Dialer Isuues on OP3T Beta 19 - OnePlus 3T Questions & Answers

I am not sure if this has been discussed earlier but here it goes.
I had this problem from the very first day but I've started feeling more and more frustrated because of this.
When I search a contact from the dialer, it searches by the first letter of every name.
It completely ignores a contact if it matches the search term exactly.
Putting this into an example:
'Raj Bhai' is a contact name and if I type '725' for 'Raj', the contact lies far down the list.
whereas if I type '72' it shows as the first contact.
Also frequently used contacts search much quicker of any other phone but this phone doesn't seem to learn from the habits.
Anybody can think of a better way to deal with the stock dialer ?
Thanks

Related

ADDRESS BOOK & OTHER PROBS FACED SINCE GETTING KAISER!-1st TIME HTC USER, NEED HELP!

ADDRESS BOOK & OTHER PROBS FACED SINCE GETTING KAISER!-1st TIME HTC USER, NEED HELP!
Hey Everyone..
Have major probs with the following:
1) You can't have more than one mobile number per person. Some people have more than one number
2) Being able to create lists for purpose of emailing or texting a list. I mean you can create categories but you cant use the categories for anything apart from filtering your address book!???
3) Also being able to insert a number from your phonebook within a message (without sending a vcard)
4) When you slide out the keyboards, my appointments cant be seen on the screen (if held vertically you normally can, but when keyboard out you cant, well you can see the top of the text for this only) and you cant scroll down to see it neway but you should be able to see this only on the one page.
5) Speaker phone microphone doesnt work properly. People complain they cant hear me!
Anything out there to solve these?
Really appreicate your help.
1) You can't have more than one mobile number per person. Some people have more than one number
There more than 1 spot for phone #'s. work tel, mobile tel, home tel, car tel, company tel, work2 tel, home 2 tel. If someone you know has more than 7 phone #'s, and you didnt get them on the first 7 phones, they're probably dead in a gutter anyway.
2) Being able to create lists for purpose of emailing or texting a list. I mean you can create categories but you cant use the categories for anything apart from filtering your address book!???
Create lists for emailing or texting? Not sure what you mean here. But when sending email or texts, click on the "To:" and it will bring up your address book and you can add to your list of people getting it.
3) Also being able to insert a number from your phonebook within a message (without sending a vcard)
Pull up contacts. Select|copy| paste. It's just like windows XP.
4) When you slide out the keyboards, my appointments cant be seen on the screen (if held vertically you normally can, but when keyboard out you cant, well you can see the top of the text for this only) and you cant scroll down to see it neway but you should be able to see this only on the one page.
5) Speaker phone microphone doesnt work properly. People complain they cant hear me!
The speaker phone sucks on these phones and has since the first generation. Learn to not use it.
Hey Cheers for your reply,
in regards to your answers
1) Yep, I know you can put more than one number within that section, but lets say they have 2 mobile numbers (which many do these days to save money). Then if you put it within the home field you cant text it...?? Again anything that can be uploaded to improve this?
2) In terms of lists. On virtually every other fone..nokias, sony ericssons PDA phones, samsungs etc. You have the capability of making a list. i.e. if you are messaging the same group of people on a regular basis...e.g. for work you deal with a group of 10 contacts for a certain issue..you can select that list and it will come up with contacts in the "to" bit without selecting the contacts individually all the time..this is usually basic functionality in most phones to do this for texting and emailing..but surprised the Windows mobile doesnt have this. Its a function I have used a lot...so wondering if there is any program or something which can be uploaded to improve this?
3) With the copy and paste function tried it..and didnt work..even if it did.. it is really impractical..imagine you are writing a text to someone..Hi.blah blah blah..btw the number of ... is...and then as most phones again have..which is really basic..there should be an insert number from phonebook..but instead you have to come out of the whole text..go to the phonebook (which i have done btw)..copy the number..but guess what..as soon as I go back to the text..it doesnt allow me to paste it! Basic functionality problem there
4) Any body got a response to my number 4 above?
5) Yep thats what im trying to do
Thanks for your help..and appreciate if anybody has more suggestions for the above
1) Yep, I know you can put more than one number within that section, but lets say they have 2 mobile numbers (which many do these days to save money). Then if you put it within the home field you cant text it...?? Again anything that can be uploaded to improve this?
You can definately text the second, third, or whatever number in your phone book. Create your message and rather than starting to type the name of your contact into the 'To' field, click in the empty 'To' field to bring up the address book. if you select a contact with more than one phone number, a box will pop up asking you which number you want to use.
2) In terms of lists. On virtually every other fone..nokias, sony ericssons PDA phones, samsungs etc. You have the capability of making a list. i.e. if you are messaging the same group of people on a regular basis...e.g. for work you deal with a group of 10 contacts for a certain issue..you can select that list and it will come up with contacts in the "to" bit without selecting the contacts individually all the time..this is usually basic functionality in most phones to do this for texting and emailing..but surprised the Windows mobile doesnt have this. Its a function I have used a lot...so wondering if there is any program or something which can be uploaded to improve this?
You're right - it's a pretty common fuction and WM6 should have it. There may some commercial app available but I'm not aware of anything.
3) With the copy and paste function tried it..and didnt work..even if it did.. it is really impractical..imagine you are writing a text to someone..Hi.blah blah blah..btw the number of ... is...and then as most phones again have..which is really basic..there should be an insert number from phonebook..but instead you have to come out of the whole text..go to the phonebook (which i have done btw)..copy the number..but guess what..as soon as I go back to the text..it doesnt allow me to paste it! Basic functionality problem there
I normally try to get the phone number before starting the text! it's then so much easier to insert when you're writing your text. Again, it's a pity this fuctionality isn't built in.
4) When you slide out the keyboards, my appointments cant be seen on the screen (if held vertically you normally can, but when keyboard out you cant, well you can see the top of the text for this only) and you cant scroll down to see it neway but you should be able to see this only on the one page.
You mean the HTC home plugin takes up to much room? Yep, it does! But then you don't need to use it. Experiment with different home screen plugins from SPB software, such as SPB diary, SPB shell etc. You should be able to find something to suit you.
5) Speaker phone microphone doesnt work properly. People complain they cant hear me!
The speaker phone sucks on these phones and has since the first generation. Learn to not use it
5) Yep thats what im trying to do
The speakerphone sucks? Does it? I don't use it, but will have to test it now!
HTC
FrankyG
3) With the copy and paste function tried it..and didnt work..even if it did.. it is really impractical..imagine you are writing a text to someone..Hi.blah blah blah..btw the number of ... is...and then as most phones again have..which is really basic..there should be an insert number from phonebook..but instead you have to come out of the whole text..go to the phonebook (which i have done btw)..copy the number..but guess what..as soon as I go back to the text..it doesnt allow me to paste it! Basic functionality problem there
I agree its a little inconvenient, but if your a fast user you can easily tap the windows key then contacts then quickly locate the contact, copy the number and then paste it into the msg (by hitting start then messages or the message button on the phone itself).
# 4 You need some software like SPB Mobile Shell (search for the thread called post a picture of your today screen). Because there is no current way to decrease the size of the clock. You can disable the HTC Home plug in (clock and sms/phone/email notification icons) then the whole screen will be the bottom part, but you forego the cool weather/launcher/profiles/today plugin of HTC.
# 5 speaker phone like camera plain SUCKS!!!

Cant paste telephone numbers on dialpad or dial from within e-mail calendar??

Anyone been able to work a fix for this? WM 6 would underline numbers in received e-mail, calendar etc etc one could dial the numbers directly from within the mail?
The paste function has also been removed from the dialpad
ROM 1.37.421.3
This thread has an interesting solution.
http://forum.smartphoneexperts.com/showthread.php?t=165787&highlight=dial
Surur
this is bugging me bigtime!
im going try change the phone skin to the old wm6 version with advanced config, seeing as the function was there before on older phones then it should work here too.
can someone provide a solution??
The same problem for me.
I realized that when you have the status opened (it opens while you are talking) in the menu you have the paste option... but it is useless.
I also want to paste some numbers in the phone to call them... it is very annoying not to have this option (sometimes I need to copy also some numbers from internet pages... but now it is impossible!!!).
Can someone help?!?
Thnx.
Urosh
Hi Surur,
Good one thx for the link, i think this was a serious oversight from MS, this is the one reason i would chuck the phone.
So far i have enjoyed the phone, i think it works well, but as i said its virtually useless if you cant paste numbers on the dialpad.
This limitation is really annoying me now; and still, a month down the line it's the only unforgivable problem I have with this otherwise fantastic little phone.
I was hoping it was a simple oversight, and would have been fixed by now. Has any of the later ROMs addressed the issue? If not, has anyone came up with a solution, or at least a realistic work around that doesn't involve pen and paper?
for over 3 years i am using a dialer "contact breeze".
the dialer himself is also of value but i am reinstalling it each time only for this tweak. long press anywhere in a meeting or task and it will offer any of the telephone numbers in it. no need of any other spaces, tlf:, etc. just type the number and it will be offered for dialing after a long press. the prog cost a few $. it worth it!
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
studz said:
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
Click to expand...
Click to collapse
Yes. Anyone?

Is there speech to text software for WM6?

Ive seen speech to text software for Pc's and desktops but i wanted to know if there is speech to text software especially for GPS software like TOM Tom7 so i can just say street address instead of typing them while im driving...will make alot of things easier for me while driving.
you seruous..141 people lookedat this and nobody has any clue of if there is speech to text software..like the one for PC that does the alien voice
this question has been asked before and it seems as if the answer is no.
http://forum.xda-developers.com/showthread.php?t=384503
However a work around that would involve time consumption and copy and paste, but would work for emails and text - would be signing up for a Jott.com account. Its free and essetaily you call a dedicated number for your account talk to the system and then it emails you a copy of the chat you just had. You could then pull up the email assuming you have it set up on your phone, copy and paste. This is a lot of work to simply be lazy not to type it, and i guess the fact you're copying/pasting negates the whole concept of dictating so that you do not have to type anything, but hey it would work. Just not so much for TOM TOM7. there i would recommend a service like telenav.com. they have a function on their gps software that allows you to dictate to it your destinations and so forth.
Only responding because no one else has. Don't consider myself to be an expert in this arena, but I remember this question being asked and researched several months ago. As I remember (at that time) no one found anything that is currently available.
Some interesting work going on out there - http://www.digitalfuturesoft.com/texttospeechproducts.php and I currently use Jott (not something that would work for what you're looking for, but a great service). Sorry I couldn't be more helpful - hope someone gives you (and me) a better answer.
haha funny as i was editing about Jott it was also recommended, awesome.
This is a link about a regular cell phone a few years ago that had this type of technology. You would think it would be available for PPC.
http://gigaom.com/2005/04/19/samsungs-p207-speaks-out/
Has anyone seen this?
http://www.crunchbase.com/company/yap
Anyone know if this is available for download anywhere? Looks like a great application, like vlingo for Blackberry.
Text to Speech SMS Reader (freeware)
Was searching for a text to speach SMS Reader on xda, didnt find one, looked elsware and found this freeware:
h##p://###.blondiesoft.com/software/mobile/TellMeText
replace # sign and download.Works really well on my HTC Gene
Sorry if its a repost....
there any chinese speech soft ware for text message .
but you can't speak chinese.
i am sorry guy ~
hmmm
shariquez said:
Was searching for a text to speach SMS Reader on xda, didnt find one, looked elsware and found this freeware:
h##p://###.blondiesoft.com/software/mobile/TellMeText
replace # sign and download.Works really well on my HTC Gene
Sorry if its a repost....
Click to expand...
Click to collapse
thats the opposite of what he was looking for...im tryin to find the same thing...
my friend has it on his evo...he says what he wants the text to say and it writes it for him
TextSpeech Pro
Would this work
http://www.textspeechpro.com/
did anyone know any voice synthezator for HTC TYTN II?
I woudl like to use with different text sources like reading articles, emails, websites etc.
Is it possible to talk to phone to dial a number without earlier recordings? I have 500+ contacts and would like to talk to handfree kit.
[plaese help
moegdaog said:
Ive seen speech to text software for Pc's and desktops but i wanted to know if there is speech to text software especially for GPS software like TOM Tom7 so i can just say street address instead of typing them while im driving...will make alot of things easier for me while driving.
Click to expand...
Click to collapse
Hello guys, It happens for me to be blind (not completely) so I know about TTS software. The only one good is the “Mobile Speak” from “CodeFactory”. There are some problems with this software for example:
1) It is not free.
2) It is expensive.
3) It can not be cracked (as I know).
4) It works with sim car lock.
5) It can not help you with the GPS because it can not read graphics. You need a GPS software that displays some messages as text and not graphics.
I hope I helped you.

Change View of Contacts - AAARRRRGGGHHHH!!!

Hi Guys
Im loving my XDA Ignito (removed o2 Rom, now just like a HTC Diamond)
The contacts are displayed "surname, first name" this is soooo frustrating !! Please please could somebody help me convert my contacts to "first name, surname" I have roughly 220 numbers.
Thanks
Adam
Change the "File As" field in each contact. You might be able to do this in Outlook too.
umm... why is this such a problem?!?
are people too stupid to remember a surname?
my friend, when you only have 10 friends, as you must with responses like that, it probably isn't.
On the other hand when you have several Samantha's and such on the phone it can be.
So I would still appreciate some help please.
Cheers
fair enough, but i find it easier to go by surname (and i have many Chris' for example, and it is easier just to go to the one person with that one surname than scroll thru loads of Chris' to find the one with the right surname?!!?!?!?!
i think you will find that ur answer does not make sense.
and on this n00bish argument, there are fricking hundreds of threads about this, so sorry if i'm starting to get pissed off with the question.
Just use the smart dial feature, i have exactly the same problem as you, but i cannot/will not sit there and edit, in my case 286 contacts because microsoft is stupid.
i mean really, if they can file them the wrong way round, surely there is an option to file them correctly, i have been saying this since WM5!!!
NOTHING WILL GET DONE, and i dont think it will
Sorry, guess with frickin hundreds of threads on this there must be frickin hundreds of other people who aren't quite as clever at remembering surnames as you.
Thanks for the help.
Am I talking to myself? Edit the contact and change the File As. All my contacts are firstname lastname.
indeed.
there is no answer to this, most people with technology are used to it.
only Nokia 3310 still have first name first.
why dont u just type the name in one line?
Ruffage, I did try this but unfortunately "file as" only give me one option, i.e. "Smith;John/1"
mugglesquop - Have you nothing better to do than waste my time & yours by writing useless sh*t... F*ck off
usless sh*t??
i told you there is no way of changing them all (AFAIK, and i have read a lot of threads on this)
i also told you a way of storing contacts in the way that you want for future use.
useless?
There must be a way of doing this!!
Also if I do what you said for the future, then I would have half my contacts "firstname, surname" & half "surname, first name" how confusing would that be??
adam-silver said:
Ruffage, I did try this but unfortunately "file as" only give me one option, i.e. "Smith;John/1"
Click to expand...
Click to collapse
Hmm your contacts are messed up then. I get the choice of both ways to display. Perhaps the name is in one field only in Outlook? Can't check here as I'm not at home atm.
When i go to the properties of the contact, there is only a "Name Field" not a First & Last name field.... hmm ?
adam-silver said:
When i go to the properties of the contact, there is only a "Name Field" not a First & Last name field.... hmm ?
Click to expand...
Click to collapse
It displays like that by default, but there should be a drop down arrow at the right hand side of the Name field and, if you tap that, it'll pop up a further box which shows how the name is actually formatted with the fields Title, First, Middle, Last, Nickname and Suffix.
I changed all my contacts such that only the First name field was populated and had their entire name in there (i.e. "First: John Smith") and that means they all come out as you want with their first name displayed before their last name. That doesn't really help you too much though because you'd have to manually reformat all your contacts which is annoying I know.
Medulla, thanks for that!
I suppose I will just have to spend an hour doing it...
use smartdial or use contact search! why would you want to scroll through a 200 people contactlist?
Thom4s said:
use smartdial or use contact search! why would you want to scroll through a 200 people contactlist?
Click to expand...
Click to collapse
to show off that he has sooo many contacts apparently
i have to use the recent call list far too many people otherwise
This isnt just me showing off how many people i have in my phonebook (as you say) its obvisouly a common problem otherwise there wouldnt be so many posts about it.
Anyway, it was my old phone what f*cked it up, instead of "first" or "last" name it only put it under "name", so spent an hour or so editing them... now spot on. Also under stand the "file as" now too.
Thanks for all your help (or not for some people)
Cheers
Adam

[Q] Dialer 2.2 Contact Spacebar

The stock dialer is clean so I like using it. But there is the limitation of first name searches only. The big problem as a result is, if a contact is saved as J Doe, upon entering 5/JKL on the Keypad, it gives you all the JKL's and the contact is impossible to locate.
If there were a way to then add a space one could go on to seach for DOE, but JDOE will give no results.
Any ideas?
You are right, lack of a spacebar is a major limitation and they did not resolve that even in the latest firmware. You will have to use the Contacts app, no other way
How very annoying. I was hoping someone would have a workaround by now.

Categories

Resources