I'm just sharing the recovery.
Source: 4pda
With working reboot to recovery mode
Link : https://drive.google.com/drive/folders/17YW09XpEHq7xgBAriwA-mgtEG0pckop2?usp=sharing
Which img file I'm download
There is a two img file here ? Tell me fast please
xdatusar said:
There is a two img file here ? Tell me fast please
Click to expand...
Click to collapse
3.2.1-5 is the latest one
It is work on naugat and oreo
moonchild said:
3.2.1-5 is the latest one
Click to expand...
Click to collapse
Tell me
xdatusar said:
Tell me
Click to expand...
Click to collapse
I already did
Any latest twrp as stock ui
Sent from my Redmi 4X using XDA Labs
I followed
Unlock phone>flashed TWRP>backed up stock rom>wiped data, system, dalvik>flashed NOS> Gaaps>Magisk.
But after setting pattern when i rebooted my phone my phone, I'm getting enter pattern to start option at boot however it is booting after entering pattern but this is annoying as phone is asking for pattern on every boot.
Tested TWRP 3.2.1-5 img, it started but looks frozen, any touches on screen does nothing.
ecsvik said:
Tested TWRP 3.2.1-5 img, it started but looks frozen, any touches on screen does nothing.
Click to expand...
Click to collapse
I suggest you to use Nikesh twrp it's best for Oreo roms
prin2ce said:
I suggest you to use Nikesh twrp it's best for Oreo roms
Click to expand...
Click to collapse
Thank you, prin2ce! I found it, though I can't notice big difference between that one and the official one.
I noticed It might be able to backup Firmware, but it's 0MB and in mount menu I cannot mount/unmount Firmware.
So, I think I stick to the official one yet.
ecsvik said:
Thank you, prin2ce! I found it, though I can't notice big difference between that one and the official one.
I noticed It might be able to backup Firmware, but it's 0MB and in mount menu I cannot mount/unmount Firmware.
So, I think I stick to the official one yet.
Click to expand...
Click to collapse
Your choice but why to back up firmware it is of no use once you've flashed the latest one then no need to flash it again
prin2ce said:
Your choice but why to back up firmware it is of no use once you've flashed the latest one then no need to flash it again
Click to expand...
Click to collapse
I'm still very newbie to android customization, so I thought it would be great if I would had a full system backup.
It could have saved me a half a day finding the problem some days ago when I flashed a not-so-perfect firmware.
I am so much worried about screw the bootloader or something up
ecsvik said:
I'm still very newbie to android customization, so I thought it would be great if I would had a full system backup.
It could have saved me a half a day finding the problem some days ago when I flashed a not-so-perfect firmware.
I am so much worried about screw the bootloader or something up
Click to expand...
Click to collapse
No just follow these steps-
Wipe system data cache dalvik. Then flash ROM and gapps and magisk if you want and you are good to go btw you need not flash fw everytime you flash a ROM if you want to update fw you can dirty flash it through twrp
prin2ce said:
I suggest you to use Nikesh twrp it's best for Oreo roms
Click to expand...
Click to collapse
Can u share twrp nikesh
Sent from my ASUS_Z00A using XDA Labs
psychoela said:
Can u share twrp nikesh
Click to expand...
Click to collapse
https://sourceforge.net/projects/teamghost/files/santoni_twrp/twrp_santoni_oreo.img/download
prin2ce said:
https://sourceforge.net/projects/teamghost/files/santoni_twrp/twrp_santoni_oreo.img/download
Click to expand...
Click to collapse
Using this twrp,i can't restore my backup
Sent from my ASUS_Z00A using XDA Labs
psychoela said:
Using this twrp,i can't restore my backup
Click to expand...
Click to collapse
I've no problems in restoring backup maybe you have to format your internal storage once
Today I tried to install crDroid.
I did not succeed !
I can not install anything with TWRP.
ROM does not work! Open Gaps, it does not work!
Magisk only 16 have managed to install it.
I deleted all the internal memory!
No screenshot can no longer do!
is it treble support ?
---------- Post added at 01:56 PM ---------- Previous post was at 01:01 PM ----------
prin2ce said:
I suggest you to use Nikesh twrp it's best for Oreo roms
Click to expand...
Click to collapse
can you give the link for the twrp that made by nikesh ?
criticallife said:
is it treble support ?
---------- Post added at 01:56 PM ---------- Previous post was at 01:01 PM ----------
can you give the link for the twrp that made by nikesh ?
Click to expand...
Click to collapse
this is non-treble
go to worldgiz.com there you can find nikesh's twrp or see previous post, there is link shared.
Related
This is a port of the stock Marshmallow T805 rom for the SM-T800.
Install with TWRP. Make sure you have the latest bootloader installed.
http://forum.xda-developers.com/galaxy-tab-s/general/t800-t805-lollipop-bootloaders-t3099362
First boot takes at least 10 mins.
ROM:
http://www.mediafire.com/download/6n8cjh0ac5nct40/SM-T800_T805OXA1CPH6_MM_3916.zip
BOOT IMAGES.
Use the IMAGE install button in TWRP.
Select BOOT as the partition to flash.
Removes the no mobile data icon in status bar and mobile data settings in connections.
https://www.androidfilehost.com/?fid=24591000424962583
PERMISSIVE KERNEL :
https://www.androidfilehost.com/?fid=24591000424962586
So far so good. Thanks @ashyx
Thanks ashyx!
Just wondering, will it be possible for you to port it to T705? Think if it is possible, a lot of T705 users will be thrilled...
Can you please tell me a step by step in installing?
Which do I install first?
The rom or the img?
Thanks.
---------- Post added at 11:45 AM ---------- Previous post was at 11:40 AM ----------
Can you please tell me a step by step in installing?
Which do I install first?
The rom or the img?
Thanks.
p9844131 said:
Thanks ashyx!
Just wondering, will it be possible for you to port it to T705? Think if it is possible, a lot of T705 users will be thrilled...
Click to expand...
Click to collapse
Do you have a T705?
BakaKuny said:
Can you please tell me a step by step in installing?
Which do I install first?
The rom or the img?
Thanks.
---------- Post added at 11:45 AM ---------- Previous post was at 11:40 AM ----------
Can you please tell me a step by step in installing?
Which do I install first?
The rom or the img?
Thanks.
Click to expand...
Click to collapse
Doesn't matter. But I'd install the rom first let it fully boot then flash the boot image.
ashyx said:
Do you have a T705?
Click to expand...
Click to collapse
Yep, I am currently using a T705.
p9844131 said:
Yep, I am currently using a T705.
Click to expand...
Click to collapse
I'll pm you with a link
ashyx said:
I'll pm you with a link
Click to expand...
Click to collapse
plz send me too><
ashyx said:
I'll pm you with a link
Click to expand...
Click to collapse
Thanks ashyx!
ashyx said:
I'll pm you with a link
Click to expand...
Click to collapse
Ans me to thinks
Envoyé de mon SM-T705 en utilisant Tapatalk
Installed the ROM this afternoon and so far it's working fine. I just have a question and an observation.
The question is how can I root the ROM so I can use Xposed. The observation is that besides the network sign and other things that got removed because they don't make sense on the WiFi rom, there's still a "Download booster" option in Settings (which requires LTE) and the Messages app, which also doesn't work on SM-T800 - I think it's also tied with the Contacts app so it's not as simple as just removing it.
Besides that, thank you so much for this port! Even if there are no big changes and new features, it still feels good to have stock Marshmallow, after waiting so much time for it. But tbh I'm just waiting for an AOSP Nougat ROM so I can enjoy decent Android with split screen.
Framboesa96 said:
Installed the ROM this afternoon and so far it's working fine. I just have a question and an observation.
The question is how can I root the ROM so I can use Xposed. The observation is that besides the network sign and other things that got removed because they don't make sense on the WiFi rom, there's still a "Download booster" option in Settings (which requires LTE) and the Messages app, which also doesn't work on SM-T800 - I think it's also tied with the Contacts app so it's not as simple as just removing it.
Besides that, thank you so much for this port! Even if there are no big changes and new features, it still feels good to have stock Marshmallow, after waiting so much time for it. But tbh I'm just waiting for an AOSP Nougat ROM so I can enjoy decent Android with split screen.
Click to expand...
Click to collapse
Just flash supersu with twrp.
Regarding the other stuff you mentioned.
It would be a waste of my time to do a full port of the rom by removing everything T805 related when the official rom will be out soon enough.
This is just so everyone can test it out.
aumast said:
Ans me to thinks
Envoyé de mon SM-T705 en utilisant Tapatalk
Click to expand...
Click to collapse
I can't test this myself, but someone said it installed fine.
No idea what works.
http://www.mediafire.com/?j8n3wbbmb1fn7yf
Kernel worki in t805?
Enviado desde mi SM-T805
Flashed with twrp and full wipe, data /cache and still stuck at samsung logo :/ whats wrong ?
hyperX- said:
Flashed with twrp and full wipe, data /cache and still stuck at samsung logo :/ whats wrong ?
Click to expand...
Click to collapse
At least 10 mins to boot.
hyperX- said:
Flashed with twrp and full wipe, data /cache and still stuck at samsung logo :/ whats wrong ?
Click to expand...
Click to collapse
Just installed ROM and it took over 10 mins to boot up first time.
I'm a new to this but i got it to twrp and selected install and selected the ROM and flashed it. The Tab S wont do anything, it been stuck in the black screen mode. Its been like 20 mins. I tried to repeat the same steps and I'm stuck here again. Help please?
ibeendoneit said:
I'm a new to this but i got it to twrp and selected install and selected the ROM and flashed it. The Tab S wont do anything, it been stuck in the black screen mode. Its been like 20 mins. I tried to repeat the same steps and I'm stuck here again. Help please?
Click to expand...
Click to collapse
Did you actually reboot?
You may need to wipe dalvik cache. If that doesn't work the DATA partition itself.
Hi Folks
I just start developments of Google AOSP rom based on 7.1.2 R6 for our P8 Lite 2017 PRA-LX1, this topic will show you only the developments progress of that rom, will be released once fix most of bugs.
This is only an info topic, do not spam it because will be closed at ended works.
the release builds topic will be on android developments section.
AOSP Recovery: fixed & booting.
AOSP System.
Audio.
Bluetooth.
Camera.
Display.
Fingerprints.
GPS.
Graphics: gralloc & hwcomposer.
Internal & External Storage.
Multimedia.
NFC.
RIL.
Sensors.
Wifi
Note:
Each time when I fix something, will be strike..keep in touch
Great job! First rom is finnaly coming to PRA-LX1!
P.S.: Also, you P8Lite 2015 has finished repairing?
Thank You.
I Was Waiting For This.
Because If You Remember My Device Won't Boot Cause I Wiped The System Partition By Mistake.
XTutorials said:
Great job! First rom is finnaly coming to PRA-LX1!
P.S.: Also, you P8Lite 2015 has finished repairing?
Click to expand...
Click to collapse
Yup
I just send the phone yesterday, no holidays on this period in italy, guess should be repaired quickly.
Finally an AOSP ROM!
Is this still using the stock kernel?
YSFYoussef480 said:
Thank You.
I Was Waiting For This.
Because If You Remember My Device Won't Boot Cause I Wiped The System Partition By Mistake.
Click to expand...
Click to collapse
Can't you use the Huawei update extractor to extract UPDATE.APP and flash that? Or get someone to make a system backup in TWRP and send it to you?
Vinnipinni said:
Can't you use the Huawei update extractor to extract UPDATE.APP and flash that? Or get someone to make a system backup in TWRP and send it to you?
Click to expand...
Click to collapse
Tried Everything !!!
YSFYoussef480 said:
Tried Everything !!!
Click to expand...
Click to collapse
I don't have the 2017 version, but what does it say? Can't you flash the system via fastboot? Or use stock recovery and force update to update it? Just remember that you need a FULL package. On most Huawei phones you can just flash a FULL package I'm TWRP. Just OTA doesn't work because it doesn't include a full system.img most of the times.
Vinnipinni said:
I don't have the 2017 version, but what does it say? Can't you flash the system via fastboot? Or use stock recovery and force update to update it? Just remember that you need a FULL package. On most Huawei phones you can just flash a FULL package I'm TWRP. Just OTA doesn't work because it doesn't include a full system.img most of the times.
Click to expand...
Click to collapse
No, I Can't
boofman said:
Finally an AOSP ROM!
Is this still using the stock kernel?
Click to expand...
Click to collapse
Yes still use stock kernel.
haky 86 said:
Yes still use stock kernel.
Click to expand...
Click to collapse
Is There Any ETAs,Please ?!
YSFYoussef480 said:
Is There Any ETAs,Please ?!
Click to expand...
Click to collapse
no, once get booted I"ll post screenshots and modding this phone will be very hard because no kernel source for our pra-lx1 yet.
yeah sounds great! will this rom be prerooted?
and will there be more free space in local storage? =)
xpatze85x said:
yeah sounds great! will this rom be prerooted?
and will there be more free space in local storage? =)
Click to expand...
Click to collapse
Once you have root, even with the Stock ROM, you can already start uninstalling System Apps to debloat.
---------- Post added at 05:43 AM ---------- Previous post was at 05:41 AM ----------
haky 86 said:
Yes still use stock kernel.
Click to expand...
Click to collapse
This is my first Huwei device, do they usually release Sources for Devs?
boofman said:
This is my first Huwei device, do they usually release Sources for Devs?
Click to expand...
Click to collapse
They released the source code for p8, and some other device but late. Kirin isn't dev friendly AFAIK
Reserved
-no signs of booting about aosp 7.1.2.
-anyone would like to try it here my repos:
https://github.com/hak86/android_device_huawei_prague
https://github.com/hak86/android_vendor_huawei_prague
I send a message via email to huawei about sending cd that contain source code of this phone, but I've some doubt that will respond..who's know..
haky 86 said:
-no signs of booting about aosp 7.1.2.
-anyone would like to try it here my repos:
https://github.com/hak86/android_device_huawei_prague
https://github.com/hak86/android_vendor_huawei_prague
I send a message via email to huawei about sending cd that contain source code of this phone, but I've some doubt that will respond..who's know..
Click to expand...
Click to collapse
So Is There Any Hopes For This Rom !!
Cause I'm So Excited For This !!
I Need It Cause My Device Won't Boot Cause I Wiped The System Partition By Mistake !
I Can't Do Anything With It Except Staring At It !
Soo Will This Rom Release Soon ???
YSFYoussef480 said:
So Is There Any Hopes For This Rom !!
Cause I'm So Excited For This !!
I Need It Cause My Device Won't Boot Cause I Wiped The System Partition By Mistake !
I Can't Do Anything With It Except Staring At It !
Soo Will This Rom Release Soon ???
Click to expand...
Click to collapse
Have you tried restoring the stock ROM using ADB? It worked for me..
boofman said:
Have you tried restoring the stock ROM using ADB? It worked for me..
Click to expand...
Click to collapse
How ?!
YSFYoussef480 said:
How ?!
Click to expand...
Click to collapse
Sorry, I meant installing, not restoring. It's just bascally downloading the ROM, extracting the contents using Huawei update extractor, and using ADB to push the files in. You will need to reinstall TWRP and Root afterwards..Google is your friend, there are instructions out there, as there are 3 ways to install the stock ROM: using the updater on your phone, using the key combo, and the 3rd one being ADB.
This is TWRP to Mate 9/Android O, brought to you by FunkyHuawei.
It's just a preliminary build so I can't promise anything/everything will work! Keep that in mind. I'm not responsible if you brick your device.
EDIT: Does not work with Mate 10 series.
DOWNLOAD LINK:
https://drive.google.com/open?id=0B45NCsO2AL_1NEh2aDFLM3JlYkU
It works on the Android O build here:
https://www.reddit.com/r/FunkyHuawei/comments/75uwkd/october_12_first_official_android_o_beta_for/
and the official European beta.
To install:
First, have Android O running. Unlock the bootloader. Download the twrp image.
Then, run in fastboot mode:
fastboot flash recovery_ramdisk twrp_android_o_mate9_a1.img
Then, reboot holding volume up, and you've got TWRP!
Note: With the Android O update, it is no longer possible to flash the recovery2 partition. Furthermore, the names of the partitions have changed. Please keep that in mind, and don't mess around too much with TWRP, to be sure you don't brick your system!
That's Cool ("L")
A way ahead always.
Thanks,
goldybewon
@duraaraa
Can you upload the sources to github.com or upload boot image here?
Thank you.
Blackball said:
@duraaraa
Can you upload the sources to github.com or upload boot image here?
Thank you.
Click to expand...
Click to collapse
What are you looking for? You could just unpack twrp using android image kitchen if you want partition names etc.
Yes I know. But I'm interested in Oreo kernel.
Blackball said:
Yes I know. But I'm interested in Oreo kernel.
Click to expand...
Click to collapse
Kernel is not included within recovery anymore. Things have changed a lot.
Wooooow amazing ...??
Sent from my MHA-L09 using XDA-Developers Legacy app
duraaraa said:
Kernel is not included within recovery anymore. Things have changed a lot.
Click to expand...
Click to collapse
ok. Hope i get a oreo firmware soon (P10plus) [emoji106]
Thank you
Blackball said:
ok. Hope i get a oreo firmware soon (P10plus) [emoji106]
Thank you
Click to expand...
Click to collapse
Actually, I have oreo for P10 plus, but haven't released it. If you want to test it, maybe I can try to release something. I want to find something more recent though.
I just want the firmware to look inside what things have changed etc. Maybe you can write me a pm what we can do that I get the files.
---------- Post added at 01:06 PM ---------- Previous post was at 12:30 PM ----------
@duraaraa
I have sent a pm
Ah. boot partition is now called ramdisk_a, and zImage (kernel) is kept in kernel_a.
Need to "hack" magisk to get this working xD
Edit: It's impossible!
Maybe.
Magisk refuses to find ramdisk_a or /dev/block/sdd36.
That's interesting. I hope Huawei upload new sources and this time maybe working sources
@duraaraa could you upload stock recover_ramdisk? I can't go back to N without it and wasted 2 credits :/
ante0 said:
Ah. boot partition is now called ramdisk_a, and zImage (kernel) is kept in kernel_a.
Need to "hack" magisk to get this working xD
Edit: It's impossible!
Maybe.
Magisk refuses to find ramdisk_a or /dev/block/sdd36.
Click to expand...
Click to collapse
With supersu,the same?
auras76 said:
With supersu,the same?
Click to expand...
Click to collapse
I think so. A few files that are usually found in boot image are not found in ramdisk_a. So even if we could get it to find that partition it probably won't work anyway.
I tried making a pre-rooted image, but since it's missing sepolicy it wouldn't work (I guess that's why anyway).
I can't live without root . Mainly because all my backups are made with Titanium Backup, which requires root. And I need adfree..
ante0 said:
@duraaraa could you upload stock recover_ramdisk? I can't go back to N without it and wasted 2 credits :/
Click to expand...
Click to collapse
I can't upload it for everyone but if you send an email to FH support you can get a hold of it.
duraaraa said:
I can't upload it for everyone but if you send an email to FH support you can get a hold of it.
Click to expand...
Click to collapse
Thanks
ante0 said:
Ah. boot partition is now called ramdisk_a, and zImage (kernel) is kept in kernel_a.
Need to "hack" magisk to get this working xD
Edit: It's impossible!
Maybe.
Magisk refuses to find ramdisk_a or /dev/block/sdd36.
Click to expand...
Click to collapse
INSTALL THIS PATCHED SUPERSU.ITS WORKING
https://androidfilehost.com/?fid=889964283620758335
auras76 said:
INSTALL THIS PATCHED SUPERSU.ITS WORKING
https://androidfilehost.com/?fid=889964283620758335
Click to expand...
Click to collapse
Cool. Do you know what's changed in it? I'm not by a computer so can't really compare :/
ante0 said:
Cool. Do you know what's changed in it? I'm not by a computer so can't really compare :/
Click to expand...
Click to collapse
boot_a to ramdisk_a
After browsing through the new Oreo threads, there were again a lot of users with issues related to new bootlaoder and firmware.
So to avoid that I tried installing the new Beta 25 without any firmware files only updating system and boot, and that seam to work just fine.
It was the same with back than fron android MM to N.
To install the image you need the new TWRP linked here: https://forum.xda-developers.com/showpost.php?p=74154185&postcount=37
But its enough to boot the new TWRP with fastboot it does nto have to be flashed.
Here is the Oxygen OS Beta 25 zip without firmware for OnePlus 3: https://www.androidfilehost.com/?fid=962021903579485163
Anyone tried this? It's just simple install oreo twrp over my standard twrp, and then just install the cooked oreo zip??
Sent from my ONEPLUS A3003 using Tapatalk
DavidXanatos said:
After browsing through the new Oreo threads, there were again a lot of users with issues related to new bootlaoder and firmware.
So to avoid that I tried installing the new Beta 25 without any firmware files only updating system and boot, and that seam to work just fine.
It was the same with back than fron android MM to N.
To install the image you need the new TWRP linked here: https://forum.xda-developers.com/showpost.php?p=74154185&postcount=37
But its enough to boot the new TWRP with fastboot it does nto have to be flashed.
Here is the Oxygen OS Beta 25 zip without firmware for OnePlus 3: https://www.androidfilehost.com/?fid=962021903579485163
Click to expand...
Click to collapse
as you haven't flashed Oreo Firmware is Fingerprint, Cellular Data, wifi etc working properly?
Yea I havn't noticed any issues till now, seams just fine.
Couldn't boot. Asking for password. Any solution?
5559anand said:
Couldn't boot. Asking for password. Any solution?
Click to expand...
Click to collapse
data was encrypted.follow this
weigeloveu said:
data was encrypted.follow this
Click to expand...
Click to collapse
Are this work?
xsetiadi said:
Are this work?
Click to expand...
Click to collapse
I flashed in this order . it worked for me
1. Oreo TWRP
2. Oreo Rom zip
3. Disable dm-verity zip
4. Supersu
xsetiadi said:
Are this work?
Click to expand...
Click to collapse
i haven''t try it yet,
---------- Post added at 11:22 PM ---------- Previous post was at 11:20 PM ----------
5559anand said:
I flashed in this order . it worked for me
1. Oreo TWRP
2. Oreo Rom zip
3. Disable dm-verity zip
4. Supersu
Click to expand...
Click to collapse
where could I found the dm-verity.zip and what is it ?
weigeloveu said:
i haven''t try it yet,
---------- Post added at 11:22 PM ---------- Previous post was at 11:20 PM ----------
where could I found the dm-verity.zip and what is it ?
Click to expand...
Click to collapse
I think it's this. There's a new post for Oreo tho (link)
vafac said:
I think it's this. There's a new post for Oreo tho (link)
Click to expand...
Click to collapse
thanks very much
The dm fix is necessary even to a decrypted phone? In order to follow your installation method?
Sent from my ONEPLUS A3003 using Tapatalk
delete.
need to bypass or crack littlerabbit app or a rom developer can port a working rom with this files..
Has anyone discovered how to circumvent the activation screen?
oliveiranetto91 said:
Has anyone discovered how to circumvent the activation screen?
Click to expand...
Click to collapse
no. i think developer added for take money from people... but other files can usable inside of this rom...
KaptanHarlock said:
no. i think developer added for take money from people... but other files can usable inside of this rom...
Click to expand...
Click to collapse
I tried to join the rom group via QQI app to get more information, but I could not participate.
you can try to ban network of teleservicesprovider. for example,you can set hosts file or safecenter before opening network
i found cracked version link but i cant download it
https://share.weiyun.com/4a1d1ed0384b4054c5a1db6d6a575af2
post updated
KaptanHarlock said:
i found cracked version link but i cant download it
https://share.weiyun.com/4a1d1ed0384b4054c5a1db6d6a575af2
Click to expand...
Click to collapse
I have successfully downloaded and reuploaded the ROM on mega. Here is the link:
https://mega.nz/#!VMo3DL7Y
Though I have tried to flash it but with no success. TWRP says no OS is installed.
---------- Post added at 02:18 AM ---------- Previous post was at 02:17 AM ----------
mindkiller_18 said:
I have successfully downloaded and reuploaded the ROM on mega. Here is the link:
https://mega.nz/#!VMo3DL7Y
Though I have tried to flash it but with no success. TWRP says no OS is installed.
Click to expand...
Click to collapse
Decryption key: !GJ1_9nlnH53eDUtPjwVrOXzOOFH7PWeVhqbxxMnMKc4
I try but camera didn't work and get over heat it, then I wipe and install over android 7 and not says that the is no is installed after installation . Some one get success installing the Rom
Just swipe to right , don't worry about warning no os installed . You have to be on Android 7 firmware of course . I installed it on zui 3.1 . Everything looks good , camera works as on stock zui . Several Chinese apps which I couldn't uninstall even with uninstall system apps . When I back to Los 14.1 I had some issue with storage in TWRP ( about 10 GB ) . Format data solved it . Google play works good . I installed it by Google installer
https://androidfilehost.com/?fid=961840155545586390
post updated
Link not working,upload at other site plz
puppetmaster2 said:
Link not working,upload at other site plz
Click to expand...
Click to collapse
link working . use vpn
Post updated.
Multilang v1 added
So it need ZUI as base? Thought about using Dual Patcher with this as a second.
ch3mn3y said:
So it need ZUI as base? Thought about using Dual Patcher with this as a second.
Click to expand...
Click to collapse
yes u need to stock rom base android 7. later u can install this rom.
KaptanHarlock said:
Post updated.
Multilang v1 added
Click to expand...
Click to collapse
Thx for this
KaptanHarlock said:
yes u need to stock rom base android 7. later u can install this rom.
Click to expand...
Click to collapse
Coming from RR 5.8.3.
Full wipe
Install v1 zip
Booting
Mi logo appear, 3 dots moving at the bottom
After 20-30 min still the same
Not fully booting
So coming from ZUI is a must?
From custom rom impossible?
Thanks
hubushubus said:
Coming from RR 5.8.3.
Full wipe
Install v1 zip
Booting
Mi logo appear, 3 dots moving at the bottom
After 20-30 min still the same
Not fully booting
So coming from ZUI is a must?
From custom rom impossible?
Thanks
Click to expand...
Click to collapse
u need to install stock zui nougat