Related
I have been asked by @ZEROLEMON_OFFICIAL to start a thread for the purpose of posting reviews of their Ultra Glass Armor 9H tempered glass screen protectors for the HTC M8.
***DO NOT START A SEPARATE THREAD FOR THE PURPOSE OF WRITING YOUR OWN REVIEW. ALL REVIEWS OF THIS PRODUCT SHOULD GO IN THIS THREAD ONLY. ALL OTHERS WILL BE REMOVED BY THE MODERATION TEAM***
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged and included everything to install the screen protector. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Magnum_Enforcer said:
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Click to expand...
Click to collapse
Thanks for your feedback. The pull tab-style sticker should be able to stick on the film so the film will be easy to peel off. Maybe you are just unlucky, sorry. Below is the revised version of instruction which will be applied to the new batch.
1.Please wipe off all fingerprints and oil stains from the screen with the included alcohol swab. Wipe the screen with the included microfiber cloth for drying.
2.Place phone on flat surface with screen facing up. Peel the first plastic adhesive off and align the screen protector edge with the phone's edge.
3.Gently place the screen protector on the screen. The screen protector will automatically adhere to the surface of the screen.
4. If there are bubbles between the screen protector and the phone, please use a flat card to gently push out the bubbles to the edge of the phone.
5. Installation complete.
Those instructions are much better:good:
OMG INCREDIBLE!! Of all the shields I have had, this is surely my last from anyone. I am sticking to Zerolemon from now on. My other shields was fingerprint magnets, not this one. Easy to put on, and thinner than any other shield. Here is my 5 Star review from Amazon:
""I got the shield today, it was a snap to install. Thinner than my Chinese shield, and surprisingly almost fingerprint proof. The one thing I hated about my last shield was it attracted all my fingerprints. I always was cleaning it. But this one doesn't seem to even know my fingers even touched it. I can see the prints after heavy use, but so easy to clean, and barely visible, it is remarkable. This has got to be the best shield out there. And I have had one on all my phones. But now, this is probably going to be the only one I will have in the future. It's like touching the glass without any shield. Only con is that it seems to attract dust. But given that it is so invisible to the sight and touch a little POOF and no dust at all, I think it is static, because it is new, and will soon wear off. But if you need a shield, heck, YOU DO NEED A SHIELD!! This is the one to buy...""
This has attracted my attention. It is the best one I have ever had on any of my phones. (Now if you can make those camera lens covers from this material, I would be extremely happy) :laugh:
I received mine on Saturday. Beautiful packaging. The instructions where a bit on the small side, but its pretty self explanatory. The application went well enough, but keep in mind that this glass seems to be cut exactly the same size as the glass on the M8. So when you start to apply it make sure it starts exactly where it does on the phone. If you are even a little pulled away from the start of the glass on the opposite side of the glass it wont stick down because it will be slightly on the speaker grill. After getting that straightened out it looks incredible. For the price you cant go wrong.
Anyone who knows how to take care of a phone knows you need a screen protector.
Scratch proof glass just isn't after enough time has passed. But there's a reason manufacturers stick with glass for screens. It's tactile, your finger glides over it with silky precision. It gives the phone a solid and dependable touch to it. A solid reassurance. Most importantly, glass gives the best transmission of light from the underlying pixels so it makes the display look vibrant.
Then you have to slap some cheap plastic on top of it, This was far easy to apply to the phone. The glass and the phone join together like magic, after you have aliened it over the phone the two bond together, the Best part is there isn't a bubble beneath it, which I can't stand in plastic screens.
This is a revolutionary product. I love it. There are only a few cons to having this is an ever so slight increase in thickness in your phone. Plastic screen protectors are negligibly thick but glass has to be a bit thicker to be effective. Personally, I like the added thickness, modern phones are, to me, increasingly flimsy feeling. This gives it a bit more substance (My case still fits without issues as-well). I have also found 2 out of 4 corners are a little sharp and could of been slightly more rounded.
Overall this is one amazing screen protector and I look forward to showing it off on my phone.
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I have had the Nilkin on my M8, saved the screen when it fell on the floor when I was in the doctors office. But it was thicker, and always showed my fingerprints. This screen (Even though I didn't pay for it) is the best I have had. I have had tempered glass on my screens for a couple years, almost always the cheap ones from China that takes 6+ weeks to get here. This one is local and cost is similar, would I have bought it? I don't normally shop Amazon, so unless it was on eBay I probably would not, unless I seen it on someones device, or at least heard good news about it. I didn't even know that the glass resist fingerprints. Would I but another? Yep... I have already showed it to a friend, and she is going to get her M8 this weekend and order this shield. Because it is a lot better than the one on her M7. So even though you might think that the review is biased because it was free, it isn't. It is a good shield and not bad on the price either.... :good:
I got mine in the mail today.
1. It is awesome. It covers the entire glass portion of the front of the phone. Not just the active LCD area.
2. It is extremely smooth. This makes it feel as if it is not there.
3. It's oleophobic coating is superb. Haven't seen a single finger print.
4. It is extremely clear, I cannot tell it is there.
5. I have it paired with the Otter box symmetry case and feel as if my phone has the ultimate protection.
6. The only draw back was during the installation I kept getting a raised corner. This was because Tue glass is cut to very small tolerances and matches the M8's screen perfectly. I had to slow down and focus on what I was doing.
All in all I am pretty happy with it and will be buying a second one to keep as a backup. I see this protector lasting the life of phone and keeping the resale value in since the screen will be in perfect condition whenever it is peeled off.
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I understand your concern. We are sending free samples in exchange for an honest review. We do not send samples to everyone, only legit users. You guys are welcome to compare our screen protector with other brands.
I have received my tempered glass protector from Zerolemon. Before I start I'll say that it was sent for review on condition that I review it. They told me to make an honest review, and never set any guidelines which leaves me to do and say whatever I'd like. I am in no way obliged to give a good review as they have nothing on me and have not told me otherwise.
The protector arrived in excellent, eco-friendly packaging that was simplistic yet effective in explaining what the product is and how to install it. Right away I could tell that the glass protector was of good quality and not simply a Chinese knock-off. I have used dozens of protectors including Spigen's $40.00 Nano slim, and this is comparable, if not better given the price.
The protector installed without a hassle, and aligned IDENTICALLY with my screen. The cut-out is perfect unlike other protectors, and offers maximum coverage with no exposed areas of the screen.
Included in the package are an anti-bacterial wipe and cloth to make sure you screen is very clean before installation. Once done, you take off the back film from the glass protector and simply let it adhere to the screen of your M8.
Again, this review was is in no way dictated by ZeroLemon, and I could of written anything I wanted. In fact, I already had another tempered glass protector installed so I didn't even need a 'free sample'.
I give this product a 10/10 simply because it's of top quality, and for the price, you cannot beat it.
I have recently received an ultra glass 9h tempered glass screen protector from zerolemon about a week ago. Upon first glance the packaging is well put together with the screen protector placed securely inside. The packaging comes with the tempered glass protector, a microfiber cloth, and an alcohol wipe to clean the screen off. The directions can be kind of confusing if you have never applied a screen protector or a glass screen protector before as they seem to be worded weird. If you apply to protector properly it looks extremely nice and feels as if there were no protector on it. The one thing I do not like about this glass protector is that it is a little on the thick side. With a case on the phone thou you don’t really notice how thick it is, but I do not use a case so I can feel the thickness of the protector. Without the case I need to be more careful when I put it and pull it out of my pocket to make sure that it doesn’t peel off or catch on the inside of my pocket. I have also noticed that this protector can have a little bit of glare in direct sunlight or light unlike the screen with no protector on it but it’s not that bad. All in all this a fantastic screen protector and for $8.99 you can’t really beat the price for any other screen protector, especially a glass protector. I would recommend this protector to anyone who wants to get a glass protector and give it shot!
What is the thickness of the protector?
suparnemo said:
What is the thickness of the protector?
Click to expand...
Click to collapse
0.3 I believe.
Sent from my HTC One_M8 using Tapatalk
Real World Use - PASS!!!
Ok, i was normally running naked since i've had my m8 and got a .10 cent chine film screen protector for a while but it fell off on one of my trips to the beach. I contacted zerolemon to inquire upon the free product.
Fast forward a week and i got it 3 days ago. Putting it on was a snap, its very precise with its cuts. My crappy chinese case was very close to not fitting but it did with a little adjusting.
Now yesterday at santa cruz my girlfriend put our phones on trunk lid area while we grabbed our stuff. She grabbed her phone and we started closing the lid and foolishly we slammed the trunk 2 times. i eventually notices my phone and immediately freaked out, but fortunately the only cracks was 3 in diff areas, and my actual screen was unharmed. If it wasn't for this product i would have a cracked phone right now and im still rocking my slightly cracked glass armor until i order a new one soon.
I'm giving this screen 10/10 across everything just for saving my ass. I highly reccomend this screen
Now that is a test I don't want to try. LoL
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
just lou said:
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
Click to expand...
Click to collapse
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Oditius said:
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Click to expand...
Click to collapse
Unbelievable. A "temp" review? Why not let people review the item after they actually use it, instead of telling people to leave 5 star reviews for an item they don't even have yet?
I know most of us (if not all) keep looking for that perfect tempered glass screen protector for our phones (not to mention that it has to be curved of course).
Today I received my Skinomi Samsung Galaxy S6 Edge tempered glass screen protector, and I'd be more than happy in sharing my review of the product.
Packaging:
Packaging is retail. I pre-ordered from their website directly (rather not deal with Amazon), and I got a cool coupon that saved me 25% .
What comes included is your screen protector, fiber cloth, alcohol cleaning cloth and dust lifter screen.
Installation:
I'm going to be completely honest here; This is my first time installing a tempered glass screen protector. Much less a dry installation. I've always used invisible shield for my previous devices so I was expecting a hassle. This was by far the easiest installation I've ever done. Super easy!
Fit:
The fit is not as great as I'd expect it to be. It doesn't cover the phone fully on the edges, you can still see some small space that's left uncovered (I've attached pictures for your leisure). I'm sure that I've installed it as best as humanely possible (actually quite proud of that haha).
The capacitive buttons on the bottom or probably my main issue; The cover completely warps them. The cutouts on the glass protector don't match the cutouts on the phone itself. This causes the buttons to look weird and warped when they light up. I personally don't care (now if this is a mistake and someone from Skinomi is reading this, then please reach out!), the case does what it's supposed to do, but I feel that it makes the fact you have a glass protector on your phone obvious.
Feel:
The protector feels great, you really can't tell there's something on top of your screen. Touch sensibility is weird around the middle towards the left edge on my particular protector (I do have to press slightly harder in order to get a response), but I'm having that after 24 hours that problem clears out.
Final thoughts:
I actually like the protector overall. It's not bad for the price I payed (although I was expecting a better fit for the buttons and a better fit around the screen itself). I'm guessing that as long as the screen protector doesn't come off like the Spigen one I would consider myself happy.
I know the pictures are not the greatest, but If you guys want better ones or different angles or something just let me know!
Hope this helps!
Are those glittery specks permanent?
Graffiti Exploit said:
Are those glittery specks permanent?
Click to expand...
Click to collapse
Yes they are.
I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk
Mikeonic said:
I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk
Click to expand...
Click to collapse
Exactly my thoughts. If the edges were more sensitive, I wouldn't care about the rest.
I'm very impressed with this tempered glass. SGP use to be my favorite for all my devices but I'll start considering Skinomi tempered glass going forward.
There are some sensitivity issues on the left side but hopefully that will go away once the glass settles in and will report back if it does or doesn't go away later in the week. What I mean is that I would have to press harder than normal.
Here is a pic with the glass before installation. I just realized I still had the clear plastic covering my lens after I took this picture and will add a few more pictures with it being installed once I borrow a colleagues camera phone.
It looks so beautiful once installed and no bubbles like the SGP curved one. TBH, hyped went away once I started to get sensitivity issues on the left hand side and hopefully it will go away after a few days.
EDIT: after re-aligning the glass, I don't have any sensitivity issues anymore. You might have to re-aligning it a few times if you're off. Don't worry, you won't lose any stickyness. This tempered glass is worth buying IMHO.
Ok, I've looked through forums, threads here and there, Amazon, manufacturer sites, web searches... and my takeaway is that glass protectors for the Note 5 are a problem... in particular the protectors don't fully cover the screen (just the flatter part) and there are halo effects. The non-curvature issue can also cause dust to accumulate, apparently, by getting into the edges.
Is there, in fact, ANY really great tempered glass screen protector that does the job?? One that fully fits the curves along of the Note 5's screen, has non-sharp edges, and isn't a headache to install or otherwise deal with? I see the same type complaints whether the glass protector is inexpensive or at the high-price end.
I have a new Note 5 arriving next week, and I'd love to know which are the top choices. Or, because of the curved screen, front side, is this just a holy grail search never to be reached?
My guess is that once manufacturer's continue to get feedback they will fix the issue, but it will take time and feedback from consumers. The device is fairly new so I would say in about another month or so the issues Should, or so I would hope, be ironed out. If you cannot wait, I would suggest getting a case with a built in screen protector. Give Artech21 a jingle, they have a case with a built in screen protector, and I believe they are still looking for testers for their cases. I am going to be receiving mine whenever they ship. At the moment it seems like September 30th, at least according to Amazon, but I hope to get one sooner than later.
Either way, a decent case and being careful will go far to help deal with your screen until, either manufacturers fix the issues, or you can get a case with a built in screen protector.
I bought the tempered glass screen protector at the T-Mobile store. Forget the brand, but came in a big green box, with a roller and bed like thing to put the phone in, and apply it dummy proof easy. It is on clear and zero bubbles, and can barely even see the protector whatsoever.
Skinomi.com is where I purchased mine. Absolutely perfect for my Tab S so I made the purchase for the Note. Also perfect in every way! I paid around 7 bucks through ebay
Sent from my SM-N920V using Tapatalk
Using an ismooth thats is awesome. Zero halo on it.
Zorachus said:
I bought the tempered glass screen protector at the T-Mobile store. Forget the brand, but came in a big green box, with a roller and bed like thing to put the phone in, and apply it dummy proof easy. It is on clear and zero bubbles, and can barely even see the protector whatsoever.
Click to expand...
Click to collapse
This is the screen protector your talking about http://www.pure-gear.com/shop-by-de...oll-on-kit-biodegradable-samsung-devices.html, Also cheaper direct through manufacturer by about $15. At any rate it looks like a good screen protector and very easy to apply. I may give it a shot once I get my device sorted out.
The Zagg glass from Verizon is a perfect fit, but if you have to be insanely accurate. If you are, the results are amazing. I read on another thread that version Best Buy carries does not fit well so I went straight to Verizon. Yes it's pricey but worth it. I'm used to staying under $15 for a glass one for my last few purchases. I purchased 2 backups (different manufacturers) for $3 total from Amazon with coupon codes, but it's good to know I won't need them. Let me know if you need pictures.
edit: For the most part, halos are causes by wrong cuts or if you are off by a hair in either direction. If applied correctly with the right brand, it should cover 100% of the flat area before the curve.
Thanks!
Pictures would be great!
Also... thanks everyone for the input so far! For the above-mentioned glass protectors, do they cover the curved part of the screen in a form-fitting way?
In the meanwhile, I've ordered from Amazon a couple of glass screen protectors as an inexpensive first step solution awaiting products that subsequently come out that may take advantage of user stories/input. The two are: (1) IVSO with lifetime warranty and (2) YooTech with lifetime warranty.
I also ordered three Note 5 cases from Amazon to try: (1) Spigen Air Cushion Slim Armor Case, Champagne Gold, model SGP11687; (2) Spigen Neo Hybrid Carbon Case, Gunmetal, model SGP11689; and (3) Urban Armor Gear Case, Black.
Unless I have totally overlooked it, you won't find a protector that covers the curve in a glass form. It wouldn't be physically possible since the glass protectors do not have any bend/give at the ends to cover the edges of the screen.
Looks to be possible
I wonder what might be the engineering reason for not producing a curved tempered glass screen protector. Cost perhaps? For example the screen itself is curved, why can't the protector be formed (molded in a sense) to mate to that? Search on "curved tempered glass" and you'll see that it is possible to create curved tempered glass.
Also, look up: "Cinder .2 mm Gorilla Glass Screen Protector for iPhone 6/6+" on YouTube (I'm new to XDA, can't post links yet!). This protector IS curved on the edges to follow the form of the phone. I'd love to see this for Note 5!
The Cinder is from Cupert. Check out Cupert (period) com.
malickie said:
This is the screen protector your talking about http://www.pure-gear.com/shop-by-de...oll-on-kit-biodegradable-samsung-devices.html, Also cheaper direct through manufacturer by about $15. At any rate it looks like a good screen protector and very easy to apply. I may give it a shot once I get my device sorted out.
Click to expand...
Click to collapse
i'm using this on my Note5, and so far, it's has the least amount of "halo" effect. probably .5 mm or less and barely noticeable unless you're looking for it; i can live with that for now. (see picture below) i used a T-Mo discount to purchase and have installed in the store. was told as long as i have my receipt they'll replace it if there's significant "halo".
EDIT: add picture
cortez.i said:
i'm using this on my Note5, and so far, it's has the least amount of "halo" effect. probably .5 mm or less and barely noticeable unless you're looking for it; i can live with that for now. (see picture below) i used a T-Mo discount to purchase and have installed in the store. was told as long as i have my receipt they'll replace it if there's significant "halo".
EDIT: add picture
Click to expand...
Click to collapse
Is this a glass or plastic protector? Their website mentions, "Smooth as glass"
LiquidCowbell said:
Is this a glass or plastic protector? Their website mentions, "Smooth as glass"
Click to expand...
Click to collapse
see picture
Zero haloing. It might look that way because of the angle I shot it (6 plus camera .. sadface)
Supersheild works fine.
Mixed reviews + hope for the future
For all of the above-mentioned glass screen protectors, when I look at their Amazon ratings, I see overall a mixed set of reviews, primarily around halo issues and the screen not fitting enough of the Note 5's glass, and with some users having complaints about installation. My conclusions so far: that this represents what's currently on the market. However, presumably there's hope for a better product, e.g., a Gorilla Glass thin, sleek glass protector that curves to edges and fully form fits the entire screen, as is the case with the Cinder product made for the iPhone (in which instance the holy grail seems to have been found). We now know that this appears to be possible for a large curved device (see the Cinder references/web site I mentioned above).
My hunch is that a fully form-fitting glass protector would also provide better shock protection for the screen versus one that doesn't fully mate to the screen, curves and all.
Zorachus said:
I bought the tempered glass screen protector at the T-Mobile store. Forget the brand, but came in a big green box, with a roller and bed like thing to put the phone in, and apply it dummy proof easy. It is on clear and zero bubbles, and can barely even see the protector whatsoever.
Click to expand...
Click to collapse
Can you confirm if it's actually glass? I was going to buy it (not from tmobile, $40 is robbery) but the "flexible" part is what threw me off. How can a tempered glass SP be flexible? The mfg website states that it's made of Polyethylene Terephthalate (PET).
shouren04 said:
Can you confirm if it's actually glass? I was going to buy it (not from tmobile, $40 is robbery) but the "flexible" part is what threw me off. How can a tempered glass SP be flexible? The mfg website states that it's made of Polyethylene Terephthalate (PET).
Click to expand...
Click to collapse
Really not 100% sure if it's true glass ?
http://www.pure-gear.com/puretek-roll-on-kit-antibacterial-antiglare-anti-fingerprint.html
Zorachus said:
I bought the tempered glass screen protector at the T-Mobile store. Forget the brand, but came in a big green box, with a roller and bed like thing to put the phone in, and apply it dummy proof easy. It is on clear and zero bubbles, and can barely even see the protector whatsoever.
Click to expand...
Click to collapse
I got the same one and yes it is dummy proof but the sides don't lay flat. It also gets greasy really easy. I've used this one http://www.amazon.com/Protector-Tem...pebp=1441665200689&perid=1CDB4C1PX00MRMTNJ7SD on other devices and it seems to work a lot better.
XtremeGuard. $7. Fast shipping. Great fit
Decided I shouldn't go without a screen protector, looks like the tempered glass ones won't work well because the screen in curved on the edges. Anyone have experience with or can recommend a good one? I often see suggestions on here that I couldn't find on my own and I'm thinking one of you guys can help.
By the way i went with this case:
https://www.amazon.com/gp/product/B01M15T2I3/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
I like it except that the camera and volume buttons aren't cut outs. It fits the phone well.
I appreciate any suggestions.
Same boat as you. The ones offered Amazon all seem to complain about them being too thin, bezel to bezel.
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
Would you mind posting some pictures of your screen protector? I'd love to see it.
hikihibiki said:
Would you mind posting some pictures of your screen protector? I'd love to see it.
Click to expand...
Click to collapse
Not a very good pic. Just used an old phone I had laying around buy hopefully it gives you some idea of how it sits.
http://www.dumpt.com/img/viewer.php?file=mcavzh8s6o1d51d9c95j.jpg
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
olegfusion said:
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
Click to expand...
Click to collapse
Nillkin has crappy cases for F5321 that offer little more than scratch protection, and you're incessant advertising for them across the all the device boards is obvious, so you can hardly be considered objective. Please go troll your mother and go away. There are people here looking for serious solutions.
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
I decided to go with the Skinomi as well, put it on my XC yesterday. Very happy with the results, it's been a while since I have used a non-tempered glass screen protector and for some reason I was expecting the touch screen to be hard to use and the experience generally unpleasant. This wasn't the case and it fits perfectly. recommended.
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
tlxxxsracer said:
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
Click to expand...
Click to collapse
I saw those but have seen to many negative things about G Color protectors to ever try one out myself. Lots of videos on youtube about them being crap.
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
enjoimadcow said:
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
Click to expand...
Click to collapse
Lol, I am positive I saw your review on Amazon when I left mine (we also have the same case). Anyhow, although I disagree with the installation, I agree with everything else. Installation for me was slightly confusing, but really easy once I understood what to do. Air bubbles were a pain to get out, but that's to be expected. As for the quality, it's perfectly fine except for your two points. Mostly your second point: the pixel cutoff. While definitely bearable and not very noticeable most of the time, in certain apps it really is irritatingly noticeable. I would have to recommend against getting this screen protector and waiting until a better one comes out. I'm keeping it on until I find a really good case and/or a better glass screen protector.
Has anyone tried the Nillkin "Amazing H tempered glass screen protector"? Would really like to know if it's any good because I enjoy their frosted case.
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
BTW, their case for this phone is really thick. Not as stylish as their early, asymmetrical cases :/
asmad said:
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
Click to expand...
Click to collapse
This is not great, but is the best I've found so far. It's not got perfect adhesion on the edges, but I've tried the super soft screen protector, flat glass and curved glass with glue only on the edges so dirt gets under it. I'd love to find a curved glass one that has glue all over it instead of just a tiny but around the edges.
I'm also looking for a curved screen protector that "glues" properly (direct contact) to the entire screen, not just the edges.
It doesn't have to be tempered glass either, simple cheap TPU would work fine.
The ebay one mentioned above doesn't ship outside of UK, so it's no good for me.
jayarmstrong said:
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
Click to expand...
Click to collapse
I have a problem with that screen protector, it turns proximity sensor always on, so you can't access the phone in call.
When I removed the devilcase curved glass screen protector, the proximity sensor starts to work again.
Seems that roxfit screen protector has similar issue.
https://talk.sonymobile.com/t5/Xper...-on-gt-black-screen-during-phone/td-p/1203936
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Gurule92 said:
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Click to expand...
Click to collapse
Product link
[Installation Tray] Galaxy Note 8 Screen Protector, OTAO 3D Tempered Glass Screen protector [case friendly] 9H Hardness Tough Sensitivity Samsung screen protector Note 8
https://www.amazon.com/dp/B075XKZX3Y/ref=cm_sw_r_cp_apa_nEZbAbFG3Z0DK
Sent from my SM-N950U1 using Tapatalk
badrsj said:
Product...
Click to expand...
Click to collapse
But you really don't need to quote the whole OP post again...
Sent from my Galaxy Note8 using XDA Labs
Hadn't realized that
Sent from my SM-N950U1 using Tapatalk
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I made the Whitestone Dome work with the UAG PLASMA AND PLYO. With a Dremel and sanding the corners. The PLASMA is my flavored case for looks and protection.
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I don't have any UAG cases but it can't be bigger in the front then rhinoshield can it? I would guess itd work but can't say for sure
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
If it's the corners you're worried about they come in pretty good. Check out the pic
So is it a full adhesive protector?
Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
I don't think it is. I see micro dots in one of the pictures.
Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
Nope sadly its not. But its still not bad for what it is
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
ultramag69 said:
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
Click to expand...
Click to collapse
That's unfortunate. 5 bucks isn't too bad. But 20. Nahh
says out of stock, how much was it?
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
pappschlumpf said:
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
Click to expand...
Click to collapse
Is this full adhesive, or just the edges?
deebo007 said:
Is this full adhesive, or just the edges?
Click to expand...
Click to collapse
Edge only. Forget about full adhesive, except whitestone. I've ordered two classic full adhesive @ AliExpress. A joke Bubbles, not adhering properly on the right and left side. And well the UAG wouldn't have fit with both too. Opened a dispute for both and got my money back.
Gesendet von meinem SM-N950F mit Tapatalk