Can anyone help me with the steps to update to Android Oreo (OOS 5) from OOS 4.5.1 retaining root?
Below are the current setup of my phone
Rooted - Yes (Magisk version 14.0)
Recovery - TWRP version 3.1.1-2
Current Rom - Stock OOS 4.5.1
I haven't had any problems in updating earlier but now when I try to flash the full oreo rom from TWRP, I am getting error 7.
Below are the steps I followed.
Downloaded the full OTA zip.
Rebooted to recovery.
Unistalled Magisk.
Tried to flash the Oreo OTA zip. At this point TWRP showed error 7.
Reinstalled Magisk and rebooted to system.
Phone is working fine.
you need to use latest twrp for oreo, for example blue spark version, search for it on xda...
Follow this guide here:
https://forums.oneplus.net/threads/how-to-install-oos-5-0-over-rooted-4-5-1.684519/#post-17134194
It's exactly what you need.
All Oreo ROM threads clearly state under the "Instructions" heading, that you need either AkhilNarangs Modified TWRP or Blu_Sparks TWRP V50. Using stock TWRP would result in an error.
If the error may still persist, try flashing a different firmware.
Just to get some more clarity.
I have the original OTA full zip. Should I download the zip file from your thread?
Can I install the custom version of TWRP using the official TWRP app? I am bit confused on how to install it.
Is it important that I should use Magisk 14.3 or will v 14 have the same effect?
Hey there,
I can tell you how I have done it yesterday (successfully).
1. Update TWRP - I prefer blu sparks version 8.52 (Link: https://forum.xda-developers.com/devdb/project/dl/?id=27225); you can do it by using your installed TWRP Version (Install .img)
2. Dirty flash OOS 4.5.1 again (to remove root / magisk) - once finished DO NOT reboot into system, reboot into Recovery/TWRP to verify the new version and afterwards to system
3. flash OOS 5.0 (Oreo) - dirty flash is okay
4. flash magisk Version 14.3
These are the steps I have followed yesterday and all is running perfect and without any problems.
BR
Which recovery is mentioned in this linked discussion resp. in the linked download? Is it blu_spark TWRP?
Regards
Clark
This worked perfectly for me.
Glad to hear that everything is good ?
I did the same and I was suddenly encrypted and no chance to get my data back. Still forcing clean my phone because I cannot format the device. I get always an error message in TWRP like: unable to format to remove encryption
I go crazy...
Enter recovery and wipe data and then cache.
Then reflash the rom and probably you will be good to go.
Update: A working solution is listed below for reference.
A detailed tutorial for encrypted and rooted Nougat OOS users on how to flash Oreo OxygenOS without running into the infamous boot loop issue.
Step 1: Remove all fingerprint & pin from the device
Step 2: Backup everything on your PC/Laptop
Step 3: Reboot the device to TWRP bootloader
Step 4: Using a PC/Laptop, flash Blu_Spark TWRP via ADB command
Step 5: Reboot device to TWRP
Step 6: Wipe dalvik, cache, system & internal partition
Step 7: Format device
Step 8: Copy Oreo Rom & no_verity_mod file onto your device
Step 9: Flash Oreo under TWRP
Step 10: Flash TWRP again
Step 11: Reboot to recovery again
Step 12: Flash Magisk Beta for root (I used Magisk beta 14.5)
Step 13: Flash no_verity_mod file
Step 14: Reboot into Oreo Oxygen OS
Your device is now decrypted, rooted and running the latest stable Oreo OxygenOS build.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Seeing as a couple of forum members have messaged me regarding the official update of Android Oreo, I would like to make a proper discussion thread for it.
I just want to make it clear that HatRiGt has made an outstanding effort by making a tutorial thread. -> ([OFFICIAL] [Stable Oreo 8 ] Oxygen OS 5.0 Update [Tutorial-Root] [Mirror] by HatRiGt)
With that said, I believe the title is somewhat misleading. Since a lot of members are under the impression that this Oreo update will be a simple and straightforward process like all previous Nougat updates, except for it's not.
Stock OxygenOS
Rooted with Magisk v14
TWRP Recovery
Device already encrypted
Almost everyone with the device configuration listed above has run into some sort of serious issues, such as boot loop, file system decrypted/corrupted, or a complete data loss.
So far, it seems like the few groups of members that have managed to update their device without any data loss are either users that have flashed the Oreo Beta rom, or users with a non-rooted & stock recovery device. Almost everyone else is facing some form of issues.
I understand that some people have suggested that rooted users should first format the internal storage, before proceeding with the Oreo update. I personally feel that it is an inconvenient method of OS update, since many of us have a huge collection of photos, media files and app settings etc... to worry about.
The purpose of this thread is to address the aforementioned problem for rooted OOS users and to come up with a solution, so that everyone can enjoy this latest stable release of Android Oreo.
Any comments or thoughts are welcomed.
Maybe a stupid idea, but I am a bit noobish in this. Running stock 4.5.15, rooted, K2 TWRP and Magisk.
Is it not an option to just flash stock recovery (via ADB or Root Toolcase), then remove/deinstall Magisk and use the OTA update? After that flash Blue Spark via ADB, reflash Magisk and be good to go?
Unfortunately this is my daily driver company phone so I haven't the time to experiment with it at the moment.
I had some issues trying to dirty flash mine. Didn't know about others' troubles until after the fact.
I ended up with the black screen and blue notification LED. Everything encrypted and unable to go anywhere in recovery mode. Had to do a full wipe and image load; I also am not sure if I had been running my backups for a while, so this could be a lesson learned.
Malcol13 said:
I had some issues trying to dirty flash mine. Didn't know about others' troubles until after the fact.
I ended up with the black screen and blue notification LED. Everything encrypted and unable to go anywhere in recovery mode. Had to do a full wipe and image load; I also am not sure if I had been running my backups for a while, so this could be a lesson learned.
Click to expand...
Click to collapse
Still experiencing the exact same problem.
The problem is, I can't transfer the zip to my phone to flash.
Under TWRP, any computer recognizes it as a mass storage, but even with adb push/sideload it doesn't work.
Does a full wipe help with that problem?
DionysosD said:
Still experiencing the exact same problem.
The problem is, I can't transfer the zip to my phone to flash.
Under TWRP, any computer recognizes it as a mass storage, but even with adb push/sideload it doesn't work.
Does a full wipe help with that problem?
Click to expand...
Click to collapse
I saw the same thing. Unable to copy the zip file until I did the full wipe, which means no chance of recovering what was on it, but I'm cutting my losses.
I'm now stuck on the configuration stage, it's just sitting on "Just a sec..." for forever it would seem. Trying to update on Christmas day was a bad decision.
Root *shouldn't* cause issues. But that really depends on what has been changed by root
Twrp will though.
Flashing stock recovery should allow the ota to work without issues.
Having said that it's a major update so factory reset isn't a bad idea anyway.
fards said:
Root *shouldn't* cause issues. But that really depends on what has been changed by root
Twrp will though.
Flashing stock recovery should allow the ota to work without issues.
Having said that it's a major update so factory reset isn't a bad idea anyway.
Click to expand...
Click to collapse
I had the same idea, encrypted, rooted (no system modifications) and running twrp, I flashed stock OP5 recovery, and updated through the ota and ended up in a bootloop.
I did a nandroid to a usb before updating, but I still lost all internal storage files
so...the no verity is only for decrypted users right?
fards said:
Flashing stock recovery should allow the ota to work without issues.
Having said that it's a major update so factory reset isn't a bad idea anyway.
Click to expand...
Click to collapse
I appreciated the suggestion, but there are a lot of users with loads of files stored on the device, along with various other app settings, having to wipe the storage or perform a factory reset can be really troublesome. I believe that OnePlus pushed through this stable OTA update with the intention of a seamless update. Endless boot loops and data loss wouldn't be an ideal method of an OS update.
The way I installed the beta 2, was removing the pin and fingerprint before installing magisk through Twrp, at first I got stuck with bootloop, but made it come back to life after installing the ota through Twrp and booting back, removing my pin and then installing magisk.
igoorsoouza said:
The way I installed the beta 2, was removing the pin and fingerprint before installing magisk through Twrp, at first I got stuck with bootloop, but made it come back to life after installing the ota through Twrp and booting back, removing my pin and then installing magisk.
Click to expand...
Click to collapse
Okay, so I've been thinking that maybe it's possible for us rooted Nougat OOS users to update to Oreo stable release without any form of data loss.
I've listed the steps to avoid any potential confusions.
You start with stock Nougat OxygenOS (Encrypted) with Magisk v14 (root) and non-Oreo compatible TWRP (e.g TWRP 3.1.1.1)
Flash an Oreo compatible TWRP (e.g Blu_Spark TWRP)
Boot up the new Oreo compatible TWRP
Flash OreoBeta 2
The phone should boot up OreoBeta 2 without any data loss
Dirty flash the official Oreo stable release via the new Oreo compatible TWRP
Flash Oreo compatible TWRP again
Flash Magisk beta for root access
Flash No-verity file
So the basic order of flashing should be Nougat OOS -> OreoBeta -> Oreo Stable
Any thoughts on this?
Are you sure flashing Open beta2 won't compromise the internal storage? I bet no one affords to loose previous photos, apps, settings, etc without full backup.
I've triyed this. All good till i flash 5.0 & Magisk & no verity....
Hello there and Merry Christmas.
I faced to this issue too, fortunately before to update to Oreo. I made a full backup of my data.
My OP5 was running under Oxygen OS 4.5.15 Nougat 7.1.1
Rooted with Magisk V14.5
TWRP Blue_Spark 3.1.1
First I have updated my TWRP to Blue_Spark 3.2
And then I've installed Oreo Oxygen OS 5.0 from TWRP with the full zip.
After the update, my op5 has been bricked and locked on blank black screen with a blue led.
To unbrick my phone I used a tiers softwate to install Hydrogen OS first.
After that I could installed TWRP Blue_Spark 3.2 and then flash to the full zip Oreo Oxygen OS 5.0
My OP5 works as well but...
Right now I'm blocked, Google who usually sends an SMS, does not offer me. Only the authentificatorator or the security code. : /
Be careful, print a Google code to access your account when you go to install Oreo.
I'm waiting for Google to do the right thing.
Hi,
I have a boot loop on my OP5.
I ddirty flashed Oreo and had twrp/magisk.
Any ideas to recover my data partition ? (I had fingerprint/pin)
Best regards,
1) What is that "no-verity" file?
2) Isn't the regular TWRP 3.2.0 good with Oreo?
MadCow809 said:
Okay, so I've been thinking that maybe it's possible for us rooted Nougat OOS users to update to Oreo stable release without any form of data loss.
I've listed the steps to avoid any potential confusions.
You start with stock Nougat OxygenOS (Encrypted) with Magisk v14 (root) and non-Oreo compatible TWRP (e.g TWRP 3.1.1.1)
Flash an Oreo compatible TWRP (e.g Blu_Spark TWRP)
Boot up the new Oreo compatible TWRP
Flash OreoBeta 2
The phone should boot up OreoBeta 2 without any data loss
Dirty flash the official Oreo stable release via the new Oreo compatible TWRP
Flash Oreo compatible TWRP again
Flash Magisk beta for root access
Flash No-verity file
So the basic order of flashing should be Nougat OOS -> OreoBeta -> Oreo Stable
Any thoughts on this?
Click to expand...
Click to collapse
Isn't a full wipe required even for Oreo Beta builds? Also thanks for starting this thread I'm really eager to jump into Oreo but would love it if no wipe happened.
BenSow said:
Isn't a full wipe required even for Oreo Beta builds? Also thanks for starting this thread I'm really eager to jump into Oreo but would love it if no wipe happened.
Click to expand...
Click to collapse
I think it's possible to flash the Oreo Beta without a full wipe. And yeah, I've got way too much stuff on my device, so I can't afford to wipe my storage.
MadCow809 said:
I appreciated the suggestion, but there are a lot of users with loads of files stored on the device, along with various other app settings, having to wipe the storage or perform a factory reset can be really troublesome. I believe that OnePlus pushed through this stable OTA update with the intention of a seamless update. Endless boot loops and data loss wouldn't be an ideal method of an OS update.
Click to expand...
Click to collapse
I never suggested either.
Oneplus don't test using twrp or using root.
Their prescribed ota route, as pretty much every other OEM, is unmodified system partition using stock bootloader.
Twrp or root will affect those and can cause bootloops.
Obviously there's a chance with so much diversity in installs that there can be an issue arises.
raboliot said:
Hi,
I have a boot loop on my OP5.
I ddirty flashed Oreo and had twrp/magisk.
Any ideas to recover my data partition ? (I had fingerprint/pin)
Best regards,
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-5/how-to/guide-restore-data-stuck-bootloop-n-o-t3724515
Read it all.
I have a Encrypted phone and I was able to recover all.
Actually I was able to restore my Nandroid backup.
So... was tired of some miscellaneous issues with 4.5.0 (rooted w/ Magisk, TWRP recovery) and decided to finally jump to 5.0. Failed initially in TWRP (was using stock 3.1.xx), moved to the OOS internal upgrade option, and actually managed to boot into 5.0 (albeit stock recovery and no root) after that succeeded.
Powered off, connected to PC, fastboot flashed TWRP 3.1.1 blu spark, rebooted into recovery, reflashed blue spark img, flashed OnePlus3TOxygen_28_OTA_060_all_1711160447.zip (went fine AFAIK, "script succeeded, 1.0000"). Cleared Dalvik/cache, flashed SuperSU v2.82... and this is where things got weird. First, flashing SuperSU failed once at the point of compressing the ramdisk. rebooted into TWRP, tried again, and it finished without error messages. Wiped Dalvik/cache once more and rebooted. This time, I got a permanent boot where my OP3T appeared to freeze at the first OP logo on a black background and would go no further even after 10+ minutes. Swapped out my SuperSU zip with a download straight from their website, same frozen boot. Redownloaded OTA_060_all, same thing. Wiped dalvik/cache/system before each attempt, no luck.
Gave up, fastboot -w, reflashed TWRP blu spark, and now even just drying to flash the plain OTA_060 zip results in a "no OS installed" when I try to reboot. When I try to flash either Magisk v15 or SuperSU 2.82, TWRP freezes entirely in the first steps, crashes to a white notification icon, and requires a long power button hold to reboot. I am lost at this point. AFAIK, my OP3T is basically a blank, wiped slate, and I've never experienced full-on TWRP freezes while flashing before blu spark.
In the meantime, I've installed OTA_057 (4.5.1) instead, thankfully without a bootloop, but fully wiped any suggestions?
I've jumped from Nougat to Oreo too. These are my steps: while on nougat open the TWRP recovery (stock TWRP); MAKE A COMPLETE BACKUP; updated it to the latest version (3.2.1.0.- if you have it installed then there's no need for this step); complete wipe; install the OTA using USB OTG; boot to system; run the first setup; (now TWRP might got overwritten just reboot to recovery, if it reboots to TWRP great, move on, if not then reboot to system and install TWRP using ADB); reboot to TWRP recovery; flash Magisk 15 (or SuperSU, but I don't use it so I can't say if it works); flash kernel if you want; reboot to system; check if Magisk/SuperSU works and that's it. At this point I've made another complete backup just in case I skrew up something in the future. Hope I helped! Good luck!
Are you using supersu 2.82 SR5.
I had same problem with my 3T going from nougat to oreo.
Tagtag123 said:
Are you using supersu 2.82 SR5.
I had same problem with my 3T going from nougat to oreo.
Click to expand...
Click to collapse
Yep, I believe that's exactly the version I tried I eventually just gave up after doing the complete device wipe through fastboot commands, am now running 5.0 with no problems but have the stock recovery and am not rooted :/ Now I just need to make a backup and then I can mess around and try and find a root method that doesn't basically soft brick my phone...
Even I am running OOS 5.0
The way I rooted is:
Flashed oos 5.0 using TWRP (https://forum.xda-developers.com/devdb/project/dl/?id=27381&task=get)
Boot normally
Reboot to TWRP, flash TWRP using fastboot if you find stock recovery. Then boot to TWRP.
After you in the TWRP recovery, flash superSU 2.82 SR5
Then flash suhide (it helps you hide root from apps which are a bit finicky about root).
This works for me.
SuperSU v2.82-SR5 flashable ZIP:
http://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
suhide v1.09 flashable ZIP:
http://download.chainfire.eu/1219/suhide/UPDATE-suhide-v1.09-20171001222116.zip
I just followed these steps coming from rooted 4.5.1 and worked perfectly.
https://forums.oneplus.net/threads/guide-how-to-install-oos-5-0-over-rooted-4-5-1.684519/
Unleashed by my rooted OP3T in 8.0
I was running a custom ROM (Skydragon) earlier. I simply booted into TWRP, did the basic wipe then flashed the official zip file. Then after booting, its stuck on the boot animation for more than 20 minutes now. Any ideas how to resolve this?
I too faced the same issue. formating the data partition and flashing community beta build booted successfully for me. before you do this, completely back your phone contents to pc
You must flash with TWRP 3.2.3.0 or older!
i had the same issue. formated data had 3.3.0 twrp but still bootloop so i used unbrick tool to put my phone back to stock and then updated to last build though stock recovery and then unlocked bootloader, installed twrp, magisk and done.
Hi,
I made a backup using TWRP a couple of weeks ago of my custom ROM.
I attempted to restore this backup using TWRP Recovery today and after it restores and reboots, it always gets stuck on download mode. Prior to restoring, the system was working fine, with the Magisk image file (that comes with the custom rom) installed in the boot partition. I have also attempted to flash this file after restoring, no luck.
Any help is appreciated and please let me know what details I'm missing that can help with this issue.
I know there is an update available for TWRP (3.4.0), wondering if that would fix the issue.
Device: Galaxy S10+ Exynos (G975F)
Custom Rom: Lineage OS 17.1 with open_gapps-arm64 super
TWRP Version: 3.3.1-104_ianmacd
Magisk: 20.4
Update:
Solution: Restore backup without any image backup
Thanks to @[email protected],
found on this https://forum.xda-developers.com/ga...pdate-2020-t4067765/post82393905#post82393905
Help
I'm in the same trouble