I'm currently on pra-lx1c432b172 and I want downgrade to B115 becouse I want a single Sim firmware. How do that?
Wire1122 said:
I'm currently on pra-lx1c432b172 and I want downgrade to B115 becouse I want a single Sim firmware. How do that?
Click to expand...
Click to collapse
Your P8 Lite 2017 smartphone is dual sim o single sim?
Single sim
Wire1122 said:
Single sim
Click to expand...
Click to collapse
I think you change the oeminfo file? You need to find the oeminfo file backup for 432c single-sim firmware. And restore this with twrp. Next flash the c432 firmware with adb fastboot.
Inviato dal mio PRA-LX1 utilizzando Tapatalk
Ok, where can find oem info for my single Sim fw?
Oeminfo
Wire1122 said:
Ok, where can find oem info for my single Sim fw?
Click to expand...
Click to collapse
I have it, if you write your email on PM i send you the file
Hey guys i have a P8 Lite 2017 PRA-LX1B432 Single Sim and the phone is fully bricked!! I tried the dload method and i tryed a couple firmwares and flash them via adb fastboot and still nothing! Can anyone pleasee please help me out i don't care if the phone debrand to dual sim i just want the phone to work again normaly
https://forum.xda-developers.com/p8...on/guide-unbrick-huawei-p8-lite-2017-t3766678
You can use this method to downgrade to your preferred Frimware
Hi
I rebranded my P10 L09C432 to dual SIM L29C432. After that all works ok. Before i dont save backup my oemino file.
Now i must come back to my original L09C432. Again i done rebranded to L09C432 with use under script option rebrand to L09C432 and replace in directory \HWOTA\update files for model L09C432 (donwloaded from this site http://pro-teammt.ru/firmware-database/?firmware_model=vtr-l09&firmware_page=0 )
After that all is ok but SIM CARD is not reconized(show only emergency call) and above WIFI in menu setting show still option DUAL SIM SETTINGS. Info ABOUT show correct VTR-L09 and build number VTR-L09C432B150
I use some version B130, B150 and B180 and still the same problem. WHen again back to rebrand to L29 all works ok and all sim works ok.
How i can repaire my P10 to go back to original L09C432 with single sim card.
What was done by rebrand to L29 that now i can no go back to L09 ?
Thanks for help.
Why do you want back to L09? L29 gives you an extra sim option, which is not that bad i think. the problem is and that´s just rumors: branded l09 phones are actually l29, but the carriers don´t want to support the second sim for obvious reasons. So, stay on l29.
I need back to L09 because i want sell my phone and phone has Huawei warranty. I need sell original manufacturer model.
Please anybody help me?
I also write to funkyhuawei support and he tell me that if i dont have backup oeminfo file i cant come back to L09 because tell me that file oeminfo is specific diffrent for each device. Tell me that this is not te same file on all L09C432.
But wat info contains this file?
Anybody has backup OEMinfo file from manufacturer model L09C432 and can share me?
pepe_lodz said:
I need back to L09 because i want sell my phone and phone has Huawei warranty. I need sell original manufacturer model.
Please anybody help me?
I also write to funkyhuawei support and he tell me that if i dont have backup oeminfo file i cant come back to L09 because tell me that file oeminfo is specific diffrent for each device. Tell me that this is not te same file on all L09C432.
But wat info contains this file?
Anybody has backup OEMinfo file from manufacturer model L09C432 and can share me?
Click to expand...
Click to collapse
Hi. I have the same problem, you find out how to fix it?
No i don't find solution. Some user tell me that I must have original OEminfo file from my L09 T-mobile. But I don't find this file.
pepe_lodz said:
I need back to L09 because i want sell my phone and phone has Huawei warranty. I need sell original manufacturer model.
Please anybody help me?
I also write to funkyhuawei support and he tell me that if i dont have backup oeminfo file i cant come back to L09 because tell me that file oeminfo is specific diffrent for each device. Tell me that this is not te same file on all L09C432.
But wat info contains this file?
Anybody has backup OEMinfo file from manufacturer model L09C432 and can share me?
Click to expand...
Click to collapse
I rebranded from Italian to l09c432. You don't have to remove sim while rebranding. Sim must be inserted before turning on your phone.
Sent from my [device_name] using XDA-Developers Legacy app
Explanation of our problem:
If you have a carrier version of the singleSIM P10 (VTR-L09xxxx) and you want rebrand or debrand it, you have to use the firmware for DualSIM (VTR-L29xxxx), or you SIM won´t be recognized anymore!
The good thing is, after that, you´ll be able to use both SIM or SIM and microSD. The provided HWOTA rom is mainly for the L29. If you want the L09 you have to replace the "update_all_hw.zip" in the update folder. If you not sure how to get, take a look in the Huawei-Forums
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
You can REBRAND your WAS-LX1 (3GB RAM) or WAS-LX1A (4GB RAM) to C432 (European version) and CONVERT Single Sim to Dual Sim!
YOU NEED ANDROID 7 (EMUI 5)!
If you're using Android 8 (EMUI 8) you have to roll back to Android 7 via HwOTA8, then you can REBRAND/UNLOCK the phone and then you can upgrade to Android 8 via HwOTA7.
===================
Requirements:
At least 50% battery charge
Fully Unlocked Bootloader (Phone Unlocked and FRP Unlocked) (Go to Fastboot mode and you can see if it's fully unlocked or not)
TWRP ( You can use any TWRP for P10Lite with EMUI 5, here's a link if you don't have one: https://mega.nz/#!WFYWEJjJ!HZGsY4WKdbYGr6M8VEeztDCzQe6UN020ro6f_g6V8FY )
WAS-LX1 C432 Dual Sim OEMinfo (TWRP backup) ( USE MY OEMinfo, TESTED AND WORKS 100%: https://mega.nz/#!ycpRnSqS!EW5acd5iYDofDGh4zGbWkWXvQwAnPORZB_FKv7KtRP0 )
WAS-LX1 C432 Dual Sim OEMinfo (Flashable ZIP made by KingOfMezi, I have NOT TESTED yet! Might works or might not) (Link: https://mega.nz/#!bYpkCTrb!jHOw1UAW_PcfWzK--e7YLqyw_tLqWuRBIz-eDI7rowU )
WAS-LX1A C432 Dual Sim OEMinfo (Download link: https://drive.google.com/file/d/0B-k_1rnfFeEvdWxZZE1tNWwwOHM/view)
ROM Warsaw-L21_C432 (Download link: http://androidhost.ru/JT)
===================
LX1A (4GB RAM) owners: Еverything is the same as in the guide below, just use WAS-LX1A C432 Dual Sim OEMinfo and folder WAS-L21A_hw_eu (contains the file update_WAS-L21A_hw_eu.app)
How to:
1. Prepare your SD Card:
Download the archive: Warsaw-L21_C432B182_EU_SERVI CE_androidhost.ru.rar
In the root directory of your SD Card create a folder "dload"
Put the file UPDATE.APP and folder WAS-L21_hw_eu (contains the file update_WAS-L21_hw_eu.app) inside your dload folder
Must be: "SDCARD\dload\UPDATE.APP" and "SDCARD\dload\WAS-L21_hw_eu\update_WAS-L21_hw_eu.app"
Download the archive: DUAL-SIM-OEMINFO-C432.zip
PUT the folder "DUAL-SIM-OEMINFO-C432" into "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER"
Must be: "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER\DUAL-SIM-OEMINFO-C432"
Download the archive: Huawei P10 Lite-OemInfoC432DualSim.zip
Put the file Huawei P10 Lite-OemInfoC432DualSim.zip to your SD Card
2. Instalation:
Reboot into TWRP, create a backup of your original OEMinfo (if something goes wrong and you need your original oeminfo)
MOVE or COPY your original OEMinfo somewhere in a safe place
Now you have 2 choices (it doesn't matter which type you choose but you can use my recommended method):
(Recommended) Restore TWRP backup: Go to TWRP -> Restore and select a folder "DUAL-SIM-OEMINFO-C432" then restore the OEMinfo partition.
(Not Tested) Install ZIP via TWRP: Go to TWRP -> Install and select the file "Huawei P10 Lite-OemInfoC432DualSim.zip" then install OEMinfo.
Go to TWRP -> Reboot -> Turn OFF you phone
Once the phone is turned off hold all 3 buttons volume up, volume down, power until you see EMUI update menu
An automated system update process will begin
After successful upgrade your phone will have Dual Sim and STOCK WAS-LX1C432B182
===================
B182 is an old version and soon you will receive OTA update to B184 and then update to B194 and maybe newer versions later
IMEI 1: Your current IMEI
IMEI 2: 000000000000000
===================
Warning:
Then you will have LOCKED Bootloader (you can easily unlock it with the command: fastboot oem unlock YOUR_UNLOCK_CODE)
STOCK RECOVERY (if you want TWRP you have to flash it again)
===================
THIS WORKS ON MY WAS-LX1C432 (3GB ram / Single Sim) and now I have dual sim for free!
===================
It will works on WAS-LX1A but you need Dual SIM OEMinfo for LX1AC432 and you should use folder "WAS-L21A_hw_eu"
OEMinfo WAS-LX1AC432B182 (Dual Sim 4GB version) by LuckOne79 Link: https://drive.google.com/file/d/0B-k_1rnfFeEvdWxZZE1tNWwwOHM/view
===================
Credits:
LuckOne79 (WAS-LX1A C432 Dual SIM OEMinfo)
KingOfMezi (TWRP and Flashable Oeminfo zip)
===================
Screenshots:
Tested and confirmed to work with 2 sim cards from the same carrier (Screenshot: 2)
Tested and confirmed to work with 2 sim cards from 2 different carriers (Screenshot: 4 and 5)
hi i made your oeminfoC432 totally flasheable
to make it easier for everyone, with just flashing and ready,
give me the credits in your post https://mega.nz/#!bYpkCTrb!jHOw1UAW_PcfWzK--e7YLqyw_tLqWuRBIz-eDI7rowU
to solve the second number imei of the (00000000000000)
guiate through this post that I've done
depaso updated to the last update January 2018
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
KingOfMezi said:
hi i made your oeminfoC432 totally flasheable
to make it easier for everyone, with just flashing and ready,
give me the credits in your post https://mega.nz/#!bYpkCTrb!jHOw1UAW_PcfWzK--e7YLqyw_tLqWuRBIz-eDI7rowU
to solve the second number imei of the (00000000000000)
guiate through this post that I've done
depaso updated to the last update January 2018
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
hey kingofmezi, i just got a new vodafone p10 lite and was disappointed to discover it had been software crippled to a single sim.
I contacted hauwei and know the device has two IMEIs (and i know them both), even though the about screen only shows one.
If change the firmware to a debranded one, will it automatically show the two IMEIs, or do i have to do something else.
gwaitsi said:
hey kingofmezi, i just got a new vodafone p10 lite and was disappointed to discover it had been software crippled to a single sim.
I contacted hauwei and know the device has two IMEIs (and i know them both), even though the about screen only shows one.
If change the firmware to a debranded one, will it automatically show the two IMEIs, or do i have to do something else.
Click to expand...
Click to collapse
if you follow this tutorial, you will automatically be added 2 imei, but the second imei will appear in 000000, but your phone will have the dual function, sim can have 2 sim cards, if you want to solve the problem of 00000, if this tutorial, then that aya echo of this thread
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
KingOfMezi said:
if you follow this tutorial, you will automatically be added 2 imei, but the second imei will appear in 000000, but your phone will have the dual function, sim can have 2 sim cards, if you want to solve the problem of 00000, if this tutorial, then that aya echo of this thread
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
Yes, but that is what i am saying. my phones has two IMEIs and I know them both, but only one is displayed in the user interface.
Why would i want to destroy the IMEI if i have a valid one
hello, is it possible to switch from LX1AC432 monosim B197 to LX1A monosim but Brand 3 (H3G)?
ps. possible without service rom 3?
Thank you
I managed to rebrand my c432 device and got the official 2nd IMEI number from huawei.
Just need some help to set the 2nd IMEI. grateful if someone can pm the instructions.
gwaitsi said:
I managed to rebrand my c432 device and got the official 2nd IMEI number from huawei.
Just need some help to set the 2nd IMEI. grateful if someone can pm the instructions.
Click to expand...
Click to collapse
How you got 2nd IMEI from Huawei?
I have only one IMEI, the 2nd is only 00000...
I'm not sure, but you can try with HCU Client (https://hcu-client.com/) to add 2nd IMEI.
Keep in mind that this is a PAID service!!!
Aalesund said:
How you got 2nd IMEI from Huawei?
I have only one IMEI, the 2nd is only 00000...
I'm not sure, but you can try with HCU Client (https://hcu-client.com/) to add 2nd IMEI.
Keep in mind that this is a PAID service!!!
Click to expand...
Click to collapse
I am aware of this one and avast blocked it for further assessment.
Also i only need to use one time. I can't believe it is not possible to fix this free of charge. especially when i know the real value that has to be set.
Seems the value to 2 digits more than the base value.
---------- Post added at 09:22 PM ---------- Previous post was at 09:15 PM ----------
KingOfMezi said:
if you follow this tutorial, you will automatically be added 2 imei, but the second imei will appear in 000000, but your phone will have the dual function, sim can have 2 sim cards, if you want to solve the problem of 00000, if this tutorial, then that aya echo of this thread
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
I went through the thread and can't find anything in relation to fixing the 000...
Can you please share the information, or PM me with the details.
I managed to check with HW and every dual sim device will have a ime. it should be 2 more than the base one
Also, i don't know how it is possible, but my phone number from SIM1-DE, is now on SIM2-CZ and SIM1 is blank.
Hi guys,first of all nice work for managing to enable second SIM but my question is if i do all of this...can I call use sms and data on second sim what's deal about that I mean if its not usable then there is no point of going through risk of doing all of this.
KingOfMezi said:
hi i made your oeminfoC432 totally flasheable
to make it easier for everyone, with just flashing and ready,
give me the credits in your post https://mega.nz/#!bYpkCTrb!jHOw1UAW_PcfWzK--e7YLqyw_tLqWuRBIz-eDI7rowU
to solve the second number imei of the (00000000000000)
guiate through this post that I've done
depaso updated to the last update January 2018
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
Hi
I tried doing everything three times and when I get to swipe the Oeminfo the flash said the always "invalid zip". How to change this?
and I get a rom compilation NRD90M test-keys whithout updates. What i want is the version rom B182
If you can help,
:anjo:
Regards
Andrew
Aalesund said:
You can REBRAND your WAS-LX1 to C432 (European version) and CONVERT Single Sim to Dual Sim!
Click to expand...
Click to collapse
Thank you very much for the guide. I rebranded and converted to dual SIM my C02 Vodafone single SIM. Followed all the steps, no issues arised.
It was the guide I was waiting for, since the day the P10 lite forum was created!
yjosipy said:
Hi guys,first of all nice work for managing to enable second SIM but my question is if i do all of this...can I call use sms and data on second sim what's deal about that I mean if its not usable then there is no point of going through risk of doing all of this.
Click to expand...
Click to collapse
There are no problems using the 2 sim cards. I use Sim1 for calls and Sim2 for internet data.
AFQuintans said:
Hi
I tried doing everything three times and when I get to swipe the Oeminfo the flash said the always "invalid zip". How to change this?
and I get a rom compilation NRD90M test-keys whithout updates. What i want is the version rom B182
If you can help,
:anjo:
Regards
Andrew
Click to expand...
Click to collapse
Try with TWRP Restore!
Flashing ZIP is not tested, this zip is provided by KingOfMezi but I have not tested it.
I have used TWRP backup/restore method on my phone!
Download this https://mega.nz/#!ycpRnSqS!EW5acd5iYDofDGh4zGbWkWXvQwAnPORZB_FKv7KtRP0 (this is my own OemInfo)
And then do this:
PUT the folder "DUAL-SIM-OEMINFO-C432" into "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER"
Must be: "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER\DUAL-SIM-OEMINFO-C432"
Restore TWRP backup: Go to TWRP -> Restore and select a folder "DUAL-SIM-OEMINFO-C432" then restore the OEMinfo partition.
That's the way I did it! Works fine.
Then follow the rest of instruction for install B182.
Could someone be so kind of telling why you were doing this? I mean your phones just have the capability of putting one sim into the phone, the second sim is just virtual? If I am understanding something wrong please correct me
EDIT: Oh, now i saw... there's the possibility to put in a second sim card lol
assuming to what you say its just blocked by the software
Here I am able to do everything according to the instructions how you stated !!! It's great, the phone works without error! I still managed to put a 32 GB SD Memory Card! ALL WORK WITHOUT ERRORS !!!
SIM -1 SIM -2 SD CARD 32GB all in same time! :fingers-crossed::fingers-crossed::fingers-crossed:
Here is the link for SD Card and SIM 2 correction !
http://www.noreplied.com/how-to-ins...d-and-microsd-card-in-samsung-galaxy-s7-edge/
Good luck !!!
Thankful to you tutorial and service ROM Warsaw-L21_C432, i convert my WAS-AL00C00 to WAS-LX1AC432B182, and then update to B184.
The newest version is B198, but i won't update to it. Thanks
thanks for the guide, I had to perform it twice, whole procedure two times. Then it worked out, 3 devices pending, 4 colleagues satisfied
Hello, if you have the sim locked to a carrier, do this unlock that sim? when you add the second sim, will it be locked to the carrier too?
thanks
sexbob said:
Hello, if you have the sim locked to a carrier, do this unlock that sim? when you add the second sim, will it be locked to the carrier too?
thanks
Click to expand...
Click to collapse
Yes, if you SIM is locked to some carrier 2nd SIM will also be locked to the same carrier. There is NO free way to unlock it!
You can unlock the SIM slots with HCU Client and costs only 3 euro (3 credits).
Look here how to unlock the SIM slots: https://forum.xda-developers.com/showpost.php?p=76153312&postcount=2
or here: http://hcu-client.com/huawei-mtk-phone-sim-unlock/
Anyone tried to enable dual sim on the Canadian variant? WAS-L03T?
Hello, I have a Huawei P8 lite 2017 PRA-LX1 phone bought 3 months ago. Originally it had a PRA-LX1C02B158 Vodafone firmware (Nougat) single SIM, but after rooting, unlock bootloader and FRP and finally after many and many tries ( I can not remember all of them ) I followed Almironi procedure (https://forum.xda-developers.com/p8lite/p8-lite-2017-discussion/trying-to-update-to-oreo-t3814332) and the phone booted again apparently without any Vodafone files (even initial logo disappeared) and with Oreo version. The problem was that I thought that with f/w PRA-LX1C432 PRAGUE_L31 my phone will become dual sim. WRONG it still recognizes only 1 SIM card. Does any one really know if this phone can be flashed to a dual SIM version ? Does it have the necessary hardware since it only shows one IMEI ?
Sorry if there is already a post with this questions or if a broke any rule of this forum.
Many thanks in advance.
o_iluminado said:
Hello, I have a Huawei P8 lite 2017 PRA-LX1 phone bought 3 months ago. Originally it had a PRA-LX1C02B158 Vodafone firmware (Nougat) single SIM, but after rooting, unlock bootloader and FRP and finally after many and many tries ( I can not remember all of them ) I followed Almironi procedure (https://forum.xda-developers.com/p8lite/p8-lite-2017-discussion/trying-to-update-to-oreo-t3814332) and the phone booted again apparently without any Vodafone files (even initial logo disappeared) and with Oreo version. The problem was that I thought that with f/w PRA-LX1C432 PRAGUE_L31 my phone will become dual sim. WRONG it still recognizes only 1 SIM card. Does any one really know if this phone can be flashed to a dual SIM version ? Does it have the necessary hardware since it only shows one IMEI ?
Sorry if there is already a post with this questions or if a broke any rule of this forum.
Many thanks in advance.
Click to expand...
Click to collapse
You cannot upgrade your phone from single sim to dual SIM. Dual SIM means that your phone has two slots for two SIM cards. Your phone has one. No software can change that.
Sultanka said:
You cannot upgrade your phone from single sim to dual SIM. Dual SIM means that your phone has two slots for two SIM cards. Your phone has one. No software can change that.
Click to expand...
Click to collapse
Hi,
my phone has 2 slots. Slot 2 is used ether for SIM2 or for memory card.
Tks.
Hi. I have a mate 10 pro. Originally it was a branded bla-l09 mono sim. I, with funk Huawei, turned it in l29 dual sim. Now I have the need to turn it again in l09 and I think to do this with hwota8 (to save my money). This tool does not touch the mono/dual sim functionality. Doing this, there is a chance that it remains dual sim?
Thanks
Paolo83 said:
Hi. I have a mate 10 pro. Originally it was a branded bla-l09 mono sim. I, with funk Huawei, turned it in l29 dual sim. Now I have the need to turn it again in l09 and I think to do this with hwota8 (to save my money). This tool does not touch the mono/dual sim functionality. Doing this, there is a chance that it remains dual sim?
Thanks
Click to expand...
Click to collapse
Yes, because FH tool flashes an included (and disguised) oeminfo that is dual-sim. The included oeminfo changes your imei, imei2 and sn while in fastboot. Which in turn has also changed your bootloader unlock code.
HWOTA8 will only edit oeminfo to L09 but you will still technically be dualsim. I'm not sure how that will work on L09 firmware though. However, when you flash oeminfo you will have to unlock again, which will be impossible if you don't have your new unlock code (Acquired after you rebranded using FH).
What firmware are you on now?
Starting with BLA-L29C432B145 (The Night Shot update, so might already apply to all cust that has the new Night shot firmware) you can no longer get an unlock code from DC/HCU.
ante0 said:
Yes, because FH tool flashes an included (and disguised) oeminfo that is dual-sim. The included oeminfo changes your imei, imei2 and sn while in fastboot. Which in turn has also changed your bootloader unlock code.
HWOTA8 will only edit oeminfo to L09 but you will still technically be dualsim. I'm not sure how that will work on L09 firmware though. However, when you flash oeminfo you will have to unlock again, which will be impossible if you don't have your new unlock code (Acquired after you rebranded using FH).
What firmware are you on now?
Starting with BLA-L29C432B145 (The Night Shot update, so might already apply to all cust that has the new Night shot firmware) you can no longer get an unlock code from DC/HCU.
Click to expand...
Click to collapse
Thanks.
Yes I have a unlock code got after debranding with dc unlocker. Now I am in c432b148-sp1 (xloader 01).
ok i do all.
the situation is this: dual sim works! But in the settings, isn't any option to activate/deactivate sim1/sim2.
If i remove sim 2, It looks like a normal mono sim.
If i can manage it with a third part app... it was fantastic!