hay all ..thanks before ...
i have problem with my redmi 4a can't charging .. change board charger and flexible don't solve anything . .. my redmi 4a bootloop need for flashing from test point..
please share point to jumper way charging board to main board .. i don't have tester for it and really really need help image jumpper point - +
you can jumper emmc to ufi box for flash new rom. it more easy, from you must to find a jumper ways for your board charger
Related
Hi all,
I have a bricked Mate 10 pro (yeah boohoo), but I think it might be fixed using testpoint method and DC phoenix. However I'm unfamiliar with how the testpoint proedure works and some guidance is much appreciated. I have opened my device, found the tespoint and soldered some wire to it so I can ground it easily. But... I don't know what to expect and what should (or shouldn't) happen.
Can someone please explain:
- first, do I need special drivers?
- at what point should I ground the testpoint:
- with or without batery connected?
- with or without USB cable connected?
- while powered off, while in fastboot mode or while in erecovery? Any other mode is not working on my device, so no system, just fastboot or erecovery
- should I just ground it briefly and then release or keep grounded during the whole process?
So far I haven't had any luck getting DC Phoenix to recognise the device as in forced upgrade mode. Any help is much appreciated, as the DC unlocker crew haven't offered any help at all...
Rgds,
David
I want to unbrick mi9 wiht testpoint to edl mode.
Where i can find for mi 9 testpoint?
Testpoint Mi 9 by PiLyTam is not working.
khlaikran said:
I want to unbrick mi9 wiht testpoint to edl mode.
Where i can find for mi 9 testpoint?
Testpoint Mi 9 by PiLyTam is not working.
Click to expand...
Click to collapse
You don't need that.
I unbricked mine with the Mitool Pro from bootloader locked and "system has been destroyed"
PRolo said:
You don't need that.
I unbricked mine with the Mitool Pro from bootloader locked and "system has been destroyed"
Click to expand...
Click to collapse
If you know such a method, please open a topic and create a guideline, will be beneficial for more users in such situation!
I'll try to make it tonight.
Sent from my MI 9 using XDA Labs
PRolo said:
You don't need that.
I unbricked mine with the Mitool Pro from bootloader locked and "system has been destroyed"
Click to expand...
Click to collapse
What did you do it?
khlaikran said:
What did you do it?
Click to expand...
Click to collapse
I've published the tread that i've promissed to you.
Sent from my MI 9 using XDA Labs
If you know about the testpoint pin or edl mode, i guess you are in big trouble and doing a lot of research about it now or even talked to those guys who can remote in to your pc and unbrick your device using TeamViewer
My advice is dont waste your time, just find a way to send it back to China to get it fix.
Nobody have any clues about this testpoint pin and PiLyTam is BS, testpoint pin on all other Xiaomi model will be close together, HTF that this model can be so far away that you cant even use tweezer to short it?
BTW, if your phone is in below condition, not just one but all combined. Trust me, dont waste your time
- your phone is in bootloop and your phone have no OS installed because you have already delete it with TWRP
- bootloader is locked
- you have using that sh1tty xiaomi flashtool and haven't noticed that "flash and lock" was selected by default
Oh and by the way, welcome to the sh1tty group of being xiaomi's customers, dont get me wrong the phone is great but if you are not in China and using "grey products" you are on your own
tawa2525 said:
If you know about the testpoint pin or edl mode, i guess you are in big trouble and doing a lot of research about it now or even talked to those guys who can remote in to your pc and unbrick your device using TeamViewer
My advice is dont waste your time, just find a way to send it back to China to get it fix.
Nobody have any clues about this testpoint pin and PiLyTam is BS, testpoint pin on all other Xiaomi model will be close together, HTF that this model can be so far away that you cant even use tweezer to short it?
BTW, if your phone is in below condition, not just one but all combined. Trust me, dont waste your time
- your phone is in bootloop and your phone have no OS installed because you have already delete it with TWRP
- bootloader is locked
- you have using that sh1tty xiaomi flashtool and haven't noticed that "flash and lock" was selected by default
Oh and by the way, welcome to the sh1tty group of being xiaomi's customers, dont get me wrong the phone is great but if you are not in China and using "grey products" you are on your own
Click to expand...
Click to collapse
Hey boy!
I think i can help you without send mi 9 back to china. But i want you have one acc xiaomi authorized.
Ib for me now.
Possibly Wrong Pins
I believe the pins are the wrong pins. I've been trying different methods of entering EDL mode on my own bricked Mi 9 (locked bootloader + the system is destroyed) and cannot enter EDL mode no matter what I try. Has anyone been successful?
PRolo said:
I've published the tread that i've promissed to you.
Sent from my MI 9 using XDA Labs
Click to expand...
Click to collapse
I'm not bricked, but can you provide a link to your guide - may help others find it!
cheers
EDIT: his thread is here
mode1 said:
I believe the pins are the wrong pins. I've been trying different methods of entering EDL mode on my own bricked Mi 9 (locked bootloader + the system is destroyed) and cannot enter EDL mode no matter what I try. Has anyone been successful?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=943335&st=1380#entry84949424
Have a look here for test point. You will need to read it properly saying something about serious problems later. Not sure if he is talking about the battery or the cable that hides the pins to be disconnected.
Clarkie_955i said:
http://4pda.ru/forum/index.php?showtopic=943335&st=1380#entry84949424
Have a look here for test point. You will need to read it properly saying something about serious problems later. Not sure if he is talking about the battery or the cable that hides the pins to be disconnected.
Click to expand...
Click to collapse
**Continue at your own risk**
You'll have to detach battery cable first before attempting to circuit the 2 testpoints as shown on the picture. Don't forget !
In order to reach the 2 points you'll have to disconnect the ribbon cable as shown in the video. Then connect the 2 points (with a clip or anything that can connect both) and reconnect the ribbon cable again (keep holding the 2 points).
That would be it
MI9-testpoint vid
thnx hell3x / 4pda
raystef66 said:
**Continue at your own risk**
You'll have to detach battery cable first before attempting to circuit the 2 testpoints as shown on the picture. Don't forget !
In order to reach the 2 points you'll have to disconnect the ribbon cable as shown in the video. Then connect the 2 points (with a clip or anything that can connect both) and reconnect the ribbon cable again (keep holding the 2 points).
That would be it
MI9-testpoint vid
thnx hell3x / 4pda
Click to expand...
Click to collapse
Thanks for the info and the video. Couldn't get the video to work not a member on 4pda
Clarkie_955i said:
Thanks for the info and the video. Couldn't get the video to work not a member on 4pda
Click to expand...
Click to collapse
The video is now on youtube watch?v=IaibckV1E2s (I can't post links yet). I've tried to do this but still couldn't get it to work though. Does anyone have any suggestions?
hello
i have same problem like you..no soultion a this moment. i wait like you some help
is there anyone have the Mi9 EDL auth account ? i really need that badly. so i can flash the correct rom.....
@b0ltun
Contact with him via telegram app
Hello everyone,
I am just new member and this is my first post to ask although I have been read many posts from XDA in the past years.
Is it possible to unlock bootloader without PC? Because my phone USB port is no longer working except to charge. I can't find the answer in Google.
Thanks in advance.
Thike Soe
Mi 6X
Miui 10.3.3 China stable rom.
Thike said:
Hello everyone,
I am just new member and this is my first post to ask although I have been read many posts from XDA in the past years.
Is it possible to unlock bootloader without PC? Because my phone USB port is no longer working except to charge. I can't find the answer in Google.
Thanks in advance.
Thike Soe
Mi 6X
Miui 10.3.3 China stable rom.
Click to expand...
Click to collapse
You can replace the USB dock board very easily:
Repair for Xiaomi Mi A2 USB Charging dock port Connector Flex Cable for Xiaomi Mi 6X USB Charging Dock PCB Board Flex Cable
https://www.aliexpress.com/item/Rep...&terminal_id=64b0e1084a954beb8f53d69109ee9600
Double check the model and supplier before put an order.
Noted with many thanks.
Thike said:
Hello everyone,
I am just new member and this is my first post to ask although I have been read many posts from XDA in the past years.
Is it possible to unlock bootloader without PC? Because my phone USB port is no longer working except to charge. I can't find the answer in Google.
Thanks in advance.
Thike Soe
Mi 6X
Miui 10.3.3 China stable rom.
Click to expand...
Click to collapse
Hello Thike The New Member,
Need Some Help?
We Here To Help Help You,Your USB Port Is No Longer Working?
Just Buy a New Xiaomi Mi 6X Or Xiaomi Mi A2 On Wish Or Amazon!
And Then Here Is The Requirements
[REQUIREMENTS] 1:USB Port Must Be Working
2:OTG Cable
3:Need 2 Phones (Like Mi A2 And Mi 6X)
4:Make a Full Backup
[/REQUIREMENTS]These Are Without PC And Easily Unlock Your Bootloader!
First Step
Use Your Mi 6X Or Mi A2 To Unlock It,Download Bugjaegar App On Play Store On Mi 6X Or Mi A2 (Download Bugjaegar On 1 Phone Only,Not 2 Phones To Download It)
And Then Go To Settings>About Phone>Build Number Tap 7 Times>System>Advanced>Developer Options (Mi A2)>Turn On OEM Unlocking On Your Phone You Need To Unlock It>Turn On USB Dubugging On Mi A2 And Mi 6X
Now... And Then Use Your Bugjaegar App On Your Phone(If You Have Downloaded On Your 1 phone,Not 2 phone To Download)
Then You Have To Plug Your OTG Cable To Your 2 Xiaomi Phones!
On Your Bugjaegar App...it Will Ask You To Allow The Access Then Click Ok On Bugjaegar App,Then You Have To Click Ok Again,Click Ok On The Phone You Need To Unlock It If It Asked Allow USB Debugging!
Now... Please Click Reboot Bootloader On Bugjaegar App Then You Have To Click The Blue Circle Icon,Click I Understand And Then You Have To Type These Things
1:fastboot devices
2:fastboot oem unlock
_______________________
And Then You Have To Tap The Volume Down(-) Button On Your Phone You Need to Unlock It Then Tap Power Off Button!
Now Your Phone Was Unlocked And Unplug The OTG Cable!
After Unlocked... Your Data Will Wipe And If You Reboot Your Phone...
Your Reboot Will Always Show The Bootloader Unlocked Warning!
Need a TWRP Recovery To Remove It!
If You Want To Flash TWRP And Remove The Unlocked Warning...
We Will Reply You On Your Created XDA Forum!
Please Like Our Reply!
Hello there!
Redmi Note 9 (Merlin)
After some operations to install TWRP, i somehow accidentaly "bricked" it. Decided to flash it via SPFlashTools with auth bypass. But unfortunately due to power leakage my PC switched off during flashing. Now i see that my phone can`t be recognised. In Device Manager i see "Unknown Device (Device Descriptor Request Failed)" and phone doesnt even react on any button pressing. I even dont know if it working or not.
Sorry for my broken English, i am from Ukraine -(
Thanks a lot for your further assistance to fix my problem with phone
It looks like it's a harder brick. Send it back where you bought it from if they're authorized to repair your device. MediaTek chipset devices are easy to brick and harder to recover.
I tried rn 10 rom on 11 4g and failed. cannot go to fastboot, display shows nothing.
phone instantly connects and disconnects when connected with pc. I can't figure out how to solve this problem
b990317 said:
I tried rn 10 rom on 11 4g and failed. cannot go to fastboot, display shows nothing.
phone instantly connects and disconnects when connected with pc. I can't figure out how to solve this problem
Click to expand...
Click to collapse
Why you don't open a thread in the RN11-XDA section? You will find better assistance from the community, Also explain better your issue. I'll also, do my best.
SubwayChamp said:
Why you don't open a thread in the RN11-XDA section? You will find better assistance from the community, Also explain better your issue. I'll also, do my best.
Click to expand...
Click to collapse
the problem is my model's for china and uses different ap(helio g88) XD. but thanks I'll try
I tried rn 10 rom on 11 4g(I couldn't find any rom for selenes) and failed. cannot go to fastboot, display shows nothing.
phone instantly connects and disconnects when connected with pc. I can't figure out how to solve this problem. Does anyone have similar symptom like this?
b990317 said:
the problem is my model's for china and uses different ap(helio g88) XD. but thanks I'll try
Click to expand...
Click to collapse
Do you see? Your post lacks of better description, as can solve the issue, probably you need to flash again the ROM using Mi Flash tool (if allowed) or SPFT.
I had exactly the same problem years ago with my old phone. It's called hard brick. I had to take the phone apart, then connect 2 contacts on the motherboard with a copper cable. While holding it in place I connected the micro usb/usb cable to the computer and it appeared in special repair mode. I then loaded proper files via special repair software. And it worked.
The point is you have to reflash the fastboot, which is little more challenging. I suppose you can look up guides for other xiaomi phones, just make sure they use similar chipset. Also you'd need special Mediatek drivers.
You then have to enter this supposed repair mode in which you can overwrite the fastboot.
b990317 said:
I tried rn 10 rom on 11 4g(I couldn't find any rom for selenes) and failed. cannot go to fastboot, display shows nothing.
phone instantly connects and disconnects when connected with pc. I can't figure out how to solve this problem. Does anyone have similar symptom like this?
Click to expand...
Click to collapse
First you should be sure about your chipset (should be Mediatek Helio G88):
Xiaomi Redmi Note 11 4G - Full phone specifications
www.gsmarena.com
Then you should download the stock ROM for your smartphone.
Finally, there is a How-To Unbrick video for Redmi 10 selene (almost same specs: https://www.gsmarena.com/xiaomi_redmi_10-11060.php) here:
Hope this helps...
MarvavCZE said:
I had exactly the same problem years ago with my old phone. It's called hard brick. I had to take the phone apart, then connect 2 contacts on the motherboard with a copper cable. While holding it in place I connected the micro usb/usb cable to the computer and it appeared in special repair mode. I then loaded proper files via special repair software. And it worked.
The point is you have to reflash the fastboot, which is little more challenging. I suppose you can look up guides for other xiaomi phones, just make sure they use similar chipset. Also you'd need special Mediatek drivers.
You then have to enter this supposed repair mode in which you can overwrite the fastboot.
Click to expand...
Click to collapse
thanks I'll try it
Oifan said:
First you should be sure about your chipset (should be Mediatek Helio G88):
Xiaomi Redmi Note 11 4G - Full phone specifications
www.gsmarena.com
Then you should download the stock ROM for your smartphone.
Finally, there is a How-To Unbrick video for Redmi 10 selene (almost same specs: https://www.gsmarena.com/xiaomi_redmi_10-11060.php) here:
Hope this helps...
Click to expand...
Click to collapse
Thanks for youtube link. It'd be helpful
why you flash redmi 10 rom ???
I missunderstood. I thought it would work
Oifan said:
First you should be sure about your chipset (should be Mediatek Helio G88):
Xiaomi Redmi Note 11 4G - Full phone specifications
www.gsmarena.com
Then you should download the stock ROM for your smartphone.
Finally, there is a How-To Unbrick video for Redmi 10 selene (almost same specs: https://www.gsmarena.com/xiaomi_redmi_10-11060.php) here:
Hope this helps...
Click to expand...
Click to collapse
Is there next procedure? I followed this video and i'm stuck in fastboot loop and phone is locked. i can't try miflash or miflash unlock because phone is locked with reset