Related
Manual how to apply patches android, for those who do not get it in the standard way. News for firmware based CM11, KitKat, 4.4.4 and others...
We will need 1 ) Root Explorer or another file manager. 2 ) Lucky Patcher.
And so, we go through the Root Explorer to system/framework and look there for a couple of files with names core.jar and services.jar, found means to copy to SD card for further action with them.
Go to Lucky Patcher and select the function to "Rebuild and install". We are looking for in the open filemanager copied our files, click on each of them and choose the function "Patch file firmware", patched both files close Lucky Patcher.
Open Root Explorer find our patched copy and rename them from the core-patched.jar in the core.jar, and so did a services-patched.jar in services.jar.
Put them in the firmware in two ways.
The first :
Through the Root Explorer to replace the first system/framework file core.jar and put it right (rw-r - r--).
Reboot and look at the first two Lucky Patcher android patch applied. Good!!!
Replace the same in system/framework file services.jar and the phone itself will go into a reboot may reboot itself again, nothing wrong with that.
Go through the Root Explorer on the road system/framework to the file services.jar and give him the right to (rw-r - r--).
Watch in Lucky Patcher all three patch applied android.
The second method:
For him, we need the establishment of recovery TWRP or CWM and Aroma Filemanager. Earnest request before to do something, then test Aroma FM on your device !!!
We go in and start recovery Aroma Filemanager. After that, everything just as in Root Explorer, substitute core.jar on patched us exhibiting rights (rw-r - r--) and reboot.
Again in recovery and launch Aroma Filemanager. And substitution of services.jar but rights can and should be put immediately (rw-r - r--).
Reboot and you're done.
One piece of advice if something goes wrong as we would like it keep copies non patching core.jar and services.jar.
You can always get them back into place and put right through Aroma Filemanager.
Addition to those who have odex firmware :
In odex firmware need to copy the core.odex and sevices.odex on sdcard.
Go to Lucky Patcher, and on the bottom panel to select "Install and rebuild".
Then, select a file core.odex and select to patch the firmware file, then select services.odex and also choose to patch the firmware file, then rename and put them back into the system/framework.
Ms_Julia said:
Manual how to apply patches android, for those who do not get it in the standard way. News for firmware based CM11, KitKat, 4.4.4 and others
Click to expand...
Click to collapse
Why patch these files?
AXDFREEDOM said:
Why patch these files?
Click to expand...
Click to collapse
To disable signature verification in the package manager.
AXDFREEDOM said:
Why patch these files?
Click to expand...
Click to collapse
...
Ms_Julia said:
...
Click to expand...
Click to collapse
Which ROM you now use??
No need to patch this files, because you can install paid apps from google without this, playstore dont chech it for verificatio, better leave this files alone, I dont know how to say. Xd
You dont need to patch anything.
And if you dont know Lucky patcher is illegal on xda.
Your guide is good
But, that dont need to do.
Paget96 said:
Which ROM you now use??
No need to patch this files, because you can install paid apps from google without this, playstore dont chech it for verificatio, better leave this files alone, I dont know how to say. Xd
You dont need to patch anything.
And if you dont know Lucky patcher is illegal on xda.
Your guide is good
But, that dont need to do.
Click to expand...
Click to collapse
Thank you, I know it. But sometimes it is necessary for example to amend the application to the best of his work. And to set it is necessary to use patches to disable signature verification.
Ms_Julia said:
Thank you, I know it. But sometimes it is necessary for example to amend the application to the best of his work. And to set it is necessary to use patches to disable signature verification.
Click to expand...
Click to collapse
That can make problems in ROM, that is maybe good with some apps, but I dont know which app need this??
Paget96 said:
That can make problems in ROM, that is maybe good with some apps, but I dont know which app need this??
Click to expand...
Click to collapse
I think u don't need to use these patches. As u said they lead to illegal activities. I have no key problems they cause only help with all applications. Because I have a direct hands. How well do u know the android ?
Ms_Julia said:
I think u don't need to use these patches. As u said they lead to illegal activities. I have no key problems they cause only help with all applications. Because I have a direct hands. How well do u know the android ?
Click to expand...
Click to collapse
I know pretty much, but I dont know anythig about coding.
Paget96 said:
I know pretty much, but I dont know anythig about coding.
Click to expand...
Click to collapse
U know the only thing is the top of android. But the essence of not even examined, it's clear that u are not a programmer or developer. Just once again I say to u for u my user guide is useless , unless u want to learn everything. And to know a lot more than it is now at the moment.
Ms_Julia said:
U know the only thing is the top of android. But the essence of not even examined, it's clear that u are not a programmer or developer. Just once again I say to u for u my user guide is useless , unless u want to learn everything. And to know a lot more than it is now at the moment.
Click to expand...
Click to collapse
I dont understand you.
Paget96 said:
I dont understand you.
Click to expand...
Click to collapse
These patches are needed for a more complete control over the android. Do you understand now?
Big thanx for this great tutorial,its very usefull.but one request i have about patching with lucky.maybe its possible to patch the service.jar for full tweaking like v6 supercharger etc. As we know zeppelinrox is working on it and we can do it by hand with very anoying smalipatches one by one,so maybe its possible to make it with luckypatcher too?
GREETZ FROM TEAM-OPTIMA!!!
NmAa said:
I guess what she's trying to impost is that we must own our phone because it's ours not Google and we must live in our own...
#LG #P705
#RECOVERY: TWRP 2.6.3.0/P700
#ROM:CM11/IMER
Click to expand...
Click to collapse
YES!!! :thumbup:
-CALIBAN666- said:
Big thanx for this great tutorial,its very usefull.but one request i have about patching with lucky.maybe its possible to patch the service.jar for full tweaking like v6 supercharger etc. As we know zeppelinrox is working on it and we can do it by hand with very anoying smalipatches one by one,so maybe its possible to make it with luckypatcher too?
GREETZ FROM TEAM-OPTIMA!!!
Click to expand...
Click to collapse
Did not think about it yet, but ask the creator of the LP.
Ms_Julia said:
Manual how to apply patches android, for those who do not get it in the standard way. News for firmware based CM11, KitKat, 4.4.4 and others...
.
Click to expand...
Click to collapse
thank you for this i been working hard trying to get this ported for the nexus 7 2013 "flo" now its patched and working. i tryed to manually edit services.jar my self but resulted in a billion force closing apps. now i am able to sign my apps and they boot p.s this post has been the most helpful than any others
i cant patch the copied files (core.jar and services.jar ) in SD card plz help...!!
Ms_Julia said:
Manual how to apply patches android, for those who do not get it in the standard way. News for firmware based CM11, KitKat, 4.4.4 and others...
We will need 1 ) Root Explorer or another file manager. 2 ) Lucky Patcher.
And so, we go through the Root Explorer to system/framework and look there for a couple of files with names core.jar and services.jar, found means to copy to SD card for further action with them.
Go to Lucky Patcher and select the function to "Rebuild and install". We are looking for in the open filemanager copied our files, click on each of them and choose the function "Patch file firmware", patched both files close Lucky Patcher.
Open Root Explorer find our patched copy and rename them from the core-patched.jar in the core.jar, and so did a services-patched.jar in services.jar.
Put them in the firmware in two ways.
The first :
Through the Root Explorer to replace the first system/framework file core.jar and put it right (rw-r - r--).
Reboot and look at the first two Lucky Patcher android patch applied. Good!!!
Replace the same in system/framework file services.jar and the phone itself will go into a reboot may reboot itself again, nothing wrong with that.
Go through the Root Explorer on the road system/framework to the file services.jar and give him the right to (rw-r - r--).
Watch in Lucky Patcher all three patch applied android.
The second method:
For him, we need the establishment of recovery TWRP or CWM and Aroma Filemanager. Earnest request before to do something, then test Aroma FM on your device !!!
We go in and start recovery Aroma Filemanager. After that, everything just as in Root Explorer, substitute core.jar on patched us exhibiting rights (rw-r - r--) and reboot.
Again in recovery and launch Aroma Filemanager. And substitution of services.jar but rights can and should be put immediately (rw-r - r--).
Reboot and you're done.
One piece of advice if something goes wrong as we would like it keep copies non patching core.jar and services.jar.
You can always get them back into place and put right through Aroma Filemanager.
Addition to those who have odex firmware :
In odex firmware need to copy the core.odex and sevices.odex on sdcard.
Go to Lucky Patcher, and on the bottom panel to select "Install and rebuild".
Then, select a file core.odex and select to patch the firmware file, then select services.odex and also choose to patch the firmware file, then rename and put them back into the system/framework.
Click to expand...
Click to collapse
i cant patch the copied files (core.jar and services.jar ) in SD card plz help...!!
it says a warning
the file ".jar" doesnt contain classes.dex for patch . try patch ".odex" file for this ".jar" file
what to do..?? plz help
Prem_414 said:
i cant patch the copied files (core.jar and services.jar ) in SD card plz help...!!
it says a warning
the file ".jar" doesnt contain classes.dex for patch . try patch ".odex" file for this ".jar" file
what to do..?? plz help
Click to expand...
Click to collapse
Do exactly what the error said. Also are you deodexed? I was able to patch this my self on nexus 7 and my s3 touchwiz.
Sent from my SGH-T999 using XDA Free mobile app
Android 5.0.2
there are this cores...
miguelrivas said:
Android 5.0.2
there are this cores...
Click to expand...
Click to collapse
I'm not sure if the signing is the same way for lollipop as in 4.4 and below I have tried it but it didn't work. You can try and see but you will only have art core to use your os doesn't support davlik anymore
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Hi devs,
Now I want to create a magisk module which replaces the functionalities of a system app. Consider for example, I'm running a custom ROM which I built and I have the complete source of the ROM. After the ROM is built and flashed, I want to change the functionality of an app using Magisk. Now after making the changes which I need, I build that and get the new APK file along with its odex and vdex files.
Now without replacing the files in the system partition, can I use magisk to use the updated apk instead of the old apk. If that is possible, can anyone give me some quick steps how to do it.
@Rajeev @sooti - I think you can help me coz you've been making some magisk modules for Mi A1.
Or anyone else who knows this, kindly help me.
Uvneshkumar said:
Hi devs,
Now I want to create a magisk module which replaces the functionalities of a system app. Consider for example, I'm running a custom ROM which I built and I have the complete source of the ROM. After the ROM is built and flashed, I want to change the functionality of an app using Magisk. Now after making the changes which I need, I build that and get the new APK file along with its odex and vdex files.
Now without replacing the files in the system partition, can I use magisk to use the updated apk instead of the old apk. If that is possible, can anyone give me some quick steps how to do it.
@Rajeev - I think you can help me coz you've been making some magisk modules for Mi A1.
Or anyone else who knows this, kindly help me.
Click to expand...
Click to collapse
If you use Magisk v15.3 and want only change APK file put to system/app if you want change on this partition if you have in system/priv You must do it that same but you must mount this and then after flash in Magisk you have new APK. Meybe some one write that same. I create mod but only mount APK file in system/app because I don't have there this file. Try flash, check it work and then you can share with all
chudy_85 said:
If you use Magisk v15.3 and want only change APK file put to system/app if you want change on this partition if you have in system/priv You must do it that same but you must mount this and then after flash in Magisk you have new APK. Meybe some one write that same. I create mod but only mount APK file in system/app because I don't have there this file. Try flash, check it work and then you can share with all
Click to expand...
Click to collapse
OK. Will try that.
Uvneshkumar said:
Hi devs,
Now I want to create a magisk module which replaces the functionalities of a system app. Consider for example, I'm running a custom ROM which I built and I have the complete source of the ROM. After the ROM is built and flashed, I want to change the functionality of an app using Magisk. Now after making the changes which I need, I build that and get the new APK file along with its odex and vdex files.
Now without replacing the files in the system partition, can I use magisk to use the updated apk instead of the old apk. If that is possible, can anyone give me some quick steps how to do it.
@Rajeev @sooti - I think you can help me coz you've been making some magisk modules for Mi A1.
Or anyone else who knows this, kindly help me.
Click to expand...
Click to collapse
You should refer to the official documentation of Magisk to understand the structure of a Magisk module, once you understood it well, you can make highly customizable Magisk mods without needing to use topjohnwu's template.
For the case you asked about, you can simply create a flashable shell zip, which will create a structure something similar to this,
Code:
MOUNTPOINT=/sbin/.core/img
MODID=your_mod_id_here
--> MOUNTPOINT
--> MODID
--> auto_mount
--> module.prop
--> system
--> {priv-,}app
--> app_name.apk
--> app_name.{o,v,}dex
--> etc/permissions/package_name-permissions.xml
--> service.sh
--> post-fs-data.sh
Using topjohnwu's template will be much simpler, boot scripts are optional, the perms XML is also needed only if (priv-app && API >= 26)
EDIT: Almost forgot it, thanks for providing our Le Max 2 an Oreo ROM!
Uvneshkumar said:
Hi devs,
Now I want to create a magisk module which replaces the functionalities of a system app. Consider for example, I'm running a custom ROM which I built and I have the complete source of the ROM. After the ROM is built and flashed, I want to change the functionality of an app using Magisk. Now after making the changes which I need, I build that and get the new APK file along with its odex and vdex files.
Now without replacing the files in the system partition, can I use magisk to use the updated apk instead of the old apk. If that is possible, can anyone give me some quick steps how to do it.
@Rajeev @sooti - I think you can help me coz you've been making some magisk modules for Mi A1.
Or anyone else who knows this, kindly help me.
Click to expand...
Click to collapse
how to create fps unlocker of pubg game in magisk module.
I have a rooted Samsung SM-N960F/DS. Flashed Detonator to get Tmobile features.
Now i have the annoying Tmobile boot animation.
I cant find the bootanimation.zip file though. The only files in the system/media are boot ogg files, which i can NOT delete/rename.
What should i do if i want NO boot animation?
My phone is rooted using MAGISK.
But i just noticed I can NOT change anything in the file explorer. Do i need to install SuperSU?
It doesn't even ask me permission to GRANT root permission to the file explorer (RomToolbox).
What is wrong? Please help.
Ok, I found a solution.
SuperSu was disabled in Magisk because I had installed Xposed. So, I installed the "No Device Check" module in Xposed. This activated SuperSu again in Magisk.
Next, i reinstalled RomToolbox.
Detonator had installed Tmobile boot/shutdown media files in a different folder. I found the boot/shutdown files in /system/omc/TMB/res/media. I renamed the the media folder to "media1" (I suppose I could have also deleted the files, but whatever). This reverted the boot/shutdown animation back to the stock/default files!!!
Hope this helps someone out there.
i didnt think there was exposed by original dev for mote 9,??do you have oreo or pie rom?
I am rooted with Busybox installed via magisk. SU root check was done and i am rooted for sure. However i cannot seem to modify the build.prop file. Can anyone advice please
Install Solid Explorer and try again edit with this file explorer
Trevorek said:
Install Solid Explorer and try again edit with this file explorer
Click to expand...
Click to collapse
Good looking app however it can not copy the cache to the system/build.prop.
In other words, it can not save changes like everything else
FKX1997 said:
Good looking app however it can not copy the cache to the system/build.prop.
In other words, it can not save changes like everything else
Click to expand...
Click to collapse
i had this problem with new version of magisk (23 beta+)
now i use older version ,everything work fine (full control on system files)
(i use mixplorer)
loopypalm said:
i had this problem with new version of magisk (23 beta+)
now i use older version ,everything work fine (full control on system files)
(i use mixplorer)
Click to expand...
Click to collapse
Which version are you using please
Update, checked my root and it is all working as it should be, yet i can not write to system. I have access to ADB but i need to add "ro.debuggable=1" to build.prop to do more work on the phone
FKX1997 said:
Which version are you using please
Click to expand...
Click to collapse
right now i use 21.1
loopypalm said:
right now i use 21.1
Click to expand...
Click to collapse
Just add the prop edit to a magisk flashable zip
In magisk flashable zip empty go to common/system.prop edit with text editor and add the prop you want to change then flash zip
toolhas4degrees said:
Just add the prop edit to a magisk flashable zip
In magisk flashable zip empty go to common/system.prop edit with text editor and add the prop you want to change then flash zip
Click to expand...
Click to collapse
Too many things to just edit a prop ...
plus the prop was not the only problem i got, i could not write to some folders in system
i think he fixed the problem in 24 ,but i'll keep using 21.1 anyway ...
loopypalm said:
Too many things to just edit a prop ...
plus the prop was not the only problem i got, i could not write to some folders in system
i think he fixed the problem in 24 ,but i'll keep using 21.1 anyway ...
Click to expand...
Click to collapse
Really it's not to many things it literally takes 20 seconds. I know the issue. And the dynamic part one are mainly it. That's why I suggested what I told you.
toolhas4degrees said:
Really it's not to many things it literally takes 20 seconds. I know the issue. And the dynamic part one are mainly it. That's why I suggested what I told you.
Click to expand...
Click to collapse
I think he'd rather take the chance of boot looping your advice was the best so far
loopypalm said:
Too many things to just edit a prop ...
plus the prop was not the only problem i got, i could not write to some folders in system
i think he fixed the problem in 24 ,but i'll keep using 21.1 anyway ...
Click to expand...
Click to collapse
Sadly the issue persists and i haven't made a magisk module before so i may need some help on that one please
I added it to the cloudflare 2.7 zip, i expect i shouldn't see it in the build.prop still but it would be loaded in memory? as i have it in the build.prop, the line i wish to have but set to 0 when i have set it to 1 on the system.prop file
(to clarify the line was in the build,prop by stock set to 0)
I have an LG V60 phone and I would like to put the phone in "high impedance mode" all the the time for more power to the earphones even if they are less than 50 ohm impedance.
In LG V40/50, it was very simple by rooting the phone and making some modifications in the one of the files that was in the "vendor/etc" directory. The problem with LG V60 is it does not allow any write access to the vendor folder at all.
So the only feasible option that I can think of is to create a Magisk module that replaces the original file with the modified one. My biggest disadvantage is not knowing anything about writing codes including Magisk module ones. So I was wondering if anyone could create a Magisk module that would replace the original file through Magisk?
ADDTIONAL INOFRMATION:
I am running Magisk 25 on a fully rooted LG V60.
The file that needs to be changed is mixer_paths.xml and it resides in the "vendor/etc" folder. I have created the modified file.
So if someone is able to develop a module to accomplish this, I will place the modified file in the "system/vendor/etc" folder of the Magisk module, as I understand it.
Many thanks for your support!
You can use this template system in future as its super easy
The template itself is here
GitHub - Zackptg5/MMT-Extended: Magisk Module Template Extended
Magisk Module Template Extended. Contribute to Zackptg5/MMT-Extended development by creating an account on GitHub.
github.com
click the Code button, then download zip
then extract the zip into a folder and rename the folder "MMT-Extended-master" to the something more meaningful, like the name of your module
Read the wiki and docs here to go step by step to create your first module:
Home
Magisk Module Template Extended. Contribute to Zackptg5/MMT-Extended development by creating an account on GitHub.
github.com
Notably the heading:
How do I make a MMT Extended mod?
The steps for a simple file addition/replacement module, which are simple, should be steps 1-4, then 8. Then zip up the modules (as a zip) and test.
For you, if you read along (in Step 3) you will need to create a folder vendor, under the existing system one, and then a further etc folder under vendor, and put the necessary file (mixer_paths.xml in there.
If you try and fail, post back and someone will assist. But we prefer people to at least read the documentation and try first, ideally...this is the way the great didgeridoohan mentored myself and many others, he was not big on spoonfeeding
Imagine the satisfaction you might get finding out youre capable of such feats...i promise its not rocket surgery
Feel free to PM even, if you get stuck and think you have a silly question - of course knowing me, and i do, you'll probably get an even sillier, and off topic answer as well...
hint: you can knock out this basic module in far far less time than it took me to write all this
Thank you!
So my changes look like this:
1. Put the modified file in the system/vendor/etc folder of the Magisk module.
2. Made the needed changes to the customize.sh as attached.
Royaltiger said:
Thank you!
So my changes look like this:
1. Put the modified file in the system/vendor/etc folder of the Magisk module.
2. Made the needed changes to the customize.sh as attached.
Click to expand...
Click to collapse
Yes, though you'll need to uncomment (remove the leading #) from the set_perm lines to make them active, also you only really need the 2nd one
Royaltiger said:
Thank you
73sydney said:
Yes, though you'll need to uncomment (remove the leading #) from the set_perm lines to make them active, also you only really need the 2nd one
Click to expand...
Click to collapse
Click to expand...
Click to collapse
So I made the module with the suggested changes in customize.sh and put the modified mixer_path.xml file in the system/vendor/etc folder of the module. Module installs fine with Magisk but when it reboots, the device hangs on the initial LG screen and does not go anywhere from there.
I am attaching the customize.sh snapshot. Also, attached is the module file.
See here under "Disabling/uninstalling modules manually" if youre not able to boot
Module Issues:Magisk and MagiskHide Installation and Troubleshooting guide
www.didgeridoohan.com
I am assuming that it is not possible to accomplish what I wanted to achieve.
Royaltiger said:
I am assuming that it is not possible to accomplish what I wanted to achieve.
Click to expand...
Click to collapse
mixer_paths files have been replaced for years, long before magisk even...i did it back as far as the Galaxy S2 from memory, so im not sure why this didnt work for you, was the mxer_paths file specifically for your device? i have no clear idea why it hasnt worked for you
this thread has a guide to making /system RW, so you could manually copy the file and overwrite it, but id really consider how much you want to replace mixer_paths before i set out to do that
V60 Bootloader Unlock and Magisk Root
Earlier today I was alerted to https://www.cnblogs.com/yanhua-tj/p/15525593.html which has the actual firehose and steps to unlock! However it seems to be in Simplified Chinese so I'll translate it here for you. The firehose is attached below...
forum.xda-developers.com
73sydney said:
mixer_paths files have been replaced for years, long before magisk even...i did it back as far as the Galaxy S2 from memory, so im not sure why this didnt work for you, was the mxer_paths file specifically for your device? i have no clear idea why it hasnt worked for you
this thread has a guide to making /system RW, so you could manually copy the file and overwrite it, but id really consider how much you want to replace mixer_paths before i set out to do that
V60 Bootloader Unlock and Magisk Root
Earlier today I was alerted to https://www.cnblogs.com/yanhua-tj/p/15525593.html which has the actual firehose and steps to unlock! However it seems to be in Simplified Chinese so I'll translate it here for you. The firehose is attached below...
forum.xda-developers.com
Click to expand...
Click to collapse
Actually I had no problem in editing the mixer_tavil.xml file in LG V40/50. But when it comes to LG V60, the file is read-only. There is no way to edit it due to dynamic partition. Hence, I was seeking the only option available i.e., via Magisk module.
Royaltiger said:
Actually I had no problem in editing the mixer_tavil.xml file in LG V40/50. But when it comes to LG V60, the file is read-only. There is no way to edit it due to dynamic partition. Hence, I was seeking the only option available i.e., via Magisk module.
Click to expand...
Click to collapse
So, I encountered the same problem and found what you did wrong. I was able to write my own Magisk module and it works wonderfully. It took so much time to understand how to do it because there is no proper tutorial.
If you are still active and trying to know how to do it the right way, here comes the explanation:
The Replace = " /system/vendor/etc/ " must not be written as it completely wipes the actual folder from your phone. This is why you were not able to turn the phone on. It should be like this:
Replace = " " (That part must be blank)
The rest of the code is good. If you try it like this now, you will see it will work, just like mine did.
Cheers
Does not work. May I see your module? Please upload it here as attachment.
I even put my edited file under /data/adb/modules/<my directory>/system/vendor/etc. It shows up in Magisk as a module and the file loads (as it is not visible in file explorer) but there is no change in volume. So the thing is not working.