Recovering Bricked BLU R1 HD - BLU R1 HD Questions & Answers

Hi guys, my first androind in a few years
A cousing of mine just handed me his bricked R1 HD "as a gift". My goal is to unbrick it, if possible, and hand it to my little nice to replace her broken phone..
Cousing says, it got bricked while doing an OTA update, he tried reseting it and.. nothing..
Here is scoop, when i turn on the phone it boots, and i get the error message: "Unfortunately, GBA SErvices has stopped" over and over again.
Can i load a custom rom and even a stock rom to it and make it work again?
Thanks!

Found a stock backup rom with SP flash tool, cant seem to get it to load.
Let see if i can upload images..
Enviado desde mi iPhone utilizando Tapatalk

https://drive.google.com/file/d/1cj9A3y_BKtD0hQLtqtaOli6eNhT1IdCj/view?usp=sharing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have access to the phone via windows explorer yet get a communication error..
Any ideas?
Enviado desde mi iPhone utilizando Tapatalk

luistf76 said:
I have access to the phone via windows explorer yet get a communication error..
Any ideas?
Enviado desde mi iPhone utilizando Tapatalk
Click to expand...
Click to collapse
Can it load I to recovery?
Did you try factory reset if it loads recovery?
That should fix it . If his story about it stopped working solely because if an OTA update.
Google search tells me that error is possibly related to messaging somehow.
https://www.google.com/amp/s/amp.re.../unfortunately_gba_services_has_stopped_help/

Recovery: power and volume up?
I tried that, (i think he did that too) it does the same.. boots up, to that welcome screen, as soon i scroll up to unlock i get that error msg “gba service has stopped”, i press on and the error msg re-appears... only way to get away from that loop is to reboot or turn off.
Enviado desde mi iPhone utilizando Tapatalk

Being reading some since last night,
Went to Recovery mode,
Did a wipe data/factory reset AND wipe cache partition
Still have same error pop-op once i scroll up to unlock it:
1. Unfortunatelly, GBA Services has stopped. (OK)
-- once i hit (OK) i get another error message that only last a fraction of a sec, had to use slow-motion video to eve see what it says.
2. Unfortunatelly, the process androind.process.acorenas stopped.
then back to error one, and the loop starts.
edit: just noticed, a "fota provider has stopped" message pop-up for a minute then went back to error #1.
this phone is wacked!
--------
Installed the fastboot and got phone info:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:flashinfo: 1000000
(bootloader) partition-type:flashinfo: raw data
(bootloader) partition-size:userdata: 32000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 19000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: a7000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:metadata: 2500000
(bootloader) partition-type:metadata: raw data
(bootloader) partition-size:nvdata: 2000000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw data
(bootloader) partition-size:tee2: 500000
(bootloader) partition-type:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:keystore: 800000
(bootloader) partition-type:keystore: raw data
(bootloader) partition-size:secro: 600000
(bootloader) partition-type:secro: raw data
(bootloader) partition-sizeemkeystore: 200000
(bootloader) partition-typeemkeystore: raw data
(bootloader) partition-size:seccfg: 80000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-size:expdb: a00000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:recovery: 1000000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-sizeara: 80000
(bootloader) partition-typeara: raw data
(bootloader) partition-size:lk: 80000
(bootloader) partition-type:lk: raw data
(bootloader) partition-sizerotect2: a00000
(bootloader) partition-typerotect2: ext4
(bootloader) partition-sizerotect1: a00000
(bootloader) partition-typerotect1: ext4
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-sizeroinfo: 300000
(bootloader) partition-typeroinfo: raw data
(bootloader) partition-sizereloader: 40000
(bootloader) partition-typereloader: raw data
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) kernel: lk
(bootloader) product: P6601
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
------------------------
The error message i keep getting with SP Flash: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
i have two set of bins, one stock amazon from rootJunky and an OEM from here. (I´ll use the OEM, but just had to try)
As for drivers, im using CDC MediaTek SP Drivers v2.0 signed.
i think i got the tools i need but the SP flash is not communicating with the phone.
what im i missing?

luistf76 said:
Being reading some since last night,
Went to Recovery mode,
Did a wipe data/factory reset AND wipe cache partition
Still have same error pop-op once i scroll up to unlock it:
1. Unfortunatelly, GBA Services has stopped. (OK)
-- once i hit (OK) i get another error message that only last a fraction of a sec, had to use slow-motion video to eve see what it says.
2. Unfortunatelly, the process androind.process.acorenas stopped.
then back to error one, and the loop starts.
edit: just noticed, a "fota provider has stopped" message pop-up for a minute then went back to error #1.
this phone is wacked!
--------
Installed the fastboot and got phone info:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:flashinfo: 1000000
(bootloader) partition-type:flashinfo: raw data
(bootloader) partition-size:userdata: 32000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 19000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: a7000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:metadata: 2500000
(bootloader) partition-type:metadata: raw data
(bootloader) partition-size:nvdata: 2000000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw data
(bootloader) partition-size:tee2: 500000
(bootloader) partition-type:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:keystore: 800000
(bootloader) partition-type:keystore: raw data
(bootloader) partition-size:secro: 600000
(bootloader) partition-type:secro: raw data
(bootloader) partition-sizeemkeystore: 200000
(bootloader) partition-typeemkeystore: raw data
(bootloader) partition-size:seccfg: 80000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-size:expdb: a00000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:recovery: 1000000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-sizeara: 80000
(bootloader) partition-typeara: raw data
(bootloader) partition-size:lk: 80000
(bootloader) partition-type:lk: raw data
(bootloader) partition-sizerotect2: a00000
(bootloader) partition-typerotect2: ext4
(bootloader) partition-sizerotect1: a00000
(bootloader) partition-typerotect1: ext4
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-sizeroinfo: 300000
(bootloader) partition-typeroinfo: raw data
(bootloader) partition-sizereloader: 40000
(bootloader) partition-typereloader: raw data
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) kernel: lk
(bootloader) product: P6601
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
------------------------
The error message i keep getting with SP Flash: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
i have two set of bins, one stock amazon from rootJunky and an OEM from here. (I´ll use the OEM, but just had to try)
As for drivers, im using CDC MediaTek SP Drivers v2.0 signed.
i think i got the tools i need but the SP flash is not communicating with the phone.
what im i missing?
Click to expand...
Click to collapse
Ever since the second OTA update (6.6) . Spft has been blocked by the new preloader that the update installed.
And after the 8.x update to the kernel has been patched to block dirty-cow exploit, so those were the two methods we had to root. And unfortunately I think root is needed to fix your problem.
Sounds like you might be in a no win situation.
There is some talk in the general thread about a risky method to force phone to take an spft connection. Maybe you could be an exterminator and see if you get success.
A chance it will make things worse though.

Dirty-cow exploit?? Haven’t tried that.. will look into it
How do u force a phone to take spft connection? Water board it? ?
Enviado desde mi iPhone utilizando Tapatalk

luistf76 said:
Dirty-cow exploit?? Haven’t tried that.. will look into it
How do u force a phone to take spft connection? Water board it? ?
Enviado desde mi iPhone utilizando Tapatalk
Click to expand...
Click to collapse
lol
sort-of
it involves soldering jumper wire between test points on mother board.
Not done for every board, thats why it is experimental.

Yeah.. at this point it seems like a paperweight..
can u point me to that thread about soldering?
Enviado desde mi iPhone utilizando Tapatalk

luistf76 said:
Yeah.. at this point it seems like a paperweight..
can u point me to that thread about soldering?
Enviado desde mi iPhone utilizando Tapatalk
Click to expand...
Click to collapse
here is the thread here on R1HD thread where the method is mentioned. Method is on Hovatech.com
https://forum.xda-developers.com/showpost.php?p=74811964&postcount=1891

@luistf76
Have you removed the SIM card and tried factory reset.
A deeper search showed me the error message is more related to the the SIM card "pairing secret" with the service provider.

The phone haven’t had a sim in months.
When time allows, ill try the ‘harsh’ method. Its allready bricked so no biggie.
Enviado desde mi iPhone utilizando Tapatalk

Help please!!!
Hello!!! How could I find or make the "update.zip" file from the "bim blu r1 R0010UU.rar", "MTK6735_1902151154.bin" or "SP_Flash_Tool_BLU_R0010UU_V6.4_Firmware.zip" that I've already downloaded for my BLU R1 HD??? I've tried with SP Flash Tool and Miracle Thunder, but there's something missing with the USB Port, cable or PC, so I would like to do it trough Recovery Mode with "apply update from sd card"... Thanks a lot for your help!!!

Related

help my plzz

I need stock recovery from my htc D626ph / 0PM1100
C:\Root>fastboot getvar all
(bootloader) partition-size:userdata: 32000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: c800000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: 5e000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:expdb: ce0000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:cota: 3200000
(bootloader) partition-type:cota: ext4
(bootloader) partition-size:resv: 80000
(bootloader) partition-type:resv: raw data
(bootloader) partition-size:ebr2: 80000
(bootloader) partition-type:ebr2: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:misc: 80000
(bootloader) partition-type:misc: raw data
(bootloader) partition-size:sec_ro: 600000
(bootloader) partition-type:sec_ro: ext4
(bootloader) partition-size:recovery: a00000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot: a00000
(bootloader) partition-type:boot: raw data
(bootloader) partition-size:uboot: 60000
(bootloader) partition-type:uboot: raw data
(bootloader) partition-size:seccfg: 40000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-sizerotect_s: a00000
(bootloader) partition-typerotect_s: ext4
(bootloader) partition-sizerotect_f: a00000
(bootloader) partition-typerotect_f: ext4
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-sizero_info: 300000
(bootloader) partition-typero_info: raw data
(bootloader) partition-size:ebr1: 80000
(bootloader) partition-type:ebr1: raw data
(bootloader) partition-size:mbr: 80000
(bootloader) partition-type:mbr: raw data
(bootloader) partition-sizereloader: 40000
(bootloader) partition-typereloader: raw data
(bootloader) kernel: lk
(bootloader) product: HTC_ASIA_WWE
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.047s
thanks for all ...

cannot remove partitions through fastboot. why?

Hello, i've got softbricked K3 Note i tried to remove partitions through fastboot or parted but no luck.
Here are fastbot errors:
Code:
C:\adb>fastboot getvar all
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:userdata: 32000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 1a800000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: a0000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:frp: 860000
(bootloader) partition-type:frp: raw data
(bootloader) partition-size:metadata: 2000000
(bootloader) partition-type:metadata: raw data
(bootloader) partition-size:tee2: 500000
(bootloader) partition-type:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:expdb: a00000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:para: 80000
(bootloader) partition-type:para: raw data
(bootloader) partition-size:secro: 600000
(bootloader) partition-type:secro: ext4
(bootloader) partition-size:recovery: 1000000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-size:lk: 60000
(bootloader) partition-type:lk: raw data
(bootloader) partition-size:seccfg: 40000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-size:protect2: a00000
(bootloader) partition-type:protect2: ext4
(bootloader) partition-size:protect1: a00000
(bootloader) partition-type:protect1: ext4
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-size:proinfo: 300000
(bootloader) partition-type:proinfo: raw data
(bootloader) partition-size:preloader: 40000
(bootloader) partition-type:preloader: raw data
(bootloader) off-mode-charge: 1
(bootloader) warranty: no
(bootloader) unlocked: yes
(bootloader) secure: no
(bootloader) kernel: lk
(bootloader) product: AIO_OTFP
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.010s
C:\adb>fastboot erase system
******** Did you mean to fastboot format this partition?
erasing 'system'...
FAILED (remote: unknown command)
finished. total time: 0.000s

Not able to find "OEM unlocking" in the developer options

Hi guys,
I am trying to root my BLU R1 HD and I read many articles all of which says I need to turn on "OEM unlocking" in the developers options.
However, I can not find such option on my phone.
So I skipped this step and then failed to unlock the bootloader.
So can anyone help to point out what should I do?
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>adb reboot bootloader
adb server is out of date. killing...
* daemon started successfully *
error: no devices found
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot getvar all
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:flashinfo: 1000000
(bootloader) partition-type:flashinfo: raw data
(bootloader) partition-size:userdata: 32000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 19000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: a7000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:metadata: 2500000
(bootloader) partition-type:metadata: raw data
(bootloader) partition-size:nvdata: 2000000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw data
(bootloader) partition-size:tee2: 500000
(bootloader) partition-type:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:keystore: 800000
(bootloader) partition-type:keystore: raw data
(bootloader) partition-size:secro: 600000
(bootloader) partition-type:secro: raw data
(bootloader) partition-sizeemkeystore: 200000
(bootloader) partition-typeemkeystore: raw data
(bootloader) partition-size:seccfg: 80000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-size:expdb: a00000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:recovery: 1000000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-sizeara: 80000
(bootloader) partition-typeara: raw data
(bootloader) partition-size:lk: 80000
(bootloader) partition-type:lk: raw data
(bootloader) partition-sizerotect2: a00000
(bootloader) partition-typerotect2: ext4
(bootloader) partition-sizerotect1: a00000
(bootloader) partition-typerotect1: ext4
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-sizeroinfo: 300000
(bootloader) partition-typeroinfo: raw data
(bootloader) partition-sizereloader: 40000
(bootloader) partition-typereloader: raw data
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) kernel: lk
(bootloader) product: P6601
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.125s
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot devices
OBDQY9J7KVBIYPTW fastboot
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot oem unlock
...
(bootloader) Start unlock flow
FAILED (remote:
Unlock operation is not allowed
)
finished. total time: 10.695s
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot oem unlock
...
(bootloader) Start unlock flow
FAILED (remote:
Unlock operation is not allowed
)
finished. total time: 59.152s
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>
Thanks,
Yun
Yun Wu said:
Hi guys,
I am trying to root my BLU R1 HD and I read many articles all of which says I need to turn on "OEM unlocking" in the developers options.
However, I can not find such option on my phone.
So I skipped this step and then failed to unlock the bootloader.
So can anyone help to point out what should I do?
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>adb reboot bootloader
adb server is out of date. killing...
* daemon started successfully *
error: no devices found
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot getvar all
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:flashinfo: 1000000
(bootloader) partition-type:flashinfo: raw data
(bootloader) partition-size:userdata: 32000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 19000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: a7000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:metadata: 2500000
(bootloader) partition-type:metadata: raw data
(bootloader) partition-size:nvdata: 2000000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw data
(bootloader) partition-size:tee2: 500000
(bootloader) partition-type:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:keystore: 800000
(bootloader) partition-type:keystore: raw data
(bootloader) partition-size:secro: 600000
(bootloader) partition-type:secro: raw data
(bootloader) partition-sizeemkeystore: 200000
(bootloader) partition-typeemkeystore: raw data
(bootloader) partition-size:seccfg: 80000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-size:expdb: a00000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:recovery: 1000000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-sizeara: 80000
(bootloader) partition-typeara: raw data
(bootloader) partition-size:lk: 80000
(bootloader) partition-type:lk: raw data
(bootloader) partition-sizerotect2: a00000
(bootloader) partition-typerotect2: ext4
(bootloader) partition-sizerotect1: a00000
(bootloader) partition-typerotect1: ext4
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-sizeroinfo: 300000
(bootloader) partition-typeroinfo: raw data
(bootloader) partition-sizereloader: 40000
(bootloader) partition-typereloader: raw data
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) kernel: lk
(bootloader) product: P6601
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.125s
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot devices
OBDQY9J7KVBIYPTW fastboot
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot oem unlock
...
(bootloader) Start unlock flow
FAILED (remote:
Unlock operation is not allowed
)
finished. total time: 10.695s
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot oem unlock
...
(bootloader) Start unlock flow
FAILED (remote:
Unlock operation is not allowed
)
finished. total time: 59.152s
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>
Thanks,
Yun
Click to expand...
Click to collapse
Well hello Yun,
You have come to the right place.
Those articles you read could not have been on this site though. Look around at some of the threads here on this sub-forum, your questions have been asked and answered many times.
PS
HINT:. There is no oem unlock switch in this phone(option hidden by manufacturer to block root attempt). And if build custom version higher than 8, there is no working root method.
mrmazak said:
Well hello Yun,
You have come to the right place.
Those articles you read could not have been on this site though. Look around at some of the threads here on this sub-forum, your questions have been asked and answered many times.
PS
HINT:. There is no oem unlock switch in this phone(option hidden by manufacturer to block root attempt). And if build custom version higher than 8, there is no working root method.
Click to expand...
Click to collapse
Hi mrmazak,
Thanks so much for the warm greeting.
On this forum what I found is this: R1 HD Amazon Bootloader unlock method https://forum.xda-developers.com/r1-hd/development/r1-hd-amazon-bootloader-unlock-method-t3426104
I tried the method 1 and here is what I got as I already posted:
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>fastboot getvar all
.
.
.
(bootloader) unlocked: no
.
.
.
And I also tried method 2 and got a S_BROM_DOWNLOAD_DA_FAIL (0x7D4) error.
Then on https://forum.xda-developers.com/r1-hd/help/error-sbromdownloaddafail-0x7d4-help-t3485791 someone said
If you are on prime update 6.6 or newer then that message is because the preloader has been replaced by Blu the purposefully block sp flash tool.
Does that "prime update 6.6 or newer" also means "build custom version" as you mentioned?
The build custom version on my phone is BLU_R0010UU_V8.5_GENERIC 13-06-2017 18:25, so according to your statement looks like I won't have a chance to root it ... So sad T_T ...
Anyway, thanks very much again!
Look in Settings->About device->Custom build version and tell us what it is. Someone posted that the phones currently shipping from Amazon are coming with version 8.x which can not be rooted or flashed.
yaconsult said:
Look in Settings->About device->Custom build version and tell us what it is. Someone posted that the phones currently shipping from Amazon are coming with version 8.x which can not be rooted or flashed.
Click to expand...
Click to collapse
Hi yaconsult, it's BLU_R0010UU_V8.5_GENERIC 13-06-2017 18:25. Thanks.
Yun Wu said:
Hi yaconsult, it's BLU_R0010UU_V8.5_GENERIC 13-06-2017 18:25. Thanks.
Click to expand...
Click to collapse
Then you have the updated version that can't be rooted as SP Flash Tool has been disabled. If you didn't update it yourself after you got it then you must have gotten one of the newer versions that Amazon is reported to be shipping now.
It might still be possible to remove the ads, though. Read all the way through this thread: https://forum.xda-developers.com/r1-hd/help/remove-ads-fresh-blu-r1-hd-t3654431 But I'm not sure if this still works with the latest version or not.
yaconsult said:
Then you have the updated version that can't be rooted as SP Flash Tool has been disabled. If you didn't update it yourself after you got it then you must have gotten one of the newer versions that Amazon is reported to be shipping now.
It might still be possible to remove the ads, though. Read all the way through this thread: https://forum.xda-developers.com/r1-hd/help/remove-ads-fresh-blu-r1-hd-t3654431 But I'm not sure if this still works with the latest version or not.
Click to expand...
Click to collapse
Thanks.
Yes, I did the update some time ago
I will try the "pm hide" method and update my status later, thanks very much for your suggestion!
yaconsult said:
Then you have the updated version that can't be rooted as SP Flash Tool has been disabled. If you didn't update it yourself after you got it then you must have gotten one of the newer versions that Amazon is reported to be shipping now.
It might still be possible to remove the ads, though. Read all the way through this thread: https://forum.xda-developers.com/r1-hd/help/remove-ads-fresh-blu-r1-hd-t3654431 But I'm not sure if this still works with the latest version or not.
Click to expand...
Click to collapse
Hi yaconsult,
Unfortunately, looks like I am not able to "pm hide" an app on my BLU R1 HD running BLU_R0010UU_V8.5_GENERIC.
The reason is my phone is not shown on "adb devices".
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>adb devices
List of devices attached
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>adb shell pm list packages
error: no devices found
D:\phone\BLU-R1-HD-Bootlaoder-Unlock>
Before doing this I have already enabled USB debugging.
One thing I noticed is there are only 3 choices for USB:
- Charging only;
- MTP;
- PTP;
I am not sure whether there is an debugging choice when running version older than v8.x.
Thanks,
Yun
Well, you can't do anything until adb can see your phone, so...
Did you check the windows device manager to see if Windows has a driver for the phone installed? Or is there an exclamation mark in device manager meaning that there isn't a driver for it? Windows drivers can be a pain so I used my Linux system to reflash and root my phone.
Did you enable developer options on the phone?
Go to the settings menu, and scroll down to "About phone." Tap it.
Scroll down to the bottom again, where you see "Build number." (Your build number may vary from ours here.)
Tap it seven (7) times.​You can find some posts about getting adb working on your phone in this thread, if you need them, even though you can't root your updated phone using that method: https://forum.xda-developers.com/r1-hd/how-to/twrp-how-to-root-t3425677
Once you can see your phone with 'adb devices', then see mrmazak's post here: https://forum.xda-developers.com/showpost.php?p=73582720&postcount=18
yaconsult said:
Well, you can't do anything until adb can see your phone, so...
Did you check the windows device manager to see if Windows has a driver for the phone installed? Or is there an exclamation mark in device manager meaning that there isn't a driver for it? Windows drivers can be a pain so I used my Linux system to reflash and root my phone.
Did you enable developer options on the phone?
Go to the settings menu, and scroll down to "About phone." Tap it.
Scroll down to the bottom again, where you see "Build number." (Your build number may vary from ours here.)
Tap it seven (7) times.​You can find some posts about getting adb working on your phone in this thread, if you need them, even though you can't root your updated phone using that method: https://forum.xda-developers.com/r1-hd/how-to/twrp-how-to-root-t3425677
Once you can see your phone with 'adb devices', then see mrmazak's post here: https://forum.xda-developers.com/showpost.php?p=73582720&postcount=18
Click to expand...
Click to collapse
Thanks.
I think the driver is successfully installed. I can see my phone in the Computer, and I didn't see any exclamation in the device manger. But, OK I will try Linux.
Yes I have already enable develop options.
I read the thread you mentioned (https://forum.xda-developers.com/r1-hd/how-to/twrp-how-to-root-t3425677), the problem is, as I mentioned many times, I always got a S_BROM_DOWNLOAD_DA_FAIL (0x7D4) error after my phone powered off.
I will try on Linux to see whether my phone can show up on 'adb devices'.
Thanks and let me update later.
yaconsult said:
Well, you can't do anything until adb can see your phone, so...
Did you check the windows device manager to see if Windows has a driver for the phone installed? Or is there an exclamation mark in device manager meaning that there isn't a driver for it? Windows drivers can be a pain so I used my Linux system to reflash and root my phone.
Did you enable developer options on the phone?
Go to the settings menu, and scroll down to "About phone." Tap it.
Scroll down to the bottom again, where you see "Build number." (Your build number may vary from ours here.)
Tap it seven (7) times.​You can find some posts about getting adb working on your phone in this thread, if you need them, even though you can't root your updated phone using that method: https://forum.xda-developers.com/r1-hd/how-to/twrp-how-to-root-t3425677
Once you can see your phone with 'adb devices', then see mrmazak's post here: https://forum.xda-developers.com/showpost.php?p=73582720&postcount=18
Click to expand...
Click to collapse
Thanks god!
Finally, my device is showing up on "adb devices" when I used another Win 7 laptop.
Probably, the reason I could not make it is because driver is not correctly installed.
Now, I have followed thread https://forum.xda-developers.com/r1-hd/help/remove-ads-fresh-blu-r1-hd-t3654431/page2 #12 and remove all amazon apps, and I feel so good!
Thanks yaconsult, mrmazak and kameleon25 very very much! You guys helped me a lot!
I wish you guys have a great long weekend!
There is still one thing left:
Does anyone knows how to remove this "Discover your next favorite book"?
I guess it is a lock-screen wallpaper, and wonder whether there is a chance to replace it or remove it.
I did some google, however have not found an answer yet.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i need help R1 HD

I have R1 HD R0030UU
its friends phone he get OTA when installed OTA the phone get bootloop and can get recovery and fastboot but I can't use SPFT to flash the phone its restart before when the red line finish on SPFT I tryed to unlock bootloader with fastboot OEM unlock but its failed is there any way to get back with the stock recovery or fastboot command
I have all drive NEEDS on my PC if there any way to use SDCARD to flash
Thanks all
This is photo of recovery may help you to help me get it back
KARIM9377 said:
I have R1 HD R0030UU
its friends phone he get OTA when installed OTA the phone get bootloop and can get recovery and fastboot but I can't use SPFT to flash the phone its restart before when the red line finish on SPFT I tryed to unlock bootloader with fastboot OEM unlock but its failed is there any way to get back with the stock recovery or fastboot command
I have all drive NEEDS on my PC if there any way to use SDCARD to flash
Thanks all
Click to expand...
Click to collapse
only thing you can do with stock recovery is factory reset.
Was phone bootloader unlocked before the ota.
If so bootloop is normal after OTA, except usually it will not open recovery only fastboot.
did you try "fastboot OEM unlock" like you put above or
"fastboot oem unlock" like it supposed to be?
mrmazak said:
only thing you can do with stock recovery is factory reset.
Was phone bootloader unlocked before the ota.
If so bootloop is normal after OTA, except usually it will not open recovery only fastboot.
did you try "fastboot OEM unlock" like you put above or
"fastboot oem unlock" like it supposed to be?
Click to expand...
Click to collapse
Thanks for reply no I think it was not unlocked bootloader before OTA
I try factory reset from stock recovery but not fix bootloop
"Fastboot OEM unlock" not working when pres V up to confirm unlock on phone its say fail back to fastboot 3se
I think if I can get full OTA update zip file for R0030UU can I update with stock recovery
When use flash tool I get this error
S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
KARIM9377 said:
Thanks for reply no I think it was not unlocked bootloader before OTA
I try factory reset from stock recovery but not fix bootloop
"Fastboot OEM unlock" not working when pres V up to confirm unlock on phone its say fail back to fastboot 3se
I think if I can get full OTA update zip file for R0030UU can I update with stock recovery
Click to expand...
Click to collapse
the updates are incremental, and it checks md5sum of every file on /system before doing the install, so if ota was stopped halfway you might be "borked"
also will need to know the version it was on , in order to get correct update.
here is link for the v17 to v21 update
http://hwfotadown.mayitek.com/ota/r...RIC_6.0_20170505-17451495815395129/update.zip
mrmazak said:
the updates are incremental, and it checks md5sum of every file on /system before doing the install, so if ota was stopped halfway you might be "borked"
also will need to know the version it was on , in order to get correct update.
Here is link for the v17 to v21 update
http://hwfotadown.mayitek.com/ota/r...ric_6.0_20170505-17451495815395129/update.zip
Click to expand...
Click to collapse
r0011uu is it working on r0030uu ?
KARIM9377 said:
r0011uu is it working on r0030uu ?
Click to expand...
Click to collapse
not sure. All my links are for either r0011uu or r0010uu.
r0011uu= non prime 16gb version
and
r0010uu= prime 16 gb version
Be AWRAE all the updates flash a new preloader that intentionaly blocks spft. and gives the error you have
so any update takes flash tool away
still no fix
mrmazak said:
not sure. All my links are for either r0011uu or r0010uu.
r0011uu= non prime 16gb version
and
r0010uu= prime 16 gb version
Be AWRAE all the updates flash a new preloader that intentionaly blocks spft. and gives the error you have
so any update takes flash tool away
Click to expand...
Click to collapse
still no fix try with all OTA file but not work and i cant find OTA or firmware for R0030UU 16GB 2G RAM I think i have v6.6 on it because not accept flash with SPFT
THIS is my getvar all
C:\adb>fastboot getvar all
(bootloader) max-download-size: 0x800000
(bootloader) partition-size:flashinfo: 1
(bootloader) partition-type:flashinfo: r
(bootloader) partition-size:userdata: 32
(bootloader) partition-type:userdata: ex
(bootloader) partition-size:cache: 19000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: a700
(bootloader) partition-type:system: ext4
(bootloader) partition-size:metadata: 25
(bootloader) partition-type:metadata: ra
(bootloader) partition-size:nvdata: 2000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw dat
(bootloader) partition-size:tee2: 500000
(bootloader) partition-type:tee2: raw da
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw da
(bootloader) partition-size:keystore: 80
(bootloader) partition-type:keystore: ra
(bootloader) partition-size:secro: 60000
(bootloader) partition-type:secro: raw d
(bootloader) partition-sizeemkeystore:
(bootloader) partition-typeemkeystore:
(bootloader) partition-size:seccfg: 8000
(bootloader) partition-type:seccfg: raw
(bootloader) partition-size:expdb: a0000
(bootloader) partition-type:expdb: raw d
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw da
(bootloader) partition-size:recovery: 10
(bootloader) partition-type:recovery: ra
(bootloader) partition-size:boot: 100000
(bootloader) partition-type:boot: raw da
(bootloader) partition-sizeara: 80000
(bootloader) partition-typeara: raw da
(bootloader) partition-size:lk: 80000
(bootloader) partition-type:lk: raw data
(bootloader) partition-sizerotect2: a0
(bootloader) partition-typerotect2: ex
(bootloader) partition-sizerotect1: a0
(bootloader) partition-typerotect1: ex
(bootloader) partition-size:nvram: 50000
(bootloader) partition-type:nvram: raw d
(bootloader) partition-sizeroinfo: 300
(bootloader) partition-typeroinfo: raw
(bootloader) partition-sizereloader: 4
(bootloader) partition-typereloader: r
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) kernel: lk
(bootloader) product: P6601
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.078s
KARIM9377 said:
still no fix try with all OTA file but not work and i cant find OTA or firmware for R0030UU 16GB 2G RAM I think i have v6.6 on it because not accept flash with SPFT
THIS is my getvar all
C:\adb>fastboot getvar all
(bootloader) max-download-size: 0x800000
(bootloader) partition-size:flashinfo: 1
(bootloader) partition-type:flashinfo: r
(bootloader) partition-size:userdata: 32
(bootloader) partition-type:userdata: ex
(bootloader) partition-size:cache: 19000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: a700
(bootloader) partition-type:system: ext4
(bootloader) partition-size:metadata: 25
(bootloader) partition-type:metadata: ra
(bootloader) partition-size:nvdata: 2000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw dat
(bootloader) partition-size:tee2: 500000
(bootloader) partition-type:tee2: raw da
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw da
(bootloader) partition-size:keystore: 80
(bootloader) partition-type:keystore: ra
(bootloader) partition-size:secro: 60000
(bootloader) partition-type:secro: raw d
(bootloader) partition-sizeemkeystore:
(bootloader) partition-typeemkeystore:
(bootloader) partition-size:seccfg: 8000
(bootloader) partition-type:seccfg: raw
(bootloader) partition-size:expdb: a0000
(bootloader) partition-type:expdb: raw d
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw da
(bootloader) partition-size:recovery: 10
(bootloader) partition-type:recovery: ra
(bootloader) partition-size:boot: 100000
(bootloader) partition-type:boot: raw da
(bootloader) partition-sizeara: 80000
(bootloader) partition-typeara: raw da
(bootloader) partition-size:lk: 80000
(bootloader) partition-type:lk: raw data
(bootloader) partition-sizerotect2: a0
(bootloader) partition-typerotect2: ex
(bootloader) partition-sizerotect1: a0
(bootloader) partition-typerotect1: ex
(bootloader) partition-size:nvram: 50000
(bootloader) partition-type:nvram: raw d
(bootloader) partition-sizeroinfo: 300
(bootloader) partition-typeroinfo: raw
(bootloader) partition-sizereloader: 4
(bootloader) partition-typereloader: r
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) kernel: lk
(bootloader) product: P6601
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.078s
Click to expand...
Click to collapse
dont think there is anything you can do.
Contact "Blu" customer service, maybe they will send you a repair file or let you send it in for repair. The phones have 1 year warrenty
BLU R1 HD won't turn on
KARIM9377 said:
I have R1 HD R0030UU
its friends phone he get OTA when installed OTA the phone get bootloop and can get recovery and fastboot but I can't use SPFT to flash the phone its restart before when the red line finish on SPFT I tryed to unlock bootloader with fastboot OEM unlock but its failed is there any way to get back with the stock recovery or fastboot command
I have all drive NEEDS on my PC if there any way to use SDCARD to flash
Thanks all
Click to expand...
Click to collapse
Hey guys, my BLU HD has stopped working and it is just stuck whit white screen blu logo, I tried hard reset from recovery mode and unlock bootloader with fastboot but nothing has changed. Can somebody help me, please?

[Solved] A7600-F: How to flash TWRP when recovery partition doesn't support flashing

Hey there,
Spoiler: Edits
- I just hit in "fastboot reboot" and the device rebootet. So the fastboot might not be broken.
- used "fastboot flash recovery twrp.img", it returns me "Partition "recovery" not support flash"
- Added a Spoiler with returns of fastboot
- Added the try "fastboot boot twrp.img"
- added the solution
Spoiler: erased because of edits
if I turn my device into the fastboot mode, it seems to stuck while loading. First my steps and the Interface that I can see.
1. Starting the device while holding Vol+ and Power
2. Selecting fastboot
3. See "FASTBOOT mode..."
First Question: Do I get any other interface, when fastboot mode is started? In general there is a different image shown.
My overall aim is to intall twrp (and lineage os). So I installed a driver set for this device and the latest adb-toolset. Starting the fastboot mode, I'll try to turn over some fastboot commands, like "fastboot oem device-status", but there is no response.
If I use "fastboot devices" my device is shown in the list. My (windows 10-)hardware manager doesnt return any devices with driver errors. But, the tab is shown as a device by tp-link.
Could someone help me to get twrp installed?
I've rooted the tablet by kingoroot. (I know about) There are no sensible dates on and I'm ok with unrooting as well as reinstalling all stock-roms before installing lineage. Just wanted to be sure, that the environment is open for all activities to get twrp running.
My question turns into "how to flash twrp, when the recovery doesn't support flashing"?
When I use "fastboot flash recovery twrp.img", it returns me "Partition 'recovery' not support flash"
Thank you for your time and help
Edit:
Spoiler: return of fastboot getvar all
(bootloader) partition-size:userdata: 32000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 10000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: 4c800000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:expdb: a00000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:flex: 2800000
(bootloader) partition-type:flex: ext4
(bootloader) partition-size:resv: 80000
(bootloader) partition-type:resv: raw data
(bootloader) partition-size:ebr2: 80000
(bootloader) partition-type:ebr2: raw data
(bootloader) partition-size:logo: 300000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:misc: 80000
(bootloader) partition-type:misc: raw data
(bootloader) partition-size:sec_ro: 600000
(bootloader) partition-type:sec_ro: ext4
(bootloader) partition-size:recovery: 1000000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-size:uboot: 60000
(bootloader) partition-type:uboot: raw data
(bootloader) partition-size:seccfg: 20000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-sizerotect_s: a00000
(bootloader) partition-typerotect_s: ext4
(bootloader) partition-sizerotect_f: a00000
(bootloader) partition-typerotect_f: ext4
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-sizero_info: 300000
(bootloader) partition-typero_info: raw data
(bootloader) partition-size:ebr1: 80000
(bootloader) partition-type:ebr1: raw data
(bootloader) partition-size:mbr: 80000
(bootloader) partition-type:mbr: raw data
(bootloader) partition-sizereloader: 1400000
(bootloader) partition-typereloader: raw data
(bootloader) kernel: lk
(bootloader) product: LVP9_ROW_WIFIONLY
(bootloader) version: 0.5
all: Done!!
Finished. Total time: 0.109s
If I try to temporarly boot from the twrp-image, this is happening:
"fastboot boot twrp.img" (imagine the image is called twrp)
Sending ... ok:
Booting ........ (nothing happens, neither on the tablet, nor the command line)
Edit:
Found a solution. Following this steps will help: https://forum.xda-developers.com/t/...-lenovo-a7600-f-mt6582.3895322/#post-78799763

Categories

Resources