my honor 4x che1-l04 syddenly stop working when i press the power button it shows honor logo and went off also i never flash any custom recovery also only acessable option is fastboot&rescue mode
my boot loader is locked but i managed to get boot loader key from honor care
after that i unlock boot loader and flash the phone from fastboot mode but it didnt work at all
all files mean recovery,boot,system.img flashed properly no issue but it didnt worked
last version of my phone is marshmallow build no is Che1-L04C675B520
please help me
gilmaan azmi said:
my honor 4x che1-l04 syddenly stop working when i press the power button it shows honor logo and went off also i never flash any custom recovery also only acessable option is fastboot&rescue mode
my boot loader is locked but i managed to get boot loader key from honor care
after that i unlock boot loader and flash the phone from fastboot mode but it didnt work at all
all files mean recovery,boot,system.img flashed properly no issue but it didnt worked
last version of my phone is marshmallow build no is Che1-L04C675B520
please help me
Click to expand...
Click to collapse
Do you have the marshmallow update pacakage(one you downloaded to update the phone to marshmallow) if you have then extract it and place the dload folder inside a memory card and place it in your phone, then while switched off press power+volume up+volume down all at once and wait until your phone vibrates then leave the buttons and let the software do the work. Hope it helps:good:
SumitGupta2442 said:
Do you have the marshmallow update pacakage(one you downloaded to update the phone to marshmallow) if you have then extract it and place the dload folder inside a memory card and place it in your phone, then while switched off press power+volume up+volume down all at once and wait until your phone vibrates then leave the buttons and let the software do the work. Hope it helps:good:
Click to expand...
Click to collapse
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site
gilmaan azmi said:
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site
Click to expand...
Click to collapse
Download it from here http://download-c.huawei.com/download/downloadCenter?downloadId=53693&version=167605&siteCode=in. Btw I have no idea what dc phoenix is.
gilmaan azmi said:
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site
Click to expand...
Click to collapse
If you have unlocked bootloader just flash twrp version for your device and download any MM version Fullrom.zip using firmware finder and flash it through twrp.
Before flashing new rom wipe all partitions from twrp.
miststudent2011 said:
If you have unlocked bootloader just flash twrp version for your device and download any MM version Fullrom.zip using firmware finder and flash it through twrp.
Before flashing new rom wipe all partitions from twrp.
Click to expand...
Click to collapse
i unlocked the boot loader also flashed the twrp recovery
but its not booting in twrp recovery both by power button + volume up and through fastboot command
gilmaan azmi said:
i unlocked the boot loader also flashed the twrp recovery
but its not booting in twrp recovery both by power button + volume up and through fastboot command
Click to expand...
Click to collapse
May be you are using wrong version twrp.
miststudent2011 said:
May be you are using wrong version twrp.
Click to expand...
Click to collapse
i am using TWRP_3.0.3-0_N_cherry its for honor 4x
gilmaan azmi said:
i am using TWRP_3.0.3-0_N_cherry its for honor 4x
Click to expand...
Click to collapse
Then try this process first flash stock recovery and then use dload method and check whether it recovers or not.
miststudent2011 said:
Then try this process first flash stock recovery and then use dload method and check whether it recovers or not.
Click to expand...
Click to collapse
i did it but dosent work
i also use the huawei multi tool it also dosent worked
one thing i noticed that when i flash cust file it shows failed : remote(command not allowed )
also cache is not wiping through fastboot mode it shows the same failed : remote(command not allowed )
i think its a soft brick situation because it boot in fastboot and rescue mode also it show honor logo and went off
i dont know what to do i flashed every single official rom from b161 to b520
and also flashed twrp it also didnt work
please help me
gilmaan azmi said:
i did it but dosent work
i also use the huawei multi tool it also dosent worked
one thing i noticed that when i flash cust file it shows failed : remote(command not allowed )
also cache is not wiping through fastboot mode it shows the same failed : remote(command not allowed )
i think its a soft brick situation because it boot in fastboot and rescue mode also it show honor logo and went off
i dont know what to do i flashed every single official rom from b161 to b520
and also flashed twrp it also didnt work
please help me
Click to expand...
Click to collapse
Just only flash stock recovery not all images and try dload.
You can't flash cust with fastboot and also you can't wipe cache with fastboot
miststudent2011 said:
Just only flash stock recovery not all images and try dload.
You can't flash cust with fastboot and also you can't wipe cache with fastboot
Click to expand...
Click to collapse
i flashed stock recovery but it dosent boot in recovery mode
also it tried dload method but dosent work
what is the reason, that the phone flashed recovery properly but not booting in recovery mode
gilmaan azmi said:
i flashed stock recovery but it dosent boot in recovery mode
also it tried dload method but dosent work
what is the reason, that the phone flashed recovery properly but not booting in recovery mode
Click to expand...
Click to collapse
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.
miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.
Click to expand...
Click to collapse
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but didnt work
miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.[/Q
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i flashed the same but it didnt work
dont know what i am donig wrong
every procedure i followed is correct
Click to expand...
Click to collapse
miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.
Click to expand...
Click to collapse
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but it didnt work
dont know where i am going wrong
gilmaan azmi said:
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but it didnt work
dont know where i am going wrong
Click to expand...
Click to collapse
There was a similar case which I helped him to solve the issue but dont remember the build number that helped him.
Check my previous posts you can find the guide and build number.
miststudent2011 said:
There was a similar case which I helped him to solve the issue but dont remember the build number that helped him.
Check my previous posts you can find the guide and build number.
Click to expand...
Click to collapse
which post sir
same issue
I'm facing exactly same issue, Any help welcome.
gilmaan azmi said:
which post sir
Click to expand...
Click to collapse
did ur issue get fixed? please post updates.
Related
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Can you boot into bootloader ?
You may change your recovery to the origine one then flash a new ROM
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
What's the status of your phone?
If you can acces fastboot mode it's ok
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
If you can enter fastboot mode and download official ROM pack, then you are all good.
Method:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
kamrangul87 said:
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
Click to expand...
Click to collapse
Fastboot method most probably is your only choice now.
Follow this method here:
https://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Reboot to recovery wit volume up + power button trigger . and then click on reboot button and then select reboot to bootloader. Their you flash system.img , boot.img and cust.img to their partitions. And then reboot . if u understand what I said I will help u further .
A little bit of help needed...
Hi,
I basically did the same mistake as the other guys, unlocked the bootloader and installed twrp, all fine. Then I ***** up by trying to root fellowing a tuto made for the non-Che2-L11 ones.
I have no problem going into TWRP, the bootloader, or the black screen from huawei (witch looks like.. some kind of second recovery ?)
I managed to download the stock software from huawei ( Honor 4X Firmware (Che2-L11, Android5.1.1, EMUI3.1, C636B360, Malaysia)S.zip ) and also managed to download a version of HuaweiUpdateExtractor ( 0.9.9.5 ).
My problem now, is that if I understood correctly, I should extract the image files from the APP from the firmware zip I downloaded from Huawei.
Unfortunatly, there is no HuaweiUpdateExtractor profile for the honor 4x Che2-L11.
There I may need assistance, or guidance.
Does the profile already exists somewhere ?
How can I create my own, is it not too complex ?
Maybe someone already extracted thoses files and could make them available somewhere ?
Or maybe is there any other way to unbrick my phone ?
************************************
EDIT: Nevermind. I managed to extract the files without profiles. I flashed them 3 but nothing really changed.. So.. I'm kinda stuck. no Idea from here.
************************************
************************************
EDIT (of the edit) : Nevermind the previous nevermind ! It actually worked ! Well, kinda.. Seems my new "stock rom" is quite buggy, strangly, but nevertheless, it work Thanks
************************************
Thanks a lot.
Hello
Hello friend, i also have the same problem. My huawei honor 4x che2-l11 stuck on huawei logo i can not unbrick it. if you succsed so plz attach the file you extract to my email plzzzzz.
email: [email protected]
Thanks.
Hi
i need the misc partition backup from any working p9plus
My vie-l29 was bricked and to unbrick it i used a factory board firmware of an al10 that erase all partition and recover them but the misc partition is missing ,so the phone have no back and home button , no notification bar no sound and no wifi, if i update to any rom it will stuck to boot logo ( finaly updated to v29b170 but work only if i don't flash boot)
I think the problem is comming from this partition "misc" it's a configuration partition i think
So if any one can share this partition it will be helpfull
No mater from l29 l09 or al10 i want give it a try
Thank you
any one can help pls , im not sure it will work but i want give a try
thank you
makabress said:
any one can help pls , im not sure it will work but i want give a try
thank you
Click to expand...
Click to collapse
can you boot into erecovery and just reflash stock ROM? vol up + power and recovery
Deviatorz said:
can you boot into erecovery and just reflash stock ROM? vol up + power and recovery
Click to expand...
Click to collapse
I can boot into recovery and flash a stock firmware but the phone will stuck in boot logo after
Allready fully cleaned phone using "fastboot erase_emmc_all"
And entred the phone into download mode "huawei com 1.0" and flashed with a factory rom vie-al10m053
And than with the stock rom and nothing work
If i flash a boot and recovery from the factory rom and system/cust/datauser/cache from a stock rom the phone will boot but no sound no wifi
If i flash a twrp in recovery i can't boot into recovery it will stuck in logo
I can root the phone with kingroot from pc if there is somthing to edit
Thank you
makabress said:
I can boot into recovery and flash a stock firmware but the phone will stuck in boot logo after
Allready fully cleaned phone using "fastboot erase_emmc_all"
And entred the phone into download mode "huawei com 1.0" and flashed with a factory rom vie-al10m053
And than with the stock rom and nothing work
If i flash a boot and recovery from the factory rom and system/cust/datauser/cache from a stock rom the phone will boot but no sound no wifi
If i flash a twrp in recovery i can't boot into recovery it will stuck in logo
I can root the phone with kingroot from pc if there is somthing to edit
Thank you
Click to expand...
Click to collapse
Have u try to use Dc Phoenix?
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Have u try to use Dc Phoenix?
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Yes trayed with dc-phoenix the result is the same ,no wifi no sound no home button no notification barre
makabress said:
Yes trayed with dc-phoenix the result is the same ,no wifi no sound no home button no notification barre
Click to expand...
Click to collapse
Try ask someone in the root/twrp thread. If someone can backup and share to u.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Try ask someone in the root/twrp thread. If someone can backup and share to u.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Ok i will do
Thank you
How can you flash the partition file?
twrp or fastboot?
M.KK said:
How can you flash the partition file?
twrp or fastboot?
Click to expand...
Click to collapse
Fastboot or in my case with dc-pheonix
pls if any one can do this just use this command in adb : adb pull /dev/block/mmcblk0p20 c:\misc.img
and upload the misc.img it will take you a few second
thank you
makabress said:
Fastboot or in my case with dc-pheonix
Click to expand...
Click to collapse
Ok
You can not solve this problem by using mic file.ok
You can flash the complete stock .
By the
Fastboot flash zip (file name).zip
First the update.zip
And then
Data file to your local.ok
M.KK said:
Ok
You can not solve this problem by using mic file.ok
You can flash the complete stock .
By the
Fastboot flash zip (file name).zip
First the update.zip
And then
Data file to your local.ok
Click to expand...
Click to collapse
Allready flashed all the stock firmware ,with fastboot ,and with the recovery mode , /erased all partition and reflashed with stock
Flashed with a factory board software nothing make the phone stable
Have donne a full emmc erase "fastboot erase_emmc_all"
And entred the phone in download mode "huawei com 1.0" like qload 9008 and flashed but nothing change
Reflashed different oeminfo and nothing
Finaly flashed with nxt-l29 firmware for test and now everythink work except wifi and sound
Misc is a config partition and not integrated to the stock rom like the old generation,it come with the phone
My misc partition is wiped this is way i ask for it, it's the last test that i have to do
I have unbricked other huawei like my nxt and a g8 by replacing partition comming from working phone
Thank you
makabress said:
Allready flashed all the stock firmware ,with fastboot ,and with the recovery mode , /erased all partition and reflashed with stock
Flashed with a factory board software nothing make the phone stable
Have donne a full emmc erase "fastboot erase_emmc_all"
And entred the phone in download mode "huawei com 1.0" like qload 9008 and flashed but nothing change
Reflashed different oeminfo and nothing
Finaly flashed with nxt-l29 firmware for test and now everythink work except wifi and sound
Misc is a config partition and not integrated to the stock rom like the old generation,it come with the phone
My misc partition is wiped this is way i ask for it, it's the last test that i have to do
I have unbricked other huawei like my nxt and a g8 by replacing partition comming from working phone
Thank you
Click to expand...
Click to collapse
i give the file path?
M.KK said:
i give the file path?
Click to expand...
Click to collapse
File path inside misc folder? Or what?
M.KK said:
i give the file path?
Click to expand...
Click to collapse
File path inside misc folder? Or what?
All i need is someone share with me this misc partition, that i can be fixed ,if it work than the problem is soft if not than the problem is hardware
If any one can help just do this command:
adb pull /dev/block/mmcblk0p20 c:\misc.img
and upload the misc.img it will take you a few second
Thank you any way
makabress said:
All i need is someone share with me this misc partition, that i can be fixed ,if it work than the problem is soft if not than the problem is hardware
If any one can help just do this command:
adb pull /dev/block/mmcblk0p20 c:\misc.img
and upload the misc.img it will take you a few second
Thank you any way
Click to expand...
Click to collapse
Brother I help you but I have boot loader is locked and I unlocked the boot loader may all data lost I think you now about that.
If you have alternate about I can help the partition file is in boot.img or recovery.img our data file or UPDATE.PP ?
M.KK said:
Brother I help you but I have boot loader is locked and I unlocked the boot loader may all data lost I think you now about that.
If you have alternate about I can help the partition file is in boot.img or recovery.img our data file or UPDATE.PP ?
Click to expand...
Click to collapse
if your bootloader is locked than you can't help me
thank you any way
has anyone done this for you yet? if not ill happily unlock my bootloader, i have L09 new zealand model, i have one more day of work before my days off, so will organise in a few hours
Hi, I have problem.
i unlocked and rooted my honor 5C NEM L-21, but then i changed my mind and wanted to unroot it, when i done it the device bricked. after some investigation a unbricked it via adb, but now i cant go to recovery where i have backed up my old rom. I cant even go to developers options. So now im stuck with partly functional ROM and i cant even done Factory reset. I tried to download and install ROM via Firmware Finder, but always when i try to install the rom, it writes that it is not verified.
Can anyone please help me? Im really worried. Thanks
twrp backup
I found my backup on SD card, but i dont know how to flash it since i cant boot into recovery or enable usb debugging
NameNotFound74 said:
Hi, I have problem.
i unlocked and rooted my honor 5C NEM L-21, but then i changed my mind and wanted to unroot it, when i done it the device bricked. after some investigation a unbricked it via adb, but now i cant go to recovery where i have backed up my old rom. I cant even go to developers options. So now im stuck with partly functional ROM and i cant even done Factory reset. I tried to download and install ROM via Firmware Finder, but always when i try to install the rom, it writes that it is not verified.
Can anyone please help me? Im really worried. Thanks
Click to expand...
Click to collapse
Download stock firmware and flash it via dload method.
i dont know exactly how to do it. Do i just create dload folder on sd card, put the rom in it, then turn off the device, pres volume + and - and power button? or do i have to do even something else?
And where can i download Stock ROM? I downloaded some but i dont know if it is legit, official ROM
NameNotFound74 said:
i dont know exactly how to do it. Do i just create dload folder on sd card, put the rom in it, then turn off the device, pres volume + and - and power button? or do i have to do even something else?
And where can i download Stock ROM? I downloaded some but i dont know if it is legit, official ROM
Click to expand...
Click to collapse
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
hassanjavaid8181 said:
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
Click to expand...
Click to collapse
Thanks, i will try it!
NameNotFound74 said:
Thanks, i will try it!
Click to expand...
Click to collapse
hassanjavaid8181 said:
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
Click to expand...
Click to collapse
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
NameNotFound74 said:
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
Click to expand...
Click to collapse
Only firmware which will flash via dload..should be same number or higher number...
For example if you were on b340 you can only flash b340 or higher number like b341 or 350
You cannot flash 330 without rollback pkg
hassanjavaid8181 said:
Only firmware which will flash via dload..should be same number or higher number...
For example if you were on b340 you can only flash b340 or higher number like b341 or 350
You cannot flash 330 without rollback pkg
Click to expand...
Click to collapse
can i flash rollback when i have unlocked bootloader? Information on honor websites says that i cant have rooted or unlocked phone...
NameNotFound74 said:
can i flash rollback when i have unlocked bootloader? Information on honor websites says that i cant have rooted or unlocked phone...
Click to expand...
Click to collapse
now i flashed rollback and it says that im on b300-log, but i still cant flash b350
NameNotFound74 said:
now i flashed rollback and it says that im on b300-log, but i still cant flash b350
Click to expand...
Click to collapse
Did you download correct pkg according to your build number
hassanjavaid8181 said:
Did you download correct pkg according to your build number
Click to expand...
Click to collapse
after that i downloaded another one, with emui 4, works great, now i will just upgrade to emui 5 via OTA. Thank you for your help!
NameNotFound74 said:
after that i downloaded another one, with emui 4, works great, now i will just upgrade to emui 5 via OTA. Thank you for your help!
Click to expand...
Click to collapse
Glad that you fixed it..now enjoy
hassanjavaid8181 said:
Glad that you fixed it..now enjoy
Click to expand...
Click to collapse
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
NameNotFound74 said:
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
Click to expand...
Click to collapse
Did backup restored successfully??
hassanjavaid8181 said:
Did backup restored successfully??
Click to expand...
Click to collapse
No it didn't worked for me. It happened to me twice and either time it didn't work. It was always stuck on honor logo and couldn't be turned on.
NameNotFound74 said:
No it didn't worked for me. It happened to me twice and either time it didn't work. It was always stuck on honor logo and couldn't be turned on.
Click to expand...
Click to collapse
Did you try to change twrp version??
NameNotFound74 said:
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
Click to expand...
Click to collapse
Whats your build number and model?
Are you able to flash twrp or able to boot to it?
Flash Rollback package
NameNotFound74 said:
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
Click to expand...
Click to collapse
Then stock firmware flash using dload
Hello guys im new to the forum,
I wanted to root my phone a p9+ VIE-L09 with android 7.0
I tried the whole afternoon with no success and I think I almost bricked my phone.
from what I have understood I have to
Enable fast boot <---- DONE
install TWRP <---- don't know what to do
Root <---- ?
I tried using droidth's SRK tool but doesn't work for VIE-L09 I think?
sorry I'm a noob
http://www.android.gs/root-huawei-p9-p9-plus/
Thank you very much im goint to try it out
Schony125 said:
Thank you very much im goint to try it out
Click to expand...
Click to collapse
dunno if the links are ok and updated but the guide itself works.
masze said:
dunno if the links are ok and updated but the guide itself works.
Click to expand...
Click to collapse
Unfortunatly it doesn't work when I need to reboot in twrp and install the root package the device is stuck on loading screen with "your device is booting now..."
it seems like it cannot load twrp recovery?
No recovery tool supports VIE-L09 model (TWRP/CWM), I tried also with One Click Root but the dont support the model I gues this phone cannot be rooted because there is no recovery support
Schony125 said:
No recovery tool supports VIE-L09 model (TWRP/CWM), I tried also with One Click Root but the dont support the model I gues this phone cannot be rooted because there is no recovery support
Click to expand...
Click to collapse
Yes, twrp should work, you must have the wrong twrp or doing something wrong.
https://twrp.me/devices/huaweip9plus.html
try TWRP from This post : https://forum.xda-developers.com/p9-plus/development/twrp-t3584486
boot into bootloader
use this cmd : fastboot flash recovery2 twrp-3.1.1-1-vie.img
then this cmd to reboot : fastboot reboot
then press VOL+ 3sec
xzanium said:
try TWRP from This post : https://forum.xda-developers.com/p9-plus/development/twrp-t3584486
boot into bootloader
use this cmd : fastboot flash recovery2 twrp-3.1.1-1-vie.img
then this cmd to reboot : fastboot reboot
then press VOL+ 3sec
Click to expand...
Click to collapse
Did this work? I am hoping to root my Huawei P9 VIE-L09C02 with B350 (P9 Plus with Vodafone Stock ROM, EMUI 5.1 & Android 7.0)
Normally it works, but your bootloader and FRP must be unloked
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
luigifan3 said:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
Click to expand...
Click to collapse
Use dload with a service firmware.
You need to flash this 2 times,once for the firmware and second time for vendor,and the firmware UPDATE.APP can be found in the update_sd.zip and the vendor UPDATE.APP can be found in the PRA-L31 or PRA-L11 folders (most likely you will have PRA-L31,you can find this in the engineering menu by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info,but since you cannot boot flash PRA-L31 vendor).
http://androidhost.ru/6uc - this is latest firmware,but takes a very very long time to download
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is the first official firmware released,but download speed is very good
If you don't know how to use dload you can look it up on forums.
If your phone is really hard bricked and can't do anything, check this out:
I know how to use dload, but how I can boot into dload mode with TWRP installed and bootloader locked?
luigifan3 said:
I know how to use dload, but how I can boot into dload mode with TWRP installed and bootloader locked?
Click to expand...
Click to collapse
Dload works no matter what,at least I was able to enter it when I bricked my phone,even when I completely screwed up my recovery partition,so you should be good. Try using it with the service firmware I left you.
dinoderda said:
Dload works no matter what,at least I was able to enter it when I bricked my phone,even when I completely screwed up my recovery partition,so you should be good. Try using it with the service firmware I left you.
Click to expand...
Click to collapse
Now I have downloaded the service firmware so how I am going to flash it now? Like do I extract the UPDATE.APP and flash it in TWRP or what? You said that flash UPDATE.APP, but am I going to do that in dload mode or TWRP?
luigifan3 said:
Now I have downloaded the service firmware so how I am going to flash it now? Like do I extract the UPDATE.APP and flash it in TWRP or what? You said that flash UPDATE.APP, but am I going to do that in dload mode or TWRP?
Click to expand...
Click to collapse
In dload,make sure you make a folder in the root of your sdcard called dload and put that in there.
dinoderda said:
In dload,make sure you make a folder in the root of your sdcard called dload and put that in there.
Click to expand...
Click to collapse
Now I have the UPDATE.APP in my dload folder, but how I boot to the dload mode now?
luigifan3 said:
Now I have the UPDATE.APP in my dload folder, but how I boot to the dload mode now?
Click to expand...
Click to collapse
Volume Up + Volume Down + Power Button.
dinoderda said:
Volume Up + Volume Down + Power Button.
Click to expand...
Click to collapse
I tried that, it just boots into TWRP
EDIT: I got to dload, but it says software installation failed
luigifan3 said:
I tried that, it just boots into TWRP
EDIT: I got to dload, but it says software installation failed
Click to expand...
Click to collapse
Hm,make sure you used the service firmware I left you,but if you are sure you did,your last resort is DC Phoenix which you will need to pay 20 euros.
luigifan3 said:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
Click to expand...
Click to collapse
if you have TWRP installed could you make a backup of your oeminfo partition so we could provide you the right firmware to recover your device
RAR1991 said:
if you have TWRP installed could you make a backup of your oeminfo partition so we could provide you the right firmware to recover your device
Click to expand...
Click to collapse
Ok, but does it provide the right info if I have flashed different oeminfo.img?
dinoderda said:
Hm,make sure you used the service firmware I left you,but if you are sure you did,your last resort is DC Phoenix which you will need to pay 20 euros.
Click to expand...
Click to collapse
I've tried a different firmware for my device and now I can't get to dload anymore so does it mean that I've chosen the wrong firmware? And by the way I read somewhere that if the dload says error it can depend on the microsd card.
I tried it again with the service firmware and I got to dload and it didn't have error anymore and now I've got everything worked and my phone is unbricked
luigifan3 said:
I tried it again with the service firmware and I got to dload and it didn't have error anymore and now I've got everything worked and my phone is unbricked
Click to expand...
Click to collapse
great
I was stuck with a similar problem. Device bricked and flashing TWRP and restoring backups, then stock recovery and stock roms, but nothing worked until I found this post. Thanks a lot dinoderda for your help.
dinoderda said:
Use dload with a service firmware.
You need to flash this 2 times,once for the firmware and second time for vendor,and the firmware UPDATE.APP can be found in the update_sd.zip and the vendor UPDATE.APP can be found in the PRA-L31 or PRA-L11 folders (most likely you will have PRA-L31,you can find this in the engineering menu by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info,but since you cannot boot flash PRA-L31 vendor).
http://androidhost.ru/6uc - this is latest firmware,but takes a very very long time to download
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is the first official firmware released,but download speed is very good
If you don't know how to use dload you can look it up on forums.
Click to expand...
Click to collapse
Hello again, I've been using the older service firmware for few months now and now I decided to install the latest service firmware after I had no success with flashing the firmware through TWRP and I downloaded the service firmware put the necessary files to the dload folder and installed it via the software update in the dialer and typing *#*#2846579#*#* and going to dload that way. It installed to 100% and then when it restarted it goes to Error Mode and it says to update the firmware again but it just loops to error mode and I cannot do anything so I think I accidentally removed some neccessary files in the dload folder but now I would need to fix the error mode loop.