Hi!
!! This is quite serious! I need to get my data (pictures, videos) out of my phone, which is possibly soft-bricked.
I did the following in hope of more usage opportunities with my new phone:
[Unlocked bootloader + Rooted it]
1. installed TWRP following this guide https://forum.xda-developers.com/p10/development/testers-twrp-t3585256;
2. rooted following this guide https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946;
3. installed few apps like greenify, wi-fi hacking apps etc, and everything was good.
BUT then 1 app (don't remember which) requested that it needs SuperSU and not the one root permission app that I had. So it asked whether I want to install it. I thought - yes, why not. Then it said that before it can install SuperSU it needs to uninstall previous permission app - I clicked OK. Then it kind of started, but then failed the installation. Ok, I kind of closed it and there were no problems. But after next restart of the phone it was stuck on boot process..
I dont really care about the phone, but data on it is so important. I tried sme fast hend methrods to boot it, like wiping catch, dalvik catch, but it did not work out.
Next I looked for possobilities to rescue data, but I didn't succeed.
Easiest mentioned option - to enter twrp and connect via usb seemed promising, BUT data are shown encrypted.
Please see the picture - I tried to be as precise as I could, so that you can understand the situation.
! I can beckup all data to micro sd card, but would it decrypt after new install of stock rom (e.g. from eRecovery that Huawei provides) and allow access or not?
Please help me. I am willing to have 1-on-1 skype chat and give some donations for this as it is so important.
To mention: Rescue apps like EaseUS seems to be useless, because they state to recover data from bricked device, but then after installing soft it askes to allow usb-debbuging, but c'mon, it's not booting up.. .
So,
1. Is there a chance to recover data?
2. Is it a good sign that 16GB of data are showing even if files are shown encrypted?
3. data are also showing on pc, when connected on twrp, but also encrypted.
Any help will be appreciated!
Additionally quite important question: at this state (possible soft brick + encrypted files), is there a chance that if I make a backup to MicroSd card of all the data and then take it our to reinstall rooted stock version of my android that later puting backup in will show my files that were backuped? Could ir be so that phone luckiliy decrypt them itself because it is the same phone? Hope this is clear what I mean.
OK, hopefully all is not lost.
First things first, be REALLY careful. If you start applying factory images, wiping things and generally messing about, if you don't know what you're doing you're putting your data in a lot of danger - Huawei devices do things in weird ways, so be super sure you know the consequences of what you're doing.
Now that's out of the way... it sounds like you haven't done anything to wipe the data. Also, you've already previously unlocked the bootloader which should put you in a good situation. You need to discount TWRP as a potential solution - there is no working decryption for TWRP yet on the Kirin 960 devices and from conversations I've had, it doesn't sound like that is imminent.
What it sounds like has happened is that messing about with root has messed up something on your system partition. Which should be fixable!
As a first step, this is what I'd do.
- Check which version your phone is on if you don't know already (you should be able to find this in ' /version/special_cust/VTR-L09/hw/eu/prop/local.prop')
- Find a full dload zip for the appropriate version (use FirmwareFinder if needed)
- Download the zip an extract the dload app
- Use splitupdate to split the images out of the dload
- Boot the device to bootloader ('adb reboot bootloader' or power on with cable connected and volume down pressed) then do 'fastboot flash system SYSTEM.img'
- Flash BOOT.img too
- Try booting
Hopefully this will fix it, but at the very least it'll get your system partition back to a stock state.
Let me know how it goes. Good luck!
P
How to go from OOS 5.0 to Stock Nouga
Since you've made the spelling error twice, its Nougat, not "Nouga.".
I think the best way you could do it is flash the special Open Beta build on the Open Beta thread and then flash the stable build zip.
Whichever way you do the reversion, you will lose partial data, as N and O do not support each others app installations.
Z.boy said:
How to go from OOS 5.0 to Stock Nougat
Click to expand...
Click to collapse
If you are unlocked bootloader, flash twrp 3.1.1-2 and clear dalvik data cache and system, and just flash them through twrp
dont use twrp 3.2.0-0 because you cant install magisk, it shows installed but magisk doesnt seem to be recognized in apps
I've just done that, and everything seems working flawlessly
Pls do hit thanks if i help you
izukamikain said:
If you are unlocked bootloader, flash twrp 3.1.1-2 and clear dalvik data cache and system, and just flash them through twrp
dont use twrp 3.2.0-0 because you cant install magisk, it shows installed but magisk doesnt seem to be recognized in apps
I've just done that, and everything seems working flawlessly
Pls do hit thanks if i help you
Click to expand...
Click to collapse
Does your solution avoid erasing internal storage? Because that's the part that's preventing me as it can take too long getting my backups into the phone again.
rebelpixel said:
Does your solution avoid erasing internal storage? Because that's the part that's preventing me as it can take too long getting my backups into the phone again.
Click to expand...
Click to collapse
i never format my internal sdcard partition
it's taking too long time to backup and restore it again
as i said, only format dalvik cache data and system thru twrp and you're good to go
download special edition nougat revert zip file and flash it via recovery
http://oneplusroms.s3.amazonaws.com...337224&Signature=BEA4IHd/rVFqoPd2gh7EvwaoSeg=
notes :
The build will wipe app and cache data, but Internal Storage will be saved (ie: pictures and files)
Users who revert their device back to the special build can still OTA update the device to Android O build at a later date.
Steps to revert:
Download special build
Copy to Internal storage
Reboot to recovery Mode to install
Choose “Install from Local”
Choose the downloaded build to install
I am trying to install TWRP and root my Mi Mix. I have followed the steps below without encountering any error messages.
1. Go into fastboot
2. Flash TWRP recovery
3. Boot into recovery.
But at the end when I boot into recovery I see Mi Recovery 3.0 instead of TWRP. Am I missing anything? My device is unlocked. I am currently running MiUI 9.6.1 Global stable Android 8.0
sofene said:
I am trying to install TWRPA on my Mi Mix. I have followed the steps below without encountering any error messages.
1. Go into fastboot
2. Flash TWRP recovery
3. Boot into recovery.
But at the end when I boot into recovery I see Mi Recovery 3.0 instead of TWRP. Am I missing anything? My device is unlocked. I am currently running MiUI 9.6.1 Global stable Android 8.0
Click to expand...
Click to collapse
Never mind I solved the problem by booting from the pc. But I have a new problem. Two problems really. First of all I can't seem to get the data partition backed up. I get the error unable to mount *\data *. Secondly I cannot install magisk.zip. I cannot find the file in twrp though it is in main storage in the device. Do I need to copy it to any specific location for the twrp to use it?
Same like your firs post. But i not try instal magisk. I using SU. Now not root and not cusum recovery
sofene said:
Never mind I solved the problem by booting from the pc. But I have a new problem. Two problems really. First of all I can't seem to get the data partition backed up. I get the error unable to mount *\data *. Secondly I cannot install magisk.zip. I cannot find the file in twrp though it is in main storage in the device. Do I need to copy it to any specific location for the twrp to use it?
Click to expand...
Click to collapse
You can install it using a usb stick or via sideload.
You cant backup because the twrp's dont let you enter the password for the encryption on the device thus leaving it encrypted.
If u dont want to delete everything then use sideload for the Magisk installer, if u dont mind then u can go ahead and format data and the encryption will be gone untill you go back to system, then the device will encrypt the data again.
sexlord89 said:
You can install it using a usb stick or via sideload.
You cant backup because the twrp's dont let you enter the password for the encryption on the device thus leaving it encrypted.
If u dont want to delete everything then use sideload for the Magisk installer, if u dont mind then u can go ahead and format data and the encryption will be gone untill you go back to system, then the device will encrypt the data again.
Click to expand...
Click to collapse
I tried to install magisk using sideload enabled but still got error unable to mount storage at the end so I deleted data. And then I was able to install magisk without error. However, when I check root status with root checker it says root was not properly installed. When I went back to twrp I was presented with a screen to enter password to mount I guess the storage or partition. Does this mean that ruth has been installed even though root checker says its not.? Secondly which password is being requested because when I entered my screen unlock password it says password failed. Is it asking for the mi account password or with other password? Thanks for your assistance.
Hi, the only thing that worked for me is to install right after the rom the encryption disabler and you'll be able to use trwp. Just follow the steps in the link below. last thing, when you'll make an update you'll loose again the trwp access.
https://forum.xda-developers.com/mi-mix/development/rom-global-miui9-oreo-mi-mix-t3783869
lnt976 said:
Hi, the only thing that worked for me is to install right after the rom the encryption disabler and you'll be able to use trwp. Just follow the steps in the link below. last thing, when you'll make an update you'll loose again the trwp access.
https://forum.xda-developers.com/mi-mix/development/rom-global-miui9-oreo-mi-mix-t3783869
Click to expand...
Click to collapse
Thanks for your reply. One question, though. Would this then allow you to backup data using twrp?
sofene said:
Thanks for your reply. One question, though. Would this then allow you to backup data using twrp?
Click to expand...
Click to collapse
Yes you can make a backup, but in case of update you'll loose the access on your files in trwp.
A couple things :
1. You can't install magisk if your data partition is encrypted, because magisk needs to put the file in the data partition. so you need to disable the encrypt first, and then you can install magisk.
2. If your data partition is encrypted, don't bother to backup from twrp. Boot to system, connect to pc, and backup using regular way (copy and paste files).
3. Backup your data before you do any encrypt/decrypt process.
After trying to update to a newer version of a custom rom, crDroid 6.4, I can no longer boot into the system. The phone only boots into recovery. TWRP no longer asks for a password in order to decrypt the phone, as it has done before. I have tried wiping Data, Cache, and Dalvik, and flashed the rom again, with no luck. Is it a way for me to force decrytion or something?
Any help is much appreciated! I am new to this, and still learning.
Ukulelen said:
After trying to update to a newer version of a custom rom, crDroid 6.4, I can no longer boot into the system. The phone only boots into recovery. TWRP no longer asks for a password in order to decrypt the phone, as it has done before. I have tried wiping Data, Cache, and Dalvik, and flashed the rom again, with no luck. Is it a way for me to force decrytion or something?
Any help is much appreciated! I am new to this, and still learning.
Click to expand...
Click to collapse
I assume that the data partition is actually still encrypted and you see random folder names in TWRP. If so, try formatting data in TWRP (not wipe, but format) then reboot to the ROM.
Robbo.5000 said:
I assume that the data partition is actually still encrypted and you see random folder names in TWRP. If so, try formatting data in TWRP (not wipe, but format) then reboot to the ROM.
Click to expand...
Click to collapse
Will this delete all my files?
Also, I'm not sure if I am flashing the ROM correctly. I have the ROM, magisk and other files on my computer. I use "ADB Sideload" under advanced in TWRP and "adb sideload romname.zip" on my computer.
Ukulelen said:
Will this delete all my files?
Also, I'm not sure if I am flashing the ROM correctly. I have the ROM, magisk and other files on my computer. I use "ADB Sideload" under advanced in TWRP and "adb sideload romname.zip" on my computer.
Click to expand...
Click to collapse
Yes it will delete all your files. If you boot to TWRP and it doesn't ask for the PIN, etc., but you see all your folders have random encrypted names, then everything is lost anyway. There is nothing you can do to recover that data.
In future just copy the ROMs onto the phone and flash them directly off the phone in TWRP, using the install menu.
Robbo.5000 said:
Yes it will delete all your files. If you boot to TWRP and it doesn't ask for the PIN, etc., but you see all your folders have random encrypted names, then everything is lost anyway. There is nothing you can do to recover that data.
In future just copy the ROMs onto the phone and flash them directly off the phone in TWRP, using the install menu.
Click to expand...
Click to collapse
Thanks for your help. Luckily I had backed up all my photos. I am up and running with a new rom. I am testing omni rom as it now comes with microg prebuild.
This is a bit late but why not. THIS IS A COMPILATION OF ALL THE OS METHODS YOU NEED FOR THE OP6/6T.
ENJOY my guide
DISCLAIMER:
*I am not responsible for bricked devices, damage to your device*
Sorry for a long list of methods, some work for others and some don't. But I recommend to pick a method and stick to it. Maybe read the part at the top as some have notes about mine or someone else's experience/recommendation. Don't skip steps and follow each step.
If stuck, just ask and I or anyone else will try and help
I am here to post methods for anyone who is interested/need help. I have tested these myself and helped others who may be struggling
Download
The guide has loads of files/ zips/ tools to use/flash/install. But no worries as everything can be downloaded and there are links AT THE BOTTOM OF THIS THREAD (NOT COMMENTS) to where to download:
SDK Platform Tools (Fastboot tools) from Developer Android
TWRP from mauronofrio
Magisk from topjohnwu
Gapps (Google Apps) from NikGapps. I recommend omni for ROMs that don't include Gapps.
Fastboot ROM for OP6 + OP6T from mauronofrio
MSMDownload tools for OP6 + OP6T from Some_Random_Username
IMPORTANT NOTES!
YOU REQUIRE Platform Tools (Fastboot Tools) IN ORDER TO USE THE METHODS IN THIS GUIDE AS TWRP NEEDS TO BE INSTALLED!
YOU NEED TO HAVE A UNLOCKED BOOTLOADER AS WELL!
For GAPPS, u can use the same or a updated version of the package. But has to be the same type u used to install it like (stock, full, Omni, basic, etc). ONLY FLASH/INSTALL IF the RESTORE SCRIPT DIDN'T SHOW UP during a DIRTY FLASH/UPDATE AND ONLY FLASH AFTER REBOOTING TO RECOVERY AFTER FLASHING/INSTALLING A OS/BUILD ZIP FILE!
How to get Platform Tools
These tools are used to install TWRP, to unlock the bootloader of your device and is needed to use the METHODS in this guide.
Download the platform tools.zip of your software platform (Mac, Windows, Linux)
Extract the platform-tools.zip
To use it go into your platform-tools folder
Press shift + right-click and choose command prompt or PowerShell
Connect your device when it's in fastboot mode and done
How to install TWRP
Sadly this Guide is for Windows, but other platforms like Mac or Linux can be found online.
YOU CAN USE THIS METHOD TO INSTALL A NEWER VERSION OF TWRP TOO
You need to have downloaded Platform Tools which the link is attached below.
Transfer the TWRP.img file into the platform-tools folder
Now transfer TWRP.zip into your device's internal storage. (connect -> allow file transfer -> drag and drop files)
If you want root download and transfer magisk.apk and the link is supplied below. Also, RENAME from .apk to .zip
Now we must boot into fastboot mode. (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Now connect your device to a Windows device
Press shift + right-click. Choose command prompt or PowerShell
Enter "fastboot devices" and your device should be displayed if it's connected
Type "fastboot boot twrp" file name (do twrp + press tab) and press enter
Then you should be booted into TWRP
Enter the password and swipe to allow modifications
Press install and find your TWRP.zip file
Swipe to confirm Flash
If you want root do this
Press the back arrow and find your magisk.zip
Swipe to confirm Flash
Reboot to the system and done
Otherwise, just reboot to system. Up to u
Installing a Custom ROM
Install Custom ROM on OP6T from OOS
Make sure u have BACKED UP your device and have the latest OOS installed in both slots. If u do, go to Method 3.
If u have finalize.zip, go to Method 2.
Method 1
If u don't have OOS installed in both slots or finalize.zip, use this method.
Transfer OOS.zip file, TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot TWRP
Flash OOS + TWRP
reboot recovery
Flash OOS + TWRP
Reboot recovery
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 2
If u have finalize.zip, do this method. Using finalize is way quicker as there's less flashing and rebooting.
Transfer OOS.zip file, finalize.zip, TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot to TWRP
Flash OOS + finalize
Boot to Bootloader
Boot to TWRP
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 3
Once you have installed OOS in both slots do this part.
Transfer TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot to TWRP
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Installing Custom Rom not from OOS
You can use finalize method or just flash OOS + TWRP way. The finalize way is there for some who like less flashing and rebooting.
Using the methods in Install Custom ROM on OP6T from OOS
Using the old way, use Method 1
Using finalize.zip, use Method 2
Remember to factory reset (wipe, but no need to wipe internal storage)
Backing Up OOS and Custom ROM
Make sure u have installed the latest TWRP version from mauronofrio
You should use TitaniumBackup or Migrate to back up your apps and contacts.
Also, have a copy of your Internal Storage folders if u have important files.
TWRP Backup backs up your OS like Apps, settings and set up, but not internal storage.
NEVER BACKUP SYSTEM AND VENDOR! ONLY SYSTEM.IMG or VENDOR.IMG IF YOU HAVE TO!
Restoring it makes going back way easier like you have never left
Or you can go manually and try and restore everything, but why do that when you got TWRP?
I do both ways of backing up
Backing up OOS
Boot TWRP recovery
Choose Backup
Choose boot, data. YOU DO NOT NEED TO BACKUP System.img and Vendor.img!
Swipe to backup
Once done, either boot to system or mount
Transfer the whole TWRP folder onto a storage device
Done
Backing up a Custom ROM
Boot TWRP recovery
Choose Backup
Choose boot, data, system.img, vendor.img
Swipe to backup
Once done, either boot to system or mount
Transfer the whole TWRP folder onto a storage device
Done
Restoring OOS and Custom ROM
Restoring OOS TWRP Backup
To restore OOS use either fastboot ROM or MSM. Fastboot is the fastest and easiest way if u have a TWRP backup which there's a method to how to make one in this guide. BUT if you are restoring to go back to stock OOS then use MSM
I use Fastboot ROM restore for that too as we are restoring our data anyways and also for switching/installing a custom ROM. Much easier in my experience.
DOWNLOAD FULL ZIP OF OOS version of your TWRP backup otherwise you could risk doing the whole restore method again OR setup from SCRATCH! IF you aren't restoring a TWRP backup, I recommend either TRANSFER or DOWNLOAD via WiFi or oxygen updater, a UPDATED version of OOS AFTER doing either fastboot ROM or MSM restore methods. As they restore a old version of OOS!
Restoring using Fastboot ROM
Download fastboot ROM of your choice using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Restoring using MSM Download Tool
Download latest MSM version of your choice using the link in the Download Link section.
Extract/ un-zip
Click on MSM tool .exe file
Turn off device
HOLD BOTH volume buttons
Connect your phone
Wait for your device to be connected and it should show as green
Click verify to check and press start
Wait till phone reboots
The setup device and u can carrying on restoring your device if u don't want a unlock bootloader or return to what your device was like before.
Go into developer options
Allow OEM unlocking
Reboot to bootloader
Enter "fastboot devices" to check your device is connected
Enter "fastboot oem unlock"
Swipe for yes
Then it will reboot again
continue to the next method
For both fastboot and MSM
Once booted into system, set it up and update to OOS version of your TWRP backup.
Download the full zip using the link in the Download Link section.
Transfer the OOS .zip to internal storage.
Go into settings -> system update -> Update via local upgrade -> find zip file and press install
Do this twice to make sure you have installed that version of OOS in both slots
Boot to bootloader
Boot TWRP
Install TWRP
Reboot recovery
Transfer whole TWRP Folder into internal storage
Restore only boot and data
Swipe to restore
If you have backed up your internal storage folders do this
Reboot to recovery
Transfer all your internal storage folders
Reboot to system and done
Otherwise, just reboot to system. U can update OOS as well if it's outdated. The method is below to update OOS with ROOT. Up to u
RESTORING TWRP BACKUP HAS ISSUES ON THESE ROMs
CrDroid (Method 1 + 2 don't work). Method 3 works (install Gapps if the ROM doesn't have it!)
Restoring a Custom ROM TWRP backup 1
I tried using this method, but it didn't work for me.
You can use this method to switch ROMs too
Boot TWRP Recovery
Flash OOS + Finalize
Boot to bootloader, boot TWRP
Flash TWRP
Reboot Recovery
Transfer twrp backup
Restore System.img, Vendor.img and boot
Boot to system and setup system
Reboot to recovery
Restore data
Reboot system. Done
I had an issue with this method where rebooting system it was from fresh and my data didn't restore. If this happened to you, then do method 2 (Restoring a Custom ROM TWRP Backup 2)
Restoring a Custom ROM TWRP Backup 2
The first method didn't work for me. But this method did
Restore fresh like you're going back to OOS.
Choose one method. Fastboot or MSM method.
I prefer the fastboot method.
Download fastboot ROM using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Once booted into system, set it up briefly and DO NOT RESTORE ANYTHING.
Boot to bootloader
Boot TWRP
Install TWRP
Reboot recovery
Transfer whole TWRP Folder into internal storage
Restore everything (System.img, vendor.img, boot.img and data)
Swipe to restore. If data couldn't restore then boot system, setup system, boot TWRP and restore data.
Reboot system. The first reboot might go dodgy and it did for me.
Reboot system and transfer all your internal storage stuff
done
If this did not work still. Then do the 3rd method...
Restoring a Custom ROM TWRP backup 3
If the previous 2 methods has failed for you. Then try this.
Restore fresh like you're going back to OOS.
Choose one method. Fastboot or MSM method.
I prefer the fastboot method.
Download fastboot ROM using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Once booted into system, set it up and update to OOS version of your TWRP backup.
Download the full zip using the link in the Download Link section.
Transfer the OOS .zip to internal storage.
Go into settings -> system update -> Update via local upgrade -> find zip file and press install
Do this twice to make sure you have installed that version of OOS in both slots
Transfer TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to bootloader
Boot TWRP
Install TWRP
Reboot to Recovery
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Otherwise, just Format data -> reboot to recovery. Up to u
Reboot Recovery
Transfer twrp backup
Restore data
Reboot system. Done
If it still fails, repeat steps 1 to 15. But restore everything and you should be back on your custom ROM like you never left.
Updating OOS and Custom ROM
Update OOS with Root (Magisk)
Always do a TWRP backup before updating your OS in case
Download the full zip file of the latest OOS, transfer the zip file to internal storage NOT IN ANY FOLDER
Download and transfer twrp.zip file to internal storage
Go into settings, system update, update via local upgrade and choose the file
Wait till the installation has finished. If failed TRY AGAIN!
DO NOT REBOOT!
Go into Magisk Manager, modules
Find the twrp zip file and install TWRP
DO NOT REBOOT!
Go into Magisk Home
Press install
Press install via inactive slot
Reboot system and done
You will reboot into the next slot
You don’t have to repeat the installation to install the latest OOS in the other slot. But you should and I use this method many times and has never let me down.
Updating OOS without root
Go to System Update -> find the update install and reboot.
Or download the zip -> transfer to internal storage -> update via local upgrade -> reboot and done
Update a Custom ROM
Method 1
Always do a TWRP backup before updating your OS in case
Use this method just to update the ROM.
Boot recovery
Flash new version + twrp
Reboot recovery
Flash new version + twrp
If the ROM doesn't have GApps included,
The restore script should show up during the installation of the new ROM.zip
BUT if the restore script DIDN'T pop up do this
Reboot to recovery
Flash Gapps if not included
Reboot to system
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 2
This method uses finalize.zip
Boot recovery
Flash new version + finalize + twrp
If the ROM doesn't have GApps included,
The restore script should show up during the installation of the new ROM.zip
BUT if the restore script DIDN'T pop up do this
Reboot to recovery
Flash Gapps if not included
Reboot to system
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Updating vendor
Use Method 1 and 2 for ROMs with Gapps. Use Method 3 for ROMs with no Gapps included.
Method 1
If u haven’t updated your Custom ROM and your Vendor… You can use this method to update both or just the vendor.
Boot recovery
Flash OOS + twrp
Reboot recovery
Flash OOS + twrp
Reboot recovery
Flash Custom ROM + twrp
Reboot recovery
Flash Custom ROM + twrp
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system
Method 2
This method uses finalize.zip
Boot recovery
Flash OOS + finalize + twrp
Reboot recovery
Flash Custom ROM + finalize + twrp
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system
Method 3
This method is for ROMs with no Gapps included
You can use this method as well for updating to a vendor that has a NEWER ANDROID version like from OOS 10 to OOS 11 vendor.
Boot recovery
Flash OOS + Custom ROM + twrp
Reboot recovery
Flash OOS + Custom ROM + twrp
If u flashed GApps, the restore script should show up during the installation of the ROM.zip
If the GApps script didn't show up do this
Otherwise, skip step 3
Flash Magisk if u want root, otherwise skip step 2
Reboot to recovery
Flash Magisk
Flash Gapps
Reboot to system and done
Download Links:
SDK Platform Tools (Fastboot Tools) Here
OOS versions for OP6 (under Signed Flashable zips) Here
OOS versions for OP6T (under Signed Flashable zips) Here
TWRP for OP6 Here
TWRP for OP6T Here
Magisk Here
NikGapps Here
Stock Fastboot ROM for OP6 Here
Stock Fastboot ROM for OP6T Here
MSMDownloadTool for OP6 Here
MSMDownloadTool for OP6T Here
TitanumBackup App Here
Migrate App Here
Credits:
@mauronofrio For his amazing work on the TWRP recovery and Stock Fastboot ROMs for OP6/6T
@topjohnwu For his work on Magisk
@Nikgapps For their work on creating Gapps
@Some_Random_Username For his Collection of MSMDownloadTool for OP6/6T
@OPTeam For the collection of OOS zips for OP6/6T
@dreamwhite For the method (Method 3) of updating the vendor which works wonders for ROMs with no GApps included
First
Hey Guys,
Need a some expert advice please.
Long story short. I need to replace my OP 6T McLaren's battery as I have serious degradation in battery capacity (73% Serious Loss), meaning the battery is no longer charging to 3700mAh, max charging atm is around 2600mAh, which it drains very quickly. FYI Anything above 80% is the limit for average performance, >90% is best. You can use the OP Diagnostic App 1.0.0.9 to determine your own status. Does not work on all OP devices above 6 btw. Maybe other versions work. Anyway, will be getting OP to change the battery (no real local guys I can trust tbh, all Sammy & Apple guys...) and they want me to Factory Reset the device (complete wipe including internal storage (backed up already to PC)) before sending the device to the OP Repair Center for the obvious reasons of Privacy & Security.
On my device, I have a suite of apps that are no longer available to install with APK specially Signed, but won't be able to re-install (long story & can discuss in a PM more if there is an interest to help on this). These APK will not work any other way, I've tried! This being said, I know that TWRP Nandroids work well & have been doing these backups for yrs and have restored backups with these apps installed and it works! But I have not had to restore any as of late and TWRP Backup has somewhat changed in regards to the partition selections available. See TWRP Options pic below.
When OP returns the device to me, it will mostly likely be on the latest release of 10.3.11 (Hopefully).
Here is the current setup and runs perfectly!
OOS 10.3.11
TWRP: twrp-3.5.2_9-0-fajita
Magisk 23
The last Nandroid done today (No PW for good measure, but secured locally offline), I selected all partitions. Is this the best way to insure I get my full device backup restored?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm guessing that I will have to, Unlock the Bootloader, reinstall TWRP same version the Nandroid was created with in order to restore that backup.
Looking forward to hearing from you guys to make the best decision before proceed with the factory reset.
Thanking you all in advance for your time & assistance!
Cheers!
plepew said:
Hey Guys,
Need a some expert advice please.
Long story short. I need to replace my OP 6T McLaren's battery as I have serious degradation in battery capacity (73% Serious Loss), meaning the battery is no longer charging to 3700mAh, max charging atm is around 2600mAh, which it drains very quickly. FYI Anything above 80% is the limit for average performance, >90% is best. You can use the OP Diagnostic App 1.0.0.9 to determine your own status. Does not work on all OP devices above 6 btw. Maybe other versions work. Anyway, will be getting OP to change the battery (no real local guys I can trust tbh, all Sammy & Apple guys...) and they want me to Factory Reset the device (complete wipe including internal storage (backed up already to PC)) before sending the device to the OP Repair Center for the obvious reasons of Privacy & Security.
On my device, I have a suite of apps that are no longer available to install with APK specially Signed, but won't be able to re-install (long story & can discuss in a PM more if there is an interest to help on this). These APK will not work any other way, I've tried! This being said, I know that TWRP Nandroids work well & have been doing these backups for yrs and have restored backups with these apps installed and it works! But I have not had to restore any as of late and TWRP Backup has somewhat changed in regards to the partition selections available. See TWRP Options pic below.
When OP returns the device to me, it will mostly likely be on the latest release of 10.3.11 (Hopefully).
Here is the current setup and runs perfectly!
OOS 10.3.11
TWRP: twrp-3.5.2_9-0-fajita
Magisk 23
The last Nandroid done today (No PW for good measure, but secured locally offline), I selected all partitions. Is this the best way to insure I get my full device backup restored?
View attachment 5319753
I'm guessing that I will have to, Unlock the Bootloader, reinstall TWRP same version the Nandroid was created with in order to restore that backup.
Looking forward to hearing from you guys to make the best decision before proceed with the factory reset.
Thanking you all in advance for your time & assistance!
Cheers!
Click to expand...
Click to collapse
Idk if u have read Mauronofrio's XDA thread on TWRP backups. BUT NEVER BACKUP OR RESTORE SYSTEM OR VENDOR! From my guide, you don't need to backup vendor.img or system.img or anything else that's not Boot or Data FOR OOS. Make sure you have everything like a copy of everything folder/file in your internal storage before u wipe it.
BUT because you're going to wipe your device. U should have a copy of everything in case but don't backup system or vendor as they're useless and will crash your system if u restore those!
After you've got your device from repair, follow my method to restore OOS TWRP backup on your device and YOU'LL only NEED TO RESTORE BOOT + DATA. Once you have booted back to your system, everything should be there like you never left, but transfer your internal storage stuff as some apps store files in your internal storage. Once that is done, that should be it and it would be like you've never left
If the TWRP backup restore doesn't work let me know, but from my experience with going back to OOS via my TWRP backup I only backed up and restored boot + data for OOS. Custom ROMs are different but isn't the case for you
Extreme_Ninja2099 said:
Idk if u have read Mauronofrio's XDA thread on TWRP backups. BUT NEVER BACKUP OR RESTORE SYSTEM OR VENDOR! From my guide, you don't need to backup vendor.img or system.img or anything else that's not Boot or Data FOR OOS. Make sure you have everything like a copy of everything folder/file in your internal storage before u wipe it.
BUT because you're going to wipe your device. U should have a copy of everything in case but don't backup system or vendor as they're useless and will crash your system if u restore those!
After you've got your device from repair, follow my method to restore OOS TWRP backup on your device and YOU'LL only NEED TO RESTORE BOOT + DATA. Once you have booted back to your system, everything should be there like you never left, but transfer your internal storage stuff as some apps store files in your internal storage. Once that is done, that should be it and it would be like you've never left
If the TWRP backup restore doesn't work let me know, but from my experience with going back to OOS via my TWRP backup I only backed up and restored boot + data for OOS. Custom ROMs are different but isn't the case for you
Click to expand...
Click to collapse
Wow, thanks for the quick reply!
I have not read Mauronofrio thread and will do!
I completely missed the system & vendor piece in your instructions....my bad!
So just to confirm, my backup that I have done with all checked off is good, but only restore Boot & Data with an exact duplicate of the current Internal Storage...right?
Going forward, when creating the Backup, just select Boot & Data and I'm good to go? Or select all Except: System Image(only) & Vendor options (both)?
Also, just so I can understand a bit better, "System" is the actual OOS? Meaning, if I restore Boot & Data on any OOS, all my apps and data will be as I never left, or we should always restore on the OOS that was current at the moment of the Backup (which I have always done in the past).
PS. I may just do the backup again, just to make sure SYSTEM & VENDOR are not there for good measure!
plepew said:
Wow, thanks for the quick reply!
I have not read Mauronofrio thread and will do!
I completely missed the system & vendor piece in your instructions....my bad!
So just to confirm, my backup that I have done with all checked off is good, but only restore Boot & Data with an exact duplicate of the current Internal Storage...right?
Going forward, when creating the Backup, just select Boot & Data and I'm good to go? Or select all Except: System Image(only) & Vendor options (both)?
Also, just so I can understand a bit better, "System" is the actual OOS? Meaning, if I restore Boot & Data on any OOS, all my apps and data will be as I never left, or we should always restore on the OOS that was current at the moment of the Backup (which I have always done in the past).
PS. I may just do the backup again, just to make sure SYSTEM & VENDOR are not there for good measure!
Click to expand...
Click to collapse
First off, I already posted everything you need in my last comment and that's what I usually do. Everything should be there and not like you need to pay or reply to get the extra stuff that you may need. No point in replying asking for more as I'll just be repeating myself over and over.
Just choose boot & data for TWRP backups for OOS specifically going forward and after you got your device from repair. System, vendor doesn't work in my experience and will crash your system. Only backup the .img variant which was stated by the dev (Mauronofrio) for TWRP for OP6/6T devices. Only backup system.img and vendor.img if u need to backup system+vendor, but YOU don't have to for OOS and I said this previously.
JUST DO A BACKUP OF EVERYTHING OTHER THAN SYSTEM AND VENDOR. YOU SHOULD ONLY BACKUP SYSTEM.IMG AND VENDOR.IMG NEVER SYSTEM OR VENDOR.
They never work and will increase the size of your backup and will take even longer to transfer to your storage device from your phone.
YES, to your new question. You should update/ be on the same OOS version as your TWRP backup before u restore data + boot. Restore OOS via fastboot or msm and update to get to the same version of OOS as your TWRP backup. YOU should only do this if your phone is in the wrong version of OOS as your backup after you've got it back from REPAIR.
ALWAYS BE ON THE SAME VERSION OF OOS AS YOUR TWRP BACKUP BEFORE YOU RESTORE YOUR TWRP BACKUP OF OOS!
Maybe take a copy of your wifi passwords, take a google backup in settings, take a copy of sms/call logs and contacts. Other stuff that you may not have stored just in case the TWRP backup fails, but it shouldn't. Good luck
This should be it and there isn't anything else that you'll need
Extreme_Ninja2099 said:
First off, I already posted everything you need in my last comment and that's what I usually do. Everything should be there and not like you need to pay or reply to get the extra stuff that you may need. No point in replying asking for more as I'll just be repeating myself over and over.
Just choose boot & data for TWRP backups for OOS specifically going forward and after you got your device from repair. System, vendor doesn't work in my experience and will crash your system. Only backup the .img variant which was stated by the dev (Mauronofrio) for TWRP for OP6/6T devices. Only backup system.img and vendor.img if u need to backup system+vendor, but YOU don't have to for OOS and I said this previously.
JUST DO A BACKUP OF EVERYTHING OTHER THAN SYSTEM AND VENDOR. YOU SHOULD ONLY BACKUP SYSTEM.IMG AND VENDOR.IMG NEVER SYSTEM OR VENDOR.
They never work and will increase the size of your backup and will take even longer to transfer to your storage device from your phone.
YES, to your new question. You should update/ be on the same OOS version as your TWRP backup before u restore data + boot. Restore OOS via fastboot or msm and update to get to the same version of OOS as your TWRP backup. YOU should only do this if your phone is in the wrong version of OOS as your backup after you've got it back from REPAIR.
ALWAYS BE ON THE SAME VERSION OF OOS AS YOUR TWRP BACKUP BEFORE YOU RESTORE YOUR TWRP BACKUP OF OOS!
Maybe take a copy of your wifi passwords, take a google backup in settings, take a copy of sms/call logs and contacts. Other stuff that you may not have stored just in case the TWRP backup fails, but it shouldn't. Good luck
This should be it and there isn't anything else that you'll need
Click to expand...
Click to collapse
Thank you!!
Hey guys, for some reason I ended up on "Unmodified System Partitions", must have tapped the screen a few times in error while handling the phone I guess.
What should I do?
Unable to go back to TWRP main menu without selecting an option.
I am rooted, on stock OOS and not doing customs ROM at this time...
What should I do?
Select "Keep Read Only"? or Swipe to "Allow Modifications"?
thanking you guys in advance for you help & guidance!
plepew said:
Hey guys, for some reason I ended up on "Unmodified System Partitions", must have tapped the screen a few times in error while handling the phone I guess.
What should I do?
Unable to go back to TWRP main menu without selecting an option.
I am rooted, on stock OOS and not doing customs ROM at this time...
What should I do?
Select "Keep Read Only"? or Swipe to "Allow Modifications"?
View attachment 5320971
thanking you guys in advance for you help & guidance!
Click to expand...
Click to collapse
Swipe to allow modifications. But it seems that your internal storage corrupted. Not sure what you did and how you got into this situation.
After you swiped to allow modifications... If the internal storage files are a messed up, try to switch slots and reboot recovery
Extreme_Ninja2099 said:
Swipe to allow modifications. But it seems that your internal storage corrupted. Not sure what you did and how you got into this situation.
After you swiped to allow modifications... If the internal storage files are a messed up, try to switch slots and reboot recovery
Click to expand...
Click to collapse
I swiped and yeah, the IS was messed up in File Managfer(TWRP).
Selected Reboot then Selected the Slot I remembered I was on : "A"
Rebooted & Boom all good!
Thank you for the help once again! You rock!!
plepew said:
I swiped and yeah, the IS was messed up in File Managfer(TWRP).
Selected Reboot then Selected the Slot I remembered I was on : "A"
Rebooted & Boom all good!
Thank you for the help once again! You rock!!
Click to expand...
Click to collapse
Cool and at least that was a easy fix
Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!
Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!
jas84701 said:
Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!
Click to expand...
Click to collapse
Well u posted this twice which isn't necessary and people will try and reply. But I'm not sure if there is a way to know and as long as u copied the whole TWRP folder for that backup, u should be fine restoring it with a newer version of TWRP. If it really matters to you, then maybe try and find the latest TWRP on the date you did the backup? I think just using a newer TWRP version should be fine
Should I use the same Gapps package I flashed during clean installing when updating custom rom?
Waynenolan92 said:
Should I use the same Gapps package I flashed during clean installing when updating custom rom?
Click to expand...
Click to collapse
U don't have to use the same gapps package. Using a updated one would be better. But, u only have to for ROMs that don't include gapps (vanilla builds) AND the Restore script doesn't show up during installation. Opengapps doesn't have that script but nikgapps does. Using dirty flash/updating a ROM should show the restore script and if it doesn't then just reboot to recovery and flash the updated or same gapps package. This can also be the same for updating the base/vendor (use method 3 in that section of the guide). I hope this helps
Extreme_Ninja2099 said:
U don't have to use the same gapps package. Using a updated one would be better. But, u only have to for ROMs that don't include gapps (vanilla builds) AND the Restore script doesn't show up during installation. Opengapps doesn't have that script but nikgapps does. Using dirty flash/updating a ROM should show the restore script and if it doesn't then just reboot to recovery and flash the updated or same gapps package. This can also be the same for updating the base/vendor (use method 3 in that section of the guide). I hope this help
Click to expand...
Click to collapse
Thanks for your replay)))it's my first using vanilla rom(without Gapps), so I flashed nikigapps Omni package, and my question is: should I always use the same package, or I can go with core package for example?
Waynenolan92 said:
Thanks for your replay)))it's my first using vanilla rom(without Gapps), so I flashed nikigapps Omni package, and my question is: should I always use the same package, or I can go with core package for example?
Click to expand...
Click to collapse
U can... But it doesn't really matter as a updated package works fine and u only need to use it if the nikgapps restore script doesn't show up when updating the ROM or vendor/base (OOS underneath)
I want to CHANGE custom ROMs (havoc to Lineage OS a11 to a12) I have taken TWRP back up of boot+data+system.img+ vendor.img. once I flash the new a12 Lineage plus Nikapps core plus magisk. What steps to restore data? any response is appreciated in advance. Thank you.