that will no longer boot.
John
JBoy53 said:
Nope. I have the same situation and am stuck with the test mode screen when attempt to boot the system. Recovery works fine. Tried the hold both volume buttons and plug into PC, and now have tried this. Always the same screen, nothing about selecting English, just the option to access the Options Menu. Selecting Fastboot takes me to menu where Ican select Recovery, Startup, AND "Boot to FFBM". Have wiped all but internal SD, and "Repaired" System, Persist, Cache. Have tried installing an official ROM and Lineage ROM. No combinations of these have fixed the problem.
Problem started when I was updating the official ROM and decided to try out the FFBM boot option. BIG mistake.
Now am stuck with a system that will no longer boot.
John
Click to expand...
Click to collapse
UPDATE: TWRP 3.0.3-0 saved my ass. It permits selection of booting into EDL (9008) mode, bypassed all the PC based commands that weren't working, and I reloaded Zuk factory ROM again. Got past the test mode screen finally. Discovered that I don't care for the original ROM at all, too many Google things I'm accustomed to (Like Google Play store) missing. Added a few things back in, but wasn't worth the trouble. It took me about 15 minutes to refla sh it using TWRP with the latest nightly version of the Mokee ROM for this device (Android 7.1.2) and it works GREAT. Lineage wasn't ready yet.
The only hold over from all my initial problems is that upon boot it acts of if I'm doing the up Vol button action. It goes to the screen where I can press a Vol button and go into the boot loader or just wait 5 seconds for it to carry on booting normally. I don't know how to correct this, but not really a problem.
Link about TWRP 3.0.3-0 -
HTML:
https://forum.xda-developers.com/zuk-z2-pro/development/twrp-twrp-3-0-3-0-teamwin-recovery-t3529601
N2k1 said:
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
Click to expand...
Click to collapse
Works fine.
I'm now finally trying to flash the T-Mobile version onto my sm-g998u1, When I follow the instructions to get into bootloader it just restarts the phone normally like a regular reboot? Any guidance on getting this done correctly. Below are the steps I saw how to reboot into bootloader:
Turn off your Galaxy S21.
Connect it to your computer using a USB cable.
When the charging percentage level animation stops, hold the Volume UP + Power keys simultaneously for 5-7 seconds.
Keep both the hardware buttons pressed until you enter the Android Recovery mode.
Once you enter the recovery mode on your Galaxy S21, highlight Reboot to Bootloader using the Volume Down key and select it using the Power button.
Your Galaxy S21 will boot into the Download Mode
Much thanks and sorry again for the many posts.
fil.lujan said:
I'm now finally trying to flash the T-Mobile version onto my sm-g998u1, When I follow the instructions to get into bootloader it just restarts the phone normally like a regular reboot? Any guidance on getting this done correctly. Below are the steps I saw how to reboot into bootloader:
Turn off your Galaxy S21.
Connect it to your computer using a USB cable.
When the charging percentage level animation stops, hold the Volume UP + Power keys simultaneously for 5-7 seconds.
Keep both the hardware buttons pressed until you enter the Android Recovery mode.
Once you enter the recovery mode on your Galaxy S21, highlight Reboot to Bootloader using the Volume Down key and select it using the Power button.
Your Galaxy S21 will boot into the Download Mode
Much thanks and sorry again for the many posts.
Click to expand...
Click to collapse
Hi mate
Maybe step 3 is not quite right, you can check this thread it has a lot of information
Reboot Phone in Download Mode: Connect USB-cable to your computer. Hold down "Volume up" and "Volume down" at same time. While holding down, connect the USB-cable to your phone. Or use the command "adb reboot-bootloader"
Do not wait for the % animation.....
Further information here
You can also do it via ADB (adb reboot download)
Thank you. Appreciate it.
Glad I could help