[ROM][8.1]LineageOS 15.1 for J7 Prime - Samsung Galaxy J7 Prime / J7 On NXT (Exynos7870)

[ROM][8.1]LineageOS 15.1 for J7 Prime - Samsung Galaxy J7 Prime / J7 On NXT (Exynos7870)

CHANGELOGS:
22/12/18
- Fixed video recording issues
- Updated to December security patch
- Updated Bluetooth blobs (improvements)
- Updated to latest oreo kernel sources which shall bring numerous stability improvements
- Updated sdcardfs driver
- Updated USB drivers (should improve MTP)
- Updated binder patches in kernel
- Fixed wifi issues in countries like Syria
- Overall performance and stability improvements
- Synced with LOS source (Many things updated)
8/11/18
- Fixed deepsleep issue
- Optimized idle battery drain massively
- Updated to November 2018 security patch
6/11/18
- Updated RIL libs from stock oreo firmware
- Added APTX bluetooth codecs
- Fixed lag in 720p/1080p video recording and playback
- Fixed storage/sdcard mount issue
- Temporarily set selinux to permissive
OLDER CHANGELOGS:
3/11/18
- Updated security patch level to September 2018
- Fixed HWC
- Fixed video recording
- Fixed screen on delay and touch on delay completely
- Updated to stock oreo RIL stack
- Fixed call forwarding
- Fixed default network type selection
- Improved overall network stability
- Improved UI smoothness alot
- Improved overall system performance
- Improved battery performance because HWC is fixed (Should get better SOT now)
- Other LineageOS updates (check their gerrit xD)
3/09/18
- Enabled sdcardfs which should improve r/w speeds
- Switched to new oreo based kernel source
- Updated doze to support wake by gestures features
- Updated live display
- Misc stability and performance improvements (See git)
- Other LineageOS updates (Aug security patch, etc)
31/07/18
- Fixed FP enrollment bug
- Fixed all issues in enforcing mode
- Fixed lockscreen glitch introduced in previous build
- Added call recording feature
30/07/18
- Fixed screen on delay completely (Although there might 3-4 sec of touch delay after boot)
- July security patches have been merged
- Signal icons and carrier text can be hidden for disabled SIMs
- Data toggle in quick settings on 15.1 has now gotten the data usage view back
- Optional black style: now you can make the dark UI style completely black
- More granular Trust warnings controls
- Fixed Encryption
- Some performance tunings
Build 7
- Fixed sound break during voice calls
- Various Audio HAL improvements
- Fixed BT voice calls
- Optimised Bluetooth, now file transfers should be easy-go
- Fixed Wi-Fi Direct
- Fixed Screen Cast (Screen mirroring)
- Fixed reboot while screen recording
- Kernel is set to enforcing
- Fixed Safetynet (even without magisk)(But rooting with SuperSU will break it)
- Removed AudioFX (As it caused problems and wasn't working fine)
- Removed OEM unlock toggle from Developer Options
- Disabled touckey when screen turned of due to proximity sensor (This will prevent accidental pressing of recents/back keys during calls)
- Updated Widevine to support L1 DRM
- Restricted back number of registered fingerprints to 3
- Other LineageOS updates (Trust Interface, other optimizations and features)
- Maybe more which I might have missed
Build 6
- Fixed MTP issue when Android Debugging is turned on
- Switched to new audio HAL (stock)... Need someone to test bt audio and incall
- Fixed audio cut-off while incall
- Fixed speaker audio breakage sometimes when ending a call
- Fixed low mic audio in some apps (Whatsapp, recording, etc)
- I've set notification panel to opaque to fix lag
- Added Always On Display
- Fixed Widewine DRM Engine (This unlocks some DRM protected content on Youtube, Netflix, etc)
- Optimisations to bluetooth
- Updated Vulkan Engine
- Live display optimisations
- Other system optimisations and improvements
- LineageOS updates
Build 5
Not much has changed since build 4
- Some HAL improvements
- Sound seems to be more clear now
- Fixed sswap completely. Multitasking should improve
Build 4
- Improvements to boot speed
- Faster boot animation
- Cleaned up useless stuff from ramdisk heavily
- Fixed HW acceleration
- Fixed HD video playback
- Fixed 1080p video recording
- Improvements to camera
- Improvements to RIL- Improvements to bettery usage
- Improvements to audio quality
- Overall system performance improvements
- Fixed torch on delay
- Fixed headset mic
- Kernel optimisations
- Fixed lags
- Other LineageOS changes and features
Build 3
- Improved audio during calls (Volume should be pretty decent now)
- Fixed audio breakage and mic muting during calls
- Fixed SMS not sent error
- Various performance improvements
- Fixed Night light and Live display
- ROM should boot faster than before
- Added SSWAP which will improve multitasking
- Various LineageOS changes and improvements like Overlay feature(Light/dark theme), etc.
Build 2
- Fixed speaker audio break for some users
- Fixed LEDs
- Fixed black screen on turning battery saver at low brightness
- LineageOS changes

If you are facing some bugs other than the ones mentioned in the thread i recommend you to make a clean install with no additional addons you may have installed, and check if those bugs persist because many a times people use some scripts or tweaks for performance/battery tuning and end up with some things broken

Tanq
Tanq eu sar

Awesome!!!!
Thank you very much Dev

Thank you bro. Will test on this weekend.

Thanks Bro (Emre Genç YouTube Channel)

Pls dev j7 pro

Show start thanks @DarkLord1731
---------- Post added at 15:54 ---------- Previous post was at 15:52 ----------
Show start thanks @DarkLord1731
---------- Post added at 15:55 ---------- Previous post was at 15:54 ----------
Show start thanks @DarkLord1731
---------- Post added at 15:59 ---------- Previous post was at 15:55 ----------
Show start thanks @DarkLord1731
---------- Post added at 15:59 ---------- Previous post was at 15:59 ----------
Show start thanks @DarkLord1731

Pls dev j7 pro
---------- Post added at 01:14 PM ---------- Previous post was at 12:20 PM ----------
Working j7 pro?

Downloaded gonna try ryt now

Finally! Gonna test it and report any bugs I find
---------- Post added at 02:42 PM ---------- Previous post was at 02:35 PM ----------
chichareal said:
Pls dev j7 pro
---------- Post added at 01:14 PM ---------- Previous post was at 12:20 PM ----------
Working j7 pro?
Click to expand...
Click to collapse
This is for J7 Prime J610F do not try on J7 pro!!!

Mohamed El IDRISSI said:
Finally! Gonna test it and report any bugs if I find them
Click to expand...
Click to collapse
Don't flash it bro not yet it doesn't flash I tried just now but it wont flash
---------- Post added at 02:44 PM ---------- Previous post was at 02:42 PM ----------
Rom isn't flashing bro plz check it ? I wiped everything and at last the Rom won't flash had to flash feedstock Rom again hope you fix that file

Show start thanks @DarkLord1731
---------- Post added at 17:47 ---------- Previous post was at 17:46 ----------
Show start thanks @DarkLord1731

Pls dev j7 pro

Show start thanks @DarkLord1731

Dreamer130 said:
Don't flash it bro not yet it doesn't flash I tried just now but it wont flash
---------- Post added at 02:44 PM ---------- Previous post was at 02:42 PM ----------
Rom isn't flashing bro plz check it ? I wiped everything and at last the Rom won't flash had to flash feedstock Rom again hope you fix that file
Click to expand...
Click to collapse
Are you sure what is the error showing??, You should have done a backup in twrp

As always I thought it would flash so I didn't took nanbackup an i wiped data dalvik caches internal caches an flashed the rom it it said this rom is for device on7exelte an your device is: an error occuerd bla bla i didn't remember after that sorry for that ? but rom didn't flash ☹

Thank you very much

Dreamer130 said:
As always I thought it would flash so I didn't took nanbackup an i wiped data dalvik caches internal caches an flashed the rom it it said this rom is for device on7exelte an your device is: an error occuerd bla bla i didn't remember after that sorry for that ? but rom didn't flash ☹
Click to expand...
Click to collapse
@DarkLord1731It is indeed not working luckily I did a backup here's log

Related

[ROM][9.0.0_r40] AospExtended ROM V6.6 [OFFICIAL][ZE520KL/ZE552KL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
AOSP Extended is an AOSP based ROM which provides stock UI/UX with various customizations features along with the Substratum theme engine. The project has been made by cherry- picking various commits from various other projects. Being based on AOSP it provides a smooth and lag- free experience out of the box. We will constantly try to add more features and make it even better in future updates. A ROM by a user, for a user. #StayAOSP #ExtendYourDevice #BeExtended
Download ROM, GApps here for your device!
ZenFone 3 (ZE520KL/ZE552KL)
Google Apps
- GApps
Want to try this awesomeness?
Code:
[b]- If you're coming from stock rom, enable data roaming first (you'll be able to enable/disable it later on custom roms)
- Download the ROM and GApps of your choice
- Backup each and every partition from TWRP Recovery
- Make a full wipe (system, data, cache, dalvik)
- Flash AEX Package
- Install GAPPS package
- Wipe cache!
- And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended![/b]
Note: do Format Data if asked for password at boot
Monitor the changelog here!
Code:
[b]09-06-2019
AEX v6.6 changelog
- Merge June security patch (9.0.0_r40)
- Update all translations
- Update all pre-built apks
- Update all of our packages
- Update APN configs
- Update Weather client
- Update Boostframework
- Update our launcher with Quick Space
- Add Pocket Lock feature
- Add Sysserv support for Substratum theme engine
- Add Pixel Navigation bar animation
- Add Live Display
- Add Font QS tile
- Add Android Q's seek bar to media notification
- Add Android Q's status bar battery icon
- Add Less boring heads up feature
- Add Battery animation in settings
- Improve UI for certain applications
- Improve three finger swipe screenshot feature
- Improve some UI/UX aspects
- Improve auxiliary camera support
- Improve Bluetooth SBC
- Improve Location QS tile
- Fix battery icon shortcut
- Fix some theme issues
- Fix AOSP WFD (Miracast) support
- Fix audio server crashes again
- Under the hood improvements
- Bug fixes and performance improvements
ZenFone 3 specific changelog
- GPS updates
- Stability updates and other improvements
16-05-2019
- Fixed Ambient Display (thanks to vegeto1806 for letting me know about some issues)
- Updated kernel to Linux v3.18.140
11-05-2019
- Merged May security patch (9.0.0_r37)
- New Elegant UI
- Updated kernel to Linux v3.18.139 / CAF Tag LA.UM.7.6.r1-04800-89xx.0
- GPS updates from LA.UM.7.6.2.r1-08500-89xx.0
- Enable 2.4GHz channel bonding
- Increase in-call earpiece volume
- Fix for airplane mode
- Some configs updates
- Other fixes/optimizations
Thanks to planet9
- Fix for PixelMaster port
24-04-2019
- April security patch
- Kill HIDL ANT+ support
- GPS updates from LA.UM.7.6.2.r1-07300-89xx.0
- Changes to ignore RSSNR signal level (as requested on other threads)
- CarrierConfig updates from LA.UM.7.6.2.r1-08100-89xx.0
- Changes on Doze
- Enforcing
- Other improvements
Thanks to makorn645
- /APD as vendor partition
- Updated kernel to Linux v3.18.138 / CAF Tag LA.UM.7.6.r1-04500-89xx.0
- Blob updates and cleanup
- Many bug fixes/other improvements
24-11-2018
- First official build
- Added FM blobs from jasmine V10.0.1.0.PDIMIFJ
- Also from jasmine V10.0.1.0.PDIMIFJ: updated blobs for power-off alarm, bluetooth, time services, wifi, peripheral manager, listen, display and GPS
- Add missing libvulkan
- Camera changes on build.prop
- Small code cleanup
17-11-2018
- November security patch
- Updated kernel to Linux v3.18.125 / CAF Tag LA.UM.7.6.r1-03400-89xx.0
- AEX sources updated (17-11-2018)
- Enabled EIS in Google Camera
- Updated power profile for Pie
- Some Wi-Fi tweaks
- Multiple updates from CAF LA.UM.7.6.2.r1-04200-89xx.0
- Enable radio power saving
- Fix memory issues
- Bug fixes/other improvements
20-10-2018
- Initial Alpha Release
- Merge October security patch (9.0.0_r10)
- Enabled HW keys (thanks to vegeto1806)
- Added AsusParts Brazilian Portuguese translation
- Fixed memory leaks on ipacm (thanks to antoine-g)
- Latest LOS sources (thanks to makorn645 and planet9)
Clean flash is always recommended. Bug reports are not appreciated if not clean flashed.
Remove any kind of security PINs/Password and Fingerprints before flashing this build.
[/b]
- Some features may be missing
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
Visit our Website, join our Google+ Community, Subscribe to our Telegram Channel. Also join our Telegram Group Chat!
Do you want to translate to your language? Visit our Crowdin
All sort of contributions are welcomed. You can post your walls in our G+ community. Minimum res we require is W: 1152px | H: 2048px. We don't want our users to fight with each other so we humbly request you to be respectful to each other. We are not earning anything by sharing this ROM. Always read the full OP. Don't Quote the whole OP. Join our channel and community. #StayHappy #ExtendYourDevice
People behind this amazing ROM!
- @ishubhamsingh(Owner/Dev/Designer)
- JDC Team
- DirtyUnicorns
- LineageOS/Cyanogenmod
- TeamSubstratum
- Nitrogen Project
- Pure Nexus
- OmniROM
- AOSPA
- ABC ROM
- GZR Community
- Lakor Tools for Via Browser
- Hemanth S Tobi for Retro Music Player
- @AlienCreature7 and @Wizper99 (For designing the ROM Logo, Fling etc)
I guess there is nothing wrong in reading facts!
- Base Of the ROM & Version?
- >Rom is based on AOSP.
- Why no "Incremental/Delta updates" Support?
- >Actually the updates we provide monthly are heavily changed and modified than the previous builds. New stuff is merged and added. So we don't provide incremental updates and recommend a clean flash.
- Does this ROM Support Substratum?
- >Yes, full Substratum support!
- Which Gapps are recommended?
- >OpenGapps
- Will this ROM relock the bootloader?
- >No.
- What about XPOSED?
- >XPOSED is still in beta stage. We like Xposed but it messes up with the system so before giving any bug reports make sure you have Xposed uninstalled.
- When Will Be the Next Update?
- >No ETAs, please. ROM Will be updated whenever the new build is ready by your maintainer. We generally provide monthly updates with latest security patches and new features.
- I am facing FCs, Bugs, Some feature is broken?
- >Provide full info about your problem with logcat and the procedure to reproduce it.
- >How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
- Adaway is not working
- >Download it from here Adaway
- SElinux Linux mode changer app is not working nor Busy Box installer app is working.
- >Everything is good with the sources. You should try other things first and then contact your maintainer.
- I want to contribute to the development of this ROM.
- >Join our Google+ community
- >Join our Telegram group chat
- I want to contribute to the translation of this ROM.
- >Visit our Crowdin

XDA:DevDB Information
AospExtended v6.0 Alpha, ROM for the Asus ZenFone 3
Contributors
lipebs, makorn645, planet9
Source Code: https://github.com/AospExtended
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.3.x, Unlocked BL
Based On: AOSP
Version Information
Status: Stable
Created 2018-10-21
Last Updated 2019-06-09

Reserved

Reserved

Screenshots

Reserved

i just dirty flashed it on top of ArrowOS and everything works perfectly....although it is missing a ton of customizations from oreo builds...nontheless a very great rom!!
---------- Post added at 10:02 PM ---------- Previous post was at 09:53 PM ----------
just a minor bug i found is that the haptic motor isnt working at all...kind of important thing for me....Thanks anyways

YousifG7 said:
i just dirty flashed it on top of ArrowOS and everything works perfectly....although it is missing a ton of customizations from oreo builds...nontheless a very great rom!!
---------- Post added at 10:02 PM ---------- Previous post was at 09:53 PM ----------
just a minor bug i found is that the haptic motor isnt working at all...kind of important thing for me....Thanks anyways
Click to expand...
Click to collapse
This is an initial build and some bugs may occur as you can see
Pie is a WIP right now, many customs don't have customizations like Oreo because that demand some time to test a few things, implement and so on

lipebs said:
This is an initial build and some bugs may occur as you can see
Pie is a WIP right now, many customs don't have customizations like Oreo because that demand some time to test a few things, implement and so on
Click to expand...
Click to collapse
Ok...Thanks for the response

Hi, thanks for the Rom, but which camera app should I use? have tried pixelmaster from playstore but it doesn't have flashlight and such. I heard people talk about Gcam but which version is working with our phone? Also does it support at least 12MP?

tkhquang said:
Hi, thanks for the Rom, but which camera app should I use? have tried pixelmaster from playstore but it doesn't have flashlight and such. I heard people talk about Gcam but which version is working with our phone? Also does it support at least 12MP?
Click to expand...
Click to collapse
Try Open Camera :good:

agdoamorim said:
Try Open Camera :good:
Click to expand...
Click to collapse
Well thanks, just tried it for one day and it seems slow to focus, photos have much noise than in Pixelmaster. Hmm, maybe it's just me, gonna test them some more before I try something else

New AEX 6.0 update (17-11-2018)
Download link: https://drive.google.com/open?id=1Lg3a5ucDKqJsQTMlJY0D73sOKH5__Iw1
Changelog
- November security patch
- Updated kernel to Linux v3.18.125 / CAF Tag LA.UM.7.6.r1-03400-89xx.0
- AEX sources updated (17-11-2018)
- Enabled EIS in Google Camera
- Updated power profile for Pie
- Some Wi-Fi tweaks
- Multiple updates from CAF LA.UM.7.6.2.r1-04200-89xx.0
- Enable radio power saving
- Fix memory issues
- Bug fixes/other improvements

Does not start!
I did full cleanup (dalvik, cache, system, internal and data)
I installed Rom + Gapps + Magisk
The rom is in the colored google logo then restarted for TWRP, whenever I try to connect it stays a while in the logo then restarts to TWRP 3.2.3.
Ps: I was using HavocOS android 8.

Not booting....just keeps shutting down.....and no sim card detected aswell

kiq1702 said:
Does not start!
I did full cleanup (dalvik, cache, system, internal and data)
I installed Rom + Gapps + Magisk
The rom is in the colored google logo then restarted for TWRP, whenever I try to connect it stays a while in the logo then restarts to TWRP 3.2.3.
Ps: I was using HavocOS android 8.
Click to expand...
Click to collapse
I think you have to format data first if you come from android 8

kiq1702 said:
Does not start!
I did full cleanup (dalvik, cache, system, internal and data)
I installed Rom + Gapps + Magisk
The rom is in the colored google logo then restarted for TWRP, whenever I try to connect it stays a while in the logo then restarts to TWRP 3.2.3.
Ps: I was using HavocOS android 8.
Click to expand...
Click to collapse
YousifG7 said:
Not booting....just keeps shutting down.....and no sim card detected aswell
Click to expand...
Click to collapse
As @tkhquang mentioned: you need to Format Data on TWRP
That's needed on the first time to remove encryption, after the ROM installation/first boot you can encrypt again

lipebs said:
As @tkhquang mentioned: you need to Format Data on TWRP
That's needed on the first time to remove encryption, after the ROM installation/first boot you can encrypt again
Click to expand...
Click to collapse
but i was already running AEX and flashed this on top and just keeps restarting and the phone app keeps giving errors....

YousifG7 said:
but i was already running AEX and flashed this on top and just keeps restarting and the phone app keeps giving errors....
Click to expand...
Click to collapse
Have you tried this format data too? Try this if you can, because some people are testing AEX and everything seems fine...

New AEX 6.0 update (25-11-2018)
First official release for AEX Pie!
Download link: https://downloads.aospextended.com/...nded-v6.0-zenfone3-20181124-2041-OFFICIAL.zip
Changelog
- Added FM blobs from jasmine V10.0.1.0.PDIMIFJ
- Also from jasmine V10.0.1.0.PDIMIFJ: updated blobs for power-off alarm, bluetooth, time services, wifi, peripheral manager, listen, display and GPS
- Add missing libvulkan
- Camera changes on build.prop
- Small code cleanup

lipebs said:
New AEX 6.0 update (25-11-2018)
First official release for AEX Pie!
Download link: https://downloads.aospextended.com/...nded-v6.0-zenfone3-20181124-2041-OFFICIAL.zip
Changelog
- Added FM blobs from jasmine V10.0.1.0.PDIMIFJ
- Also from jasmine V10.0.1.0.PDIMIFJ: updated blobs for power-off alarm, bluetooth, time services, wifi, peripheral manager, listen, display and GPS
- Add missing libvulkan
- Camera changes on build.prop
- Small code cleanup
Click to expand...
Click to collapse
Are we going to have now like a 100mb ota? Or its same like dirty flashing new build?

[ROM][UNOFFICIAL][8.1.0] LineageOS 15.1 [BETA][6.03.2019]

Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT INFORMATION
Hi all,
This is an unofficial Oreo build for the Galaxy S3 (i9300) based on LineageOS 15.1.
Most of the ROM features are working, but the overall state might be not stable or not suitable for a daily use (not heavily tested yet).
Don't install this ROM as your daily driver.
This work is heavily based on works of forkbomb444 (thanks for device tree, kernel and device patches for LOS 14.1), rINanDO (thanks for device tree, kernel and device patches for LOS 15.1) and A$teroid (thanks for cherry-picks I took from his kernel).
What is working:
Boots
Audio (playback && recording)
Bluetooth
Graphics
Camera (photos && video recording)
Sensors
RIL (SMS, mobile data, calls)
Wifi
USB
Video playback (HW/SW)
What is not working:
No V-Sync
Video recording
calls
AKM sensors (accel & magnetometer) issues
probably, GPS could work better
gralloc / surfaceflinger issues
maybe yet something
Reporting bugs
When reporting reboots, please produce log below as follows
(using adb or terminal)
Code:
su
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
and attach in this thread.
If reporting another issues
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
A rough timestamp of when the issue occurred is also useful.
Click to expand...
Click to collapse
curiousrom said:
to quickly & easily capture logcat (Main log), Kernel log (dmesg) & Last Kernel log (last_kmsg which is important in case of unwanted reboot) without using a computer + adb or use a Terminal emulator on the phone:
Root the phone
Developer Options > Store logger data persistently on device > select All. More info about it here on developer.android.com
Install the free SysLog. (screenshot)
View attachment 4644180
Reboot the phone & reproduce the problem(s).
Open Syslog & select logcat, dmesg & last_kmsg. Add some significant keywords in the bottom including in Notes describing the bug & hit Take log.
The individual logs + a .zip of all of them will be saved in /sdcard/Syslog. You must rename them .txt to be able to attach them to an XDA post like logcat.log > logcat_log.txt for example. Or you can choose Share which will .zip them & then you can attach to a post or upload somewhere & link to in your post if the .zip is too big for XDA's attachment service (20 MB max).
Done! And make the dev happy.
***
Bug Reports & Logs?
If the phone is not rooted you can grant this permission to enable Syslog using ADB (15 seconds ADB Installer) & a computer:
adb shell pm grant com.tortel.syslog android.permission.READ_LOGS
You can also install an app like MatLog to analyse the logcat, filter it, search in it, export files etc but Syslog is fast & easy. If not rooted grant permission for MatLog:
adb shell pm grant com.pluscubed.matlog android.permission.READ_LOGS
***
Click to expand...
Click to collapse
Caution: proceed switching from customized builds to a "pure" ones with /data wipe!
Download:
Standard builds
Customized builds
Note: only flash kernel if the release dates of ROM and kernel are matched. Don't flash older kernels on newer ROMs, unless explicitly told. Usually dedicated kernel releases are non-regular and just for bugfixes (anyway see latests messages in the thread as I usually write what is different on these kernels). Installation order is as follows: ROM first, kernel second.
Credits:
rINanDO
A$teroid
Option58
AdrianDC
forkbomb444
Lord Boeffla
pascua28
ComicoX
Marc0601
Oebbler1
mkaluza
SergeyL
LineageOS team
Nameless ROM
I really hope I didn't miss here anyone who deserves credits for their amazing works
If you like my work and want to thank me, feel free to buy a coffee
https://paypal.me/ChronoMonochrome
Thanks to it'sup and someOn3 for donations!
Source code (standard builds):
Local manifest: LOS 15.1
Source code (customized builds):
Manifest: LOS 15.1
Device: i9300, smdk4412-common
Kernel: LOS 15.1
XDA:DevDB Information
LineageOS 15.1, ROM for the Samsung Galaxy S III I9300
Contributors
ChronoMonochrome, rINanDO, A$teroid
Source Code: https://github.com/CustomROMs
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2018-11-05
Last Updated 2019-03-05

Changelogs
Changelog
6.03.2019 - build #3a
Correct NativeWindow PixelFormat fix (should fix crashes in apps like Google Play)
Re-tune Power HAL to match build #1a (22.02.2019)
5.03.2019 - build #2a
Update sources
Switch gralloc to UMP-only allocations*
Actually include LiveDisplay HIDL this time
Dropped earlysuspend support in a favor of autosuspend (credits to @rINanDO)
Build libEGL_mali from sources & set the correct pixel format for the native window**
Fix NFC service crashes & include NFC feature
Reverted kernel ext4 fs updates***
Bluetooth: revert to LK 3.0.101****
* this should fix some artifacts like the distortion in the camera app or some apps like Chrome.
** this fixes color inversion in videos produced by Recorder app
*** recently pushed updates seems to be incomplete and according to some user report were also causing filesystem corruption...
**** a possible fix for the BT calls. Have no idea if that was broken by LK 3.4 update but lets just see if it fixes anything...
22.02.2019 - build #1a
Update sources to android-8.1.0_r52 (security patch 2019-02-05)
Fixed gralloc artefacts with HIDL addition
Update to LiveDisplay HIDL 2.0 (thanks @rINanDO)
Clean sources up to get rid of most of hacks*
Hex-edit proprietary blobs libsec-ril.so and glgps to get rid of text relocations
Added symbol required by libsec-ril.so (and removed use of now unneeded shim lib)
Added incall CPU boost hook by @arter97
Added back hotplug support to Dynamic CPU governor
Optimized Power HIDL for even better power savings
Switch to 64-bit version of binder (official addonsu now should work)
Revert sensors to Replicant OS version (+ some fixes for them to work)
* torch wakelock patch is moved to kernel, removed hack for audio playback detection and so on.
Also removed patches I found that were unused (I hope I didn't remove anything that was actually in use).
(Customized builds)
6.02.2019 - build #15
Fixed graphic artefacts (hopefully fixes lags during scrolling too)
Fixed AdvancedDisplay (mDNIe)
All credit goes to @rINanDO.
5.02.2019 - build #14
Fixed screenshot issue
Fixed vibration
Reverted Binder driver to 32-bit version
Re-tuned CPU governor for better performance
Re-enabled GPU step 3
3.02.2019 - build #13
Fixed and added back HWComposer (thanks to @rINanDO for patches)
PowerHAL && kernel CPU governor are tuned for better powersavings *
Disabled GPU step 3 for better powersavings
Switch kernel to Powersuspend driver (credits goes to Paul Reioux and Jean-Pierre Rasquin)
Build now got rid of many hacks in Android sources**
Switched to FunctionFS from legacy ADB driver (thanks to @AdrianDC for patchset)
Updated SDcardFS code from @AdrianDC Sony huashan kernel
Fixed kernel to switch to BOOTTIME support (thanks @rINanDO)
Removed any CMA-related kernel hacks for better device stability
Switched to Camera HAL2 (fixes modes like panorama in Google Camera)
Fixed broken workaround for SIM detection (again)
* Please test and give some feedback about these changes. Usage of high CPU freqs now should be limited as much as possible (it's an intended behaviour). Also this update makes PowerHAL profile working.
** Moved libc pthread hack to shim, also reverted RIL ashmem hack (thanks @javelinanddart for original commit and helping me with fixing our RIL blob).
13.01.2019 - build #12
Bring CMA enabled kernel back
Reverted to Dynamic CPU governor
Added GPU control (thanks @netarchy, Andrei F., @pascua28)
Gralloc fixes (credits to @rINanDO)
Added power HIDL (thanks @rINanDO)
Various patches for the Dialer (thanks to @SergeyL)
Fix for choppy audio playback
Added Google Camera (thanks [email protected])
Build is now signed with release keys *
Fixed (hopefully) device wake up issues **
* This should prevent the Trust from giving a warning about public keys being used. A possible fix for some apps that previously couldn't have been installed from Play Market (not tested).
** The known issue, however, is device slowness right after device first boot.
There is nothing to do, just wait until mediaserver get scanned all files and dex2oat finish apps optimization. After that the phone is responsive again.
8.01.2019 - build #11
Reverted CMA changes (build has 770 Mb RAM available) *
Set Lionheart CPU governor as default
Added Substratum theme engine support (thanks @SergeyL for patches)
Various optimizations from @SergeyL LineageOS 15.1 build
* Because of some issues (like slow device wakeup) reported, I'm reverting for now back to CMA disabled.
In case if anyone want still using kernel with CMA enabled (this build has 937 Mb RAM available), I have built a kernel, download link below:
https://www.androidfilehost.com/?fid=11410963190603893736
5.01.2019 - build #10
Fixed accelerometer issues
Enabled Contiguous Memory Allocator *
Added memory management tweaks (see 94kernel init.d script), zRAM size changed to 300 Mb
Added Torch wakelock (thanks @rINanDO)
Changed user-settable display brightness interval (thanks to @Oebbler1) **
Updated video drivers from n7100 (thanks to @pascua28)
Updated CPU voltage table from @pascua28 kernel
Fixed CPU hotplug issues on Dynamic CPU governor
Added experimental HWComposer back
* This one was a toughest thing to get to work. After some testing of various patchsets and memory management tweaks I've decided to go with the original CMA implementation (by Samsung). A short test of heavy-tasking (with Google Chrome) didn't show any lags, but I might've missed something, so your assistanse in testing / reports are welcome!
Currently available RAM is 956 Mb (compared to 776 Mb on previous build).
** Now display can be set much darker than before. Please be sure to set the display brightness higher before flashing new build (if you were already using a considerably low brigthness).
15.12.2018 - build #9
Re-add Camera2 app *
Rework memory management optimizations **
* Because of some snap issues now we again have two camera apps. I'll consider further switching to some another camera app, unless I can fix it some other way (e.g. we can try some fixes for camera HAL from Galaxy S2, which aren't currently ported to S3).
** This is just a quick rebuild in which I've reverted previously applied memory optimizations from LineageOS 16.0 and applied ones from LineageOS 15.1 build for Galaxy Ace 2. Credit goes to @SergeyL for these optimizations.
Please test and report if you feel it works better.
13.12.2018 - build #8
Fixed wifi (flashing wifi fix should be no longer needed) *
Fixed sensors (thanks @rINanDO for help)
Implemented in-kernel battery charge level LED notification
Added CPU hotplug support for Dynamic governor (ported from PegasusQ governor)
Reverted kernel timer to 200 HZ (Exynos4 default value)
Added exFAT file system support (not tested)
Fixed menu key function override (thanks @ComicoX)
* not tested. Mine S3 has semcosh radio chip, in which case flashing wifi fix was already unnecessary. Please report if wifi now works without flashing fix linked in OP.
27.11.2018 - build #7
Revert sensors updates (ambient light sensor breakage)
Small improvements to RIL workaround
Added init.d script for Boeffla Sound and Charge Level interface*
A small change in SIM detection workaround will allow to detect SIM faster if phone boots in airplane mode.
* Thanks to @Marc0601 and @NoN1979 for pointing to this script! Also thanks to @Darkened_Sky for writing this script
Known issues
AKM sensors aren't working properly. A prebuilt Akm blob we use seems to have some broken logic regarding enabling / disabling Accelerometer and Magnetometer.
26.11.2018 - build #6
GPS improvements (thanks to [email protected])
SIM card detection workaround *
Reverted SELinux changes**
Added FIOPS I/O scheduler and set as default
Added SDCard FS support
Added Boeffla Sound***
Added charge level interface (from Boeffla kernel)
Added CPU undervolting interface (and update the default UV table from @A$teroid kernel)
* A temporary solution, that basically resets the RILD daemon, but still better than nothing. After booting the phone in the airplane mode SIM card now is detected, though I could't encounter a rare case where SIM is not detected at bootup when not booting in airplane mode.
** Magisk doesn't seem to support SELinux-disabled kernels, so reverting changes from previous build.
*** Some of you asked me to add Boeffla sound - so far only kernel level is implemented, not sure about implementing an app. If anyone know an open-source app that supports Boeffla kernel features, let me know.
Known issues
AKM sensors aren't working properly. A prebuilt Akm blob we use seems to have some broken logic regarding enabling / disabling Accelerometer and Magnetometer.
18.11.2018 - build #5
Update kernel to 3.4.67. We are now using LK 3.4 sources! *
Kernel: set kernel scheduler HZ to 300 for even more smoothness
Kernel: switch to Dynamic CPU governor and tune it for i9300 (credits for this CPU governor goes to @mkaluza)
Fixed GPS
HWC is actually updated to the newest one**
Fix USB mode not to be set to charging only by default (thanks to OmniROM)
Add UMS USB mode***
Add option to disable media scaninng (not tested)
Add Signature Spoofing patch (not tested)
SELinux status spoofing (set to enforced now) ****
Add custom animation transition scales
Various fixes from AICP, OmniROM, BlissROM and other ROMs (thanks to @SergeyL for patches)
* I have been testing this kernel for a few days and hopefully fixed all the instabilities. Please report any reboots or other bugs you've found (if any).
** have forgot to remove an old HWC, so now we actually switched to HWC from experimental CM14.1 builds. Credit goes to @A$teroid for filtering out an unsupported RGB565 layers.
*** this is an experimental feature I've originally implemented for Ace 2. Make sure to safely eject your phone's SD card on the host device before unplugging the cable (otherwise it may lead even to filesystem corruption)
**** SELinux is NOT actually set to enforced mode, nor it's enabled at all, it's just a preparation for apps that may require this. You can switch it to "permissive" mode by setting a property sys.selinux_enforcing to false in build.prop:
Code:
sys.selinux_enforcing=false
P.s. I haven't been noticing any freezes nor I could reproduce it, however I've had some gralloc errors. Let's see how it's going with a new HWC (though I wouldn't think that it will solve all errors)
Known issues
SIM sometimes is not detected at device boot. It's never detected when phone is booted in the flight mode (after a flight mode is turned off).
Probably GPS could be working better (not merged @rINanDO's fixes for GPS yet)
Gralloc buffer release errors
13.11.2018 - build #4
Kernel: updates from n7100 (thanks @rINanDO)
Reset memory management config to S2 kernel
HWC: merge changes from experimental CM14.1 builds (thanks @forkbomb444)
Revert Mount Namespace / Magisk Hide patches
Revert cameraserver to a separate service
11.11.2018 - build #3
update source to 8.1.0_r50
reboots issue fix (thanks to @A$teroid for kernel patch)
9.11.2018 - build #2
fixed Calls (needs to be confirmed!)
fixed SDcard issues (thanks to @A$teroid for kernel patches)
added Magisk hide kernel patch (thanks to @A$teroid), NOT tested
fixed V-Sync issues
another minor fixes and improvements
5.11.2018 - build #1
initial release

Misc
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WiFi Fix
https://forum.xda-developers.com/showpost.php?p=69018243&postcount=274

nice work men ......

finally, thanks to all of you

WiFi does not connect...

Polis4 said:
WiFi does not connect...
Click to expand...
Click to collapse
For me it's working fine... Be sure to make a clean install, if it's still not working, please attach logcat and dmesg logs.

Finally ... Thanks alot sir ... you make S3 alive again
---------- Post added at 03:14 PM ---------- Previous post was at 03:11 PM ----------
is HW Video playback fully working ? or is it like 14.1 ?

I was coming from slim ROM. Of course I did clean install. BTW i'll try again. Thank you bro
ChronoMonochrome said:
For me it's working fine... Be sure to make a clean install, if it's still not working, please attach logcat and dmesg logs.
Click to expand...
Click to collapse

Hesham Sleem said:
Finally ... Thanks alot sir ... you make S3 alive again
---------- Post added at 03:14 PM ---------- Previous post was at 03:11 PM ----------
is HW Video playback fully working ? or is it like 14.1 ?
Click to expand...
Click to collapse
HW video playback is working, but no V-Sync support here.

why such old security patch? i get that it's a alpha but an update to newer security patch would be nice

hellcat50 said:
why such old security patch? i get that it's a alpha but an update to newer security patch would be nice
Click to expand...
Click to collapse
My primary target is to fix as most of device features as possible. I just took the LOS 15 sources for Ace 2 that were on my PC which were in a known good state (updating to a newer sources could cause an unnecessary bothering with a build errors). No matter how high is the security patch, getting a daily usable build is main aim.

ChronoMonochrome said:
My primary target is to fix as most of device features as possible. I just took the LOS 15 sources for Ace 2 that were on my PC which were in a known good state (updating to a newer sources could cause an unnecessary bothering with a build errors). No matter how high is the security patch, getting a daily usable build is main aim.
Click to expand...
Click to collapse
ok i get it, no worries. great rom so far. other than the known issues it runs better than los 14.1 so far.

great, how u made this without new kernel?

i try this rom and i will tell you :
1- ( Wifi - Bluetooth - Senseor ) work fine
2- calls don't work for me
3- alot of Graphic glitch and gallery force stop
i will give feedback as soon as possible

I installed it again (clean install) and WiFi does not connect again. Signal is dropped after make a call. Probably I have to install lineage 14.1 before install 15.1.. My previous ROM was slimrom

Is it tweaked with the go edition stuff? How's the current idle ram usage?

Sly Fox007 said:
Is it tweaked with the go edition stuff? How's the current idle ram usage?
Click to expand...
Click to collapse
Ram usage like lineage 14.1

Is fit for daily use?

rocciacoraggiosa45 said:
great, how u made this without new kernel?
Click to expand...
Click to collapse
Getting a higher kernel is not an absolute requirement, though it is highly recommended. It just could be harder to get some newer android stuff working properly with LK 3.0, but still possible.
Polis4 said:
I installed it again (clean install) and WiFi does not connect again. Signal is dropped after make a call. Probably I have to install lineage 14.1 before install 15.1.. My previous ROM was slimrom
Click to expand...
Click to collapse
It doesn't matter which ROM was installed previously. Anyway I can't say anything without any logs provided.
Sly Fox007 said:
Is it tweaked with the go edition stuff? How's the current idle ram usage?
Click to expand...
Click to collapse
All Go tweaks are enabled, except for low_ram build prop tweak (you can set this flag in build.prop, but it's arguable to advice).

[ABANDONED] crDroid v5.3 [Tissot][4.9][26/04/2019]

-BUGLIST-
Rom Specific Bugs:
Code:
You tell me!
Device Specific Bugs:
Code:
You tell me!
-GUIDES-
Firmware Update
If you are on Nov firmware :
1) Backup ur efs , modem , persist , boot from twrp.
2) Flash December firmware
3)Reboot to system
4) Flash January firmware.
If you are on December firmware :
1) Flash Jan firmware.
If you have already flashed Jan over November and broke your volte then :
BACKUP YOUR EFS , BOOT , MODEM AND PERSIST in TWRP.
1) Restore the Joey's efs backup from twrp and boot to system .
2) Flash Dec firmware and reboot to system.
3 Flash Jan firmware and reboot to system.
OR If you lose imei following the above method , restore your Jan backup and follow the procedure below:
1) Backup ur internal storage and data
2) Flash the twrp flashable fastboot rom zips from xda.(Stock pie jan)
Rebooting to system is important.
If you loose your imei and hadn't backed up your efs then pls don't contact me.
This method won't break your volte but if you flash Jan firmware over November firmware then volte will be broken.
Joeys' EFS Backup
NOV Firmware
DEC Firmware
JAN Firmware
Stock to Custom
1) Make sure your bootloader is unlocked.
2) Boot to fastboot mode by holding volume down & power button.
3) Connect Phone to pc and HOTBOOT the given twrp. (fastboot boot recovername.img)(NOT Cosmic Dan's)
4) While in twrp , FLASH twrp installer by cosmic dan.
5) Reboot to TWRP & you have installed permanent TWRP.
6) Now Flash any custom rom the usual way.
Hot boot TWRP
Cosmic Dan's TWRP Insatller

-CHANGELOGS-
Changelog(25/12/2108)
Initial Build
Changelog(31/12/2108)
Support for Dual LTE with december firmware.
All LTE bands include - With November Firmware.
Network issues fixed with improved network stability.
Added 4G+ Indication.
Added new volte icon.
Added ARCORE Support.
Inline with crDroid Changes.
Support added for FPC and Goodix fingerprint Sensors.
Included Gcam by default - Gcam-5.1.018-Pixel2Mod-Arnova8G2-V8.3b1
Improved Vibration Patter.
Improvements in system smoothness.
Battery life should be improved - Yet to be tested.
Auto Brightness Values fixed - Taken from pie stock.
Increase volume step levels - Gives more precise control now.
Added changes from kushika's and flex's kernel tree.
Dropped Enforcing Selinux From this build onwards. (FP fixes)
Many more under the hood changes for smoothness, performance and usability that will take long enough to write.
Changelog(07/01/2109)
Added two Gcams - pixel 3 and pixel 2.
Added Partial ScreenShot In Qs tiles.
Added Pixel Sounds.
Rounded Edges Added with custom settings.
Removed Sluggishness and jerks.(Rom is smoother now)
Fixed Disable Hardware keys option.
Yet again changed Volte icon.
Carbon Gestures for Three finger ScreenShot
Iniline with crDroid Changes.
Upstreamed Kernel to 4.9.148(Battery backup seems improved)
Under the hood changes for Battery Backup.
Few Under the hood optimizations.
(I have added user requested featutre , left features will be added in future builds)
Changelog(13/01/2109)
Bumped Kernel to 4.9.150
Security Patch Level 5 january
Update overlays of config from tissot PKQ1.180917.001
Update power profile from tissot PKQ1.180917.001
Fixed fpc again.
Inline with crDroid chnages
Changelog(18/01/2109)
--KERNEL SIDE CHANGES--
INFINITY Kernel
Upstreamed to 4.9.151
Added Blu Schedutil Governor
Added Boeffla Wakelock Blocker
Enforcing
Optimizations for Added smoothness and performance
--ROM SIDE CHANGES
Inline with CRDroid changes
QS Styles added
Fixed translations
Fixed FMRadio crash on saving stations
--DEVICE SIDE CHNAGES--
Rebased sources - Better stability
Fixed Double tap to wake toggle
Configs and Power profile updated from stock pie
Update Ims.apk from stock pie
Tweaked for improved smoothness
Changelog(21/01/2109)
New kernel in collaboration with Cheewaca - Extreme Infinity
Cpu overclocked slightly : 625-2323 MHz (Feel the added smoothness)
Gpu overclocked slightly : 133-700 Mhz
Undervolted for increased battery backup (You will really feel the diff.)
Fsync control
The kernel is specifically optimized for crDroid builds of tissot.
Changelog(12/02/2109)
First OFFICIAL Build
In line with crdroid v5.1 changes
Brought back battery profiles
Fixed Whatsapp Camera Bug
Removed Gcam3 for stability
Added Dirac and Mi sound enhancer
Added Wifi DIsplay
Many new customizations
Upstreamed kernel to v4.9.155
Added Battery optimizations
Added Memory optimizations
Changelog(02/03/2019)
--DEVICE SPECIFIC CHANGES--
Improved boot times
Improved app loading and installing time.
New dpi
Fixed ims registration
VoLte icon fixed for all firmwares
Wifi calling enabled
Fixed Gcam from previous build
--ROM SPECIFIC CHANGES--
Pie control
Switch style preferences
Network indicator fixed
Weather on lock screen
Full Gesture Navbar
Few under the hood fixes for thermals and more
--KERNEL SPECIFIC CHANGES--
Bumped to version 4.9.161
Few optimizations

Ss please OP!

It says its for Redmi Note 4, not Mi A1. And is it official?
Download links point to mido. Our device is Tissot. What the heck?
 @Nickinfinity

Fractals said:
It says its for Redmi Note 4, not Mi A1. And is it official?
Download links point to mido. Our device is Tissot. What the heck?
@Nickinfinity
Click to expand...
Click to collapse
was just setting up thread
its unofficial as of now

Nickinfinity said:
was just setting up thread
its unofficial as of now
Click to expand...
Click to collapse
Great job, I'm glad we finally have a maintainer for best rom ever!

kalkan001 said:
Ss please OP!
Click to expand...
Click to collapse
Added

Can I update from 4.7.2 without deleting data?

ismael chamorro said:
Can I update from 4.7.2 without deleting data?
Click to expand...
Click to collapse
No, that was oreo and it is pie. You have to clean flash

wonderful rom, even so I can not make substratum work

not at all booting , getting blank screen after flashing rom,gapps and magisk..do we need to install any firmware?
---------- Post added at 04:03 AM ---------- Previous post was at 04:00 AM ----------
was able to boot 4.7.2 and followed the same flash process
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
in think default recovery (lineage recovery) is missing in V5 rom

akashavel said:
not at all booting , getting blank screen after flashing rom,gapps and magisk..do we need to install any firmware?
---------- Post added at 04:03 AM ---------- Previous post was at 04:00 AM ----------
was able to boot 4.7.2 and followed the same flash process
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
in think default recovery (lineage recovery) is missing in V5 rom
Click to expand...
Click to collapse
please flash november firmware as well

ismael chamorro said:
wonderful rom, even so I can not make substratum work
Click to expand...
Click to collapse
Substratum is working absolutely fine. I am using it myself. Make sure u use the latest substratum apk from telegram channel.
Here are screen shots

Nickinfinity said:
Substratum is working absolutely fine. I am using it myself. Make sure u use the latest substratum apk from telegram channel.
Here are screen shots
Click to expand...
Click to collapse
akashavel said:
not at all booting , getting blank screen after flashing rom,gapps and magisk..do we need to install any firmware?
---------- Post added at 04:03 AM ---------- Previous post was at 04:00 AM ----------
was able to boot 4.7.2 and followed the same flash process
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
in think default recovery (lineage recovery) is missing in V5 rom
Click to expand...
Click to collapse
I cleaned flash the ROM just to check your issue. The ROM is booting perfectly fine for me. Make sure u use the latest firmware(Nov).

Nickinfinity said:
I cleaned flash the ROM just to check your issue. The ROM is booting perfectly fine for me. Make sure u use the latest firmware(Nov).
Click to expand...
Click to collapse
Pls provide link for Nov firmware..pls add note in post #1 and also give link

Camera features
Does Portrait mode for front camera available?

Roms is ???:good:

Hello can you tell me how is the lte network Stability?

Is seamless OTA working?

Thread title: [ROM][10.0][Unofficial] Pixel Experience Plus [H870][H872][US997]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pixel Experience Plus for LG G6
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
NFC
Lights
Sound / vibration
Known issues
BT Calling
Donate
paypal.me/alinmxda
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Downloads
DON'T FLASH GAPPS, ALREADY INCLUDED
H870 20I BOOTLOADER
H872 20A BOOTLOADER
US997 21E BOOTLOADER
PixelExperience_Plus_h870-10.0-20200326-2004-UNOFFICIAL
PixelExperience_Plus_h872-10.0-20200326-2210-UNOFFICIAL
PixelExperience_Plus_us997-10.0-20200326-2230-UNOFFICIAL
Changelog
Code:
[SIZE="4"][color=#1a73e8][B]29/12/2019[/B][/color][/SIZE]
[B]Pixel Experience changes:[/B]
[B]November changelog:[/B]
– Source Rebased and Cleaned up
– Pixel 4 goodies (Styles, Launcher, Wallpapers, Live wallpapers, Recorder and many more)
– Updated Pixel Launcher with swipe down gesture support
– Added Recorder
– November Security Patch merged
[B]December changelog:[/B]
– December Security Patch
[B]Device Changes:[/B]
- Fixed overheating issues
- Fixed high CPU usage
- Fixed camera issues
- Fixed aptX crashes
- Fixed speaker hissing noise at low volume(sound is now loud and clear)
- Removed secure_element due to it crashing
- Fixed Dolby Vision HDR
- Fixed "Constrast" mistake in LGE Device settings
- Updated DPS & ADSP & AudioFX blobs from V30B H870
- Fixed safetynet
- Update cnss-diag & cnss-daemon from V30B H870
- SElinux is permissive for now
[B]Kernel Changes:[/B]
- Updated audio codecs driver from V30A kernel
- Updated NFC driver from V30A kernel
[SIZE="4"][color=#1a73e8][B]30/12/2019[/B][/color][/SIZE]
[B]Pixel Experience changes:[/B]
-Added Pixel 4 live wallpapers
[B]Device Changes:[/B]
- Fixed Wifi Display(screen cast)
- SElinux is ENFORCING now
- Fixed safetynet
- Added battery info in Device Settings
- Increased statusbar height
- Added Open Camera
- Some other changes for A10
[SIZE="4"][color=#1a73e8][B]28/02/2020[/B][/color][/SIZE]
[B]Pixel Experience Changes:[/B]
- Latest changes merged
[B]Device Changes:[/B]
[B]- Fixed Offline Charging [Issue where touch is not working after restart from charger]
- BT calling fixed[/B]
- Decoupled AOD brightness with normal display brightness
- Fixed position of battery info
- Added Polish translation for battery strings
- NFC rework
- Uprev audio hal to 5.0
- Removed unused libs & configs
- Updated CNE / DPM blobs from LA.UM.8.6.r1-01900-89xx.0
- Updated Thermal blobs from LA.UM.8.6.r1-01900-89xx.0
- Updated Perf from LA.UM.8.6.r1-01900-89xx.0
- Updated Media blobs from V30B
- Updated Graphics stack from V30B [@331.0 06/17/19]
- Updated Power blobs from stock V30B
- Updated Sensor blobs from stock V30B
- Updated Peripheral manager blobs from stock V30B
- Updated Listen & Hotword blobs from stock V30B
- Updated Time Service blobs from stock V30B
- Updated Audio blobs from stock V30B
- Added missing Media blobs from stock V30B
- Imported Audio & Media props from stock V30B
- Imported lucye permissions from stock V30B
- Imported LGEs init scripts from stock V30B
- Sepolicy fixup after blobs update
- Fixed Time Daemon crashes
- Disabled Spectrum profiles
- Fixed time_daemon issues
- Sepolicy fixup
- Brought back Sound Trigger (Ok Google detection is still broken)
- Fixed the brightness jump on 1st step of brightness
- thermal-config.conf changes
[B]Kernel Changes:[/B]
- Updated SDfat driver to 2.3.0, this fixes large capacity SD card support
- Updated thermal driver from V30A
- Fix for soundtrigger: [Needs further testing / feedback]
- Fixed Offline Charging
[SIZE="4"][color=#1a73e8][B]26/03/2020[/B][/color][/SIZE]
[B]Pixel Experience Changes:[/B]
- Pixel Experience Plus Edition
- March Security Patch (r31 tag)
- Some features from Pixel features drop added, as they were included in the security patch
- The navbar home button circle (A.K.A OPA Layout) it’s finally there
- Added the ability of disabling pocketmode on settings (It’s enabled by default)
[B]Device Changes:[/B]
- Reverted new audio flags
- thermal-config.conf changes
- Complete RIL [telephony] rework
- Fixed GIF receiving on US997 networks
- Updated CarrierConfig from LA.UM.8.6.r1-02600-89xx.0
- Updated carrier specific overlays from marlin Q
- Sepolicy fixup
- Disabled soundtrigger
Telegram LG G6 Group: https://t.me/joinchat/ElHlskRW3-pd7_qdDRZQhw
Android OS version: 10.0.0_r31
Security patch level: March 2020
Build author/Device Maintainer: AlinM
Device Source code: https://github.com/LG-G6-DEV
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09

Is it possible to make this for the US997?

just downloaded. At the moment it seems to work well.

Thank you for this nice Pie Rom for the LG G6
Flashed it this morning. Everything seems to work except the preinstalled camera.
The ported Google-camera ( https://www.xda-developers.com/google-camera-night-sight-lg-g6-v20-v30-v35/ ) is working so far.

Thank you for this ROM.
Where can I found the OREO BOOTLOADER and how can I flash it, please ?
Thank you.

Hi, Why did you create 5 threads for what seems to be the same ROM?

tofe62 said:
Thank you for this ROM.
Where can I found the OREO BOOTLOADER and how can I flash it, please ?
Thank you.
Click to expand...
Click to collapse
ok

Rom works well got no problems, had some phone calls but everything is good, i use Nova launcher with fluid n.g and magisk with Viper4Android and the Sony music app. Its fast and good looking. Edit: Added face unlock that works well. Still looking for a good camera app.

AlexMihai26 said:
Rom works well got no problems, had some phone calls but everything is good, i use Nova launcher with fluid n.g and magisk with Viper4Android and the Sony music app. Its fast and good looking. Edit: Added face unlock that works well. Still looking for a good camera app.
Click to expand...
Click to collapse
I am using the ported Google Camera with Night Sight Mode, ported for LG. With this Cam you can use both cameras, normal and wide angle:
https://www.xda-developers.com/google-camera-night-sight-lg-g6-v20-v30-v35/

Night Light not working for me and automatic brightness is always to dark imo. Rest is working great!

Javierinnn said:
Hi, Why did you create 5 threads for what seems to be the same ROM?
Click to expand...
Click to collapse
I created just one but apparently 5 were made.

AlinM. said:
I created just one but apparently 5 were made.
Click to expand...
Click to collapse
Thanks
---------- Post added at 12:10 PM ---------- Previous post was at 12:06 PM ----------
Anyone has a fix for the camera ti work?

Javierinnn said:
Thanks
---------- Post added at 12:10 PM ---------- Previous post was at 12:06 PM ----------
Anyone has a fix for the camera ti work?
Click to expand...
Click to collapse
install gcam

Great rom! Battery isnt as good as stock oreo so far but i could be wrong. Thank you!

AllenPriestner said:
Great rom! Battery isnt as good as stock oreo so far but i could be wrong. Thank you!
Click to expand...
Click to collapse
For me performance and battery life are better than on stock.

AlinM. said:
For me performance and battery life are better than on stock.
Click to expand...
Click to collapse
I could be wrong as i say, only been using for about a day now ? performance definitely better

Just installed, coming from stock Oreo 8.0 with Nebula Kernel, wiped everything and installed with no problem.
First boot was with high temperatures on phone but I am thinking that it was because of charging and synchronizing everything at the same time.
Overall feeling is great, performance is smooth and we finally get that new gestures !
Things that I noticed and are not working:
- Slow fingerprint reader
- Too dark automatic brightness
- Night Shift/Light
- Raise to check notifications
Mainly if we could do something about AOD to use it with lower brightness it would be great ! Propably could do it with tasker to lower brightness when locked and after unlock to raise it. But this would only be workaround

Great rom! performance is much better than on stock. But i cant make GCam 6.x work. App is closing continiusly. Have you any ideas? Thanks!!

Does the Off-Mode Charging works?

Hi,
I am getting an Error 7 assert failure on the H870 with TWRP 3.2.2.
I just unlocked the bootloader and flashed TWRP coming from stock oreo. What can I do?

[ROM][OFFICIAL][kenzo/kate] HavocOS 3.12 [Q]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Havoc-OS 3.x is based on AOSP, inspired by Google Pixel.Has a refined Material Design 2 UI crafted by @SKULSHADY.Many useful features that will blow your mind.All you can dream of and all you'll ever need.Just flash and enjoy...
Lead Developers:SKULSHADY (Anushek Prasal)Support Team:theo.j22 (Tushar Jain)
If you like our work then please consider donating.PayPal: https://www.paypal.me/ANUSHEKUPI: [email protected]
ROM: Havoc for kenzo/kateRecovery: OrangeFOXGApps: BitGappsMagisk: Magisk CanaryTelegram Group: https://t.me/havoc_kenzo
1. - Be sure you have unlocked Bootloader.2. - Be sure you have a latest recovery installed(OrangeFOX 10_1 are Recommended)3. - Download the latest Havoc Rom & the latest GApps package4. - Boot into recovery5. - Backup your current ROM6. - Wipe all except micro-sd and internal storage7. - Format /Data partition (This will erase all info in your internal storage, so make backup before)8. - Reboot to recovery again (Important!)9. - Install rom, Gapps and Magisk, if you face error 20 by installing Gapps just reboot to recovery and try again.First boot may take up to 5 minutes. This is due to optimization process.
LineageOS (https://github.com/LineageOS)Crdroid (https://github.com/crdroidandroid)Pixel Experience (https://github.com/PixelExperience)Nitrogen Project (https://github.com/nitrogen-project)Omnirom (https://github.com/omnirom)MSM-Xtended Team (https://github.com/Project-Xtended)Skydragon (https://gitlab.com/HolyDragonProject)Syberia Project (https://github.com/syberia-project)And all the other Developers, Testers, Donators and Users.
https://github.com/Havoc-OSDevice TreeKernel
XDA:DevDB Information
HavocOS 3.12 kenzo, ROM for the Xiaomi Redmi Note 3
Contributors
Magicxavi, SKULSHADY
Source Code: https://github.com/Havoc-OS
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest MIUI GS 10.2.1.0
Version Information
Status: Stable
Current Stable Version: 3.12
Stable Release Date: 2021-01-14
Created 2019-12-19
Last Updated 2020-11-26

Bugs:
Goodix Fingerprint - Fixed
Sometimes screen goes blank by using PIN or Password to lock phone - Fixed
Miracast - Fixed
Encryption - Fixed
FPC Fingerprint - Fixed
Selinux Permissive

Changelogs
Updated - 14.01.21
* Updated blobs - DRM, Keystore, Gatekeeper, Time from smartron-rimo02a-8.0.0-T5524INDURC-475
* Drop TimeServices - sometimes on late boot time_genoff connection will fail and
block unlocking device. So drop TimeServices to make
this connection fail at early boot to fix issues with unlocking.
* Implemented - TimeKeep from https://github.com/LineageOS/android_hardware_sony_timekeep
to keep track of time & date alive since we drop TimeServices.
* Added audio input port for hotword implementation.
* Fixed issue when sometimes Torch is not available on encrypted devices.
* Fixed sending auth token from FingerprintDeamon (fixes problem by using Fingerprint auth in apps with Goodix)
* Updated media profiles and added performance points, and also build now G711 codec from source.
* Changed default hotspot SSID from "AndroidAp" to "Redmi Note 3 Pro"
* Kernel upstreamed with some drivers fixes
* Other "Under the hood" changes to Device Tree.
Updated - 26.11.20
* Updated blobs - IMS from xiaomi/daisy/daisy_sprout:10/QKQ1.191002.002/V11.0.11.0.QDLMIXM:user/release-keys
* Fixed dex optimization fail after blobs update
* Tuned default zram value to 1.5gb
* Disabled zswap (its old and deprecated feature, we don't need this anymore as zram is much better)
Updated - 08.11.20
* Updated blobs - Media, IMS(partially) from xiaomi/daisy/daisy_sprout:10/QKQ1.191002.002/V11.0.11.0.QDLMIXM:user/release-keys
* Fixed some errors
* Workaround for VoLTE SIM Slot switching issue
* Enabled iWlan
* Enabled new Bluetooth blobs
* Updated CarrierConfig from daisy
* Workaround for "HD capable device" notification
* Fixed FaceUnlock
Updated - 05.11.20
* Updated blobs - CNE, DPM, GNSS (Location), Time Service, Peripheral Manager, Power-OFF Alarm, Thermal, Bluetooth and QMI from xiaomi/daisy/daisy_sprout:10/QKQ1.191002.002/V11.0.11.0.QDLMIXM:user/release-keys
* Fixed a lot of logging spam (errors, warnings and other stuff)
* Enabled in kernel LMK (ALMK was disabled in last update to test how is zram working)
* Implemented HotwordEnrollment (Google Assistant is working now, but to use Voice Recognition need to make Google app as a system app)
* Fixed Power-OFF timer feature (then alarm is set for example and device is off, it will go on just in 1 minute before alarm)
* Updated configs from CAF: Carrier, GPS, TIME
* Removed some deprecated stuff to make device tree cleaner
* Some other changes to fix errors or improve device performance

Goodix fp is working or not?

Zasnizas said:
Goodix fp is working or not?
Click to expand...
Click to collapse
Unfortunately no

Ya_SG said:
Unfortunately no
Click to expand...
Click to collapse
hopefully it will be fix in the future, until then I will stay on havoc 2.5

Wi-Fi does not work.

adam5525 said:
Wi-Fi does not work.
Click to expand...
Click to collapse
Working fine

I will ask here too. I had havocos 2.9. Fingerprint / pin worked fine. I tried one of the previous havocos 3 builds (clean install) and I had problems unlocking / forced reboots in lock screen. I restored my 2.9 backup and unlock works fine on lock screen again. Many reported the same issue.
Is there any way to clean install havocos 3 again and avoid somehow this issue?

rapidm said:
I will ask here too. I had havocos 2.9. Fingerprint / pin worked fine. I tried one of the previous havocos 3 builds (clean install) and I had problems unlocking / forced reboots in lock screen. I restored my 2.9 backup and unlock works fine on lock screen again. Many reported the same issue.
Is there any way to clean install havocos 3 again and avoid somehow this issue?
Click to expand...
Click to collapse
Original post would suggest you format, not wipe, the data partition before clean flashing ROM.
Try it.

Finally its on XDA. Russian forums are very difficult to understand. I've tried this rom & its fantastic and very stable. The lockscreen bug is also fixed. Plus the edge glow during ambient display is amazingly beautiful.
Now only if privacy guard is added then Redmi note 3 will have its very own ultra stable 10 much faster than other phones. I'm also going to try the 66 hz refresh custom kernel soon.

A small request..
I wish Screen off Animation in next update like Havoc 2.9
Thanks..!!

Does anyone have a working gcam version for android q? All older versions i tried, either crash or after you take a photo the circle thing that says "processing hdr" never finishes.

jimakos98 said:
Does anyone have a working gcam version for android q? All older versions i tried, either crash or after you take a photo the circle thing that says "processing hdr" never finishes.
Click to expand...
Click to collapse
https://t.me/rn3photography/48144

HiQual said:
Original post would suggest you format, not wipe, the data partition before clean flashing ROM.
Try it.
Click to expand...
Click to collapse
Thanks for the answer. And thanks to the dev for his hard work.
Is this possible to get official status? And is it any different quality wise, official from unofficial except for the possible ota?

rapidm said:
Is this possible to get official status?
Click to expand...
Click to collapse
Some things may be broken by going Official, because there is a rule to use only original souce code from Havoc, and some things like BT calls get fixed only by modifying sources.

I have installed this rom but VoLTE is working only in sim slot 1 . I have VoLTE sim in slot 2 which I cannot move.
In Oreo & pie roms for kenzo, VoLTE is enabled for both the slots.
Could anybody tell me how to enable it for sim slot 2 ?

Pls add privacy guard and customize doze option.

Does the camera work??
Enviado desde mi Redmi Note 3 mediante Tapatalk

HavocOS v3.0 Android 10 Unofficial Build By @Magicxavi
Build Date-: 23/12/2019
Changelog For Havoc Christmas Update-:
• Added QS panel rows customization
• Added Custom duration for edge lightning
• Added Auto color option for edge lightning
• Added Ambient Visualizer
• Added Flashlight blink for call waiting
• Added Flashlight blink on incoming calls
• Added support for ADB over network
• Added ADB over network QS tile
• Added Optional screenshot type
• Added an option to change the device hostname
• Added pattern visibility settings
• Added Lock pattern grid size customization
• Improved DataSwitchTile
• Improved Lockscreen battery temperature
• Increased call log limit
• Turned off some debugging
• Updated some prebuilt apps
• Other fixes and improvements

Database Develop

welcome