Database Develop

<rant>HD2 t-mobile brand screen protector.

Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.

i know how you feel! i bought them when i got my hd2 and i got the top two-thirds of the protector on perfect but then the bottom third somehow got dust underneath, it really not that bad when the screen is on but its still annoying. cant wait to get my invisibleshield on it tho!
order this, the maximum protection from zagg....
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php

I used invisishield on my ipod. Great stuff, but hard to get on perfect. 3 parts for a curved back and front only covers the LCD part? The front part sounds so unlike them. They normally have it going round buttons and everything.
But it's like putting tint on. You need to have a liquid to make slide just right.

i used invisible shield on my iphone, and it was fully protected. It did add grip to the device which i liked. Anyways, the maximum protection shield covered more than the normal full-body shield. It'll cover not only the LCD screen but all spaces around the hardware buttons and well as the speaker.

starstreak said:
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
Click to expand...
Click to collapse
I also got these same screen protectors and was dissapointed when it did not cover the entire screen.
Trick to putting on screen protectors.
1.) Make sure the screen is completely clean of all smudges etc.
2.) Use a can of air duster to remove any small dust particles that might be stuck on the phone. If you don't have that then just take a piece of tape and remove any dust particles or dirt from the screen. This is the most important part!
3.) Line up the screen protector on the screen where you want to place it.
4.) Peel back the backing of the screen protector as you lay the screen on the device. Start from the top of the device and work your way down. If need be take out a credit card or another hard piece of plastic of some sort to push out any air bubbles that may occur as you lay down the screen protector.'
5.) Enjoy a job well done.

It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?

pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
My TMOUS HDC HD2 is definitely glass.
I didn't bother to use a screen protector (didn't even know there was one supplied)...it isn't necessary on a glass screen.
Its very hard to scratch glass...you would need a very sharp object, made out of a very hard material (harder than glass), applied with a lot of pressure. I've had my iPhone for 3 years, and the glass is flawless on it. The aluminum housing is scratched, dented, and dinged up, and the LCD panel has a little bit of bruising on the top left corner BEHIND the glass...but the glass itself is immaculate.
Apple actually pulled the screen protectors off the shelves from the Apple store because they felt they were unnecessary..and frankly anyone who pays for one on the HD2 or iPhone wasted their money.
You'll actually see more imperfections on the screen by applying a screen protector...they have a tendency to attract dust, bubble up, and flat out get dirty. The only maintenance you need to do on a glass screen is polish out smudges and finger prints.
The biggest peril to glass touch screens is cracks from falls....and if your HD2 suffers a big enough impact, a screen protector or 'invisible shield' won't do squat to keep it from cracking

glass or plastic..either way.. i was soooooooooooo confident i wouldnt scratch mine, until about a minute ago when i was in the process of wiping the glass(plastic) screen before putting on a screen protector, i noticed a little scratch...great. Should've put on a protector sooner...
From now on, I willl be putting on a screen protector unless the screen are made out of crystal sapphire or something..

pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
We actually do not get an included screen protector. Only the black gel case, which imo is quite crappy... loose and flimsy

http://forum.xda-developers.com/showthread.php?p=6117793#post6117793 Check out oy instillation of the Invisible shield if you are considering buying one. I bought the Maximum Protection and it covers almost everything besides for around the buttons on the bottom, volume rocker, camera, Micro USB/ 3.5 Headphone jack, and the finger nail grove on battery cover. I also would like to note that my TMOUS HD2 did not include any screen protectors in the box.

Sorry imo I have to disagree with you about the included gel being loose mine fits quite snugly and until my zagg comes in I prefer to keep it in the gel...not as slick & keeps the screen(when face down) off the flat surface.

A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!

MAMeingast said:
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
Click to expand...
Click to collapse
I agree, I used to do this back in the day before Zagg came around. It works great.

I have read with other products people use a drop or water/soap water before applying a screen protector. Has anyone used this method on this device? i am concerned that the water will somehow ruin the device. I know it's only a drop or 2 but wanted to get some feedback first before i tried it.

[REVIEW] Skinomi Tech Glass™ Samsung Galaxy S6 Edge Full Coverage Screen Protector

I know most of us (if not all) keep looking for that perfect tempered glass screen protector for our phones (not to mention that it has to be curved of course).
Today I received my Skinomi Samsung Galaxy S6 Edge tempered glass screen protector, and I'd be more than happy in sharing my review of the product.
Packaging:
Packaging is retail. I pre-ordered from their website directly (rather not deal with Amazon), and I got a cool coupon that saved me 25% .
What comes included is your screen protector, fiber cloth, alcohol cleaning cloth and dust lifter screen.
Installation:
I'm going to be completely honest here; This is my first time installing a tempered glass screen protector. Much less a dry installation. I've always used invisible shield for my previous devices so I was expecting a hassle. This was by far the easiest installation I've ever done. Super easy!
Fit:
The fit is not as great as I'd expect it to be. It doesn't cover the phone fully on the edges, you can still see some small space that's left uncovered (I've attached pictures for your leisure). I'm sure that I've installed it as best as humanely possible (actually quite proud of that haha).
The capacitive buttons on the bottom or probably my main issue; The cover completely warps them. The cutouts on the glass protector don't match the cutouts on the phone itself. This causes the buttons to look weird and warped when they light up. I personally don't care (now if this is a mistake and someone from Skinomi is reading this, then please reach out!), the case does what it's supposed to do, but I feel that it makes the fact you have a glass protector on your phone obvious.
Feel:
The protector feels great, you really can't tell there's something on top of your screen. Touch sensibility is weird around the middle towards the left edge on my particular protector (I do have to press slightly harder in order to get a response), but I'm having that after 24 hours that problem clears out.
Final thoughts:
I actually like the protector overall. It's not bad for the price I payed (although I was expecting a better fit for the buttons and a better fit around the screen itself). I'm guessing that as long as the screen protector doesn't come off like the Spigen one I would consider myself happy.
I know the pictures are not the greatest, but If you guys want better ones or different angles or something just let me know!
Hope this helps!

Are those glittery specks permanent?

Graffiti Exploit said:
Are those glittery specks permanent?
Click to expand...
Click to collapse
Yes they are.

I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk

Mikeonic said:
I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk
Click to expand...
Click to collapse
Exactly my thoughts. If the edges were more sensitive, I wouldn't care about the rest.

I'm very impressed with this tempered glass. SGP use to be my favorite for all my devices but I'll start considering Skinomi tempered glass going forward.
There are some sensitivity issues on the left side but hopefully that will go away once the glass settles in and will report back if it does or doesn't go away later in the week. What I mean is that I would have to press harder than normal.
Here is a pic with the glass before installation. I just realized I still had the clear plastic covering my lens after I took this picture and will add a few more pictures with it being installed once I borrow a colleagues camera phone.
It looks so beautiful once installed and no bubbles like the SGP curved one. TBH, hyped went away once I started to get sensitivity issues on the left hand side and hopefully it will go away after a few days.
EDIT: after re-aligning the glass, I don't have any sensitivity issues anymore. You might have to re-aligning it a few times if you're off. Don't worry, you won't lose any stickyness. This tempered glass is worth buying IMHO.

Is it really necessary to have a screen protector?

I've had my Note 8 for 9 days now and while I was thinking about buying a screen protector when it arrived, I must admit that I'm quite impressed by the quality of the screen. It just feels so hard to scratch, so much so that one would probably struggle trying to scratch it even on purpose. I don't really see myself scratching it by accident anytime soon, although I must admit I'm this kind of guy who never drops the phone and handles it with extreme care.
I'm just curious to read what you guys think, maybe somebody persuades me to buy a screen protector after all, who knows.

The Gorilla Glass 5 is more shatter-resistant than previous versions and that means it is softer also. I had my Note 7 only a few days before it started picking up micro scratches on the front and back. Your mileage may vary. I'm putting on a Whitestone done and a skin on the back of mine.

I bought a screen protector but am debating putting it on. I may try it and see how it goes

Many of us do fine with no protection. Others report getting scratches no matter how hard they try not to.

I've always put a protector on my previous phones but I'm using my Note 8 without a screen protector. Like you, I'm always very careful with my phone and never drop it. The pocket that I put my phone in only contains my phone; I never put loose change or key in there. My Spigen Slim Armor case protects most of the phone and keeps the screen off the table surface if I do put it face down. With all of the issues people have had with curved tempered glass screen protectors, it just seems like more hassle than it's worth. The only one I'd get is the Whitestone Dome but that costs $60 here. Bit pricey.

I always run a protectors. Better safe then sorry.
I take very good care of my stuff. If a scratch did happen you cant take it back. So there would be no way ti fit it without buying a no front glass or new phone.
With a protector you can simply remove it and put on another one.

Fwiw, 5 days and i have a scratch, no clue where it came from. Have never used screen protectors, but will now
Sent from my SM-N950U using XDA-Developers Legacy app

It's def worth it. On my S8 there was a scratch after few days and I am very careful about my phone so really don't know how it happened.

Same here...it is so minor and you cannot even feel it. Babied it too. Also a small one on the back and it had a case day 1. Something tells me it came like that

Going naked for now. Just watch out for sand, fine sand , seems to be the only thing. If it was a flat screen I would have tempered glass on it.
Sent from my Galaxy Note8 using XDA Labs

ANY sharp instrument will scratch if the point is pressed in to the display, period. It is MUCH easier to bang on it with a long blade edge and look like you did nothing than the tip of an x-acto knife. That is what those demos do. Resisting attack across a large area is really what you are seeing. Keys are small like that etc...
Finally, a big part of Gorilla Glass is that it also HIDES or better put doesnt show minor damage as much as other glass. In other words, its there you just don't see it.
I bet a screen for this will be $300-$400. How much is a protector that looks good?

Better safe than sorry. Once it's scratched it would bug the hell out of me. It's a £1000 device.

Throw a screen protector on it. In time, micro-scratches will appear on your screen if you dont!

Note FE, had it on the ironing board (and forgot about it). Folded the ironing board and it very gently slid down it onto the floor face down....very gently....resulted in a 7mm scratch.
Not got one on this yet but it does highlight how pathetically weak GG5 is.

I put one on from iq shield...works great with my ringke wave

Since its a huge pain to find a glass protector that fits and doesn't screw up touch sensitivity I just grabbed the $8 Skinomi wet install protector, works great including with the edge display and S-Pen.

I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.

princeasi said:
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
Click to expand...
Click to collapse
But if it still looks like a scratch....

I personally really don't get the mentality of people who put huges cases and screen protectors on their phones. Most people here are obsessive on having 'the latest' and upgrade yearly when new stuff comes out so they can have the nicest, thinnest, prettiest shiny piece of hardware - Then they go wrap it all up in a thick rubber/plastic case and make it look sh*t. Why buy a device with no bezel if you're gonna put a huge thick case bezel around it!
I've had all my smartphones without cases/screen protectors as that's how they're meant to be and to honest I look after my devices. I usually get 2 year contracts on phones and at the end of 2 years, worst case, a few micro scratches on the screen - That's it. Do these guys bubble wrap their cars? It's a phone, it's designed to be used, it'll get the odd small scratch, just enjoy it for what it is IMO.

I have dropped my Pixel XL and the screen protector cracked but the screen was fine. Same on my Nexus 6. Dropped it on it's face from about 5' and the screen protector cracked all over it but the screen remained crack free. I fell that a glass screen protector takes the abuse of a drop. Granted, I've never dropped a phone with a screen protector so not sure if they would have cracked the screen without a protector but to me, It used to be relatively cheap protection. Some of the better protectors are 40+ now so it's not as easy a decision as it used to be for me.

Best screen protector? . And don't recommend whitestone dome (i will explain why)

So got my shiny new Note 8 week ago. Also with that got the Whitestone Dome screen protector and alcantara case.
Tried to install screen protector:
1st. attempt: The screen lined up incorrectly from the bottom, tried to "lift it up to the position" just created more airbubles and the glue poured out from the sides.
After cleaning my Note 8 with the alcohol swipes, (It was a mess to try to clean the phone AND the glass screen protector)
2. attempt with the second bottle of glue..... There was a dust particle on the glue itself. Great.
Wait for a week to mobilefun to ship me another one. (while doing so i was "dry- practicing" to get it 100% correct this time)
3. attempt was a charm.... until.... when the glue spread there was 2 small air bubbles... Take the second bottle and "tap" the small air bubbles away. (while doing so being extremely nervous about that the screen protector might move or great new bubbles). Managed to get the bigger one out but there was the small one... Didn't get that out.
Light up the UV light and call it a day. Only problem is now there is small air bubble that is pretttty distracting to say the least.
So, now i am with 50€ in my account from the order. (Because i demanded that they refund me this horrible product). I am left to choose new screen protector.
My options that i have read:
- Rearth invisible defender - The problem with this is that there is "snowfall" effect and the screen is too damn sticky (according to reviews)
- IQ Shield - The problem with this is that the S-pen (according to reviews) leaves trails to the TPU protector. Because it's so soft and it will not cure overtime.
-Zagg invisible shield - Unresponsivnes and the fact that it has "raimbow" -effect on the screen.
New one that i just founded out about:
-Powerpeak Base- According to this guy (Install Jimmy is Promo's "Base Screen protector for Samsung GALAXY S8 & Note 8 here) Its pretty good. Might be ad though... Does any of you have experience on this?
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.

I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.

Bullitt3309 said:
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Click to expand...
Click to collapse
I am sort of guy, who can easily mess things like that up... So not going to risk it.

Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk

DAvid_B said:
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I did check that thanks! Only problem is that i live in EU (Finland) And Amazon will not ship that item to me.... Looked up in Ebay and they will add 20€+ to the original price...
Bummer tho,.

Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.

Base TGSP is a piece of shot
That Jimmy guy sounds like an infomercial

Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer

xile6 said:
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
Click to expand...
Click to collapse
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?

I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...

Limeybastard said:
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Click to expand...
Click to collapse
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.

KBeckett said:
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
Click to expand...
Click to collapse
Im primarily using and trying non glass type films, similar to the stuff used to protect car paint protection. My background includes being able to apply paint protection film on cars so these are all from the same mold that I have been trying. BTW, heat of a hairdryer will aid in adhering the curved edges once applied- slight tip.
I have not tried IQShield yet, sorry. So far the Spigen one fitted well coverage wise,but their film is very aggressive in the orange peel front,
I might try Skinomi next, but I have heard they cut their films short to save a few bucks.
Lets liase and share our experiences with these type of films, cheers.

Thanks for all of you for the help and responses.
Yes the IQshield and Skinomi are on the top of my list... They are around 20€ including shipping to Finland from Ebay. A bit expensive but lets see....

Im currently using IQshield version 2 (case friendly) for about a week now.
I've done a lot of wet install before so i know what to expect using this type of screen protector. Its been a week now and so far no lifting on the curve part of the screen. it is smooth to touch, sensitivity is normal and very good. Im using a VRSdesign slim case and it works well, all corners fitted very well.
I also used skinomi before and if i remember it right IQshield is more smoother than skinomi in-terms of orange peel feeling. The only problem that is s-pen will leave marks when used with this kind of screen protector. (i tried it at the very bottom and its still have mark after a week)
I can give this IQshield a 7.5/10 score. LOL

YesThisIs said:
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
Click to expand...
Click to collapse
I used the tip of placing painter's tape over the speaker. I covered the speaker enough to not interfere with the glass. It worked great! I do have three small bubbles after two tries but can't see them unless I try. My wife's has one bubble in about the same spot as mine. The lower left corner about 1/3 up the screen where the curve starts. There a number of ways to avoid the creation of bubbles. I couldn't say them all because I'm not an expert in LOCA glue and it's properties. Experimentation is the only way to find out.

Whitestone Dome Glass said:
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Click to expand...
Click to collapse
I am glad that you have started beeing more on forums and social media. I want to thank you for sending me a new one. Now i am waiting for it. Hope this time works.

To be honest, it will be difficult to actually get most tempered glass protectors to stay on this curved glass.. Its a pain and it sucks because I would actually like to get one. I just ordered the whitestore myself..., but they wont be in stock again until the 30th...
I got the PowerPeak Base and it is utter garbage. I lost atleast 30% touch sensitivity and then it just eventually slid off of my phone from me trying to swipe so hard. The middle actually dried up and there was nothing holding the middle to the phone.
I despise the wet installs. They are too soft and will leave indents as you said.. So really its either try tempered glass protectors until you find the one you want, go with indents and wet installs, or just go no screen protector like me!
I have the wet install spigen ones but I tbh would rather go with no protector than use them.

I ordered and installed this on my Note 8 : https://smile.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
Along with a Spigen Tough Armor case. It seems to work well and no real screen sensitivity issues either.

twistanesh said:
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
Click to expand...
Click to collapse
I get the case friendly 2pack. And havent had problems with lifting.
Had my note 8 since sept 8 and been caseless and no lifting.

Anyone planning on using a cheap protector with LOCA glue needs to check the strength of the LOCA. Some have reported they were not able to remove the protector after using some LOCA glue.
I had 3 attempts at the Dome Glass myself. The first one I got had a broken bridge. I could not get the glue in the right spot. Whitestone refunded me. I bought the next set from Amazon. Everything was perfect until I peeled the plastic off the back of the protector. There must have been a fleck of dirt near the side. I did not see it as I did not have enough light.
I sent the second one back to Amazon and just had to pay return shipping. With the third one I took a different approach. I used a totally level counter top in the bathroom. I ran the shower with hot water for about 10 minutes so the whole bathroom was steamed up. This kept the dust down. I cleaned the phone screen and when I removed the plastic from the protector, it somehow grabbed another piece of dirt. Due to the extreme lighting, I saw it and removed it before installing. It installed perfectly with no dust/dirt or air bubbles. I did the first cure with the UV light then took it out of the jig and wiped the sides, top and bottom with an alcohol pad. I then did the final cure. Not one ounce of glue seeped out. I did not protect the speaker or anything else. If this is done perfectly, this is the absolute best protector available IMHO. The problem is anything short of a perfect install will drive many of us with OCD crazy.
On Monday we traded in my Mothers iPhone and she went with a Note 8. The Dome Glass arrived today. This time, perfect install the first time. I wish Whitestone would include 2 pieces of glass per package since this is the most expensive Note 8 protector. Their CS is a bit slow but they did take care of me in the end. It's a bit of a ripoff to sell the kit for 49 but then only sell the glass and one tube of glue for 39. The refill pack should be 15-20 at the highest.
After a week, none of my edges are lifting at all. Some may be using cases that are not compatible. My protector does not touch my case at anyplace. I think cases that touch the protector have a good chance of raising the edges. Even if the case looks fine after install, if grabbing it makes the case touch the glass, it will eventually lift and get bubbles.

amFilm Dot Matrix 3D Curved Samsung Galaxy Note 8 Tempered Glass Screen Protector

So I picked up the amFilm glass screen protector the other day from Amazon. Out of all the glass protectors I could find on Amazon, this had the least amount of bad reviews. Also its sold by TechMatte which I had heard of before.
Anyways, it went on pretty easily. No loss of sensitivity as far as I can tell with using my Finger or the Spen after 24 hrs of use. 2 specs of dirt did manage to get under the glass, but I've almost gotten to the point I can ignore them, and I'm pretty sure if I try to remove it to get rid of them it will make it worse.
The dot matrix on the screen can be seen in some lighting conditions, but you need to look pretty close and not really a distraction.
It seems to fit fine with my Spigen Tough Armor case. My only beef so far is the edges are starting to collect lint/dust etcs. In about a month the surrounding edges of this protector may look really bad. But only time will tell.
https://www.amazon.com/Protector-Coverage-Installation-amFilm-Tempered/dp/B074G1W2RC

I bought the same protector and installed it and only left it on the table untouched for a few days and it lifted off the screen so TechMatte sent me a new one but haven't installed it yet. I'm trying to use it with a Ringke Fusion case.

So its been a little over a week since I put on the screen protector. My only big issue so far is when I hit the down arrow, it makes a noise like its lifting up the protector. Though looks at the protector it still seems glued down so not exactly sure what is going on. Maybe how its rubbing against the protector. TechMatte is sending me another free of charge to put on to see if that helps. As for the crud around the edges, I've just got used to it now. It isn't to bad.

I have used the am film screen protector on my S8 plus and Note 8. It works better than any other I have found. There are some cases that don't work well with it - it all depends on where the case fits on the phone in relation to the glass - if it touches the glass, it is going to lift up the corner or sides at some point. Ringke Fusion and a few others that I have tried work every well. Many of the screen protectors like am film added additional glue to the edges of the screen protector and the good ones included a guide that you use when installing the glass - if the screen protector is perfectly centered on the phone's screen, it works exceptionally well.

The glass clicking was what made me noticed the TGSP lifted as I can lightly touch and the entire glass would come off. I also have the Ringke Fusion. It was TechMatte who told me about the glue only being on the edges when I wrote them about it. I never even noticed there were less than full adhesive TGSP as I have used AmFilm on both the LG G4 and the iPhone 6S Plus without issues.

Almighty1 said:
The glass clicking was what made me noticed the TGSP lifted as I can lightly touch and the entire glass would come off. I also have the Ringke Fusion. It was TechMatte who told me about the glue only being on the edges when I wrote them about it. I never even noticed there were less than full adhesive TGSP as I have used AmFilm on both the LG G4 and the iPhone 6S Plus without issues.
Click to expand...
Click to collapse
Well, I thought I was going to love this screen protector. Unfortunately I ended up returning it. The edges keep lifting up, getting a ton of dust underneath the protector and I'm starting to loose sensitivity.

howie411 said:
Well, I thought I was going to love this screen protector. Unfortunately I ended up returning it. The edges keep lifting up, getting a ton of dust underneath the protector and I'm starting to loose sensitivity.
Click to expand...
Click to collapse
I actually used the original one that lifted with a Ringke Fusion case yesterday and while it worked fine without the case, it seems like the case is sticking in between the screen and the AmFilm which is what is causing the lift. I guess they could use better adhesive.