Database Develop

[Q] GT-I8190L in BootLoop

I am very familiar with the hole ODIN&Root&Flash system with the Samsung Galaxy devices and my friends see me with my super Galaxy S3 overmodified and think is just plain easy so a friend of mine tried to root his Galaxy S3 Mini L version (Central and South American version) and after I don't know what he did his device just didn't woke up and is just trapped in the Galaxy Bootscreen, not even entering into the boot amination.
I kinda had a suspicion that he flashed a rooted ROM that was for the international Mini (the one without a L) IDK if it changes something or if the versions of this smartphone have something different in the insides, but I already tried flashing the WIPE_I8190.zip with ODIN and it failed to pass the bootscreen, I also flashed the Stock Firmware from SamMobile that is for the Mexican Version which is this smartphone (IUSACELL) and it passed successfully but it is stuck again
Do someone have any idea of how to save this poor smartphone?!

Try this, flash in PDA in Odin. Hope it helps you.
http://forum.xda-developers.com/attachment.php?attachmentid=1597045&d=1356657742
Sent from my GT-I8190 using xda premium

Thank you so much it actually worked!! but if you can tell me, what did the file make?!

Get rid of boot loop, save that file just in case you need again. So many people have this problem
Sent from my GT-I8190 using xda premium

I have the same problem
kicker63 said:
Get rid of boot loop, save that file just in case you need again. So many people have this problem
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
Hello dears! i have the same problem, my samsung GT-I8190L stays in the samsung logo (bootloop),
I tried flashing PARAM_8190.zip, wipe_8190 an original firmware and custom firmware.. and nothing.. is staying in bootloop. I was told to install from odin the bootloader, pda, phone, csc and PIT file. Then I have a problem, where to find these files for my Samsung Galaxy Mini GT-I8190L s3?. thank you very much! :fingers-crossed:

Flash the PARAM in PDA in Odin only. Don't mess with the PIT file.
Sent from my GT-I8190 using Tapatalk 2

I have the same problem (BOOTLOOP)
kicker63 said:
Flash the PARAM in PDA in Odin only. Don't mess with the PIT file.
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
Already did, friend and not result, so I need the bootloader file and in any case the pit file, because with those files I was told that could revive my terminal. Thanks again!: D

abelrolon77 said:
Already did, friend and not result, so I need the bootloader file and in any case the pit file, because with those files I was told that could revive my terminal. Thanks again!: D
Click to expand...
Click to collapse
You can find the pit file in the unbrick thread, you really dont need an pit file if odin doesn't give you pit errors
Can you boot into recovery? vol-up+home+power?

Same Problem (bootloop)
AssToast said:
You can find the pit file in the unbrick thread, you really dont need an pit file if odin doesn't give you pit errors
Can you boot into recovery? vol-up+home+power?
Click to expand...
Click to collapse
oh! negative I can not access the recovery mode, but yes in download mode!. I tried flashing custom rom and original rom. and accomplished nothing

abelrolon77 said:
oh! negative I can not access the recovery mode, but yes in download mode!. I tried flashing custom rom and original rom. and accomplished nothing
Click to expand...
Click to collapse
just download your stock firmware from here http://www.sammobile.com/firmwares/1/?model=GT-I8190L&pcode=0#firmware
put it in pda. no need for pit file. make sure re-partition is unchecked.
if you stuck in bootloop after finishing, flash param as pda.

Samsung Galaxy s3mini (bootloop)
samersh72 said:
just download your stock firmware from here (URL)
put it in pda. no need for pit file. make sure re-partition is unchecked.
if you stuck in bootloop after finishing, flash param as pda.
Click to expand...
Click to collapse
Dear, i tried as you said and can not get anything! continue rebooting my GT-i8190L
postdata: i can´t acces to recovery mode, but i can acces to download mode! Thanks friends.

abelrolon77 said:
Dear, i tried as you said and can not get anything! continue rebooting my GT-i8190L
postdata: i can´t acces to recovery mode, but i can acces to download mode! Thanks friends.
Click to expand...
Click to collapse
[HOW-TO] Enable Three Button Combo [RECOVERY]
If it doesn't work, flash a separate recovery. [RECOVERY] CWM/TWRP/STOCK [DB][ALL i8190 Models]

Samsung galaxy s mini in (BOOTLOOP) death phone??
tys0n said:
[Enable Three Button Combo [RECOVERY]
If it doesn't work, flash a separate recovery. [ [RECOVERY] CWM/TWRP/STOCK [DB][
Click to expand...
Click to collapse
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks

abelrolon77 said:
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks
Click to expand...
Click to collapse
You still can't enter recovery?

GT-i8190L
tys0n said:
You still can't enter recovery?
Click to expand...
Click to collapse
negative dear, i can't. because the file PiT show error in my phone ( custom pit error ) and the recuperation button file.

abelrolon77 said:
negative dear, i can't. because the file PiT show error in my phone ( custom pit error ) and the recuperation button file.
Click to expand...
Click to collapse
Use this Pit file and tick repartition in odin while flashing, did you already have this problem when you were flashing stock rom? try flashing the pit with stock rom

Samsung GT-I8190L (bootloop) HELP PLEASE!!!
AssToast said:
Use this and tick repartition in odin while...ted firmware, i can't acces to recovery mode!
Click to expand...
Click to collapse

abelrolon77 said:
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks
Click to expand...
Click to collapse
Did it say PASS, or did you get errors?

Samsung GT-I8190L (bootloop) HELP PLEASE!!!
tys0n said:
Did it say PASS, or did you get errors?
Click to expand...
Click to collapse
Hello friend!, I have "errors" in odin, in the method "Enable Three Button Combo" and "CWM / TWRP / STOCK [DB] [ALL i8190 Models". What I can do?. You know some page to download the official PIT, bootloader, phone an CSC file?

abelrolon77 said:
Hello friend!, I have "errors" in odin, in the method "Enable Three Button Combo" and "CWM / TWRP / STOCK [DB] [ALL i8190 Models". What I can do?. You know some page to download the official PIT, bootloader, phone an CSC file?
Click to expand...
Click to collapse
I have some service firmware for i8190 and i8190N, but not for L. I'll see if I can find any..

[Q] I9070 stuck during installing Touch TWRP Recovery

I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?

pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
Just download the factory image .md5 on sammobile.com and flash it via odin
Sent from my GT-I9070 using XDA Free mobile app

pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.

shut_down said:
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
Click to expand...
Click to collapse
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505

AntaresOne said:
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I used to do that, I was just removing other stuff. And it was working just fine. BTW, I leave file without *.md5.

solution
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also

silllentkiller said:
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
Click to expand...
Click to collapse
1. What problem?
2. He flashed GB kernel over JB - that is his problem.
3. How to downgrade - http://forum.xda-developers.com/showthread.php?t=2195673
4. Solution to have TWRP on JB is to install CoCore kernel with TWRP recovery, just go to developer section of our phone and look for CoCore thread.

Urgent Help .... GT-N7000 fail on nand write in Odin

Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?

matrixlover said:
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
Click to expand...
Click to collapse
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.

albatron34 said:
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
Click to expand...
Click to collapse
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive

matrixlover said:
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
Click to expand...
Click to collapse
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85

albatron34 said:
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
Click to expand...
Click to collapse
should be Odin3_v1.85 or may bey higher v3.09 ?

matrixlover said:
should be Odin3_v1.85 or may bey higher v3.09 ?
Click to expand...
Click to collapse
for me i bricked my phone after wrong flash; i used odin 1.85 and pit file 16GB and officiel stock jbrom and my phone now is ok.
good step by step guide :
http://www.androidayos.com/2012/09/...galaxy-note-n7000-unbrick-and-recovery-guide/

I'm tried using odin 1.85 but it stuck when i tried to use pit file & now i tried to ener download mode it shows me use volume up but when i click the screen goes black may be the battery even i charged it externally i'll try to get another battery but now i stuck what shall i do ?

why no replay anyone help me

matrixlover said:
why no replay anyone help me
Click to expand...
Click to collapse
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"

Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk

ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
So there any idea to put the right one using anything or what ?!

matrixlover said:
So there any idea to put the right one using anything or what ?!
Click to expand...
Click to collapse
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk

ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
AndroidSlave said:
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
AndroidSlave said:
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
I'm sorry if i get u tar is flashed & repartitioned but u mean with Philz the tar file ? & philztouch file what do u mean exactly ?

[KERNEL] Permissive Lollipop 5.1.1 kernel for T710/T810

This is a permissive kernel with rooting restrictions removed.
Due to the new security policies in 5.1.1 you will need this kernel to root your device.
This will trip the knox flag thereby potentially voiding your warranty.
I hold no responsibility in any case if you decide to flash this product.
NOTE: PLEASE DONT DIRECT LINK TO THESE FILES, PLEASE LINK TO THIS POST.
IF YOU WISH TO USE MY WORK IN YOUR PROJECT ALL I ASK IS FOR PROPER CREDIT.
t710_5.1.1_boot
t810_5.1.1_boot
Source code
PLEASE LEAVE FEEDBACK AND HIT THAT THANKS BUTTON.
CREDITS: Samsung for the source code, Suzook and anyone that helped test.

Hi ashyx......Any chance to get one for sm-t815 too?
Gesendet von meinem SM-T815 mit Tapatalk

atonal said:
Hi ashyx......Any chance to get one for sm-t815 too?
Gesendet von meinem SM-T815 mit Tapatalk
Click to expand...
Click to collapse
Officially its not available yet, but im trying to modify the t810 kernel for the t815 for when they release the 5.1.1 rom

I had a bit of a challenge to get this installed on my SM-T710. I couldn't get Odin to install the kernel using either boot or AP. I did get this working by installing your TWRP build, extracting the IMG file and having TWRP install the IMG file.

rp3 said:
I had a bit of a challenge to get this installed on my SM-T710. I couldn't get Odin to install the kernel using either boot or AP. I did get this working by installing your TWRP build, extracting the IMG file and having TWRP install the IMG file.
Click to expand...
Click to collapse
What was the issue?

Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Sent from my SM-T710 using Tapatalk

rp3 said:
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Click to expand...
Click to collapse
Same issue for me. Couldn't get it to flash with Odin so flashed the image file via twrp and all is good.

rp3 said:
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
jimm2 said:
Same issue for me. Couldn't get it to flash with Odin so flashed the image file via twrp and all is good.
Click to expand...
Click to collapse
Try ODIN 3.10.7
https://www.androidfilehost.com/?fid=24052804347818437

BigBot96 said:
Try ODIN 3.10.7
https://www.androidfilehost.com/?fid=24052804347818437
Click to expand...
Click to collapse
Tried 3.10.7 and several older versions with no luck. Was able to root by flashing the image file in twrp and then flashing the autoroot tar file in Odin so I'm good to go.

The tar package must have got corrupted in the upload or something.
Will re-upload.

ashyx said:
The tar package must have got corrupted in the upload or something.
Will re-upload.
Click to expand...
Click to collapse
Flashed the Tar and it didnt go thru, I got stuck as well..
if you have time can you re-upload the TAR...
i got stuck in the middle of something...
Thank you!!!

rp3 said:
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
Hmm, I had the same problem but I can't use twrp because when I flash that it says it flashed fine but then I still get the regular stock recovery. Im on 5.1.1

thedanks said:
Hmm, I had the same problem but I can't use twrp because when I flash that it says it flashed fine but then I still get the regular stock recovery. Im on 5.1.1
Click to expand...
Click to collapse
if you already on 5.1.1 ...I believed you have to root first before you can install the TWRP...
I was not sure how did they flashed TWRP without got the Tab rooted first...
more specific instruction ... would be nice...
Thanks

rp3 said:
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
lonelime said:
if you already on 5.1.1 ...I believed you have to root first before you can install the TWRP...
I was not sure how did they flashed TWRP without got the Tab rooted first...
more specific instruction ... would be nice...
Thanks
Click to expand...
Click to collapse
from what i understood they were flashing twrp in odin... from the instructions I read it appeared you could update to 5.1.1 and then begin the process...
Do I need to flash back to 5.0.2 and if so which one? I've got a US 710 wifi.

thedanks said:
from what i understood they were flashing twrp in odin... from the instructions I read it appeared you could update to 5.1.1 and then begin the process...
Do I need to flash back to 5.0.2 and if so which one? I've got a US 710 wifi.
Click to expand...
Click to collapse
I just got the root working...
no need to go back for 5.0.2
from 5.1.1 stock..
1-flash TWRP
2-copy t710_5.1.1_boot.img (pulled out from the corrupted TAR) place it in your Tab
3-go to TWRP
4-select install from Image
5-flash t710_5.1.1_boot.img
6-go back download mode, and flash the CF_auto root
7-go back download mode again, and flash the TWRP again
8-go back and verified got Rooted and Custom TWRP
Thanks

lonelime said:
Flashed the Tar and it didnt go thru, I got stuck as well..
if you have time can you re-upload the TAR...
i got stuck in the middle of something...
Thank you!!!
Click to expand...
Click to collapse
FIXED!

thedanks said:
Hmm, I had the same problem but I can't use twrp because when I flash that it says it flashed fine but then I still get the regular stock recovery. Im on 5.1.1
Click to expand...
Click to collapse
The stock recovery gets reflashed by the OS when you reboot. To prevent this from happening you have to reboot immediately into recovery after flashing. TWRP will then patch it to prevent this from happening.
If you disable 'Auto reboot' you can reboot after flashing by holding POWER + HOME + VOL DOWN then immediately switch to VOL UP whilst still holding the other buttons when the tablet restarts.

ashyx said:
The stock recovery gets reflashed by the OS when you reboot. To prevent this from happening you have to reboot immediately into recovery after flashing. TWRP will then patch it to prevent this from happening.
If you disable 'Auto reboot' you can reboot after flashing by holding POWER + HOME + VOL DOWN then immediately switch to VOL UP whilst still holding the other buttons when the tablet restarts.
Click to expand...
Click to collapse
that did it thanks!

The combination T810XXU1BOH7_T810XAR1BOH7_XAR & t810_5.1.1_boot & t810_cf-autoroot_5.1.1 works on my TM810!

ashyx said:
The tar package must have got corrupted in the upload or something.
Will re-upload.
Click to expand...
Click to collapse
I think AFH was having issues last night, I had a lot of my own uploads fail to flash after redownloading.

help boot loop

heya.
after trying to flash stock firmware to updare my baseband it started to loop and cannot start.
tried flashing twrp but it does not boot to recovery.
also very important there is a chance while i flashed my stock firmware the "re-partition" box was checked.
what to do???

Ph0n1x said:
heya.
after trying to flash stock firmware to updare my baseband it started to loop and cannot start.
tried flashing twrp but it does not boot to recovery.
also very important there is a chance while i flashed my stock firmware the "re-partition" box was checked.
what to do???
Click to expand...
Click to collapse
Normally repartition is not checked by default in odin. Further which version are you trying to flashing? Which one you have? Give some more details to seek help from xda family.
Sent from my SM-N950F using Tapatalk

MirzaAwais said:
Normally repartition is not checked by default in odin. Further which version are you trying to flashing? Which one you have? Give some more details to seek help from xda family.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
had this: N920cxxu3cql1
tried to instal this N920CXXU4CRB4_N920COJV4CRB3

maybe if i try to replace the twrp recovery in the stock firmware? might that work?
(since i dont intend to use the actual stock rom. i want to flash linaege os)

Ph0n1x said:
had this: N920cxxu3cql1
tried to instal this N920CXXU4CRB4_N920COJV4CRB3
Click to expand...
Click to collapse
Download latest firmware thru samfirm with check marks on binary or something like that which will reset your phone on favtory condition and rebuild all partitions. Be aware with this method your phone will be restored just like new one and data and other will be gone.
Sent from my ONEPLUS A3003 using Tapatalk