Related
Hey everyone,
I recently purchases a custom zagg skin and the invsibleSHIELD ,
The zaggskin is easy to put on the back of your HD2 , its a little bit smaller, but that makes the process of putting it on easier (It took me like 2 min?),
Before the invsibleSHIELD I tried various screen-protectors , but I always had bubbles or dust underneath them.
With the invsibleSHIELD I just followed instructions , and volla , no airbubles, no dust , its makes the screen even brighter.
One negative point about it, its pricey , i ordered mine during Memorial Day (50 percent off),
Regards,
PS: Sorry for my bad english
How can a cover make the screen brighter? Are these skins polarized or something? I'm curious.
All this is rubbish, I understand the need for a big silicon or hard cover to protect your phone from drops but what is the point of the invisible shield when you cant scratch the phone anyway. There is no way it can make the screen brighter, or make you see better in the sun.
Some screen protector companies even claimed that only the person looking right at the device can see the screen, so therefore if someone was trying to peak over to see what you are doing they couldn't, well I ordered that and obviously it is not true not even slightly dimmed from the sides. so don't believe everything they say.
invisible shield
i wont take the chance of scratching my screen even if its impossible
invisible shield is not only on the front but on the back too.
its less sensitive for oily fingerprints - maybe that is why it looks a little bit brighter than without. before i had it, it was difficult to see in sunlight and now its better.
plus, the device wont slip of your hand, again do to the back cover.
so, i recommend invisible shield sincerely
cheers
thumbs down
My zagg sheild pretty much rendered my HD2 useless. The screen was really desensitized way too much. I'm not surprised...the zagg shield is so thick and durable that if I didn't have to "touch use" my screen, it would have been perfect. I ended up tearing of the $20+ protector and discarding it...
unni3063 said:
My zagg sheild pretty much rendered my HD2 useless. The screen was really desensitized way too much. I'm not surprised...the zagg shield is so thick and durable that if I didn't have to "touch use" my screen, it would have been perfect. I ended up tearing of the $20+ protector and discarding it...
Click to expand...
Click to collapse
No problems here, and the screen protector isn't that thick, its just even thick like any other screen protector ,
Munto said:
All this is rubbish, I understand the need for a big silicon or hard cover to protect your phone from drops but what is the point of the invisible shield when you cant scratch the phone anyway. There is no way it can make the screen brighter, or make you see better in the sun.
Some screen protector companies even claimed that only the person looking right at the device can see the screen, so therefore if someone was trying to peak over to see what you are doing they couldn't, well I ordered that and obviously it is not true not even slightly dimmed from the sides. so don't believe everything they say.
Click to expand...
Click to collapse
The HD2 screen can be scratched, there are examples of it on this forum, just search.
Spending $10-20 on a quality screen protector is probably the cheapest insurance you could get to protect your screen if/when you scratch the protector and the scratch becomes unbearable, spend $10-20 on a new one
Though Ive not seen one before for mobile phones, there are privacy screens for laptop/desktop monitors. These screens significantly blur the image unless you are directly in front of the screen, if you tilt the screen more than 10degrees or so the screen will blur. These are used a lot in medical/financial institutions, sensitive departments within companies like HR. Ive seen these appearing on ATMs now too
I will agree there is no protector that will make your screen "brighter" that's just about impossible, anything put over the screen is actually going to attenuate any light coming though it, though it may not be perceivable. Certain protectors may eliminate screen glare, making the screen easier to see in certain lighting conditions
ohhh yeah, believe me the screen CAN be scratched! got two very nice ones to prove it. lol
d0ug said:
The HD2 screen can be scratched, there are examples of it on this forum, just search. ....
Click to expand...
Click to collapse
Well about the brighter , i have the the shield now for a week, the screen looks better because there are no fingerprints on the screen , further its scrolls smoother
Sorry but I'd stay clear from Zagg's Invisible Shiled as it is not really effective nor fully stand their claim "as advertised".
After 3-4 months of use (in tropical countries or desert areas), the sands/dirts snug into the linings, then started to peel off little by little.
Had this product on my Fuze and then my Topaz a while back, not very happy about it.
The only good things about the product is (1)fancy retail packaging, and (2)their screen protector. Sorry.
This cover is useless. I removed it after a couple of hours. What's the use of having a screen protector that doesn't cover the whole screen? Apart from the fact that it makes the screen look ugly.
erosennin said:
This cover is useless. I removed it after a couple of hours. What's the use of having a screen protector that doesn't cover the whole screen? Apart from the fact that it makes the screen look ugly.
Click to expand...
Click to collapse
It needs to sit for at least 12 or more hours to let the solution and bubbles disappear. If you had it on for a couple of hours and not days, then you did not read the instructions If applied properly you should not see it. If it looks ugly, it was not done properly or you did not let it cure long enough before using the device.
I have noticed that not all of the plastic used with Zagg products seem to be the same. I have applied one on my Tilt2 (aka. Touch Pro 2) and it did not feel like the texture of an "orange peal" like I have seen written in some reviews. I no longer have the Invisa Shield on the screen as it started to come up on the edges by the chrome phone edging causing lint, dust, etc. to collect under. I also noticed it turn a slight yellow. The colour change was odd as I don't smoke or hang out with smokers. It could be from rubbing against the lining of my leather case I kept it in (although it has a black lining).
At my work we have a Zagg promo for Apple iPads and this is where I have come across the "orange peal" texture on a few of the installs. I don't think it is due to improper install as we always use the same solution and method of install for each one.
In short:
the pros: it protects well against scratches and minimizes the look of finger prints
the cons: could gain a yellow tinge after several months, not easy to remove dust/dirt if it gets under edges, and not easy to apply first time around for most.
My advice for capacitive screens is to not spend lots on a screen protector. The cheep vinyl protectors may not look as good but will work just as well. Remember: all capacitive screens are made of glass which will not scratch under normal use. If you keep your phone in your pocket, the chances for scratching will increase as sand or tiny bits of gravel can collect in the lining and rub against the screen. Even keys can scratch if enough pressure is applied. For those who saw the YouTube HD2 scratch test, did you see how much pressure was applied to the keys, knife, and scissors? Not enough to scratch it, add enough and it will...
Dangerously said:
It needs to sit for at least 12 or more hours to let the solution and bubbles disappear. If you had it on for a couple of hours and not days, then you did not read the instructions If applied properly you should not see it. If it looks ugly, it was not done properly or you did not let it cure long enough before using the device.
I have noticed that not all of the plastic used with Zagg products seem to be the same. I have applied one on my Tilt2 (aka. Touch Pro 2) and it did not feel like the texture of an "orange peal" like I have seen written in some reviews. I no longer have the Invisa Shield on the screen as it started to come up on the edges by the chrome phone edging causing lint, dust, etc. to collect under. I also noticed it turn a slight yellow. The colour change was odd as I don't smoke or hang out with smokers. It could be from rubbing against the lining of my leather case I kept it in (although it has a black lining).
At my work we have a Zagg promo for Apple iPads and this is where I have come across the "orange peal" texture on a few of the installs. I don't think it is due to improper install as we always use the same solution and method of install for each one.
In short:
the pros: it protects well against scratches and minimizes the look of finger prints
the cons: could gain a yellow tinge after several months, not easy to remove dust/dirt if it gets under edges, and not easy to apply first time around for most.
My advice for capacitive screens is to not spend lots on a screen protector. The cheep vinyl protectors may not look as good but will work just as well. Remember: all capacitive screens are made of glass which will not scratch under normal use. If you keep your phone in your pocket, the chances for scratching will increase as sand or tiny bits of gravel can collect in the lining and rub against the screen. Even keys can scratch if enough pressure is applied. For those who saw the YouTube HD2 scratch test, did you see how much pressure was applied to the keys, knife, and scissors? Not enough to scratch it, add enough and it will...
Click to expand...
Click to collapse
How many times there have to be said that this capacitive screen is not made from GLASS, there are enough people one the web which HD2 got scratched, believe they will scratch
I have the full body zagg skin. Gotta say it's great. Simple to apply and really keeps the device from getting scratched. Even protects the corner. Don't get what the complaint above was about. It covers the screen so wtf are you talking about? Only thing I wish they'd fix is that you can't apply a skin or case over it. If you do it'll get stuck to it unless it's like a cloth case or something. Hope they fix that issue one day. Still not bad, plus I did like the OP and ordered on Memorial Day for like 12 dollars.
How does it cover the Back ?
in 3 parts does it ?
thanks
ilordvader said:
How does it cover the Back ?
in 3 parts does it ?
thanks
Click to expand...
Click to collapse
ya, but it does not cover 100 percent
Jalaluddin said:
ya, but it does not cover 100 percent
Click to expand...
Click to collapse
Thanks for reply
Can someone post some pics
front & back to get a idea how it looks
Thanks
Glue softens
I have to say I was happy for around 5 months - until it started to get warmer. Then the glue started to soften and smear out from under the shield. It made the screen look a bit of a mess and ultimatly the corners started to flap about because all of the glue had gone. Contacted Zagg customer support and they admitted this can happen when warm and humid. They suggested I use their replacement service but why should I pay around 6€ for postage in both directions if as soon as it gets warm it will be a mess again. Not very impressed. I'll stick to the electrostatic screen shields in the future. Can anybody recommend one?
Warning!!!!!!!! You really can crack your glass by following the directions below, Please, read no further and leave now. If you, crack your screen, set your house on fire, or sever an artery (broken glass) then bleed out and die......well, you were warned!!!!!!!!!!!!!!
Okay, if your still here, read on and good luck.
Samsung Galaxy S Screens are smooth and silky! Even the name, gorilla - tough and glass- vulnerable, says sex;
Well, how can we get a sexy Fay Wray G.Tab screen surface from a humble sandpapered plain Jane surfaced NC screen?
The secret is............RAINX.....That's right, the same stuff you want on your windshield in a downpour, will with proper application, impart that silky smoothness you secretly crave.
APPLICATION:
1. Use "The original" rainX. (Caution: it is flammable)
2. Clean glass surface really, really...no really good. (Remove oils, alcohol works)
3. Use clean paper towels, fold into squares (4 or 5 )
4. Dampen towel applicator and scrub surface (Don't Crack Your Screen! Work into micropores of glass surface)
5. Dry to haze (for humidity over 10% use a blow dryer...low heat!)
6. Polish methodically...lots of clean dry paper towels (Don't Crack Your Screen!)
7. REPEAT (It took me 3 times)
Warning!!!!!! Do not, I repeat, Do not allow your girl/boy/wife/husband to touch the new silky surface; not if you ever want either of them back, that is.
Thanks for posting. Just a couple questions...
First, does this prevent finger oils from messing up the screen?
Next, wouldn't windex/alcohol remove the rainx then next time you cleaned your screen? It does on windshields... If so (and if it doesn't prevent finger grease marks), then I think you'd have to do this process over and over, each time you cleaned your screen.
Bimboy said:
Thanks for posting. Just a couple questions...
First, does this prevent finger oils from messing up the screen?
Next, wouldn't windex/alcohol remove the rainx then next time you cleaned your screen? It does on windshields... If so (and if it doesn't prevent finger grease marks), then I think you'd have to do this process over and over, each time you cleaned your screen.
Click to expand...
Click to collapse
Why are u using windex or alcohol? Just use a micro fiber cloth. No chemicals.
Uh, yeah, I wouldn't advise using Windex or alcohol on any screen. If a simple microfiber cloth won't clean it, add a drop of water for the tough stuff.
or just use tv cleaners
RainX application maintenance
WFINGER
Bimboy said:
Thanks for posting. Just a couple questions...
First, does this prevent finger oils from messing up the screen?
Next, wouldn't windex/alcohol remove the rainx then next time you cleaned your screen? It does on windshields... If so (and if it doesn't prevent finger grease marks), then I think you'd have to do this process over and over, each time you cleaned your screen.
Click to expand...
Click to collapse
Finland_2_Cupertino said:
Why are u using windex or alcohol? Just use a micro fiber cloth. No chemicals.
Click to expand...
Click to collapse
Bimboy, yes it does help with the finger oils. I think it works by preventing the oils from settling into the glass micropores. You still get smugdes and fingerprints but they wipe off much, much easier.
As Finland 2 suggested, once applied, a microfiber cloth is all that is needed to maintain the new finish. I expect it to last quite a while, since on a windsheild even with wipers and rain, an application usually. Lasts up to a month.
A little spritz of Stoner Invisible Glass (for autos) on a microfiber cloth does a good job getting the NC glass as smooth as a Tab too. Fights fingerprints for a bit, and doesn't take any effort. A can should last you a lifetime.
Pledge furniture polish spray will also help (it's pretty popular for cleaning helmet visors and motorcycle windscreens) and will also keep the prints down on the plastic bezel area (and back). Once again, apply it to a cloth first, don't spray it directly on the NC.
O your can just get a nice Screen protector like the AntiGlare one B&N Sell..........
Makes my screen silky smooth and protects it from scratches.... Why would I want to waste time using rainx and a process that could hurt the screen?
Also Rubbing alcohol with Microfiber Cloth Works Great to clean the screen, gets ride of all the oil and grim. Do not use anything but a Microfiber Cloth(As it could scratch the screen), Also Pure alcohol wont hurt the screen, its Ammonium based products and harsher Chemicals like that you need to watch out for. Alcohol is a prove safe method for cleaning Plastics even Internal Computer parts wont be hurt by Rubbing Alcohol.
I use to by screen protectors for all phones back when they had the plastic resistive screens. So far I have yet to scratch any of my glass capacitive ones. I did buy a used ipad from someone that managed to scratch the glass, it can barely be seen but it is there. So I'm on the fence about a screen protector for the nook. I probably won't get one for the nook but if i buy a $500+ tablet you can bet I will put one on.
I don't like the drag created when using a Zagg (invisible sheild) soft films but I don't mind the harder plastic ones that you occasionally have to replace.
gedster314 said:
I use to by screen protectors for all phones back when they had the plastic resistive screens. So far I have yet to scratch any of my glass capacitive ones. I did buy a used ipad from someone that managed to scratch the glass, it can barely be seen but it is there. So I'm on the fence about a screen protector for the nook. I probably won't get one for the nook but if i buy a $500+ tablet you can bet I will put one on.
I don't like the drag created when using a Zagg (invisible sheild) soft films but I don't mind the harder plastic ones that you occasionally have to replace.
Click to expand...
Click to collapse
I'm kinda in your camp, I've never found a screen protector that I wanted to use. They may be out there, but the trade offs, for me at least, seem to out weight the advantages in day to day use. Since I use a cover for my NC, I don't have to worry about objects in my pocket, keys and such, gouging my screen.
I know the RainX thing isn't for every one, and there may be easier ways to achieve the smooth surface effect, but I have found it to have worked very well. Before treating the screen, it would take a lot more microfiber polishing to remove finger oils or smudges, but now they come off very easily.
I've been using 'Gel Gloss No-Streek' for years on all kinds of glass stuff. It really is the best that I've found and it is pretty cheap. I used it on my nC and it is 'silky smooth' and resists fingerprints extremely well. One word of note though is that the polish does contain 'petroleum distillates and ammonia' so you have to be careful handling it and it stinks. Also, like most good quality polish you want to apply it to a cloth first, then to the nC, don't apply directly to the nC.
Here is a link to the stuff I bought.
http://www.amazon.com/Industries-NS-8-8OZ-Glass-Polish/dp/B000IO8GWC
Matte Anti-glare screen filter is the way to go
gedster314 said:
I use to by screen protectors for all phones back when they had the plastic resistive screens. So far I have yet to scratch any of my glass capacitive ones. I did buy a used ipad from someone that managed to scratch the glass, it can barely be seen but it is there. So I'm on the fence about a screen protector for the nook. I probably won't get one for the nook but if i buy a $500+ tablet you can bet I will put one on.
I don't like the drag created when using a Zagg (invisible sheild) soft films but I don't mind the harder plastic ones that you occasionally have to replace.
Click to expand...
Click to collapse
I feel ya. I think you would be presently surprised with the Nook AntiGlare Matte filter available at Barnes and Noble. It's $15 and really does make the screen feel smooth, while at the same time resisting finger prints and smudges really well. A night and day improvement over the oddly tacky feel of the nook color screen. They give you two of them. Oh, and it's the "hard" type of plastic, not the flimsy cheap stuff.
RainX is not going to keep your screen from getting scratched. It also will probably increase and not reduce glare.
Gel gloss, isnt that for fiber glass?
Sent from my SAMSUNG-SGH-I897 using XDA App
So I picked up a screen protector on Amazon by ArmorSuit... it seemed to have solid reviews and I heard reports of great customer service, so I spent the 20 bones to pick one up. I just now applied it, and it went on well without a hitch. Since it was a wet protector and majority of my screen protector experience was with dry ones, I watched the YouTube video and also thoroughly read the instructions. Last thing I wanted to do was install a wet protector incorrectly and mess up my device.
Once done I checked out the finish. Despite the fact it's been 20 minutes and not 12-24 hours like they say to let it sit, I noticed lots of tiny scratches on it, which definitely looked like it was from the applicator card. What baffles me more is I have a microfiber cloth that came with the kit that I was wiping the screen off with... I noticed even swirly scratches after I was done, yet this microfiber cloth has nothing in it whatsoever!
Er, uh. Has anybody ran into anything like this with screen protector application?
Despite this, I'm still relatively happy with the screen protector as it fits perfectly and was very quick and easy to install. That being said, I'm still a little disappointed in what I'm seeing here, but I'd still trade hairline scratches that aren't that visibleat all (and not visible whatsoever with the screen lit up) versus air bubbles and dust pockets which clearly are visible regardless... which is almost always the case with dry protectors... Don't get me wrong, it's not like it's a series of key-gouging lines here, but when video installation guide shows the tilted tablet glaring off of the ceiling light to show it is 100% smooth and flush with a perfect glass-like surface, that's where I can see these very fine marks.
Maybe, just maybe, this is some sort of epic self-healing screen protector that'll remove those blemishes over the next day as it sits. :laugh: Yes, just maybe.
EDIT, er... uh... under the bulleted list of features I found these two items that I may have overlooked when I first purchased it:
Self-healing technology , Military grade material engineered for your specific device
ArmorSuit Lifetime Replacement Warranty *Made in the USA*
lol????
My ArmorSuit came with a nice horizontal scratch in it and these visible shallow 'gouges'. I'm guessing from the installation card. I'm getting rid of it as it just doesn't look clean. Looks like a thin slab of rubber and not perfectly flat like the glass. YMMV though as I know I didn't install it Grade A, but still, I can't imagine that this screen protector can look or feel like glass.
Part of me like the feel of these wet protectors, but it does feel unnatural and sort of tiring to use. I opted for the 3-pack of CrazyOnDigital (clear) protectors. I figure I will mess up 1, get 1 right, and keep 1 for next year.
For installing via wet method (sounds dirty no? lol) you have to get almost everything but the device "wet". That includes your fingers and the screen protector (both sides) itself and also the squeegee or card or whatever you call it...
I have seen what is called 'burn' marks if not properly wet. Sucks I know! But The wet products in my experience are always great when finally dry. I have the XO skin and it's about totally dry. Looks great IMO.
"burn marks" sounds about right
kpjimmy said:
For installing via wet method (sounds dirty no? lol) you have to get almost everything but the device "wet". That includes your fingers and the screen protector (both sides) itself and also the squeegee or card or whatever you call it...
I have seen what is called 'burn' marks if not properly wet. Sucks I know! But The wet products in my experience are always great when finally dry. I have the XO skin and it's about totally dry. Looks great IMO.
Click to expand...
Click to collapse
I'm not sure how much more wet you can get a screen protector when it's already dripping, which was the status of it when I placed it on the screen. Likewise, I did wash my hands just prior and also had my hands both completely saturated in the provided fluid.
Burn marks sounds like some food for thought, but I'm unsure how you can get a burn mark from a microfiber cloth when I'm wiping the screen off in a circular motion. I mean, I didn't attach it to a circular sander or anything...
So in the event this magical self healing thing doesn't live up, what other screen protector would you guys recommend? I definitely want to go with a wet application, as I'm already able to tell a world of difference, but I'm a little dissatisfied with how incredibly sensitive this protector is to scratches. It's great you can take a dremel to it and it still protects the actual tablet screen but when a microfiber cloth scratches it I can't say it impresses me.
EDIT - Just got an email response from them minutes ago. The bulk of the message is pasted below:
Regarding the marks on your screen protector:
Any filmy marks, air bubbles, swirl marks or haze underneath the screen protector is due to the solution, which can take up to 2 weeks to go away. It typically doesn't take this long, but it will eventually go away because the material is designed to be breathable. This will release any trapped solution.
Regarding the scratches on your screen, here is a quick and easy fix.
1. Please turn off your device.
2. With your screen protector still on your device, spray 1 pump on the screen protector and then spread the solution evenly with the included microfiber cloth.
3. The scratches should then disappear soon, within a few days at the very most because the material is self-healing.
Click to expand...
Click to collapse
I guess I'll have to be a little more patient and see what happens.
Not sure why they don't just put this in the instructions, but here's a trick:
When you're pushing the bubbles out, put the piece of plastic that you peeled the protector off of over the screen. Don't ever use the squeegee directly on the screen.
slack04 said:
Not sure why they don't just put this in the instructions, but here's a trick:
When you're pushing the bubbles out, put the piece of plastic that you peeled the protector off of over the screen. Don't ever use the squeegee directly on the screen.
Click to expand...
Click to collapse
I thought the same thing, but once I realized that the microfiber cloth was giving swirl marks, that whole premise behind that idea kind of crumbled. If a microfiber cloth will legitimently give this screen protector swirl scratches from wiping it clean, then that's pretty fail.
That being said, I'm remaining quite optimistic about this "self healing" thing. Maybe I will see them slowly disappear? Who knows. It is a little more comforting knowing they have a lifetime guarantee, but we'll tackle that conversation when/if it ever becomes necessary. At any rate, I keep reminding myself - at least the screen protector still looks 1000% better than any dry screen protector AND it's protecting the screen in the process. :good:
cfn87 said:
My ArmorSuit came with a nice horizontal scratch in it and these visible shallow 'gouges'. I'm guessing from the installation card. I'm getting rid of it as it just doesn't look clean. Looks like a thin slab of rubber and not perfectly flat like the glass. YMMV though as I know I didn't install it Grade A, but still, I can't imagine that this screen protector can look or feel like glass.
Part of me like the feel of these wet protectors, but it does feel unnatural and sort of tiring to use. I opted for the 3-pack of CrazyOnDigital (clear) protectors. I figure I will mess up 1, get 1 right, and keep 1 for next year.
Click to expand...
Click to collapse
I ordered the exact same 3-pack and I have to say they're great. Got it perfect on the first try and it looks crystal clear. It looks a lot better than those $10-$20 dollar protectors out there.
Sent from my Nexus 7 using xda premium
So after going through many TGSPs and finding pretty much all of them terrible, I found a off-the-wall solution that seems to tic off all of the major check marks for me:
Smooth glass-like surface
Great touchscreen sensitivity
Great optical clarity
Won't peel off (obviously)
Turns out, it's not just one solution, but a combination of two different screen protectors used in conjunction. This might be a long post but stay with me here.
First thing I tried long ago was the wet-apply TPU stuff from IQ-Shield. It's actually a great product if you put it on properly and is fairly inexpensive. The application might be a pain for some (I didn't mind it so much). But I'd always hated the texture and tackiness of the surface. Also, it's aways a bit sharp at the edges that it bothered me to hold it. And strangely, these are easy to scratch. The scratches really show on them too. They're also smudge magnet and look terrible unless thoroughly clean.
Then I tried all of the major TGSPs on the market (GPEL, ZAGG, AmazingThing and a few cheaper stuff) and while many of them looked great, the glare and touchscreen sensitivity was always anywhere between inadequate to terrible.
Then I looked in this PET(I think?) plastic stuff from G-Color
https://www.amazon.com/dp/B01FTUB74S..._t1_B01FTUB74I
Turns out this stuff is pretty great. It honestly feels as smooth as glass. Looks like glass. Screen sensitivity was awesome. clarity was amazing. I can also atest to it durability as well. I'd been moving my futon around a bit and had the phone perched on the the backrest. The phone fell onto the metal frame of the futon, glassface first. the impact messed up the screen protector and it got warped at the impact site, but the phone glass was fine. Great start so I ordered another immediately.
But low and behold, after another two weeks or so of usage, the edge began to lift. Turns out the silicone adhesive, which works fine on flat glass, doesn't do so well with curved glass long term.
Disappointed, I thought about ways of giving it extra adhesion then I remembered that the TPU stuff is very tacky. So I washed and re-applied (wet) the IQ-Shield stuff. I let it set until all the air and water bubbles disappeared (about two days). Then I washed the G-Color piece (it had lint and dust stuck on it). I applied that one wet as well (yes you can apply PET protectors wet) right on top of the IQ-Shield. Gave it another few ways days to set and the bubbles disappeared. I was astonished by the results. I got all of the things I was look for above. I tried force peeling the edge off and I was very surprised how hard it was to do. I gave it three weeks and it had been flawless.
I went and bought another G-Color piece (this time in white). Of course taking the first (gold) one off you probably have to reapply the TPU one underneath. A second round of thorough washing and reapplying the IQ-Shield (I didn't have to buy a new one. As long as you wash it correctly with dish soap and are careful, you can reuse them). Once again, let it set over a couple of days.
Since it was the first time I applied the new G-Color piece, I applied it dry as instructed on package. You'd only need to apply the PET stuff wet if you're reapplying for second time after washing. The first time should be dry using the guide stickers. The results were similar (maybe a bit better since I was using a brand new G-Color piece). It's been a month and a half now. Flawless. Well almost: Since I applied the G-Color with white bezel over a black phone, its white part is not as bright-white as it could be. More like a white-grey, but unless you butt it up to another white phone, you won't notice. The gold one looks completely gold.
So now I have a phone protected by two layers. The two layers together are also a bit thinner than a single TGSP. It looks completely like glass and I've been amazed how scratched resistant it has been. They're also smudge and fingerprint resistent.
Another check mark that might matter to some, but not me: Case-friendliness. Those that have such cases, this might not work so well since this goes pretty close to the edge of the glass. It does leave about a .5mm around the edge. I personally would have liked it to go all the way to the edge but I don't know how that would effect the adhesion. None of my cases wrap around the edge of the glass so it never affected me at all.
Hope this helps someone.
Tip: When applying wet after washing with dish soap, try not to completly wash off the dish soap. A bit of dish soap remaining will help you with positioning the protector since it will allow you to slide it around a bit. Once you're in position, pressing down (especially around the home button, ear speaker and camera cut-outs) will hold it in place while you squeegy the remaining water out. I like to use my finger and roll it to push water out. Try not to slide you finger across the surface as it might catch and pull the protector out of position. Don't worry about air or water bubbles too much. They will slowly disappear over a few days.
https://goo.gl/photos/ztPVFEuUUCoPqJrZ7
https://goo.gl/photos/TRpAhb6a5gtFmp6r7
Thanks for those VERY complete tips, I shall follow your guidelines reapplying my TGSP!
Just curious how your solution is holding up. I just bought an S7 edge, so I'm in the market for a good screen protection solution. This sounds like a pain, but it also sounds like it may just be worth it!
TIA!
Hi,
I'm enhoying this device right now and I want to discuss the stock screen protector - it comes actually with two - for the small screen and for the large screen.
1) I'm not sure if I want to remove the protection of the small screen. The protector looks solid and I might to keep it on it.
2) The protection layer on the large display feels not that good as it is probably not a glass one? Samsung told that removing is possible (by samsung not by user!) but they dont recommend it. I dont like fingerprints and I dont like moving fingers on it (dont know proper english to describe it)
so anyone here who removed the protection layer on the large screen or the small screen?
Yeah, I like the idea of that screen protector... but man does it get fingerprints and grease on it. Makes it look terrible. I will hold off as long as I can but I think it will eventually come off.
I picked it off (from around the camera cutout) on day 1, no issues here. Screen feels much better (almost as good as regular glass phones), and it looks much cleaner.
Far easier to get the smudges off with a microfiber cloth now. I'm much happier with the screen protectors taken off!
Are you going to get another one?
I wonder if applying an olephobic coating to the installed protector would help at all?
The feel of the big screen protector is awkward, but I'd like to keep it on. It kinda feels like a self healing layer. Had a tiny dent in it but after a few hours it was gone...
Anyone else has the same experience?
I have removed the protector from the small screen in the day 2. I'm considering to remove the protection from the large screen because my fingerprints are all over it and I do not like the touch of this protector. The only thing I want to know (and I will wait) after a month of using someone who took it off if there is no big issues (of courtse I can live with some small scratches as maximum usability for this phone will be 2 years anyway)
I'm so tempted to take the inner protector off. Hate the "sticky" feel of it. Not smooth like glass.... Looks like it's a stretchy rubber like material. Hate to risk it though
Here is a link from someone who goes through the whole process of taking it off by samsung itself.
so I have decided to peel it off (simply grab it from the camera hole ) and it feels soooo much better and so much crisper. Lets see how long it will take to destroy the screen lol
~
So does the actual screen have an oleophobic coating?
Also does anyone know if this affects the 'discounted screen replacement in first year' benefit?
~
festr said:
so I have decided to peel it off (simply grab it from the camera hole ) and it feels soooo much better and so much crisper. Lets see how long it will take to destroy the screen lol
Click to expand...
Click to collapse
What's the status now? No scratches?
/CK
Café King said:
What's the status now? No scratches?
/CK
Click to expand...
Click to collapse
No scratches. When I have it open I'm careful to not drop it of course. I have the phone in pocket and I'm careful to not have it with any other things which would get in between the phone.
The feel of the screen is like you touch glass - no more sticky plastic cover nonsense.
I removed the inner screen protector:
1. It was easy (just used a piece of paper to lift protector near camera hole). Peeled off like any other protector.
2. It no longer feels like a sticky rubbery screen, it feels like glass.
3. Fingerprints are no longer the big issue. It obviously has an oleophobic coating.
4. Any fingerprints are removed far easier.
5. The screen does not feel fragile. Without any protection there's a possible risk it will scratch easier but as long as you avoid anything abrasive on your cloth or in your pocket etc I am confident it will be fine.
Incidentally, I think microfibre cloths that are too fluffy should be avoided as they trap fine particles of grit. I use the ultra fine ones, usually used for glass care.
~
after week of no inner protection - still no scratches and still the feeling is like pure glass experience. I did not need to clean the display besides getting rid of dust by very slightly using my cloth.
I had removed the protection by just using fingernail around the camera slowly peeling off the layer - you cannot do any damage if you are just careful and pulling it too fast for example. It is easier than it might look.
one week in is not a concern -- several weeks from now chime back in...
Can someone please show me how to install the Verizon outer screen protector? It looks incredibly complicated. Pulling Tab 1 and pressing halfway then pull tab 2 while pulling bottom yada yada yada. Jeez.