[guide] workaround - no network / imei = 0 after flashing custom rom - Moto G5S Plus Guides, News, & Discussion
Hi, all
To anyone experiencing IMEI = 0, therefore no cellular network, this here is a workaround. This happened to me firsthand, and I thought I should pay it forward and share with anyone who experiences this.
Your IMEI is not lost, it's just sitting there. You can see it in fastboot using "fastboot getvar all" command, and in the "Barcode" in bootloader menu.
Any attempt in writing IMEI via QPST tool is futile, because our device is write protected.
I have recovered my IMEI by doing the following:
1. Install Validus-sanders-8.1.Beta.1.3-OFFICIAL-20180128-0506.zip
https://androidfilehost.com/?fid=818070582850488560
2. After 1st boot in Validus you will see that your IMEI is now recognized, but still you are missing 4G. To recover this, reboot to bootlaoder and reflash the modem using the following fastboot commands:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Reboot to connect to 4G.
3. Important: Reboot to TWRP and Create EFS Backup!
(Optional)
4a. Reflash stock ROM via fastboot, flash TWRP and restore your EFS partition using the backup you made.
4b. Reflash using TWRP flashable stock ROM in the thread below by @Ae3NerdGod and restore your EFS partition using the backup you made.
https://forum.xda-developers.com/mot...nps26-t3738502
Special thanks to
@Sri Datta for discovering this workaround
GZOSP and Validus Devs
@premaca and GZOSP/ Validus devs
Thanks and best regards.
gebcruz06 said:
Hi, all
To anyone experiencing IMEI = 0, therefore no cellular network, this here is a workaround. This happened to me firsthand, and I thought I should pay it forward and share with anyone who experiences this.
Your IMEI is not lost, it's just sitting there. You can see it in fastboot using "fastboot getvar all" command, and in the "Barcode" in bootloader menu.
Any attempt in writing IMEI via QPST tool is futile, because our device is write protected.
I have recovered my IMEI by doing the following:
1. Install Validus-sanders-8.1.Beta.1.3-OFFICIAL-20180128-0506.zip
https://androidfilehost.com/?fid=818070582850488560
2. After 1st boot in Validus you will see that your IMEI is now recognized, but still you are missing 4G. To recover this, reboot to bootlaoder and reflash the modem using the following fastboot commands:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Reboot to connect to 4G.
3. Important: Reboot to TWRP and Create EFS Backup!
(Optional)
4a. Reflash stock ROM via fastboot, flash TWRP and restore your EFS partition using the backup you made.
4b. Reflash using TWRP flashable stock ROM in the thread below by @Ae3NerdGod and restore your EFS partition using the backup you made.
https://forum.xda-developers.com/mot...nps26-t3738502
Special thanks to
@Sri Datta for discovering this workaround
GZOSP and Validus Devs
@premaca and GZOSP/ Validus devs
Thanks and best regards.
Click to expand...
Click to collapse
the 4g network here does not work, I've tried several tutorials
juniorhonorato1986 said:
the 4g network here does not work, I've tried several tutorials
Click to expand...
Click to collapse
What problem do you have?
No imei, no 4g, what have you done
gebcruz06 said:
Hi, all
To anyone experiencing IMEI = 0, therefore no cellular network, this here is a workaround. This happened to me firsthand, and I thought I should pay it forward and share with anyone who experiences this.
Your IMEI is not lost, it's just sitting there. You can see it in fastboot using "fastboot getvar all" command, and in the "Barcode" in bootloader menu.
Any attempt in writing IMEI via QPST tool is futile, because our device is write protected.
I have recovered my IMEI by doing the following:
1. Install Validus-sanders-8.1.Beta.1.3-OFFICIAL-20180128-0506.zip
https://androidfilehost.com/?fid=818070582850488560
2. After 1st boot in Validus you will see that your IMEI is now recognized, but still you are missing 4G. To recover this, reboot to bootlaoder and reflash the modem using the following fastboot commands:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Reboot to connect to 4G.
3. Important: Reboot to TWRP and Create EFS Backup!
(Optional)
4a. Reflash stock ROM via fastboot, flash TWRP and restore your EFS partition using the backup you made.
4b. Reflash using TWRP flashable stock ROM in the thread below by @Ae3NerdGod and restore your EFS partition using the backup you made.
https://forum.xda-developers.com/mot...nps26-t3738502
Special thanks to
@Sri Datta for discovering this workaround
GZOSP and Validus Devs
@premaca and GZOSP/ Validus devs
Thanks and best regards.
Click to expand...
Click to collapse
Thanks for this. Wish it was up when it happened to me. I was ready to try and take back the phone while it was dead and hope they didn't try to turn it on. Lol. I loose my 4g everytime and 3g sometimes after flashing. In theroy I can do this after flashing a custom rom to get my 4g back right? I hope so cause I'm gonna try it. Once again, thanks for this!
always6s said:
Thanks for this. Wish it was up when it happened to me. I was ready to try and take back the phone while it was dead and hope they didn't try to turn it on. Lol. I loose my 4g everytime and 3g sometimes after flashing. In theroy I can do this after flashing a custom rom to get my 4g back right? I hope so cause I'm gonna try it. Once again, thanks for this!
Click to expand...
Click to collapse
You don't need to do all that - just flash stock (remove SIM before flashing and pop it back in after you've booted to stock).
Phazmos said:
You don't need to do all that - just flash stock (remove SIM before flashing and pop it back in after you've booted to stock).
Click to expand...
Click to collapse
On my experience, I have flashed every stock ROM for xt1805 there is as it is my model, flashed and reflashed modems, cleared modemst1 and modemst2 to no avail. IMEI=0. I removed sim before flash and popped it after booting, but still same result. It went on for almost 2 weeks. One thing I noticed is that the modem version becomes MSM8953_27.36.07.41u while the version in the xml file in stock zip is ***.41R. I don't know what that means, I flashed the latest firmware for xt1805. I am thinking that the letter stands for your region (u=US, e=EMEA, etc). My phone now after it has regai ed IMEI is ***.41e. Maybe it's a mismatch of modem since the bad flash that wrecked my phone and it changed something that makes it swtich to the right bands. I'm not quite sure though.
gebcruz06 said:
On my experience, I have flashed every stock ROM for xt1805 there is as it is my model, flashed and reflashed modems, cleared modemst1 and modemst2 to no avail. IMEI=0. I removed sim before flash and popped it after booting, but still same result. It went on for almost 2 weeks. One thing I noticed is that the modem version becomes MSM8953_27.36.07.41u while the version in the xml file in stock zip is ***.41R. I don't know what that means, I flashed the latest firmware for xt1805. I am thinking that the letter stands for your region (u=US, e=EMEA, etc). My phone now after it has regai ed IMEI is ***.41e. Maybe it's a mismatch of modem since the bad flash that wrecked my phone and it changed something that makes it swtich to the right bands. I'm not quite sure though.
Click to expand...
Click to collapse
Fwiw - I'm in the us, my baseband is 40e, so I think you might have the us firmware.
Where did u get the firmware? And how are you flashing it?
Edit , just noticed your baseband is 41e , disregard the above - but - do answer the questions.
Phazmos said:
Fwiw - I'm in the us, my baseband is 40e, so I think you might have the us firmware.
Where did u get the firmware? And how are you flashing it?
Edit , just noticed your baseband is 41e , disregard the above - but - do answer the questions.
Click to expand...
Click to collapse
Q: Where did u get the firmware?
A: I got the firmware I am using here:
https://androidfilehost.com/?fid=889964283620776326
Q: And how are you flashing it?
A: I am flashing it by following the sequence in flashfile.xml. I put it in a proper syntax in notepad and paste it line by line.
gebcruz06 said:
Q: Where did u get the firmware?
A: I got the firmware I am using here:
https://androidfilehost.com/?fid=889964283620776326
Q: And how are you flashing it?
A: I am flashing it by following the sequence in flashfile.xml. I put it in a proper syntax in notepad and paste it line by line.
Click to expand...
Click to collapse
Sounds like the flash procedure is correct , as long as each step flashed successfully.
I believe you mentioned flashing every firmware available - including from firmware center?
If so - all I can say its contact your carrier - if it was ok out of the box, and you've flashed the original firmware, it should work again.
Good luck!
not woring jio sim
umair09 said:
not woring jio sim
Click to expand...
Click to collapse
If u went to service centre for fixing volte then pls share Ur experience here
Your link to my twrp stock zip 404's, just saying.
I am following this so far, but i can't figure out where you got those files from:
fastboot flash modemNON-HLOS.bin fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Are they from the ROM you decided to be your Stock ROM? Because the Custom ROM doesn't contain those. And i am not sure i want to put just some random ROM Files in there...
Thanks for the help you provided with this Thread so far anyway =)
Edit: I tried it with the Files from the Stock ROM and it actually worked =)
Phazmos said:
You don't need to do all that - just flash stock (remove SIM before flashing and pop it back in after you've booted to stock).
Click to expand...
Click to collapse
I got my 4g back but I still lose it when I flash a custom ROM. I've tried flashing the room then restoring my efs. Nothing. Taking out sim card for flash then reinserting it. Nothing. I can get 3g just fine in all roms but 4g only in stock.......
always6s said:
I got my 4g back but I still lose it when I flash a custom ROM. I've tried flashing the room then restoring my efs. Nothing. Taking out sim card for flash then reinserting it. Nothing. I can get 3g just fine in all roms but 4g only in stock.......
Click to expand...
Click to collapse
When will u install custom rom.. after that just do 1 thing open bootloader menu and paste this commonds.... 1. fastboot erase modemst1
2. fastboot erase modemst2
Tadaaa you get 3g and 4g network
Thanks..Successfully did But VOLTE is not working...
gebcruz06 said:
Hi, all
To anyone experiencing IMEI = 0, therefore no cellular network, this here is a workaround. This happened to me firsthand, and I thought I should pay it forward and share with anyone who experiences this.
Your IMEI is not lost, it's just sitting there. You can see it in fastboot using "fastboot getvar all" command, and in the "Barcode" in bootloader menu.
Any attempt in writing IMEI via QPST tool is futile, because our device is write protected.
I have recovered my IMEI by doing the following:
1. Install Validus-sanders-8.1.Beta.1.3-OFFICIAL-20180128-0506.zip
https://androidfilehost.com/?fid=818070582850488560
2. After 1st boot in Validus you will see that your IMEI is now recognized, but still you are missing 4G. To recover this, reboot to bootlaoder and reflash the modem using the following fastboot commands:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Reboot to connect to 4G.
3. Important: Reboot to TWRP and Create EFS Backup!
(Optional)
4a. Reflash stock ROM via fastboot, flash TWRP and restore your EFS partition using the backup you made.
4b. Reflash using TWRP flashable stock ROM in the thread below by @Ae3NerdGod and restore your EFS partition using the backup you made.
https://forum.xda-developers.com/mot...nps26-t3738502
Special thanks to
@Sri Datta for discovering this workaround
GZOSP and Validus Devs
@premaca and GZOSP/ Validus devs
Thanks and best regards.
Click to expand...
Click to collapse
Thanks..Successfully did But VOLTE is not working.
---------- Post added at 09:44 AM ---------- Previous post was at 09:41 AM ----------
umair09 said:
not woring jio sim
Click to expand...
Click to collapse
Hi i did successfully ,network is coming but my jio sim is not working..i mean i am unable receive or make the calls ...what should we do...please reply immediately..
I have tried everything. Restoring efs. Flash non hlos. Erasing modemst. I cannot get my 4g back after flashing custom ROM. So so aggravated. 3g sucks so I can't run a rom that won't do 4g. If any new info comes up someone please let me know.
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Kdemwa said:
When will u install custom rom.. after that just do 1 thing open bootloader menu and paste this commonds.... 1. fastboot erase modemst1
2. fastboot erase modemst2
Tadaaa you get 3g and 4g network
Click to expand...
Click to collapse
Tried that. Nothing still just 3g.
Always6z said:
I have tried everything. Restoring efs. Flash non hlos. Erasing modemst. I cannot get my 4g back after flashing custom ROM. So so aggravated. 3g sucks so I can't run a rom that won't do 4g. If any new info comes up someone please let me know.
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Tried that. Nothing still just 3g.
Click to expand...
Click to collapse
Try *#*#4636#*#*
Sri Datta said:
Try *#*#4636#*#*
Click to expand...
Click to collapse
Then what?
I am.coming from regular Moto G5 where this was a problem too. The solution over there was, if you are on a custom 8.x oreo rom, you needed, before going to stock, flash 32 bit twrp and a 32 bit rom. Then, after first boot, you could go back to stock with no problems. Just got this one and not planning to move from stock as I feel official oreo is right at the corner, but give it a try like this and report back if you were able to
Related
[guide] workaround - no network / imei = 0 after flashing custom rom
Hi, all To anyone experiencing IMEI = 0, therefore no cellular network, this here is a workaround. This happened to me firsthand, and I thought I should pay it forward and share with anyone who experiences this. Your IMEI is not lost, it's just sitting there. You can see it in fastboot using "fastboot getvar all" command, and in the "Barcode" in bootloader menu. Any attempt in writing IMEI via QPST tool is futile, because our device is write protected. I have recovered my IMEI by doing the following: 1. Install Validus-sanders-8.1.Beta.1.3-OFFICIAL-20180128-0506.zip https://androidfilehost.com/?fid=818070582850488560 2. After 1st boot in Validus you will see that your IMEI is now recognized, but still you are missing 4G. To recover this, reboot to bootlaoder and reflash the modem using the following fastboot commands: fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn Reboot to connect to 4G. 3. Important: Reboot to TWRP and Create EFS Backup! (Optional) 4a. Reflash stock ROM via fastboot, flash TWRP and restore your EFS partition using the backup you made. 4b. Reflash using TWRP flashable stock ROM in the thread below by @Ae3NerdGod and restore your EFS partition using the backup you made. https://forum.xda-developers.com/mo...rom-sanders-stock-7-1-1-rooted-nps26-t3738502 Special thanks to @Sri Datta for discovering this workaround GZOSP and Validus Devs @premaca and GZOSP/ Validus devs Thanks and best regards.
duplicate thread closed, same thread in GUIDES section
'No Sim Card/No Signal' after flashing Stock ROM - (IMEI IS NOT GONE)
First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'. Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL, I was getting 'Call Ended' Error. So i decided to flash ORIGINAL ROM via fastboot. When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card. Now i have Original ROM with 'NO SIM CARD' error. And I tried to Search Network 'Manually' and 'Automatically', both didnt work. What to do now?
Keyur Sureliya said: First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'. Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL, I was getting 'Call Ended' Error. So i decided to flash ORIGINAL ROM via fastboot. When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card. Now i have Original ROM with 'NO SIM CARD' error. And I tried to Search Network 'Manually' and 'Automatically', both didnt work. What to do now? Click to expand... Click to collapse Is your network Volte? Did you took backup after installing TWRP, if you have backup of efs and persist, most likely you'll get back your Volte on restoring.
I have the same issue but i find solution Step by step: 1. Flash TWRP. 2. Flash Pixel Experience rom if we haven't flashed yet. 3. Turn on phone with flashed rom to obtain network signal 4. Here we will get the IMEI and only have 3g signal, so we need to restart the phone in bootloader mode and type in fastboot "fastboot erase modemst1" and "fastboot erase modemst2", and reboot again 5.turn off and into recovery, go to buckup and Select only EFS and save in your sd card 6.flash rom stock,and turn on your phone 7.turn off and get into recovery,restore your buckup 8.reboot Sent from my Moto G5S Plus using XDA Labs
Keyur Sureliya said: First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'. Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL, I was getting 'Call Ended' Error. So i decided to flash ORIGINAL ROM via fastboot. When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card. Now i have Original ROM with 'NO SIM CARD' error. And I tried to Search Network 'Manually' and 'Automatically', both didnt work. What to do now? Click to expand... Click to collapse As it is not potter but sanders i can't refer my posts because it is for potter. But i can help. Telegram me : http://t.me/i_am_geekofia
diegomartinezlovey said: I have the same issue but i find solution Step by step: 1. Flash TWRP. 2. Flash Pixel Experience rom if we haven't flashed yet. 3. Turn on phone with flashed rom to obtain network signal 4. Here we will get the IMEI and only have 3g signal, so we need to restart the phone in bootloader mode and type in fastboot "fastboot erase modemst1" and "fastboot erase modemst2", and reboot again 5.turn off and into recovery, go to buckup and Select only EFS and save in your sd card 6.flash rom stock,and turn on your phone 7.turn off and get into recovery,restore your buckup 8.reboot Click to expand... Click to collapse Thank you, it worked, but now i can't call or receive call, and network is reconnecting every few mins. And another new problem I'm facing is now Battery is draining too fast!
GEEKOFIA said: As it is not potter but sanders i can't refer my posts because it is for potter. But i can help. Telegram me : http://t.me/i_am_geekofia Click to expand... Click to collapse "No username found." Is there any other username of yours in telegram?
Keyur Sureliya said: "No username found." Is there any other username of yours in telegram? Click to expand... Click to collapse my bad i changed it to https://t.me/Rage_Demon. join group here https://t.me/geekofia.
Keyur Sureliya said: First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'. Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL, I was getting 'Call Ended' Error. So i decided to flash ORIGINAL ROM via fastboot. When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card. Now i have Original ROM with 'NO SIM CARD' error. And I tried to Search Network 'Manually' and 'Automatically', both didnt work. What to do now? Click to expand... Click to collapse New Discoveries: Problem of "Unable of Call OR Receive Call AND SMS" is ONLY IN JIO SIM CARD, I tried Airtel SIM and Its working fine, BUT Network is getting Disconnected frequently on its own EVERY FEW MINS. The Problem of Not be able to CALL OR SMS is because now "Enhanced 4G LTE" option is GONE in Stock ROM.
My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom. You need to be careful when flashing stock roms to make sure you have the right model and region. Here's what I did, I hope it helps: First find out the correct model, mine is XT1805 (Europe, dual sim) Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/" Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn" Flash using fastboot: fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again
coldhx said: My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom. You need to be careful when flashing stock roms to make sure you have the right model and region. Here's what I did, I hope it helps: First find out the correct model, mine is XT1805 (Europe, dual sim) Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/" Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn" Flash using fastboot: fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again Click to expand... Click to collapse did you get signal now ??
Yo tuve el mismo problema y mi solicion fue instalar todas las actualizaciones de sistema, cada vez que instalo una nueva ROM tengo que instalar todas las actualizaciones de sistema para tener de nuevo conección con mi simcard
I have the same problem "no sim inserted". I don't want to install any other ROMs, just want the signal back. Please help if anyone has the fix.
Purple_Panda said: I have the same problem "no sim inserted". I don't want to install any other ROMs, just want the signal back. Please help if anyone has the fix. Click to expand... Click to collapse Hope this can help https://forum.xda-developers.com/g5-plus/how-to/fixed-flash-stock-firmware-moto-g5-plus-t3763606
This happened to me after going back to Tmo from Retus.
coldhx said: My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom. You need to be careful when flashing stock roms to make sure you have the right model and region. Here's what I did, I hope it helps: First find out the correct model, mine is XT1805 (Europe, dual sim) Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/" Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn" Flash using fastboot: fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again Click to expand... Click to collapse Thank you. Those little adb commands worked like magic for me
coldhx said: My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom. You need to be careful when flashing stock roms to make sure you have the right model and region. Here's what I did, I hope it helps: First find out the correct model, mine is XT1805 (Europe, dual sim) Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/" Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn" Flash using fastboot: fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again Click to expand... Click to collapse same problem here, this logo after installing the Havoc OS, someone found a solution, performed the procedures that passed but the same problem continues ---------- Post added at 04:50 PM ---------- Previous post was at 03:59 PM ---------- coldhx said: My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom. You need to be careful when flashing stock roms to make sure you have the right model and region. Here's what I did, I hope it helps: First find out the correct model, mine is XT1805 (Europe, dual sim) Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/" Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn" Flash using fastboot: fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again Click to expand... Click to collapse same problem here, this logo after installing the Havoc OS, someone found a solution, performed the procedures that passed but the same problem continues
hello please help i have a moto g5s i downgrade to 7.1.1 follow this tutorial, imei and baseband OK, but no signal, i tried with different flashes, and not work, when i return to 8.1 rom signal ok, but touchscreen dont work...
diegomartinezlovey said: I have the same issue but i find solution Step by step: 1. Flash TWRP. 2. Flash Pixel Experience rom if we haven't flashed yet. 3. Turn on phone with flashed rom to obtain network signal 4. Here we will get the IMEI and only have 3g signal, so we need to restart the phone in bootloader mode and type in fastboot "fastboot erase modemst1" and "fastboot erase modemst2", and reboot again 5.turn off and into recovery, go to buckup and Select only EFS and save in your sd card 6.flash rom stock,and turn on your phone 7.turn off and get into recovery,restore your buckup 8.reboot Sent from my Moto G5S Plus using XDA Labs Click to expand... Click to collapse erasing 'modemst1'... FAILED (remote: Error: This image isn't allow download )
Problem solved .. i flashed stock august 19 using codes fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash recovery recovery.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash system system.img_sparsechunk.9 fastboot flash system system.img_sparsechunk.10 fastboot flash oem oem.img fastboot erase DDR fastboot erase cache fastboot erase userdata fastboot oem fb_mode_clear fastboot reboot then after first boot again flash this coades fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn fastboot reboot baseband and imei showing Keyur Sureliya said: First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'. Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL, I was getting 'Call Ended' Error. So i decided to flash ORIGINAL ROM via fastboot. When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card. Now i have Original ROM with 'NO SIM CARD' error. And I tried to Search Network 'Manually' and 'Automatically', both didnt work. What to do now? Click to expand... Click to collapse
Same here :/
Lost imei please help me guys for 1 month i am using my phone as paper weight :((
Guys i lost my imei 1st im downgrading from pixel rom to stock via fastboot then i recoverd it via rr rom flashing but there is no volte and lte so i just backed up my efs,then flashed presist got from xda thread after that lost all restoring efs partition showing 0000000001 as imei ( nothing works (( anyone here helping minded i will share efs can if that get worked then i can conform that is presist issue please help me
will you try my persist.img and modem.img files. I can upload if you wanna flash 'em 5P4RT0N said: Guys i lost my imei 1st im downgrading from pixel rom to stock via fastboot then i recoverd it via rr rom flashing but there is no volte and lte so i just backed up my efs,then flashed presist got from xda thread after that lost all restoring efs partition showing 0000000001 as imei ( nothing works (( anyone here helping minded i will share efs can if that get worked then i can conform that is presist issue please help me Click to expand... Click to collapse I've backed up persist.img modem.img modemst1.img and modemst2.img from NPSS26.116-61-8 firmware
sachinsmac said: I've backed up persist.img modem.img modemst1.img and modemst2.img from NPSS26.116-61-8 firmware Click to expand... Click to collapse yes of course gemme the link
I'm unable to post link bro ---------- Post added at 04:27 AM ---------- Previous post was at 04:14 AM ---------- Code: fastboot erase persist fastboot erase modemst1 fastboot erase modemst2 fastboot flash persist persist.img fastboot flash modemst1 modemst1.img fastboot flash modemst2 modemst2.img fastboot flash modem modem.img
some changes happens but still no imei previous 000000001... now 0034001 something https://pasteboard.co/HuwtrgU.png
Recover IMEI via Chamelephon app. I probably know a simple fix for that! I too lost my IMEI of my smartphone so what I did was - · Root your smartphone. · Install Chamelephon app from Play Store. https://play.google.com/store/apps/details?id=com.cryptotel.chamelephon · Open the app and grant root access. · Now enter both IMEI into the text box. If you don't know your IMEI, just check your phone's retail box where the pricing and all other stuff is mentioned. There your IMEI should be mentioned. (Or you can just enter any random IMEI if it's legal) · Now tap the reboot option. · Your phone will now reboot and BOOM ?... your IMEI should come back. Hope it works for you. (Tested on my Micromax Unite 2.)
Don't use things not designed for your device
No Voice calls after flashing stock rom
Hey folks! I need some help here. First, my device is an Moto G6 XT1925-3 and I'm using PPS29.55-37-7 stock rom. I've unlocked my bootloader but I had problems doing this, so I flashed the same rom. After this, I successfully rooted my device but, normal calls through 4g/3g are working without any sound. WhatsApp calls, or any media app is working properly, only calls trough 4g/3g are muted. My question is: can I flash only modems partitions? I don't wanna loose any data and personal files. If I go to settings>about phone my IMEI is listed normally. 4g volte is enabled. Data connection is perfect. Recently Motorola has launched a new software, PPSS29.55-37-7-2 and I wanna know too if I can root this version, or, I can upgrade to this version without loose personal data through fastboot. Thanks in advance and sorry for grammar mistakes. English is my second language.
mdlgpt said: Hey folks! I need some help here. First, my device is an Moto G6 XT1925-3 and I'm using PPS29.55-37-7 stock rom. I've unlocked my bootloader but I had problems doing this, so I flashed the same rom. After this, I successfully rooted my device but, normal calls through 4g/3g are working without any sound. WhatsApp calls, or any media app is working properly, only calls trough 4g/3g are muted. My question is: can I flash only modems partitions? I don't wanna loose any data and personal files. If I go to settings>about phone my IMEI is listed normally. 4g volte is enabled. Data connection is perfect. Recently Motorola has launched a new software, PPSS29.55-37-7-2 and I wanna know too if I can root this version, or, I can upgrade to this version without loose personal data through fastboot. Thanks in advance and sorry for grammar mistakes. English is my second language. Click to expand... Click to collapse Sure run Code: fastboot getvar all To verify the codename and software channel As described in my Motorola Flashing Guide https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039 Then find the correct firmware here https://mirrors.lolinet.com/firmware/moto Then flash Code: fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn If that doesn't work Flash the full firmware just skip the wipe user data command Sent from my mata using XDA Labs
..
sd_shadow said: Sure run Code: fastboot getvar all To verify the codename and software channel As described in my Motorola Flashing Guide https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039 Then find the correct firmware here https://mirrors.lolinet.com/firmware/moto Then flash Code: fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn If that doesn't work Flash the full firmware just skip the wipe user data command Sent from my mata using XDA Labs Click to expand... Click to collapse Hey Bro! Thanks a lot for your help! But was unsuccessful. I flashed modem partitions but i'm facing the same problem. Before I flash all system, a question: my root will be removed? I ask this because I think magisk do some modifications to /system partition, so is really a pain root this OS, hehe Just one more, if you allow me: To update to lastest security update I'll download lastest zip, and flash all partitions, but without erase userdata, right? Then, if I wanna my device rooted, i have to do all root process again right? Finally, thanks a lot. I have to attend a lot of calls in my number but i'm facing this problem about 2 months now. This is really freaking me out because i work with that phone. thanks a lot again!
UPDATE: finally i got working! was a problem with "dsp" partition, in bat file that ive downloaded, the flash command to dsp was wrong. I found the answer here: https://forum.xda-developers.com/moto-g6/help/moto-g6-call-issues-t4000907
mdlgpt said: UPDATE: finally i got working! was a problem with "dsp" partition, in bat file that ive downloaded, the flash command to dsp was wrong. I found the answer here: https://forum.xda-developers.com/moto-g6/help/moto-g6-call-issues-t4000907 Click to expand... Click to collapse Yes, I don't use .bat files Learn the fastboot commands They are not that hard. Sent from my mata using XDA Labs
mdlgpt said: UPDATE: finally i got working! was a problem with "dsp" partition, in bat file that ive downloaded, the flash command to dsp was wrong. I found the answer here: https://forum.xda-developers.com/moto-g6/help/moto-g6-call-issues-t4000907 Click to expand... Click to collapse Thanks for sharing!
No wifi after going back to stock rom
Hi! I had installed leage OS but decided to go back to stock rom. I downloaded and installed the correct firmware, but when it turned on it seems like wifi is not working anymore. I read that this happens sometimes when going back to stock rom, as something related to persist.img gets lost, but I don't know much about this topic. I just found I have to somehow flash persist.img, but I already downloaded two different versions of the firmware and that file is not included. Any help would be appreciated! Thanks!
Did you ever find a fix to this? I am having similar issues. I went back to stock and cannot get wifi to turn on. I checked my /persist/wifi/ folder and it is empty. Can someone with a working wifi tell me what's located in that folder. Thanks!
If you downgraded when you went back to stock from a previous stock you had before the custom ROM you may have deleted your modem files....either you can restore efs only from a previous TWRP backup or run these lines in fastboot from the latest updated firmware.... fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn Reboot and should be great....use twrp and get a backup of efs if u haven't already and save it for when it ever happens again and you may not have PC access so u can fix from TWRP
chrisb22 said: Did you ever find a fix to this? I am having similar issues. I went back to stock and cannot get wifi to turn on. I checked my /persist/wifi/ folder and it is empty. Can someone with a working wifi tell me what's located in that folder. Thanks! Click to expand... Click to collapse There is nothing in that folder
KtownJeff said: If you downgraded when you went back to stock from a previous stock you had before the custom ROM you may have deleted your modem files....either you can restore efs only from a previous TWRP backup or run these lines in fastboot from the latest updated firmware.... fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn Reboot and should be great....use twrp and get a backup of efs if u haven't already and save it for when it ever happens again and you may not have PC access so u can fix from TWRP Click to expand... Click to collapse Thanks!!!!! This worked like a charm.