Database Develop

[APP] DHD Proximity Sensor Recalibrator 1.10 (26-Sep-12)

Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, I wrote a little app to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to provide an acceptable solution for some.
I present DHD Proximity Sensor Recalibrator. Download from the attachments below.
Here are some screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Possible calibration procedure:
1. Put both values high (will show FAR).
2. Cover sensor with finger.
3. Lower High threshold till it says NEAR.
4. Lower Low threshold by a notch or 2.
5. Test behavior
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system. It might require root rights.
Source code repo:
https://github.com/leppie/DHD-Proximity-Sensor-Recalibrator
Known issues:
- Permissions have changed in CM7 RC2, preventing the application from working correctly. The application will need root. Will investigate how to add that, if needed.
- Some reports that the Gingerbread leaked ROM is not working.
Gingerbread/newer kernel update:
Due to changes in the source code made by HTC to overcome this issue in the kernel, this app will probably not run correctly.
There are 2 problems (as found from latest CM kernel source):
1. When the kernel recalibrates the proximity on the fly, it fails to update the internal structures in the kernel. This makes the kernel not report correct values. I have made a kernel patch to rectify the issue. Please ask your kernel developer to apply the following changes: https://github.com/leppie/htc-kernel-msm7x30/commit/b1d0a85f3fe5252c8ab43ba98261bcb1b8498d8a
2. Secondly and more seriously, depending on the initial calibrated value (if LT is greater or equal to 0x50), the kernel will kick off a polling thread. This will overwrite the changes made by this app, as soon as you use the proximity sensor for the first time (eg the phone). Afterwards you can apply the values from this app again, and from my experiments the value sticks then (up to the next reboot). Unfortunately, this polling mechanism fixes the issue for most users, so it cannot just be disabled. It is easy to disable in the kernel source however, but will probably break most other people's proximity behavior if they do not have this app installed. As you can see, there is not much I can do about this. The best option is to compile your own kernel.
Manual cleaning of the sensor:
After time the sensor will become dirty from the environment. See http://forum.xda-developers.com/showpost.php?p=28495941&postcount=357 for details on cleaning it.
Please report any bug and suggestions.
Cheers
Revisions:
1.0
- Initial public release
1.1
- Replaced toggle button with normal one to resolve known issue
1.2
- Removed amount from Paypal, feel free to donate whatever you feel like. Beers are around US$2 here.
1.3
- Add some better handling when something goes not as planned (likely on non-DHD hardware).
1.4
- Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
1.5
- Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
- Should work on SENSE with custom kernel. Apply this patch (or ask your kernel 'builder' to do so).
- Removed Beer button due to crappy paypal policy...
1.6
- Added support for calling 'su' when permissions are wrong. Thanks VampireWicked.
1.7
- Correct boot permissions for ICS
1.8
- Prevent app from being installed on SD card (which will cause issues) (thanks makarand14)
1.9
- Fix issues with sensor listener not getting disabled (thanks Roberto_Lim and Stoffl_)
1.10
- Fix issues with slow process manager in Android, notably in BlackOut ROM (thanks tonylee000 and others)
Supported kernels:
- CM7 nightly #92 or later
- LorDModUE V2.6 or later

great .. gona try this now ..!!

Simply works. Great job!

jkoljo said:
Simply works. Great job!
Click to expand...
Click to collapse
how do you get it to work? when i move my finger over the sensor nothing happens. it always says near?

Them you have to change the settings. The app works great btw!
Sent from my Desire HD using XDA App

If it says near, make your values higher.
In a bad case, keep your finger over the sensor, and then increase the low threshold till it changes.
Then work from the settings there.

Awesome!
This is my favorite app to date! I couldn't use any Cyanogen mod because of this issue. (My device was not waking up after the first phone call) Everything else worked fine.
Now I can use my phone as a phone too!
Would recommend to any O2 Germany DHD user having similar issues.

Stuclint said:
This is my favorite app to date! I couldn't use any Cyanogen mod because of this issue. (My device was not waking up after the first phone call) Everything else worked fine.
Now I can use my phone as a phone too!
Would recommend to any O2 Germany DHD user having similar issues.
Click to expand...
Click to collapse
Yep i'm O2 Germany DHD user too and had this issue.
This is really a life-saver app, thanks!
You are awesome, leppie!

I didn't even have a problem with my sensor, but I tuned it a little bit anyway. Awesome. THANK YOU

Thanks man! Helped me a lot!
Burkow

I had this sensor problem and did make enquiry in other thread but can't find anysolution.
However, (don't konw since when) it works without any problem now.
Guess I should subscribe this thread just in case I need it in future (hopefully not).
Thanks leppie!
5 stars rated.

Thanks for all the complements.
Added a link to the public source code repository on github.com for those interested.

Hi!
hi!! does anyone know about this app but for the HTC HD mini?
thanks!!!

boxer39 said:
hi!! does anyone know about this app but for the HTC HD mini?
thanks!!!
Click to expand...
Click to collapse
Sorry, that is a Windows Mobile phone. Can't help with that

Thank you guy!! Finally!! Great work

Ace app! Even though I'm on stock, I sometimes get problems with my screen coming on during a call, and my accidentally muting the call. This should help me fix it, by fixing the threshold distance!
Awesome, thanks

leppie said:
Sorry, that is a Windows Mobile phone. Can't help with that
Click to expand...
Click to collapse
it's ok, this thing is killing me!! I just didn't find a buyer yet, but i'm definitly changing it for the desire HD! the best one!!
thanks!!!

T-Mobile G2
hey
will this work on the T-Mobile G2 (Desire Z). If so I will be SOOO grateful to you and I probably will actually buy you a beer. My girlfriend and I both have G2's and the proximity sensor is the only problem with these phones.
Dave

hi,
i have both sensor problems! every second time my phone turns off the screen while phoning but not on again or somtimes the sreen is still on while phoneing
with the app i can set the sensor but still not working during a call
can someone help me?
sry for my bad english

Thank you. Will try it on my Desire HD later

[ROM] 【ShenDu】V4.1.2-130426. 【ANDROID_4.1.2】

Original link
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6126015&extra=page%3D1
ShenDu-Olympus-v4.1.2-130426​
Official updates:
1 repair long press No contact call records, contacts Force Quit
2 repair glory game powder screen
Repair glory notification bar smear
Repair glory volume keys failures
Repair glory camera function
Repair C glory abnormal, restart and other issues
7. The repair status bar transparent restart the entry into force of
Repair unlock the interface drop-down vibration problems
9.C8812/U8818 removal the FPS unlock, unlock will result in many cases changed Caton
10.C8812/U8818 Brush package is no longer with recovery, reduce the volume of Brush Pack
11 adds a new feature: the feedback function (power button + volume, the screenshots and debug logs are stored in the phone memory, facilitate feedback forum)
12 SIM card tool, user-friendly mobile phone business hall
13 Removal of the the version number dev / STABLE words, after only one version, no longer need the version number difference
14. Upgrade comes with UC Browser
15. Freely to cool music box instead of Apollo music player (unloaded)
16. Enhance the security of ADB tool
17. Repair because the storage space due to non-stop scanning depth topics interface Caton, machine heat and power consumption issues (all models)
18 repair desktop digital clock plug-scaling to the most hours abnormal interface
19. Repair desktop icon to repeat the question
20. Repair drop-down unlock no vibration
21, fix the status bar set fully transparent changed back after the restart translucent problems
22. The repair status bar network icon with the data using the left shift of
23 drop-down notification bar Close WIFI, hint system user interface Force Quit
24. Repair call FC
25. Repair C8860E problem of sonic boom
26. Repair C8860E private beta call sound
27 P970 GPS fix can not locate the problem
Transplant repair:
To repair camera black and white, Albums No photo;
Optimized build.prop to improve performance;
The 3 all applications optimized zipaligned;
Streamlining the part of the program;
Repair USB storage problems,
Repair permissions management can not be authorized;
Repair theme can not be applied;
Repair can not be shut down, increasing the shutdown software;
9 repair WIFI establish the hot issues.
BUG:
The shutdown of the power button option and enter the Recovery restart, software solutions.
And CM10.
Photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
download:
http://www.mediafire.com/?ao6s51679cutkv2

I did not quite understand errors
out of them Does it work all????

Warning: Without the ICS/JB kernel, this rom will have the same bugs of the others CM9/CM10.

Cloulu said:
Warning: Without the ICS/JB kernel, this rom will have the same bugs of the others CM9/CM10.
Click to expand...
Click to collapse
not got unless perhaps you the updates put new in here stated as "10.C8812/U8818 Brush package is no longer with recovery, reduce the volume of Brush Pack"
:laugh: oh man have i found dozens of those Asian variants of CM9 floating around those boards. Those guys get creative with this stuff. Just as creative as Google Translator gets whenever you try to translate their forum into English. Every sentence mentions something about brushing something or not brushing anymore, I cannot figure out what that is supposed to be in translation.
All in all in my opinion, unless you speak the language to understand the UI labels and can translate things safely for others to try using it, don't bother posting a system build in a language that Google can't even translate properly, let alone some noobanian with his first smartphone try flashing this with no experience thinking the language can be just be changed after you flash it, whats the big deal?
Everyone of these threads someone posts from elsewhere without any translatation available or even tested with at the least, always ends up being a never ending saga of questions about how to fix someone or does something work.
What's the point uriel? You know how to do this development stuff especially as your rom was also in another language and had to be converted. Woulda been much more significant of a find if you could translate this brushing ShenDu nicely done cm9 from the other side of the planet

10.C8812/U8818刷机包中不再带recovery，减少刷机包体积
The 'brush' refers to 刷机, which means wipe. so brush package probably means the flashable zip.
This means "The flashable zip no longer includes recovery, resulting in a smaller zip size".
I would give him the benefit of the doubt, since there should be a sizable amount of users who understands Chinese, like me. Unless XDA has rules specifically against posting ROMs in another language (correct me if that's the case), I guess this could be interesting/useful/good to know.
And Google Translate fails because it doesn't recognize the tech jargon Chinese uses.

I got reboots everytime the screen went off

Does it have full English support/translation?

edxmon said:
Does it have full English support/translation?
Click to expand...
Click to collapse
Yes so far my experience with shendu/thinte.vn/develoid-korean roms is that they ship with native + english language. PLUS a CM based rom automatically comes with English imho (Might I be wrong who knows).

has Spanish language? Gapps?
Enviado desde mi MB855 usando Tapatalk 2

sounds pretty good
sounds pretty good, I´m gonna try it tonight.
is there an specific way to install it? or do I just flash it from my recovery?
does it come with the kernel or do I need an specific kernel fisrt?

Show me a ROM that doesn't come with a kernel.

ravilov said:
Show me a ROM that doesn't come with a kernel.
Click to expand...
Click to collapse
On SE Xperia x8 kernel flash separately

Thank you. I couldn't figure out what's being meant\implied by the whole brush thing that they mention so much. I know all about the bbs.gfan.como forum for Android. I actually took the time to figure out how to create my own account to be able to log in, gain points on the forum just so I can get access to the links to download those roms that get posted up there. The translation is hard to get past though as some of these services online do a ****ty job translating exactly whats being said. But those devs have some creative ideas and methods of doing things that we would all appreciate if the translation thing coulld be made possible and easier.

this notification bar awasome. maybe uptade?

For anyone else interested in trying this rom out in plain english, i made a few changes to the build.prop and switched a few files with known working english copies from epinter's. Got everything to boot up on first try, no random reboots so far, calling works, wi-fi works, everything is functional and in English. Check out the screenshots i attached below.
Direct link to download ShenDu

android-DEP said:
For anyone else interested in trying this rom out in plain english, i made a few changes to the build.prop and switched a few files with known working english copies from epinter's. Got everything to boot up on first try, no random reboots so far, calling works, wi-fi works, everything is functional and in English. Check out the screenshots i attached below.
Direct link to download ShenDu
Click to expand...
Click to collapse
How many themes does this rom come with, and how many are available for download? I like the transparent top bar but dislike the iOS like icons

android-DEP said:
For anyone else interested in trying this rom out in plain english, i made a few changes to the build.prop and switched a few files with known working english copies from epinter's. Got everything to boot up on first try, no random reboots so far, calling works, wi-fi works, everything is functional and in English. Check out the screenshots i attached below.
Direct link to download ShenDu
Click to expand...
Click to collapse
I flash rom downloaded from this link. It's a beautiful rom
But it still Korean Language.
I set it to Englist, but all icon and some application still on Korean
And the keyboard doesn't work

suicune221 said:
I flash rom downloaded from this link. It's a beautiful rom
But it still Korean Language.
I set it to Englist, but all icon and some application still on Korean
And the keyboard doesn't work
Click to expand...
Click to collapse
Just double checked it and it is in English. I also threw in the keyboard after you mentioned it doesnt work, i overlooked the keyboard my first time testing this rom and included the working keyboard from epinter's cm10...
link is still the same but the zip file has been updated
http://www.citizeninkstudios.com/ShenDu.zip

closed

oh no, not another AOSP ROM,
but this ist actual the best AOSP Rom for the Redmi Note 2.
1. Multilanguage, Camera and LED notification work fine. Vibrate on touch is not working, but vibrate on notifications are working fine.
Battery is not better then on other AOSP Roms, and far away from MIUI.
2. Not the pesky 3G , G and H symbols , these are reasonable in reception symbol with inside ->
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Xposed is pre installed, you don´t need to flash self
4. very less Bloatware, where nothing disturbs you
5. The download speed display is finally gone and you can take advantage of Gravitybox (significantly smaller)
6. The display " flickers " no longer ( like other AOSP Roms)
Full Changelog: Translate with Google
Based on open source projects AOSP production, comes back cards, etc., stable and practical
Recovery brush into a third-party, must Shuangqing front brush, pay attention to back up personal data
Xposed Framework v75 update to the latest version, brush machine process automatically loaded, no user manual brush into
Timer switch function
Smooth video enhancement tools
Only a default desktop, removing unwanted desktop plug
The main screen to add an analog clock
The default boot language to Chinese
The default time zone for China
ROOT privileges intact
Set in the Advanced Settings function add
Default load Xposed framework, without the need to manually brush into the frame
Brush completed manually check the settings - Advanced settings -Xposed frame - module module, can be used after restart
Immersive status bar, so that all third-party support immersed APP
Green guard, to prevent APP background
Gravity kit , adjust the status bar, button, display, notifications, full DIY ROM
Transition animations, adjustable list of animation, animation system, pop-up message animation, to energize your ROM
The status bar network speed, mobile data display, WIFI network speed down the line
The status bar icons, change data, WIFI, battery icon, modify the clock, the operator text messages
Viper sound effects to enhance the sound quality of music artifacts
Originalthread: http://bbs.ydss.cn/thread-588454-1-1.html
ROM Download link: https://mega.nz/#!mF0QURRC!XsIf0f9k2ybs69-WPz0AKONnHybQcjBDVe6j7FrlM5w
DeepSleep FIX:
if you use the volume rocker(VOL+/VOL-) but ONLY when the screen is turned off, then the phone go not back to Deepsleep.
To fix this, you must replace "android.policy.jar" with this fixed Version: http://www18.zippyshare.com/v/om8DXTik/file.html
To install you can go in TWRP / system mount and then push by ADB in / system / framework .
Downloadmirror: http://yunpan.cn/cFfqtz7EprXaN
How to Download from Downloadmirror:

What about notification LED?

Thanks! What about camera? As I understood, latest aosp roms had issues with the main camera.

camera and LED notification work
Battery is not better then on other AOSP Roms.

aidac said:
Thanks! What about camera? As I understood, latest aosp roms had issues with the main camera.
Click to expand...
Click to collapse
The Main Camera works fine with this rom. I tested it over the day and the only issue i found was battery life (again). You will make it through a day, but Idle takes a lot of battery (compared to original MIUI). So if you hate MIUI as much as i do, than you may have to charge your phone once a day, even with a SOT of only 2h, but if you can live with MIUI, you should wait a few more days (or weeks). I will flash non MIUI Roms until i found one with great battery life and without anoying stuff.
Edit: I believe I've found the reason for the bad battery life. The phone doesn't enter deep sleep and is always awake. I will try to reflash the rom, maybe I can solve this problem that way.

reflex9000 said:
camera and LED notification work
Battery is not better then on other AOSP Roms.
Click to expand...
Click to collapse
But just works with one color or it has a menu to configure them?

wasd- said:
But just works with one color or it has a menu to configure them?
Click to expand...
Click to collapse
There is no menu to configure them, but you could download one of the many apps from the playstore or even from xda. Whatsapp, for example, has its own led light configuration and that works. For me normal chat messages are white and groupmessages are blue and both works.

The battery issue seems to be gone. After wiping the dalvik and cache again (first wiped, after flashing the rom), it seems, that the phone enters the deepsleep normaly and the battery doesn't drain as fast, as it did before. I'll look how much battery i will loose tomorrow, but i think, that this rom is the best out there to avoid MIUI

Is audio over Bluetooth and voice calls on speaker working fine?

z2k said:
Is audio over Bluetooth and voice calls on speaker working fine?
Click to expand...
Click to collapse
Audio over Bluetooth works and voice calls on every speaker (including speaker over bluetooth) works fine as well. I will try to remove the bloatware of the zip tomorrow, so if you can wait, you will get a clean rom for flashing
You just have to flash the zip and gapps and your phone will be MIUI free, without any noticeable bugs (HDR is not working, but i dont use it, so not noticeable for me )

Flash this ROM..
Better than other from my perpective...
but why vibration still not working for me? already turned on "Vibrate on Touch" but still nothing?
did anyone have this same issue? any solution? or there is a trick?

Gapps inclided or not?
Inviato dal mio Redmi Note 2 utilizzando Tapatalk

Sorry guys, vibration does not work with this ROM.
Hope it comes with a update.

reflex9000 said:
Sorry guys, vibration does not work with this ROM.
Hope it comes with a update.
Click to expand...
Click to collapse
confirmed

Vibrate on touch is not working, but vibrate on notifications are working fine.
Battery life is ok for now (been using it for 4 hours since full charge, 87% left).
Camera is working fine.
Antutu scored 45k+.
Just one thing that bugs me is the center clock, as I am unable to remove it. Using gravity box, I can move it to the right, but then it overlapps user selection on the lockscreen. Any ideas?

how to flash?wipe cache,data,dalvik,and system?

I think there arent any gapps. When i installed it, none gapps were installed.

JakobiE said:
I think there arent any gapps. When i installed it, none gapps were installed.
Click to expand...
Click to collapse
There isn't gapps in AOSP and CM...

SkiFire13 said:
There isn't gapps in AOSP and CM...
Click to expand...
Click to collapse
Aosp for my y300 has gapps included in the rom zip...
Inviato dal mio Redmi Note 2 utilizzando Tapatalk

added "DeepSleep FIX when use the volume rocker" in Post #1

[S][CEPHEUS][June] Descendant 12.1 - Android ver. 12.1_r8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Descendant is a customised Android ROM that focuses on enhancing UX and UI
over stock Android along useful features.
Downloads
Head to the download page.
Sources
Github
Same as any ROM.
Do the necessary wipes and flash the ROM.
No wipes are needed between updates from Descendant itself, unless specified.
Listing all the additions would be a huge wall of text, that you wouldn't even read.
So, head over the Telegram group and feel free to lurk.
Preloaded applications
Google Apps are included.
Having a bug or not booting for whatever reason?
Look for "How to report bugs" on this post.
Bug reports without logs will be ignored.
@phhusson | @Letzen | @krule031 | @ezio84 | @linuxct
​

double tap to wake not working for me

tran33 said:
double tap to wake not working for me
Click to expand...
Click to collapse
me too, maybe bug double tap turn off and on
Edit: Fingerprint is great, verry fast and more accurate than all other roms

Vũ Văn Lộc said:
me too, maybe bug double tap turn off and on
Edit: Fingerprint is great, verry fast and more accurate than all other roms
Click to expand...
Click to collapse
Confirmed, will address.

Fw included ?

s It is true that double tap does not work to wake up or to suspend the device. I have to say that it is fantastic in operation. I appreciate the effort for the dedication thanks

This ROM is hella good about everything but battery only by using chrome by 5minutes it drains 7% of battery.
#edit
30min idle 10% out. this is bad

An update has been released.
Changelog
Happy new year.

MalinKaMp3 said:
This ROM is hella good about everything but battery only by using chrome by 5minutes it drains 7% of battery.
#edit
30min idle 10% out. this is bad
Click to expand...
Click to collapse
I don't know what you're doing but your setup might be messing with something.
My Cepheus is actually acting fine battery wise.
Please, try a clean flash with the latest update and do not setup any Magisk module and report back.
Have a nice one!

Dil3mm4 said:
I don't know what you're doing but your setup might be messing with something.
My Cepheus is actually acting fine battery wise.
Please, try a clean flash with the latest update and do not setup any Magisk module and report back.
Have a nice one!
Click to expand...
Click to collapse
Clean flash performed, no magisk or any additional zip flashed, just installed and installed all my daily stuff, also TWRP can't correctly decrypt phone. In few days I'll clean flash do again, however this is lil bit weird

MalinKaMp3 said:
Clean flash performed, no magisk or any additional zip flashed, just installed and installed all my daily stuff, also TWRP can't correctly decrypt phone. In few days I'll clean flash do again, however this is lil bit weird
Click to expand...
Click to collapse
Regarding decryption, this is known stuff.
TWRPs can't still decrypt our /data yet AFAIK.
Let me know, I'll be glad tohelp.

great rom indeed

Will the power button torch function be implemented?

does this ROM pass safetynet?

kazmir said:
does this ROM pass safetynet?
Click to expand...
Click to collapse
Yes.
foxa88 said:
great rom indeed
Click to expand...
Click to collapse
Thanks
baggino said:
Will the power button torch function be implemented?
Click to expand...
Click to collapse
No, there's a QS tile and a lockscreen button shortcut already for torch.

Dil3mm4 said:
Regarding decryption, this is known stuff.
TWRPs can't still decrypt our /data yet AFAIK.
Let me know, I'll be glad tohelp.
Click to expand...
Click to collapse
since a few days just left when I did clean install again I can say it's better and worse in some cases. I don't know what the heck is with my phone nor my instalation but, as previously said battery drain, for now its better but not the best, 2 hours of doing nothing 20% are gone, maybe there is too many apps in bg or some doze just dont work. i dont know, while using navi there is quite simillar battery drain maybe lil higher but it's normal I think.
I think this is pros regarding to previus state but now there are another problems.
From time to time screen just turns black and there is nothing I can do other than force reboot. It happens most while using Navi but just 40minutes ago it happend while charging on Qi. Weird...
For now this is everything, maybe it has a lil bit slower Fingerprint scanner than previously but actually this isnt most important since I use pin more often. Tommorow I may be able to send ss from baterry drain

January update is rolling out​Changelog
Bug fixes
Fixed a few issues that prevented Bluetooth audio connections to be successful
Improved Qualcomm BT audio codec selection for eligible devices
Improvements
Improved refresh ratio for eligible devices
Improved font usage in system
Interface changes
Power menu will now use Monet colors
Quick settings header layout has been restyled
New features
Double tap to sleep on status bar has been added in:Settings -> System -> Gestures
Lens can now be opened via lockscreen buttons in:Settings -> Display -> Lockscreen
"What's new" app is now available to check current release changelog
Security patches level
5 Jan 2022
Downloads Here

According to my previous messages about battery
Today, I'll perform an update and check how's battery doin

April update is rolling out​Changelog
Bug fixes
Solved an issue that was causing collision between Sony's styled clock and weather
Solved an issue that was causing wrong scaling for vibration icon in volume bar
Solved an issue that was preventing Sony's styled clock to correctly update time
Solved a typo in Settings for the word "lockscreen" in English localization
Improvements
Improved fingerprint processes haptic feedback
Improved Gestures Magic operativity on clean install
Improved the amount of available apps tinted icon for launcher
Interface changes
Brightness bar transition from unexpanded Quick Settings Panel to fully expanded Quick Settings Panel has been improved
New features
Face Unlock has been added
Fullscreen gestures, added in : Settings > System > Gestures > System navigation > Gesture navigation (gear icon)
What's new can now check and notify for Descendant system updates
Weather app has been added and will feed weather infos to the system and users
Security patches level
April 2022
Downloads Here

am i being forced to disable adblock? Seriously? I don't have adblock.
Whoops! Seems like someone tried to cheat the download system? Try again later, or close this tab.

[CLOSED][ROM][ANDROID 12][One UI 4.1] NekkoOs v2.0 A71

NekkoOs ROM ^_^​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​-It is a modification of the stock ROM, I removed all the junk and little used apps, added a few mods (Credits at the end) and optimized the device. The battery is really better than before as well as the response speed.
Note: The S version is a copy of the standard version, only the Samsung app is included.All other features apply to both versions.
Disclaimer
#I am not responsible for broken devices or broken SD CARDS
#Do not claim for misuse of the tutorial, everything is tested and working 100%
#You will lose the warranty of your device
#Only use on SM-A71
Spoiler: Features
-Totally debloated(no Gapps and no Samsung App)Only Samsung App in version S
-Dolby Atmos without headphones
-Higher audio Quality(Disabled DRC,which deeply compresses audio)
-Full Edge Lighting Enabled
-HDR Efecct Support
-Multi-user enabled (It is located in accounts and backup)
-Better CPU processing
-Better battery performance
-Better use of ram and optimized for games
-changed some system sounds
-Custom backgrounds
-Includes Via browser and YouTube Vanced
-The Samsung account and its services are deleted (Available in version S)
-Marketing Removed
-Added app lock feature
-Added csc features
•Native call recorder
•Data monitor
•Ultra data saver enabled
-Best displacement
-Better audio for calls
-Camera privacy button
-Secure folder fixed in version S(only with the magisk module)
-High performance mode enabled
-Storage in Google Photo unlimited
-Screenshot sound off
-Removed samsung calendar app
-Removed software update settings section
-Updated security patch
-Other small bugs fixed
Spoiler: Camera Mod
-Added new modes: Pro Video
-Extended pro (video) mode features: Histogram, Focus peaking, zoom, reset button, expanded shutter speed
-Unlimited video file size
-Switch camera (back/front) while recording (Bug: When switching, camera is upside down)
-FullHD 60FPS recording
-24FPS mode for 4K and FHD (Pro mode)
-Second editing in Single Take
-Custom resolutions in live focus
-Beauty feature in live focus
-Torch flash in live focus
-Night mode zoom
-More on the way...
Spoiler: Instructions
-Be Stock Android12 (if not Stock Android 12, please download firmware from SamMobile And use the Odin tool)
-Flash the zip.
-Format factory
-Magisk(Optional) Link
-Restart
- I hope you like it
If you want to use Secure Folder you must flash magisk and this module,until you can add it nativelyInfo: if you have problems performing these steps, I welcome you to the Telegram group where you will be kindly attended
​BUGS: Bluetooth pairing is lost when restarting the device, use the magisk module to fix the error Comment #146
-Android auto not working.
This is not a bug as such, but it is normal for your device to restart in the first 5 minutes of use, do not worry, it only happens that time and that's it
New installation method!!!!Flash the zip.don't unzip it.
Links:​No Samsung apps(Versión Lite):​coming soon​With Samsung apps(Version S):​
Running:
face unlock
Fingerprint reader
camera+mods
NFC FIXER!!​
Red carpet:​To @ShaDisNX255 For your files and your patience
@kirbyNx For teaching me something else
@Kun Benji For accompanying me in the process and testing the modifications.
@xS1lent For repair secure folder.
@SkylinesHD
This is a customized ROM and for end users only, ROM or any part of ROM/mods not allowed to redistribute,modify or to use as base to prepare new ROM/ part of other ROM.​
​

¡Soy nuevo en estos repositorios, si hay algún error por favor notifíquenme!
Mod translation via GT: I'm new to these repositories, if there are any errors please notify me!

Enjoy

Nice ROM..am next to try it

Kun Benji said:
Nice ROM..am next to try it
Click to expand...
Click to collapse
I assure you that you will have no problems, autonomy is really good

N3KkoDark said:
I assure you that you will have no problems, autonomy is really good
Click to expand...
Click to collapse
Alright Alright let me just setup myself, I should do it

Is there call recording feature in samsungs default calling app?
Cam + face unlock + fp working?

SolitaryRockzy said:
Is there call recording feature in samsungs default calling app?
Cam + face unlock + fp working?
Click to expand...
Click to collapse
There is no native call recorder, you must use a third-party app, it's not a big deal but at least it's something, and everything works, camera, face unlock and fingerprint.

N3KkoDark said:
There is no native call recorder, you must use a third-party app, it's not a big deal but at least it's something, and everything works, camera, face unlock and fingerprint.
Click to expand...
Click to collapse
Will give it a try soon

SolitaryRockzy said:
Will give it a try soon
Click to expand...
Click to collapse
I would love for you to leave your experience in the comments

Very very super rom ......he made newest something diffrent from all....ncx and Kirby I think very slow from nekko.....very gud nekko.....give me your paypal i donate u for this ......and always make like this .....when u make twrp for a71 .......i flash your rom....good work for me......and i wish one day u become super top member of xda ....thanks bro for rom......nekko.....

@N3KkoDark Please check your PM inbox. Thank you.
-Regards: Badger50

Nice ROM. It's good to see someone start to show interest in developing. If I can help in any way let me know and I'll try to show you the small information that I've learned.

ShaDisNX255 said:
Nice ROM. It's good to see someone start to show interest in developing. If I can help in any way let me know and I'll try to show you the small information that I've learned.
Click to expand...
Click to collapse
Without a doubt I will come to you, since we talked I understand this world much better. Thank you brother.

I installed it since you uploaded it to the telegram group, honestly the battery and speed characterize your ROM, thank you very much friend, please try to bring the secure folder in future releases

Naidroid64 said:
I installed it since you uploaded it to the telegram group, honestly the battery and speed characterize your ROM, thank you very much friend, please try to bring the secure folder in future releases
Click to expand...
Click to collapse
Thanks for your review, please tell me if the UI sounds changed for you.
Secure folder will come in the next update

yes, the sounds changed and are more pleasant, everything works fine

Can you fix accessibility, it keeps crashing when I try to open it or when an app requests for it

N3KkoDark said:
¡Soy nuevo en estos repositorios, si hay algún error por favor notifíquenme!
Mod translation via GT: I'm new to these repositories, if there are any errors please notify me
Click to expand...
Click to collapse
Krh2232 said:
Can you fix accessibility, it keeps crashing when I try to open it or when an app requests for it
Click to expand...
Click to collapse
I'll fix it soon,in the meantime you can access the accessibility options using the settings browser

Krh2232 said:
Can you fix accessibility, it keeps crashing when I try to open it or when an app requests for it
Click to expand...
Click to collapse