Hi everyone,
While trying to install LineageOS (following the guide here) my phone is now stuck on "Your device is booting".
Note that I had my phone rooted before so OEM unlock and TWRP were already done/installed.
Unfortunately my backup seems to not have worked and I believe I might have erased more than I should, including system and vendor. So now I'm stuck with installing any OS to be honest.
My phone is an ARM64, prague, WAS-LX1A.
Can anyone help me please?
Thanks!
I was able to use the dload method to get back to stock rom.
Related
Hi All,
I'm a android developer so need a get root shell.
So, I saw several posts, unlocked the boot loader, and installed twrp.
But when i enter recovery mode, i get only this message "Your device is booting now ...". So, i tried to install twrp with old versions.
and it also failed.
I realized that something went wrong, I tried to restore the recovery mode to stock firmware, but it failed too.
this is my P9 infomation.
Firmware Version: EVA-L09C627B150
Andorid Version: 6.0
EMUI: 4.1
What should I do to twrp boot successfully? I need help.
I have bricked my p8 lite 2017 PRA-LX1 after i try to close the bootloader the cell phone has started the erecovery, but every update attempt falls immediately afterwards, can you help me? is all the time I try to install the twrp with adb but nothing happens :crying::crying:
Update: finally i put the twrp recovery and apparently it is the file system to give these problems, I tried to repair and format it in .fat and .exfat but there is no way to make it work, any ideas?
Hello guys, I tried to install some rom with a TWRP oreo but every time it seems to install the rom goes into the bootloop and erecovery, nobody knows how to install a rom or a firmware from twrp or adb? I can't install anything besides recovery help please
Ok, so I had installed Magisk, it was fine, but i tried to flash the update (not related i dont think, just my magisk was outdated) After TWRP flashed successfully, my phone was soft-bricked. it restarted 3 times and then (as i have Huawei p8 lite 2017) eRecovery said something was wrong with the latest boot. I installed and updated eRecovery, and it (obviously) deleted TWRP, along with the root. This was attempt No. 1. I then flashed TWRP again, successfully, and went to reinstall the same downloaded magisk, and the flashing was successful, and i rebooted only for a soft-brick to occur again. I am currently installing the eRecovery to remove TWRP again, however this is annoying . as it was working PERFECTLY then i tried to reflash then everything failed. Please help me as i dont know what to do now. I cant show specs its running EMUI 8.0, ANDROID OREO, Its a Huawei p8 lite 2017 (Same specs as Honour 9 lite and like 3 other phones, unsure of the model)
***MY BOOTLOADER IS UNLOCKED IF IT WASNT CLEAR!***
Edit : Version : PRA-LX1 8.0.0.362(C442)
Obviously i cant ask Huawei support as i have voided my warrantee.
I await your instructions
Hello,
I am new to the world of custom ROMs, I have a huawei mediapad T5. I followed the guide and successfully rooted my device. then I installed TWRP from this link:
https://forum.xda-developers.com/showpost.php?do=showpost&p=76362629
I struggled to flash lineageos 16 on my device, after couple of hours, I found the installation guide from openkirin, that mentioned they don't support TWRP. but as I had already flashed my device with TWRP, I had no backup for stock recovery image. I tried to flash it anyway as mentioned in the openkirin site.
but now it stuck at TWRP screen. I am not sure how can I remove twrp completely from my mediapad t5.
After messing around I managed to boot into eRecovery from huawei, where I got option to download the stock firmware. that saved my day.
But I really want to flash it with LineageOS 16. I am not sure what can be done about twrp. Is there any way to remove it from my Mediapad, or is there any guide to install Open Kirin's LineageOS image onto my device along with TWRP?
Please let me know.
#Update
I managed to install Lineage OS onto my Mediapad T5. But I am afraid, I didn't like it much. It is not optimized for the tablet. There're unnecessary apps like Phone App, Messaging App etc. I only got Wifi version. Plus it has issues with Audio Output.
I am reverting back to stock ROM for now, Until better ROM is available from OpenKirin.
gunpal5 said:
Hello,
I am new to the world of custom ROMs, I have a huawei mediapad T5. I followed the guide and successfully rooted my device. then I installed TWRP from this link:
https://forum.xda-developers.com/showpost.php?do=showpost&p=76362629
I struggled to flash lineageos 16 on my device, after couple of hours, I found the installation guide from openkirin, that mentioned they don't support TWRP. but as I had already flashed my device with TWRP, I had no backup for stock recovery image. I tried to flash it anyway as mentioned in the openkirin site.
but now it stuck at TWRP screen. I am not sure how can I remove twrp completely from my mediapad t5.
After messing around I managed to boot into eRecovery from huawei, where I got option to download the stock firmware. that saved my day.
But I really want to flash it with LineageOS 16. I am not sure what can be done about twrp. Is there any way to remove it from my Mediapad, or is there any guide to install Open Kirin's LineageOS image onto my device along with TWRP?
Please let me know.
#Update
I managed to install Lineage OS onto my Mediapad T5. But I am afraid, I didn't like it much. It is not optimized for the tablet. There're unnecessary apps like Phone App, Messaging App etc. I only got Wifi version. Plus it has issues with Audio Output.
I am reverting back to stock ROM for now, Until better ROM is available from OpenKirin.
Click to expand...
Click to collapse
Try LOS18.1 (very VERY smooth) --> https://forum.xda-developers.com/t/...ation-guide-for-mediapad-t5-ags2-xxx.4291431/
Fosanz said:
Try LOS18.1 (very VERY smooth) --> https://forum.xda-developers.com/t/...ation-guide-for-mediapad-t5-ags2-xxx.4291431/
Click to expand...
Click to collapse
How safe is this unofficial LOS18.1 ROM?
gunpal5 said:
How safe is this unofficial LOS18.1 ROM?
Click to expand...
Click to collapse
I use it everyday so. Very safe I'm gonna say
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
ajadamjones87 said:
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
Click to expand...
Click to collapse
your devices is encrypted try flash other custom rom first then try revert to stock hope it help u out
Thanks very much for your response. Based on your advice i tried to flash the latest Kraken 11 Vanilla rom from this fourm, however after installing via TWRP now i can't even get into recovery anymore, just goes straight to fastboot.
Any other suggestions please?
I have now managed to get back in to TWRP and tried flashing lineage latest rom but still i am stuck in a boot loop taking me to fastboot this time.
Please can someone help suggest hwo i can get my phone working agian. At this point i dont care which rom i end up (custom or stock) with as long as i can get it to function again
If your device is rooted, you can NOT update the system using the OTA (over-the-air), or the device will be stucked in bootloop.
If your device is rooted, you need to update the system MANUALLY, using the fastboot or spflashtool.
I suggest to update the system using the fastboot.
Now, you need to flash the whole MIUI again, except userdata and you will have your device back.
For anyone with a asimilar problem i eventually managed to fix my issue by using miflash tool version 20180528 and flashing merlin_eea_global_images_V12.0.10.0.QJOEUXM_20210413.0000.00_10.0_eea_c4a9d5d7fc fastboot version which i downloaded from the xiami site.
I had to try this multiple times because the extraction of the file did not seem to be correct on the first attempts.