Database Develop

XPOSED on an Intel Z8300 chip?

Hi, I'm using a Chuwi HiBook, I rooted and unlocked and I flashed xposed-v84-sdk22-x86.zip but now it's not booting, i had to reflash android.
The kernel version says "3.14.37-x86_64-L1-R517
What should i do? I mean, does that zip work for my device? Maybe the 32bit version doesnt work on this yet and I'm making a dumb move
Thanks
EDIT: More info here: http://forum.xda-developers.com/xposed/modules/chuwi-tweaks-t3316556/page2
The system is ARM but there is no tablet with this chip with xposed working on it.
Any clues?

Hi, i think flashing xposed disabler can help you. Just try it.

Yakandu said:
Hi, I'm using a Chuwi HiBook, I rooted and unlocked and I flashed xposed-v84-sdk22-x86.zip but now it's not booting, i had to reflash android.
The kernel version says "3.14.37-x86_64-L1-R517
What should i do? I mean, does that zip work for my device? Maybe the 32bit version doesnt work on this yet and I'm making a dumb move
Thanks
Click to expand...
Click to collapse
try the xposed disabler zip, if it don't work just re-flash the stock rom

Yep i had to flash again, the system is ARM but there is no support for Intel Cherry Trail Z8300 from xposed, there is no device with this cpu with xposed working on it

Yakandu said:
Yep i had to flash again, the system is ARM but there is no support for Intel Cherry Trail Z8300 from xposed, there is no device with this cpu with xposed working on it
Click to expand...
Click to collapse
Agreed, Right now I am searching for MiPad2 xposed.zip without luck.... My cpu is also Intel cherry trail x5-z8500 14nm , The CPU is x86_64 armV8a architecture.
My devices runs as Dual-OS, switching between full windows 10 and full android lollipop within their respective home-screen widgets. That's nice...
I have root and a kind of official aosp, although the official firmware is MIUI.
If someone someday will come across xposed.zip x86_64 then post here a link, please!
Thank you!

datorprofessor said:
Agreed, Right now I am searching for MiPad2 xposed.zip without luck.... My cpu is also Intel cherry trail x5-z8500 14nm , The CPU is x86_64 armV8a architecture.
My devices runs as Dual-OS, switching between full windows 10 and full android lollipop within their respective home-screen widgets. That's nice...
I have root and a kind of official aosp, although the official firmware is MIUI.
If someone someday will come across xposed.zip x86_64 then post here a link, please!
Thank you!
Click to expand...
Click to collapse
is this what you're looking for?
http://en.miui.com/thread-78894-1-1.html

daWyrd1 said:
is this what you're looking for?
http://en.miui.com/thread-78894-1-1.html
Click to expand...
Click to collapse
I got bootloop (and not a single uninstaller working with that too, tried those zip special for MIUI Mipad2 . The other xposed zips are for arm64 and other kinds of arm but not this model one .
I've spoke with the "deliver" too of the flash zips, "Papka__" and SolarWarez and he got them from another place, but none of theme work with MiPAd2. Overall the device is very fast and doing well. Having windows 10 besides as a multiOS.
Also, I've read somewhere that Rovo89 will never get involved in those CPU x86_64, mainly because the vendors have heavily modded ROMs. :crying: I gave up , never ever give up , and now I'm forced to use other kinds of firewalls.... The Xprivacy module was very nice, because I could see in very detail what was going on on each app and a lot of other modding modules.
:good: Thanks anyway for your trying.
Intel the creator of those SoC has dropped the manufacturing in phones and tablets... So there aren't enough big public and demand, which doesn't encourage developers spend time on the hack!
Intel is investing on IoT (internet of everything) and CPU's for drones, The Future Conquer army weapons. Also Intel investing in more power consuming Goldmont CPUs with 6-12watts that are very powerful for bigger mobile devices.

Solved. Except no feedback for MIUI. Cheers
https://forum.xda-developers.com/xposed/xposed-intel-atom-x5-z8300-x8664-solved-t3585087

[ANNOUNCEMENT] Introducing Remix OS Player - Android Marshmallow emulator for PC

We’ve just released Remix OS Player, an Android Marshmallow emulator that lets you run Android games and apps directly on your Windows PC.
Download it here: www.jide.com/remixos-player, play with it and give us feedback here: http://bit.ly/2cxZhBs.
Check out the video intro here: https://www.youtube.com/watch?v=zLcCYmWTl-g
Remix OS Player is now the easiest way for you to experience Remix OS, especially if you still haven’t been able to get it working on your PC.
And, just like Remix OS for PC, it’s free.
Give us feedback and let’s build it together.

hopeful
i think it will be better than bluestacks and andy... tns jide team

Good to know you're getting into the android emu competition!
I've been testing several android emulators on my device, and I sue mostly MEMU as it is the fastest and most stable.
Still, having RemixOS as an emu on Windows 10 would be great. I made a few tests and here are my impression:
- not enough setting on the advanced tab before booting up. I'd like to assign more RAM and CPU cores, and most importantly, a higher resolution as my device has a 2160x1440 resolution.
- Performance is quite low, maybe it will be better if I can assign more resources.
- no full screen mode - this is essential for running it as a real emulator
- I can't find a way to share files and APKs from my windows partition as in other emulators
Looking forward for more updates

Can't boot. Stuck at loading screen. Not sure why. Or do I need to wait longer?
Surface Pro 3.
Edit: Never mind. I reinstalled and it works now.

This is what I get:
emulator: ERROR: x86_64 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: Unable to open HAXM device: ERROR_FILE_NOT_FOUND
Please help!

This is great. I've had Remix OS as a dual boot option on my Windows 8.1 laptop. But wanted something that I can quickly switch between Android and Windows, rather than reboot each time. Recently found LeapDroid and it perfectly fits my bill so far. I'm glad Remix is jumping on the VM direction as well. I'll check the OS player.
---------- Post added at 11:01 AM ---------- Previous post was at 10:42 AM ----------
Getting this error. Looks like VT-x needs to be turned on? I'll keep checking.
------------------------------------------------------------------------------------
emulator: ERROR: x86_64 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: VT feature disabled in BIOS/UEFI
---------------------------------------------------------------------------------------

Sadly the emulator isn't working for me. Starts loading up and then just closes without an error

Cursor issues
I installed the new Remix.exe and it appears to load fine but the cursor force moves to the left leaving me unable to click anything. Anyone else having issues? I am on a Lenovo 460s touchscreen model. I tried uninstalling and reinstalling but still having the same issue. Any help would be appreciated.

You need to install Intel HAXM
MartinDimchev said:
This is what I get:
emulator: ERROR: x86_64 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: Unable to open HAXM device: ERROR_FILE_NOT_FOUND
Please help!
Click to expand...
Click to collapse
You need to install Intel HAXM. I had the same issue and resolved it by installing Intel HAXM. It basically reserves a particular amount of RAM from your PC for running Android x86 sources. I have linked it in my guide here, have a look: http://techbeasts.com/download-remix-os-player-for-pc/

for the ones who does have virtualisation error ,you need to go to tools and instal intel haxm app.
it is a intel android emulator runtime provided with remix player.
now my feedback....
this need a full screen mode for the app.
it need to save settings for resolution/cores/ram.
it need ota updates.
It need stable and working play store.
It need smoother zoom and scroll.
The key mapper need to be in app instead of in rom.
it need open gl es 3.0 support.
need 4cores 4gb ram support.
and this absolutely need game controller support!
it need large hdd image support.(8 16 32 64 gb)
outside this everything is ok.

twacker said:
Sadly the emulator isn't working for me. Starts loading up and then just closes without an error
Click to expand...
Click to collapse
Install Intel HAXM and try it again It will work.

Can someone direct how to get google-apps and root on this one? Thanks.

This is only for Intel CPU?

tailslol said:
for the ones who does have virtualisation error ,you need to go to tools and instal intel haxm app.
it is a intel android emulator runtime provided with remix player.
now my feedback....
this need a full screen mode for the app.
it need to save settings for resolution.
it need ota updates.
it need open gl es 3.0 support.
and this absolutely need game controller support!
it need large hdd image support.
outside this everything is ok.
Click to expand...
Click to collapse
Did you face black screen on boot after launching it? If so, then how did you fix it?

um009 said:
Did you face black screen on boot after launching it? If so, then how did you fix it?
Click to expand...
Click to collapse
no black screen on me,i use a gtx 980 with a i7 4770k
i have enabled vt-d and virtualisation in my uefi bios and instaled intel haxm and set it for 4gb ram
and i use 3gb 720p 3cores in remix player.

um009 said:
You need to install Intel HAXM. I had the same issue and resolved it by installing Intel HAXM. It basically reserves a particular amount of RAM from your PC for running Android x86 sources. I have linked it in my guide here, have a look: http://techbeasts.com/download-remix-os-player-for-pc/
Click to expand...
Click to collapse
Can't be installed. Gives me error. Can't find driver or something. Saw in the comments on the download page many people have the same problem after Anniversary update... So messed up.
The guy that's saying to install it from the tools folder. What I need to install, there are many things.

tailslol said:
no black screen on me,i use a gtx 980 with a i7 4770k
i have enabled vt-d and virtualisation in my uefi bios and instaled intel haxm and set it for 4gb ram
and i use 3gb 720p 3cores in remix player.
Click to expand...
Click to collapse
I have the virtualisation enabled and also installed HAXM but its stuck on the black screen for me. Can't get across this

um009 said:
I have the virtualisation enabled and also installed HAXM but its stuck on the black screen for me. Can't get across this
Click to expand...
Click to collapse
your hardware is?

tailslol said:
your hardware is?
Click to expand...
Click to collapse
AMD Radeon HD 7600M Series
Core i7 - 3612QM
8 GB RAM.

um009 said:
AMD Radeon HD 7600M Series
Core i7 - 3612QM
8 GB RAM.
Click to expand...
Click to collapse
hoo a amd laptop gpu with laptop intel cpu...
with that you should not go beyond 2 cores.
or it can be hardware driver related.

[DEPRECATED] [Module][2018.10.4] Miracast, Tethering HDMI Enabler + USB Debugging Notification Dis

THIS PROJECT IS NO LONGER SUPPORTED.
Code:
# <Module name goes here>
## Copyright (C) 2017-2018, VR25 @ xda-developers
### License: GPL v3+
---
#### DISCLAIMER
This software is provided as is, in the hope that it will be useful, but without any warranty. Always read/reread this reference prior to installing/upgrading. While no cats have been harmed, I assume no responsibility under anything which might go wrong due to the use/misuse of it.
A copy of the GNU General Public License, version 3 or newer ships with every build. Please, read it prior to using, modifying and/or sharing any part of this work.
To prevent fraud, DO NOT mirror any link associated with this project.
---
#### DESCRIPTION
Hide USB Debugging notification, enable tethering, HDMI (& HDMI mirroring), and wireless display mirroring (Miracast). More features may come.
---
#### PRE-REQUISITES
- Magisk v15+
---
#### SETUP STEPS
1. Install/upgrade from Magisk Manager or custom recovery.
2. Reboot.
3. Go to Settings > Display > Cast > 3 dots; tick the "Enable wireless display" checkbox.
---
#### LINKS
- [Facebook Page](https://facebook.com/VR25-at-xda-developers-258150974794782/)
- [Git Repository](https://github.com/Magisk-Modules-Repo/<repo name goes here>/)
- [XDA Thread](https://forum.xda-developers.com/apps/magisk/module-miracast-tethering-enabler-adb-t3611335/)
---
#### LATEST CHANGES
**2018.10.4 (201810040)**
- Magisk 15+ support
- Set prop values aggressively.

You should note it's for marshmallow mainly. Doesn't work on Nougat for many devices. Untested on android O.

LazerL0rd said:
You should note it's for marshmallow mainly. Doesn't work on Nougat for many devices. Untested on android O.
Click to expand...
Click to collapse
I've tested only on Moto Z Play stock Nougat and LineageOS based ROMs. You may be right. Perhaps some manufacturers hardcode their ROMs to bypass this kind of modification. I don't have any other device to test this on. I'll post a poll to see how that goes. Thanks.

VR25 said:
I've tested only on Moto Z Play stock Nougat and LineageOS based ROMs. You may be right. Perhaps some manufacturers hardcode their ROMs to bypass this kind of modification. I don't have any other device to test this on. I'll post a poll to see how that goes. Thanks.
Click to expand...
Click to collapse
Well, ik on Nexus it doesn't work in any stock based Nougat ROM.

Will it work in Kitkat or Lollipop?

Raynelfss said:
Will it work in Kitkat or Lollipop?
Click to expand...
Click to collapse
Yes, but it may not work on some devices/ROMs. You should try and report back.

LazerL0rd said:
Well, ik on Nexus it doesn't work in any stock based Nougat ROM.
Click to expand...
Click to collapse
Yes. Miracast on LineageOS only work for now. (It's just fixed this problem, no magisk module, no editing build prop)

VR25 said:
After installing and rebooting, go to Settings > Display > Cast > Click the 3 dots > Enable Wireless Display > Done.
Now you can mirror your phone's screen to any Miracast supported device, such as TVs and Windows 10 PCs.
Note: this may not work on some devices/ROMs.
Click to expand...
Click to collapse
Is there a uninstaller incase it doesn't work on my phone? Running resurrection remix 7.1.2

n0013z said:
Is there a uninstaller incase it doesn't work on my phone? Running resurrection remix 7.1.2
Click to expand...
Click to collapse
Usually, this doesn't cause any issue in case it doesn't work. You can easily remove it from the Magisk Manager app. Alternatively, you can also mount magisk.img from recovery and delete the folder "magiskmiracast" inside /magisk.
Use this recovery flashable zip
https://forum.xda-developers.com/attachment.php?attachmentid=4081169&d=1489956274
to mount magisk.img to /magisk.

Miracast is working for me but only for some minutes I play videos, show some pictures and the screen freeze only in my Smartv.
I play videos and more with Allcast and it doesn't happen
Sent from my Moto G (5) Plus using XDA Labs

No luck for me
Oneplus 2 a 2003 rr 5.8.3

Not working on OP3T on OOS

Tried it and it kills magisk and xposed without mercy. Samsung galaxy on5 stock touchwiz 6.0.1

Shen Ron said:
Tried it and it kills magisk and xposed without mercy. Samsung galaxy on5 stock touchwiz 6.0.1
Click to expand...
Click to collapse
Something is wrong with TouchWiz.

So, do I need to be rooted? Or can it be flashed from stock recovery on my zte blade v7 lite (android 6.0) without damage being done? Also I do believe the device needs specific hardware, correct me if I'm wrong!?...

Has anyone tested this on OnePlus 3T?

gb_14 said:
Has anyone tested this on OnePlus 3T?
Click to expand...
Click to collapse
Heyyo, lol literally four posts above yours.

ThE_MarD said:
Heyyo, lol literally four posts above yours.
Click to expand...
Click to collapse
Oh yeah, sorry, I haven't noticed.

HTC One m9, bad boys one m9 nougat 4.1 rom.
I dont have a display option in the settings (probably because of sense)
Only have display and gestures but no cast option inside.

I installed on my S7 Edge Nougat ... But I did not find in any menu the options to activate. Has anyone had this problem? I also tried to test mirroring with an LG TV and could not.

Any way of getting Qualcomm DIAG drivers on my custom rom ?

Greets,
I have a custom rom installed on my phone and majisk rooted. I want to install this app snoopsnitch (Android app that collects and analyzes mobile radio data to make you aware of your mobile network security and to warn you about threats like fake base stations (IMSI catchers), user tracking and over-the-air updates.)
However the app gives an error :
Your device is not compatible
REASON: Could not initialize DIAG interface
Visit the project website for details (https://opensource.srlabs.de/projects/snoopsnitch)
Click to expand...
Click to collapse
On the website itself it sais amongsts others :
Unsupported. Devices with custom ROM such as CyanogenMod which lacks the Qualcomm DIAG kernel driver (DIAG_CHAR)
Click to expand...
Click to collapse
My phone is Lenovo ZUK Z2 pro with latest AOSP Extended.
Is this given only to manufacturers or is there a chance i can get this compiled for my phone as well ?

Probably not. It would be nice though.

Probably not going to see it in a custom kernel or probably not going to find it as in source code ?
any clues as to where i could get more info on this issue ?

hash02 said:
Probably not going to see it in a custom kernel or probably not going to find it as in source code ?
any clues as to where i could get more info on this issue ?
Click to expand...
Click to collapse
I probably know less about this than you. But I doubt you can import it into a custom ROM.

Trying to build Halium for tab 2

So I'm trying to get halium working for tab 2 (we can get ubuntu touch and maybe even plasma mobile with help of it) and I get this error
Code:
arch/arm/boot/compressed/atags_to_fdt.o: In function `merge_fdt_bootargs':
atags_to_fdt.c:(.text+0x20c): undefined reference to `__stack_chk_fail'
atags_to_fdt.c:(.text+0x210): undefined reference to `__stack_chk_guard'
It seems to be a toolchain error any help?

"It would appear that the -mstack-protector-guard option is only for backwards compatibility with how the stack protector worked in the past. In the past the canary was in a global variable. Later it was switched to TLS. It would appear that the operating system / libc you use either removed or never had support for the global variable canary, so only TLS works.
Don't touch the -mstack-protector-guard option and everything should work. The default should be fine when you use -fstack-protector-all."
"Provide __stack_chk_guard with a random value in c file, avoid using regular values like all zero's or FF's because the stack can easily get these values during any memory operation. Wiki on providing magic number implementation. This __stack_chk_guard will be placed at the top and bottom of the stack, which will be checked during every stack access. Any change in the value implies a corrupted stack and returns with error providing the stack protection.
unsigned long __stack_chk_guard;
void __stack_chk_guard_setup(void)
{
__stack_chk_guard = 0xBAAAAAAD;//provide some magic numbers
}
void __stack_chk_fail(void)
{
/* Error message */
}// will be called when guard variable is corrupted "
"There are two ways to remove this error: 1. From the compiler option disable(comment out) the "stack guard".
Define __stack_chk_guard in you c file.
When you define __stack_chk_guard make sure you provide random value to it. For providing random value you need to pass as an argument to the random function.
For any further detail you can refer to the compiler manual."
"For those that get this error in bare metal software development with a custom linker script, make sure to pass the option -nostdlib option:
gcc -nostdlib
since Ubuntu 16.04 for example enables the stack protection by default on the compiler. man gcc says:
NOTE: In Ubuntu 14.10 and later versions, -fstack-protector-strong is enabled by default for C, C++, ObjC, ObjC++, if none of -fno-stack-protector, -nostdlib, nor -ffreestanding are found.
-fno-stack-protector also solved it for me, but you should likely tell your poor compiler that you are doing baremetal stuff to prevent other such problems.
I'm guessing this is because the feature relies on symbols which are normally defined if a linker script is not given? But TODO I found no mention of those symbols by dumping the default linker script with:
aarch64-linux-gnu-gcc -Wl,-verbose main.c
so I'm not sure.
I grepped GCC 6.4.0 source code and it suggests that the symbol comes from libgcc2.c at gcc/doc/tm.texi:
The default version of this hook creates a variable called @samp{__stack_chk_guard}, which is normally defined in @file{libgcc2.c}."
Click to expand...
Click to collapse
source: https://stackoverflow.com/questions/27290086/gcc-canaries-undefined-reference-to-stack-chk-guard

i cant wait to use this and your other project (sailfishos)!

wizzer48 said:
i cant wait to use this and your other project (sailfishos)!
Click to expand...
Click to collapse
Yes even I can't wait for both as there is no latest development for our tab !!!

Arc android said:
Yes even I can't wait for both as there is no latest development for our tab !!!
Click to expand...
Click to collapse
Halium doesnt seem to work i tried but to no avail

Mithil17 said:
Halium doesnt seem to work i tried but to no avail
Click to expand...
Click to collapse
Its OK at least you tried to build it !!

Hey I have a great idea Mithil17, can you try to build MIUI 7 for galaxy tab 2? There was an attempt to build it earlier but it wasn't successful.

Arc android said:
Hey I have a great idea Mithil17, can you try to build MIUI 7 for galaxy tab 2? There was an attempt to build it earlier but it wasn't successful.
Click to expand...
Click to collapse
MIUI ??? Why do you wanna china bloadware sooo badly?? what's wrong with LOS or any other bloadware free ROMs?
Plus it's gonna be laggy as h3ll... done and forgotten.

drnightshadow said:
MIUI ??? Why do you wanna china bloadware sooo badly?? what's wrong with LOS or any other bloadware free ROMs?
Plus it's gonna be laggy as h3ll... done and forgotten.
Click to expand...
Click to collapse
Yeah I know it's Chinese but it looks beautiful. You'll know it if you have tried mini 5 for tab 2.

Arc android said:
Yeah I know it's Chinese but it looks beautiful. You'll know it if you have tried mini 5 for tab 2.haha
Click to expand...
Click to collapse
Haha, no thank you! I'm happy with LOS and RR ROMS. I own redmi note 5 pro but never used MIUI [email protected], I unlocked bootloader and installed LOS asap. I like to have privacy in my hand and I hate when OS wanna rape my privacy. My privacy isn't on sale.

drnightshadow said:
Haha, no thank you! I'm happy with LOS and RR ROMS. I own redmi note 5 pro but never used MIUI [email protected], I unlocked bootloader and installed LOS asap. I like to have privacy in my hand and I hate when OS wanna rape my privacy. My privacy isn't on sale.
Click to expand...
Click to collapse
If you actually want this much privacy, here's something for you : https://androidfilehost.com/?fid=17248734326145705104
An unofficial /e/os build for your device. Just trying to help you in case you didn't know this. That's all !

Arc android said:
If you actually want this much privacy, here's something for you : https://androidfilehost.com/?fid=17248734326145705104
An unofficial /e/os build for your device. Just trying to help you in case you didn't know this. That's all !
Click to expand...
Click to collapse
whyred = Redmi Note 5. Not SGT2
Are you sure? It can brick device​

levider said:
whyred = Redmi Note 5. Not SGT2​Are you sure? It can brick device​
Click to expand...
Click to collapse
Note 5/pro = whyred that's what Google says.
Also in the above link, it is made for redmi note 5 pro

Official /e/ forum link : https://www.google.com/url?sa=t&sou...FjACegQIBBAC&usg=AOvVaw1iyAyl2Ur__Xid-tw1cRCz

I hope I am not doing anything wrong

Arc android said:
Note 5/pro = whyred that's what Google says.
Also in the above link, it is made for redmi note 5 pro
Click to expand...
Click to collapse
Dude, this is not Redmi Note 5 thread.

Update: It boots now, Sources are in https://github.com/Halium/projectmanagement/issues/238 no ui still

Mithil17 said:
Update: It boots now, Sources are in https://github.com/Halium/projectmanagement/issues/238 no ui still
Click to expand...
Click to collapse
So we can install it now ???? !!!!!

Arc android said:
So we can install it now ???? !!!!!
Click to expand...
Click to collapse
Well you can just install it, it just boots, no ui/display

Mithil17 said:
Well you can just install it, it just boots, no ui/display
Click to expand...
Click to collapse
So it means even if I install it, it can't be operated. Why some things are way too difficult for tab 2 ?? I mean miui7, sfos, treble, Oreo and now haloum are ported to other devices too that are mostly similar to ours but running them on tab 2 is a bit more difficult.