project treble support??? - Honor 9 Lite Questions & Answers

will Honor 9 Lite support project treble???

gds06 said:
will Honor 9 Lite support project treble???
Click to expand...
Click to collapse
It comes loaded with oreo, so it must.

I can confirm that it supports project treble ??

Have you tried the "getprop ro.treble.enabled" command in the terminal ? If no, could you please confirm whether the value was "true" or "false".

I used treble check app & it says there is support for treble but no A/B partition so no seamless updates.

khanjunaid said:
I used treble check app & it says there is support for treble but no A/B partition so no seamless updates.
Click to expand...
Click to collapse
I'm a little confused. How come it supports Treble if it doesn't have a separate 'vendor partition' which is supposed to bring seamless updates?
I don't think the app you're using is reliable.
Well, either that or I'm missing something BIG about Project Treble!

He didn't say that! The phone does indeed have a vendor partition, it just doesn't have the A/B scheme (that's what he said at least).
Xhah said:
I'm a little confused. How come it supports Treble if it doesn't have a separate 'vendor partition' which is supposed to bring seamless updates?
I don't think the app you're using is reliable.
Well, either that or I'm missing something BIG about Project Treble!
Click to expand...
Click to collapse

gds06 said:
will Honor 9 Lite support project treble???
Click to expand...
Click to collapse
When I do a hard reset, will project treble stay intact? I'd do a hard reset to get rid of the installed bloatware before I setup the phone.

Dio-Genes said:
When I do a hard reset, will project treble stay intact? I'd do a hard reset to get rid of the installed bloatware before I setup the phone.
Click to expand...
Click to collapse
Okay, got my device today, did a factory reset before starting. All worked fine. Yes, for sure Project Treble support, but only A-Partition. But after the reset and setup all that Bloatware was there again. Well, not to nice, but you can uninstall some of them. The device is really nice and you really get a lot of SP for the money. So, now wait for the first updates to come

?

faizk123485 said:
Is this device got project treble and support and custom rom support in future becoz i m thinking buy it or i buy xiaomi redmi note 5
Click to expand...
Click to collapse
Did you read the thread???

Dio-Genes said:
Did you read the thread???
Click to expand...
Click to collapse
Srry ?

Yesterday the first Update came in OTA. LLD-L31 8.0.0.127(C432)
Enhancement for VoLTE an VoWiFi and Security Patch for February 2018. Size: 314 MB.
Didn't install on the first time, but second time it all worked fine.
Just FYI...

Dio-Genes said:
Yesterday the first Update came in OTA. LLD-L31 8.0.0.127(C432)
Enhancement for VoLTE an VoWiFi and Security Patch for February 2018. Size: 314 MB.
Didn't install on the first time, but second time it all worked fine.
Just FYI...
Click to expand...
Click to collapse
Was this through normal phone OTA ? our some other way? Haven't got anything on same model yet in the uk.

xzyk said:
Was this through normal phone OTA ? our some other way? Haven't got anything on same model yet in the uk.
Click to expand...
Click to collapse
OTA. Checked for updates and there it was. I'm in Germany.

Dio-Genes said:
OTA. Checked for updates and there it was. I'm in Germany.
Click to expand...
Click to collapse
Thanks, just tried using VPN via Germany, but still got nothing. I have 3 huawei/honor devices and none of them have ever worked via the phone updater, always have to use FF. On the H9L however not even the stock firmware is available yet let alone any updates. Thanks for replying anyway.:good:

xzyk said:
Thanks, just tried using VPN via Germany... On the H9L however not even the stock firmware is available yet let alone any updates. Thanks for replying anyway.:good:
Click to expand...
Click to collapse
Yes, the Stock Firmware is not available yet. Hope it is coming soon. Want to try this LOS thing, I don't like the EMUI too much.
I bought my H9L on 06.02.2018 from Amazon.de, well and yesterday the update appeared. One month after purchasing. Don't know if this is important...

Dio-Genes said:
Yes, the Stock Firmware is not available yet. Hope it is coming soon. Want to try this LOS thing, I don't like the EMUI too much.
I bought my H9L on 06.02.2018 from Amazon.de, well and yesterday the update appeared. One month after purchasing. Don't know if this is important...
Click to expand...
Click to collapse
why not just install LOS ? the one for honor view 10 works without problems. running it for over a week now without issues. there cant go much wrong. i didnt backup stock before it either.
Sent from my Honor 9 Lite using XDA Labs

4RK4N said:
why not just install LOS ? the one for honor view 10 works without problems. running it for over a week now without issues. there cant go much wrong. i didnt backup stock before it either.
Click to expand...
Click to collapse
The reason i haven't done that, as i explained in the other thread, is because i need android pay, or Google pay as it's called now. I know i can pass Safetynet with some fiddling with magdisk, but as you know magdisk vs Google is a cat and mouse story, Google closes one hole resulting with magdisk failing safetynet, then magdisk updates and safetynet passes again, then Google closes that hole and so on and on. Android pay is too important for me to have to keep doing that. Without magdisk as soon as BL is unlocked, which is required for LOS, safetynet fails. If GPay wasn't so important to me i would have loaded LOS , or phh AOSP, some time ago as EMUI is just bloatware in my opinion. Why OEMs, and it's not just Honor, think their skins are better than stock is strange. If they truly believe their skin is that great then make it an apk and let users decide, don't force it down people's throat and then not even give them the option to disable it...rant over..

4RK4N said:
why not just install LOS ? the one for honor view 10 works without problems. running it for over a week now without issues. there cant go much wrong. i didnt backup stock before it either.
Click to expand...
Click to collapse
True, but even without the chance to go back to Stock if I want, is just too risky for me at the moment. Sure will try later...

Related

MIUI 9.1 Global Stable is out for Mi Mix 2! (v 9.1.1.0)

____Update 12/01____
Since a couple of days we now have v 9.1.2.0. I haven't noticed any differences yet, but the wallpaper carousel is functioning again. They also implemented fixes for problems that I personally did not encounter. ...aaand the notifications are slightly improved! Some of them evene expand and allow for direct interaction. Breathtaking development.
Get it while it's fresh on en.miui.com.
Should you not be rooted, I can recommend installing it via XiaoMiTool. I used this to flash the last MIUI 8 Global Stable, and then got 9.1.1.0 and now 9.1.2.0 via OTA. I've read that for some people here fast charging isn't working on th 9-er Firmwares. I have had no problem with that at all. Maybe it's because you guys are rooted, or because system wasn't flashed properly? I don't know, but I feel with you...
____Update 11/16____
The MIUI9 release has since been officially announced. This XDA article sheds some light on the release. However, as of today, the ROM is still not available for download on en.miui.com.
If you don't feel like waiting for OTA hitting you, shadowxaero has provided a link to download 9.1.1.0 (NDEMIEI) in post #7.
To enable VOLTE in presumably every MIUI realease, KevinLuong has shared a great link to an explanation including an easy fix in post #2.
Update 11/17
The Firmware is officially available on en.miui.com now. Should you not be rooted, consider installing it via XiaoMiTool, which will let you chose and download the Firmware within the programs flashing dialogue (give that man a beer).
_____initial post_____
..but there is no mention of it anywhere (yet). Why is that?
It's Version 9.1.1.0 (NDEMIEI). Got it OTA on Friday night, but it isn't even yet listed on the official site. Whats up with that?
Everything seems to run great, except that VOLTE can not be activated, which I find a little weird for a stable release. Oh, and notfications are still not up to scratch in MIUI 9, which is the single most annoying thing about MIUI.
Anyone else on this ROM? Maybe with tips, tricks, htoughts or insights?
.
cartonneexpress said:
...but there is no mention of it anywhere. Why is that?
It's Version 9.1.1.0 (NDEMIEI). Got it OTA on Friday night, but it isn't yet listed on the official site. Whats up with that?
Everything seems to run great, except that VOLTE can not be activated, which I find a little weird for a stable release. Oh, and notfications are still not up to scratch, which is the single most annoying thing about MIUI.
Anyone else on this ROM? Maybe with tips, tricks, htoughts or insights?
Click to expand...
Click to collapse
It's a nightly preview pushed to some users.
http://en.miui.com/thread-951467-1-1.html explains the VoLTE thing, the dialler code enabled it for me.
Sent from my Mi MIX 2 using Tapatalk
KevinLuong said:
http://en.miui.com/thread-951467-1-1.html explains the VoLTE thing, the dialler code enabled it for me.
Click to expand...
Click to collapse
Thanks a lot! That explains, and easily fixes it!
KevinLuong said:
It's a nightly preview pushed to some users.
Click to expand...
Click to collapse
Hmm. Why would they do that? I'm not even participating in the user feedback program (at least not willingly ). Usually the nightlys they push out clearly state that they are nightlys, don't they? I saw this with the Mi 6 when it got v 9.0.1.0. In this case on Mix 2 the ROM clearly states "stable" though.
Well, I don't want to complain. I feel special now. :victory:
cartonneexpress said:
...but there is no mention of it anywhere (yet). Why is that?
It's Version 9.1.1.0 (NDEMIEI). Got it OTA on Friday night, but it isn't even yet listed on the official site. Whats up with that?
Everything seems to run great, except that VOLTE can not be activated, which I find a little weird for a stable release. Oh, and notfications are still not up to scratch in MIUI 9, which is the single most annoying thing about MIUI.
Anyone else on this ROM? Maybe with tips, tricks, htoughts or insights?
Click to expand...
Click to collapse
What ROM where you on before, MIUI 8 Global Stable?
Andy4Shurr said:
What ROM where you on before, MIUI 8 Global Stable?
Click to expand...
Click to collapse
Yes, I had Global Stable (v8.5.1.0).
It's a global stable beta (stable beta = what exactly??) according to the miui forums. There was an announcement about it. I put a link to the download in the reverse engineering thread.
I haven't actually tried it yet but I would be interested to know if it passes safetynet, I guess.
http://bigota.d.miui.com/V9.1.1.0.NDEMIEI/miui_MIMIX2Global_V9.1.1.0.NDEMIEI_232bee13eb_7.1.zip
A user provided that link on the MIUI forums. I haven't flashed it yet and I believe you need to be on the MIUI8 Stable ROM in order to flash this.
duraaraa said:
It's a global stable beta (stable beta = what exactly??) according to the miui forums. There was an announcement about it. I put a link to the download in the reverse engineering thread.
I haven't actually tried it yet but I would be interested to know if it passes safetynet, I guess.
Click to expand...
Click to collapse
Lol whoops, missed this post lol. A user on MIUI also said it passed safety net yesterday.
shadowxaero said:
http://bigota.d.miui.com/V9.1.1.0.NDEMIEI/miui_MIMIX2Global_V9.1.1.0.NDEMIEI_232bee13eb_7.1.zip
A user provided that link on the MIUI forums. I haven't flashed it yet and I believe you need to be on the MIUI8 Stable ROM in order to flash this.
Lol whoops, missed this post lol. A user on MIUI also said it passed safety net yesterday.
Click to expand...
Click to collapse
You can flash it with fastboot, but you have to convert the system to a system.img in order to do so.
duraaraa said:
It's a global stable beta (stable beta = what exactly??) according to the miui forums. There was an announcement about it. I put a link to the download in the reverse engineering thread.
I haven't actually tried it yet but I would be interested to know if it passes safetynet, I guess.
Click to expand...
Click to collapse
duraaraa said:
You can flash it with fastboot, but you have to convert the system to a system.img in order to do so.
Click to expand...
Click to collapse
Lol how does one do that?
shadowxaero said:
Lol how does one do that?
Click to expand...
Click to collapse
I used sdat2img.py
https://github.com/xpirt/sdat2img
Use that to make a system.img, flash that with fastboot.
Then flash all of the other partitions with fastboot from the unpacked zip, following the pattern of the Xiaomi fastboot updates so you know which thing needs to be flashed to what.
Kind of difficult to explain and probably not worth putting together a whole tutorial, but that's how you do it.
this build passes safetynet with Magisk 14. I also installed this over Epic rom and not over v8 stable.. works fine anyways. I did format userdata and cache from fastboot before i flashed.
cartonneexpress said:
...but there is no mention of it anywhere (yet). Why is that?
Everything seems to run great, except that VOLTE can not be activated, which I find a little weird for a stable release.....
Click to expand...
Click to collapse
Try disabling VoLTE carrier check with *#*#86583*#*# That did it for me. Make sure the little pop-up screen says disabled
No notification update no fun
Jesus when will it be officially available OTA?
Removed, was already in this thread.
Full ROM Pack Version: V9.1.1.0.NDEMIEI is available now : http://en.miui.com/download-334.html#491
whats the best way to upgrade? I am on MIMIX2Global_7.11.6 beta?
el3c said:
whats the best way to upgrade? I am on MIMIX2Global_7.11.6 beta?
Click to expand...
Click to collapse
This will most likely not work coming from the developer ROM, but try the regular manual update method:
Download the ROM and copy it to your device. Then go to settings > About Phone > System Update and chose your update package from the extended menu (three dots, top right).
Should the regular method not work, and should your device not be unlocked/rooted, then simply use the XiaoMiTool. If you follow the instructions this program works really really well, so consider donating that guy a beer or two.
.
cartonneexpress said:
This will most likely not work coming from the developer ROM, but try the regular manual update method:
Download the ROM and copy it to your device. Then go to settings > About Phone > System Update and chose your update package from the extended menu (three dots, top right).
Should the regular method not work, and should your device not be unlocked/rooted, then simply use the XiaoMiTool. If you follow the instructions this program works really really well, so consider donating that guy a beer or two.
.
Click to expand...
Click to collapse
phone is unlocked... i cant live without a native adblocker ^^
Thanks...and it seems to work with the updater app it´s in German but it says: all data will be deleted and it make a revert to global stable.
i´ve canceled that, i am not sure whats better, stay on beta and get weekly updates if i want or choose global. it s a hard decission
el3c said:
phone is unlocked... i cant live without a native adblocker ^^
Thanks...and it seems to work with the updater app it´s in German but it says: all data will be deleted and it make a revert to global stable.
i´ve canceled that, i am not sure whats better, stay on beta and get weekly updates if i want or choose global. it s a hard decission
Click to expand...
Click to collapse
I'm in the same position
Hi guys,
If you installed the Official MIUI 9.1 Stable can you please report on battery life ?
Regards.

Android P Beta available for Nokia 7 Plus

Hey guys!
It seems Android P beta is available for selective models of Nokia 7 Plus.
https://developer.android.com/preview/devices/
The eligible devices list contains this phone.
I have ordered mine and will be receiving it in 2 days. Meanwhile, if anybody wants to give a try, please let us know how it is.
Cheers!!
Edit: If you are planning to upgrade to this Developer Preview 2, better download both files including the DP2 Beta and the Rollback Zip in the 1st instance. Once you have both files, proceed to upgrade. Many people are facing issues to download the rollback zip.
grubber24 said:
Hey guys!
It seems Android P beta is available for selective models of Nokia 7 Plus.
https://developer.android.com/preview/devices/
The eligible devices list contains this phone.
I have ordered mine and will be receiving it in 2 days. Meanwhile, if anybody wants to give a try, please let us know how it is.
Cheers!!
Click to expand...
Click to collapse
I was actually amazed to see Nokia 7 plus in the eligible devices. This is happening for the first time.
Here's the link to register - https://www.nokia.com/en_int/phones/developer
Sent from my Nokia 7 plus using Tapatalk
Downloading it at the moment, will post pictures soon!
Ranpe said:
Downloading it at the moment, will post pictures soon!
Click to expand...
Click to collapse
Do tell if this update will wipe the data or not and first Impressions too. I will too update then.
Sent from my Nokia 7 plus using Tapatalk
K.khiladi said:
Do tell if this update will wipe the data or not and first Impressions too. I will too update then.
Sent from my Nokia 7 plus using Tapatalk
Click to expand...
Click to collapse
It'll wipe your data, and it's installing for me right now. I'm thinking about uploading the update here but I'm unsure if it will work for others too. (as-in if it's signed for devices based on their IMEI's)
K.khiladi said:
I was actually amazed to see Nokia 7 plus in the eligible devices. This is happening for the first time.
Here's the link to register - https://www.nokia.com/en_int/phones/developer
Click to expand...
Click to collapse
Same here.. I was amazed too.. I am just worried about the roll back procedure due to the locked bootloader
Ranpe said:
It'll wipe your data, and it's installing for me right now. I'm thinking about uploading the update here but I'm unsure if it will work for others too. (as-in if it's signed for devices based on their IMEI's)
Click to expand...
Click to collapse
That's bad but nonetheless, a good news. Uploading the update here won't do anything as the device has to be enrolled into the beta programme and IMEI gets bound with the update. So, that Nokia knows which phones are on beta programme.
Do share your first Impressions after the update gets installed.
Sent from my Nokia 7 plus using Tapatalk
---------- Post added at 12:42 AM ---------- Previous post was at 12:40 AM ----------
grubber24 said:
Same here.. I was amazed too.. I am just worried about the roll back procedure due to the locked bootloader
Click to expand...
Click to collapse
I guess the rollback will work just the way beta programme works. You will have to unregister your device and an OTA would be sent to your device to get you back to stable software.
Sent from my Nokia 7 plus using Tapatalk
Installed it, and it didn't wipe my data. There's some visual bugs sometimes, but it's probably fixed by clean installing the update. I don't have time to do so at the moment, so I'm unsure of it. Otherwise, it works pretty good! Here's some screenshots: https://photos.app.goo.gl/nj9Zaw1HQWQeOe4l1
Cool! I was not happy with the wiping stuff so I didn't end up flashing it but I'll wait until more people confirm it actually works without wiping.
Ranpe said:
Installed it, and it didn't wipe my data. There's some visual bugs sometimes, but it's probably fixed by clean installing the update. I don't have time to do so at the moment, so I'm unsure of it. Otherwise, it works pretty good! Here's some screenshots: https://photos.app.goo.gl/nj9Zaw1HQWQeOe4l1
Click to expand...
Click to collapse
Can you take a screenshot of the launcher it comes with, because I'm very interested about how different it is from the Pixel Launcher?
damianiqe said:
Can you take a screenshot of the launcher it comes with, because I'm very interested about how different it is from the Pixel Launcher?
Click to expand...
Click to collapse
Nothing new, still looks the same (for me)
E: You can restore the normal navbar in the stock launcher settings (long press on empty space in home screen and press on home settings)
https://www.nokia.com/en_int/phones/developer does not let me enroll. N7 Plus TA-1046 T-Mobile Netherlands EU.
Just a warning to everyone else wanting to try this. In the Release Notes of the dev preview (https://developer.android.com/preview/release-notes) they say:
This release isn't Compatibility Test Suite (CTS) approved. Apps that depend on CTS-approved builds might not work normally on supported devices.
Click to expand...
Click to collapse
So there's a good chance that Snapchat, Netflix, Pokémon Go or several banking apps refuse to work. Also...
Devices cannot communicate with NFC readers.
Click to expand...
Click to collapse
Edit: according to the schedule on https://developer.android.com/preview/overview I'd wait for DP3 or DP4 both coming next month if you want something more like a daily driver.
gee2012 said:
https://www.nokia.com/en_int/phones/developer does not let me enroll. N7 Plus TA-1046 Netherlands EU.
Click to expand...
Click to collapse
Nokia mentions this on their website that this update can't be provided in some regions on some carriers.
Sent from my Nokia 7 plus using Tapatalk
Some pics of android p
Calls wifi gps Bluetooth are working
Even u can get old navigation style
Cam is of nokia but 2x not implemented as on p version
Others still have to test
after the update, my icons were removed the brightness is so high i set it on 25%its working good there is no always on display.
Did anyone notice the roll back build update zip? It was v2.13b 8.1.
Switching language gave me a reboot (dutch to english). After that i automatically entered recovery mode. There the phone told me to factory reset because it could not boot or retry booting again.
Retry did the job. (Thankfully..)
Sent from my Nokia 7 plus using Tapatalk
Brotuck said:
Switching language gave me a reboot (dutch to english). After that i automatically entered recovery mode. There the phone told me to factory reset because it could not boot or retry booting again.
Retry did the job. (Thankfully..)
Sent from my Nokia 7 plus using Tapatalk
Click to expand...
Click to collapse
We`re you able to enroll to P? What is your provider and did you buy your 7 Plus in the Netherlands?
awells845 said:
Did anyone notice the roll back build update zip? It was v2.13b 8.1.
Click to expand...
Click to collapse
Doing it rit now hope it get back to oreo

[App]Gcam 8.1 working

Sow post about pixel new camera, it work on our pixel 3a didnt find bug so far. To install it you need to download apkmirror instaler from playstore. The last version 8.1 worked here
NEWS story
download link
If you need any help pm me or post down. Im using november last stock rom on locked bl.
Not working same verification fail message from past versions with stock locked and unrooted Pixel 3a on November security update.
Midomad said:
Not working same verification fail message from past versions with stock locked and unrooted Pixel 3a on November security update.View attachment 5135319
Click to expand...
Click to collapse
Same here, could not install: verification fail message: rooted on november security update
Clear the local storage of the google play services and try it again, that worked for me..
mounx said:
Clear the local storage of the google play services and try it again, that worked for me..
Click to expand...
Click to collapse
Great tip ... installed! Tx
mounx said:
Clear the local storage of the google play services and try it again, that worked for me..
Click to expand...
Click to collapse
biontx said:
Great tip ... installed! Tx
Click to expand...
Click to collapse
No need , update is up on the playstore.
Are more people receiving the Google camera 8.1 update for the 3a?
It still did not appear here... (Greece)
Tomar777 said:
Are more people receiving the Google camera 8.1 update for the 3a?
It still did not appear here... (Greece)
Click to expand...
Click to collapse
I got it officially from the play store today. (US)
Tomar777 said:
Are more people receiving the Google camera 8.1 update for the 3a?
It still did not appear here... (Greece)
Click to expand...
Click to collapse
Yep got it yesterday but the only thing that has changed was the interface I was expecting the cinematic pas and portait nightsight but non of that came with the 8.1update
mamah91 said:
Yep got it yesterday but the only thing that has changed was the interface I was expecting the cinematic pas and portait nightsight but non of that came with the 8.1update
Click to expand...
Click to collapse
Yep, got it too finally, it's like you say it. I dont think we will get all the updates that newer models take, A) because of processing power maybe B) because google must sell more newer phones, so if it gives you everything on the older model, you won't buy a new one so soon.
I wish i had the 2 highlight/shadow sliders, would be very handy...

Question Owners of the Chinese version who have upgraded to the European.

Please, everyone who could upgrade your Chinese Mi 11 Ultra to global or European firmware, please describe the sequence of actions:
1) what version of phone you flashed - 8/12/256 or 12/512
2) what soft did you use to unlock bootloader
3) what version of new firmware you choosed - Global or EEA (European)
4) what mode of ref lashing did you use - "three dots" via upgrade menu (recovery) or fastboot
I think this thread will be beer useful for many of us
Thank you
i don't know of a person that has successfully done this yet.
linnil said:
i don't know of a person that has successfully done this yet.
Click to expand...
Click to collapse
there is none in the whole 52 pages topic on xiaomu.eu? Im also curious about your questions. I wanted to flash my phone in next two days after unlock bootloader.
I done it today, didnt check my version though before flashing. I updated with the OTA yesterday and flashed the latest stable 12.5. There is safetynet issue with that at the moment due to Xiaomi not certifying it but i fixed it with magisk.
Rom is much better
Guitarfreak26 said:
I done it today, didnt check my version though before flashing. I updated with the OTA yesterday and flashed the latest stable 12.5. There is safetynet issue with that at the moment due to Xiaomi not certifying it but i fixed it with magisk.
Rom is much better
Click to expand...
Click to collapse
can you link which exactly rom you flashed?
Guitarfreak26 said:
I done it today, didnt check my version though before flashing. I updated with the OTA yesterday and flashed the latest stable 12.5. There is safetynet issue with that at the moment due to Xiaomi not certifying it but i fixed it with magisk.
Rom is much better
Click to expand...
Click to collapse
What network are you on?
Guitarfreak26 said:
I done it today, didnt check my version though before flashing. I updated with the OTA yesterday and flashed the latest stable 12.5. There is safetynet issue with that at the moment due to Xiaomi not certifying it but i fixed it with magisk.
Rom is much better
Click to expand...
Click to collapse
So why exactly is it much better?
I'm on EE.
Its this one https://sourceforge.net/projects/xi...12.5.2.0.RKACNXM_v12-11-fastboot.zip/download
And its better as no Chinese text, everything working android auto etc. My news widget isn't freezing and attachments now work fine. I had issues on Chinese rom
Guitarfreak26 said:
I'm on EE.
Its this one https://sourceforge.net/projects/xi...12.5.2.0.RKACNXM_v12-11-fastboot.zip/download
And its better as no Chinese text, everything working android auto etc. My news widget isn't freezing and attachments now work fine. I had issues on Chinese rom
Click to expand...
Click to collapse
Are you getting 5g after switching?
rambo8987 said:
Are you getting 5g after switching?
Click to expand...
Click to collapse
Yeah it's working
V12.5.2.0.RKACNXM is chinese ROM, not EU or global ROM but it's good think to know than even on CN, it's possible to have multi languages and Google apps support integrated.
Guitarfreak26 said:
I'm on EE.
Its this one https://sourceforge.net/projects/xi...12.5.2.0.RKACNXM_v12-11-fastboot.zip/download
And its better as no Chinese text, everything working android auto etc. My news widget isn't freezing and attachments now work fine. I had issues on Chinese rom
Click to expand...
Click to collapse
Isn't safety net broken so Google pay and banking apps? Won't be fixed until Xiaomi does something right??
If true I'd rather stay on China ROM until that if resolved. I have no issues at all with my China ROM.
Good thread ! We need it for now.
So first version of global rom is not safe !
I was reading all that 54 pages and I noticed that you have to update your phone software via phone settings. After that it should be compatible with xiaomi Eu rom (flastboot flashing). Also don’t use that miflash...do it
Via standard command prompt method.
(The XiomiEU Rom is based on a Chinese rom but it have such a big change log is crazy ! Is polished so well that is better than global)
thats what I understood from all that pages....but again I would wait a little bit....
avetny said:
Good thread ! We need it for now.
So first version of global rom is not safe !
I was reading all that 54 pages and I noticed that you have to update your phone software via phone settings. After that it should be compatible with xiaomi Eu rom (flastboot flashing). Also don’t use that miflash...do it
Via standard command prompt method.
(The XiomiEU Rom is based on a Chinese rom but it have such a big change log is crazy ! Is polished so well that is better than global)
thats what I understood from all that pages....but again I would wait a little bit....
Click to expand...
Click to collapse
I already updated to the latest OTA; however, I am still left with a Mi 11 Ultra stuck in fastboot.
xreactx said:
I already updated to the latest OTA; however, I am still left with a Mi 11 Ultra stuck in fastboot.
Click to expand...
Click to collapse
Damn ! Did u flash ur phone via miflash ? Or via standard command prompt method?
Thanks - Great thread, had a similar idea over at Xiaomi.EU forums
Guitarfreak26 said:
I'm on EE.
Its this one https://sourceforge.net/projects/xi...12.5.2.0.RKACNXM_v12-11-fastboot.zip/download
And its better as no Chinese text, everything working android auto etc. My news widget isn't freezing and attachments now work fine. I had issues on Chinese rom
Click to expand...
Click to collapse
It's Chinese furmware, check name of file
Nuclear Blast said:
It's Chinese furmware, check name of file
Click to expand...
Click to collapse
Yeah it's xiaomi eu. It's the Chinese rom modded
s3axel said:
Thanks - Great thread, had a similar idea over at Xiaomi.EU forums
Click to expand...
Click to collapse
Hi Axel, got your pm there too. (MobileMadeSimple) I didn't do anything special. Made sure was on latest update. Unlocked bootloader. Skipped through setup etc. Went to fastboot, ran the bat as administrator.
That was it
Guitarfreak26 said:
Yeah it's xiaomi eu. It's the Chinese rom modded
Click to expand...
Click to collapse
can you also post an instruction which you used? on xioamu.eu people write different versions and I don't know if I can stick to the instructions from the first post

General Just downgraded to One UI 3.1

And everything work flawlessly compared to One Ui 4, no lags, no shutter animations, free of bugs.
Can't believe how Samsung released this new update with so much bugs.
i9apps said:
And everything work flawlessly compared to One Ui 4, no lags, no shutter animations, free of bugs.
Can't believe how Samsung released this new update with so much bugs.
Click to expand...
Click to collapse
Yea this is true I even got the 2nd Android 12 update it's a bit faster but still nowhere near 3.0
i9apps said:
And everything work flawlessly compared to One Ui 4, no lags, no shutter animations, free of bugs.
Can't believe how Samsung released this new update with so much bugs.
Click to expand...
Click to collapse
I agree. Would you please give me instruction to how to downgrade firmware?
GoldPunch said:
I agree. Would you please give me instruction to how to downgrade firmware?
Click to expand...
Click to collapse
the instuctions:
remember : ( FOR ME ) flash one ui 3.1 over 4.0 select home csc failed via odin.
try again with csc nit home csc successfully but wiping data .
To get into bootloader mode just power down, wait about 5-10 seconds, press volume up and down and connect to (the in the PC) usb cable and you`re done. Just a tip.
i9apps said:
the instuctions:
Click to expand...
Click to collapse
Thank you very much. I will wait one more update, if it wont fix then I'll try this.
You say 12 is full of bugs, I haven't experienced anything since the beta's and am getting incredible SOT time
The Raveonettes - You say you lie
i9apps said:
And everything work flawlessly compared to One Ui 4, no lags, no shutter animations, free of bugs.
Can't believe how Samsung released this new update with so much bugs.
Click to expand...
Click to collapse
They really dropped the ball and I'm gonna have to do the same if the patch isn't out soon. Any advice for a newbie? Main question I have is will I need to dump my data back onto the phone after this? Or do I have the option to preserve my data on the device itself so I don't have to dump from backup? Of course, I'm going do a backup the device just in case. I really just want to know what I'm about to dive into.
DS1000RR said:
You say 12 is full of bugs, I haven't experienced anything since the beta's and am getting incredible SOT time
Click to expand...
Click to collapse
Depends on your carrier. Verizon and T-Mobile already got their patches rolled out. AT&T, and unlocked phones have not.
To downgrade what firmware should I download...I m a bit confused. I m in Usa and have an unlocked version. From sammobile website it has att, tmo, verizon etc but i dont see the unlocked? Couple other options say TMK and USC...no idea what those mean. Any Ideas?
EDIT: NVM figured it out. There is a thread on here with U1 firmware which is for unlocked variant. However Home CSC gave me an error and phone wouldnt boot. But there was an option for factory reset, did that and booted fine.
Quick question, updated to 12. Not happy with the lag and other aspects. If I backup my phone with smart switch and then try to revert to 11, can I restore my data?
singhsta said:
To downgrade what firmware should I download...I m a bit confused. I m in Usa and have an unlocked version. From sammobile website it has att, tmo, verizon etc but i dont see the unlocked? Couple other options say TMK and USC...no idea what those mean. Any Ideas?
EDIT: NVM figured it out. There is a thread on here with U1 firmware which is for unlocked variant. However Home CSC gave me an error and phone wouldnt boot. But there was an option for factory reset, did that and booted fine.
Click to expand...
Click to collapse
Could you get me a link to that? I have the US unlocked variant as well. Could really use the help.
Great news, also just as important I changed my phone wallpaper and may consider using Google Messages for a bit.
You guys tried the BUKG? it's working flawlessly for me. No stuttering animations, lovely colors customization, frame drop has been fixed, no battery drain
New update is BUL1 with detcember patch.
olafsand said:
New update is BUL1 with detcember patch.
Click to expand...
Click to collapse
Still buggy as hell. Downgraded again.
I am considering to Downgrade also,
just can't stand the fact that a basic functionality like Google Play Store is not working correctly,
I've applied the December Patch pushed by Samsung, would i be able to downgrade (Clean) to Android 11 with the ODIN method? it is mentioned that uses who applied the latest security Patch may fail to downgrade.
I have the latest BUL1 Release, and Model SM-G998B
kaplaey2 said:
I am considering to Downgrade also,
just can't stand the fact that a basic functionality like Google Play Store is not working correctly,
I've applied the December Patch pushed by Samsung, would i be able to downgrade (Clean) to Android 11 with the ODIN method? it is mentioned that uses who applied the latest security Patch may fail to downgrade.
I have the latest BUL1 Release, and Model SM-G998B
Click to expand...
Click to collapse
Yes, you will be able to downgrade. just did it myself.

Categories

Resources