Trigger Google Home response with Tasker Action after widget tap - Tasker Tips & Tricks

Hi all,
Just checking to see if something is possible.
I've created some custom widgets. When I tap on the widget, it performs a list of actions that I generated in Tasker. This works perfectly. What I would like, is audible confirmation from Google Home that the tasks were performed. For example, if I tap on the "Home" widget I would like the following to occur:
1. Alarm disarms
2. Living Room light turns on
3. Dining Room light turns on
4. Camera 1 stop recording
5. Camera 2 stop recording
6. Google Home says "Welcome Home Scott"
So far, actions 1 to 5 work fine...but is there a way to get action 6 to work?
Thanks,
Scott

Not sure if you are looking for this ??

TazDe said:
Not sure if you are looking for this ??
Click to expand...
Click to collapse
Please ignore , i missed the google home part ....

One to do it is to create a task with "Say to file," input your custom text and save as a mp3 file(add .mp3), then have AutoCast cast on Google Home.

Related

iPhone apps I WISH we had. Irealquicksms and SBsettings

I have both an iphone and a G1. Now people slate the iphone for not being open source, but in terms of productivity it seems the iphone still wins out for me, and it is almost entirely down to two apps which I feel the G1 could REALLY do with: sbsettings and irealquicksms. I am trying to use my g1 everyday as I'm considering selling my iphone and hope someone can point me in the direction of something similar, or the same. Best to look on YouTube for a full understanding of these apps, but in shorts....
Irealsms allows you to send an sms from within ANY application, simply by pressing the volume button followed by a tap on the volume icon that appears, or by doubletapping the homekey. This saves swapping between applications if a text needs to be sent, and also facillitates replying. This is invaluable if you are watching a movie clip and really speeds up the texting process...it is the one application I truly miss from the iphone more than any other.
SBsettings allows you to change almost ANY setting from within ANY application simply by swiping a finger across the status bar on iphone. This means, for example, that if one is watching a film, or browsing the web, one can change the brightness, turn on/off wifi, bluetooth, 3g, gps or any number of other functions by simply swiping the top of the screen, upon which a toggle board slides down the screen. A press of the menu key slides it back up again. I am amazed that this app hasn't been developed for android as it is much more efficient than silly toggle switch widgets which clutter the home screen and are far less practical if one is already inside an application
well Toggle Settings by cooolmagic places the application icon in the status bar for quick access, I find that a good replacement for SBsettings
Toggle Settings is definitely an awesome app and sounds like it would be a good replacement for that Iphone app.
I use ChompSMS and they are constantly improving their app. I'll get onto their website and request they add on a shortcut ability. Say double press on the camera button?
Or, another option is "Bar Control" to add a shortcut for ANYTHING to your notification bar.
Keyboard shortcuts are great, too.
I would suggest looking into sms popup. It makes the text msg pop up and you can just hit the reply button after you respond just hold down the home button and go back to the program you were using last.
Why not use the quick launch keyboard shortcuts for messaging (Search button + S) and Settings (no default)?
You can set shortcuts for up to 36 different apps and the shortcuts will work from any application. Just go to Settings > Application Settings > Quick Launch.
You could also just hold [HOME] and select Messaging/ChompSMS to send texts without having to drop back to the home screen (If it was one of your last 6 apps used anyways...)
Fandango would also be awesome.
mianosm said:
Fandango would also be awesome.
Click to expand...
Click to collapse
Random hijack much? Get your own thread.
Bar control allows you to put any app in the notification bar for easy access within most apps. So you could put your messaging app and a setting app (or any other app you may want) in the bar for easy access. The only exception would be apps that take up the full screen and hide the notification bar. Not many of those though.

Tasker on gTab

I just started using Tasker on my Droid X running Liberty GB and am loving it. Last night I installed tasker on my gtab running CalkClem V6 and was wondering if anyone has any gtab/tablet specific profiles or tips?
So far I have only used Tasker on the gtab to automatically turn off the screen when the case closes. The profile activates when the light sensor is at zero. The corresponding actions are wait 4 seconds and then lock device. I'm betting I will have trouble with this profile when using the gtab in a very dark room, so I might have to restrict this profile to only daylight hours.
I'm also considering using tasker to shut down the gtab automatically every night at around 2AM just in case I left it running and it's not plugged in.
Anyone doing anything interesting with tasker and the gtab?
brettdwagner said:
I just started using Tasker on my Droid X running Liberty GB and am loving it. Last night I installed tasker on my gtab running CalkClem V6 and was wondering if anyone has any gtab/tablet specific profiles or tips?
So far I have only used Tasker on the gtab to automatically turn off the screen when the case closes. The profile activates when the light sensor is at zero. The corresponding actions are wait 4 seconds and then lock device. I'm betting I will have trouble with this profile when using the gtab in a very dark room, so I might have to restrict this profile to only daylight hours.
I'm also considering using tasker to shut down the gtab automatically every night at around 2AM just in case I left it running and it's not plugged in.
Anyone doing anything interesting with tasker and the gtab?
Click to expand...
Click to collapse
That's actually REALLY useful! I'm going to go find it on the market in a little bit...
Tasker is $6.42 in the marketplace, which seems a bit expensive for an automation app... until you've tried it. The dev's site has a 7 day trial apk if you want to give it a spin. You can backup all profiles from the trial and restore them to the purchased app if you like it.
http://tasker.dinglisch.net/
I just created a profile on my droid x that plays beyondpod and sets the media volume to a specific level every time my Bluetooth headphones are connected.
sorry if I sound like a shill, but it's just so awesome...
Oh, its a paid app.
I like the idea, but not enough to spend that much on it. Maybe if it were a 99 cent app.
I'm almost certain there is a free app to do just the case close screen off portion. I remember seeing it here on the forum a while back.
That would be clutch, as I just got my case today and would love to make that happen!
To the op, could you post instruction on how to do what you did with locking screen when light sensor is zero? I'm struggling. With it.
Tasker isn't the most intuitive tool in the world, so here is how I achieved the case close, screen off profile:
Open tasker
tap "New" to create a new profile and name it anything
tap "State"
tap "Light Level"
set top slider at 0 and set bottom slider between 1 and 4 (higher number will help if your case doesn't block all the light)
tap "Done"
tap "New Task" and name it anything
tap "+"
tap "Tasker"
tap "Wait"
The second slider is seconds. This will determine how long the delay is between when you close your case and when the screen turns off. I selected 4 seconds to avoid accidentally covering the sensor with my finger.
scroll down and tap "done"
tap "+" again
tap "Display"
tap "System Lock"
tap "Done"
Tasker will need to gain a new permission from the OS at this point. Be sure to read the warnings that will pop up.
tap "Done"
tap "Apply" and make sure the "On" check box is selected in the bottom right
That should do it. If this doesn't work you may want to confirm that your light sensor is functioning properly (I've only tested this on CalkClem V6). To do that I downloaded one of the "phone sensor" apps from the marketplace.
Nvm, I'm an idiot.
goodintentions said:
Nvm, I'm an idiot.
Click to expand...
Click to collapse
I prefer "dummy" myself
brettdwagner said:
I prefer "dummy" myself
Click to expand...
Click to collapse
Haha, my original problem was I couldn't find "system lock". But in the back of my mind I was trying to look for "lock system". Only saw "lock" but no "lock system". I was like "wtf?"
Then after going on a rampage through my kitchen, I went back to the gtab and found "system lock".
May be I should get my eyes checked soon. Been a few years since last time.
By the way, thank you for recommending this app for me. I'm waiting for my clip case to arrive. Man, it will be slick. Has tested it a dozen times now. The screen shut off every time.
The thing is too bad the other way around doesn't work. I tried to set up the reverse to turn it on when there's light and the gtab wouldn't turn on.
Any idea how to restrict this to daytime hours? Nevermind. My dumbass found it.
You can restrict it to daylight hours by tapping the left side of the profile and selecting "add." From there you can set the hours in which this profile can be activated.
Just in case any onlookers were interested.
Check out gestures in tasker too. You can do things like mute the tab by rotating it left then right.
http://tasker.dinglisch.net/userguide/en/gestures.html

Lockscreen Doesn't Lock...

Hello all,
Was wondering if anyone is having the same issue as I am. My lock screen doesn't seem to actually lock the phone.. i.e. if you press an app without sliding it up, it just opens. The lock icon, however, is still displayed. My lock screen style is set to productivity, and that still all works, and I have no security set up. It's worth noting that it was working with no issues up until a day ago, and nothing has changed :/
For further clarification:
By not working, I mean that before I used to have to slide the tab up, or to launch an app I would have to drag it up, but now that doesn't work.
Here's a video showing what I mean:
http://www.youtube.com/watch?v=bclXBQwqXa0&feature=youtu.be
This just started happening to my AT&T HTC One tonight! I found this post by doing a search to see if anyone else had experienced this same issue on their One.
Also I can no longer drag the icons at the bottom of my lockscreen up to get into that particular app. And pressing anywhere on the lockscreen seems to unlock the phone and take me to the desktop.
I'm using the "music lockscreen" style, fyi.
LuigiC6 said:
Hello all,
Was wondering if anyone is having the same issue as I am. My lock screen doesn't seem to actually lock the phone.. i.e. if you press an app without sliding it up, it just opens. The lock icon, however, is still displayed. My lock screen style is set to productivity, and that still all works, and I have no security set up. It's worth noting that it was working with no issues up until a day ago, and nothing has changed :/
For further clarification:
By not working, I mean that before I used to have to slide the tab up, or to launch an app I would have to drag it up, but now that doesn't work.
Here's a video showing what I mean:
http://www.youtube.com/watch?v=bclXBQwqXa0&feature=youtu.be
Click to expand...
Click to collapse
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
I just figured out what was causing it on mine... I actually received my Pebble smartwatch in the mail today and had installed the Pebble Android app onto my One. This also required going into the Settings on my One and enabling Accessibility for the Pebble and Pebble Notifier and these 2 accessibility settings were what was causing the lockscreen to behave this way.
Don't see anyway to get around it so far...
ranphi said:
This just started happening to my AT&T HTC One tonight! I found this post by doing a search to see if anyone else had experienced this same issue on their One.
Also I can no longer drag the icons at the bottom of my lockscreen up to get into that particular app. And pressing anywhere on the lockscreen seems to unlock the phone and take me to the desktop.
I'm using the "music lockscreen" style, fyi.
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
I just figured out what was causing it on mine... I actually received my Pebble smartwatch in the mail today and had installed the Pebble Android app onto my One. This also required going into the Settings on my One and enabling Accessibility for the Pebble and Pebble Notifier and these 2 accessibility settings were what was causing the lockscreen to behave this way.
Don't see anyway to get around it so far...
Click to expand...
Click to collapse
Wow aha actually I did install the pebble app just before it started happening.. I wonder if it's a problem on pebble's side or htc... good catch though!
Yeah, not sure of that either. I just wondered and posted about this myself in another XDA thread I found on this very same topic:
http://forum.xda-developers.com/showthread.php?p=40598774#post40598774
LuigiC6 said:
Hello all,
Was wondering if anyone is having the same issue as I am. My lock screen doesn't seem to actually lock the phone.. i.e. if you press an app without sliding it up, it just opens. The lock icon, however, is still displayed. My lock screen style is set to productivity, and that still all works, and I have no security set up. It's worth noting that it was working with no issues up until a day ago, and nothing has changed :/
For further clarification:
By not working, I mean that before I used to have to slide the tab up, or to launch an app I would have to drag it up, but now that doesn't work.
Here's a video showing what I mean:
Click to expand...
Click to collapse
I have got this on my HTC one, I have come from an iphone and wanted to have the screen turn on when any emails are received. These show up on the lockscreen so when I'm driving if I get an email the screen turns on.
I can use several apps to do this but they all require to be enabled in Accessibility, if I do that the lockscreen unlocks when its touched anywhere as mentioned earlier without swiping. If I disable the accessibility setting its all back to normal but the app doesnt work....ie. the screen doesn't come on.
Any one figured this out yet?
M.
fibrousman said:
I have got this on my HTC one, I have come from an iphone and wanted to have the screen turn on when any emails are received. These show up on the lockscreen so when I'm driving if I get an email the screen turns on.
I can use several apps to do this but they all require to be enabled in Accessibility, if I do that the lockscreen unlocks when its touched anywhere as mentioned earlier without swiping. If I disable the accessibility setting its all back to normal but the app doesnt work....ie. the screen doesn't come on.
Any one figured this out yet?
M.
Click to expand...
Click to collapse
I found a work around for it. It requires root access, Tasker and Secure Settings.
What I did was create a Context that is activated when the display is on and then using Secure Settings, disable all Accessibility for all events. As an exit task, I re-enable all my accessibility apps.
Now when i turn on my display, I actually have to slide to unlock.
efox29 said:
I found a work around for it. It requires root access, Tasker and Secure Settings.
What I did was create a Context that is activated when the display is on and then using Secure Settings, disable all Accessibility for all events. As an exit task, I re-enable all my accessibility apps.
Now when i turn on my display, I actually have to slide to unlock.
Click to expand...
Click to collapse
Sound interesting, :good:
So I install Tasker and Secure Settings then create Context in Tasker? Hows that done? can you explain it a bit more....thanks
M.
Under the profiles tab
Press the + icon in the botton right corner
Select State
Select Display
Select Display State
Change "Is Off" to "Is On"
Press the back button
You should have a popup of available Tasks (if you have any)
Select New Task +
[Optional] Give it a name
You need to do the following section as many times as you have Acessibility services
***********************************************
Press the + icon in the lower middle screen
Select Plugin
Select Secure Settings
Press the Edit button
Select Accessibility Services
Select a service, and make sure is disabled (by default it will be)
Press the save icon in the lower left
Press back
************************************************************
Repeat the previous section as needed
When you are done creating your task, press the back button
You should be back at your main profile screen.
Long press the green arrow of the task you just created
Select Add Exit Task
Repeat the *********** section but save the accessiblity services as "Is Off" for all your services.
Tasker has a bit of a learning curve, and hopefully this will get you started.
efox29 said:
Under the profiles tab
Press the + icon in the botton right corner
Select State
Select Display
Select Display State
Change "Is Off" to "Is On"
Press the back button
You should have a popup of available Tasks (if you have any)
Select New Task +
[Optional] Give it a name
You need to do the following section as many times as you have Acessibility services
***********************************************
Press the + icon in the lower middle screen
Select Plugin
Select Secure Settings
Press the Edit button
Select Accessibility Services
Select a service, and make sure is disabled (by default it will be)
Press the save icon in the lower left
Press back
************************************************************
Repeat the previous section as needed
When you are done creating your task, press the back button
You should be back at your main profile screen.
Long press the green arrow of the task you just created
Select Add Exit Task
Repeat the *********** section but save the accessiblity services as "Is Off" for all your services.
Tasker has a bit of a learning curve, and hopefully this will get you started.
Click to expand...
Click to collapse
Thanks for the write up its really appreciated. I'll give it a go.....
M.
Efox29. That works very well.. Thanks again for the advice.
I've got this set up as well but for me it is extremely hit and miss. Nearly 50% of the time I still get the single touch unlock and the other half of the time tasker works perfectly. The only thing I can think of is that my pin unlock causes a problem but why only half the time.
Anyone else have this problem?
I suppose I should be happy my problem has been cut in half but I wish it was completely consistent.
Sent from my HTC One using xda-developers app
It's not ideal but works ok, for me it's better than nothing.
M.
Actually having used this tasker solution for a few days now it works about 75% of the time and seems more reliable if the screen has been off for a while vs reactivating the screen very soon after turning off. Still sometimes I get the one touch unlock after the screen being locked for hours. On the whole the accessibility problem still really annoys me but I agree this solution is better than nothing and so far I haven't had any more accidental call answers.
Sent from my HTC One using xda-developers app
has anyone noticed that another issue with this accessibility bug is that the screen will flicker or flash black for a split second after unlocking? again, this only happens after you turn on accessibility for an app.

disable the disable!

Is there a workaround yet to stop Android Auto from disabling the phone.? Once I'm connected to the car I can't see any email notifications (sound/vibrate/LED). It's really irritating and means I have to disconnect my phone every 15 minutes to check email!
Thanks.
Isn't the whole point of AA not to look at your phone every 15 mins while driving ?
Envoyé de mon SM-G800F en utilisant Tapatalk
Tell Apple that. Anyone actually have an answer? Thanks.
jamesbond_28_007 said:
Tell Apple that. Anyone actually have an answer? Thanks.
Click to expand...
Click to collapse
You can hit the multi task button and open a recent app. Keep your email client open in recents and check it at stoplights.
Sent from my Nexus 6P using Tapatalk
ireknole said:
You can hit the multi task button and open a recent app. Keep your email client open in recents and check it at stoplights.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
That's it! Brilliant thank you. So simple but hadn't tried that. I've now installed the caffeine app which also keeps the screen on permanently when connected to a USB. That way the email notification LED light now works when in Android Auto mode.
Thanks again
jamesbond_28_007 said:
That's it! Brilliant thank you. So simple but hadn't tried that. I've now installed the caffeine app which also keeps the screen on permanently when connected to a USB. That way the email notification LED light now works when in Android Auto mode.
Thanks again
Click to expand...
Click to collapse
You're welcome!
Sent from my Nexus 6P using Tapatalk
jamesbond_28_007 said:
Is there a workaround yet to stop Android Auto from disabling the phone.? Once I'm connected to the car I can't see any email notifications (sound/vibrate/LED). It's really irritating and means I have to disconnect my phone every 15 minutes to check email!
Thanks.
Click to expand...
Click to collapse
Or not. That's kind of the point of Android Auto in the first place is to get people off of messing with their phones while they're driving.
The only solution that I am aware I was to buy an Android Wear watch. All notifications still come through on the watch even when connected to Android Auto.
Press multi task button then press home, quickly select app or open app drawer.
I use this method with Note 4
Sent from my SM-N910V using Tapatalk
jamesbond_28_007 said:
That's it! Brilliant thank you. So simple but hadn't tried that. I've now installed the caffeine app which also keeps the screen on permanently when connected to a USB. That way the email notification LED light now works when in Android Auto mode.
Thanks again
Click to expand...
Click to collapse
After reading this I also installed Caffeine, it was the perfect app I was looking for to prevent my screen from turning off.
I enabled my email on Android auto unit, and I receive email notification on that..
Sent from my SM-G935F using Tapatalk
Hello and sorry for reviving such an old thread.
I have used for some time the trick suggested by @ireknole with a phone having hard buttons. My new phone, however, has soft buttons and Android Auto disables on purpose the multi-task button. (Mate 10 Pro, Android 8.0).
I have no other option left now to check my phone while AA is connected to the car and running. I need to check the phone for searching for a song or my wife needs to change the song while i'm driving - plus search the internet or whatever else she feels like on long roadtrips.
However, I can still access the notifications drawer and all the shortcut buttons found there (i did not give AA permission to draw over other applications).
Does anybody know:
1) How to place a custom button in the notifications drawer which specifically does that: activate multi-task function or any other function to just put AA in background and allow me to access other apps?
2) How to forbid AA to disable my multi-task button in the first place?
Thank you!
catalin.marin said:
Hello and sorry for reviving such an old thread.
I have used for some time the trick suggested by @ireknole with a phone having hard buttons. My new phone, however, has soft buttons and Android Auto disables on purpose the multi-task button. (Mate 10 Pro, Android 8.0).
I have no other option left now to check my phone while AA is connected to the car and running. I need to check the phone for searching for a song or my wife needs to change the song while i'm driving - plus search the internet or whatever else she feels like on long roadtrips.
However, I can still access the notifications drawer and all the shortcut buttons found there (i did not give AA permission to draw over other applications).
Does anybody know:
1) How to place a custom button in the notifications drawer which specifically does that: activate multi-task function or any other function to just put AA in background and allow me to access other apps?
2) How to forbid AA to disable my multi-task button in the first place?
Thank you!
Click to expand...
Click to collapse
I haven't found a way to get the multitask button to reshow, but I have a built in app on my Samsung S8 that allows me to swipe from the edge of the phone and select the "shortcut" "recent apps" that acts like the multitask button. There may be an app that's similar in the play store that lets you open it with a swipe and map a "recent apps" shortcut as an option.
Sent from my SM-G950U using Tapatalk
another way is to install AAWidget. it display a widget on your Android auto screen.
but this only work for AA2.9 since google disable third party apk in AA3.0
AA widget will list down mails, whatapps messages etc as long as theres widget for those apk.
make a clone and aawidget and you can havemultiple widget to read your email/whatsapp etc
but you cant read full email or messages if the email or messages too long. just good enough to check what are the incoming email/messages
Thank you for your answers!
I did not try your solutions because in the meanwhile I found a way to gain complete control over my phone using Tasker.
For anyone interested, create a new profile in Tasker, set the trigger to Apps->Android Auto and the task to "Go home".
What this setup achieves is showing the home screen whenever AA tries to pop up on screen, which solves all the problems
I can use my phone as if AA was not running at all, while AA is completely functional on the car's screen.
I use AA 2.9.57xxxx.
If you are on Nougat you can add a custom tile using the regular android api to launche the home launcher activity. But please don't post any source code or ready to use apk somewhere. This should be something for the "pros" if its too easy to use they come up with a way to block the notification drawer
ktwo said:
If you are on Nougat you can add a custom tile using the regular android api to launche the home launcher activity. But please don't post any source code or ready to use apk somewhere. This should be something for the "pros" if its too easy to use they come up with a way to block the notification drawer
Click to expand...
Click to collapse
Thank you! I will also try this approach when I'll have a few hours, as I have some Android development background
catalin.marin said:
Hello and sorry for reviving such an old thread.
I have used for some time the trick suggested by @ireknole with a phone having hard buttons. My new phone, however, has soft buttons and Android Auto disables on purpose the multi-task button. (Mate 10 Pro, Android 8.0).
I have no other option left now to check my phone while AA is connected to the car and running. I need to check the phone for searching for a song or my wife needs to change the song while i'm driving - plus search the internet or whatever else she feels like on long roadtrips.
However, I can still access the notifications drawer and all the shortcut buttons found there (i did not give AA permission to draw over other applications).
Does anybody know:
1) How to place a custom button in the notifications drawer which specifically does that: activate multi-task function or any other function to just put AA in background and allow me to access other apps?
2) How to forbid AA to disable my multi-task button in the first place?
Thank you!
Click to expand...
Click to collapse
I just started using AA on my Nexus 5X running 8.1. AA hides the multi-task button, but if you swipe up from the bottom of the screen; the buttons re-appear for a few seconds and you can select it again.
My problem is that AA sets the screen timeout to 15 sec. So when I pull over to check/write an email; the screen constantly shuts off. The Nexus 5X is no longer a "fast" phone, so starting OWA (outlook) takes more than 15 sec. I've gone into the phone settings after connecting the phone and changing it back to 2 min., but this setting will re-set the next time I plug the phone in again.
Latest version and the version before it (3.1 is latest, can't remember exactly what the previous version is) has changed this.. you can now just swipe up on the phone and access it normally when it's connected to Android auto.

Profile triggered by %time variable not firing

Phone is Pixel 3a running Android 10, Tasker is up-to-date.
I have a profile called PwrConnect that runs a task called Clock. The task simply launches my alarm clock app on the phone. The profile is primarily triggered when any power is connected to the phone but it has a secondary condition that specifies the time must be between 10:30pm and 6:00am.
When I plug my charger into the phone the profile is not triggered. If I remove the secondary condition (the time constraint) then the profile triggers when I plug in. But here's where it gets kind of strange. If I include the secondary condition (the time constraint) and I have the Tasker app open when I plug the charger in then the profile fires and runs the task which launches the clock app. Alternatively, I have also tried putting the time constraint in the task (%time > 2230) but that does not work either.
What am I doing wrong??? Or, is this a bug? Anyone else see anything like this?
Do you have "reliable alarms" enabled?
Have you tried a simple profile to just test the time context?
ktmom said:
Do you have "reliable alarms" enabled?
Have you tried a simple profile to just test the time context?
Click to expand...
Click to collapse
I'm not sure what "reliable alarms" is. Is that a setting in Tasker or Android?
Anyway, I have done some more testing. I added another step to the Clock task to simply flash a message when the task runs and I have found that the task (and therefore the profile) is indeed being executed as it should be - that is: when power is connected and the time is between 10:30pm and 6:00am. I can tell this because the message flashes on the screen when I connect power. BUT... the clock app only launches if I have the Tasker app open when I connect power. If the Tasker app is not open then I see the message flash but the clock app does not launch.
Reliable alarms is a tasker setting in preferences on the monitor tab. It helps tasker accurately execute time related activities.
What device and ROM are you on?
The following profile works fine for me with Tasker not in the foreground:
Code:
Time: From 11:44AM Till 3:44PM
State: Power [
Source:Any
]
Enter: Open App
A1: Launch App [
App:Clock
Data:
Exclude From Recent Apps: Off
Always Start New Copy: Off
]
ktmom said:
Reliable alarms is a tasker setting in preferences on the monitor tab. It helps tasker accurately execute time related activities.
What device and ROM are you on?
Click to expand...
Click to collapse
Device: Pixel 3a, ROM: stock Android 10 (not rooted)
I am fairly certain that the problem lies with the clock app that I am using. When I change the task so that it launches the stock, built-in clock app then everything works as it should. The clock app that I am trying to use (Kaloer Clock) is no longer in the PlayStore so has not been updated in a while. So, I suspect that there is something about it that Android 10 does not like. The app still functions fine and I can manually start it or Tasker will start it IF Tasker is running in the foreground. In fact this app has a setting that should start it automatically when power is plugged in but that stopped working about the time that I upgraded to Android 10, which is why I was trying to automate it with Tasker. I hate to give up on this app though because it is the only clock app I have found that allows me to tap anywhere on the screen to snooze the alarm (or long-press to cancel it). Everything else I have tried makes you tap an on-screen button which is difficult without my glasses.
Using AutoNotification (or any tasker notification listener plugin), a scene and intents, you can make the Google Clock have a full screen snooze/dismiss "button".
I slapped together an example that I put on Taskernet. It's full screen, a tap snoozes and long press dismisses.
To run it as is, you will need AutoNotification installed. The "ktm" after the profile/task/scene names can be removed. I do this to help prevent name collisions with anything already existing during import.
ktmom said:
Using AutoNotification (or any tasker notification listener plugin), a scene and intents, you can make the Google Clock have a full screen snooze/dismiss "button".
I slapped together an example that I put on Taskernet. It's full screen, a tap snoozes and long press dismisses.
To run it as is, you will need AutoNotification installed. The "ktm" after the profile/task/scene names can be removed. I do this to help prevent name collisions with anything already existing during import.
Click to expand...
Click to collapse
Ktmom,
I installed AutoNotification and imported your project. I am assuming that I need to delete either step 2 or 3 in the Stop Alarm ktm task. But, the scene does not appear unless I have Tasker running in the foreground when the alarm fires. Just wondered if you have test this in Android 10? Seems as though all my problems started after I upgraded.
dremelts said:
Ktmom,
I installed AutoNotification and imported your project. I am assuming that I need to delete either step 2 or 3 in the Stop Alarm ktm task. But, the scene does not appear unless I have Tasker running in the foreground when the alarm fires. Just wondered if you have test this in Android 10? Seems as though all my problems started after I upgraded.
Click to expand...
Click to collapse
The action that you're not using can be deleted or left paused.
And no, sorry, I'm always slow to update to major releases. But, there's something to try.
Edit the scene that your using, without changing anything else, tap the 3-dot menu. Select "properties" and change the "property type" to "activity". Save out of the scene.
Now edit the task -> show scene action that you are using and change "display as" to "activity".
Save out of the task, and Tasker, then test again.

Categories

Resources