Database Develop

[Magisk/Root/Xposed/Busybox]Huawei P9 Lite

-This methode is old but working with emui 4 Android MM (6). Not work with Android N (7).
-Xposed not work in systemless mode if your Android security patch is >= november 2016
-Try to search the last version of zip files and apk on google, the version on this tutorial is old.
Hi!
This tutorial will install Magisk, phh's superuser, xposed and busybox on your Huawei P9 lite device!
Tested on a VNS-L31C432B151 version but normally work on all VNS-L31 and VNS-L21.
Magisk will allow you to "hide" the root... not realy just hide because Magisk and phh's superuser systemless edition create the root outside the system folder!
Magisk feature for common user:
-"hide" root (PokémonGo, Androidpay, banking app, ... all work!) work with
-Magisk not only allow you to replace existing file and directories, but also support adding new files and directories into system!
-Update OTA work! (not tested by me)
For more detail visite this post: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Phh's superuser work at 100% on this device
After a lot of Xposed version tested I can say that Xposed systemless edition is by far the best for P9 lite!
DONT install busybox on system folder!
Ok let's go:
1 Update your system on last emui version and swipe data/factory reset to get a clean and untouched device!
2 Unlock your bootloader (see multiple method on this forum)
3 Install TWRP 3.0.2.0 (see multiple method on this forum)
4 Download this files: Magisk V6.zip / phh's superuser 17.zip / xposed-v86.5-sdk23-topjohnwu.zip / Magisk Manager.apk / XposedInstaller_by_dvdandroid.apk. Put all this files on your externalSD.
5 Go to TWRP recovery and flash in order [Magiskv6.zip > phh's_superuser.zip > Xposed-v.86.5.zip] also reboot your device.
6 When you are on the homescreen go reboot again.
7 Install Magisk Manager.apk and XposedInstaller.apk, then go to the playstore download and install Phh's SuperUser app AND Busybox meefik. Reboot after this step.
8 Open your setting app and allow permission SD card to Busybox.
9 Open Busybox >> settings. Remplace the path file /system/xbin/ with /data/busybox/ and check "Remplace Applets". Also go Menu Zip Archive and download this zip.
10 Go on TWRP recovery and flash the busybox zip file.
10 please perform 3 or 4 reboot
DONE!
So, please try to open yours setting app. if it appears you have done! If not, please try again this method
Now, go Magisk Manager (app) and switch root togle off, launch your protected against root app and normally work!
(Dont need reboot between switch root off/on!)(Selinux switch work, but not persist a boot)
Have fun!

Well done. Works perfect.

The are no files any more

Links are dead

deleted

Evas0r said:
Battery draining after the process...
Is this xposed fault?
Click to expand...
Click to collapse
yes u have to flash another version

Did anyone try this on Nougat/Android 7?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
TWRP with this [RECOVERY]Revolution Recovery Android Nougat {15-12-16} Beta .9 in Nougat but anything I tried to flash failed.

Is there anything one can do to get Pokémon Go working while having all of these installed?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
Hey, man I've tested it on my Huawei P9-LITE B370 and it all works perfectly. To flash Magisk, you need this custom recovery (https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356)

this really helped me thanks

Helped me alot. Still, post is a bit old, so what I did on b380 version:
FLASH RECOVERY twrp-3.1.1-0-venus.img
FLASH KERNEL Elite+Kernel+for+P9+Lite+CxxB3xx+v10.1.zip
ROOT with Magisk-v13.0(96f8efc).zip
INSTALL busybox archive via recovery to /sbin (for me it installed on /system/xbin, still ok.)
REBOOT after each step
Finally works ! :good:

is this Magisk work on Huawei P9?

I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob

ThePrinoob said:
I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob
Click to expand...
Click to collapse
flash magisk v13

simo255 said:
flash magisk v13
Click to expand...
Click to collapse
Ok, I will test it!

I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?

ThePrinoob said:
I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?
Click to expand...
Click to collapse
enable magisk hide and see if usb debugging is enabled

simo255 said:
enable magisk hide and see if usb debugging is enabled
Click to expand...
Click to collapse
Okey thank you it worked.

Hey,
If I open the camera app or snpachat I cant make any picture so I have a blackscreen. What should I do? And in youtube or Instagram I cant see videos, they dont load and I also cant hear any sound.
Sorry for my bad english.

[BUG] Magisk refuses to install modules from repo (The zip is not a Magisk Module!)

I've had magisk installed since version 6, I've published some magisk modules already and never had a problem until today.
After a full clean reinstall of Nougat NBD90Z (with wipe) on my Nexus 6 and then flashing Magisk, phh's superuser for magisk, installing phh's superuser apk from play store and magisk manager apk I stumbled upon a previously reported (without details) bug where magisk manager would refuse to install modules from repo claiming they are not magisk modules.
I've struggled trying everything I could including the full wipe (more details here: http://forum.xda-developers.com/apps/magisk/module-app-systemizer-t3477512/69230448#69230448) and bounced some ideas off @pnwsr6 who's had the similar problem on Nexus 6 device.
I've achieved a partially working Magisk Manager (manual installs of ZIP files work, but installs from repo still fail) and here's the list of steps which lead to me having semi-working magisk manager again:
1. I flashed ZIP files of some modules in twrp (I'm attaching App Systemizer and Nexus 6 LED Enabler which I flashed)
2. After the phone booted up I saw the modules active and working
3. Within Magisk Manager I then added the ZIP file of the phh's superuser module from that thread (http://forum.xda-developers.com/attachment.php?attachmentid=3893967&d=1475554052)
4. Now at least manual installation of modules within Magisk Manager are working fine.
@topjohnwu -- I've enabled verbose logging and extra logging for bash commands, but I'm still not seeing anything in the log on top of the regular output.

Created an issue against Magisk Manager so it's easier to track for developers: https://github.com/topjohnwu/MagiskManager/issues/20

Looks like that even after flashing some modules in twrp, Magisk Manager only allows to install from zip only exactly the same ZIP I've already flashed (even a minor change and bump of versionCode results in "This ZIP is not a Magisk Module!"). So it might be an issue of Magisk Manager being unable to write to /magisk despite having storage permission and being granted root access.

Well, it works now (you'll have to wipe again). So here's the sequence of events:
1. Flashed @RatchetPanda's busybox http://forum.xda-developers.com/attachment.php?attachmentid=3850579&d=1471875389 from twrp -- got stuck on a boot animation, rebooted again in twrp, flashed magisk uninstall and it didn't help for some reason.
2. So I force-rebooted into fastboot and flashed nbd90z with wipe.
3. After apps were restored and everything was set up, I booted into twrp (it didn't even ask me if I want to allow /system modifications for some reason), added magisk v8 and phh's r259 root to the list, flashed them both.
4. Once the phone booted I could again install modules from repo/zips.
Maybe something didn't get properly wiped first two times but it's working now @pnwsr6!

I've seen this error as well on my Nexus 6 NBD90Z with Magisk v8. Started with v7 after some heavy modification on my part .
I was sometimes able to fix it by simply extracting the zip and then Magisk Manager would somehow recognize it as a module.. Other times I could extract the zip and then re-archive the contents and Magisk Manager would recognize that as a module. Weird, but doable.

stangri said:
Well, it works now (you'll have to wipe again). So here's the sequence of events:
1. Flashed @RatchetPanda's busybox http://forum.xda-developers.com/attachment.php?attachmentid=3850579&d=1471875389 from twrp -- got stuck on a boot animation, rebooted again in twrp, flashed magisk uninstall and it didn't help for some reason.
2. So I force-rebooted into fastboot and flashed nbd90z with wipe.
3. After apps were restored and everything was set up, I booted into twrp (it didn't even ask me if I want to allow /system modifications for some reason), added magisk v8 and phh's r259 root to the list, flashed them both.
4. Once the phone booted I could again install modules from repo/zips.
Maybe something didn't get properly wiped first two times but it's working now @pnwsr6!
Click to expand...
Click to collapse
I probably won't try again until next update, and hope the wipe just wasn't clearing something. I have the zip installed through twrp and working for now so I'm good till then.

just wondering if you're still having this issue with v9? I had modules installed fine under v6, but never really installed any modules under v8 to see if this problem occurred for me. now that I'm on v9, which has been wiped clean to start, I can no longer install any modules via Downloads or in the Modules section... any suggestions?

I have the same issue when trying to install viper with v9 on Nexus 6P DP2
Skickat från min Nexus 6P via Tapatalk

Same here. Find a fix ?

From what I hear, ZIP/module management has been reworked in the upcoming magisk v10, so unless you want to go the route I went thru, you can just wait for that.

stangri said:
From what I hear, ZIP/module management has been reworked in the upcoming magisk v10, so unless you want to go the route I went thru, you can just wait for that.
Click to expand...
Click to collapse
Just an FYI, I do still have this problem, but can install the zip through twrp. Maybe 10 will be the solution.

I had the same problem, I cleared magisk manager data and it works fine now

Didn't help
Sent from my SM-G532F using Tapatalk

I've published snapshot builds of magisk v10 and magisk manager v2.6, try these together to see if they'd help.

stangri said:
I've published snapshot builds of magisk v10 and magisk manager v2.6, try these together to see if they'd help.
Click to expand...
Click to collapse
I tried the latest one from the 26th, magisk manager keeps crashing when trying to install the downloaded dialer/contacts on HTC 10.

Meowdib said:
I tried the latest one from the 26th, magisk manager keeps crashing when trying to install the downloaded dialer/contacts on HTC 10.
Click to expand...
Click to collapse
Weird, do you have the same problem with magisk manager 161223?

stangri said:
Weird, do you have the same problem with magisk manager 161223?
Click to expand...
Click to collapse
Same

I need a Help to download modules using magisk
Lastest version, Included phh root, manager is from G. play,
But Modules download function is not working
Say "No modules found" for download to install via magisk.

LineageOS Viper4Android

Did anyone of you got Viper4Android working on the unified builds of LineageOS for the 3T? And if so could you explain how? I tried the flashable zips of Viper4Arise but the driver was unsupported everytime and when i installed the Viper apk, installed the drivers and rebooted the app asked me again to install drivers and so on.
Thanks in advance

mittey68 said:
Did anyone of you got Viper4Android working on the unified builds of LineageOS for the 3T? And if so could you explain how? I tried the flashable zips of Viper4Arise but the driver was unsupported everytime and when i installed the Viper apk, installed the drivers and rebooted the app asked me again to install drivers and so on.
Thanks in advance
Click to expand...
Click to collapse
Install Magisk as your root solution, not SuperSU and install the module for Viper from the "downloads" section of the Magisk Manager (you will need to update Magisk Manager from play store). Reboot. After reboot, get a root file explorer and follow the instructions here: https://forum.xda-developers.com/oneplus-3t/themes/v4a-fix-processing-using-magisk-t3572819
Reboot Again. Then download the official Viper APK from: http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip (official link is from http://vipersaudio.com/blog/?page_id=48) and install it.
Done
I would clean install your rom to get rid of any existing system installs of Viper4arise or similar though. Dirty Flash should also work. @mittey68

manor7777 said:
Install Magisk as your root solution, not SuperSU and install the module for Viper from the "downloads" section of the Magisk Manager (you will need to update Magisk Manager from play store). Reboot. After reboot, get a root file explorer and follow the instructions here: https://forum.xda-developers.com/oneplus-3t/themes/v4a-fix-processing-using-magisk-t3572819
Reboot Again. Then download the official Viper APK from: http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip (official link is from http://vipersaudio.com/blog/?page_id=48) and install it.
Done
I would clean install your rom to get rid of any existing system installs of Viper4arise or similar though. Dirty Flash should also work. @mittey68
Click to expand...
Click to collapse
Worked! Thanks man

mittey68 said:
Worked! Thanks man
Click to expand...
Click to collapse
Anytime! Can't take credit for the original find though

Strange Magisk installation behaviour

Hi guys.
I'm facing an issue with Magisk (stable and beta) that I never had before. I'm on OP5, PixelExperience, Android Pie (but I've tried also on a Oreo ROM yesterday, not sure if it was stable or beta version of Magisk). Here's the flash routine I do for every single ROM:
- Wipe everything, internal storage included
- Flash ROM
- Flash Magisk
- Boot
In the past few days, Magisk isn't installing MM, don't know why. It always installed MM on every single flash I did in my life, now suddenly it isn't installing it anymore. I haven't changed my flashing "habits", I do the exact steps I wrote above on every single flash (not on updates, of course).
This issue also leads to not being able to install modules from MM, but I can install them via TWRP (I've got the latest blu_spark, I'm decrypted, flashed no_verity_v2 for OP5). When I install modules via MM it says:
! /data/adb/magisk_merge.img mount failed.
I tried re-installing Magisk, using the uninstaller and then first time the stable, then the beta, but they won't installing MM after flashing.
What do you guys think?
Thanks.
EDIT: I've recreated the issue, I've attached the log. I tried 2 different modules, Sysconfig Patcher and Busybox. The first one is installing only via TWRP (via MM it produces the log in the attachments), the second one is istalling via MM correctly.

"update-binary: line 203: make_ext4fs: not found"
Unable to format the .IMG to ext4 it seems so there's no magisk merge image to be mounted
Not entirely sure where to go with that but it could be a start.
Bad version of twrp?

If I understand you correctly, the Busybox module install just fine, no matter if installed through the Manager or TWRP.
Have you tried other modules?
The Sysconfig Patcher module isn't using the official module template, so it's very likely that @VR25 need to fix something in his install script.

Didgeridoohan said:
If I understand you correctly, the Busybox module install just fine, no matter if installed through the Manager or TWRP.
Have you tried other modules?
The Sysconfig Patcher module isn't using the official module template, so it's very likely that @VR25 need to fix something in his install script.
Click to expand...
Click to collapse
Indeed, there's stuff to "fix". I've been working on that for a few days now. I noticed [some] recent ROMs lack a bunch of useful binaries, such as make_ext4fs and resize2fs. So, I'm migrating to Magisk Module Template and relying on Magisk's util_functions.sh for better "future-proof" compatibility.

Didgeridoohan said:
If I understand you correctly, the Busybox module install just fine, no matter if installed through the Manager or TWRP.
Have you tried other modules?
The Sysconfig Patcher module isn't using the official module template, so it's very likely that @VR25 need to fix something in his install script.
Click to expand...
Click to collapse
I tried YTVanced module, downloaded via MM and it installed just fine. So I think that, as VR25 said, the ROMs I've tried these days might have lacked of those utilities. So we might have "solved" this issue.
And what about the fact that flashing Magisk from TWRP doesn't install MM? Is it also related to the fact that those ROMs are recent?

Pipodi93 said:
And what about the fact that flashing Magisk from TWRP doesn't install MM? Is it also related to the fact that those ROMs are recent?
Click to expand...
Click to collapse
That happens once in a while, and may very well be ROM related. Fortunately, it's easy to install manually...

Didgeridoohan said:
That happens once in a while, and may very well be ROM related. Fortunately, it's easy to install manually...
Click to expand...
Click to collapse
Yeah, I thought so too. Because when I was on AICP, MM was installed after flashing. My concern was that "mount failed" was related to the fact that MM wasn't installed during the flashing operation, but I'm glad to see that's not the case and my phone isn't cursed. Thank you!

[TOOL] Magisk Module Manager for recovery v2.5 (Magisk 19)

Since mm isn't working on new Magisk 19, I took it for inspiration and created a simple manager, just for bypass some "bootlooper" module.
Just install it using recovery and run on terminal /data/media/magisk.
v1.0 - Initial build. Enabling and disabling functions
v2.0 - Added module removal function
v2.5 - No need to use storage to work. May avoid issues. Some others minor changes.
All thanks to
- topjonhwu for Magisk
- VR25 for mm
- TWRP team
- Me? Idk

Great work dev[emoji106], thanks

doesn't works for me (doesn't list modules)

mrhamed said:
doesn't works for me (doesn't list modules)
Click to expand...
Click to collapse
To list modules the script needs to write on /cache or /data. It will choose by itself.
Please send some screenshot of issue.

Looks very promising, especially enjoy having a GUI for this.

mrhamed said:
doesn't works for me (doesn't list modules)
Click to expand...
Click to collapse
I'm working to make script use no external files, so script will depends completely on your recovery binaries.
Hope to release it soon.

I suffer a boot freeze because of a bad module.
Cannot use TWRP and don't have module like Magisk Core Only installed.
I cannot boot to rooted system because of bad module.
Can boot non-rooted system only.
For my device LYA (Mate 20 Pro) which for rooting is using root-through-recovery-boot I can patch boot image with whatever Magisk edition which I assume is the best way to recover the device without full wipe.
Can a Magisk version be easily built which will either skip loading custom modules or delete them during boot? After successfully booting rooted I would flash a standard Magisk.

mikeos said:
I suffer a boot freeze because of a bad module.
Cannot use TWRP and don't have module like Magisk Core Only installed.
I cannot boot to rooted system because of bad module.
Can boot non-rooted system only.
For my device LYA (Mate 20 Pro) which for rooting is using root-through-recovery-boot I can patch boot image with whatever Magisk edition which I assume is the best way to recover the device without full wipe.
Can a Magisk version be easily built which will either skip loading custom modules or delete them during boot? After successfully booting rooted I would flash a standard Magisk.
Click to expand...
Click to collapse
I don't know if I got it correctly.
Well... commonly modules won't survive after Magisk removal.
If you can't access TWRP for flash Magisk uninstaller or disable the problematic module, you can try to flash or even boot the ROM's stock kernel through fastboot.
But if such module did others modifications into data, so you'll have to reflash whole ROM.

Are you planning on publishing this on magisk repo?

This has saved my bacon at least 4 times since installing it, many thanks Adriano

Saved me from bootloop module, works like a charm!

Adriano-A3 said:
Since mm isn't working on new Magisk 19, I took it for inspiration and created a simple manager, just for bypass some "bootlooper" module.
Just install it using recovery and run on terminal /data/media/magisk.
v1.0 - Initial build. Enabling and disabling functions
v2.0 - Added module removal function
v2.5 - No need to use storage to work. May avoid issues. Some others minor changes.
All thanks to
- topjonhwu for Magisk
- VR25 for mm
- TWRP team
- Me? Idk
Click to expand...
Click to collapse
It gives me the error "WTF?! The directory was here just now! It's gone! Please try again... Exiting..."

Thx bro, you saved my day

PixelHead0_0 said:
It gives me the error "WTF?! The directory was here just now! It's gone! Please try again... Exiting..."
Click to expand...
Click to collapse
Same here, on Samsung S10+ with August update, latest Magisk and Twrp.

very useful for android 10, thank you sir !

I can't understand how to run it on the terminal

will it work with Magisk 20.0??

Sivabalan said:
will it work with Magisk 20.0??
Click to expand...
Click to collapse
have you tried it? does it work on magisk 20.1

Confirmed working with Magisk 20.1, thanks a ton for this!

working on 20.2 + android 10