Lost root after Oxygen 4.5.15 Update ;-( plz help! - OnePlus 5 Guides, News, & Discussion

A bit bummed out after loosing root after updated to the latest version of Oxygen OS
How can I solve this, is it necessary to re-flash anything ?
Thanks in advance !

Charlied43 said:
A bit bummed out after loosing root after updated to the latest version of Oxygen OS
How can I solve this, is it necessary to re-flash anything ?
Thanks in advance !
Click to expand...
Click to collapse
It's expected to happen that way. Just re-flash root in TWRP. If you updated to Oreo, forget supersu, not working anymmore, use magisk. 14.6.

sansanc said:
It's expected to happen that way. Just re-flash root in TWRP. If you updated to Oreo, forget supersu, not working anymmore, use magisk. 14.6.
Click to expand...
Click to collapse
Thanks ok, so I reboot back into TWRP and flash Magisk ?
Please be specific my rooting' skills are way out of practice ..

sansanc said:
It's expected to happen that way. Just re-flash root in TWRP. If you updated to Oreo, forget supersu, not working anymmore, use magisk. 14.6.
Click to expand...
Click to collapse
I think I've lost TWRP recovery! Is this possible ? Seems like I can only boot into stock recovery ; (

Charlied43 said:
I think I've lost TWRP recovery! Is this possible ? Seems like I can only boot into stock recovery ; (
Click to expand...
Click to collapse
You need to install twrp again as well

Root and twrp
Charlied43 said:
A bit bummed out after loosing root after updated to the latest version of Oxygen OS
How can I solve this, is it necessary to re-flash anything ?
Thanks in advance !
Click to expand...
Click to collapse
Follow this link and you will solve your issue:
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877

aakashverma0007 said:
You need to install twrp again as well
Click to expand...
Click to collapse
Thanks dude, all good I have restored TWRP and #root however Magisk is now telling me that I fail the safety net check ; ( what now ?

Charlied43 said:
Thanks dude, all good I have restored TWRP and #root however Magisk is now telling me that I fail the safety net check ; ( what now ?
Click to expand...
Click to collapse
what version of magisk did you flash? also did you only flash magisk or something else too?

B0unze said:
what version of magisk did you flash? also did you only flash magisk or something else too?
Click to expand...
Click to collapse
I now am updated to 15.2 and yes, only Magisk so far..
Cheers!

Flash blu spark TWRP via fastboot. Search the forum. Then install magisk 14.6. you should be good that way.

Related

What is the correct way to re-enable encryption?

If I have formatted and installed with encryption disabled, what is the right way to get encryption back?
Can I just go into Settings>Security & Fingerprint>Encrypt Phone and enable it there?
Yup, that should do the trick. Didn't try on T3, but used same method on one of my prev phones.
Did that work?
I did it on OOS 4.1.1 with twrp and franco kernel installed. It worked for me :good:
AndreiVolk said:
I did it on OOS 4.1.1 with twrp and franco kernel installed. It worked for me :good:
Click to expand...
Click to collapse
I wonder if it works with a non oos rom though
stonew5082 said:
I wonder if it works with a non oos rom though
Click to expand...
Click to collapse
Well all custom roms work fine with encrypted devices so i don't see why it shouldn't be possible to encrypt your device on a custom rom. If you want to be 100% sure ask in the thread of your rom
AndreiVolk said:
Well all custom roms work fine with encrypted devices so i don't see why it shouldn't be possible to encrypt your device on a custom rom. If you want to be 100% sure ask in the thread of your rom
Click to expand...
Click to collapse
It worked. I disabled root to be on the safe side and encrypted. I get errors in twrp now, but they don't seem to effect anything.
stonew5082 said:
It worked. I disabled root to be on the safe side and encrypted. I get errors in twrp now, but they don't seem to effect anything.
Click to expand...
Click to collapse
May i know what error TWRP gives after you encrypt your phone ?
I plan to do so as well...
stonew5082 said:
It worked. I disabled root to be on the safe side and encrypted. I get errors in twrp now, but they don't seem to effect anything.
Click to expand...
Click to collapse
nicknacknuke said:
May i know what error TWRP gives after you encrypt your phone ?
I plan to do so as well...
Click to expand...
Click to collapse
Root is not a problem neither. i did it with root enabled.
That twrp error is normal. When you boot in twrp it shows the error that it can't mount data because you're encrypted and you need to type in your password first.
I also suggest you to use blu_spark's twrp because it's always updated. The official twrp for the op3t hasn't a maintainer anymore and it seems abbandoned..
AndreiVolk said:
The official twrp for the op3t hasn't a maintainer anymore and it seems abbandoned..
Click to expand...
Click to collapse
How do you figure that?
https://eu.dl.twrp.me/oneplus3t/
Didgeridoohan said:
How do you figure that?
https://eu.dl.twrp.me/oneplus3t/
Click to expand...
Click to collapse
I mean here on xda. The last build on xda is the 3.0.4.1 which it never came out. There was the 3.1.0.0 which had the wipe bug for the 3t. I don't know who is making those builds and i don't neither know if they test it.
AndreiVolk said:
I mean here on xda. The last build on xda is the 3.0.4.1 which it never came out. There was the 3.1.0.0 which had the wipe bug for the 3t. I don't know who is making those builds and i don't neither know if they test it.
Click to expand...
Click to collapse
You were talking about the official builds... That's the official downloads from the official TWRP website (https://twrp.me). There's a world outside XDA as well...

Magisk and root

can i flash magisk using twrp and get root?
It worked for me using twrp from https://forum.xda-developers.com/p10/development/recovery-twrp-3-2-1-0-emui-8-0-4-04-2018-t3773449 and magisk 16.0 on oreo firmware.
Quick answer...yes.
On Oreo (VTR-L09C432B360), I installed the 15.4 version from here... https://forum.xda-developers.com/p10-plus/development/magisk-p10-p10plus-t3752482 (it's for the P10 Plus but works on P10's as well)
You can then update to the latest version (v16) via the Magisk Manager app.
Nougat here... https://forum.xda-developers.com/p10/how-to/guide-huawei-p10-root-magisk-magisk-t3625151
colthekid said:
Quick answer...yes.
On Oreo (VTR-L09C432B360), I installed the 15.4 version from here... https://forum.xda-developers.com/p10-plus/development/magisk-p10-p10plus-t3752482 (it's for the P10 Plus but works on P10's as well)
You can then update to the latest version (v16) via the Magisk Manager app.
Nougat here... https://forum.xda-developers.com/p10/how-to/guide-huawei-p10-root-magisk-magisk-t3625151
Click to expand...
Click to collapse
It's doable on any p10's right like I have the dual sim version.
One more question....to get the treble ROM I have to root right?
Those have flashed successfully, did your SafetyNet pass completely? ctsProfile is the only issue I'm having right now
naeemomr said:
It's doable on any p10's right like I have the dual sim version.
One more question....to get the treble ROM I have to root right?
Click to expand...
Click to collapse
Works on all P10's as far as I'm aware. Don't know about Treble, I'm on stock.
MrDanMak said:
Those have flashed successfully, did your SafetyNet pass completely? ctsProfile is the only issue I'm having right now
Click to expand...
Click to collapse
Yes SafetyNet passes fine
colthekid said:
Works on all P10's as far as I'm aware. Don't know about Treble, I'm on stock.
Yes SafetyNet passes fine
Click to expand...
Click to collapse
Damn, didn't work for me. Just the ctsProfile: False issue I'm having. On the B360 firmware using the latest TWRP that works for the P10 as well. Know of anything else I can do to fix this perhaps?
Try Magisk in core only mode and turn on Magisk Hide, other than that I don't know I'm afraid.
-i instaled magisk manager (16)
-patched the original boot parition (you have to untrigger both options in magisk manager..."keep force encryption" "keep AVB 2.0/dm-verity)
-flashed modified boot parition with TWRP
-all OK, safetynet OK
DallasCZ said:
-i instaled magisk manager (16)
-patched the original boot parition (you have to untrigger both options in magisk manager..."keep force encryption" "keep AVB 2.0/dm-verity)
-flashed modified boot parition with TWRP
-all OK, safetynet OK
Click to expand...
Click to collapse
Hi DallasCZ,
May I ask you to be more specific?
I just ordered a P10 and I would like root it with Magisk (I alrady have a Lenovo Tab3 8Plus (TB-8703F) and successfully routed with Magisk (Safety Net check is green))
So, what are the steps? Can I use the original Magisk, or should I use a P10 specific? And how the OTA updates work with the Magisk? Eg.: Do you have to disable it before update? I hope not, since Magisk is systemless and the Oreo ROM is Treble "compatible". Oh, and could you give me a link to a working TWRP, which is compatible with the latest Oreo?
Thanks everything in advance!
So, is it not possible to flash ramdisk without unlocking bootloader?
cesedy said:
So, is it not possible to flash ramdisk without unlocking bootloader?
Click to expand...
Click to collapse
Yes you jave to unlock bootloader first.
Finally I got my phone. Now I'm testing, and getting familiar with it. But after that, I really need some help / advice ...
So my questions are the follows:
If I open the bootloader (no root, no other modifications), will I get OTA updates, and will they work?
Which TWRP is recommended? twrp 3.2.1-0 OREO or TWRP 3.2.1-0 for EMUI 8.0 or another one? What is the difference between the first two?
Can I use the official Magisc? I'm on VTR-L29 8.0.0.360(C432)
And the "really big" question: Is it possible to have OTA updates and Magisk at the same time? If yes, how?
Dexterova said:
Finally I got my phone. Now I'm testing, and getting familiar with it. But after that, I really need some help / advice ...
So my questions are the follows:
If I open the bootloader (no root, no other modifications), will I get OTA updates, and will they work?
Which TWRP is recommended? twrp 3.2.1-0 OREO or TWRP 3.2.1-0 for EMUI 8.0 or another one? What is the difference between the first two?
Can I use the official Magisc? I'm on VTR-L29 8.0.0.360(C432)
And the "really big" question: Is it possible to have OTA updates and Magisk at the same time? If yes, how?
Click to expand...
Click to collapse
Guys, don't bother with answering my question. It seems that Huawei removed the possibility to get unlock code. So, right now it seems I'll never be able to root my device
Dexterova said:
Guys, don't bother with answering my question. It seems that Huawei removed the possibility to get unlock code. So, right now it seems I'll never be able to root my device
Click to expand...
Click to collapse
Apparently you can contact customer service and receive the unlock code after a couple of days.
M1chiel said:
Apparently you can contact customer service and receive the unlock code after a couple of days.
Click to expand...
Click to collapse
Are you sure? How? Just write an e-mail to [email protected]? But why they shut down the request page / site? This does not make any sense.
Dexterova said:
Are you sure? How? Just write an e-mail to [email protected]? But why they shut down the request page / site? This does not make any sense.
Click to expand...
Click to collapse
Huawei Reddit
M1chiel said:
Huawei Reddit
Click to expand...
Click to collapse
OK, I'll give it a try...
... (other) question(s):
If I open (no root) the bootloader, will I get OTA updates?
In other words: you guys, with Magisk, how do you update your devices?
Because we do not make a list of which modules work 100% in magisk in P10, since for example xposed produces a hard brick.
Sorry my bad english
Is this still available [email protected]?
I got this error message:
The response from the remote server was:
550 5.1.1 Error: invalid recipients is found from 209.85.216.178

Any working root for Unlocked T-Mobile Variant?

I just got my bootloader unlocked this morning and I am ready to get it started however all I see are Verizon and Google store bought methods
Trippyy Doee said:
I just got my bootloader unlocked this morning and I am ready to get it started however all I see are Verizon and Google store bought methods
Click to expand...
Click to collapse
Interesting wording. If you mean that you can now toggle OEM unlocking on, then unlocking the bootloader with fastboot is the same no matter what device you have.
Badger50 said:
Interesting wording. If you mean that you can now toggle OEM unlocking on, then unlocking the bootloader with fastboot is the same no matter what device you have.
Click to expand...
Click to collapse
Sorry for that lol But what I meant was just any root method using magisk because I used the latest 20.2 and it failed for me. And TWRP if any . Just a point in the right direction basically ?
Trippyy Doee said:
Sorry for that lol But what I meant was just any root method using magisk because I used the latest 20.2 and it failed for me. And TWRP if any . Just a point in the right direction basically ?
Click to expand...
Click to collapse
Magisk is the only way and there is no twrp
p70shooter said:
Magisk is the only way and there is no twrp
Click to expand...
Click to collapse
Is there a working Magisk Canary build that can patch my boot.img?
Trippyy Doee said:
Sorry for that lol But what I meant was just any root method using magisk because I used the latest 20.2 and it failed for me. And TWRP if any . Just a point in the right direction basically ?
Click to expand...
Click to collapse
p70shooter said:
Magisk is the only way and there is no twrp
Click to expand...
Click to collapse
Like @p70shooter said. There is no other way to root besides magisk, and there is no TWRP as of yet. If rooting with 20.2 didn't work, then try 20.1. You can find it here :good: https://github.com/topjohnwu/Magisk/releases
Trippyy Doee said:
Is there a working Magisk Canary build that can patch my boot.img?
Click to expand...
Click to collapse
Don't know. I just use stable, like they recommend. I know people do use Canary just fine but can't help you there
p70shooter said:
Don't know. I just use stable, like they recommend. I know people do use Canary just fine but can't help you there
Click to expand...
Click to collapse
This what I'm getting when I keep trying to patch it. And it is the correct stock image with my build number.
Edit : I'm just going to have to do this after work . I thought I had time but I'm just rushing probably just missing everything.
Thanks for the help guys
Trippyy Doee said:
This what I'm getting when I keep trying to patch it. And it is the correct stock image with my build number.
Edit : I'm just going to have to do this after work . I thought I had time but I'm just rushing probably just missing everything.
Thanks for the help guys
Click to expand...
Click to collapse
Just a little FYI for you my friend. Have you downloaded the factory image coinciding with your current build? If not, then do so, then extract the factory image, then extract the image.zip, then pull the boot.img from there, place it on your phones internal storage, then try to patch it with magisk. I just did it myself with the 20.2 stable version and it worked fine :good:
Badger50 said:
Just a little FYI for you my friend. Have you downloaded the factory image coinciding with your current build? If not, then do so, then extract the factory image, then extract the image.zip, then pull the boot.img from there, place it on your phones internal storage, then try to patch it with magisk. I just did it myself with the 20.2 stable version and it worked fine :good:
Click to expand...
Click to collapse
Yea I was certainly rushing . I used the wrong boot file. Thanks alot. Finally off work so now I get to enjoy rooting my first Pixel phone. ?

SM-G610F 8.1.0 - Root After April 2020 Security Patch

Is it possible to root after the latest security patch and what should I use to root?
Flash TWRP throught odin then flash magisk you're done
pwazoski said:
Flash TWRP throught odin then flash magisk you're done
Click to expand...
Click to collapse
Thank you! All I want to do is setting up my sd card as the internal storage. Is it possible? Because 16 gb is not enough for anything at all.
btarikeren said:
Thank you! All I want to do is setting up my sd card as the internal storage. Is it possible? Because 16 gb is not enough for anything at all.
Click to expand...
Click to collapse
Nope not on stock and if u do it on roms you're recovery won't work until you undo it
btarikeren said:
Thank you! All I want to do is setting up my sd card as the internal storage. Is it possible? Because 16 gb is not enough for anything at all.
Click to expand...
Click to collapse
I think not because i dont see any recovery support sd card f0r j7 seires but u can use usb OTG to install custom rom maybe it would lighter than stock rom
pwazoski said:
Flash TWRP throught odin then flash magisk you're done
Click to expand...
Click to collapse
any magisk ?
drizzyk27 said:
any magisk ?
Click to expand...
Click to collapse
What do you mean by any?? There's only one original magisk with older versions and one with modified UI called canary version.
Latest one is the magisk 20.4 stable one.
tytfusokhszxc said:
What do you mean by any?? There's only one original magisk with older versions and one with modified UI called canary version.
Latest one is the magisk 20.4 stable one.
Click to expand...
Click to collapse
I was asking if any version would do
Or if there is a specific version that has no problems?
drizzyk27 said:
I was asking if any version would do
Or if there is a specific version that has no problems?
Click to expand...
Click to collapse
Generally, Any would do but latest version's always better. Just Try flashing the latest one
If it didn' boot with stock kernel, Then, you can flash Custom kernels Like oxygen and Helios for TW Oreo and then Flash Magsik.

official rom to patch with magisk

Hello there, i have a honor 9 lite (lld-l31) i'm searching a recovery.img to patch with magisk.
thank you for your help. I search for hours on web, but i've found nothing
Catoplepas said:
Hello there, i have a honor 9 lite (lld-l31) i'm searching a recovery.img to patch with magisk.
thank you for your help. I search for hours on web, but i've found nothing
Click to expand...
Click to collapse
Here you go (EMUI 9.1only):
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
Here you can download patched recovery_ramdisk (v23.0), TWRP and Magisk manager 23.0 apk.
If you want, you can update Magisk version via Manager after installation.
Ok, nice. I make a try. Really, really thank you!
Catoplepas said:
Ok, nice. I make a try. Really, really thank you!
Click to expand...
Click to collapse
No problem.
OK, i rooted the devices, but i have a problem: google play service isnt compatible with this device. I tried to use microG but nothing happened.
Do you know how can i fix it?
Catoplepas said:
google play service isnt compatible with this device
Click to expand...
Click to collapse
what device? Nobody here is a telepath...(afaik )
Yes, you've right. Even the same: Honor 9 lite lld-l31. I'm trying to reinstall magisk and seeing what happeninp
Catoplepas said:
google play service isnt compatible with this device.
Click to expand...
Click to collapse
Under stock EMUI?
Can you post a screenshot?
What version of Magisk do you have installed?
Hey man, sorry for my late. Yes, it was the official stock EMUI, using the recovery.img that you linked me.
I just wiped all and did it all again and now it works. I don't know what happened ahhaha.
BTW at this point i can do a guide of this device
Catoplepas said:
Hey man, sorry for my late. Yes, it was the official stock EMUI, using the recovery.img that you linked me.
I just wiped all and did it all again and now it works. I don't know what happened ahhaha.
BTW at this point i can do a guide of this device
Click to expand...
Click to collapse
it would probably be better to use stock recovery_ramdisk for LLD-L31 and patch it via magisk manager. It is true that Recovery and eRecovery are the same for ANE, LLD, BND devices, but there may be nuances...
So download the full stock LLD-L31 9.1.0.xxx from androidhost.ru and use the "Huawei update extractor" to extract the original Recovery_ramdisk.img (if you want to make a guide).

Categories

Resources