Please help me. i can't use my phone - Huawei P9 Plus Questions & Answers

In this post i explain all that i do with my phone : https://forum.xda-developers.com/p9-plus/help/problem-root-lost-apps-bluetooth-t3705061?nocache=1
After that, i flash the first .zip from this post: https://forum.xda-developers.com/p9-plus/how-to/root-special-p9plus-l29c636-t3681088
When my phone start i tried to put my pin more than 10 times but not work. I do a factory reset... again.
Now, i don't have keyboard, only voice, i lost some huawei's apps, bluetooth not work and i can't enter to the developer options to enable USB debugging, also i can't enter to security settings to allow apps installs from unknown sources.
When i try to click on developer options or security the settings app closes. The rest of settings work.
With my voice i can't log in to my google account so, i can't install apps.
Please, help me.

Tip: don't create multiple posts saying basically the same thing, you can always edit the first one you create. Now, your phone is c02, so it's vodafone branded. You can try to change cust in order to debrand it (bye bye warranty) or you can search for a vodafone firmware, download both the file update.zip and the file update_data_full.zip and flash them via twrp. You have this "buggy" software because you don't have the complete firmware installed.

Related

Beginner question: Unsure which version of froyo is on my phone

So I bought a Nexus One on craigslist. I thought it was all stock until I ran into the "cannot establish reliable sever connection" when I tried to sign into my google account. My question is how do I restore my phone back to the newest version of android 2.2. It is not unlocked (no unlocked padlock on boot screen). Under "Build number" it says "passion-userdebug Froyo FRE74 28579 test-keys." Under Android version it says "Froyo" instead of 2.2. And many of the 2.2 features are not present such as wifi tethering, and the new icons at the bottom center of the home screen aren't there. I only have the single grid icon and not the set of 3 with the browser and phone. And i'm not sure where to go from here. I want to be able to log into my gmail account and the android marketplace. Any help would be greatly appreciated.
Assuming you verified you have Data Connection enabled and have the proper APN settings::::
Your seller may have rooted the phone without necessarily unlocking the bootloader. see
http://forum.xda-developers.com/showthread.php?t=710842
Also, the link I just added shows the different versions of 2.2 (missing a couple) but FRE74 doesn't look like one of them.
First find out if it is a rooted phone, Check the app drawer for any SuperUser or Spareparts icon. That or try installing Busybox from the marketplace and executing it.
If it is rooted,flash one of the many ROMS available on XDA, Cyanogen just released his beta version tonight. Personally I use Enomther Rom. Official version is out.
And BTW, read up on the process of flashing... most require you to wipe first.
and if it is not rooted....
All you need to do is do a Factory Reset
Settings / Privacy / Factory Data Reset
After that check what your Build number is.
Then you can go to your dialler and enter
*#*#checkin#*#*
What that will do is connect your phone to the Google servers, say hello, and the server will send the update to your phone. (Force OTA - Over The Air update)
My data connection is working, I browse the internet fine except for the youtube app and gmail.com. When I go to gmail.com through my browser I get "a secure data connection could not be established." But yahoomail and flickr logins work fine on both wifi and 3g. No superuser or spareparts icons in the drawer. I can't access the android marketplace since I cannot log into my google account. I did the factory restore and the build number is the same. I did the checkin from my dialer and it said "checkin failed"
So it seems like the phone is rooted but I just need to flash a rom with the froyo features I want. Any links or guides to doing this? I read and superboot seemed like the easiest way.
Sounds to me like an issue with radio... flash a new radio might do the trick. However, before I start messing around with the radio not knowing anything about my phone, I'd look into doing this first.
http://forum.xda-developers.com/showthread.php?t=614850
This will bring your Nexus One back to it's original shipping rom. It's gonna be alot of work, BUT this IS almost a $600 phone.
So I followed those directions and i'm back on android 2.1 and i can log into my google and everything seems to work fine. I want to update to 2.2 so I go to system updates, download the update, and install. But during the install process it shows the little box with the android and the loading bar but it stops and goes to the android and the exclamation point. I'm not sure what to do from here. My Build Number is ERD79
Hold Volume up and press Power (or possibly the other way around). That should bring up the recovery menu.
I tried once with the OTA update I downloaded, the phone restarted and tried to install by itself but went to the android with the !. So I download a froyo rom and rename it update.zip, not .zip.zip. And put it on my phone, I'm in the blue recovery screen and it says signature error. I'm thinking its the wrong rom i'm using.

[Q] Updated my Sam Ativ S to 8.1 and phone reboots constantly

Hi guys, i just updated my Samsung Ativ S today to the WP 8.1, and everything seems to work "fine".
EXCEPT that as soon as I turn off the phone and turn back on, it keeps on for like 20 seconds, sets to flight mode, and reboots. And it keeps doing it over and over again, it won't stop rebooting. I have tried to reset the phone configurations, but it resets again to WP 8.1, and I keep getting this bug everytime I turn the power off. Is there any way to reset it to the oldest firmware(8.0...)? Anyone else experiencing this?
1) hard reset your phone
2) after the configuration of Microsoft account, don't use backup, choose config everything again.
3) If you want to use cortana, choose english and United states for country, speech, display language etc.
Ativ S - Tim Sul - Rebooting Constantly
Dear,
After update my Ativ S, I'm experiencing the same problems discussed by CamilaRamos. I have done the Hard Reset and restarted the WP 8.1 without considering my MS Account. However, after I have inserted the Sim Card, the same problem start to occur again.
Thanks in advance,
I have samsung ativ s and after update 8.1 it is rebooting of one to one minutes.
All app are installed in internal memory, I don't use memory card.
I did many things, but nothing resolved my problem.
I wait that the Microsoft is looking to solve this, because I can't come back to GDR3 and need my phone for my job everyday.
If hard reset doesn't work, follow this steps::
1) reflash the Samsung ativ s rom (Windows phone 8.0 GDR3), following this step by step: http://forum.xda-developers.com/showthread.php?t=2391138
2) The rom and CSC you can download here: http://tweaksparadise.com/download/anaheiim/?action=list&folder=7836
3) After reflash the Windows phone 8 GDR3 rom, reinstall the preview for developers and search again for updates, your phone will update again to Windows phone 8.1.
4) this will solve all issues.
semelocram said:
If hard reset doesn't work, follow this steps::
1) reflash the Samsung ativ s rom (Windows phone 8.0 GDR3), following this step by step: http://forum.xda-developers.com/showthread.php?t=2391138
2) The rom and CSC you can download here: http://tweaksparadise.com/download/anaheiim/?action=list&folder=7836
3) After reflash the Windows phone 8 GDR3 rom, reinstall the preview for developers and search again for updates, your phone will update again to Windows phone 8.1.
4) this will solve all issues.
Click to expand...
Click to collapse
I'll try this. I checked my CSC by the diagnosis app and it's ZTOALL3, but I only found ZTO for download. Is there any problem using this one?
CamilaRamos said:
I'll try this. I checked my CSC by the diagnosis app and it's ZTOALL3, but I only found ZTO for download. Is there any problem using this one?
Click to expand...
Click to collapse
No, no problem
So, I managed to reset my phone back to gdr3 with that tutorial using ZTO csc, but now I have to manually set the APN information to get my 3G connected, and as soon as i reboot the phone, it will erase those configs and I have to set it up again. Is there any way to save it undefinetly, or can I set my csc to ATO and how would I do it, or would it make any difference here?
CamilaRamos said:
So, I managed to reset my phone back to gdr3 with that tutorial using ZTO csc, but now I have to manually set the APN information to get my 3G connected, and as soon as i reboot the phone, it will erase those configs and I have to set it up again. Is there any way to save it undefinetly, or can I set my csc to ATO and how would I do it, or would it make any difference here?
Click to expand...
Click to collapse
I can tell you my story. I also updated my Br-Ativ S (pun intended) to 8.1, coming from a manually flashed GDR3. I had to hard reset the phone in order to start over and correct some bugs, including the one you described. I had a similar issue using the wrong GDR3 rom found on the intarweb.
Good luck!

[Q] How do I proceed

Hi,
I'm new to these things. Please help.
I have partial problems with my phone's speaker. I want to try can it be fixed via System Update.
Speaker problem is kinda mind-bending. Not sure when it occurs.
Speaker seems to work fine when calling someone near. When calling from over ~10 kilometers, speaker distorts the incoming sound. Works fine with loud speaker, which kind of takes the problem out of being problem of my service provider.
I'm quite possibly going to take my phone to the warranty service. That's why I want to have the "Device status: Official", not "Custom".
My friend rooted and installed a custom ROM, which I didn't like. I made him uninstall the ROM but the root stayed. (Late 2013)
Now comes the part I think I f***ed up.
Started watching videos about urooting, unbricking and such. Now what I have accomplished is that I've pressed "unroot" in SuperSU and uninstalled it.
Soon to notice that I should've used some program to clear the Device status.
Not sure what Flashing Android means and when its done, but there is counter which should be put to zero?
Those two things are done in programs which require rooting? So what do I do now?
Installing SuperSU gives me error binary not installed, and SuperSU cannot install it. Someone in fixed this with restarting device in Recovery mode with QuickBoot program which, again, needed the device to be rooted already.
I want to have my System Update done by the "right" way, from "About device" -> "Update". Now it gives me "Your device has been modified."
Please redirect and guide me!
I have S4 active GT-I9295, android version 4.2.2. Ask about baseband, kernel versions/other statuses if you need those informations!
Thank you SO much for your time and help beforehand! :good:
ps. 2 year warranty is till 28.9.15
thanks for everybody for answering!:good::good::good::good:
Make backup of your images, videos and data by copy to ext SD or use Helium from Play Store .
Install =flash 5.0.1 Samsung GT-I9295 firmware best match for your region using PC Odin 3.09 /3.10. The complete firmware *. TAR.MD5 is placed in Odin AP field, no need for other files in the other Odin file fields.
Factory reset after successful flash.
Will set all to stock with latest firmware.
Tools, tutorial and downloads here:
http://www.youmobile.org/blogs/entr...-to-your-Samsung-Device-Using-ODIN-3-Tutorial
More advice and how to
http://forum.xda-developers.com/showthread.php?p=56955843
ThumbsUp button under every post is free to use in case you're in the mood to show appreciation.

Q: Stucked on FRP after updating to MM 6.0.1 ( Please Help )...

Hello guys!
I have updated my N920C to MM 6.0.1 Officially. Unfortunately I didn't enable the developer option and OEM was not unlocked also. I tried to restore or recover my device with KIES and RootJunkey method as well. Neither I can install a custom recovery nor It could be fixed with reset method because of FRP lock. Kindly help me getting out of this problem. Everytime it gets stucked on Google account login after reset And I really don't remember that account which was logged in previously.
Error Message: This device was reset. To continue, sign in with a google account that was previously synced on this device. (and it can't be skipped).
Note: I tried OTG method but it did not work. Bcoz Marshmallow does not allow the file manager to popup directly. That method is supported with Android L or less.
Post the wrong area

Samsung SM-T813 FRP Locked WiFi Switch Greyed Out

Hi,
First, I want to say that I have been looking though many threads with similar problems but I have not found any that have worked for me. If someone could point me to the thread that will solve this problem I would greatly appreciate it.
So my situation is that tablet boots to the "Welcome! Start >" screen and when I hit Start it says "An unauthorized attempt has been made to reset your device to factory default settings. Connect to a Wi-Fi or mobile network to verify your identity." When I move the WiFi switch to "ON" it immediately goes back to "OFF".
I would like to find a way to enable the WiFi so I can enter my credentials but so far all my attempts have failed.
I am running
SAMSUNG/GTS210VEWIFIXX/GS210VEWIFI
6.0.1/MMB29M/T813XXU2APJ1
MMB29M.T813XXU2APJ1
Any attempts to downgrade to T813XXU1APF4_T813XAR1APF1_HOME.tar.md5 in ODIN v3.13 have resulted in [aboot] Fused 2 > Binary 1
Any suggestions to get my tablet up and running again would be greatly appreciated.
Thanks in advance.
After installing COMBINATION_OXA_FA60_T813XXU2API1_OXAFAC_CL7807521_BoxWares.tar.md5, enabling USB debugging, and then installing stock ROM T813XXU2APJ1_T813XAR2APJ1_HOME.tar.md5 I was able to boot to the home screen and login as a guest.
However, in guest mode I cannot enable the Wifi or Bluetooth switches to ON. They just go back to OFF.
I also cannot enable Wifi as Owner so I can enter my login information.
If anyone has any ideas on how to turn Wifi back on I would greatly appreciate the help.
ashlikesnow17 said:
After installing COMBINATION_OXA_FA60_T813XXU2API1_OXAFAC_CL7807521_BoxWares.tar.md5, enabling USB debugging, and then installing stock ROM T813XXU2APJ1_T813XAR2APJ1_HOME.tar.md5 I was able to boot to the home screen and login as a guest.
However, in guest mode I cannot enable the Wifi or Bluetooth switches to ON. They just go back to OFF.
I also cannot enable Wifi as Owner so I can enter my login information.
If anyone has any ideas on how to turn Wifi back on I would greatly appreciate the help.
Click to expand...
Click to collapse
Reinstall the combo firmware then enter settings and factory reset.
Reinstall stock firmware.
I reinstalled the Combo Firmware, did a factory reset from settings, and reinstalled the Stock ROM but the WIFI & Bluetooth will still not enable.
I am waiting to for some other versions of Stock ROM to download and then install to see if it makes any difference.
ashlikesnow17 said:
I reinstalled the Combo Firmware, did a factory reset from settings, and reinstalled the Stock ROM but the WIFI & Bluetooth will still not enable.
I am waiting to for some other versions of Stock ROM to download and then install to see if it makes any difference.
Click to expand...
Click to collapse
Are you flashing the WHOLE firmware?
The full firmware I have tried installing so far I have gotten from Updato: T813XXU2APJ1_T813XAR2APJ1_HOME.tar.md5, T813XXU2APK6_T813XAR2APK6_HOME.tar.md5, & T813XXU2BQD1_T813XAR2BQD1_HOME.tar.md5 which was the firmware I had updated to before downgrading to APJ1.
The tablet has only been used a couple of times so I find it hard to believe the chip is damaged. I bought it as an open box from a retailer with no signs of use.
It was after I did a FRP when I couldn't remember my password when all the trouble started.
Is there some firmware that consists of BL, AP, CSC files that is used during factory setup that I can install?
ashlikesnow17 said:
The full firmware I have tried installing so far I have gotten from Updato: T813XXU2APJ1_T813XAR2APJ1_HOME.tar.md5, T813XXU2APK6_T813XAR2APK6_HOME.tar.md5, & T813XXU2BQD1_T813XAR2BQD1_HOME.tar.md5 which was the firmware I had updated to before downgrading to APJ1.
The tablet has only been used a couple of times so I find it hard to believe the chip is damaged. I bought it as an open box from a retailer with no signs of use.
It was after I did a FRP when I couldn't remember my password when all the trouble started.
Is there some firmware that consists of BL, AP, CSC files that is used during factory setup that I can install?
Click to expand...
Click to collapse
4 file repair firmware can be found below:
https://combinefile.com/index.php?a=downloads&b=folder&id=6185
ashyx said:
4 file repair firmware can be found below:
https://combinefile.com/index.php?a=downloads&b=folder&id=6185
Click to expand...
Click to collapse
I appreciate your help but nothing I do will apparently get the Wi-Fi working again.
I am giving up for now and am considering replacing the motherboard.

Categories

Resources