Related
I've setup VLC Direct Pro and it works on wifi/LAN.
However, it doesn't work over 3G, it finds the server but just gets stuck at buffering (doesn't seem to buffer anything).
I have opened up and NAT ports 8080 and 5554, I'm 100% sure my server side / network side config is OK because I have a samsung galaxy tab that DOES WORK when streaming over 3G.
I'm pretty sure its not a NAT or firewall issue as I can see a dynamic translation in my router for port 5554 as soon as I hit play, its definitely going through, and like I said it works fine for my other android device over 3G.
The N1 however, going back to the exact same backend, only works over wifi.
??? anyone else seen this?
N1 running Cyanogen 7.03
I have the same issue, except even on 4g.
Tried with a vpn connection, but i can still only browse my files - it will load the file's length and tries to buffer.
ideas?
None lol
Does it work with different device?
Sent from my GT-P1000 using Tapatalk
Must i start VLC on my PC every time?
Hi!
Can someone tell me if i must start my VCL on my PC every time i want to use this? Or can i config it to play even without starting VLC manually?
wintermute000 said:
I've setup VLC Direct Pro and it works on wifi/LAN.
However, it doesn't work over 3G, it finds the server but just gets stuck at buffering (doesn't seem to buffer anything).
I have opened up and NAT ports 8080 and 5554, I'm 100% sure my server side / network side config is OK because I have a samsung galaxy tab that DOES WORK when streaming over 3G.
I'm pretty sure its not a NAT or firewall issue as I can see a dynamic translation in my router for port 5554 as soon as I hit play, its definitely going through, and like I said it works fine for my other android device over 3G.
The N1 however, going back to the exact same backend, only works over wifi.
??? anyone else seen this?
N1 running Cyanogen 7.03
Click to expand...
Click to collapse
You can start vlc with "-I http" parameter.
Put it in a script and put the script in the start folder (for windows).
The Nexus 7 wifi connection hangs and disconnects with some routers / settings.
Connected to a Linksys e4200 v1 lan video streaming, slingbox streaming, and large file transfers hang after 2-4 minutes. Other Android devices connect fine.
Connected to a DLink dir-655 all is fine with the Nexus 7 and other devices.
To test I copied a 500MB mp4 file from my lan server to the N7.
On the e4200 the transfer hangs after 20+%, on the dir655 it completes as expected.
Anyone else notice something like this?
SonicTab said:
The Nexus 7 wifi connection hangs and disconnects with some routers / settings.
Connected to a Linksys e4200 v1 lan video streaming, slingbox streaming, and large file transfers hang after 2-4 minutes. Other Android devices connect fine.
Connected to a DLink dir-655 all is fine with the Nexus 7 and other devices.
To test I copied a 500MB mp4 file from my lan server to the N7.
On the e4200 the transfer hangs after 20+%, on the dir655 it completes as expected.
Anyone else notice something like this?
Click to expand...
Click to collapse
I haven't had any wifi issues on mine. I'm using a different wifi AP at home though.
I find the WiFi connection keeps disconnecting on mine, too.
OliverHaslam said:
I find the WiFi connection keeps disconnecting on mine, too.
Click to expand...
Click to collapse
you should try changing the channel your router uses. I had the same issue with my phone/everything that uses wifi, and changing the channel to something less used fixed it all up
Linksys is crappy especially their firmware causing interoperability issues. Try looking for an alternative firmware. I use OpenWRT and Tomato releases on my Linksys and it works fine with Nexus 7.
hoponpop said:
you should try changing the channel your router uses. I had the same issue with my phone/everything that uses wifi, and changing the channel to something less used fixed it all up
Click to expand...
Click to collapse
It is on my list to try, but with so many other devices working fine, I'm not convinced.
No issues at all with my Actiontec MI424WR running in g/n mode, WPA2 enabled.
SonicTab said:
The Nexus 7 wifi connection hangs and disconnects with some routers / settings.
Connected to a Linksys e4200 v1 lan video streaming, slingbox streaming, and large file transfers hang after 2-4 minutes. Other Android devices connect fine.
Connected to a DLink dir-655 all is fine with the Nexus 7 and other devices.
To test I copied a 500MB mp4 file from my lan server to the N7.
On the e4200 the transfer hangs after 20+%, on the dir655 it completes as expected.
Anyone else notice something like this?
Click to expand...
Click to collapse
I'm not having any connection problems with my e4200, but it's running Tomato firmware rather than stock.
slickie88 said:
I'm not having any connection problems with my e4200, but it's running Tomato firmware rather than stock.
Click to expand...
Click to collapse
That's interesting as I'm running Tomato on the e4200 too, and had the issues.
Note just browsing seemed fine, it was only large transfers, slingbox or video streaming where it hung.
All my other devices work fine, strange.
slickie88 said:
I'm not having any connection problems with my e4200, but it's running Tomato firmware rather than stock.
Click to expand...
Click to collapse
Tomato FTW! Have a $30 Asus router with tomato and has outperformed all of my previous routers, even under heavy torrent loads.
SonicTab said:
That's interesting as I'm running Tomato on the e4200 too, and had the issues.
Note just browsing seemed fine, it was only large transfers, slingbox or video streaming where it hung.
All my other devices work fine, strange.
Click to expand...
Click to collapse
Are you two using different security settings maybe? Try comparing?
Hi, I get the exact same problems as the op on my Nexus 7 with wifi issues. None of my other devices have any wireless issues. I am also using a Linksys e4200 with Tomato firmware. I will post later on the exact mod and version of tomato that I am using. Just wanted the op to know that they are not alone, there are others like him out here....
Sent from my Nexus 7 using XDA Premium HD app
I'm not using the same router as you guys, and I have a connectivity issue...
OliverHaslam said:
I'm not using the same router as you guys, and I have a connectivity issue...
Click to expand...
Click to collapse
I think I may have the issue here. Sometimes my WIFI becomes unresponsive. It still shows as connected but it seems it doesn't transfer anything. sometimes some applications even says 'no connection, click to try again'... after a few seconds it comes back.
I'm using a DGND3300 netgear... none of my other android device have an issue nor do my laptops...
ojconcentrate said:
I think I may have the issue here. Sometimes my WIFI becomes unresponsive. It still shows as connected but it seems it doesn't transfer anything. sometimes some applications even says 'no connection, click to try again'... after a few seconds it comes back.
I'm using a DGND3300 netgear... none of my other android device have an issue nor do my laptops...
Click to expand...
Click to collapse
Yep, that's what I get. If you look at the WiFi logo in the status bar, you'll see it turn grey and then reconnect.
OliverHaslam said:
Yep, that's what I get. If you look at the WiFi logo in the status bar, you'll see it turn grey and then reconnect.
Click to expand...
Click to collapse
mine rarely turns grey... most of the time it stays blue but no movement. when in notice its happening, i can switch to another app, say play store and it will just sit there doing nothing, it will take a minute or so before start transmitting again.
is there a way to report this to google? wifi issues are very common nowadays and seems like it can be easily patched by them.
Only times I get grey WiFi is when I'm linked to either mine or my missus' phones when were out and about. Zero problems with connecting to peoples WiFi, used the awful Sagecom router that Sky provides, BT HomeHub3 and a few Belkin ones.
Maybe its an issue with your router rather than the tablet?
Sent from my Nexus 7 using xda app-developers app
I haven't noticed any disconnects but the signal often isn't as strong as my macbook even when they're next to each other..
Sent from my Nexus 7 using xda app-developers app
jabsys said:
I haven't noticed any disconnects but the signal often isn't as strong as my macbook even when they're next to each other..
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
That's just because of the hardware and firmware being different. It's the norm with these tablets, however WiFi reception is still very good for me.
OP, I'm running a linksys e4200 myself and I haven't had trouble with it and I push it pretty hard downloading large roms and stuff. I help run an android hosting site so I spend a lot of time testing by downloading 560 mb roms over WiFi while I'm tweaking and recording data on performance increases and decreases.
My router has some settings adjusted but it's mostly just how it came out of the box.
I don't use 5 GHz spectrum because Android likes 2.4 much better.
I would use the WiFi analyzer app and check and see if you're on a good channel and next I would factory reset your router if possible.
Sent from my ADR6425LVW using xda premium
CharliesTheMan said:
That's just because of the hardware and firmware being different. It's the norm with these tablets, however WiFi reception is still very good for me.
OP, I'm running a linksys e4200 myself and I haven't had trouble with it and I push it pretty hard downloading large roms and stuff. I help run an android hosting site so I spend a lot of time testing by downloading 560 mb roms over WiFi while I'm tweaking and recording data on performance increases and decreases.
My router has some settings adjusted but it's mostly just how it came out of the box.
I don't use 5 GHz spectrum because Android likes 2.4 much better.
I would use the WiFi analyzer app and check and see if you're on a good channel and next I would factory reset your router if possible.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Do exactly as he said use Wi-Fi analyzer and change to the strongest channel router
Sent from my SGH-T999 using xda premium
I bought my chromecast the day it came out. Since I have gotten it I have had nothing but problems with it.
First, getting it to connect to my WiFi was a complete pain in the ass. It took me 2+ hours and my final solution was to disable NAT, connect the chromecast, then re-enable NAT. So, fine. I got it to connect and it kind of worked.
~20% of the time it works flawlessly.
Now, the other 80% of the time it will say ready to connect and say it is connected to my home WiFi but the chromecast app either says there are no devices or there is a device that needs to be setup. Also, if I manage to get it to work and start playing a movie on netflix, I often lose the control over it during the course of the movie and the only way to stop it from playing is to unplug the dongle.
Has anyone else had this awful of an experience? What would be the cause? I am contemplating going and buying a new router (mine is a modem/wireless router for centurylink MN: C1000a).
athorax said:
~20% of the time it works flawlessly.
Click to expand...
Click to collapse
Calls to mind the Anchorman quote: "60% of the time, it works every time."
My first thought is that your AP restricts client-to-client communication, resulting in difficulty communicating between your phone and the Chromecast. However, that doesn't explain the NAT issue you had.
I had some of the same issues with losing controls and not being able to pause or stop a movie/video but the Remote Cast app from the market helped with the loosing controls part. As far as the chromecast losing the network connection unfortunately I ended up hooking up a cheap belkin router in addition to my good router and it works with the belkin just fine without loosing connection.
Sent from my Nexus 4 using xda app-developers app
athorax said:
I bought my chromecast the day it came out. Since I have gotten it I have had nothing but problems with it.
First, getting it to connect to my WiFi was a complete pain in the ass. It took me 2+ hours and my final solution was to disable NAT, connect the chromecast, then re-enable NAT. So, fine. I got it to connect and it kind of worked.
~20% of the time it works flawlessly.
Now, the other 80% of the time it will say ready to connect and say it is connected to my home WiFi but the chromecast app either says there are no devices or there is a device that needs to be setup. Also, if I manage to get it to work and start playing a movie on netflix, I often lose the control over it during the course of the movie and the only way to stop it from playing is to unplug the dongle.
Has anyone else had this awful of an experience? What would be the cause? I am contemplating going and buying a new router (mine is a modem/wireless router for centurylink MN: C1000a).
Click to expand...
Click to collapse
Having similar issues. Using Samsung LED TV. Setup seemed ok, but 'casting' anything from my phone is slow and tediously painful, it even seems to make the apps on the phone slower to respond than if they are *not* casting, i.e. Netflix loads quickly and transitions normally, but when I attempt to "cast" the phone app seems to act slow and the TV seems to take almost a full minute to catch up to what I selected from the phone, if at all.
I have a brand new router; My samsung TV is wifi enabled, I just don't use it much. The thought occurs to me that perhaps there is wifi RF interference so I may attempt to disable the samsung's wifi feature tomorrow and see if the Chromecast behaves more responsively.
I had troubles connecting to my Verizon FIOS Actiontec router. But I learned years ago not to fool with that router as it makes other things worse. So, I've had a separate Wifi hotspot for years (just another router with the router stuff turned off) and my Chromecasts (I have 4 of them) work just fine with that. If I were you I'd go to Fry's, or equivalent, and buy a cheap router and set it next to your existing one. Routers go for as cheap as $14.99. The one I use cost about $25. Your life will be much easier.
My experience has been flawless using the Chromecast in two different locations. Both locations have routers and wireless AP's that run either DD-WRT or Tomato however. There doesn't appear to be anything inherently wrong with the Chromecast hardware overall (but you might have a dud unit), but the reliability of it obviously depends on your wireless AP and router equipment.
What equipment are you using for your wireless AP and router?
Haven't had any issues with mine or my friend's. Two different routers, but both setup and run perfectly. Might be a router specific issue.
BrianAllred said:
Haven't had any issues with mine or my friend's. Two different routers, but both setup and run perfectly. Might be a router specific issue.
Click to expand...
Click to collapse
Mine has been flawless. It set up in seconds and works perfectly.
I have been casting a bunch of YouTube and netflix with no issue.
I've got about the same experience. Turns out as soon as I start casting my Wifi network performance is reduced to rubble and the Netflix & Youtube apps on my phone freeze up. Without casting pings to the (Asus RT-N66U) router is around 5ms. After casting the pings are all over the place (200ms - 1sec) with lots of dropped packets.
I have 3 out of 4 signal bars on the Chromecast, but the problem appears to be reduced if I bring it closer to the router. Almost seems like a HW problem.
I'm using Shibby's Tomato rev 124 on the router btw.
athorax said:
I bought my chromecast the day it came out. Since I have gotten it I have had nothing but problems with it.
First, getting it to connect to my WiFi was a complete pain in the ass. It took me 2+ hours and my final solution was to disable NAT, connect the chromecast, then re-enable NAT. So, fine. I got it to connect and it kind of worked.
~20% of the time it works flawlessly.
Now, the other 80% of the time it will say ready to connect and say it is connected to my home WiFi but the chromecast app either says there are no devices or there is a device that needs to be setup. Also, if I manage to get it to work and start playing a movie on netflix, I often lose the control over it during the course of the movie and the only way to stop it from playing is to unplug the dongle.
Has anyone else had this awful of an experience? What would be the cause? I am contemplating going and buying a new router (mine is a modem/wireless router for centurylink MN: C1000a).
Click to expand...
Click to collapse
o2blom said:
I've got about the same experience. Turns out as soon as I start casting my Wifi network performance is reduced to rubble and the Netflix & Youtube apps on my phone freeze up. Without casting pings to the (Asus RT-N66U) router is around 5ms. After casting the pings are all over the place (200ms - 1sec) with lots of dropped packets.
I have 3 out of 4 signal bars on the Chromecast, but the problem appears to be reduced if I bring it closer to the router. Almost seems like a HW problem.
I'm using Shibby's Tomato rev 124 on the router btw.
Click to expand...
Click to collapse
Google has it on their router page but sounds like you're not running the stock firmware, so could be any number of things.
First thing I'd check is UPnP and multicast. If either are blocked/disabled it will cause trouble.
bhiga said:
Google has it on their router page but sounds like you're not running the stock firmware, so could be any number of things.
First thing I'd check is UPnP and multicast. If either are blocked/disabled it will cause trouble.
Click to expand...
Click to collapse
I run a slightly older netgear router with tomato firmware and everything plays fine... I keep UPnP off because (at least on my router's model) I was told it can cause problems.
o2blom said:
I've got about the same experience. Turns out as soon as I start casting my Wifi network performance is reduced to rubble and the Netflix & Youtube apps on my phone freeze up. Without casting pings to the (Asus RT-N66U) router is around 5ms. After casting the pings are all over the place (200ms - 1sec) with lots of dropped packets.
I have 3 out of 4 signal bars on the Chromecast, but the problem appears to be reduced if I bring it closer to the router. Almost seems like a HW problem.
I'm using Shibby's Tomato rev 124 on the router btw.
Click to expand...
Click to collapse
Try turning UPnP off on your router page, as well as turning off Wireless Isolation
Apk07 said:
I run a slightly older netgear router with tomato firmware and everything plays fine... I keep UPnP off because (at least on my router's model) I was told it can cause problems
Click to expand...
Click to collapse
Yeah UPnP really depends. If it works, leave it. If it doesn't, it's worth toggling to see if it makes a difference.
Mine works flawlessly as long as the wireless signal is good. Setup was an snap (have an ATT Uverse/2-Wire router). All I had to do was put in the password and it connected on 1st try.
Used it the other night in the kitchen and I kept losing controls and it kept dropping out before I remembered that the kitchen TV is in a bad spot for wireless. Moved it to another TV and it was rock solid again.
Just bought mine today, setup and use work great. The only thing is no fullscreen casting (the experimental one) and some frame dropping not using it as it was intended (casting a remote desktop tab for fullscreen games).
It may solve some router issues to include an extender or additional bridged router that has it's own SSID. Just in case it's a compatibility issue. It might help to have a clean slate to troubleshoot with.
I had a number of issues originally when first using it, the setup was very hit or miss (kept failing) and I had huge reception issues.
Later Google OTA updates appear to have resolved the setup issues I had on earlier builds and I ended up solving my reception issues by purchasing an HDMI extension cable and migrating my chromecast out of my home theatre cabinet where it was getting impaired wifi signal.
oarking said:
Just bought mine today, setup and use work great. The only thing is no fullscreen casting (the experimental one) and some frame dropping not using it as it was intended (casting a remote desktop tab for fullscreen games).
It may solve some router issues to include an extender or additional bridged router that has it's own SSID. Just in case it's a compatibility issue. It might help to have a clean slate to troubleshoot with.
Click to expand...
Click to collapse
Yes, contrary to what Google might imply, Chromecast does not have to be on the same wireless network as your other wireless devices. As long as they're bridged, it works fine. That's how Chromecast can be on 2.4 GHz WiFi while my phone is on 5 GHz WiFi, and my computer is wired.
The only hard requirement is that for setup, you need a supported device with 2.4 GHz 802.11b, 802.11g, or 802.11n wireless because it needs to connect to the Chromecast's internal access point that is available during setup.
I have the same router just running merlin instead of tomato. No issues with latency.
I did try it at a friends house and they had some netgear router and latency went through the roof for everyone. Unsure exactly what happened but made the entire wifi network lag horribly.
Sent from my Nexus 5 using Tapatalk
---------- Post added at 06:15 AM ---------- Previous post was at 06:13 AM ----------
rans0m00 said:
I have the same router just running merlin instead of tomato. No issues with latency. I am running 3 rt-n66u's though... 1 as a router and 2 ap's... Maybe the load was spread out enough to not bog down one of the boxes?
I did try it at a friends house and they had some netgear router and latency went through the roof for everyone. Unsure exactly what happened but made the entire wifi network lag horribly.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Sent from my Nexus 5 using Tapatalk
Does anyone elses Chromecast wreak havoc on their network? My other devices slow down, and my router seems to occasionally go in and out. What might solve this? It's not a speed issue, as this doesn't happen when streaming on the computer or wii.
standing by this thread. My tablet phone and laptop all have expirienced this slow down. speed test is still showing a 25ms ping and 30mbps down, but youtube and play store are timing out on both my phone and tablet, and when trying to cast from any device, the entire thing lags out. then i lose the cast button...
haven't found a solution yet
gsu_golfer said:
Does anyone elses Chromecast wreak havoc on their network? My other devices slow down, and my router seems to occasionally go in and out. What might solve this? It's not a speed issue, as this doesn't happen when streaming on the computer or wii.
Click to expand...
Click to collapse
When I set up the Chromecast for the first time, my router totally locked up. I rebooted it and haven't had any problems since. I am running an ASUS RT-AC66U w/ Merlin-ASUSWRT firmware.
I have a similar problem. I use my Chromecast and then my router chokes up till I reboot it.
My dlink router was from 2007 and chromecast would lock it up completely. Bit the bullet and bought a new router and haven't had any issues since.
Ph33zy said:
My dlink router was from 2007 and chromecast would lock it up completely. Bit the bullet and bought a new router and haven't had any issues since.
Click to expand...
Click to collapse
Been considering getting one anyways. Might as well do it.
Chromecast slowing my internet connection
Experiencing an issue kind of similar to the OP's. Basically while my Chromecast is plugged into the TV, even when not in use, it slows my internet connection. I normally get between 25mbps and 35 mbps down on a speed test and gaming as well as file downloads work great. As soon as I plug Chromecast in, my download speeds on a speed test drop to about 1.5mbps to 6mbps. All of a sudden online gaming is basically impossible due to ping spiking and downloading files becomes extremely slow. If I unplug the Chromecast my internet speeds return to normal. I don't know what Chromecast is doing, but something is taking it's toll on my network.
Rebooting the router (Linksys E1000 I believe) has down nothing to resolve the issue. Does anyone know what could be causing this? Is there a way to make Chromecast hibernate or something when it's not in use? Any information about what could be causing the issue or things to try would be helpful. Thank you
Corrected the issue
I was able to fix the issue. Turns out my Cable Modem has a built in router that my computer was plugged into. I also have a linksys (wireless) router that is connected here. The chromecast is connected to the linksys router. I unplugged my computer from the cable modem (router) and plugged them into the same router as the Chromecast (Linksys). This appears to have fixed the issue. Someone that is better with this stuff could probably explain why, but I just wanted to follow up.
Totally!
I had this problem too. I have a Chromecast, AppleTV, GoogleTV and Ouya all right next to each other, with the Chromecast in an "always on" state. Ever since plugging in the Chromecast, network performance on the AppleTV and GoogleTV has been unusably slow. Even VNCing into my desktop PC, which is hard-wired into my cable modem, was slowed down.
I unplugged the power on the Chromecast last night, rebooted the AppleTV and GoogleTV and voila they work wonderfully. Network performance on other connected devices seems to be much better as well.
Would having several wifi devices in close physical proximity be the cause, or is it more likely Chromecast's need to be "discoverable"?
FWIW my wireless router is an Xfinity modem.
chomecast network issues
Hi, I'm wondering if anyone has found a solution to this, The Chromecast works but it makes my network unuseable. FWIW I have an Asus RTn56u router that has no problems otherwise
artiemd said:
Hi, I'm wondering if anyone has found a solution to this, The Chromecast works but it makes my network unuseable. FWIW I have an Asus RTn56u router that has no problems otherwise
Click to expand...
Click to collapse
Can you describe what happens in a little more detail?
Does your network get slow, does your Internet get slow, do your devices suddenly say there is no wireless network? Something else??
"Unusable" can mean a lot of things.
bhiga said:
Can you describe what happens in a little more detail?
Does your network get slow, does your Internet get slow, do your devices suddenly say there is no wireless network? Something else??
"Unusable" can mean a lot of things.
Click to expand...
Click to collapse
,
Sorry, thanks for responding..
My internet access on other devices becomes very slow to the point of being unusable if the Chromecast is plugged in.
artiemd said:
My internet access on other devices becomes very slow to the point of being unusable if the Chromecast is plugged in.
Click to expand...
Click to collapse
It's slow - but it still works?
Hmm, Google says your RTN56U is compatible but to contact ASUS for assistance which I'm guessing means ASUS might have an beta or pre-release firmware that fixes the issue.
Chromecast
bhiga said:
It's slow - but it still works?
Hmm,... Google says your RTN56U is compatible but to contact ASUS for assistance[/url] which I'm guessing means ASUS might have an beta or pre-release firmware that fixes the issue.
Click to expand...
Click to collapse
Yes it's slw but works. I'll check out that link thanks!
artiemd said:
Yes it's slw but works. I'll check out that link thanks!
Click to expand...
Click to collapse
Here's the properly-rendered full table:
https://support.google.com/chromecast/table/3477832?hl=en&ref_topic=3447927
I'm having this same issue. I'm using an Asus rtn16 with tomato firmware by shibby. Quite frankly it's ridiculous that this is a problem for chromecast. My router is a newer model and it should be supported. My roku 3 is able to stream just fine off my WIFI. All I've been able to deduce thus far is that when casting, the wireless interface of my router seems to get ddosed in some way because when pinging the router wirelessly from other devices, the pings skyrocket up to 1000ms and it causes some packet loss. Ends up making the chromecast stream really badly and of course my other devices slow down. When pinging the router through a wired connection during this time, the pings are sub 1ms. So it seems that the chromecast wreaks havoc on the wireless interface for whatever reason. As I said before, no other devices in my home cause the same symptoms. I may try to see what I can gleam from sniffing the network with my alfa usb WIFI adapter which is able to capture everything going across the air in promiscuous mode. I'm not sure if a lower level wireless spectrum analyzer would be necessary but let's hope not. Or let's just hope Google gets this sorted! I realize that some have fixed this by switch routers, but I don't see that as an acceptable solution since no other devices have issues with my router.
wilsonbrett85 said:
I'm having this same issue. I'm using an Asus rtn16 with tomato firmware by shibby. Quite frankly it's ridiculous that this is a problem for chromecast. My router is a newer model and it should be supported. My roku 3 is able to stream just fine off my WIFI.
Click to expand...
Click to collapse
Roku and Chromecast work in very different ways and therefore use the network in much different ways. Chromecast has a discovery protocol that Chromecast-enabled applications use to find Chromecasts on the network. This involves multicast packets, and while most routers handle and allow multicast just fine, some either are stupid/flawed or are shipped with "secured" default settings that block multicast traffic.
After discovery
What applications and content are you casting from?
bhiga said:
Roku and Chromecast work in very different ways and therefore use the network in much different ways. Chromecast has a discovery protocol that Chromecast-enabled applications use to find Chromecasts on the network. This involves multicast packets, and while most routers handle and allow multicast just fine, some either are stupid/flawed or are shipped with "secured" default settings that block multicast traffic.
After discovery
What applications and content are you casting from?
Click to expand...
Click to collapse
Tried youtube, tab casting, and plex.
Youtube barely gets through a video. Tab casting works for a couple seconds, then chokes and loses the connection. Plex buffers every 5 seconds. I actually do notice ping rises to around 500ms when using plex on my galaxy note 8, when the client fetches chunks of video every 10 seconds or so from the server. i noticed that this happens over tcp, whereas tab casting sends a udp flood. but I'm not really sure what is 'normal' as far as the ping going up when the wifi is being used to capacity. I can imagine that saturating the network would do that. I know that plex will pull data in chunks as fast as it can. So that saturates the wifi for about a second or two for every chunk. But I guess for whatever reason, chromecast saturates it even more. Not sure if its because its udp or what, and I don't really know why that would make any difference.
So, streaming with anything else is ok, on both G & N modes, causing ping to go to around 500ms.
When streaming to CC, on both modes, ping can hit 3000ms at times and total packet loss.
I'll see if playing with any of the advanced wifi settings in the router can fix it.
Not sure this is relevant but I have seen a bunch of issues being reported by people using custom Router Firmware....
Not just here but on other sites as well...
Maybe it's just coincidence...
wilsonbrett85 said:
I can imagine that saturating the network would do that. I know that plex will pull data in chunks as fast as it can. So that saturates the wifi for about a second or two for every chunk. But I guess for whatever reason, chromecast saturates it even more. Not sure if its because its udp or what, and I don't really know why that would make any difference.
So, streaming with anything else is ok, on both G & N modes, causing ping to go to around 500ms.
When streaming to CC, on both modes, ping can hit 3000ms at times and total packet loss.
I'll see if playing with any of the advanced wifi settings in the router can fix it.
Click to expand...
Click to collapse
Your network bandwidth seems "bursty" - not a big deal for general data transfer, but definitely an issue for streaming where sustained throughput is important.
What's your signal strength on your Galaxy Note?
Can you increase the signal power on your router?
Also, check your router's orientation. Often times the internal antennae are designed to operate in specific orientations, so putting a router designed to stand upright on its side can drop the signal dramatically as the devices are no longer within the transmission cone/donut.
Since my Chromecast updated to 16664 (official) last week, I have had a bear of a time having any device see the Chromecast. Prior to the upgrade, I didn't have any issues with connectivity. Now the only way I can get the device to work is to do a reset to defaults and go through the setup procedure. The CC will generally work until the next power-up, then the same thing.
When this happens, the ChromeCast's home screen indicates it's connected to my WiFi network, however no Chromecast enabled program, including the Chromecast app on my phone, sees the device.
There have been no changes to my wireless network settings since it worked last. Given that I've not seen anyone else post about this, I must be the only one seeing the problem. Anyone?
I've seen some similar reports over at Plex but not here...
I myself am on 16664 and have no issues seeing my device.
try a Factory reset and see if reconnecting helps at all.
I've had a similar experience. My Galaxy SII and Galaxy tab 3 can see my Chromecast, but when I run the Chromecast app from my Kindle Fire HD, I get the message "No Chromecasts found on <network>". If I do a factory reset on the Chromecast, then the KFHD will find it, but once it's setup, I won't find it again. For me, the solution was to unplug my TiVo Premiere and TiVo Roamio from my network. Then the KFHD can find and cast to the Chromecast. But if either TiVo is connected to my network, the KFHD can't find the Chromecast. It's weird that this only affects the KFHD and not my other android devices.
SFDave said:
I've had a similar experience. My Galaxy SII and Galaxy tab 3 can see my Chromecast, but when I run the Chromecast app from my Kindle Fire HD, I get the message "No Chromecasts found on <network>". If I do a factory reset on the Chromecast, then the KFHD will find it, but once it's setup, I won't find it again. For me, the solution was to unplug my TiVo Premiere and TiVo Roamio from my network. Then the KFHD can find and cast to the Chromecast. But if either TiVo is connected to my network, the KFHD can't find the Chromecast. It's weird that this only affects the KFHD and not my other android devices.
Click to expand...
Click to collapse
TiVos use mDNS advertising for their services.
Recent Chromecast firmware also seems to be using mDNS as well.
Try running Bonjour Browser and see if Chromecast is visible before/after reset or reboot.
Not sure if related but it may help.
My router has 2 channels, 2.4ghz and 5ghz, the chromecast is connected to the 2.4ghz of course, the issue is when another device is also using the 2.4ghz it wont see the chromecast for some strange reason, the second I connect that device to the 5ghz network it will see it and everything will work flawlessly.
kishke said:
Not sure if related but it may help.
My router has 2 channels, 2.4ghz and 5ghz, the chromecast is connected to the 2.4ghz of course, the issue is when another device is also using the 2.4ghz it wont see the chromecast for some strange reason, the second I connect that device to the 5ghz network it will see it and everything will work flawlessly.
Click to expand...
Click to collapse
If your router has a WMM option, try toggling it - on some routers WMM implementation is broken and makes things worse when it tries to kick in and make your media streaming better.
Also, if you're streaming local content from another wireless device you may be exceeding the available bandwidth on the band - see WiFi Bandwidth and Router Considerations for diagrams on how the bandwidth usage can multiply depending on how content is being accessed.
bhiga said:
If your router has a WMM option, try toggling it - on some routers WMM implementation is broken and makes things worse when it tries to kick in and make your media streaming better.
Also, if you're streaming local content from another wireless device you may be exceeding the available bandwidth on the band - see WiFi Bandwidth and Router Considerations for diagrams on how the bandwidth usage can multiply depending on how content is being accessed.
Click to expand...
Click to collapse
Streaming is fine (using plex with pc as dlna) it's just a weird issue that used to happen, haven't noticed it in a while because our phones always connects to the 5ghz network. WMM is on so if it happens again I'll try playing it.
Also I doubt I'm even getting close to the wireless bandwidth cap.
Thanks for your reply tho!
kishke said:
Streaming is fine (using plex with pc as dlna) it's just a weird issue that used to happen, haven't noticed it in a while because our phones always connects to the 5ghz network. WMM is on so if it happens again I'll try playing it.
Also I doubt I'm even getting close to the wireless bandwidth cap.
Click to expand...
Click to collapse
Weird... Might also be a more general network thing like a rogue device with a static IP causing a collision that Chromecast doesn't gracefully recover from, or a multi-interfaced device causing some kind of loop
But yeah, since you have 5 GHz, best to use that and keep your 2.4 GHz usage to a minimum to maximize available bandwidth for Chromecast..
Let me try a few of the suggestions here. I've not had any luck using 2.4 or 5GHz bands on my network...behavior is the same. Also, my router is an ASUS router with Merlin firmware. There is a new thread I've only glanced over, but I'll try some of the things there as well:
http://forum.xda-developers.com/showthread.php?t=2599515
I had to do the factory reset trick again last night so we could watch video on the Chromecast...it obviously hasn't gotten annoying to the point where I'm stopping all other activity until I get it fixed, though. Strange this only started happening after the Chromecast update, but I can no longer remember the sequence of events that go me here (chromecast update, router update, wireless AP added for better wireless coverage, etc).
I've seen similar behavior when there are just too many devices connected to the WiFi at once.
My router maxes out at around 9-10 devices...
Doesn't matter which band they are on either.
But to be sure it isn't an IP conflict I suggest setting DHCP reservations for all your regularly connecting devices to ensure they never get a different IP (especially important to do for servers like Plex) and remove that possibility from the equation.
Just to Add I believe the new 802.11AC Standards solve this problem, But you will need to buy a new router to get it.
Using a bonjour browser, I can see the entry for the Chromecast :
_googlecast._tcp.local.
Bedroom.local.:8009
/192.168.254.193
st = 0
ve = 02
md = Chromecast
ic = /setup/icon.png
id = [a very long number]
fn = Bedroom
ca = 5
Click to expand...
Click to collapse
I'm running the browser that sees that from a Samsung tablet, which is also running the Chromecast setup app that says it can't find the Chromecast.
EDIT: I've tried the factory default recovery method a number of times now. I see the bonjour record go away, then come back after the setup app says I'm ready to cast. All apps can see the Chromecast at that time, then after 3 to 5 minutes, they no longer see the Chromecast. I don't see any difference in the bonjour record when it working from when it's not working.
troycarpenter said:
Using a bonjour browser, I can see the entry for the Chromecast :
I'm running the browser that sees that from a Samsung tablet, which is also running the Chromecast setup app that says it can't find the Chromecast.
Click to expand...
Click to collapse
Just a longshot....But do you have any security software that could be blocking some Apps from communicating with the Network?
It sounds an awful lot like what happens when an AntiVirus Application Monitor has denied access.
Hmm, No, I don't think so.
But I found something interesting. My laptop CAN see the Chromecast, and I can cast Chrome tabs just fine. So far it's only the Android devices that can't see the Chromecast (and at the same time the laptop can). I'm looking for my iPad (I don't use it enough to keep track of it as close as I should) to see if it sees the Chromecast or not.
troycarpenter said:
Hmm, No, I don't think so.
But I found something interesting. My laptop CAN see the Chromecast, and I can cast Chrome tabs just fine. So far it's only the Android devices that can't see the Chromecast (and at the same time the laptop can).
Click to expand...
Click to collapse
That's really odd. Your network has only the ASUS router for wireless, no repeaters or extenders?
-= this post enhanced with bonus mobile typos =-
bhiga said:
That's really odd. Your network has only the ASUS router for wireless, no repeaters or extenders?
-= this post enhanced with bonus mobile typos =-
Click to expand...
Click to collapse
I do have an extender (not a wireless repeater) in place, but it didn't make any difference before the latest Chromecast update. My next step is to try removing the extender, but I don't know if the Chromecast will see the signal coming from the other side of the house (the reason the extender was put in to begin with).
troycarpenter said:
I do have an extender (not a wireless repeater) in place, but it didn't make any difference before the latest Chromecast update. My next step is to try removing the extender, but I don't know if the Chromecast will see the signal coming from the other side of the house (the reason the extender was put in to begin with).
Click to expand...
Click to collapse
It's quite possible that the update changed something about the WiFi connection that your network simply does not like. People have noted similar "introduced issues" with HDMI before. Definitely submit a report with them if you haven't already, and request that updates NOT be forced to avoid issues like this. Being able to dismiss, postpone or even roll back an update would prevent this type of thing.
If it's not the build, I'm not sure what else it might be, unless your router has somehow quarantined your other Android devices on another band or SSID somehow.
bhiga said:
It's quite possible that the update changed something about the WiFi connection that your network simply does not like. People have noted similar "introduced issues" with HDMI before. Definitely submit a report with them if you haven't already, and request that updates NOT be forced to avoid issues like this. Being able to dismiss, postpone or even roll back an update would prevent this type of thing.
If it's not the build, I'm not sure what else it might be, unless your router has somehow quarantined your other Android devices on another band or SSID somehow.
Click to expand...
Click to collapse
Looks like I switched off TKIP and just went AES on that network at some time. I went back and turned on AES+TKIP and now the Chromecast shows up on my mobile devices again. I'll keep an eye out in case that theory doesn't hold out.