Database Develop

extended battery hard case from seidio

just saw this on ppcgeeks thought I'd post it here for anyone looking. It's "coming soon" but not sure about ETA:
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=993

So its ONLY 2 months late from when they said it would be out. But just the same, good to see it is ALMOST out.

now Shipping! Woot!

Too bad it would cost me 100 bucks for the package. 70 for the extended battery, and another 35 for the case. Not sure I could justify dropping that for my cell phone.

Has anyone tried any of the batteries from Seidio. They are offering an extended battery of 3200 MAH. I don't want to try one of these if there is a chance of frying my 6800.
Link to Seidio 3200MAH battery

huh?
mr.ellsworth said:
Has anyone tried any of the batteries from Seidio. They are offering an extended battery of 3200 MAH. I don't want to try one of these if there is a chance of frying my 6800.
Link to Seidio 3200MAH battery
Click to expand...
Click to collapse
So, let me see if I understand your question, in a forum post about the extended hard case for the seidio battery, you wonder if anyone has tried any of the batteries?
Why would any of us be discussing the hard case for the SEIDIO extended battery if we didn't already have the battery to get the hard case for????
Do you imagine we're all going to buy the hard case for the extended battery and use it with the stock battery?

I have the Seidio Battery...
It will not FRY your phone!

sanjsrik said:
So, let me see if I understand your question, in a forum post about the extended hard case for the seidio battery, you wonder if anyone has tried any of the batteries?
Why would any of us be discussing the hard case for the SEIDIO extended battery if we didn't already have the battery to get the hard case for????
Do you imagine we're all going to buy the hard case for the extended battery and use it with the stock battery?
Click to expand...
Click to collapse
Well let’s see!
Maybe because it is nothing more than a hard case.
or
Because there is no requirement stating that one must have the SEIDIO extended battery to use the SEIDIO hard case.
or
Maybe I just thought that because it was apparent that some of the viewers in this thread may have some knowledge about extended batteries and since I have heard about aftermarket batteries/accessories that have caused problems in the past thereby voiding the warranty and the fact that to replace this phone would be pricey it might just be a good idea to ask those with experience in the extended battery arena about the integrity of the product before I purchase.
I don't want a $579.00 (retail replacement) iron on my hands!
mr.ellsworth

Dude, it's a HARDCASE ONLY FOR THE EXTENDED BATTERY. Why would anyone buy the hardcase for the extended battery IF they didn't have the extended battery in the first place?
If you wanted to use the "slim" hardcase then that would make sense, but this is ONLY for users who have the EXTENDED battery to buy this hard case.

Just nearly a week and a half ago I placed my first order to get a slim rubber case and clip..and the day I saw that the extended case was in I ordered the battery and case..got it today and so far nothing but good results. I've had it on for what seems to be like 7 hours and it shows 80% still remaining...BUT during a good 4 or 5 of those hours i had bluetooth on, wifi on and logged onto windows live messanger..it didn't budge. Its not that much bigger with this battery and with somedays not knowing if i'll be working 8 hours or 14 this helps out alot! It does add a bit of weight to it but i'm willing to give that extra weight and thickness for all that my phone is capable of doing.

mr.ellsworth said:
Well let’s see!
I don't want a $579.00 (retail replacement) iron on my hands!
mr.ellsworth
Click to expand...
Click to collapse
$579.00?? It costs $619.00 to replace at Verizon!!

not worth it, haha
Well, check it out. I'm the kind of person to take care of my junk. I went to my god fathers heart surgery, and that morning in the parking lot i dropped my phone (1st time) cause you know, it's damn slippery. I was juggling other crap in my hands as well. The phone dropped, back cover popped off no problem.
It wasn't until later i noticed that the left msg record button was jammed, i set that button as 'alt+tab.' crap. I tried fixing it, it proved impossible with my methods.
I used my insurance and got a new phone for $50. That was late 2007. Just this past wednesday, about 4-5 months after with this new phone, i dropped it at work from a very low height. What are the odds that the same freaking button broke? Fook it, right? I can learn to live with it. But i still want the case. Even if you got this phone for $200, a $40 investment to protect it is worth it. I am a power user running 10 emails through flexmail at all times, amongst other things such as my exchange work email. So i will not only get this case but the extra capacity battery.
If you don't think $40 is worth covering $200, then you probably have problems. If this had been available when i bought the phone, i would have gladly paid $40 over $50 and the hassel i went through setting up the new phone.
thanks for the great find gand!

So after having this setup for nearly a week I am quite pleased. From having last plugged it in on Friday for about a 45 minutes it lasted till sunday afternoon at about 4:30 where it showed 30%. Given i was barely talking on the phone and sent only a dozen or two texts...the standby time still amazed me. I google mapped a few things as well..I definately reccomend this.

Ok so I ordered:
3200MAH SUPER EXTENDED BATTERY FOR PPC 6800 ($64.95 USD)
RUBBERIZED CASE/HOLSTER COMBO FOR EXTENDED XV 6800 / PPC 6800 ($49.95 USD)
It came out to a total of $127.15 (USD)
The battery comes with a cover as shown in the picture, but unlike the picture it says seidio on the back of it, very cool!
The 'rubberized case' with holder is pretty cool. It's not as 'grippy' as i thought it would be, but definitly an improvement over the original finish. I am more confident with it in my hand.
I've begun charging the battery that supposedly has 60% charge according to WM.
I also use my phone quite a bit so i'll be reporting in on whether this battery was worth it or not.
Worth noting is that unlike many others, i had no problems at all installing the battery case cover, nor the rubber covers. Just be patient and look at what you're doing and you should be ok.
So far 100% satisfied, will update in a few weeks.

not wanting the extreme bulk of the 3200 battery, i went ahead and got a 1650 battery instead...BIG MISTAKE, don't get it, I don't notice any battery level change, I went about with my usual business hopefully ending the day with at least 30-40% (I generally start using the phone at 9-10 till maybe 8-9) at night but instead, as usual it dropped to 0 and dies on me. With a case and the battery i forked up 108 bucks- so pay the extra 20 bucks and get the 3200 instead, i regret not doing so!

GhettoBSD said:
Ok so I ordered:
3200MAH SUPER EXTENDED BATTERY FOR PPC 6800 ($64.95 USD)
RUBBERIZED CASE/HOLSTER COMBO FOR EXTENDED XV 6800 / PPC 6800 ($49.95 USD)
It came out to a total of $127.15 (USD)
The battery comes with a cover as shown in the picture, but unlike the picture it says seidio on the back of it, very cool!
The 'rubberized case' with holder is pretty cool. It's not as 'grippy' as i thought it would be, but definitly an improvement over the original finish. I am more confident with it in my hand.
I've begun charging the battery that supposedly has 60% charge according to WM.
I also use my phone quite a bit so i'll be reporting in on whether this battery was worth it or not.
Worth noting is that unlike many others, i had no problems at all installing the battery case cover, nor the rubber covers. Just be patient and look at what you're doing and you should be ok.
So far 100% satisfied, will update in a few weeks.
Click to expand...
Click to collapse
Any update on the battery? Do ppl comment on how big it is often?

1999TL said:
Any update on the battery? Do ppl comment on how big it is often?
Click to expand...
Click to collapse
I use the Mugen 3600mAh battery and Seido hard case; in three months of use, no one has ever commented on the thickness of my phone. It fits (fills) the hand better for a more secure grip. But yes, the Seido "rubberized" case isn't all that grippy, so I recommend plastering it with e-grips appliques.

Seidio extended battery case hardware hack for macro lens and sunshield.
The pictures will show what a sweet hack this is. I'd wanted both a sun shield and a macro lens, and when I got this new battery and the case that came with it I saw the possibilities right away.
First I eyeballed the length and width of the slider that I would need (about 9/16" by 7/16" )
Then I carved a channel the thickness of my slider in the large lower lip.
The opposing channel was constructed from three layers of the same black plastic sheet I used for the slider.
Cleaned out any excess glue from the track, checking it with the slider by hand.
Then I temporarily spot glued the three layer channel to the case with the slider in place to see if I needed to make any adjustments to the width of the slider.
After making adjustments I glued the three layer channel to the case with the slider in place.
Now I was ready to make the hole for my macro lens (You want to make it centered with respect to the camera) I just eyeballed it. Made a small hole with a drill, then with a round needle file made it as concentric with the hole in the case for the camera as I could by hand.
Having stripped numerous machines and devices over the years I had a little selection of small lenses.
I chose a small magnifier of a size a little bit larger than the hole I'd filed in the slider and glued it in place.
When that dried I put the case back on the phone and I moved the slider to the macro position and made sure it was centered correctly. Then a sliver of the same black plastic sheet was carefully glued in the channel as a block to stop the slider at that position.
That was pretty much it. I used 5 minute clear epoxy which allowed me to clean out glue that was in bad places while it was still tacky.
http://filer.case.edu/sxg7/public/po...20shooting.jpg
http://filer.case.edu/sxg7/public/Su...20Position.jpg
http://filer.case.edu/sxg7/public/Macro Position.jpg
http://filer.case.edu/sxg7/public/Without macro.jpg
http://filer.case.edu/sxg7/public/With Macro.jpg

[Q] Seidio 3500mah Battery Silicon Cover?

I've looked back through all the accessory discussion and can't find anything definitively answering this. I just got the Seidio 3500mah battery and would like to find a silicon, or some sort of slip case for my HTC Hero CDMA.
Is there one out there that works with the back cover provided with this battery? Thanks for the help!

short answer no.. the only thing i have found that works.. is the htc leather case.. bought it at best buy for 30 bucks. but online seen as cheap at 10 bucks..

Hexidecimal said:
I've looked back through all the accessory discussion and can't find anything definitively answering this. I just got the Seidio 3500mah battery and would like to find a silicon, or some sort of slip case for my HTC Hero CDMA.
Is there one out there that works with the back cover provided with this battery? Thanks for the help!
Click to expand...
Click to collapse
How good is the battery? Is it worth it?

This has been my experience thus far:
OEM Battery - Typical days use includes:
Wifi Tether & Pandora on Bus from one hospital to the next while at work
Tweetdeck/Email on all day, Ocassional fruit ninja during down time.
Texts/Calls to co workers in various parts of the hospital all day.
Pandora/Grooveshark on the Bus/Drive home
Usually dead as soon as I start the drive home.
Seidio 3500mah Battery
All of the above plus additional Pandora/Grooveshark, heavier data usage due to less fear of battery death, Touchdown Exchange app on all times.
I charge my battery over night on Thursday, unplugged Friday morning at 6:30 AM. It is now 2:40 PM Saturday and I still have a 40% battery charge. I have not done the calibration on battery use in CM6 yet because I'm still waiting for my phone to die.
Totally worth it IMO. Also a bit of clear scotch tape on the side of my phone keeps the battery door in place with no issues.

Hexidecimal said:
This has been my experience thus far:
OEM Battery - Typical days use includes:
Wifi Tether & Pandora on Bus from one hospital to the next while at work
Tweetdeck/Email on all day, Ocassional fruit ninja during down time.
Texts/Calls to co workers in various parts of the hospital all day.
Pandora/Grooveshark on the Bus/Drive home
Usually dead as soon as I start the drive home.
Seidio 3500mah Battery
All of the above plus additional Pandora/Grooveshark, heavier data usage due to less fear of battery death, Touchdown Exchange app on all times.
I charge my battery over night on Thursday, unplugged Friday morning at 6:30 AM. It is now 2:40 PM Saturday and I still have a 40% battery charge. I have not done the calibration on battery use in CM6 yet because I'm still waiting for my phone to die.
Totally worth it IMO. Also a bit of clear scotch tape on the side of my phone keeps the battery door in place with no issues.
Click to expand...
Click to collapse
Cool, thanks for the info! I'm considering getting this, and since you have had a positive experience it's much more encouraging

Ive used this battery since the summer. Go for it, juice for days... mine will now be put to use in my INC. after i contact seidio to purchase a new batt door for it.

spiritcrusher33 said:
Ive used this battery since the summer. Go for it, juice for days... mine will now be put to use in my INC. after i contact seidio to purchase a new batt door for it.
Click to expand...
Click to collapse
Sounds good, maybe I'll have to invest it it

I've bought mine from Amazon.com the cheapest they had just because you can't trust most of the batteries . mine was 8 bux

Extended batteries (3500mah in this case)

Well... so far I've ordered a 3500mah extended battery from Hong Kong.. but as I believe this will take rather a long time to get here... I've ordered another one from the UK as well from ECELL, which apparently has a silver extended cover.
I'm well aware that these are likely cack batteries and I have a plan for that
Basically I'm hoping that whichever one I consider to be the worst will either die on me... or I will simply end it's life prematurely. I am going to cut open the battery (Carefully!) and try to replace the cell's with two Genuine OEM 1500 mah batteries, for a true 3000mah. I bit elaborate but I think it should be possible as long as I cut in the right places.
EDIT: I found genuine LG batteries for about £8.50 each plus about £5 postage, so will order 2 batteries for around £22. They are special order though, so will take 14-28 days. (I am also getting them to confirm the capacity is defo 1500mah, as no point buying them otherwise.)
Update: Images in post #29 : http://forum.xda-developers.com/showpost.php?p=23120430&postcount=29

Well.. I was getting a little impatient... so when I was really tired (and may just a little to drink), I ordered one from ECELL on ebay. It had a silver cover and a 3600mah battery (We all know it isn't that much), and was listed for the 2x P990. Turns up.. it's for the LG Optimus S :-( Bummer. Just trying to get a return/refund.
So... experiment is delayed somewhat.
Update: Two LG OEM batteries have been ordered ; The incorrect extended battery sent back ; Still awaiting the HK Extended battery. Bizarrely I thought I actually ordered a 2nd UK based battery.. but I was so tired I think I forgot to do it lol. Can't wait to have a play with these

Refund form ECELL given without issue Have now received the 3500mah battery, and just running that to see how thing's are with it. I am waiting on the two OEM batteries to turn up from LG before I can start modding this extended battery.
Since I also have a bigger case now, I am going to look to see if I can play around with an external antenna as well.. and maybe fit a bigger antenna inside the expanded case. With that in mind I have ordered two antenna's of different types to see which one fits (expensive.. but then at least we all know )

Sounds really interesting.. keep us updated please!
Sent from my Optimus 2X using xda premium

Scougar said:
Refund form ECELL given without issue Have now received the 3500mah battery, and just running that to see how thing's are with it. I am waiting on the two OEM batteries to turn up from LG before I can start modding this extended battery.
Since I also have a bigger case now, I am going to look to see if I can play around with an external antenna as well.. and maybe fit a bigger antenna inside the expanded case. With that in mind I have ordered two antenna's of different types to see which one fits (expensive.. but then at least we all know )
Click to expand...
Click to collapse
i got the 2400Mah battery(2 days of usage) i'm looking forward for you're results
specially the modded one pictures will also be great if u can.
thanks!

Apparently the LG batteries have been dispatched now, so should get them within a few days. Only annoying thing is that even LG were unable to confirm whether these batteries I'm getting are 1500mah. I will be gutted if they are not lol.
btw.. you should see my desk at present at home. I have about 5 phones, four of them in bits awaiting tinkering, LED bike lights (all modified), circuit boards from laptops everywhere, reparing a 4x 18650 battery pack + routers etc lol. And I just realised that I actually don't know where my soldering iron is ROFL. Must dig one out.
Anyway... I'm looking forward to it and if I can get it working, I'll put up pics etc. I'm very interested in trying to get the temp sensor working (although I realise it may only work for one of the batteries.).
P.s. as for extended cases and covers I bought this w w w.ebay.co.uk/itm/Clear-Black-Trim-Rubber-Case-Cover-LCD-Film-Pro-LG-Optimus-2X-G2X-/180782656771?pt=UK_MobilePhones_MobilePhonesCasesP ouches&hash=item2a177c6d03 and then cut out the back clear part. It's not a perfect fit, but it will work for the moment (Buy at your own risk.. I actually stretched mine too much when getting the clear part out).

Genuine LG batteries have just arrived about 30 seconds ago. They are 1500mah
So with the delivery charge added in they were £11.04 each (£8.49 each without delivery charge). So if you ordered more it would be less due to the one time delivery charge of £5.10. Not bad for a 1500mah genuine battery! Batteries dated 10/09/2011.

Scougar said:
Genuine LG batteries have just arrived about 30 seconds ago. They are 1500mah
So with the delivery charge added in they were £11.04 each (£8.49 each without delivery charge). So if you ordered more it would be less due to the one time delivery charge of £5.10. Not bad for a 1500mah genuine battery! Batteries dated 10/09/2011.
Click to expand...
Click to collapse
Sounds good so will u start Modding them now?
Sent from my LG-P990 using XDA App

shpapy said:
Sounds good so will u start Modding them now?
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
Yes. I've now ordered a second "3500" mah battery so I have a spare cover and shell in case I **** anything up. I am just trying to gauge the capacity of the 3500 battery. On my first run it lastest almost 2 days on stock rom, with a fair amount of use. I would prob say only around 2000mah at a guess though.
I'm just trying to get it to run down again for a 2nd charge now.
Once all that's done, I'll open it up and start tinkering I will have to get both the LG batteries to the same state of charge as well (same voltage level) before hooking them up.)
Bear in mind I've spent £22 on original batteries that I am about to hack open for the cells inside, so there is no going back lol. Pretty expensive mistake if I **** it up relatively speaking.

Scougar said:
Yes. I've now ordered a second "3500" mah battery so I have a spare cover and shell in case I **** anything up. I am just trying to gauge the capacity of the 3500 battery. On my first run it lastest almost 2 days on stock rom, with a fair amount of use. I would prob say only around 2000mah at a guess though.
I'm just trying to get it to run down again for a 2nd charge now.
Once all that's done, I'll open it up and start tinkering I will have to get both the LG batteries to the same state of charge as well (same voltage level) before hooking them up.)
Bear in mind I've spent £22 on original batteries that I am about to hack open for the cells inside, so there is no going back lol. Pretty expensive mistake if I **** it up relatively speaking.
Click to expand...
Click to collapse
no doubt it could be an expensive mistake, but if u succeed which i think you will the results will be probably a 4 day battery. so i think its worth it
i got the 2450Mah battery and it holds about 2 days with medium usage, so im really thrilled about ure test as i dont care about the size of the phone,
if you can share pictures it will be great you can also p.m if u want!!
thanks.
Shpapy.

No problem, will do
I charged the battery again last night, and rapid drained it running bluetooth (nothing connected), some GPS usage and wifi with smartshare running a video across from my NAS drive. In the morning it was down to about 25 percent so tried GPS on cycle to work and then drained it with music and GPS until 1%. Charged it without using it, and it's reporting about 1900mah estimated for the battery. I don't rate the estimator as highly accurate btw, but it's a guide .
I will try to take the battery apart tonight if I can. Not sure on best way to open it though, as I will need to reuse the carcass.

Damn.. was taking it apart and fried the circuit it came with. Unfortunately the metal legs that bring power from either side slipped off and touch the outer shell of the battery, was enough for a small yellow spark :-( oh well. (EDIT: Hmm.. circuit may still be alive actually...)
It's two batteries pressed together with several layers of thin plastic between them, either for insulation, spacing or both. I'm actually pretty surprised the cells weren't isolated better from each other.
Update 1: Well, for the first time.. I just managed to burn myself with electricity opps. These packs are really badly isolated. Shorted it on the tip of my finger... beginning to hurt lol. There are NO ratings on these batteries whatsoever. However, one thing they are is... amazingly well balanced. Just measured them and they are both exactly 3.78V's.
Update 2: The circuit and LG Battery will NOT fit directly into the old casing. There will need to either a mod to the extended casing, or we'll just have to 'go without', and make a casing up. It's looking like it's best to do without using the old battery at all actually, and just wire the two batteries together using the LG circuitry. (Well only one of the circuits).
Update 3: Will dig out the soldering iron tonight and get this double battery running
Update 4: Have VERY BADLY soldered the batteries together and combined battery is now charging in the phone. Due to the excess solder on the sides the battery is not quite proper fit, so I will have to redo it at some point. Really very dissappointed with how awful the soldering is, I will simply HAVE to redo it once this experiment is tested. Any tips on a soldering iron chaps? On the plus side, the one thing I do get is a temperature reading :-D
Tip number 1: Quickly snip the circuit off first and DO NOT let it touch the side of the battery casing, it will short out.
TIp number 2: h t t p://www.technfun.com/pages/article.php?id=22 Excellent guide. Take note of the safety tip!!!!
Points of interest
A) The extended battery is EXACTLY double the width of an LG battery.
B) LG OEM Batteries are made by Sanyo
C) Don't use a conventional soldering iron... it is almost impossible to solder the negative side and you will end up overheating the battery if you are not careful. (Any tips here guys?)

Charge battery up last night, and stayed up wayy too late trying to drain it.
Technique... used the 'flashlight' app to keep the LED on, turned on bluetooth, turned on wifi, and use smartshare to stream a movie (at full screen brightness) to the phone. Played Dungeon Defenders for a while as well at full brighness so hopefully the graphics core would take more power. Battery Temp got as high as 40C under 1400mah draw. Odd thing was that battery widget pro at times reported +25000 Mah(ish), yes PLUS '+', and 25000mah, that's just insane..not sure where it was getting the figures from :-(
7% battery left when I put it down, voltage was 3.550 or very close. This morning, voltage it still had 7% left and voltage had increased to 3.7 ish. Guessing it's because the battery was warm last night when under heavy strain, and now it's relaxed and cooled it's feeling better lol. (Or maybe something else?)
Running gps client down now in attempt to drain the rest before recharging. Ideally want to get it down to 1% before a full charge.

Scougar said:
Charge battery up last night, and stayed up wayy too late trying to drain it.
Technique... used the 'flashlight' app to keep the LED on, turned on bluetooth, turned on wifi, and use smartshare to stream a movie (at full screen brightness) to the phone. Played Dungeon Defenders for a while as well at full brighness so hopefully the graphics core would take more power. Battery Temp got as high as 40C under 1400mah draw. Odd thing was that battery widget pro at times reported +25000 Mah(ish), yes PLUS '+', and 25000mah, that's just insane..not sure where it was getting the figures from :-(
7% battery left when I put it down, voltage was 3.550 or very close. This morning, voltage it still had 7% left and voltage had increased to 3.7 ish. Guessing it's because the battery was warm last night when under heavy strain, and now it's relaxed and cooled it's feeling better lol. (Or maybe something else?)
Running gps client down now in attempt to drain the rest before recharging. Ideally want to get it down to 1% before a full charge.
Click to expand...
Click to collapse
cool progress , can we get some pictures of the new battery?
how were u able to fit it in? i get u got a bigger case but still....
share with us ure images / knowledge its sounds really cool doing.

I basically copied what they had done on the 3500mah battery, and merely connected up the positive to positive and negative to negative terminals of the batteries using thin strips of metal, and only used one circuit from the LG battery. Basically I parallel the batteries to increase capacity.
I used a small spacer to keep the batteries seperated, but thinking about it, I could have use the bodies themselves as the 'negative' but it wouldn't have been a good connection). I then just taped the battery up and use the 3500mah battery sticker to hold it all together.
This really is just a 'prove it works' / prototype, and I will remake it neater, although I may have to buy a better soldering iron.
Pics later.
Note: After charging back up from 1% this morning to 100%, the 'estimated' mah by Battery Widget Pro is 1551mah. This would indicate to me that one battery is not connected properly unfortunately. I'm gonna run the battery and see how long it lasts under general usage. If it lasts only a day and a half, then I suspect I will have to resolder.

I bought a 3500mah half a year back and it wasn't any good. Twice the width but lasts the same as the original one. It'll be good if you could show us some pictures? I may consider making one too!

To be fair the estimated capacity of the 3500mah was around 1800 to 2000 mah. Pretty good considering it came with an extended back cover for under £5. It does seem entirely random though, and I was never comfortable without a temperature sensor.
The work I have done so far is rubbish to be honest. I thought I'd make a better job of soldering. I will have to redo it, as the fit is terrible due to the solder being too big/messy, and the connections are not very or or not working/broken.

Can't wait to see the results.
Sent from my Optimus 2X using Tapatalk

For some reason, battery widget pro was recording very high mah draw/drain. I do not believe I soldered the negative terminals well enough. I took it apart and tried to prise a little flap of metal up for soldering, and managed to rip the terminal off the pack. I will do my best to remedy this of course and let you chaps know the result.

I also have the 3500 mAH and I was wondering if it was really giving 3500 mAH. I'm getting about 1.5 days on this battery with moderate usage. Heavy usage I get about a day. I wonder what I'm doing wrong. I think it's supposed to last longer.

Milestone won't charge 3rd party battery

Well after my Galaxy Nexus has died, found it with a black screen one morning on the charger, I had to reactivate my good old Milestone.
The problem was, I had no battery. The last battery was thrown away and now I had to get replacement.
I found the Milestone/XT702 battery from Sun Global, which gives 1 year warranty for 1850mAh high capacity batteries. Hard enough to find a battery in town for an older phone, so I was a happy camper.
The phone works fine, but when I plug it into charger (tried different chargers and cables), it won't charge. USB plug is working, computer detects it and I can exchange files.
The status of the battery when I check it in the phone under settings is "unknown". I guess that's the reason. Shouldn't it be "discharging"? Any ideas what I can do? Charge is 80% - since one hour no change, without being on a charger.

What rom are you using?
Btw, there are many issues with 3rd party batteries.

If you're using 1% battery steps disable it.
It's not compatible with some aftermarket batteries.

Yes, disabling the 1% steps worked! Battery is charged and works. I bought a $6 battery from china before without any issues with that. This battery is $17 and supposed to be of high quality...
Well now a new problem occured, that touchscreen is acting weird sometimes. I put the phone away for ~4-5 months and it had no issues like that. Is the battery charged more than %60, only a small strip on the right side of the touch is not working. Falls it below %60, the whole touch acts weird.
I am living in a very humid country (Malaysia) and read about moisture can be an issue. So tonight I will put the phone in a bag of rice and hope the condition improves. Otherwise I have to get a new digitizer, saw them for less then $10 with free shipping at eBay.

Check out THIS thread before spending money.

Thanks, I tried something similar. Put my phone into a zipper bag with rice and heated that up in the oven. After the oven reached 70+ C I switched it off and kept it there for about 45 minutes.
About 4mm of the right side of the screen is still not working, but the rest of the screen seems ok. Hope it remains like that - at least I can use the phone.
I also ordered for $8.99 a replacement touch screen. But it will take quite some time to get it devilered from china...
Hope its the correct one
http://www.ebay.de/itm/221043894203?_trksid=p5197.c0.m619

linuxholgi said:
Thanks, I tried something similar. Put my phone into a zipper bag with rice and heated that up in the oven. After the oven reached 70+ C I switched it off and kept it there for about 45 minutes.
About 4mm of the right side of the screen is still not working, but the rest of the screen seems ok. Hope it remains like that - at least I can use the phone.
I also ordered for $8.99 a replacement touch screen. But it will take quite some time to get it devilered from china...
Hope its the correct one
http://www.ebay.de/itm/221043894203?_trksid=p5197.c0.m619
Click to expand...
Click to collapse
Nice tip :good:
Well,the ebay item looks the part. Hope it will work out for you

Where can I find a replacement rear cover? The of the battery contacts fell off!

Hello all, one of the little square charging contacts fell off of my gear live for some reason. I never really wore it much because I was always so worried I would scratch it up, but unfortunately one of the little square charging contacts fell off the back cover of my Gear Live. Is there somewhere I can buy a replacement rear cover? I see it has 4 screws and should be pretty easy to swap out, I just cant find one. If anyone can point me to where I can buy one, I would really appreciate it!
Thanks!

Similar situation here. The contacts on my Gear Live have eroded down to nothing - what were once gold plated contacts are now just chunky holes. It still charges, barely, and only in the right position - but the charging dock piece also snapped its latches off and I use a binder clip to hold it together. So that's two failures... first the clips, then the contacts. It's like Samsung intentionally designed this thing to last less than a year!

I finally found the solution and installed my new back cover today! The watch had ultimately died about a month ago (July 2016, about 9 months after they started severely eroding, above), when the positive/negative power pins finally deteriorated. I'd previously been charging it by occasionally cleaning gunk off the pins, then holding the "dock" in place with a loosened binder clip, every night.
After some deeper Google digging (by model number, SM-R382), I stumbled upon Rounded.com, which has all the parts available for purchase. It took 2-1/2 weeks to arrive from Germany.
Back cover (includes new battery, even though the battery is removable!): https://rounded.com/samsung-galaxy-gear-live-sm-r382-back-cover-black-gh97-15971a.html
Charging dock: https://rounded.com/samsung-galaxy-...g-dock-ee-dr382bb-gh98-33696a-ee-dr382bb.html
Total cost of about $43, and I have a like-new watch again.

FYI, you can just get the charging pins themselves for about $5:
http://www.ebay.ca/itm/262483640074
It takes about 5 mins to replace this. You'll need to have some glue to put in to seal the small PCB out from outside element (or carefully leave the old glue on there).

zivan56 said:
FYI, you can just get the charging pins themselves for about $5:
http://www.ebay.ca/itm/262483640074
It takes about 5 mins to replace this. You'll need to have some glue to put in to seal the small PCB out from outside element (or carefully leave the old glue on there).
Click to expand...
Click to collapse
http://www.fonejoy.com/samsung/wearables/gear-live-sm-r382.html