Database Develop

[Q]Repair Headphone Jack

Huhu,
some weeks ago it start that i had problems with my headphone jack. sometimes it stops playing music when it get touched while i put it in the pants. and now i can be happy if the smartphone register 1 of 100 times i connect my headphones.
someone of u ever had the same problem and repair it himself?
pls let me know because that s*ck ;] and sry my bad english

I think the best and easiest thing to do to fix this is take it in and have them replace it.

Get the pocket lint out. Seriously, lol. Mine was doing the same thing, so I looked in it with a really bright flashlight and saw pocket lint pressed against the bottom
Sent from my XT862 using XDA App

i also had one in but putting him out not help ;()

Repair Headphone Jack
Had problems with D1 phone jack, and D3 also. To me it is a matter of thickness of the male jack. I have real nice Sony ear buds but the jack cuts out, move it and is good for short while. I pinched the jack to make it oblong, very desperate move. Cuts out much less, but still kinda crapy. I have an older Sony ear buds and the jack is thicker and have no problems. Even at the gym.
Bottom line is cheesy, cheap parts there on that Motorola.

Cameron6472 said:
Get the pocket lint out. Seriously, lol. Mine was doing the same thing, so I looked in it with a really bright flashlight and saw pocket lint pressed against the bottom
Sent from my XT862 using XDA App
Click to expand...
Click to collapse
+1
This happened to me twice. So, I guess that should be +2!
The plug would stop snapping in. I thought for sure I had broken the jack. But after a little close inspection, a flashlight, toothpick and can of duster I was able to get it working good as new again.

some days ago i was looking around the internet and find these
http://www.ifixit.com/Teardown/Motorola-Droid-3-Teardown/6108/1
so some days later i was funny enough to open my Droid3, too.
and then i was able to get some more pocket lins out of the headphonejack.
i was thinking its already clean but these wasnt visible from the top.
and now all is woorking fine

How I fixed my back speakers

Well...ever since I bought my vivid (used from some guy on craigslist) the back speakers sounded like crap...like any sound even at the lowest volume was distorted/crackaly sounding...especialy high notes and singing...
So today, while I was waiting for a repo sync to complete for cm10 I decided to take apart my vivid and see how the speaker is connected and if its possible to replace it...
So after I took the casing off my phone I found that the speaker was easy to remove. So I took it off and turned it over to look at it with out the (mesh?) Covering or whatever you wanna call it...
As soon as I turned it over I was shocked, there were a bunch of tiny metal shaving stuck to the speaker (most speakers use magnets so that's why they were stuck...how they got inside the phone is a mystery though...) like there was enough on there to cover an 1/8 of the speaker...
So I grabbed a magnet and slid it back and forth over the speaker, this took off all the shavings since my magnet was stronger then the one in the speaker
I put my phone back together and for the first time ever, playing music out of the back speaker actually sounds decent (for a phone...)
In short...
1) Took my phone apart
2) Extracted my back speaker
3) Noticed there were metal shavings stuck to it
4) Removed metal shaving with strong magnet
5) Put phone back together
I know most people wpuldnt open up there phone...but I figured maybe someone else has a bad sounding speaker, maybe they might wanna see if this was there problem...
If anyone is interested I can make a video tutorial on what I did...
Sent from my HTC PH39100 using Tapatalk 2

Being a pipefitter I had to the same lol. I had my phone in my carhartts everyday and when I was grinding it would attach like nothing . Welder would be the same . Your right its so much better but most people won't have metal shavings. I'm having a problem now with most kernals getting the front speaker loud enough . Have to push hard on my head to hear it . And I had thY apart aswelll .

Galaxy S4 Active - is it really waterproof?

USA Today have an article (here) where the reviewer was testing the S4 Active. Right after he dunk the phone underwater, the phone have WATER DAMAGE:
Shortly after I took the phone for a dip (in not very deep water), the display went kaput — at least for several hours. It lit up just long enough to indicate that I had power, but I couldn't actually keep the display on and use it.
Roughly a day later, the screen came alive again, but the phone was still exhibiting finicky behavior, presumably because of water damage. The touch-screen was messed up and the device acted as if headphones were plugged in when they weren't. If this were my actual phone, I'd return to the store for a replacement.
I just got the S4 Active and thought I am not planning to take the phone for a long underwater activities, I am concerned that I am getting a phone that have a very weak water resistant feature.
Not sure if this is because the reviewer didn't "properly" close the battery cover / USB port, but I have seen S4 Active review and Samsung Event videos where the phone was submerged in water for a long time and it still works.
PS: Have ANYONE tried to dunk their phone in the water for testing?

My phone has been in a pool, lake, bathtub, rainy weather, all since I got it. I trust it.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 2

I'd like to think that reviewer just got stuck with a bad unit.
But this begs the question: Is water damage covered under warranty? Either by AT&T or Samsung? Surely they should back up their "vacation-proof" phone..

aceownstheworld said:
My phone has been in a pool, lake, bathtub, rainy weather, all since I got it. I trust it.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 2
Click to expand...
Click to collapse
My first one went into the pool just fine. The unit I have now I am scared to expose it. On the top between the glass and bezel there is a small gap... above the in call speaker.... I'm afraid that water will pour in through that... Can you look at yours and see if yours is like that?

He probably didn't press down the back cover correctly.
Sent From My Galaxy S4 Active using a Tapatalk 4

joshuadjohnson22 said:
My first one went into the pool just fine. The unit I have now I am scared to expose it. On the top between the glass and bezel there is a small gap... above the in call speaker.... I'm afraid that water will pour in through that... Can you look at yours and see if yours is like that?
Click to expand...
Click to collapse
You mean between the earpiece and the bezel at the front? I don't see any gaps, at least not with my naked eyes.
On the back, bottom part near the speaker, I don't see it either. Trying to press to see if there is a gap, so far none.
What makes you "scared" on the phone that you have now?

robstunner said:
He probably didn't press down the back cover correctly.
Sent From My Galaxy S4 Active using a Tapatalk 4
Click to expand...
Click to collapse
There is a sticker on the back cover that provide a warning for the user to PRESS DOWN on the middle of the cover, underneath the LED.
I always do that, but I never hear a "click" or any indication that the back cover is now PROPERLY covering the phone to prevent water leakage.
Well, I DO hear the click when pressing on all sides, but that's normal like my Galaxy Note.

lanwarrior said:
You mean between the earpiece and the bezel at the front? I don't see any gaps, at least not with my naked eyes.
On the back, bottom part near the speaker, I don't see it either. Trying to press to see if there is a gap, so far none.
What makes you "scared" on the phone that you have now?
Click to expand...
Click to collapse
Yeah on the front top. I just think water will easily get in the phone...
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4 Beta

I've used this phone below the 1 meter mark and the only bad side effect I get is the microphone not working well for a bit afterwords, which happens really at any level of exposure. This phone is pretty safe in water if you use it correctly.

mattpayne92 said:
...the only bad side effect I get is the microphone not working well for a bit afterwords...
Click to expand...
Click to collapse
That is pretty bad. I mean, I am not going snorkeling and take a phone call while floating on the shore, but if somebody calls me and I CANNOT talk to them because the microphone does not work, that is a big problem.
I am actually wondering how does the phone protects the microphone, earphone and speaker? There are holes there and water can go in. I was considering the Xperia Z and so far the only problem with water issue is the microphone jack - the phone will think that the jack have a headphone but it's only water. However, that is easily fixable by drying it out. I.e. use tissue or something that goes inside the jack.
Microphone though, the holes are to tiny to "dry" with a tissue or something.
BTW, is the microphone STOPS working completely or it works again after a FEW DAYS?

Maybe I can ask those who read this thread to tell me if:
A). You HAVE tested your phone under water (splashing it, dunking it in a bowl of water)
B). What ISSUE you have after you did the above? Phone dead, microphone stops working, etc.
I am trying to get a sense if this is just a specific batch issue (I can replace the phone) or design issue (no matter what, the issue still exists).

If it really was then it would have lifetime warranty. The fact that it only has 1 year warranty like most of the phones tells me that after year 1 be ready to say bye bye to your baby
Sent from my SGH-I337

lanwarrior said:
Maybe I can ask those who read this thread to tell me if:
A). You HAVE tested your phone under water (splashing it, dunking it in a bowl of water)
B). What ISSUE you have after you did the above? Phone dead, microphone stops working, etc.
I am trying to get a sense if this is just a specific batch issue (I can replace the phone) or design issue (no matter what, the issue still exists).
Click to expand...
Click to collapse
Decided to take mine in the shower to test after it got here.
I let the showerhead spray onto the phone, both front and back. Nothing wrong.
Like other people reported, the speaker volume gets significantly lower when wet and goes back to normal within a half hour. Also if the headphone port gets water in it it will errenously display that "headphones are connected" which blowing into the port will fix.

thatbigmoose said:
Decided to take mine in the shower to test after it got here.
I let the showerhead spray onto the phone, both front and back. Nothing wrong.
Like other people reported, the speaker volume gets significantly lower when wet and goes back to normal within a half hour. Also if the headphone port gets water in it it will errenously display that "headphones are connected" which blowing into the port will fix.
Click to expand...
Click to collapse
This is useful! BTW, you haven't test submerging the phone, have you?

maldinimi said:
If it really was then it would have lifetime warranty. The fact that it only has 1 year warranty like most of the phones tells me that after year 1 be ready to say bye bye to your baby
Sent from my SGH-I337
Click to expand...
Click to collapse
No it won't, because all things mechanical / electronics break downs eventually - nothing last forever. Even mil-spec stuff does not have a "lifetime" warranty.

lanwarrior said:
This is useful! BTW, you haven't test submerging the phone, have you?
Click to expand...
Click to collapse
I haven't submersed it yet but there's videos on YouTube with submersion and it brings about the same issues I discussed.
Higher water pressure will clog the mic membrane and make you sound distant in phone calls.
Maybe I'll build up the courage to dunk it tomorrow.

I did the dunk test the night after I got it by fully submerging it in a cup of water...worked just fine afterwards...although I was showing a friend that didn't believe that I had a "water proof/resistant" phone by putting it in the sink and letting water run over it and had an issue with the phone thinking the headphones were plugged in.only did it for about an hour...weird thing was that it didn't start doing it until about 2 hours after it had been wet. Although once it fully dried I haven't had any issues at all with it. Hope this helps.
Sent from my GT-N5110 using XDA Premium HD app

lanwarrior said:
That is pretty bad. I mean, I am not going snorkeling and take a phone call while floating on the shore, but if somebody calls me and I CANNOT talk to them because the microphone does not work, that is a big problem.
I am actually wondering how does the phone protects the microphone, earphone and speaker? There are holes there and water can go in. I was considering the Xperia Z and so far the only problem with water issue is the microphone jack - the phone will think that the jack have a headphone but it's only water. However, that is easily fixable by drying it out. I.e. use tissue or something that goes inside the jack.
Microphone though, the holes are to tiny to "dry" with a tissue or something.
BTW, is the microphone STOPS working completely or it works again after a FEW DAYS?
Click to expand...
Click to collapse
Maybe leave the phone in the sun for a few minutes to dry? Blow on it? Several things help get the water out. But honestly, how often are you going to go swimming with a phone and then take a call immediately afterwards? I'd be thrilled that my phone didn't fry after it fell in the pool, I could care less that the microphone doesn't work for an hour - that's what bluetooth headsets are for.
Anyways, I've had my phone submerged in a sink with running water twice now, the only issues I've found is that after removing the back cover there is water on the outside of the rubber gasket, which looks normal, but I would recommend taking the back off to dry it out after exposed to water.

When i took mine into the pool I made a phone call right after and they said I sounded funny so i blew in the mic and it cleared the water out and they could hear me fine....

geoff5093 said:
But honestly, how often are you going to go swimming with a phone and then take a call immediately afterwards?
Click to expand...
Click to collapse
Not very often, but when I DO need to take that call, it will be a big problem. This is a phone after all.
I don't think I will purposely take the phone for a swim, but the reason I bought the Active instead of the S4 is because of the water/sand protection and want to confirm it works. If it doesn't, then I'll exchange the phone to a normal S4 because it's thinner.
However, based on your response and others, it seems it does offer those protection to a certain degree and the ONLY issue is that the mic may get covered with water and cause the caller not being able to hear me, but this is easily fixed QUICKLY.

[Q] HTC One - Hardware repair nightmare - started with blurry camera.

Hope someone on here can help me; I've searched everywhere can could not find a solution. The technician who worked on the phone for over 10-15 hours over 1 month looked at me in despair and said "I have no clue"; I thought he was going to start crying.
Everything but the camera worked perfectly before the technician opened the phone to start working in it a month ago. It went downhill from there.
Sequence of events
1. Had a camera problem (constantly out of focus) on my US HTC One Dev edition that started 6 months after owning the phone, which I absolutely loved. Searched and found this was a hardware issue.
2. I'm in Canada with a US phone, so no warranty. HTC wants $200 and 3-6 weeks to fix it. Local shop wants $75. After asking if they knew how to fix this specific phone and that they had the tools, I leave it with them.
3. They installed the new camera, damaged my top speaker grille and phone side, and the screen is uneven (technician: worst phone I have ever seen to repair) If you want an idea of the process have a look at the ifixit website.
4. I order top grille for replacement ($10) from ebay. I realize the screen is has not been properly installed and after 2 days I have a purple dead pixel.
5. I leave for a trip with my family over the Holidays - I start taking photos in low light, guess what? Damn purple issue starts. The new camera was an omnivision from a bad batch (pre-Nov 2013). Fortunately, as a true geek I brought another camera with me, just in case.
6. I order a new camera myself from etradesupply $30 plus $20 shippling = $50. 2 more weeks go by.
7. I receive the grille and get the phone back to the technician, he puts it back together, but the grille won't bend and stick to the phone.
8. New camera arrives and Iget the phone back to the technician to install it, which he does.
9. I come back to pick up the phone - screen is all pixelated and dies shortly thereafter.
10. Technician proposes to swap screen from a bricked One he has from another customer. I hesitate, but agree; just want a working phone already. Donnor phone is pretty much destroyed in the process.
11. Back at the shop to pick up my phone: everything finally looks great. I realize back home that the sim card cannot be detected, and that the speakers make a bad creakling noise when volume is higher than 8 or 9 or at normal levels during a phone call
12. Back at the shop - he fixes the sim card issue (pooly connected wire), speaker issue remains and we have no clue where it's coming from. That's were we are at.
Lessons learned for both of us:
The HTC One is a fantastic phone...until it breaks.
technicians should refuse to repair the HTC One, it's almost guaranteed that they will damage something
I should have sent the phone to HTC for 4 weeks paid $200, pay $100 for a loaner phone and be done with the problem...
Problem description
Problem is blatant when volume is at 8 or 9 or more, but is also there at lower volumes, and during phone calls at any volume, there is a creaking noise from the speakers mostly top one. When we press on the grilles the problem is slightly better.
When the whole phone (electronics) was outside the aluminum unibody frame the noise would stop. As soon as we inserted the top end of the phone assembly into the aluminum frame the noise started.
When beatsaudio is off problem is not as bad.
We inspected the motherboard, daughterboard, casing, speakers and everything looks fine (i.e. nothing broken or missing).
Questions
1. Speaker worked perfectly before the technician swapped the screen and reassembled the phone. It's kind of odd that both speakers started having the same issue at the same time. Is it worth trying to replace the speakers with new ones?
2. Could it be interference from something that was not properly put together?
3. Should I use the phone as a hammer, throw it as far as I can from the top of a 30-story building, in a river from a dam, put it in a bucket filled with fuel, or tie it to a propane tank and shot a bullet into it?
Thanks so much for any help!

fujisan582 said:
Hope someone on here can help me; I've searched everywhere can could not find a solution. The technician who worked on the phone for over 10-15 hours over 1 month looked at me in despair and said "I have no clue"; I thought he was going to start crying.
Everything but the camera worked perfectly before the technician opened the phone to start working in it a month ago. It went downhill from there.
Sequence of events
1. Had a camera problem (constantly out of focus) on my US HTC One Dev edition that started 6 months after owning the phone, which I absolutely loved. Searched and found this was a hardware issue.
2. I'm in Canada with a US phone, so no warranty. HTC wants $200 and 3-6 weeks to fix it. Local shop wants $75. After asking if they knew how to fix this specific phone and that they had the tools, I leave it with them.
3. They installed the new camera, damaged my top speaker grille and phone side, and the screen is uneven (technician: worst phone I have ever seen to repair) If you want an idea of the process have a look at the ifixit website.
4. I order top grille for replacement ($10) from ebay. I realize the screen is has not been properly installed and after 2 days I have a purple dead pixel.
5. I leave for a trip with my family over the Holidays - I start taking photos in low light, guess what? Damn purple issue starts. The new camera was an omnivision from a bad batch (pre-Nov 2013). Fortunately, as a true geek I brought another camera with me, just in case.
6. I order a new camera myself from etradesupply $30 plus $20 shippling = $50. 2 more weeks go by.
7. I receive the grille and get the phone back to the technician, he puts it back together, but the grille won't bend and stick to the phone.
8. New camera arrives and Iget the phone back to the technician to install it, which he does.
9. I come back to pick up the phone - screen is all pixelated and dies shortly thereafter.
10. Technician proposes to swap screen from a bricked One he has from another customer. I hesitate, but agree; just want a working phone already. Donnor phone is pretty much destroyed in the process.
11. Back at the shop to pick up my phone: everything finally looks great. I realize back home that the sim card cannot be detected, and that the speakers make a bad creakling noise when volume is higher than 8 or 9 or at normal levels during a phone call
12. Back at the shop - he fixes the sim card issue (pooly connected wire), speaker issue remains and we have no clue where it's coming from. That's were we are at.
Lessons learned for both of us:
The HTC One is a fantastic phone...until it breaks.
technicians should refuse to repair the HTC One, it's almost guaranteed that they will damage something
I should have sent the phone to HTC for 4 weeks paid $200, pay $100 for a loaner phone and be done with the problem...
Problem description
Problem is blatant when volume is at 8 or 9 or more, but is also there at lower volumes, and during phone calls at any volume, there is a creaking noise from the speakers mostly top one. When we press on the grilles the problem is slightly better.
When the whole phone (electronics) was outside the aluminum unibody frame the noise would stop. As soon as we inserted the top end of the phone assembly into the aluminum frame the noise started.
When beatsaudio is off problem is not as bad.
We inspected the motherboard, daughterboard, casing, speakers and everything looks fine (i.e. nothing broken or missing).
Questions
1. Speaker worked perfectly before the technician swapped the screen and reassembled the phone. It's kind of odd that both speakers started having the same issue at the same time. Is it worth trying to replace the speakers with new ones?
2. Could it be interference from something that was not properly put together?
3. Should I use the phone as a hammer, throw it as far as I can from the top of a 30-story building, in a river from a dam, put it in a bucket filled with fuel, or tie it to a propane tank and shot a bullet into it?
Thanks so much for any help!
Click to expand...
Click to collapse
Wow.. Just wow... Looks like your speaker grills haven't been put in properly.. Did he replace only the LCD or the LCD+front housing?
Sent from my HTC One using Tapatalk

Most likely a bad speaker placement. It sounds to me that the "technician" didn't place the speakers properly and it probably is now always in contact with the aluminium grills. That will cause weird audio creaking noise as the speaker vibrations are vibrating the aluminium grills as well. That's why if you press on the speaker grills, it will stop that extra vibration from the speaker grills. Beats Audio will just make more vibrations in the speakers and worsen your problem.
I suggest you find another "technician" because the one you went to is clearly stupid.

Thanks for the replies!
n1234d said:
Wow.. Just wow... Looks like your speaker grills haven't been put in properly.. Did he replace only the LCD or the LCD+front housing?
Click to expand...
Click to collapse
He replaced the full front housing to make sure we would not have problems fitting the speaker grills again.
ZeroInfinity said:
Most likely a bad speaker placement. It sounds to me that the "technician" didn't place the speakers properly and it probably is now always in contact with the aluminium grills. That will cause weird audio creaking noise as the speaker vibrations are vibrating the aluminium grills as well. That's why if you press on the speaker grills, it will stop that extra vibration from the speaker grills. Beats Audio will just make more vibrations in the speakers and worsen your problem.
I suggest you find another "technician" because the one you went to is clearly stupid.
Click to expand...
Click to collapse
Sounds like you are on to something. I got a similar answer on ifixit where I posted the issue.
Will get the guy to open my one up again and make sure the speaker is properly in place before ordering a new one. These suckers are $2, but shipping from HongKong is $23!
Thanks again for your help!

ZeroInfinity said:
Most likely a bad speaker placement. It sounds to me that the "technician" didn't place the speakers properly and it probably is now always in contact with the aluminium grills. That will cause weird audio creaking noise as the speaker vibrations are vibrating the aluminium grills as well. That's why if you press on the speaker grills, it will stop that extra vibration from the speaker grills. Beats Audio will just make more vibrations in the speakers and worsen your problem.
I suggest you find another "technician" because the one you went to is clearly stupid.
Click to expand...
Click to collapse
Hi Zero, probably should start a new thread for this, but I've noticed this in all the Ones I've seen. What happens is the Upper speaker has good amounts of bass and treble but very low midrange. On the other hand, the lower speaker has good midrange, okay bass, and lacking treble. That's exactly why it sounds uneven. Can you please make a mod to solve this?

For anyone interested in an update - the issue doesn`t come from vibration on the grilles. There is a small rubber around the speaker to prevent that and we doubled it to see if it makes any difference. It doesn`t. We realized that the noise was coming from some kind of short circuit whenever we pressed the daugther board along the top of the phone (we could hear a small buzz each time we pressed it). Next stop = electronics technician...

fujisan582 said:
For anyone interested in an update - the issue doesn`t come from vibration on the grilles. There is a small rubber around the speaker to prevent that and we doubled it to see if it makes any difference. It doesn`t. We realized that the noise was coming from some kind of short circuit whenever we pressed the daugther board along the top of the phone (we could hear a small buzz each time we pressed it). Next stop = electronics technician...
Click to expand...
Click to collapse
Hello mate ! Sorry for asking this question, as this thread was started long ago. How does it perform now ? Do you regret that your device has been repaired ? Can you please upload some photos of the device ? Does it look and feel like it was a new device after the entire messed up repair ? Sorry for asking these questions. Thanks in advance :good:

Poking the sim card tool in the wrong hole

So when activating the phone, I foolishly followed the Verizon tech's advice to poke the sim tool in both holes in the top. Doing my research post-activation, I see that I poked the tool into the mic.
Likely damage? There are two mics, but the one on top surely has a slightly different purpose. How can I verify if I did any damage?

LOL - I see a ton of posts on this site and reddit with people that have done the same thing. Still would love to know what the top mic is for and ideas for testing for damage.
Likely candidates for damage are "waterproofing", the mic itself, fabric, etc.
If my eyesight and the light were better I'd have noticed the outline of the tray, but couldn't see it. I should know better than to listen to a phone tech for advice like that.

mseifert said:
LOL - I see a ton of posts on this site and reddit with people that have done the same thing. Still would love to know what the top mic is for and ideas for testing for damage.
Likely candidates for damage are "waterproofing", the mic itself, fabric, etc.
If my eyesight and the light were better I'd have noticed the outline of the tray, but couldn't see it. I should know better than to listen to a phone tech for advice like that.
Click to expand...
Click to collapse
Noise cancelation, most likely. As to testing for damage, that may prove difficult.

Mostly, those mics aren't directly behind the hole in the frame. They're mounted on top of the PCB and a 90° plastic tube is glued on them to prevent dust, sand and poking derps to damage the microphones. I don't know how Samsung did this in the S10 series.
Testing noise reduction microphones isn't possible directly, just when in use. They're not used by Android, they're used by the actual sound driver and can't be controlled directly via the OS.

Jerryrigeverything did a video on this (in a video he talked about it not a full video on it) the phone is designed for people who do this and it doesn't have any effect. The top mic is probably used for both noise canceling and when you are in a loud environment and have your hand covering the bottom of your phone (like a concert)

If it was my phone and I had done this specifically at the direction of a Verizon representative and it could be verified phone was damaged as a result, I would be trying to get them to replace phone. A tech uninformed enough to suggest a stupid move like this will probably lie and say they never instructed you to do this. Maybe poking tech in wrong hole would be fitting revenge.

LMAO.. i did that to my wife and she liked it.

bsam55 said:
If it was my phone and I had done this specifically at the direction of a Verizon representative and it could be verified phone was damaged as a result, I would be trying to get them to replace phone. A tech uninformed enough to suggest a stupid move like this will probably lie and say they never instructed you to do this. Maybe poking tech in wrong hole would be fitting revenge.
Click to expand...
Click to collapse
If Verizon had actually sold me the phone, I'd consider it. But since I bought it directly from Samsung (it was a $300 off deal!) I don't believe I'd end up with a replacement. The first thing I have to get over is feeling so stupid. I had read something somewhere about dual sim slots - probably on some future phone - and because of the symmetry thought that there were two of them.
Zmantech said:
Jerryrigeverything did a video on this (in a video he talked about it not a full video on it) the phone is designed for people who do this and it doesn't have any effect. The top mic is probably used for both noise canceling and when you are in a loud environment and have your hand covering the bottom of your phone (like a concert)
Click to expand...
Click to collapse
It makes sense they would design the phone to prevent such a common mistake. Why design two identical holes in the top where one opens the tray and one destroys a mic? Reminds me of a Dilbert strip. Thanks for the assurance. It helps ease that worried feel.

Player04 said:
LMAO.. i did that to my wife and she liked it.
Click to expand...
Click to collapse
hilarious

Simple, just use the built in voice recorder in interview mode.

Did the same thing the very next second I unboxed it...it seems to me there is no damage...but I cant verify it....thinking of it, I probably haven't shot a single video from this phone since the time I got it (its launch)

Player04 said:
LMAO.. i did that to my wife and she liked it.
Click to expand...
Click to collapse
I have never seen a better reply on XDA ever. That's funny.

Wrong hole compilation

Uhh
Wow, this is why there are 2 mics, one on bottom, one on top...It is simply for STEREO sound during video recording.

I did this on the bottom hole ?
But seriously I worry now about waterproof. I tested the mic by recording a video in landscape talking in stereo in both mics and playback sounded fine.

Nope. The top microphone is for noise cancellation during a phone conversation on speaker. Your other party will hear a lot of uncancelled background noise.

Ejector tool cannot damage the mic
mseifert said:
So when activating the phone, I foolishly followed the Verizon tech's advice to poke the sim tool in both holes in the top. Doing my research post-activation, I see that I poked the tool into the mic.
Likely damage? There are two mics, but the one on top surely has a slightly different purpose. How can I verify if I did any damage?
Click to expand...
Click to collapse
YouTube at about 3:52 into the video
Huawei P30 Pro Teardown! - How does a 'Periscope Camera' work?
This answers the age old question, "I mistakenly poked the mic hole with the ejector tool, did I damage the mic?"... The answer is no... I'm sure all phone manufacturers thought of this... on pretty much every phone, the actual mic is off to the side internally...

N M 156 said:
YouTube at about 3:52 into the video
Huawei P30 Pro Teardown! - How does a 'Periscope Camera' work?
This answers the age old question, "I mistakenly poked the mic hole with the ejector tool, did I damage the mic?"... The answer is no... I'm sure all phone manufacturers thought of this... on pretty much every phone, the actual mic is off to the side internally...
Click to expand...
Click to collapse
Probably toasted the water protection though.

redoregon said:
Probably toasted the water protection though.
Click to expand...
Click to collapse
Nope... Watch the video... No waterproofing damage either...

So I did the same thing too!
While distracted, I used a sewing needle to try to open the sim card port and accidentally jammed it in the hole by the charging port!
Whoops!
So checking out this video https://www.youtube.com/watch?v=kHzmFPoZbCA&feature=youtu.be&t=293
It looks like I ran into a metal box looking thing on the mother board (I think that is what I was pressing depressingly firmly into trying to get the sim tray to open.) . IO think that is the mic chip, but not the opening? So did I bump that, but not damage waterproofing and not damage the mic?
I just do not know what I was stressing and if I should worry. I was using a sharp needle, but I do not think i punctured anything!