Database Develop

BA as car(pocket)pc

I've bought a used xv6600 off ebay which I'm going to convert to a carpc.
As a first time BA user, i have a few questions.
I have read the wiki/searched the forum, but I'm a bit mixed up and hence posting this thread.
installed versions on the phone:
model: PH20A2
ROM version: 1.36.00 WWE
ROM date 01/13/05
radio HA01_151
protocol AA.3.3.3.01
PRL 50619
extrom 1.36.116 WWE
hardware version 0041
a few notes:
- Its not going to be used as a phone as I can't register it with my local cellular provider (although they do support CMDA EVDO) - so I couldnt care less about if its radio works..
- Its going to be paired to a BT GPS from socket.
- the BA/xv6600 is going to be permanently mounted into the car (I'm still designing how, it would be in horizontal mode though).
- since It'll be permanently mounted, I won't (and couldnt) use the keyboard..
- audio out is going to be used to connect to an external speaker
- the BA will be charged from the car's 12v (always connected).
my questions are:
1) where could I find schematics for getting audio output (if exists), as well as where to connect the charge directly to the BA's connector.
I have only a cradle, no sync cable, which means I'd probably have to open up the BA and soldier directly, or get a connector...
2) should I connect audio out to the connector (if possible?) or the 2.5mm output on top of the device.. ?
3) I'd be interested in upgrading to WM5, I've read on the forums that it isn't possible on the CDMA versions because the radio doesnt work (or does it?). Since I don't care about the radio, could I install WM5 ? which ROM would be suitable for my BA model ?
awaiting your answers,
thanks!

Sounds like a neat project
ido said:
- the BA will be charged from the car's 12v (always connected).
Click to expand...
Click to collapse
Might be a bad idea...car batteries are designed to give out high power for short periods, not low constant drains. Personally I'd connect it to the ignition circuit so it's only powered when the ACC line is live. This will also turn it off for you after X minutes if you use the "auto-power off on batteries" function. It may even turn it on for you!
1) where could I find schematics for getting audio output (if exists), as well as where to connect the charge directly to the BA's connector.
I have only a cradle, no sync cable, which means I'd probably have to open up the BA and soldier directly, or get a connector...
2) should I connect audio out to the connector (if possible?) or the 2.5mm output on top of the device.. ?
Click to expand...
Click to collapse
The connector does have audio available. Buy a cable and hack it because if you mess it up you just buy another. Messing up the connector itself on the phone is more fatal. I think the schematic is on the wiki for the actual pin outs.
You might also find these useful:
http://wiki.xda-developers.com/index.php?pagename=Connectors
http://forum.xda-developers.com/archive/index.php/t-235616.html

yes after constant searching , i also found those threads.
Yet I'm wondering, some connectors don't include all 22 pins, but only the ones actually used for charging (for example) - and then it'll be really hard to hack them.
I guess i'll just have to hope I buy one that does have all 22 pins installed... unless you have other idea's for me.
Also, for the charger, you're right, I didn't mention that, but thats somewhat my intention.
Since the unit will be permanently mounted, I won't be able to sync it (unless I bring a laptop to my car) - could I somehow get a two SD cards installed at once to the unit ?

ido said:
yes after constant searching , i also found those threads.
Yet I'm wondering, some connectors don't include all 22 pins, but only the ones actually used for charging (for example) - and then it'll be really hard to hack them.
Click to expand...
Click to collapse
Yes, that's correct. If you get a charge & sync cable you'll have most. Might need to take audio from the 2.5mm jack in that case. That's probably the simplest solution if you cannot get a fully wired one. I'm interested in this sort of thing, so if you could post an update on what you go with I'd be grateful.
Since the unit will be permanently mounted, I won't be able to sync it (unless I bring a laptop to my car) - could I somehow get a two SD cards installed at once to the unit ?
Click to expand...
Click to collapse
I doubt you could get two SD cards. What may be possible is some sort of SD card extension device. Never seen one (never looked), but if it existed you could have a dash-mounted SD card.
Bluetooth or WiFi might help you e.g. with WiFi you could browse a network share to copy music over from your house. Also, there is a tool for WM5 that turns the phone into a keydrive, i.e. a USB mass storage device. Unless you need contacts etc sync'ed, that might be a bit simpler & give you more options to what you can hook up for.
PS bluetooth on WM5 isn't all that great. There is a "fix" that wakes the device now and then. This would light up your car overnight and might possibly be a thief magnet. On the other hand, if the battery dies on WM2003, you lose the data on it.

- At first I thought of making the device extractable, so I thought it'll be better to use the connector on the bottom for audio, but I've decided not to go this route (more complications and harder to make - also makes it easier for thieves.
So I'm probably going to go for the 2.5mm jack for audio.
- as for SD, since the SD slot won't be accessible, I thought of making an SD slot on the dashboard - and I'd like to switch between both.
an SD is connected via 9 pins, meaning making an SD switch is possible, but you wouldn't be able to use both.. thus I was wondering if software/hardware wise there is a builtin capabilty of such a thing as using two SD's at once. that'll be really cool.
- unfortunatly my XV6600 does not have WIFI, and BT is NOT an option for syncing (too slow !! - just imagine syncing 2gb of audio/vid via bluetooth..)
the two idea's I've had is making a USB connector on the dash (just incase I can get a laptop in the car..)
and the other, was the dash SD slot..
- for bluetooth, can't I just disable auto wakeup ?
- how will upgrading to WM5 save my data even if the battery drains ? its the same RAM chip's, not flash ROM, isn't that right ?
- as for HR's, the question is if I can somehow get the unit to 'working order' by installing software from the SD card, without actually syncing it to a computer..

fraser: Since I'm going to be connecting the ppc to the ignition circuit, and I'd also like to have a USB connector on the dashboard, I'd need to switch between the two.
i already have a car 12v connector -> usb charger device.
Should I buy a SYNC cable and convert it to charger, or car charger and convert it to USB cable ?
(although car charger might not have all the right pins..)

ido said:
thus I was wondering if software/hardware wise there is a builtin capabilty of such a thing as using two SD's at once. that'll be really cool.
Click to expand...
Click to collapse
Never heard of that I'm afraid. A switcher may work, but make sure there aren't any other physical switches that get tripped when you put a card in.
- for bluetooth, can't I just disable auto wakeup ?
Click to expand...
Click to collapse
No, this BT issue is the biggest one on WM5
- how will upgrading to WM5 save my data even if the battery drains ? its the same RAM chip's, not flash ROM, isn't that right ?
Click to expand...
Click to collapse
No, it's different ones. WM5 uses the "storage" area for your personal data; you now no longer have /storage as it's all in there. The RAM becomes proper RAM, although you can use some of it as a ramdisk with the same loss-of-power issues as WM2003.
- as for HR's, the question is if I can somehow get the unit to 'working order' by installing software from the SD card, without actually syncing it to a computer..
Click to expand...
Click to collapse
That's exactly what I do. I've stopped using the PC installers, there is enough junk on my PC. Just find the cabs for the apps and keep a copy on the SD card.

Not all apps have cabs.. so that might be a problem.
as well as I'll have to make pre-made .reg fixes just incase I'll have to HR.
as for WM5, if I install it, won't I have less free space then ?

ido said:
Not all apps have cabs.. so that might be a problem.
Click to expand...
Click to collapse
You can extract the cabs in various ways. Some exe's can even be opened in winrar.
as for WM5, if I install it, won't I have less free space then ?
Click to expand...
Click to collapse
You can reformat the storage area to 60 meg before the upgrade. Only before though. You don't get a memory slider like in WM2003.
Still, I'm not so sure on WM5 being the best for you. You'd want to have reliable BT and I'm not sure it is on WM5.

So I guess I'll stick with WM2003 for the time being.
I'm ordering an SD slot for the dashboard, as well as a USB connector.
Another Idea I've had is the need for the hardreset as well as reset button.
to which version should I upgrade my rom then ?

ido said:
- an SD is connected via 9 pins, meaning making an SD switch is possible, but you wouldn't be able to use both.. thus I was wondering if software/hardware wise there is a builtin capabilty of such a thing as using two SD's at once. that'll be really cool. ..
Click to expand...
Click to collapse
sorry to butt-in but, someone had done that before: SD-WiFi & SD Mem Card in parallel on the same 9 pin source: pda sd expansion.
a switch might be of help if you don't want to use the two slots simultaneously.

Yes I've seen that. Its a pretty lame hack if you read it to the end.
there's a better link with larger photo's for anyone interested:
http://homepage.ntlworld.com/david.hutchinson27/pockpc/
also, his project doesnt seem to work at the same time, and I've decided not to go with the switch route.
I'm reading a lot of the SD specs, So there is a very slim possibility I'll be able to get two cards to co-exist (and I would love some proffesional help if any of you guys know more about SD's then I do).
if not, then I'll just make an SD slot on the dashboard..

Usb mounting question

I tried searching, no dice. I tried asking in the tips and tricks thread, nobody answered, so I'll ask here. Is there a way to force the G1 into mass storage mode? I want to connect it to my car stereo via usb, but the radio won't detect it, so the G1 never gives me the option to mount. If I could force it into mass storage mode, I'm fairly sure it would connect. Is it a simple terminal command? All help is appreciated.

edit: sorry, misread post ><

I do this occasionally. What I found is that if I have "USB debugging" on in the phone settings the G1 doesn't detect the connection and give me the option to mount the sd card. If I turn it off, it immediately detects the connection.

I leave USB debugging off all the time. Anyone know how to force the SD card into mass storage mode like you could in RC28?

Dowload AnyCut from the market
create a new shortcut
activity
scroll down and pick SD card
the short cut should be on your desktop. I've tried this on my car stereo and couldn't get it to work. Let me know if you better luck

Yah my Pioneer FH-P8000BT hates my G1 USB no workie, just errors out after 20 seconds or so. Pioneer punted when I emailed them saying that they have no plans to update their support of devices with this head unit; bummer. At least receiving calls on it via BT works okay. Hoping with the full bluetooth stack to be released that the voicedialing app might actually revised to be worth a **** so that you can activate it via the stereo like my last phone. And also maybe contact transfer/sync might actually work for me
So close... so frustrating!
Would also love to see a solution to having the option to automount on USB connection, as per OP.

bitbybit said:
Yah my Pioneer FH-P8000BT hates my G1 USB no workie, just errors out after 20 seconds or so. Pioneer punted when I emailed them saying that they have no plans to update their support of devices with this head unit; bummer. At least receiving calls on it via BT works okay. Hoping with the full bluetooth stack to be released that the voicedialing app might actually revised to be worth a **** so that you can activate it via the stereo like my last phone. And also maybe contact transfer/sync might actually work for me
So close... so frustrating!
Would also love to see a solution to having the option to automount on USB connection, as per OP.
Click to expand...
Click to collapse
Did you uncheck the "USB DEBUGGING" in Development?

polaris0352 said:
I leave USB debugging off all the time. Anyone know how to force the SD card into mass storage mode like you could in RC28?
Click to expand...
Click to collapse
Sorry that doesn't work for you. Just for reference, the G1 recognizes and works with the usb port on the Dual XDM-6400BT just fine. The bluetooth works as well, but I assume all bluetooth capable decks will.

I have the G1 connected to my stereo but I use a converter that came with my diamond. Converts mini usb to stereo 3.5mm or 2.5mm headphone jack. That goes to the crossover which connects to the amp and I have my music without a head unit.
I stopped using the G1 and use my diamond because it comes with a equalizer which makes a noticable difference in sound between the two.

bwWing said:
Sorry that doesn't work for you. Just for reference, the G1 recognizes and works with the usb port on the Dual XDM-6400BT just fine. The bluetooth works as well, but I assume all bluetooth capable decks will.
Click to expand...
Click to collapse
I have the Dual but the one that doesn't have the BT. The G1 picks up the connection and the unit even looks for music file but say "NO FILES". How did you get yours to work?

saul972 said:
Did you uncheck the "USB DEBUGGING" in Development?
Click to expand...
Click to collapse
Yah, I've tried both ways; no difference unfortunately. Head unit shows "Format Read" for approx 20 seconds before giving me a "USB N/A" display and doing nothing.
Thus far I've heard of people having success with at least some Clarion and some Dual decks. I can't tell if the phone is to blame or the car stereo manufacturers... seems like obviously somebody isn't supporting the full USB Mass Storage spec properly, but hard to point the finger when the G1 works fine on my computer and the car stereo works fine with a USB thumbdrive. *shrug*

saul972 said:
I have the Dual but the one that doesn't have the BT. The G1 picks up the connection and the unit even looks for music file but say "NO FILES". How did you get yours to work?
Click to expand...
Click to collapse
I didn't have to do anything special to get it to work, it just worked the first time I plugged it in. I can tell you some more about my setup. I'm using a 4GB sandisk sd card in the phone. My music is all mp3 and in the path \music\[album name]\*.mp3.

bwWing said:
I didn't have to do anything special to get it to work, it just worked the first time I plugged it in. I can tell you some more about my setup. I'm using a 4GB sandisk sd card in the phone. My music is all mp3 and in the path \music\[album name]\*.mp3.
Click to expand...
Click to collapse
Cool. I have a Kingston 8gb class 4 but I have it partitioned to have my apps run on it. I wonder if that has anything to do with it. I'm gonna try it on a different sd card later see what happens
Thanks for the info

Just a quick update for anyone who happens upon this thread. I just upgraded to the 1.5 ION Cupcake version of Android and am happy to report that in conjunction with disabling USB debugging on the G1, my Pioneer FHP800BT / FHP8000BT is now able successfully mount my G1 as a USB device
On a semi-related note, Bluetooth stereo (basic back/next, no browsing or id3 support) and phonebook downloading also work now as well.
Now if only I could convince Google to bring back support for automatic USB mounting and bluetooth/gps toggling via Locale or some such, I'd be a *really* happy camper

Cannot get watch to connect to pc

I have installed all drivers i could fine. Whenever i plug the watch into my pc it doesn't even make the chime sound, nor does the device show up in device manager.
Can someone please help me, i just got my watch two days ago and would like to enable more cores because mines quite laggy on android wear 2.0.

If you have enabeld USB Debugging ?
This you can do in the Developers Options.
If you dont see Developers Options under SETTINGs then you must first enable the Developer Options...
To do this ...
Go to SETTINGS there in Devices Info and then TAP 7 times at Buildnumber... after this go back to Settings and you see the Developers Options and there you can enable USB Debugging
Sorry for my bad english...

i have already done that also. ive tried about everything i can fine. the dock charges the watch just fine, i have also tried different usb cords. is there any way to adb over wifi?

TTGZDOG said:
i have already done that also. ive tried about everything i can fine. the dock charges the watch just fine, i have also tried different usb cords. is there any way to adb over wifi?
Click to expand...
Click to collapse
Hey did you found any solution?
I am on the same boat, the watch can charge and works (laggy) fine, but I am unable to let it be recognize in any way.
I tried same USB cord with several phones and it's ok, but the watch cannot be in any way recognized...

Someone please help us out lmao, the watch is so damn laggy and battery is awful.

I managed to do adb over wifi on the watch, but obivously this do not help with unlocking bootloader or anything in fastboot mode..

codymamak said:
I managed to do adb over wifi on the watch, but obivously this do not help with unlocking bootloader or anything in fastboot mode..
Click to expand...
Click to collapse
Did you all download and try the latest adb? I was having this same issue and turned out that once I updated the adb from the Android sdk, everything worked perfectly.

Uhm, I'll try thank you!
I downloaded all the driver I could get, even from official android.com site, but still the issue is same:
When I plug USB cable in the PC, I get no chime sound or request of anything: tried putting the watch on cradle in standard running mode, in fastboot mode, or in recovery or even powered off.
Same result: no reaction from PC at all.
Tried connecting various phones with same cable as the watch cradle usb cable, everytime the driver kick-in and phone is detected and system either use Google USB driver or ask for drivers.
I read somewhere on the internet that if phone is not connected with Wear app the smartwatch is not connected? But how to do that if the watch is in fastboot mode for unlocking?

Btw I also found that the system update was to version NXG47C and now the fastboot menù is indicating that bootloader is version LENOK22b (secure boot is enabled in green and lock state is locked).
I am lost, even the SDK Android drivers did not change a thing, but more than anything else I do not get why PC do nothing (not even chime sound) when plugging in, my cradle is original and all things come from its box from 2014..I never tried before connection so I do not know if that was working before, but I am starting to think I need a new cradle maybe...

codymamak said:
Btw I also found that the system update was to version NXG47C and now the fastboot menù is indicating that bootloader is version LENOK22b (secure boot is enabled in green and lock state is locked).
I am lost, even the SDK Android drivers did not change a thing, but more than anything else I do not get why PC do nothing (not even chime sound) when plugging in, my cradle is original and all things come from its box from 2014..I never tried before connection so I do not know if that was working before, but I am starting to think I need a new cradle maybe...
Click to expand...
Click to collapse
I have 2 cradles (that -same thing as you- work with anything else instantly) and since the NXG47C/LENOK22b combo simply do not work, so it seems it isn't a cradle problem. :crying:
Did you find anything else, codymamak?

m3ta said:
I have 2 cradles (that -same thing as you- work with anything else instantly) and since the NXG47C/LENOK22b combo simply do not work, so it seems it isn't a cradle problem. :crying:
Did you find anything else, codymamak?
Click to expand...
Click to collapse
Sadly, no.
I was just looking to cradle options but what you are reporting here now makes me believing that really, it's something else...but probably only LG knows why they did that...Only reason I can think of, is to make us users purchase newer models locking out features that make it still good with AW 2.0
It's really a pity.
My only other idea is to try with a different OS, as atm I got only Win 10 64bit Creator Update , but I could use a old HDD and try with a Win 7 32bit...but it's a LOOOOOOOOONG shot as from my experience at least the chime sound should be there...:crying:

Oh! Different OS - I forgot to mention it before, sorry: I tried on Windows 10 and MacOS.
Again, both work fine with other Android USB-debugging-active devices.
Sorry for adding more bad news to an already bad story.. :/

I would have guessed this, sadly.
Well, this means something needs to be found to reactivate the fastboot connection from the devs...meanwhile, I found that the old dev options to lower the scale of the animations improves a bit the slugginess of the watch...
Let's hope someone notices this thread and find a way to help us out, as I'm 100% no-dev...

codymamak said:
Sadly, no.
I was just looking to cradle options but what you are reporting here now makes me believing that really, it's something else...but probably only LG knows why they did that...Only reason I can think of, is to make us users purchase newer models locking out features that make it still good with AW 2.0
It's really a pity.
My only other idea is to try with a different OS, as atm I got only Win 10 64bit Creator Update , but I could use a old HDD and try with a Win 7 32bit...but it's a LOOOOOOOOONG shot as from my experience at least the chime sound should be there...:crying:
Click to expand...
Click to collapse
Exactly same thing about me. USB plugged in and nothing happen, I tried win 10 OS and win7 - same problem - I also thought it is cradle problem, I almost bought a new one but after you wrote I dont't think I could help look we are stucked with AW2.0 and only thing is hope someone will find solution for this...

I am still stuck on this situation, no way to make watch try the USB connection.
Could it be possible that the latest update disabled the USB ADB?
Can someone confirm if the USB ADB files are still in the package?
And if not, is it possible to add them back using for example ADB over wifi, through maybe the original recovery if not possible with system running?

codymamak said:
I am still stuck on this situation, no way to make watch try the USB connection.
Could it be possible that the latest update disabled the USB ADB?
Can someone confirm if the USB ADB files are still in the package?
And if not, is it possible to add them back using for example ADB over wifi, through maybe the original recovery if not possible with system running?
Click to expand...
Click to collapse
It is really anointing when some other users write about downgrade without problems. I'm thinking how is it possible, so everyone got the same version of AW2.0, it is really weird

I have 2.0 on gwr and my win 8 recognised them. I just installed adb usb drivers in same way as I did for Huatch: as Motorola android sooner composite adb interface.

Where do I find these famous motorola android sooner drivers for w7 x64?

Adambeat22 said:
Where do I find these famous motorola android sooner drivers for w7 x64?
Click to expand...
Click to collapse
Probably installed with drivers for motorola phone. The thing is I did not install this exact adb driver on purpose. I found it as I was trying out anything to make the watch connect to PC. It was a pure luck.

same thing happen to me!
I thought it was the cradle, I have 3 cradles, though all is not original, all fail. so I though the cradle only can charge. But I vaguely remember I once using it to flash, but my memory is not so reliable, so it can be the original or the 'not original'.
I can connect ADB using the bluetooth debug mode and go to fastboot, but even in fastboot mode, my pc still cannot detect the watch.

First thoughts and current issues

Mine arrived yesterday, so I have not had much time to "play". But here are my first impressions and the issues I have found.
First impressions (coming from an LG G3).
It is super fast. I really like that.
The phone signal strenght seems better. So, either they "lie" on the display or the antenna is better.
No bloat - nice.
I got the 128Gb one. Loads of free memory and storage. I like that.
Screen is OK.
It came with dual sim slots which I didn't know - I can now use both sims in one phone.
Now, issues:
It won't connect to my PC. I get a "USB device not recognised" error. Spent ages chatting with their techie and I need to put it into USB debug mode and the load an ADB driver which they could not provide. How STUPID is that.
The capacitive button lights are so dim as to be unusable and only come on as you press on the spot. What is the point of that?
Bluetooth won't connect to my headset (MPows) unless I put it into APTX mode.
Bluetooth connects to my car for phone, but while it tries to play audio, there is nothing there. I have loaded some music and it plays OK using VLC. Maybe the music is in the wrong place but I have no idea how to check.
If anyone has any idea on my first issue, I would be grateful for some help.
Alan

alan sh said:
Now, issues:
It won't connect to my PC. I get a "USB device not recognised" error. Spent ages chatting with their techie and I need to put it into USB debug mode and the load an ADB driver which they could not provide. How STUPID is that.
Click to expand...
Click to collapse
I had this issue, it would appear to fairly common. What worked for me was the following.
1) Disconnect your phone and restart windows. (Restarting windows was necessary for me as attempting to connect the phone and it failing caused something that was only cleared by a reboot).
2) Enable developer options and on the phone and select USB debugging mode.
3) While you are in developer change Select USB Configuration to MTP (Media Transfer Protocol).
4) Check step 3) actually stuck. It takes a few goes for me and others for some reason.
5) Connect it to your PC
6) Hopefully it will mount as a drive called Oneplus Drivers or something similar (can't remember the exact name). In this driver is a setup up for the USB driver installation. Run it as admin and install.
7) If that all worked you should now have the mounted drive described above and your Oneplus 5 as a separate mounted MTP device in explorer which you can access the internal storage from.
For me, I can't disconnect and reconnect without rebooting windows and repeating steps 3,4 & 5 above. There is clearly either a bug in Oxygen or a driver issue that needs resolving but hopefully this will work for now. For info, with the phone connected my PC won't shut down. It does boot to the login screen but won't actually show the login prompts! Weird.

Thnks Chris. At the moment, I can't get MTP mode to "Stick". I'll keep trying. I may have also found some ADB drivers (on my laptop which is not near me at the moment).
Alan

One more issue - playing music over bluetooth, it occasionally "stutters" and I hear what appears to be a very small gap in the music - about 1/10th second - but noticeable. Has anyone seen (heard) this?
Alan

alan sh said:
One more issue - playing music over bluetooth, it occasionally "stutters" and I hear what appears to be a very small gap in the music - about 1/10th second - but noticeable. Has anyone seen (heard) this?
Alan
Click to expand...
Click to collapse
I have had this with a previous phone, not this one. What does the catlog say during the stutter? Mine showed errors regarding the Bluetooth communication, does yours do that? This can help you find out if it's software or hardware.
My capacitive buttons seem dimm as well, haven't really noticed that before..

AT,
What is the catlog? Where do I find that?

alan sh said:
Thnks Chris. At the moment, I can't get MTP mode to "Stick". I'll keep trying. I may have also found some ADB drivers (on my laptop which is not near me at the moment).
Alan
Click to expand...
Click to collapse
Alan,
If you try and set MTP mode a few times it will stick. However, the text under Select USB Configuration will still say "Charging" unless you leave the Developer options menu and go back in again. Then it should say "MTP (Media Transfer Protocol)".

Chris,
You are a star. That worked and I can now see my internal storage.
Thank you
I just have to find out why my 2016 BMW will not see the music over bluetooth now (my old LG G3 worked fine)
Alan
Alan

Haven't tried to mount to PC yet. Surprising it isn't like the oneplus 3 where it mounts a separate drive on the PC with the drivers?

alan sh said:
Chris,
You are a star. That worked and I can now see my internal storage.
Thank you
I just have to find out why my 2016 BMW will not see the music over bluetooth now (my old LG G3 worked fine)
Alan
Alan
Click to expand...
Click to collapse
The only thing I can think to do is delete the phone from the car's memory entirely. Delete the connection from the phone entirely, and start all over. You may have done that, but on my 2013 Veloster I have had times where I needed to just start over completely. Having said that, no problems out of the box for me so far with the OP5 in my car, bluetooth gym headphones, or either bluetooth speaker I use. It's been very easy.

I tried that - still the same. The attached picture shows what I get.
This is my last major issue with this phone.....
Alan

Onother issue i just found out...
Maybe someone else found a fix, but i didnt....
With my OP2 i always conncted e Little USB adaptor with a micro sdcard in it to the phone to Transfer Music or any other files to or from the phone. When i connected it to the phone it imidiatly was recognized and in the filemanager one more Folder was created to manage These files.
But on my OP5 nothing happens....... can someone help?
Edit: last Oxygen Update, OTG is on, USB Debugging is on

Stefan McSleaze said:
Onother issue i just found out...
Maybe someone else found a fix, but i didnt....
With my OP2 i always conncted e Little USB adaptor with a micro sdcard in it to the phone to Transfer Music or any other files to or from the phone. When i connected it to the phone it imidiatly was recognized and in the filemanager one more Folder was created to manage These files.
But on my OP5 nothing happens....... can someone help?
Edit: last Oxygen Update, OTG is on, USB Debugging is on
Click to expand...
Click to collapse
Yeah, I think TechTablets on Youtube also mentioned USB-on-the-go not working on his OnePlus 5.

pedodroid said:
Yeah, I think TechTablets on Youtube also mentioned USB-on-the-go not working on his OnePlus 5.
Click to expand...
Click to collapse
Would be sad without that feature because always connecting to my PC wouldnt be such comfortable for filetransfer....
Hope that the developer from Oneplus will fix it in future

Had an issue with the APN for T-Mobile in the US. I had data and could make VOLTE calls etc but email through TypeApp or Blue mail would not sync and various other programs had issues (connection errors), over wireless at the house everything was fine. I added the APN suggested by T-mobile haven't had an issue since. All I changed was the APN protocol to IPv6/IPv4 (was just IPv6) and removed hipri and supl from the APN type.
Everything works as it should.

hey I want to ask a question
is the camera on the op5 worse than the note 5 ?

In the advanced settings I noticed a Bluetooth codec option which might help.
I haven't tested it on the car yet. mines a 17 VW so will test it

I've tried changing the codec - no difference.

another annoiing issue....it changes network from O2/4G LTE to EPlus 3G. So i disabled automatic network and switched manual to O2 again. But the same....it really s...ks, because most time it runs with Edge only
tapatalked...

Only issue I have at the moment is too sensitive autorotation of the screen. Even though the rotation happens very fast, I would prefer it not turning in the first place if phone is rotated only few degrees. I wish there was a way to adjust the angle when to rotate the screen.
Sent from my ONEPLUS A5000 using Tapatalk

Question Windows USB recognition

My new device is not being recognised by the cable which came with the device, but if I use a Samsung cable it works. Weird part is that that the Samsung device gets recognised by the Mi cable.
Any suggestion on how to solve this?
EDIT: The connection is not stable.

Reboot... always reboot.
Try a different port.
One or both cables may be bad.
Check Windows Event Viewer for error messages.
Use Disc Management>scan for new devices to detect/open new drives.
Check drivers in Hardware management, install new or try a roll back.

Yeah, those things I had done.
EDIT: Samsung device has no issues, stable connection.

No error messages?
You the time index there to sync when you attempted connection.
If not showing in Disc management, it's the cable, the device, the port or the driver.
Did the phone show a popup for the connection attempt? Check phone settings/permissions.
Try safe mode on the phone.
Probably something you overlooked, try to trace it out. Reboot everything... reboot, reboot etc.
Cables can appear to work but in fact be defective... lol, 2 bad cables don't make a good one. Generally the stock Samsung cables are long lived. Avoid using long cables.
Google this issue for this model and other models by the same manufacturer.
Play with it, eventually you'll find the issue... first attempted hookup, anything goes. Nice when it's seamless but not always

The phone does not show any prompt with the MI cable, no detection by Windows. Only with the spare Samsung cable.

kruga said:
The phone does not show any prompt with the MI cable, no detection by Windows. Only with the spare Samsung cable.
Click to expand...
Click to collapse
Then the phone isn't hand shaking. Could be a phone hardware issue, firmware or a simple settings misconfiguration. Inspect C port for damage or debris.
Try on another PC with a known good cable. Process of elimination, isolate the problem.

I don't have another pc to check. right now.. and it's a new phone.

kruga said:
I don't have another pc to check. right now.. and it's a new phone.
Click to expand...
Click to collapse
I hear you. You need to verify the phone is good or return it. Might be worth letting a local repair shop look it over and see if it connects for them.
A little hands on can go a long way.
Maybe someone here has seen this issue on this model and has a better plan...

I just tried with a USB hub and the phone gets recognised.... I haven't seen anything like this before.

Sounds like a driver issue.

Well... I have tried different drivers... Maybe I am missing the correct one.

You tried letting Windows find the best driver?
If that device manufacturer has a PC app for transferring files, backup, loading that or extracting its driver would probably fix it.

Yes, but I don't think it's a driver issue. Windows can identify the device correctly, just not directly. Mi PC Suite does not recognise the device.
EDIT: Ah, that's a very old and not updated suite.

does it get detected as a samsung device when you reboot into fastboot? if yes, ignore, i have the same problem, but it will continue to work just fine. If it's outside of fastboot then i have no idea.

I haven't tried fastboot yet. Only the normal windows USB connnection.

kruga said:
Yes, but I don't think it's a driver issue. Windows can identify the device correctly, just not directly. Mi PC Suite does not recognise the device.
EDIT: Ah, that's a very old and not updated suite.
Click to expand...
Click to collapse
If you connect using Windows Disk Management you can access the drive directly from there.
That's all I use on the PC for this. I open two windows there to do transfers.

blackhawk said:
If you connect using Windows Disk Management you can access the drive directly from there.
That's all I use on the PC for this. I open two windows there to do transfers.
Click to expand...
Click to collapse
Thanks, I have been able to connect it to PC using USB hub and even things like the debloater app is working. Still don't know what the issue is though.

kruga said:
Thanks, I have been able to connect it to PC using USB hub and even things like the debloater app is working. Still don't know what the issue is though.
Click to expand...
Click to collapse
Sounds like a driver issue; the hub has the right driver but the PC does not.
Something is not configured correctly on the PC.
Check Event Viewer again, Security.
Fun isn't it?
Do some Google searches ie Redmi Note 10S, not handshaking with PC
Might find something you overlooked.
I solve all my problems either playing with or doing Google searches. Just add XDA on the end of a search to find topics on XDA.
Those pervasive web crawlers can be helpful...

blackhawk said:
Sounds like a driver issue; the hub has the right driver but the PC does not.
Something is not configured correctly on the PC.
Check Event Viewer again, Security.
Fun isn't it?
Do some Google searches ie Redmi Note 10S, not handshaking with PC
Might find something you overlooked.
I solve all my problems either playing with or doing Google searches. Just add XDA on the end of a search to find topics on XDA.
Those pervasive web crawlers can be helpful...
Click to expand...
Click to collapse
Yeah, there is definitely some configuration issue. As the phone gets recognised indirectly, I will assume that it is ok.
The place from where I bought initially said that this phone does not support PC...

kruga said:
Yeah, there is definitely some configuration issue. As the phone gets recognised indirectly, I will assume that it is ok.
The place from where I bought initially said that this phone does not support PC...
Click to expand...
Click to collapse
I'm sure it does... lol, maybe it likes Macs better
There's some quality customer support