I had the Nook HD+ running CyanogenMod for a few years.
I changed nothing, but lately it stopped working, complaining about Trebuchet, so I changed the launcher and it worked again, but giving occasional errors about an app not starting.
In the last few days it also started sporadically rebooting itself. Plunging it in did not seem to change anything. Lowering the max CPU speed from 1.5GHz to 1.1 did not help.
Now, it would not start at all – it would always get stuck at the circling CyanogenMod boot screen. It would still shut down using a long press.
I can start the rescue fine, with no unwanted reboots.
I do have a small amount of data there that I would like to be able to take out, if possible.
I don't care for any specific OS version/mod.
What do you think is the cause of this issue?
How can I fix this? Can I get the Data out?
Btw, in the years it was working, it did have an issue of sometimes restarting instead of shutting down.
I never knew if it was a fault with my device or the with latest CM.
Kov8 said:
I had the Nook HD+ running CyanogenMod for a few years.
I changed nothing, but lately it stopped working, complaining about Trebuchet, so I changed the launcher and it worked again, but giving occasional errors about an app not starting.
In the last few days it also started sporadically rebooting itself. Plunging it in did not seem to change anything. Lowering the max CPU speed from 1.5GHz to 1.1 did not help.
Now, it would not start at all – it would always get stuck at the circling CyanogenMod boot screen. It would still shut down using a long press.
I can start the rescue fine, with no unwanted reboots.
I do have a small amount of data there that I would like to be able to take out, if possible.
I don't care for any specific OS version/mod.
What do you think is the cause of this issue?
How can I fix this? Can I get the Data out?
Click to expand...
Click to collapse
Hi Kov8.
I was running CM 11.1 for ovation and experienced the same thing. My solution was to install a newer version.
To save your data, set up an SD card (be sure you have enough extra room for your data) with the TWRP 3.0.1-0 version here:
https://notredame.app.box.com/s/26a4bygh9vbaw7jjq08xr5evomvaw5ww/folder/3332706778
Load TWRP and look for the File Manager. I think it's under "Advanced." You can use that to copy or move your data to the SD card.
After that, consider upgrading to AOSP or LNOS. I can install AOSP without much difficulty, but LNOS doesn't go well. More on that in a later post.
If you need more detailed information, look at this post and download the pdf at the end of the first post:
https://forum.xda-developers.com/nook-hd/general/install-cyanogenmod-12-1-barnes-noble-t3211119
Kov8 said:
Btw, in the years it was working, it did have an issue of sometimes restarting instead of shutting down.
I never knew if it was a fault with my device or the with latest CM.
Click to expand...
Click to collapse
Yes. I've been reading that all the recent ROMs do that.
The solution is to do a standard shutdown followed by a hard shutdown (by holding the power button for 8 seconds).
I suspect that going straight for the hard shutdown caused some file system errors that made installing new ROMs very difficult.
I'm OK now, though.
Thanks for the detailed reply! I will try.
The link for TWRP does not work. Can I install the latest, 3.2.1.0?
Kov8 said:
The link for TWRP does not work. Can I install the latest, 3.2.1.0?
Click to expand...
Click to collapse
That's funny. I just downloaded two copies from that link.
For version 3.2.1-0, it sounds like you're looking at the version from the team win website. I haven't tested that one thoroughly, but I have tried out their version 3.1.1-0. It works pretty well. It gave me some minor error messages here and there, but if I just repeated what resulted in the error, it generally went through on the second attempt without an error.
The link worked for me later. I managed to change to TWRP 3.0.1-0 only after removing the version identifier from the zip file. I later easily upgraded TWRP to the newest.
I also upgraded to the latest AOSP from the same source, without deleting, as I couldn't get the data from one app. I then installed ARM 7.1 pico gapps. Some apps kept crashing, but removing and reinstalling seems to have fixed that.
The only problem, is that now shut down never works, and restart always takes me to recovery. So I just hard shutdown there.
Kov8 said:
The link worked for me later. I managed to change to TWRP 3.0.1-0 only after removing the version identifier from the zip file. I later easily upgraded TWRP to the newest.
I also upgraded to the latest AOSP from the same source, without deleting, as I couldn't get the data from one app. I then installed ARM 7.1 pico gapps. Some apps kept crashing, but removing and reinstalling seems to have fixed that.
The only problem, is that now shut down never works, and restart always takes me to recovery. So I just hard shutdown there.
Click to expand...
Click to collapse
Mind telling how you managed to update twrp from 3.0 1 to the latest? I successfully installed 3.0.1 to my nook hd+, then flashed 3.2.1 img to recovery, now the device stuck at boot.
I simply downloaded to img file from their website (for ovation, my device), placed on the micro-sd, and installed it from TWRP itself. As simple as that.
Are you sure that you got the correct version for your device?
I also always verify the integrity of roms after writing them to a card. I've seen bad cards.
Related
Disclaimer: did several forum searches and google searches and came up empty, so if I missed the exact wording and this is covered elsewhere please don't flame me into oblivion.
For some reason my Nexus One running FRF85B is unable to install or uninstall any apk's. It just hangs at the installing... or uninstalling... respectively. Has anyone else ever seen that?
Installing has always been really darn quick. Now it just appears to be hanging.
EDIT: Adding new symptom: "Manage Applications" shows the apps installed , but their space is forever listed as "Computing...". It's like the manage applications service is just hosed.
Randy
I have seen that as well. I would have to exit (back or home) then when I got back to the applications screen again it wouldn't have to load at all.
Same here, AT&T Nexus One using FRF85B.
The weird thing is, the app(s) actually DO uninstall or install correctly, just that the Market page shows it's not, and hangs at it.
When I force stop the market, then relaunch and check my downloads, they're now reset to the correct info.
Well I'm glad it is not just me. Thinking it was a bad ROM I reinstalled (with complete wipe) Modaco's ROM, then stock Froyo, etc.
Problem went away when I just said screw it and installed CM 5.0.8.
The only problem that persists now is the server error going to the downloads tab of the market. I can't seem to lick that one even though apps download and install fine from the market.
On a side note CM5.0.8 still is snappier than Froyo. I'm salivating at the thought of CM6.
If anyone is also getting persistent errors with the market downloads tab, please chime in. I find it suspicious that I'm having this problem regardless of which ROM is installed.
Sent from my Nexus One using Tapatalk
No matter what I do I still get the server error in the Android Market application when I go to the downloads tab.
I've re-flashed the Froyo Radio and tried both CM 5.0.8 and Froyo.
I don't see others complaining about this so I have to imagine there's something wrong on my end. I just don't know how to diagnose it. Does anyone have any ideas? At All?
Randy
nxt said:
Same here, AT&T Nexus One using FRF85B.
The weird thing is, the app(s) actually DO uninstall or install correctly, just that the Market page shows it's not, and hangs at it.
When I force stop the market, then relaunch and check my downloads, they're now reset to the correct info.
Click to expand...
Click to collapse
I did see that in the CM 5.0.8 ROM, but Froyo is a complete no-go. I've reflashed the radio, and have been using Modaco's ROM because it is the only one I know of that is just a rooted update I can flash with Amon-RA's recovery, but still no luck.
This is scary.
UPDATE
I went all the way back to Stock, Unrooted 2.1 from January, and still get the server error in the downloads page of the Market app. So for giggles, I wiped, created a new gmail account, and lo and behold, everything works. I could download apps, and they showed up in the download tab as installed.
That pretty much puts an end to thinking it's an app/ROM/radio problem, I think.
I then wiped again, went through initial setup with my primary Google account and I'm back to server errors on the downloads tab.
I guess maybe it really IS a server error. Don't know what I can do about it, except gripe...but at least I can stop scratching my head over what ROM/Radio is installed.
After several days of experimenting, the fact is that on any Froyo rom, whether it's stock or rooted, google's or cyanogen's, wiped or not wiped, new gmail account or existing gmail account, what I'm seeing is that, even if I wipe, go into Android and DO NOT enter a google account, going straight to settings | Manage Applications | running applications, shows "Computing..." forever.
Now, if I do a full wipe, it doesn't know anything about my account, right? And the cache, and all that are all wiped. So, what could possibly cause the infinite "Computing..." in the apps?
Does anyone know?
It happened to me as well last night. I was installing an apk (updating over an older version), and it showed "Installing...." forever. No hardware button gave me any response and I eventually had to reboot the machine by pressing the 3 buttons (luckily this worked. I really hate the thought of pulling the battery out...). After the reboot I tried again and it installed without a problem.
I m on a stock Nexus One FRF91, never hv an issue b4 that latest system update. Looks like it is bringing more issues to me...
what 3 buttons reboot the phone?
The same thing is happening to me. When trying to install any market app, it just hangs at "installing. I have to reboot the phone to get it to stop doing it.
Every once in a while, about 1 out of 15 times, I can get an app to install correctly and quickly, but all the other times it hangs.
It started happening when going to froyo. I have tried several different froyo mods and the same thing happens on all of them. When I nandroid back to 2.1 it is fine.
It happens to me with the Rodriguezstyle mod, the Kang-O_rama mod and the evil n-one shot Noir mod.
In order to fix this issue. You MUST do the following steps:
1. Wipe the SD card.
2. Wipe ext partition (if there)
3. Delete spareparts if you have it ANYWHERE on the system
4. Reboot the system into recovery
5. Wipe all cache's
Tada! Fixed!
This fixed it for me on Kang-O-Rama.
I belive the problem is when moving ROMs and the new app2SD feature stores files on the SD. When moving ROM's, it try's to scan them but fails. Something is stuck in a loop and wont stop .
When taking out the SD card, it ALL works flawlessly (give it a go if you need to install some apps to help)
rmagruder said:
what 3 buttons reboot the phone?
Click to expand...
Click to collapse
Press the trackball, volume down and the power button all at the same time.
If you have root then the app quick boot is a one click solution.
When I was or do have a stalling at the install. I clear the market data and this works for me. I also try to keep the cache clear.
[How To] rooted B&N (1.3) with market access working .... no really.....it's working.
My goal - a rooted 1.3 stock device that had full market access back the way 1.2 worked w/ market prior to the update.
I'll preface this by saying I've tried nearly everything from almost every post in XDA in the last month, but I still had no market access and had to side-load all my apks. I get the feeling that there are quite a few of us that tried manulNooter and various forms of tweaks but are still w/out market access so it is for us that I write this.
I read this today and with a slight tweaking of the steps, I now have ROCK SOLID full market access on the first try.
I'll flat out say that all of the work can be chalked up to other people's time and effort, it's only the steps that worked for me I'm outlining here.
Beforehand:
Make sure you have a bootable CWM card (linky)
Make sure you have updates 4.6.18 and 4.6.16a.
Get the B&N 1.3 update here since you're going to revert your NC back to stock
START:
1) Before updating to 1.3 firmware you are required to do a complete wipe (which requires an aborted power-up [simply hold power button down during the launch process] 8 times in a row - or MUCH easier: the following command using adbWirless ).
adb shell
echo -n -e "\x08\x00\x00\x00" > /rom/devconf/BootCnt
reboot
Click to expand...
Click to collapse
2) I waited for the whole B&N setup after the wipe and I went through the steps of registering the device to my B&N account, then I did a factory reset at the "Erase and Deregister the device". It relaunches B&N one more time. After restarting I simply shut down the device before registering it again.
3) I then plugged in my Nook via. USB cable to my PC. I copied the 1.3 update to the root folder of the NC via. the USB cable. You can obtain the 1.3 update here if you didn't earlier.
4) I unplugged the USB. After 2 min. the NC recognized the update, and it did it automatically. It went through a full boot and I then shut down the NC.
5) I put in my CMW SD card with 4.6.18 and 4.6.16a on it. I then plugged in my USB cable into my Nook again to force the launch of CMW
6) In the CMW backup menu, I launched from zip file the 4.6.18, then right afterwards, the 4.6.16a nooters.
7) I shut down the NC, removed the CMW card, and did a regular launch.
8) I chose ZEAM launcher as default
9) I went into ROM manager and fixed permissions.
10) I went into the Market, signed in, and accepted the info, and saw the full, beautiful market populate and I'm good to go.
Hopefully this is a fix that works for everybody.....
(and yes - I know there's a separate thread on how to re-root after 1.3, but it's more of a troubleshooting thread at this point and frankly there's SO much conflicting info. in there I thought it prudent to start a new thread)
jnmoriginpoint said:
My goal - a rooted 1.3 stock device that had full market access back the way 1.2 worked w/ market prior to the update.
I'll preface this by saying I've tried nearly everything from almost every post in XDA in the last month, but I still had no market access and had to side-load all my apks. I get the feeling that there are quite a few of us that tried manulNooter and various forms of tweaks but are still w/out market access so it is for us that I write this.
I read this today and with a slight tweaking of the steps, I now have ROCK SOLID full market access on the first try.
I'll flat out say that all of the work can be chalked up to other people's time and effort, it's only the steps that worked for me I'm outlining here.
Beforehand:
Make sure you have a bootable CWM card (linky)
Make sure you have updates 4.6.18 and 4.6.16a.
Get the B&N 1.3 update here since you're going to revert your NC back to stock
START:
1) Before updating to 1.3 firmware you are required to do a complete wipe (which requires an aborted power-up [simply hold power button down during the launch process] 8 times in a row - or MUCH easier: the following command using adbWirless ).
2) I waited for the whole B&N setup after the wipe and I went through the steps of registering the device to my B&N account, then I did a factory reset at the "Erase and Deregister the device". It relaunches B&N one more time. After restarting I simply shut down the device before registering it again.
3) I then plugged in my Nook via. USB cable to my PC. I copied the 1.3 update to the root folder of the NC via. the USB cable. You can obtain the 1.3 update here if you didn't earlier.
4) I unplugged the USB. After 2 min. the NC recognized the update, and it did it automatically. It went through a full boot and I then shut down the NC.
5) I put in my CMW SD card with 4.6.18 and 4.6.16a on it. I then plugged in my USB cable into my Nook again to force the launch of CMW
6) In the CMW backup menu, I launched from zip file the 4.6.18, then right afterwards, the 4.6.16a nooters.
7) I shut down the NC, removed the CMW card, and did a regular launch.
8) I chose ZEAM launcher as default
9) I went into ROM manager and fixed permissions.
10) I went into the Market, signed in, and accepted the info, and saw the full, beautiful market populate and I'm good to go.
Hopefully this is a fix that works for everybody.....
(and yes - I know there's a separate thread on how to re-root after 1.3, but it's more of a troubleshooting thread at this point and frankly there's SO much conflicting info. in there I thought it prudent to start a new thread)
Click to expand...
Click to collapse
There is no 4.6.18 update - did you mean 4.518?????
Haven't tried this as I am using CM7 nightly builds ... but
Files that you need are here:
http://forum.xda-developers.com/showpost.php?p=17235819&postcount=1
Best regards,
-boggsie
docfreed said:
There is no 4.6.18 update - did you mean 4.518?????
Click to expand...
Click to collapse
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
jnmoriginpoint said:
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
Click to expand...
Click to collapse
Thanks for giving this a shot and posting your experience. I am hoping that one of the smart developer types will work on a Manualnooter (let's say 4.7.0) that will take us from stock 1.3 to root with a fully functional Market. Please, I know you are out there.
By the way, if you load CM7 with a -200 nightly or later then you will not need the LCD density fix as it has already been incorporated. Happy hunting!
jnmoriginpoint said:
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
Click to expand...
Click to collapse
Did you update flash? Thats what causes the loop, I had the same thing happen to me and had to start again from scratch. Make sure you don't update flash through the market or this will happen again.
bobzdar said:
Did you update flash? Thats what causes the loop, I had the same thing happen to me and had to start again from scratch. Make sure you don't update flash through the market or this will happen again.
Click to expand...
Click to collapse
THANK YOU SWEET JESUS
I decided to revert to stock and every time I turned my nook off, there was no return. Every time I reflashed, after I nootered I updated everything from the market. I spent 2 hours trying to find the reason as to why I kept getting bootloops.
This fixed it.
turdferguson92 said:
THANK YOU SWEET JESUS
I decided to revert to stock and every time I turned my nook off, there was no return. Every time I reflashed, after I nootered I updated everything from the market. I spent 2 hours trying to find the reason as to why I kept getting bootloops.
This fixed it.
Click to expand...
Click to collapse
There is a fix to allow updated flash, can't remember which thread but after going through it I have updated to flash v11 without issue. I also got the (latest) market working by going into titanium backup and doing a data wipe of the market app.
Well, I followed all the given instructions, even bobzdar's method after reflashing for the 5th time. I still cannot get full market access. Even amazon market cuts me off. I've come to the conclusion that my only solution will be to move on to cm7. Honestly though, I prefer the stock rom over cm7.
All I want is cut the rope, and boat browser. Is that too much to ask for? lol
turdferguson92 said:
Well, I followed all the given instructions, even bobzdar's method after reflashing for the 5th time. I still cannot get full market access. Even amazon market cuts me off. I've come to the conclusion that my only solution will be to move on to cm7. Honestly though, I prefer the stock rom over cm7.
All I want is cut the rope, and boat browser. Is that too much to ask for? lol
Click to expand...
Click to collapse
For whatever reason, the market took a while to load the first time, but now it works whenever I go into it. Try opening it up and doing a search for something and see what happens. I did a search for flash after running the flash fix to go right to the updated v11 and it took 30 seconds to a minute for the search to go through, but once it did the market has worked normally since. It was odd, but what kicked the whole thing off was doing the data wipe in titanium backup and all of a sudden it auto updated flash and a few other things (indicating market was working), which necessitated doing the flash fix through CWM etc. Now everything is working properly, hopefully it's just working slowly like it was for me and you just have to kind of kick start it by doing a search.
Thanks for the detailed steps, and to bobzdar for his tips. I too was having the "Nook Col" problem even after having done the flash trick, so I started all over and all is working...
EXCEPT, now I can't download my B&N books. I get this error: "Unable to Download: Internal error: Exception executing the command".
I did update superuser among other things, not sure if that made any difference. It won't let me install the Nook app thru the Market, either.
Any suggestions? I'd like to read my books and would prefer NOT to do this all over again LOL.
zogg44 said:
Thanks for the detailed steps, and to bobzdar for his tips. I too was having the "Nook Col" problem even after having done the flash trick, so I started all over and all is working...
EXCEPT, now I can't download my B&N books. I get this error: "Unable to Download: Internal error: Exception executing the command".
I did update superuser among other things, not sure if that made any difference. It won't let me install the Nook app thru the Market, either.
Any suggestions? I'd like to read my books and would prefer NOT to do this all over again LOL.
Click to expand...
Click to collapse
New book or one already in your library? I just downloaded a book from my library without issue but I don't know if I've tried to download a new book since getting the market working again.
bobzdar said:
For whatever reason, the market took a while to load the first time, but now it works whenever I go into it. Try opening it up and doing a search for something and see what happens. I did a search for flash after running the flash fix to go right to the updated v11 and it took 30 seconds to a minute for the search to go through, but once it did the market has worked normally since. It was odd, but what kicked the whole thing off was doing the data wipe in titanium backup and all of a sudden it auto updated flash and a few other things (indicating market was working), which necessitated doing the flash fix through CWM etc. Now everything is working properly, hopefully it's just working slowly like it was for me and you just have to kind of kick start it by doing a search.
Click to expand...
Click to collapse
Well, evry time I did those steps, the market homepage/top apps or whatever seemed to show up blank, saying "No items found" or something like that.
I just decided to go back to 1.2. I like the new market better anyway.
bobzdar said:
New book or one already in your library? I just downloaded a book from my library without issue but I don't know if I've tried to download a new book since getting the market working again.
Click to expand...
Click to collapse
Already in the library. I have about 12 and can't dl any of them. Haven't tried to buy a new book yet, but I doubt that will work either.
It's frustrating because I was w/o the Nook for several days, did all this stuff and it works well other than this and limited market apps which I can live with.
I may have to go thru the whole process again and make sure I dl everything before I apply the hacks.
Installed cmod7 stable (7.2) and the gapps file (found in another link - the one on nookdevs doesn't work). On first boot, it is stuck at a screen that just has a bar that says "Setup Wizard". The bar doesn't appear to be tapable. Search forum, no threads found on this.
Thanks in advance!
Dave
rebooted, still problems
dweaton said:
Installed cmod7 stable (7.2) and the gapps file (found in another link - the one on nookdevs doesn't work). On first boot, it is stuck at a screen that just has a bar that says "Setup Wizard". The bar doesn't appear to be tapable. Search forum, no threads found on this.
Thanks in advance!
Dave
Click to expand...
Click to collapse
I powered off and then on so it would reboot - it went through the setup screens. I get aborts of android.process.media so it won't let me go through the google play icon. When I try to click on Nookreader for android while on barnes and noble web site, it aborts again. I had the latest daily on here 2 days ago and was getting the same abort, but only twice when android first started. Tapping on google play then said "server error" and would NEVER work. Tried through the web - said I needed to use google play app - hence a big loop of nothing working. That's when I went to the "stable" version of 7.20 encore. It doesn't appear to want to do anything right.
Any advice on getting this all to work would be greatly appreciated. Using clockwork with the nook 1.4.3 firmware is getting old just to get back to a device that works, albeit not with full android.
dweaton said:
I powered off and then on so it would reboot - it went through the setup screens. I get aborts of android.process.media so it won't let me go through the google play icon. When I try to click on Nookreader for android while on barnes and noble web site, it aborts again. I had the latest daily on here 2 days ago and was getting the same abort, but only twice when android first started. Tapping on google play then said "server error" and would NEVER work. Tried through the web - said I needed to use google play app - hence a big loop of nothing working. That's when I went to the "stable" version of 7.20 encore. It doesn't appear to want to do anything right.
Any advice on getting this all to work would be greatly appreciated. Using clockwork with the nook 1.4.3 firmware is getting old just to get back to a device that works, albeit not with full android.
Click to expand...
Click to collapse
Perform it in two steps... first flash CM7 alone... reboot it... set up wifi... let it settle... THEN flash gapps and set up google stuff.
still stuck - different place
DizzyDen said:
Perform it in two steps... first flash CM7 alone... reboot it... set up wifi... let it settle... THEN flash gapps and set up google stuff.
Click to expand...
Click to collapse
Thanks so much for the help! I really want this to work!
I installed just CM7 and booted up - got one message about the media thing again but only one. I then went to set up wifi and now I'm stuck at that screen - then n button doesn't pop up anything to let me go back to something - like home.
I don't know if it makes any difference - I did the format data/system reset option then the cm7 flash, but it is still remembering my wireless settings somewhere as it automatically connects and it's a wpa2 network. Is there another step for erasing/formatting something that I missed?
Sorry to sound so stupid - but I'm completely a noob (LOVE the video on the registration page!).
Thanks so much again!
Dave:
nope - still not working
Well, installed cm7 and set up wifi, checked it was working by going to the web. Let it sit a few minutes, then reboot with the microSD and installed the gapps. Rebooted, went through google setup, then tried the google play via the icon on the home screen - same thing. It repeats the android.media.application abort message 2 times and then aborts the google play before I even get anywhere.
So......I'm wondering about my google apps zip file -> it said it was google apps for android 2.x.x, whereas I thought the cm7 I installed was android 3. Does this make a diffference?
Thanks again!
Dave :fingers-crossed:
Click here for the correct Gapps file:
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
still failing
I downloaded the cmod 7.0 file and the gapps (thanks Hoser88!!), created the microSD, booted, did the format data/system reset and installed cmod 7.0. Rebooted, got the same 2 error messages about "android.media.application" aborting, then checked wireless and it was running.
Rebooted with the microSD and installed gapps, removed microSD and rebooted, got the same 2 error messages. Tapped on "Market", it showed a screen with something circling in the middle VERY briefly, then that closed out and the same 2 error messages came up again.
I'm starting to get worried, as I *think* I'm doing what I'm supposed to yet it doesn't work for me. Any and all suggestions are greatly appreciated!
Just to see what happens, I'm going to try the latest nightly cmod7 and see what that does.
Thanks!
Dave
same problems........
I made the microSD with the latest nightly of cmod 7 and the gapps pointed to above. I flashed cmod 7 first, booted, checked wireless, etc.. Still get the same 2 aborts about android.process.media on startup. I then booted again with the microSD and installed the gapps, removed microSD and rebooted. Got the same 2 aborts on startup. Tapped "Market", you see another screen the says "loading" very briefly, then that screen goes away and the android.process.media abort shows and I have to tap force close (this happens twice). I have no idea what this media process is, but is there a way to disable it? I get the feeling it is contributing to my problems.
I'm really lost here. I want this SO bad. I want to have full Android, and have both the Nook and Kindle reader apps so I can keep all my books on 1 device.
Thanks in advance!
dave
Tried more, still fails
I tried a recent suggestion on the cyanogen nook color forum: format data/factory reset and format /system, then install. I did this using the latest nightly and gapps - still got the same abort twice. Found another note in the cyanogen forum saying to go to the rom app and run set permissions and then reboot. I did that - STILL get the aborts. Can't get to google play (shows as "Market") get the quick "Loading" screen followed by immediate close of that and 2 more aborts for adroid.process.media.
I know it remembered my wireless, etc. again. Is there something else I need to format so it completely forgets everything so I'm starting from a clean slate? What can be causing the adroid.process.media abort and how do I get rid of it? Sometimes I think it thinks it is running on a phone, and obviously it's not - do I need to something additional for that as well?
I'm feeling quite confused right now. I've done everything from here and from what I read in the cyanogen nook color forum, but I still can't get this to work. What's the use of running cmod 7 if I can't access the google app store? Please help!
Thank you,
Dave
It works!!
Don't know WHAT I did - I just completely re-downloaded everything - the clockwork image (16gb), the cmod 7.0, and the gapps. Before installing, I went in with the existing install that wasn't working as it should and turned off several apps and cleared their cache when available. I then booted the new microSD - format data/system reset, format /system, installed cmod 7 zip and gapps zip. Removed microSD and rebooted. No more message about android.process.media aborting! It also asked me to set up my Google stuff again, so that was a step in the right direction. I then tried "Market", and IT WORKED!! It still aborts occasionally but I just go right back in and keep going. I did run into something I don't understand - the Nook for Android app page puts a message at the top saying it's not compatible with my device!! Huh? Do I need to may install cmod7.2 stable since this part is working now?
Thanks for the help!! If anyone could help me through the rest of this (get Nook for Android app, getting Kindle for Android app) then I should be good to go from there. I can always download other apps I might want, but I just want to get those 2 working first.
Thanks again!
Dave
It works and I have Kindle and Nook apps!
I updated to 7.20 stable (least wise I hope I did it right - I just flashed from zip but didn't format anything first). After that update I was able to get the B&N Nook reader and the Kindle reader apps! Everything seems to be working fine now - no aborts, nothing!
So.....a BIG THANK YOU to everyone who helped me out!
Thanks SO much!!
Dave :good:
mark as solved?
Some of the other forums I'm on have a set of thread tools - one of which lets you mark the thread as solved. Is there a tool like that on this forum (haven't found it yet if there is) ?
dweaton said:
Some of the other forums I'm on have a set of thread tools - one of which lets you mark the thread as solved. Is there a tool like that on this forum (haven't found it yet if there is) ?
Click to expand...
Click to collapse
Just edit your first post and rename it to [SOLVED] installed cmod7, stuck at "Setup Wizard"
A question for any intellectual Android/Nook-addicts out there...
Basically, I've rooted my Nook HD+ (Numberous times now) and have experience rooting android devices in the past and have had no problems. I used the CWM method - installed universal root on factory stock (And afterwards, 2.1.0 stock just to see if it fixed the problem... it didn't) and extras (Tried not installing extras twice also, didn't make a difference)
Basically, I've learnt the hard way that eight resets on boot and the device hard-resets to factory stock. The first Root Bootup is fine (The bootup after removing the CWM sdc) and, after turning it off and on again, so is the second bootup... But the third one is where the problem occurs. I power on as normal, and the standard 'Nook' screen appears as it begins to boot...
It then proceeds to resetting itself eight times - never getting past the 'Nook' screen that appears at the start of every bootup, therefore causing a hard factory reset.
I've tried using the CWM recover method to the OS I used before rooting the nook originally, and there doesn't seem to be any problems if the device isn't rooted. I've also just let it update itself from factory version to current version - and it works fine with that also.
Perhaps this is common and I'm just a plain idiot. I honestly can't find any answers - so if it is common, sorry for wasting your time!
Thanks for your time!
- P
Do you have some apps being automatically installed by Play Store? Sometime people have their settings set so that happens. Then a root app gets installed and makes some changes to /system and causes a reset. Go to Play Store and tell it not to automatically install or upgrade apps.`
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Do you have some apps being automatically installed by Play Store? Sometime people have their settings set so that happens. Then a root app gets installed and makes some changes to /system and causes a reset. Go to Play Store and tell it not to automatically install or upgrade apps.`
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
No apps that automatically download that i can see. But you're likely onto something - I do install all the apps manually (No matter how menial) (Going through the list, hitting install for each of them) before manually logging into each one afterwards. I do use a few root apps - no ad-versions to avoid those annoying popups, Ultrabox, Superuser, Pimp my Android and Root Browser to name most, if not all of them.
I'm going to have to do things the awkward way now, installing each app, setting them to the setting I want for them, and seeing what happens. I have a mild suspicion it's a setting on Pimp my Android...
I'll let you know if I sort it. Thanks for the suggestion :cyclops:
P Complex said:
No apps that automatically download that i can see. But you're likely onto something - I do install all the apps manually (No matter how menial) (Going through the list, hitting install for each of them) before manually logging into each one afterwards. I do use a few root apps - no ad-versions to avoid those annoying popups, Ultrabox, Superuser, Pimp my Android and Root Browser to name most, if not all of them.
I'm going to have to do things the awkward way now, installing each app, setting them to the setting I want for them, and seeing what happens. I have a mild suspicion it's a setting on Pimp my Android...
I'll let you know if I sort it. Thanks for the suggestion :cyclops:
Click to expand...
Click to collapse
Why are you installing superuser? It is already installed with the universal root. That may be it too.
Edit: And some of the apps I put on there are old on purpose. Like Root Browser. I have it set so that the free version is ad free. If you update it, the ad free goes away.
Sent from my Nook HD+ running CM10.1 on emmc.
I am VERY sorry it's taken me so long to reply! Even though I've only just joined, I should have done it long before now.
I found the problem - it was 'Pimp my Android' app. I was experiencing something called 'boot loop' - so much for my research skills for such a common problem. I fiddled about with my usual settings - and found some that cause it to get stuck like that, even when they're set not to activate on startup!
Tis' all working now. Everything else seems to be just peachy! You were right, thanks for your help
Hey all, I recently followed all the guides on here to update my TP. Was runningn CM9 for over a year, and needed a change. Decided on Jcsullins snapshot, cm-10.1-20131210-SNAPSHOT-VPN-tenderloin.zip, as I need bluetooth and camera to work, and also wanted low battery drain. Did a complete acme uninstall of android, repartitioned system to 600mb, and then used tptoolbox to install.
Now, the rom was very smooth through setup. However, after I started installing apps, about 30, it became very sluggish. pressing the home button I would have to wait about 10 seconds for it to actually go home. Apps would take 10 seconds to startup. Web/facebook scrolling was horribly choppy. Interesting though, if I rebooted, the tablet would run very smooth for the first few minutes. Only after that did it start to become slow.
So I decided to reflash the rom. Did a full wipe in CWM, and reinstalled. Again, tablet was running fine. I decided to only install a few apps this time, about 6, and everything seemed fine. But after a few minutes again, it got sluggish.
I'm wondering if maybe using tptoolbox messed something up? From everything I read about that rom, nobody has any problems with it being slow.
Also, I don't really want a heavily modified rom, which is why I haven't tried the Schizoid rom. I would like to stay at 10.1 for stability. I see the official CM nightlies here: http://forum.xda-developers.com/showthread.php?t=2290346
However, there are no download links to that rom, the link goes to the 10.2 download page. I didn't really want to get into a DM rom at this point. And it seems that bluetooth isn't working on that rom? Am I correct in saying that besides Schizoid, jcsullins 10.1 is the only 10.1 with bluetooth fully working?
Hum, got the same problem 1 year ago, my cm partition at the time was full, Using the TP Toolbox, try to give some space to the cm partition sacrificing some from the shared partition. There are more than 1 cm named partition, i don't remember exactly which one at the time was the faulty. Maybe it was the media partition.
sitlet said:
Hey all, I recently followed all the guides on here to update my TP. Was runningn CM9 for over a year, and needed a change. Decided on Jcsullins snapshot, cm-10.1-20131210-SNAPSHOT-VPN-tenderloin.zip, as I need bluetooth and camera to work, and also wanted low battery drain. Did a complete acme uninstall of android, repartitioned system to 600mb, and then used tptoolbox to install.
Now, the rom was very smooth through setup. However, after I started installing apps, about 30, it became very sluggish. pressing the home button I would have to wait about 10 seconds for it to actually go home. Apps would take 10 seconds to startup. Web/facebook scrolling was horribly choppy. Interesting though, if I rebooted, the tablet would run very smooth for the first few minutes. Only after that did it start to become slow.
So I decided to reflash the rom. Did a full wipe in CWM, and reinstalled. Again, tablet was running fine. I decided to only install a few apps this time, about 6, and everything seemed fine. But after a few minutes again, it got sluggish.
I'm wondering if maybe using tptoolbox messed something up? From everything I read about that rom, nobody has any problems with it being slow.
Also, I don't really want a heavily modified rom, which is why I haven't tried the Schizoid rom. I would like to stay at 10.1 for stability. I see the official CM nightlies here: http://forum.xda-developers.com/showthread.php?t=2290346
However, there are no download links to that rom, the link goes to the 10.2 download page. I didn't really want to get into a DM rom at this point. And it seems that bluetooth isn't working on that rom? Am I correct in saying that besides Schizoid, jcsullins 10.1 is the only 10.1 with bluetooth fully working?
Click to expand...
Click to collapse
Atari-San said:
Hum, got the same problem 1 year ago, my cm partition at the time was full, Using the TP Toolbox, try to give some space to the cm partition sacrificing some from the shared partition. There are more than 1 cm named partition, i don't remember exactly which one at the time was the faulty. Maybe it was the media partition.
Click to expand...
Click to collapse
You can check the size of your partitions by typing "df" without quotes into terminal emulator.
Hope this helps.
Thanks for the suggestions. I checked the partitions, and they are all good. I ended up reflashing a third time, and I've been running it for two days, and it's been fine 90% of the time. A few slow downs, but nothing like before.
However I do have another problem, and I don't know if it's rom related or not. I have an HP slim bluetooth keyboard that paired successfully with the tablet. Works perfectly, except if I leave the tablet unattended for about 15 minutes or so, it doesn't work. I'm fairly sure the keyboard itself is going to sleep. However, when I wake it and the tablet up, the tablet freezes completely. Tonight it even rebooted itself twice. Once was on it's own after I tried to wake the keyboard up by pressing a few buttons. The other I turned the keyboard off and back on, and when it was connected the tablet rebooted.
Seem related to a rom problem with drivers support for bluetooth accessory. If it was working before with the same roms, try to reflash it, otherwise, try another roms or early/newly build.