Has anyone tried V4A on the Xiaomi Mi Max 2? What are your settings or presets for the phone speakers or wired headsets?
I have tried it with a few different impulse response files to try and improve the sound of both my phone speakers and my headphones. For the speakers: I have noticed an major improvement in the loudness when the volume is at 0- 50%, but at 100% volume, there is minimal difference between the with and without V4A, it fact the clarity is much better without V4A. Is this normal for you guys?
FangXIII said:
Has anyone tried V4A on the Xiaomi Mi Max 2? What are your settings or presets for the phone speakers or wired headsets?
I have tried it with a few different impulse response files to try and improve the sound of both my phone speakers and my headphones. For the speakers: I have noticed an major improvement in the loudness when the volume is at 0- 50%, but at 100% volume, there is minimal difference between the with and without V4A, it fact the clarity is much better without V4A. Is this normal for you guys?[/QUOT
Not in my case thou
Click to expand...
Click to collapse
Is it possible if you could share your setup?
Ashutosh4555 said:
FangXIII said:
Has anyone tried V4A on the Xiaomi Mi Max 2? What are your settings or presets for the phone speakers or wired headsets?
I have tried it with a few different impulse response files to try and improve the sound of both my phone speakers and my headphones. For the speakers: I have noticed an major improvement in the loudness when the volume is at 0- 50%, but at 100% volume, there is minimal difference between the with and without V4A, it fact the clarity is much better without V4A. Is this normal for you guys?[/QUOT
Not in my case thou
Click to expand...
Click to collapse
Is it possible if you could share your preset/settings?
Click to expand...
Click to collapse
Here
Ashutosh4555 said:
Here
Click to expand...
Click to collapse
How did you install viper4android and which exact version? I am asking because I had many problems installing it lately.
Kantastisch said:
How did you install viper4android and which exact version? I am asking because I had many problems installing it lately.
Click to expand...
Click to collapse
Depending on your version, could be that some will work and some not. if you are on Miui, just go and search for Divine Beats, the latest version, and flash it via TWRP. No need for wipe.
Kantastisch said:
How did you install viper4android and which exact version? I am asking because I had many problems installing it lately.
Click to expand...
Click to collapse
if you are using magisk for root, then try Viper4Android magisk module.
ekin_strops said:
Depending on your version, could be that some will work and some not. if you are on Miui, just go and search for Divine Beats, the latest version, and flash it via TWRP. No need for wipe.
Click to expand...
Click to collapse
No magisk and lineage 14.1
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
reversegear said:
if you are using magisk for root, then try Viper4Android magisk module.
Click to expand...
Click to collapse
No magisk and lineage 14.1
ekin_strops said:
Depending on your version, could be that some will work and some not. if you are on Miui, just go and search for Divine Beats, the latest version, and flash it via TWRP. No need for wipe.
Click to expand...
Click to collapse
I don't understand this. Somebody help. I just got my mi max 2 with China Rom pre-installed and rooted it by unlocking bootloader and flashing twrp. Now my phone is rooted. On my search for installing Viper4android I came across this thread.
Can someone explain step by step on how I can install viper4android on my phone using this particular idea (divine beats flashing coz I don't understand how to search for it).
Hoping to learn more on this forum.
Thanks
Telegram
this is a official telegram link for viper4arise (a.k.a viper4android) https://t.me/joinchat/AAAAAEItMnhsCBOoelTXMw
Related
Hi Guys,
I have taken the liberty to post Dolby Atmos ported from LeEco Le pro 3 so it can be used for our custom rom’s.
I have tested and working ( including dirty flash over Le Max 2)
Big thanks to original owner @ahrion
dax_lepro3
Collective Dolby Atmos Port Thread
It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.
ahrion said:
It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.
Click to expand...
Click to collapse
Thanks bro. This is an awesome work.
I will have it linked when you upload the stable version.
saraprobe said:
Thanks bro. This is an awesome work.
I will have it linked when you upload the stable version.
Click to expand...
Click to collapse
Link my thread.
ahrion said:
It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.
Click to expand...
Click to collapse
By the way what does deep buffer do?
saraprobe said:
By the way what does deep buffer do?
Click to expand...
Click to collapse
On some ROMs/devices streaming + V4A or Dolby does not work. It appears to be working but you can't hear the difference, flashing the deep_buffer fix deletes audio_policy.conf lines. On some devices this could cause a bootloop. If you don't have that problem, there's no need to flash.
ahrion said:
On some ROMs/devices streaming + V4A or Dolby does not work. It appears to be working but you can't hear the difference, flashing the deep_buffer fix deletes audio_policy.conf lines. On some devices this could cause a bootloop. If you don't have that problem, there's no need to flash.
Click to expand...
Click to collapse
One thing i have noticed with Lemax 2 port was volume tend to fluctuate in when its low. has anyone reported this?
saraprobe said:
One thing i have noticed with Lemax 2 port was volume tend to fluctuate in when its low. has anyone reported this?
Click to expand...
Click to collapse
I would assume this varies by device. However I wouldn't differentiate it with the one that comes with your stock rom. I include a modified version of the dax_default.xml in which I remove the volume heightening restriction and turn on audio regulation/modifications.
ETA: This allows your audio to reach higher highs, lower lows, and more consistent mids. Rather than a locked sound. Turn the left EQ bar all the way up and use V4A and you'll hear your bass thump without being too overbearing.
ahrion said:
I would assume this varies by device. However I wouldn't differentiate it with the one that comes with your stock rom. I include a modified version of the dax_default.xml in which I remove the volume heightening restriction and turn on audio regulation/modifications.
ETA: This allows your audio to reach higher highs, lower lows, and more consistent mids. Rather than a locked sound. Turn the left EQ bar all the way up and use V4A and you'll hear your bass thump without being too overbearing.
Click to expand...
Click to collapse
I noticed stock was locked in Leeco lepro 3
saraprobe said:
I noticed stock was locked in Leeco lepro 3
Click to expand...
Click to collapse
Right. I removed that restriction.
ahrion said:
Right. I removed that restriction.
Click to expand...
Click to collapse
Which one? old upload or new one coming up?
saraprobe said:
Which one? old upload or new one coming up?
Click to expand...
Click to collapse
I removed it in all the Dolby Atmos I've ported.
ahrion said:
I removed it in all the Dolby Atmos I've ported.
Click to expand...
Click to collapse
cool no worries
Hi @ahrion i tried to flash yours over stock rom which has Dolby but i am getting FC.
Can i manually place files or is anything i can do to get it going?
saraprobe said:
Hi Guys,
I have taken the liberty to post Dolby Atmos ported from LeEco Le pro 3 so it can be used for our custom rom’s.
I have tested and working ( including dirty flash over Le Max 2)
Big thanks to original owner @ahrion
dax_lepro3
Collective Dolby Atmos Port Thread
Click to expand...
Click to collapse
It its work on miui rom?
jimbo1212 said:
It its work on miui rom?
Click to expand...
Click to collapse
Try with magisk
Ok i will try it
hi
i try with cydras 20s :sound good (music,film...).but i lost sound in phone :/
coke15 said:
hi
i try with cydras 20s :sound good (music,film...).but i lost sound in phone :/
Click to expand...
Click to collapse
Uninstall or disable Audio FX, then reboot...
Hi. Thanks but i can't find audio fx? No audio fx on apps,neither with titanium?
Where is it hiden?
Hi guys,
Im listening to a lot of music with my phone and thats why im looking for the audio experience i can get.
Im currently on rooted Stock OOS 4.0.3 and flashed Viper 2.5.0.5
Im using Xiaomi Pro HD (http://www.mi.com/en/headphonesprohd/) which are their newest in ear headphones and have some experience with using viper.
Although effects get boosted quite a bit, i feel like the sound could be clearer and more powerfull. Im trying a lot of settings and IRS for month now, but i never got to a very good result.
Am i just limited by Phone and headphones or is there still some improvement possible with software? Are there any specific settings for my headphones like IRS or Viper-DDC because i never found some. Im ok with settings for equal sounding headphones
Did you only flash viper or did you flash an edition of arise?
Otherwise i would suggest to try the latest Arise Swansong! It will take some time because the possibilities are endless but it's the best I've ever had..
Sent from my Slim OnePlus3-T using XDA-Developers Legacy app
Pollie81 said:
Did you only flash viper or did you flash an edition of arise?
Otherwise i would suggest to try the latest Arise Swansong! It will take some time because the possibilities are endless but it's the I've ever had..
Sent from my Slim OnePlus3-T using XDA-Developers Legacy app
Click to expand...
Click to collapse
Can you please post the zip file which you are talking about ? and also is this arise working well on 4.0.3 oxos ?
I don't know, it should be as freedom OS has it included.
For arise itself, just search arise xda in Google and you'll find the thread with the files and all needed information and support.
I only flashed the viper4android.zio 2.5.0.5 according to this guide: http://www.theandroidsoul.com/install-viper4android-nougat/
Unfortunally the biggest problem i have is that there is always a disturbance noise in the background, i heard that this is only the problem with the version i am using, so im looking to flash an older one
This works very good on 4.0.3 OOS..
Simply flash on recovery..
cultofluna said:
This works very good on 4.0.3 OOS..
Simply flash on recovery..
Click to expand...
Click to collapse
can we flash it on stock recovery?
alexdonwarez said:
can we flash it on stock recovery?
Click to expand...
Click to collapse
No .... you need twrp...
Don't install this old arise version, it's outdated and the newer one are a big step forward.
Try this:
latest Arise Version (newest with aroma: https://www.androidfilehost.com/?fid=457095661767141554)
v4a 2.5.0.5
Arkamys
ICE with config 3 and PURE preset
Toolbox
phoberus said:
Don't install this old arise version, it's outdated and the newer one are a big step forward.
Try this:
latest Arise Version (newest with aroma: https://www.androidfilehost.com/?fid=457095661767141554)
v4a 2.5.0.5
Arkamys
ICE with config 3 and PURE preset
Toolbox
Click to expand...
Click to collapse
Don't you need selinux permissive for A.R.I.S.E to work ?
hanut1 said:
Don't you need selinux permissive for A.R.I.S.E to work ?
Click to expand...
Click to collapse
No, only for atmos and DDP.
I'm using now only ARISE core (newest version)
If you have magisk, you need to flash the module also
phoberus said:
No, only for atmos and DDP.
I'm using now only ARISE core (newest version)
If you have magisk, you need to flash the module also
Click to expand...
Click to collapse
Ya I flashed the module and a busybox still driver status showing unsupported haven't flashed atmos or dds, guess its rom related will try on OOS beta 6 .
LazerH said:
Hi guys,
Im listening to a lot of music with my phone and thats why im looking for the audio experience i can get.
Im currently on rooted Stock OOS 4.0.3 and flashed Viper 2.5.0.5
Im using Xiaomi Pro HD (http://www.mi.com/en/headphonesprohd/) which are their newest in ear headphones and have some experience with using viper.
Although effects get boosted quite a bit, i feel like the sound could be clearer and more powerfull. Im trying a lot of settings and IRS for month now, but i never got to a very good result.
Am i just limited by Phone and headphones or is there still some improvement possible with software? Are there any specific settings for my headphones like IRS or Viper-DDC because i never found some. Im ok with settings for equal sounding headphones
Click to expand...
Click to collapse
hanut1 said:
Ya I flashed the module and a busybox still driver status showing unsupported haven't flashed atmos or dds, guess its rom related will try on OOS beta 6 .
Click to expand...
Click to collapse
Check out this thread, to get Viper working properly - no background noise for me on Bluetooth or Wired and works with all streaming apps, with selinux enforced: https://forum.xda-developers.com/showpost.php?p=72176614&postcount=2
manor7777 said:
Check out this thread, to get Viper working properly - no background noise for me on Bluetooth or Wired and works with all streaming apps, with selinux enforced: https://forum.xda-developers.com/showpost.php?p=72176614&postcount=2
Click to expand...
Click to collapse
not needed for arise dude
hanut1 said:
Ya I flashed the module and a busybox still driver status showing unsupported haven't flashed atmos or dds, guess its rom related will try on OOS beta 6 .
Click to expand...
Click to collapse
Is busybox activated in magisk settings?
phoberus said:
not needed for arise dude
Is busybox activated in magisk settings?
Click to expand...
Click to collapse
Ya I forgot about that , did that now still not working
hanut1 said:
Ya I flashed the module and a busybox still driver status showing unsupported haven't flashed atmos or dds, guess its rom related will try on OOS beta 6 .
Click to expand...
Click to collapse
manor7777 said:
Check out this thread, to get Viper working properly - no background noise for me on Bluetooth or Wired and works with all streaming apps, with selinux enforced: https://forum.xda-developers.com/showpost.php?p=72176614&postcount=2
Click to expand...
Click to collapse
hanut1 said:
Ya I forgot about that , did that now still not working
Click to expand...
Click to collapse
I'm using freedomOS, working there
phoberus said:
I'm using freedomOS, working there
Click to expand...
Click to collapse
Yes I just flashed that thanks
This is the best one I have came across and Sauron update is amazing!
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
phoberus said:
I'm using freedomOS, working there
Click to expand...
Click to collapse
FreedomOS has ARISE cooked in, so I would hope it works!
I only flashed ARISE AROMA installer (not Magisk) on the stock ROM (with root) without having to monkey around with SELinux permissive or Busybox, and it works perfectly.
How to remove ARISE?
Hello!
I truly love music so I want the best quality ever! ARISE seems to have differents effects depending on the phone you're using so I'd like to know: for you what is the best ARISE config for OP5?
Thanks a lot!
Hate to say it, but what works for one person will probably sound like crap to you. Aside from different headphones, we all perceive sound differently and have different tastes in what sounds good
Sent from my ONEPLUS A5000 using Tapatalk
Thanks for your answer, Arise is such a big mod that I don't know where to start, especially with ICESound mod! But I will test
Believe it or not, the stock Dirac Sound thing is the best for OOS IMO.
I've tried ARISE with many different settings. My preference is stock without ARISE.
Here is my setting, you can try it
Viper DDC : AKG 501
Firequlaizer : acustic
Field surround : 4-5
Headphone surround : level 1
Viper bass : natural 50-6
Viper clarity : natural default
Thanks everyone for your answers! I'm actually testing Dirac
I like paschfirefx ground zero most on my op3.
furious.builder said:
Thanks everyone for your answers! I'm actually testing Dirac
Click to expand...
Click to collapse
what's Dirac?
gonsa said:
what's Dirac?
Click to expand...
Click to collapse
It's an audio mod, it's available inside Arise
I prefer
arise + Icesound pure present
that all. and leave viper default setting
furious.builder said:
It's an audio mod, it's available inside Arise
Click to expand...
Click to collapse
Where is it?
I flashed this mod https://forum.xda-developers.com/showpost.php?p=72972799&postcount=4 but it isn't there.
gonsa said:
Where is it?
I flashed this mod https://forum.xda-developers.com/showpost.php?p=72972799&postcount=4 but it isn't there.
Click to expand...
Click to collapse
If you correctly configured arise-configuration.prop, it has been installed. It doesn't have a config app, it's more like an "install and forget" mod
Just installed viper 4 arise and it is not processing,any solution?
What do you have installed in addition of Viper ? Dolby Atmos ?
NekroLime said:
Just installed viper 4 arise and it is not processing,any solution?
Click to expand...
Click to collapse
Inside v4a go to settings, enable Dev mode, disable se Linux
8hodgsonkh said:
Inside v4a go to settings, enable Dev mode, disable se Linux
Click to expand...
Click to collapse
Followed the steps and the problem still there
NekroLime said:
Followed the steps and the problem still there
Click to expand...
Click to collapse
Toggle viper off and on after you disable se Linux and it should start working
8hodgsonkh said:
Toggle viper off and on after you disable se Linux and it should start working
Click to expand...
Click to collapse
Alright,thanks for your reply, problem fixed,it was caused by the icesound thinggy
NekroLime said:
Alright,thanks for your reply, problem fixed,it was caused by the icesound thinggy
Click to expand...
Click to collapse
Glad to hear you got it working
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
Flash the attached Magisk module (v4afx_v1.7.3.zip) through Magisk Manager and press volume up button twice.
After that reboot your device and enter the Viper4Android app.
Next, you need to set up the sound mod.
*I only use Viper4Android for my headphones so I will cover only that part but you could test out different settings for other audio outputs*
In the Viper4Android's menu go to UI setting and set it to expert.
Go to Headset and click Enable, I suggest you put on your headphones now so you can hear the changes in the sounds yourself and tweak them to your liking.
My settings on Redmi Note 5 Pro are:
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE 2.zip into Viper4Android/Kernel); Cross Channel: 30%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
pavaosk said:
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Arise. Simple to use, great sound quality and a lot of customization.
There are many Arise editions but I find the attached one simplest to use.
Steps:
1. Flash the attached file (ARISE Sound Systems Deuteronomy 2.2.3 Mac 'n Cheese Edition FINAL) through TWRP
2. Reboot to OS
3. Install Busybox (https://play.google.com/store/apps/details?id=ru.meefik.busybox) from Play Store
4. Open the Busybox app and install busybox
5. Enter the Viper4Arise app
Done!
Next, you need to set up the sound mod.
*I only use Viper4Arise for my headphones so I will cover only that part but you could test out different settings for other audio outputs*
In the Viper4Arise's menu go to UI setting and set it to expert.
Go to Headset and click Enable, I suggest you put on your headphones now so you can hear the changes in the sounds yourself and tweak them to your liking.
My settings on Redmi 4X are:
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE 2.rar into Viper4Android/Kernel); Cross Channel: 30%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
Click to expand...
Click to collapse
It is telling me that I have a bad BusyBox....
I installed stericson BusyBox as they said.
Some help?
Incomtus said:
It is telling me that I have a bad BusyBox....
I installed stericson BusyBox as they said.
Some help?
Click to expand...
Click to collapse
Which rom?
pavaosk said:
Which rom?
Click to expand...
Click to collapse
ViperOs bro
Incomtus said:
ViperOs bro
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=stericson.busybox Try reinstalling busybox with this app.
pavaosk said:
https://play.google.com/store/apps/details?id=stericson.busybox Try reinstalling busybox with this app.
Click to expand...
Click to collapse
Already done! Lol
Incomtus said:
Already done! Lol
Click to expand...
Click to collapse
Have you tried installing the Viper4Andoid FX module through Magisk?
pavaosk said:
Have you tried installing the Viper4Andoid FX module through Magisk?
Click to expand...
Click to collapse
No i didn't,
i try now
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
There are 3 different modules which do you suggest?
Incomtus said:
No i didn't,
i try now
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
There are 3 different modules which do you suggest?
Click to expand...
Click to collapse
First one, that says only Viper4Android FX and in description says v2.2 2.5.0.5
OK i tried to install the Viper4Andoid with magisk and now i have 2 versions installed and the one installed with magisk is just craching
---------- Post added at 10:38 PM ---------- Previous post was at 10:04 PM ----------
How can i unistall the first Viper4Andoid you gave? Lol i think i give up
Ok i ve got it! I uninstalled the viper4arise you join here on the link and i installed tge one with magisk and it is ****in AMAZING i live the Convolver!! Bbe just great wonderful dor a musician like me
Incomtus said:
Ok i ve got it! I uninstalled the viper4arise you join here on the link and i installed tge one with magisk and it is ****in AMAZING i live the Convolver!! Bbe just great wonderful dor a musician like me
Click to expand...
Click to collapse
I'm glad I've helped
pls answer ...
When I try to use on MIUI 9 Global ROM ?? it's will works ???
k3rzZ said:
When I try to use on MIUI 9 Global ROM ?? it's will works ???
Click to expand...
Click to collapse
I believe it should work. You can try it yourself.
Good Job
Now I'm enjoying it even more ! thanks buddy :good::fingers-crossed:
mr Pavaosk, Sir, will it(viper4android) works on redmi 4x with base rom Mui(which is already unblock loader and rooted(magisk or super su) )? or should i flash it in the custom rom?
thank you.
bee21 said:
mr Pavaosk, Sir, will it(viper4android) works on redmi 4x with base rom Mui(which is already unblock loader and rooted(magisk or super su) )? or should i flash it in the custom rom?
thank you.
Click to expand...
Click to collapse
You can try it on MIUI I believe it should work, but even if it doesn't it won't break anything so be free to try it.
pavaosk said:
Help me please (I put this in...LOL)...
Click to expand...
Click to collapse
Hi, been trying dozens of Viper. Installs, but driver still Enabled=No. Have Viper on my rooted S5 for almost 4 years. Love it. I got a "new" 935-F using Superman Rom v2.8 7.0 with permissive Superstock Kernel. I tried your method and always wind up with the same Enabled=No on the driver.
Can you suggest something or an alternative if you get a chance?
Thanks in advance!
samccfl99 said:
Hi, been trying dozens of Viper. Installs, but driver still Enabled=No. Have Viper on my rooted S5 for almost 4 years. Love it. I got a "new" 935-F using Superman Rom v2.8 7.0 with permissive Superstock Kernel. I tried your method and always wind up with the same Enabled=No on the driver.
Can you suggest something or an alternative if you get a chance?
Thanks in advance!
Click to expand...
Click to collapse
You can try flashing these two files : http://forum.xda-developers.com/showthread.php?p=69618189
bbe.rar bad file,error while extracting pls help
Hi!
After many try and fails I found a working version of Dolby Atmos for the new 8.1 Oreo Roms like AOSP Extented, crDroid, Cardinal Aosp etc.
https://androidfilehost.com/?fid=962187416754473447
Flash through TWRP, clear Dalvik and Cache, reboot.
If you have viber installed, use this flash tool to delete viber
https://drive.google.com/file/d/1g_9Vvykbb5fCxL9vjM8wOi9-wmbvraBy/view
And use the app Selinux mode changer from store and change to permissive.
This Dolby Atmos version.works together with Viber4android.
Install the same versions of viber and than aml through magisk manager what you see on the screen shot
Instal all the steps from viber with volume up!
For newer versions of Magisk (16.6) you need a newer version of Dolby Atmos.
Dolby-Atmos_Axon7_Oreo_BnC_Edition_5.30.18.zip
Here you go:
https://androidfilehost.com/?w=files&flid=247761
Im in CrDroid and don't works this zip
Sent from my LEX727 using Tapatalk
GilbertoXDA17 said:
Im in CrDroid and don't works this zip
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
I tested it on crDroid and it works perfect.
Did you change selinux to permissive and disabled the sound app what comes with the rom?
Oel said:
I tested it on crDroid and it works perfect.
Did you change selinux to permissive?
Click to expand...
Click to collapse
Damn it, I forget it, do you have the selinux app?
Sent from my LEX727 using Tapatalk
GilbertoXDA17 said:
Damn it, I forget it, do you have the selinux app?
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
Yes
Nope still not working
Sent from my LEX727 using Tapatalk
GilbertoXDA17 said:
Nope still not working
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
Black screen 4.9?
No other sound mod?
Does it work with the stock LeEco CDLA earphones?
Oel said:
Black screen 4.9?
No other sound mod?
Click to expand...
Click to collapse
I have blackscreen
Sent from my LEX727 using Tapatalk
insomnixXx said:
Does it work with the stock LeEco CDLA earphones?
Click to expand...
Click to collapse
I don't have the cdla earphones, so check it out!
#Oel Do we need to keep sellinux permissive all the time or just set it before flashing Dolby and after system boots up revert to enforced?
Trimis de pe al meu LEX722 folosind Tapatalk
Alexandrutm said:
#Oel Do we need to keep sellinux permissive all the time or just set it before flashing Dolby and after system boots up revert to enforced?
Trimis de pe al meu LEX722 folosind Tapatalk
Click to expand...
Click to collapse
No, it's ok before flashing and after go back to enforced.
This Dolby Atmos version.works together with Viber4android.
Install the same versions of viber and than aml what you see on the screen shot
Instal all the steps from viber with volume up!
Oel said:
Hi!
After many try and fails I found a working version of Dolby Atmos for the new 8.1 Oreo Roms like AOSP Extented, crDroid, Cardinal Aosp etc.
https://androidfilehost.com/?fid=962187416754473447
Flash through TWRP, clear Dalvik and Cache, reboot.
If you have viber installed, use this flash tool to delete viber
https://drive.google.com/file/d/1g_9Vvykbb5fCxL9vjM8wOi9-wmbvraBy/view
And use the app Selinux mode changer from store and change to permissive.
This Dolby Atmos version.works together with Viber4android.
Install the same versions of viber and than aml through magisk manager what you see on the screen shot
Instal all the steps from viber with volume up!
Click to expand...
Click to collapse
I can confirm that this works on recent builds of AICP and AEX. The exception is that I have both the Viper Black and Cheese version :
ViPER4Android_2505_Black_n_Cheese_Edition_Unity_20180325 and DolbyAtmos_Axon7_Oreo_Unity_4.6.2018-2.zip
No issues sounds excellent!
https://drive.google.com/open?id=1KtNtBOw1Hj7Rw4OVT2wWdE1ujDAZgo9x
---------- Post added at 11:24 PM ---------- Previous post was at 11:21 PM ----------
Oel said:
I don't have the cdla earphones, so check it out!
Click to expand...
Click to collapse
Yes, it works with CDLA
---------- Post added at 11:24 PM ---------- Previous post was at 11:21 PM ----------
[/COLOR]
Yes, it works with CDLA[/QUOTE]
Sorry, but not for me.
Lethalben said:
---------- Post added at 11:24 PM ---------- Previous post was at 11:21 PM ----------
[/COLOR]
Yes, it works with CDLA
Click to expand...
Click to collapse
Sorry, but not for me.[/QUOTE]
It works for almost everyone else. Rather than just saying it doesn't work for you, if you actually want to get it working, provide more info.
Which phone do you have, what mods are you using?
What Rom ( version date) are you using, which kernel, firmware, etc.
Does CDLA work for anything else? Do you have a second pair of CDLA headphones to try?
tsongming said:
Sorry, but not for me.
Click to expand...
Click to collapse
It works for almost everyone else. Rather than just saying it doesn't work for you, if you actually want to get it working, provide more info.
Which phone do you have, what mods are you using?
What Rom ( version date) are you using, which kernel, firmware, etc.
Does CDLA work for anything else? Do you have a second pair of CDLA headphones to try?[/QUOTE]
For more précision : dolby atmos doesn't works only with my leeco cdla earphones ! With cdla adaptator and and earphones it's OK !
And it's not a problem for me !
But when I read the first post of this topic, I'm saying, cool this time it's for me.
Thanks for all !
May be another time
Lethalben said:
It works for almost everyone else. Rather than just saying it doesn't work for you, if you actually want to get it working, provide more info.
Which phone do you have, what mods are you using?
What Rom ( version date) are you using, which kernel, firmware, etc.
Does CDLA work for anything else? Do you have a second pair of CDLA headphones to try?
Click to expand...
Click to collapse
For more précision : dolby atmos doesn't works only with my leeco cdla earphones ! With cdla adaptator and and earphones it's OK !
And it's not a problem for me !
But when I read the first post of this topic, I'm saying, cool this time it's for me.
Thanks for all !
May be another time[/QUOTE]
So it seems that the DAC converter in your headphones is bad.
Sent from my LEX727 using XDA Labs
I did the steps (used tsongming's and Oel's files) mentioned here and while Dolby works on speaker and any earphone with the 3.5mm adapter, when I use it with my CDLA earphones the sounds remains unchanged and when I checked it by flashing Paranoid Android with Dolby Atmos magisk module it worked on every earphone. What am I doing wrong?
Firmware 20s X727, default kernel, ROM: crdroid (latest version), using SELinux permissive.
horvman said:
I did the steps (used tsongming's and Oel's files) mentioned here and while Dolby works on speaker and any earphone with the 3.5mm adapter, when I use it with my CDLA earphones the sounds remains unchanged and when I checked it by flashing Paranoid Android with Dolby Atmos magisk module it worked on every earphone. What am I doing wrong?
Firmware 20s X727, default kernel, ROM: crdroid (latest version), using SELinux permissive.
Click to expand...
Click to collapse
First, be in Permissive mode while flashing these audio mods.
Flash Dolby and the Audio Modification Library.
Boot to system to confirm that Dolby is installed.
Add Black and Cheese Mod, through Magisk.
Use root privileged file manager and go the the sd card.
Look for a file called ariseparameters.prop open it as a text file and locate where it says " install.add.libraries"
Add =true it should read:
PHP:
install.add.libraries=true
Click save.
Add Black and Cheese Mod, through Magisk. ..Again, it will uninstall
Reboot to Recovery , flash: Black and Cheese Mod - Now it will be installed with the effects libraries now permanent because of the prop file change
Reboot to system
Now in viper you should no have the additional sound effects and presets.
Be sure to complete setup as previously advised by going into Viper settings, change "FX compatible mode" to compatible.
Select "Lock effect mode" and choose headset
Everything should now work.
Edit to add link to files that this post is referencing: https://forum.xda-developers.com/showpost.php?p=76341567&postcount=13
I am using a different method:
First flash Dolby Atmos and Audi Modifivation Library.
Boot into system and check the functionality from Dolby.
Than go into Magiskmanager an search in Downloads for Viber 1.6.5.
Install it with volume button up .
Reboot and check.
Now i flashed cDroid and installed sucsessfully Dolby Atmos and Viber. G5