Related
After following the Omni 4.4 Nightlies thread, I thought it would help some people (noobs like me) to have some guidance about how to install Omni in your device and making it easier to get what's needed to make it work. Still, this is not an "official guide", just the procedure I use to flash every day's nightly and I'm open to suggestions and corrections. Also, the resourses quoted here are not my work, just links to the work of the amazing devs in Xda and out there in the Android development world.
Hope it helps. Don't forget to hit "Thanks" in case it was.
Important: be wise and don't go for anything you are not sure about. I can't be held responsible for the results, remember that you are flashing a Custom (Beta stage) ROM, and even when not likely, things can go wrong. If you are unsure about anything, just ask and/or search the forum and the net for other's experience and knowledge, that's the way to go (and learn).
Suggested procedure (updated to November the 30th 2013)
Be sure to check the official thread for lastest news and guidance here.
DOWNLOADS
1) THE RIGHT RECOVERY - Your device must be rooted and running CWM Recovery 6.0.3.2+ or latest TWRP. Latest Philz Recovery is reported to be working too if you prefer. If aren't on CWM/Philz's or not on the right version, you can find a guide to get it and install it here. The safe way to go is to follow any of the procedures listed there. There are also many threads in XDA offering the flashable zip, but if you go down that way, be sure you choose the right version.
2) GET OMNI - Download the latest Omni 4.4 for I9300 Nightly here
3) GET GAPPS - Download the 4.4 Gapps of your choice:
PA Gapps (recommended by XpLoDWilD)
Spec Gapps
Banks Gapps
Any other 4.4 Gapps of your choice (must be 4.4, earlier versions won't work or give you some mean headaches)
4) CUSTOM KERNEL (optional) - If you want to use a custom kernel, download one that you know it's compatible. If you don't know what this means or you are not 100% sure about what you are doing, it would be safer to skip this step. You can explore Xda I9300 forum for info about Custom Kernels if you like.
5) UPDATE SUPERSU - Download the latest Supersu here. Get the Zip to be flashed via CWM. At the moment, the latest can be found here.
INSTALLING
1) If you had to install CWM or Philz, make sure it's done and working.
2) WIPING - Get into recovery. Be sure you make a nandroid backup in case things go wrong. Then, it's time for some wiping. The safer way to go is a Full Wipe, and that means Wiping Data, Cache, and Dalvik. Beware this will result in loosing some user data if you don't got a backup of them (I'd recommend moving anything you want to keep into SD, since Titanium is never a neat choice when flashing a new ROM, you'd probably get your beautiful clean new install dirty if you go that way). Back to wiping, I usually format /system too, just in case.
3) FLASH OMNI - Find and flash the downloaded Omni Build.
4) FLASH GAPPS.
5) FLASH CUSTOM KERNEL (optional) - if you've chosen to do so (should be done before flashing SuperSu Update).
6) FLASH SUPERSU UPDATE.
7) (Optional) Wipe Cache and Dalvik once more. I'm not sure if this is required, just found out it solved some FCs sometimes and since then I do it allways.
8) Reboot.
Post-Installing (Absolutely Optional, but maybe useful)
1) Once you've booted and are past the Gapps Google login and stuff, you might want to install Xposed Framework, in case you use Greenify Pro or just want to access some more customization moduldes. If that's what you want, get the latest 4.4 compatible XPosed Installer APK here and run it. There you need to install the framework and if no errors arise, voilá, you got it. It's reported that you need to set RW privileges to let this happen, if that's the case, you need any root explorer (ES or any other) to do it. And if you aren't able to do so, or still got trouble, you can install BusyBox Installer from the PlayStore, and duh, install it. Or you can just take the advice found here to get that done. Then you'll be able to get /system RW privleges and install Xposed Framework. After doing it, you'll need to reboot, thought.
2) Installing GravityBox or any other Xposed module you want. Gravity is a nice collection of customization options that has been updated recently to support Kitkat. If any others become compatible too, or you want to try any available module to see if it works with 4.4 too, assume the risks and go ahead. Yet, many will become compatible soon, perhaps it would be wiser to wait for that to happen. Back to Gravity, you just need to get it here (make sure to get the last version), install it, enable the Module at Xposed Installer, and reboot.
And that's it. Course you can do plenty of other stuff to your lovely Omni 4.4 Build, but that's up to you. Hope this was of some help and I'm open to any feedback to update the guide and make it better. And in case you spot any mistakes, please let me know. I'm not a dev, just a noob trying to make other noob's life easier.
Enjoy!
Very good guide
Inviato dal mio GT-I9300 utilizzando Tapatalk
Nicely done. Enough info for those who're new to omnirom (like me).
Sent from my GT-I9300 using Tapatalk
Question on Gravitybox. I've installed the Xposed installed, Gravitybox 2.7.6 and ticked on the module, the problem is when Gravitybox opens, it says that Gravitybox System Framework is not responding. What do you think I should do?
fermasia said:
After following the Omni 4.4 Nightlies thread, I thought it would help some people (noobs like me) to have some guidance about how to install Omni in your device and making it easier to get what's needed to make it work. Still, this is not an "official guide", just the procedure I use to flash every day's nightly and I'm open to suggestions and corrections. Also, the resourses quoted here are not my work, just links to the work of the amazing devs in Xda and out there in the Android development world.
Hope it helps. Don't forget to hit "Thanks" in case it was.
Important: be wise and don't go for anything you are not sure about. I can't be held responsible for the results, remember that you are flashing a Custom (Alpha stage) ROM, and even when not likely, things can go wrong. If you are unsure about anything, just ask and/or search the forum and the net for other's experience and knowledge, that's the way to go (and learn).
Suggested procedure (updated to November the 27th 2013)
Be sure to check the official thread for lastest news and guidance here.
DOWNLOADS
1) THE RIGHT RECOVERY - Your device must be rooted and running CWM Recovery 6.0+. Latest Philz Recovery is reported to be working too if you prefer. If aren't on CWM/Philz's or not on the right version, you can find a guide to get it and install it here. The safe way to go is to follow any of the procedures listed there. There are also many threads in XDA offering the flashable zip, but if you go down that way, be sure you choose the right version.
2) GET OMNI - Download the latest Omni 4.4 for I9300 Nightly here
3) GET GAPPS - Download the 4.4 Gapps of your choice:
PA Gapps (recommended by the op)
Spec Gapps
Banks Gapps
Any other 4.4 Gapps of your choice (must be 4.4, earlier versions will likely give you some headaches)
4) CUSTOM KERNEL (optional) - If you want to use a custom kernel, download one that you know it's compatible. If you don't know what this means or you are not 100% sure about what you are doing, it would be safer to skip this step. You can explore Xda I9300 forum for info about Custom Kernels if you like.
5) UPDATE SUPERSU - Download the latest Supersu here. Get the Zip to be flashed via CWM. At the moment, the latest can be found here.
INSTALLING
1) If you had to install CWM or Philz, make sure it's done and working.
2) WIPING - Get into recovery. Now it's time for wiping. The safer way to go is a Full Wipe, and that means Wiping Data, Cache, and Dalvik. Beware this will result in loosing some user data if you don't got a backup of them (I'd recommend moving anything you want to keep into SD, since Titanium is never a neat choice when flashing a new ROM, you'd probably get your beautiful clean new install dirty if you go that way. Back to wiping, I usually format /system too, just in case. Be sure you make a nandroid backup in case things go wrong.
3) FLASH OMNI - Find and flash the downloaded Omni Build.
4) FLASH GAPPS.
5) FLASH CUSTOM KERNEL (optional) - if you've chosen to do so (should be done before flashing SuperSu Update).
6) FLASH SUPERSU UPDATE.
7) (Optional) Wipe Cache and Dalvik once more. I'm not sure if this is required, just found out it solved some FCs sometimes and since then I do it allways.
8) Reboot.
Post-Installing (Absolutely Optional, but maybe useful)
1) Once you've booted and are past the Gapps Google login and stuff, you might want to install Xposed Framework, in case you use Greenify Pro or just want to access some more customization moduldes. If that's what you want, get the latest 4.4 compatible XPosed Installer APK here and run it. There you need to install the framework and if no errors arise, voilá, you got it. It's reported that you need to set RW privileges to let this happen, if that's the case, you need any root explorer (ES or any other) to do it. And if you aren't able to do so, or still got trouble, you can install BusyBox Installer from the PlayStore, and duh, install it. Or you can just take the advice found here to get that done. Then you'll be able to get /system RW privleges and install Xposed Framework. After doing it, you'll need to reboot, thought.
2) Installing GravityBox or any other Xposed module you want. Gravity is a nice collection of customization options that has been updated recently to support Kitkat. If any others become compatible too, or you want to try any available module to see if it works with 4.4 too, assume the risks and go ahead. Yet, many will become compatible soon, perhaps it would be wiser to wait for that to happen. Back to Gravity, you just need to get it at the PlayStore, install it, enable the Module at Xposed Installer, and reboot.
And that's it. Course you can do plenty of other stuff to your lovely Omni 4.4 Build, but that's up to you. Hope this was of some help and I'm open to any feedback to update the guide and make it better. And in case you spot any mistakes, please let me know. I'm not a dev, just a noob trying to make other noob's life easier.
Enjoy!
Click to expand...
Click to collapse
carlallanvela said:
Question on Gravitybox. I've installed the Xposed installed, Gravitybox 2.7.6 and ticked on the module, the problem is when Gravitybox opens, it says that Gravitybox System Framework is not responding. What do you think I should do?
Click to expand...
Click to collapse
Should I assume you: got an i9300, installed following the procedure, did all the wipes, are on the latest (27th) nightly, got the right Xposed Framework installed successfully with no errors, rebooted, installed gravity last version (2.7.6), enabled the gravity module, rebooted again? If so, and can't live without Gravity till next nightly, I'm not sure what else to suggest but reinstall from scratch and try again.
I got it. Looks like I used Xposed Firmware not Installer. Got it working.
fermasia said:
Should I assume you: got an i9300, installed following the procedure, did all the wipes, are on the latest (27th) nightly, got the right Xposed Framework installed successfully with no errors, rebooted, installed gravity last version (2.7.6), enabled the gravity module, rebooted again? If so, and can't live without Gravity till next nightly, I'm not sure what else to suggest but reinstall from scratch and try again.
Click to expand...
Click to collapse
carlallanvela said:
I got it. Looks like I used Xposed Firmware not Installer. Got it working.
Click to expand...
Click to collapse
Cheers :good:
fermasia said:
Cheers :good:
Click to expand...
Click to collapse
This is brilliant. Maybe add the list of known bugs and as they are fixed, you can cross them out, Would definately keep the main thread cleaner. Well done :good:
cornelha said:
This is brilliant. Maybe add the list of known bugs and as they are fixed, you can cross them out, Would definately keep the main thread cleaner. Well done :good:
Click to expand...
Click to collapse
Would be very interesting, but I guess it would be a bit tricky to keep up with known issues and resolution, unless there's somewhere I can check for that information. I guess that would be in the better hands of the devs that are after bugs and solutions on a daily basis. But still, if there's any way I can help keep track and inform about that, I'd be happy to help.
fermasia said:
Would be very interesting, but I guess it would be a bit tricky to keep up with known issues and resolution, unless there's somewhere I can check for that information. I guess that would be in the better hands of the devs that are after bugs and solutions on a daily basis. But still, if there's any way I can help keep track and inform about that, I'd be happy to help.
Click to expand...
Click to collapse
It's all over the Omni Thread. The devs are way too busy building the rom and sorting out bugs. The most common ones relate to Google Services battery drain. Camera issues and root.
cornelha said:
It's all over the Omni Thread. The devs are way too busy building the rom and sorting out bugs. The most common ones relate to Google Services battery drain. Camera issues and root.
Click to expand...
Click to collapse
I'll try to build a list of those, but I believe it wouldn't be serious to post it if not very precise and up-to-date. Think it's a great idea, but again, not having access to de development roadmap, is a big drawback, and I wouldn't want to go around pushing confusing info.
Problems with Root
After I flashed the 15Dec Build, suddenly I found I'm having problems with Root.
I'm flashing SuperSU 1.75 and RootChecker won't finish.
Xposed Framework won't install, etc.
I've trued the RW trick mentioned above but never get a response to 'su'.
Root worked fine prior to this build.
Any easy fix?
harrybarracuda said:
After I flashed the 15Dec Build, suddenly I found I'm having problems with Root.
I'm flashing SuperSU 1.75 and RootChecker won't finish.
Xposed Framework won't install, etc.
I've trued the RW trick mentioned above but never get a response to 'su'.
Root worked fine prior to this build.
Any easy fix?
Click to expand...
Click to collapse
You've got the wrong SuperSU version. See that the guide redirects you to Chainfire's SuperSU Xda thread, and there you'll find the latest recovery flash version is 1.86 and that's the one you want to grab. If not, download it from the Store, then update binaries by recovery, and there you are. For sure, if you want to try to do this procedure the dirty way, see if it works, if not, you should reinstall Omni with full wipes and use the new supersu version. Let me know if you got it solved or we will try to help you out with your problem.
Hi folks. Just up graded to the G4 from the G2. Had my G2 rooted and working like a dream. After finally understanding how to root my Sprint ZV6, I installed xposed installer and under the Framework section got the following message: "Xposed is not (yet) compatible with Android SDK version 22 or your processor architecture (arm64-v8a)."
As I am only familiar with Xposed for installing root apps, can anyone tell me if there is another alternative I can use until this compatibility issue is resolved? Thanks in advance
What version of Xposed are you trying to install, and what files and methods are you using? Please be very specific.
I'm facing the same problem. I have a Moto G 2013 with NX ROM (based on 6.0.1). I flashed xposed v79-sdk23-arm through TWRP
re. Framework "not (yet) compatible..."
Spott07 said:
What version of Xposed are you trying to install, and what files and methods are you using? Please be very specific.
Click to expand...
Click to collapse
As I mentioned before, I've rooted a G2 (2 different phones) in the past with no issues at all. I seem to be at a loss now, however.
This time, what I did after root was immediately install a version of Xposed Installer found here. Then, searching for Xposed Framework on Play (and not even thinking about coming here), I installed an app called Installer. It recognized Xposed Installer. When I open Xposed Installer I get the error mentioned in the 1st message.
I have since uninstalled both Installer and Xposed Installer & I did not get the version of Xposed. I do remember that it had a word like 'experimental' or something similar next to the number.
Not quite sure what you mean by 'methods' and no other files or APK's have been attempted until I get this figured out.
I'm kinda thinking either the Installer app was interfering with Xposed Installer, the Xposed Framework should be installed before it's Installer, or both. I also just spent a few minutes on a Framework thread trying to figure which one I need. Needless to say, I didn't come up with an answer.
Please let me know if some other info will help. Thanks
bertoncot said:
As I mentioned before, I've rooted a G2 (2 different phones) in the past with no issues at all. I seem to be at a loss now, however.
This time, what I did after root was immediately install a version of Xposed Installer found here. Then, searching for Xposed Framework on Play (and not even thinking about coming here), I installed an app called Installer. It recognized Xposed Installer. When I open Xposed Installer I get the error mentioned in the 1st message.
I have since uninstalled both Installer and Xposed Installer & I did not get the version of Xposed. I do remember that it had a word like 'experimental' or something similar next to the number.
Not quite sure what you mean by 'methods' and no other files or APK's have been attempted until I get this figured out.
I'm kinda thinking either the Installer app was interfering with Xposed Installer, the Xposed Framework should be installed before it's Installer, or both. I also just spent a few minutes on a Framework thread trying to figure which one I need. Needless to say, I didn't come up with an answer.
Please let me know if some other info will help. Thanks
Click to expand...
Click to collapse
You didn't tell me what version of Xposed you're trying to use. I needed a version number. That's why I asked you to be specific. That will make all the difference in the world.
Since you didn't answer my question, I'm going to make some assumptions. First, is that you're trying to install version 2.6 or 2.7. These are old versions that only work with KitKat (Android v 4.4, SDK 19) or older.
Second, I'm going to assume you're running Lollipop, specifically Android v 5.1 (SDK 22) based on your previous error message.
Third, I'm going to assume you haven't tried installing Xposed beta 3.0, or flashing framework zip files through a custom recovery or other flashing method.
Fourth, I'm going to assume that you haven't read the last several pages of the official Xposed announcement thread, or the first two posts of the "Xposed for Lollipop" discussion thread.
If all these assumptions are correct, then you need to go read those two threads I mentioned, and re-read them until you understand them. Then you should know everything you need in order to install Xposed correctly (and enough to make an informed decision whether you want to proceed), and how to recover if it doesn't work properly (because you can corrupt system files and get stuck in a bootloop if things don't work).
If you pay as much attention to those threads as you did to my question, you will be better off abandoning your desire to install Xposed.
I'm facing the same issue on CM11 ROM KK for Samsung galaxy ace 3 gt s7257r LTE.
Tried to install 2.7 e1 and few versions before this but none work...
Any suggestions?
kamikaze702k said:
I'm facing the same issue on CM11 ROM KK for Samsung galaxy ace 3 gt s7257r LTE.
Tried to install 2.7 e1 and few versions before this but none work...
Any suggestions?
Click to expand...
Click to collapse
Recent security updates for Android KitKat are responsible for the fact that Xposed is no longer working on KitKat devices. Check this thread for a solution.
Spott07 said:
You didn't tell me what version of Xposed you're trying to use. I needed a version number. That's why I asked you to be specific. That will make all the difference in the world.
Since you didn't answer my question, I'm going to make some assumptions. First, is that you're trying to install version 2.6 or 2.7. These are old versions that only work with KitKat (Android v 4.4, SDK 19) or older.
Second, I'm going to assume you're running Lollipop, specifically Android v 5.1 (SDK 22) based on your previous error message.
Third, I'm going to assume you haven't tried installing Xposed beta 3.0, or flashing framework zip files through a custom recovery or other flashing method.
Fourth, I'm going to assume that you haven't read the last several pages of the official Xposed announcement thread, or the first two posts of the "Xposed for Lollipop" discussion thread.
If all these assumptions are correct, then you need to go read those two threads I mentioned, and re-read them until you understand them. Then you should know everything you need in order to install Xposed correctly (and enough to make an informed decision whether you want to proceed), and how to recover if it doesn't work properly (because you can corrupt system files and get stuck in a bootloop if things don't work).
If you pay as much attention to those threads as you did to my question, you will be better off abandoning your desire to install Xposed.
Click to expand...
Click to collapse
Thanks.... I think.
Sprint LG G4 - LS991
Lollipop v 5.1 (SDK 22)
Sftwr version ZV6
Rooted & Xposed!
Hi all,
I have a problem. I'm using an OnePlus 5 and I can't use Xposed. I have just tried those 2 things. I have magisk updated to 14.0
1) I installed the version 09-09-2017 by dvdandroid, then I installed 26-07-17 v87 sdk25 by PurifyOs, all seems OK xposed tells that is installed and working, so I try to download some modules, activate them, reboot, but when I try to use them they tell me "please activate the module", I tryed clearing cache and dalvik, reinstalling so many times but nothing.
2) So I removed the PurifyOs one, and wanted to try to install the systemless one. I open Xposed, press install, it auto flashes from TWRP but there is a message error "dev/magisk/mirror/bin is not setup properly". So I try to download it as a module from magisk, try to install but gives the same error.
Can you help me? Thanks
Up...
Up...
Uppppppppp
Having the same issue on Oneplus 5 running android 7.1.1.
Any solutions?
Up....
same issue oneplus 3t stock
Uppppp
I couldn't activate any modules either, even though framework was green/good.
I re-installed my ROM and re-did the Xposed setup, ensuring I was using the CORRECT files.
Such as for Magisk Xposed vs. non-Magisk Xposed.
It's working now.
CZ Eddie said:
I couldn't activate any modules either, even though framework was green/good.
I re-installed my ROM and re-did the Xposed setup, ensuring I was using the CORRECT files.
Such as for Magisk Xposed vs. non-Magisk Xposed.
It's working now.
Click to expand...
Click to collapse
Thanks for your answer, I already did but nothing changed..
If ur on oos with encryption, you need to soft reboot the phone before the modules work.
8monochrome said:
If ur on oos with encryption, you need to soft reboot the phone before the modules work.
Click to expand...
Click to collapse
Already tried, nothing happened
I'm not sure how the OnePlus works in comparison to my Moto G4, but I had the same problem with 7.1.x. I couldn't get Xposed to work on any roms running Nougat. Went and installed an AOSP marshmallow rom and Xposed is working very well. My advice would be to downgrade to marshmallow. It's definitely worth the Xposed compatibility because even if you do get that aspect of it going, many modules don't support nougat yet. I was reluctant when I first heard this, but I' don't regret my decision at all. I'm running 12 modules right now with no issues at all and loving it. Hope this helps.
I have successfully installed Magisk on my device Root works but when I try to install a magisk module I get an error about not being able to mount magisk.img. When I try to install through recovery the module is flashes without any errors but once you open the app It displays "no modules installed". Before the G5s plus that I have a had the Moto G5 Plus. It had the same problem I just had to install another kernel over stock one and Magisk would work as expected. Is there a kernel for stock room that would support Magisk. Anyone else had this problem or is it just me?
ive no issue installing modules through magisk. Theres a lot of factors here. You didnt mention but id presume you installed magisk through recovery. Also, I presume you installed xposed. Maybe the modules your using require xposed to work. I forgot the exact steps to install xposed through magisk, but its not hard, and Id assume anyways you tried all of that. Have to flask xposed through recovery if I remember, then you can install xposed app apk too through recovery, then open magisk and install the latest xposed there. Im not using a stock rom, however Im fully confident if you properly rooted, and unlocked your phone of course, (I assume you did, just saying) its not a kernel issue. Sorry if I wasnt any help, its all i can think of right now.
When I got the phone I unlocked the bootloader and installed TWRP. When I set up my device I went back to recovery to install Magisk 14.3. It installed correctly and I got root using Magisk but when I try to install any module through the Magisk app I get an error. If I got you right should I try to install Xposed too? I was planning to install Xposed, Magisk version. But when I try that I get an error. I have attached a screenshot of when I try to install Xposed by topjohnwu and Greenify for Magisk. I get the same error.
well, xposed may not be your issue if you cant install any module with magisk manager. The modules, majority of them, if not all of them, i dont know, do not require xposed. Some do, most do not. Now please keep in mind, i could be wrong. I would say this, no harm in installing xposed, its basically a must get anyways for many awesome apps/modules. How you install, first install the xposed manager, youll have to look around for it, its not on the play store. Then downkoad magisk xposed through magisk. Once you download that zip file boot into twrp and install xposed through twrp.
This is a youtube on it: https://www.youtube.com/watch?v=MCcvsOp83A4 Now thing is, this may not fix any of your problems. But theres a chance it may. Like i said either way you want xposed on rooted phones anyways.
Patched kernel for stock. I have no problem running modules on Magisk. Flash in recovery.
https://forum.xda-developers.com/showthread.php?p=73930507
Sent by way of magic
if youre using stock rom, try this kernel. i just compiled it today from geneticengineers git. last updated hours ago.
Ae3NerdGod said:
if youre using stock rom, try this kernel. i just compiled it today from geneticengineers git. last updated hours ago.
Click to expand...
Click to collapse
UPDATE, just found out wifi doesnt work, sorry, been traveling and didnt think to test. everything else seems to work tho.
heres an older version of the kernel not compiled by me until i figure this out
Ae3NerdGod said:
UPDATE, just found out wifi doesnt work, sorry, been traveling and didnt think to test. everything else seems to work tho.
heres an older version of the kernel not compiled by me until i figure this out
Click to expand...
Click to collapse
Is there a thread for these kernels or any for G5S Plus?
THERAJ12 said:
Is there a thread for these kernels or any for G5S Plus?
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g5s-plus/development/kernel-t3707143/post74562730#post74562730
wifi fixed btw
I'm trying to flash Xposed on my device (its an mtk6735 device, using a custom rom ported from the meizu m2, android 6.0), I've tried installing xposed but whenever i try to do so, xposed installer says that xposed is installed but not active, I've tried researching about the issue and tried the common fixes suggested on XDA and other forums, to no avail. One clue that I do have is that my device is an arm64 device but when i try flashing the arm64 zip, it says that my device is arm hence i should use that zip, I'm sure mine is an arm64 device cause I've researched and used apps to confirm it, so to flash xposed i used the arm zip but that causes the issue "xposed is installed but not active", my theory is that since it thinks its the wrong processor it doesnt work properly on my device, any help would we appreciated greatly, thanks.
Have a look here http://forum.xda-developers.com/xposed/xposed-framework-89-0-systemless-t3723850
Tried all of that, doesnt seem to work...
simply the most awesome said:
Tried all of that, doesnt seem to work...
Click to expand...
Click to collapse
Might try to change the custom rom If available or go back to stock to flash xposed.
That's gonna be alot of work just to get Xposed working
Try soft rebooting from Xposed Installer app if it reports Xposed Framework is inactive.
simply the most awesome said:
Tried all of that, doesnt seem to work...
Click to expand...
Click to collapse