Teclast X98 Air 3G Tablet: 9.7" 2048x1536 px - Z3736F - 3G - Android/Windows 8.1
Hi to everyone,
I would like to apologize because my english is not so good.
This thread could be usefull for to get informations and modding istructions about the tablet Teclast X98 Air 3G.
I'm waiting for delivery via dhl and i guess some of the user here could think that the air 3G is an interesting tablet considering dimensions, cpu, display and the dual OS support .
I would like to point out that given the architecture and hardware of this tablet since the Teclast has released firmware for Android (standard) and Windows 8.1 (still in beta), even though I opened the thread in the Android tablet could be open also a thread in the Windows 8 section.
It was necessary to open a new thread because following the thread on the x98 Air teclast someone has mistakenly flashed a firmware dell'X98 air thinking it would go well on the X98 air 3G.
These are the hardware specifications:
Brand Name: Teclast
Teclast Model: X98 Air 3G
Processor Model: Intel Bay Trail-T Z3736F
Processor Main Frequency: Quad Core, 64-bit, 2.16GHz
GPU: Intel HD Graphics GEN7
Memory Capacity: 2Gb DDR3L
Tablet Data Capacity: 32GB
Screen Size: 9.7"
Display resolution: 2048X1536
Screen Technology : IPS Retina 10 Point touch Capacitive Screen
Dimensions : 240mmx169mmx7.4mm
Camera (Front): 2MP
Second Camera (Back): 5MP
Net Weight: 498g
Network Communiction: Built-in 3G,Bluetooth,Wifi
Extend Port: 3G External,Earphone Jack,OTG,TF card,Mini HDMI
Supporting Language: English,Russian,Spanish,Swedish,Portuguese,Turkish,Italian,German,Chinese,French,Japanese,Polish,Ukrainian,Greek,Hebrew
Other Feature: GPS, G Sensor,Phone Call
Operating System: Android 4.4
Cell Capacity: 8500mAh
OFFICIAL LINK
http://www.teclast.com/zhuanti/X98Air3GWin8/
SOME REVIEWS
http://mikecanex.wordpress.com/2014/09/18/teclast-x98-air-3g-gets-a-review/
http://translate.google.com/transla...s.imp3.net/thread-11183835-1-1.html&sandbox=1
http://bbs.teclast.com/thread-253051-1-1.html (you must be registered)
VIDEOS
Dual boot: www.youtube.com/watch?v=29dtAF39R9c
Dual boot conversion (with some usefull files): https://www.youtube.com/watch?v=qxpU_hFup64
Win 8.1: http://www.youtube.com/watch?v=Q3e_KTfbSK0
Win 8.1 - Multitasking and desktop mode: http://www.youtube.com/watch?feature=player_embedded&v=YHNki9ZBRgQ
Win 8.1 Gaming - Team Fortress 2:http://www.youtube.com/watch?feature=player_embedded&v=V8SpGjc3H4Y
Win 8.1 Gaming - Counter Strike Global Offensive: http://www.youtube.com/watch?v=rvwIxm2mCZw
Win 8.1 Gaming - Asphalt 8 (1366 x 768): http://www.youtube.com/watch?feature=player_embedded&v=qrJAGQ9iEYE
USEFUL TOOLS
VRoot : http://www.mgyun.com/vroot
VRoot chinese version (recommended) : http://d-h.st/lWu (Thanks to SUMMERBREEZE)
SRSroot: http://j.gs/4cyJ
Create ISO with driver : http://www.wincert.net/forum/files/file/5-win-toolkit/
Create bootable USB pen drive : http://rufus.akeo.ie/?locale=it_IT
REPOSITORIES WITH MANY THINGS (thanks to Frontiers and Hendrickson)
http://d-h.st/users/Frontier?fld_id=40727&s=file_size&d=DESC
http://techtablets.com/teclast-x98-air-3g/downloads/
BENCHMARKS
http://www.futuremark.com/hardware/mobile/Teclast+X98+Air+3G/review
OPEN A TECLAST TABLET (thanks to supercowz)
https://www.youtube.com/watch?v=841pMJC_QOk
ENGLISH REVIEW (thanks to Hendrickson)
techtablets.com review
ITALIANS REVIEW AND TUTORIALS (thanks to topdigamma.it)
Topdigamma.it Review
POSSIBILITIES FOR RECHARGE (thanks to cvfancypants)
Included Chinese Charger (TP-U25)- 5.0V/2.5A + Included USB cable
Belkin Boost Up (F8J040kr)- 5.0V/2.4A + Included USB cable
Samsung Charger (EP-TA11KWK)- 5.3V/2.0A (attached USB cable)
ANDROID DEVELOPMENT
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested for the model C6J6
ROOT INSTRUCTIONS WITH VROOT (thanks to zackman)
http://androidxda.com/download-vroot
VIDEOTUTORIAL VROOT USE
https://www.youtube.com/watch?v=cRgHZSnLmus
Note: someone has done the root through Vroot (english version) only after using Kingroot http://www.kingroot.net/
VIDEOTUTORIAL SRSROOT USE
https://www.youtube.com/watch?v=cRgHZSnLmus
FIRMWARE ANDROID
Teclast: http://dl.vmall.com/c0jpmqz7r5 (passw:C6J6)
Intel: https://01.org/android-ia/downloads
ADB DRIVER
https://mega.co.nz/#!3JshGCLB!6ldn4tPJZlZtDvlR17pmxhqxkrDs4OxxyCJhIHyhZ-4
http://www.koushikdutta.com/post/universal-adb-driver
FRONTIERS X98 TOOLBOX (for easy rooting)
https://www.oboom.com/MCY35B1Z
Just extract it and run "1_Toolbox.bat".
The rest is self explanatory.
If you have some difficulties you can follow these istructions: 25gee's tutorial
TOOLBOX WITH SU - updated to 2.43 - now root works without any problem if someone needs it
https://mega.co.nz/#!Mp50gIoD!ErMC5F...f9Qff_FQY0apcw
ALL THE APKS COMES IN /system/app STOCK ROM (thanks to migui88)
https://mega.co.nz/#!wYBixJaR!U6hO52KW0Wg_hy8OC8OBXP7ATmdpXmMWZNq9mHP2hMQ
ANDROID ROMS
CHINESE LITE 4.4.4 ROM (without bloatware and with lollipop keyboards)
https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
SUPERCOWZ X98 Air 3G (C8J7)-Android4.4.4-V2.00-1CF3.rar 556.1 Mb
https://mega.co.nz/#!zVdgWJyS!Vh7zGqX6NcYgXrCf-5v_qmEReZXuicvGzw6h1u5OnGo
jcespi2005 LIte ROM
v2.0 - C6J6 (Based on 2.01 Stock)
https://mega.co.nz/#!oQFU1CbR!NgwcEag4D1fuiVyS5qklyGq2wvMuPfwAwvHmFYzS4r4
v1.0 - C8J7 (Based on 2.02 Stock)
https://mega.co.nz/#!QY9kUQCI!hsPc8259qi0TmJhRmnc42inPEhFmpw-75fYxqrons6k
Description:
Fully rooted (Just launch SuperSU and update binary)
Deodexed
Zipaligned
Chinese Apps deleted (system should boot EN locale)
Nova Launcher as default Launcher (and the only one)
Google Play Fixed (integrated on System partition)
Audio fix by Frontier
Viper4Android
TeclastAutoUpdate (Just in case)
ES File Explorer
Three XML, one stock, one for 1Gb System, 128Mb Cache and 5Gb Data (for Dual Boot) and the other one to flash SYSTEM partition
mirek190 rom v3.1
v3.0 - C6J6
https://mega.co.nz/#!41IQHCDZ!g09l4U...A-30nY3DybSl2g
https://drive.google.com/file/d/0B8B...ew?usp=sharing
v3.1 - C8J7
https://mega.co.nz/#!8s4j0DZS!G6d9Ft...PI6fojDtwprLnM
https://drive.google.com/file/d/0B8B...ew?usp=sharing
v3.1 - C9J7
https://mega.co.nz/#!Yo4i0KJD!dnSXlt...jSH13iHvoHyc0o
https://drive.google.com/file/d/0B8B...ew?usp=sharing
Description:
ability to flash only system ( data and partitions are not touched ) or full flash.
system partition 1 GB instead of 1.5 GB -default but you can change it.
cache 100 MB instead of 1000 MB - is completely enough I tested but you can change it.
data partition 27 GB instead of 25 GB - I added other partition tables for data like 1 , 2, 3, 4, 5 ,6 ,7 ,8 ,9 , 10 GB , only android ( 27 GB ) , only windows 27 GB as well ) or default.
fully rooted
removed all Chinese programs
busy box
init.t
zip alignment
deodexed
changed navigation buttons to Android L looks
resided navigation bar
removed vol buttons and screenshot button from navigation bar - screenshot you can make pressing vol - and power at the same time.
battery with percent
bold fonts on system bar - fonts looks better
lower min brightens
microphone gain fix
clock on the middle of the status bar
4 way power menu - ability boot to droidboot, CWM, Hotboot
some changes in Buildprop for performance.
some optimizations in Framework but still very simple.
added. Google services, Google play, YouTube
google keyboard
adblock ( need root )
resolution changer ( need root )
ViPER4Android FX - need root now sound is really good and noisy
Apex launcher
and other things he don't remember
WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier)
Required materials:
- A Teclast X98 Air 3G (obviously), battery sufficiently charged (recommended to be fully charged the battery before starting the process). The tablet will be running Windows 8.1 or in FastBoot mode
- The Android DnX BIOS (or Android BIOS) from here
- Tin last available (this season) Android ROM for the X98 Air 3G: X98_Air3G_(C6J6)-Android4.4.2-V1.10.7z
-The tools of the platform upgrade Intel (Intel Manufacturing Tools). These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
Upgrade Preparation tool (Intel Manufacturing Tools)
- Unzip the computer you use to convert (not tablet), the Android ROM given above.
- Unzip one of the two available sets of tools Intel Manufacturing Tools. Inside the folder, you will find some executables that run in the following order and always with administrator privileges:
iSocUSB-Driver-Setup-xxxexe: At some point during the installation, you will know that you have to connect the X98 with USB cable to the computer to install the NAND drivers. H connection is necessary otherwise you can install to see and shape the NAND memory of tablet.
IntelAndroidDrvSetupx.xxexe: We run this installer as an administrator with the tablet plugged in USB. This will install the ADB driver Intel, which appears in the Device Manager (Device Manager) for Windows. (See the picture Figure_1)
ManufacturingFlashTool_Setup_x.xxexe: This tool is used in the final planning "name" (branding) of the tablet and install the fastboot kernel. Install with administrator rights on the proposed application folder (hold down the name of the file for the next step).
- Upon completion of the installation of the Intel Manufacturing Tool, copy the file "CUSTOM_CONFIG.INI" into the folder that the tool was installed (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
The function is said to be installed and functional guest running on X98 Air 3G, host.
Once the installation of the guest operating, it becomes host to the tablet and just run it.
Not supported - for now - the simultaneous execution of Android & Windows.
Remove the microSD card that you probably have the tablet, before initiation.
From Windows host -> Android guest (conversion to Android tablet)
- Unzip the Android DnX BIOS directly into the Windows installation on X98 Air 3G.
- Run with administrative rights (from command line) flash.bat file inside the folder BIOS_X98_Air_3G_android. H process starts with the completion of the installation DnX BIOS displays the message "FPT Operation Passed".
- Turn off the tablet holding the POWER button for 10 seconds.
- Run Intel Manufacturing Tool as administrator.
- On the tablet, hold the VOL +, VOL- and POWER until you see the logo of the Teclast. The tablet will be "stuck" there, is perfectly normal. Connect the tablet to the USB port on your computer, so you will receive the following message: "Entering DnX mode. Waiting for fastboot command..."
- In the Device Manager of Windows (Device Manager), find the Android ADB Interface and right-click -> Properties (Properties). In the window that appears, go to the Details (Details) and there in the drop-down menu choose the Hardware ID (Hardware IDs). Our interest rates VID and PID, as shown in the picture Figure_2.
Transfer the VID and PID values in the respective fields of Manufacturing Tool, section SoC Devices.
- Disables the tablet holding the POWER button for 10 seconds and disconnect the USB.
- We keep the tablet down the VOL- and POWER to enter the mode droidboot. Once this happens, connect the USB cable again, go to the Device Manager Windows (Device Manager) and - as before - we find the values of the PID & VID Android ADB Interface (values are different from the previous Figure_3
Transfer prices PID & VID Manufacturing Tool in their respective fields of unity "Android devices", so o Dialogue Manufacturing Tool will be something like shown in the picture. Press "Apply" and "OK" to save the parameters. Close the application.
- Disconnect the USB cable from the tablet and disable.
- Xanatrechoume the Intel Manufacturing Tool as managers and go to the menu File -> Open. There, choose the folder of ROM (X98_Air_3G_ (C6J6)), find the file "flash.xml" and open it.
- We keep the tablet down the VOL +, VOL- and POWER in order to display the logo of running Teclast DnX, connect the USB cable and Intel Manufacturing Tool begins the process of flashing Android ROM. Wait until the process is complete, disconnect the tablet from the USB and disable the X98 Air 3G.
The conversion process in Android tablet has been completed.
3D GAMES FREEZES FIX (thanks to Akitoyo and acc007)You can download the patch from here: patch for 3D games freezes
Then follow these steps:
1. Copy the update.zip to the root path of internal storage
2. Click OTA icon, then choose local update
3. Choose update.zip file then apply it, system will reboot automatically
4. There will be a new icon "Fastmode" on the desktop, choose it before launching large 3D games.
You must click it again if you reboot the tablet then play 3D games
If you haven't Teclast OTA app you can download it from here: Teclast update tool
If you want can find the apk attached to this post (fastmode.apk).
If you don't want use apk, use adb shell and then su to become root.Then launch these commands:
Code:
echo 400 >/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhz
echo 400 >/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_max_freq_mhz
If you want a persistent fix, also after reboot you can create new file install-recovery-2.sh file and put it in ./etc folder with these istructions:
Code:
#!/system/bin/sh
echo 400 >/sys/class/drm/card0/gt_min_freq_mhz
echo 400 >/sys/class/drm/card0/gt_max_freq_mhz
Remember remount /system as rw and chmod this neely created file to 755. You can then execute it or restart to have it automatically started.
For more detailed tutorial look here : jcespi2005's tutorial
GOOGLE PLAY STORE FIX (thanks to Frontier and Hendrickson)Anyone having issues with Google Play Store - this applies to both Air 3G with the latest 2.0.1 update (will post more information later) and Air II - please apply this fix.
Your OS should be rooted in order for this to work.
- Download the files from here.
- Follow this Hendrickson's Videotutorial
TECLAST X98 AIR 3G ANDROID KITKAT 4.4.4 ROM(OFFICIAL) v2.0.0 (thanks to Frontier)Download the upgrade from here.
You also need the Intel Manufacturing Tools (get them from here).
After installing this ROM upgrade, you need to apply the Google Play store fix (links and instructions just above).
The procedure to install this ROM is described above in this post. Just ignore the part that describes how to flash the Android BIOS to the tablet, as it is not needed in this case.
This upgrade will erase all data in the internal flash storage (32GB), so make sure you have a recent backup for your applications.
This ROM is OTA safe, after installation the Teclast Software Updater will notify you for an updated ROM; install the update (it's quite small) so the final ROM version would be v2.0.1_20141505 (see Teclast_X98_Air_3G_Android_4_4_4.png).
Visible changes:
- Intel Firmware Updater Tool inside the Android system; you can use it to flash .bin files directly to the tablet within Android (dual-boot system).
- Google Play Store enhancements; I can install applications now that I couldn't with 4.4.2 release (e.g Google+, Paypal and various e-Banking apps).
- A (little) faster boot.
MICROPHONE GAIN FIX FOR ANDROID 4.4.4 (thanks to Frontier)Here is the final version of the microphone gain fix.
Tests done:
- Voice recognition using Google Now and Google voice typing (even in Greek) works as good as on my OnePlus One with CM11s 44R
- GSM/3G voice calls are clear (I am using Wind GSM network) both with the built-in microphone and via Bluetooth headset (Samsung WEP210).
- Skype voice/video calls are clear, both with internal microphone and the Bluetooth headset.
Connect the tablet with USB cable to a PC with android debug bridge installed.
The tablet needs to have USB debugging enabled.
Open shell and cd to the location of new audio configuration file.
On a PC shell write:
adb root
adb remount
adb push AudioConfigurableDomains.xml /system/etc/parameter-framework/Settings/Audio
adb shell
In the adb shell write:
cd /system/etc/parameter-framework/Settings/Audio
chmod 644 AudioConfigurableDomains.xml
reboot
Done !
XPOSED ON 4.4.4 (thanks to majkel_94)Ok guys, thanks to @jcespi2005 for Xposed ASUS mod which steer me to the correct solution in xda topic for Xposed
So here it is:
Downolad Xposed Installer (2.6.1 has been tested, modules working ok), install it but don't launch the app or install framework.
Download Root Browser, install and open it.
In root browser:
go to the /data/data/de.robv.android.xposed.installer/ and create folder "conf" (permissions rwxrwxrwx)
in folder "conf" create the file "jit_reset_offset" (permissions rw-r--r--)
Download Terminal Emulator, install and open it. Then:
type "su"
type "echo 0x98 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset"
Reboot the tablet.
Open Xposed Installer, install framework, reboot.
Profit! You have working the latest Xposed and working KK Gravitybox!
Remember: You can disable xposed at boot by repeatedly pushing a hardware button as the tablet begins to boot. For example you can use Vol + button.
HOW TO UNPACK AND PACK framework-res.apk CORRECTLY (thanks to mirek190)Follow these instructions. mirek190's tutorial
ITALIAN TUTORIAL FOR UPDATE TO STOCK ROM FROM CUSTOM SELLER ROM (thanks to topdigamma.it)topdigamma.it Tutorial
DUAL BOOT FAQ + HARDWARE AND LOW LEVEL FIXING
FAQ
1)Q: While in Intel Manufacturing Tools and trying to flash, the progress bar is stuck at X%
The flash tool does not like funny characters ,should clear up some confusion as to why things aren't working.So before to flash please try removing the chinese characters from the file name. It screwed you up on something else having chinese in the name.
At 0%: Well, reconnect your device again, check your VID and PID values in settings, check if your drivers are properly installed, replace a cable if it is faulty, check that you're in DNX mode, basically, the flashing didn't even start.
If you have the right pid/vid from the device manager,unplug the device, close the app and restart it, select the flash.xml (should say ready to flash) then plug the device in while in DnX mode and it should begin.
At 5%: Mostly due to the fact that "Custom_config.ini" was not copied to the IMT directory, or there are some other programs that is blocking the progress, try changing a computer and flash again.
At 10 or 11%: Mostly due to wrong settings or parameters, check Device Manager in Windows for any missing drivers, check that the downloaded ROM is not damaged, or that the tablet is not already bricked. Also, this software is very sensitive to the USB port that it was first installed on, so try plugging it back to the same USB port that you plugged it during the install process. (Yes, you have to plug the device in during the install process, if you missed this out, uninstall all the drivers and redo the installation properly).Sometime help to try a different ROM, just to clarify you have copied the "custom_config" file to the Intel Manufacturer Tool folder right. It should get to 10% for about 5-10 seconds then make a disconnection sound and suddenly jump to 15% and continue.
At 89 or 90%: The files written at this stage are larger, so it might take a while longer, but if it is really stuck here, probably the USB cable is faulty. Replacing a cable and flashing again should solve the problem, or just simply leave the tablet and cables still (do not move them around) and try again.
If the flash freezes at 90% a solution could to be increase the timeout values in the program facturing flash tool.
At any other points: Might be due to faulty cables, or simply just try again!
2) Q: I flashed android bios, now I can not get in to droidboot mode by pressing Vol + and POWER. The tablet always gets into EFI shell command interface. I can only get to DnX mode by pressing VOL+ , VOL- and POWER. Any solutions?
A: Follow this steps valid for C6J6 and C8J7 model :
Open Intel manufacturing tools,then open file menu and go to the settings.
Put this value to SoC Devices: VID: 8087 PID:0A65
Put this value to Androird Device: VID: 8087 PID: 09EF
Click on apply and then on ok.
Disconnect the USB cable from the tablet and turn off your tablet (important)
Download the Android 4.4.4 ROM for C6J6 and C8J7 by supercows (link above)
Then in Intel Manufacturing Tool and go to the menu File -> Open. There, choose the folder of X98 Air 3G (C8J7.C6J6) lite 4Gb or 8GB and choice "flash.xml" for your device 4Gb or 8GB and open it.
Keep pressed VOL +, VOL- and POWER button until the tablet go to the dnx mode
Connect the USB cable and Intel Manufacturing Tool begins the process of flashing Android ROM.
Wait until the process is complete.
Disconnect the tablet from the USB and and turn off your tablet .
Connect the usb keyboard to the tablet and turn on your tablet, you could get shell command error again
Just type exit and you see the tablet go to the android version
When go to the android you must change your bios with ifwiupdate and you can flash dualboot bios or new android bios from first post
3) Q: I have problems getting into Android from the dual boot menu! Windows is okay.
A: If there are any problems getting into Android from the dual boot menu, change this option in the BIOS. Change "Boot Architecture" to "OS Boot Menu Only".
View attachment 3048901
4) Q: After shutting down the table in Windows, it takes very long before I can power it on again.
A: Turn off "Fast Startup" option in Windows Power Options. Another way is to navigate to "C:\Windows\System32", find "SlidetoShutDown.exe" and use that to shut down.
5) Q: The time in Android and Windows is not synchronised!
A: Go to "Run", type in "regedit", then navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation
Add in a new REG_DWORD, "RealTimeIsUniversal" and set its value to 1
6) Q: I plugged the tablet into the charger and it shows as charging but after a while I noticed that the battery percentage dropped!
A: Check the cable, it should be of good quality and as short as possible. Original teclast cable is good, not too long and thick enough. Best to use short cable of 5cm. This is due to high current and low voltage of the tablet.
7) Q: I'm on Android 4.4.2 and this tutorial needs me to upgrade to 4.4.4. How
A: Go to post #2, download the 4.4.4 ROM from there, start by following the tutorial from the line "WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier)" onwards all the way until you reach GOOGLE PLAY STORE FIX (thanks to Frontier). If you see the line "From Windows host -> Android guest (conversion to Android tablet)" in the tutorial, do not worry, because this process is used for both purposes, from Android to Android or Windows to Android, both are applicable.
8) Q: I flashed my tablet to dual boot OS already, but now I want to reinstall only one OS! How can I do it without having to reinstall everything?
A: If you want to reinstall Android only (leaving Windows unharmed):
One way is to flash just "system.img" through the Intel Manufacturing Tools (try this way first).
Download from here the zip named "ONLY FLASH system.img": http://1drv.ms/1s8dci8
Replace the "flash.xml" in your ROM folder with the one in this version.
Then flash as per normal using IMT.
This "flash.xml" will instruct the IMT to flash only the "system.img" file which is Android OS.
If that doesn't work, we will try flashing all components of the ROM without re-partitioning the whole eMMC,
Download from here the zip named "ONLY FLASH ANDROID PARTITIONS": http://1drv.ms/1s8dci8
Replace the "flash.xml" in your ROM folder with the one in this version.
Then flash as per normal using IMT.
If you want to reinstall Windows only (leaving Android unharmed):
Prepare your USB Drive with the Windows image.
Boot into Windows first, then restart and plug in the OTG cable, USB HUB, keyboard, and USB Drive.
Enter BIOS by pressing "ESC" key during boot and under the "Save and Exit" menu, scroll down to the "Boot Override" option, find the USB drive and select it to boot from it. The BIOS restart the tablet and will boot into the USB Drive so Windows install should start.
Remember the USB bootable stick must be created with Fat32 file system and GPT table partitioning.
9) Q: Help! My touchscreen is inverted!
A: (Thanks to @krisbliz):
Download the files from @krisbliz post here, and copy the files into C:\Windows
now run gpedit.msc
computer configuration
scripts (startup/shutdown)
startup
add
browse for reset driver.bat
10) Q: How to reinstall windows without reinstall android ? I cannot change the language and even updates from winddows update,every time when I put usb prepared and trying to install windows it working installation and after 65% shows installation error 0xc1440137 0x2000c and going back to previous instal (chinese) to windows
A: (Thanks to @mohamad_skiller):
Connect usb keyboard and usb windows instalition to your hub then
Enter BIOS by pressing "ESC" key during boot and under the "Save and Exit" menu, scroll down to the "Boot Override" option, find the USB drive and select it to boot from it.
The BIOS will boot into the USB Drive and Windows install should start.
11) Q: I have installed dualboot bios with a success. When I plug in usb to install the IntelAndroidDrvSetup1.5.0.exe, in the boot menu I can see a Windows in the right center of screen and in the right top corner two small icons of android and windows which I can check. I dont see Android logo in the center of screen?
A: (Thanks to @jcespi2005):
Sounds you install windows on top of android partitions.So check what partitions do you have in windows partition manager...If you deleted the android ones, you'll need to start over starting installing android again.
In any case, make sure you've followed these steps correctly:
blackman818's tutorial
12) Q: Why Microsoft Store doesnt work?
A: (Thanks to @Hendrickson ):
Run the troubleshooter (Search and type trouble shooter) And run it for the Store, this should re-install the drivers
13) Q: Why camera doesnt shows anything (the screen turns black and i have to exit to desktop)?
A: (Thanks to @Hendrickson ):
Reinstall the camera.inf and OV and GS camera drivers from the Air 3G drivers
14) Q: I can't use touchsceen and also screen rotation is not working. During installation , Windows stopped at language selection ,i had to connect usb moude and keyboard to make selection, is this normal?
A: (Thanks to @25gee ):
Yes,continue the installation and use drivers zip on the first page.Install the driver under gyroscope and run the registry file.Go into device manager,find the unknown device,install drivers and point manually to the drivers folder (it will install but fail to enable,this is normal) from here simply right click on the display,disable it and reenable, you can do the same with the 2 I/O devices for the orientation and accelerometer to fix the inverted screen rotation
15) Q: I partitioned my 32 GB SD card and formatted the smaller partition EXT4. Link2SD recognized the partition but it "fails to create MOUNT SCRIPT.
A: (Thanks to @kinhvanhoa ):
Probably you forgot to format your EXT4 partition on the SD CARD as "PRIMARY PARTITION."
Please make sure the EXT4 Partition which should be smaller than FAT32 partition, must be set as "PRIMARY" (FAT 32 as well).
Then, use LINK2SD on the Rooted Android, it works fine and allows apps to be moved to the EXT4 partition on the SD card.
16) Q: How can i change the intel turbo mode on to off? How can i enter in the bios mode? Only few games works, others freeze!.
A: (Thanks to @SUMMERBREEZE ):
Find an USB keyboard first and plug OTG cable to the tablet and turn it off. Turn the tablet on and immediately press ESC button. And follow the images (bios_1 and bios_2) i attached and do the settings carefuly. f4 save & exit
17) Q: I have problem with the dual boot bios, now I don't arrive any more to the page where there are the icons of the Android and Window (that I never saw it). Please could anybody known what happens, I am stacked on the installation of windows?
A: (Thanks to @grigoris_a ):
From switched off press power button once to boot and keep holding vol up key pressed
18) Q: I have installed dualboot bios with a success. The icon of windows is not showed,why?
A: (Thanks to @grigoris_a):
If you don't see windows icon it means the USB is not bootable.Try getting into bios and see if the USB drive is detected and check the file system on your windows usb drive it should be FAT32. Often the problem is inside the bios, maybe is enabled the options the EFI format on the boot option, disabled it the icon of windows appears and then you can started the installation.
18) Q: I start from Windows 8.1 then I installed the Dual Boot Bios (No problem).
I restart to the bios, power down the tablet and power up again and use the Windows 8.1 again (without reinstall anything) with 60hz. Everything perfect but... right now I cant install android because my tablet is not recognize by the PC I power off by pressing 10 seconds the power button. Then while its connected I power it up and shows the battery meter but the PC dont do anything so I cant use any program to flash android, any idea? I tried different cables and nothing
A: (Thanks to @Petepe10):
This is the normal way, do not know about dualboot though: Power up (vol up down power press) until screen shows dnx mode, and then connect cable. Flash starts automatically (provided pc is ready to flash of course)
19) Q: How to switch from an OS to another?
A: (Thanks to @BPM):
Power off the device and then press and hold vol+ and power until you see the bootmenu
20) Q: On the lockscreen in Windows the text in the lower right corner is chinese.
Sometimes there pops up chinese messages in the infobar (lower right corner in windows - left to the clock).How can i remove this?
A: (Thanks to @smartchip):
On Control panel : Clock, Language and Region : Language : Change date, time or number formats. On Formats tab - Match Windows display language (should be default). On Location tab - change "Home location" to get your Start Menu tiles to load news, recipes, etc from your country (open the apps when you're done and refresh). On Administrative tab - "Welcome screen and new user accounts" click "Copy settings", apply to all.
21) Q: I have teclast x98 air 3g dualboot version but accidentaly i touch in corner to swich off choosing the system, now i have only android.How ca I return to dual boot menu?
A: (Thanks to @smartchip):
Hold power + volume up to power on. You'll get the menu back
22) Q: On Windows is there any way to hibernate the tablet? I try to hibernate but doesnt works well,the tablets power off but you have to press power button for 10s to power it up again, and you start windows normally?
A: (Thanks to @seba2000):
Make a shortcut on your desktop to C:\Windows\System32\rundll32.exe PowrProf.dll, SetSuspendState Hibernate
and save it as "Hibernate" for instance.You can pin it to start as well.When you will run this shurtcut tablet will hibernate. Remember that after you will run this command (shortcut) you need to wait a bit before you will be able to switch on again (10-15 sec) . Do not try to switch on immediately - Windows needs time to dump all data from RAM to hard disk (need time to hibernate). In this tablet there is missing any led which show disk activity so you just need be patient.
After 10-15 sec you will be able to switch on by single power button press.
If you want add hibernate and sleep option in Windows, follow the vpx tutorial
23) Q:Why there is one hour difference between android and windows ?
A: (Thanks to @G3n3R4L):
Hit Start and type regedit.exe in the search box. Hit Enter and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\TimeZoneInformation. Right click anywhere in the right pane and hit New > DWORD (32-bit) Value. Name it RealTimeIsUniversal, then double click on it and give it a value of 1.
and done, time in windows is exactly the same as android under the correct time zone.
If you want to do these steps automatically you can use this reg file: abanglek's X98DualClockFix.zip
25) Q:Windows only reporting 1 battery cell, battery gets stuck at 7% for a few hours as mentioned previously here. Did anyone manage to fix the issue in Windows?
A: (Thanks to @grigoris_a):
1.Fully charge the tablet
2 Run cmd as admin and paste this command
powercfg-setdcvalueindex SCHEME_CURRENT SUB_BATTERY BATACTIONCRIT 0
3 Use the tablet until it shuts down
4 Charge the tablet without pushing power button until it charges fully.(let it overnight)
24) Q:Why I can't enter in fastboot mode?
A: (Thanks to @jcespi2005):
Just power off (press power off for 10 seconds), wait some time, 5 minutes, and press VOL+ VOL- and then power on until fastmode shows on the tablet. When you connect the tablet on fastmode, the Manufacturing tool just boot a droidmode image like this:
01/14/15 00:14:29.870 INFO : Port 0/0/4 #0: Booting droidboot image - SN : Baytrail00005B06
01/14/15 00:14:32.914 INFO : Port 0/0/4 #0: Booting to droidboot.img success - SN : Baytrail00005B06
25) Q: The brightness auto dimming up and down by itself. But This tablet no light sensor and cannot enable/disabled auto brightness.
A: (Thanks to @melvincz):
Go to the Intel Graphics settings utility (find it in the tray), choose Power section and disable all energy savings functionality. That will fix the auto-dimming issue.
That's all! ENJOY! If there are any questions feel free to post in the forum. Thanks!
HARDWARE AND LOW LEVEL FIXING
FLASH BIOS WITH THE USB PROGRAMMER AND CLIP (thanks to Hendrickson)
You can follow the tutorial here:
Russian Tutorial
The clip took a few goes to connect and it finally do when you hear the windows beep beep that new hardware is detected. Flashed and verified and boots fine. Windows 8.1 installed the drivers itself. You don't need to install them.
Some tips, I did it with the battery connected and fully charged. I used the 25xx slot on the usb programmer and the clip #1 is the colored cable of the 8. #1 on the clip to the . connector on the winbond chip itself.
Flashing took around a minute its quick.
DISPLAY BRIGHTNESS THROTTLING (thanks to Petepe10)
I think I found a way to prevent that the display is heavily dimmed due to a thermal event. It is in thermal_throttle_config.xml in system/etc. My interpretation is that by the mod below the brightness reduction is not immediately to 40 percent but goes down in steps to 80 60 40. Wouldn't you agree? I have not found the trigger settings yet though. The xml is editable (I use total commander), reboot afterwards. I will test some more. Of course such thermal mods are not without risk, so be warned..
Code:
<!--Cooling Devices-->
<ContributingDeviceInfo>
<CDeviceName>Display</CDeviceName>
<CDeviceID>1</CDeviceID>
<CDeviceClassPath>com.android.server.thermal.Brigh tnessControl</CDeviceClassPath>
<CDeviceThrottlePath>none</CDeviceThrottlePath>
<ThrottleValues>
<!--ThrottleNormal>100</ThrottleNormal-->
<!--ThrottleWarning>40</ThrottleWarning-->
<!--ThrottleAlert>40</ThrottleAlert-->
<!--ThrottleCritical>40</ThrottleCritical-->
<ThrottleNormal>100</ThrottleNormal>
<ThrottleWarning>80</ThrottleWarning>
<ThrottleAlert>60</ThrottleAlert>
<ThrottleCritical>40</ThrottleCritical>
</ThrottleValues>
</ContributingDeviceInfo>
FIX EMMC (thanks to stachoo777)
You can follow the tutorial here:
stachoo777 Tutorial
Be aware of broken droidboot mode when updating to newest ifwi bios for c6j6. One hint for this is that efi shell is like dos so if you want to go to USB just type "fs1:"
FIX PROBLEMS OF HEAT DISSIPATION (thanks to acc007)
acc007 Tutorial
FIX HEADSET PROBLEM(thanks to Hendrickson )
If with music, it sounds like it's being played through a tunnel, or been compressed down to something like 8kbps. The main instrument tracks usually sound fine, but the vocal track is heavily muted and in some tracks practically inaudible; it's also tinny and a bit distorted.
It's not defective, it's a Iphone style jack, if you don't fully insert your 3.5 plug it will sound normal. Or use a headphone without a mic or a converter like this one: http://www.ebay.com/itm/301385140519?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
WINDOWS DEVELOPMENT
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested for the model C6J6
WINDOWS 8.1 PRO ISO
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
WINDOWS 8.1 WITH BING (Teclast beta version - no driver nedeed)
https://drive.google.com/folderview...&usp=sharing&tid=0BzgIeN_XB6mlUmFieDdxa3JkUHc
WINDOWS 8.1 LANGUAGE PACK
https://social.technet.microsoft.co...uage-pack-for-windows-81?forum=w8itprogeneral
WINDOWS 8/8.1 TECLAST COMPONENTS DRIVER
https://mega.co.nz/#!tJdHCIAT!agSun8Wa1tOx_3tL8YMuS19j1i5wWG2WUJPprmTbTCs
ADB DRIVER
https://mega.co.nz/#!3JshGCLB!6ldn4tPJZlZtDvlR17pmxhqxkrDs4OxxyCJhIHyhZ-4
Note: The camera driver not work correctlly on Windows 8.1, after OS installation it's necessary to install ManyCam Pro to get a satisfactory use of the camera
ANDROID => WINDOWS 8.1 PROCEDURE (thanks to Frontier)
Required materials:
- A USB stick of 256MB (generally small), FAT32 configuration with label (label) WINPE (uppercase).
- A USB stick capacity of at least 8GB, formatted system NTFS. This will pass the installation files Windows 8.1.
- A USB hub to connect these two sticks in OTG cable X98 Air 3G. The hub would be good to have its own power supply.
- A Teclast X98 Air 3G (obviously), battery sufficiently charged (recommended to be fully charged the battery before you start the process).
Preparing USB sticks:
- Unzip the file WinPE_User_20140814.7z and copy all files directly on the root directory of the USB stick WINPE. See the picture Figure_1.
- Unzip the installation files for Windows 8.1 DVD into a folder named "images", which should be on the root directory of the USB stick of 8GB (with NTFS configuration). The Windows 8.1 version with Bing for X98 Air 3G is here (5 files total): Part1 , Part2 , Part3 , Part4 , Part5 . Inside the folder images, you need to have the files install.txt, install.wim, UnattendAudit.xml, UnattendUser.xml, WIMPART.TXT, Winre.wim. If you want to use your own image and make the USB stick with a tool (Rufus, etc), drivers for the Windows X98 Air 3G is here . If you use Rufus remember to use MBR for UEFI, not GPT!.
See the picture Figure_2
Preparation of material:
- X98 Air 3G enabled USB debugging in the settings.
- On the PC, will be available the tool adb (part of the platform SDK) and have installed the ADB drivers (adbdriver.com). The PC should recognize the X98 Air 3G before starting the procedure.
- It is recommended to install Intel Manufacturing Tools before turning the tablet on Windows tablet, in order to be able to restore it to operating condition if the procedure fails. These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
Upgrade Preparation tool (Intel Manufacturing Tools)
- Unzip the computer you use to convert (not tablet), the Android ROM given above.
- Unzip one of the two available sets of tools Intel Manufacturing Tools. Inside the folder, you will find some executables that run in the following order and always with administrator privileges:
iSocUSB-Driver-Setup-xxxexe: At some point during the installation, you will know that you have to connect the X98 with USB cable to the computer to install the NAND drivers. H connection is necessary otherwise you can install to see and shape the NAND memory of tablet.
IntelAndroidDrvSetupx.xxexe: We run this installer as an administrator with the tablet plugged in USB. This will install the ADB driver Intel, which appears in the Device Manager (Device Manager) for Windows.
ManufacturingFlashTool_Setup_x.xxexe: This tool is used in the final planning "name" (branding) of the tablet and install the fastboot kernel. Install with administrator rights on the proposed application folder (hold down the name of the file for the next step).
- Upon completion of the installation of the Intel Manufacturing Tool, copy the file "CUSTOM_CONFIG.INI" into the folder that the tool was installed (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
The function is said to be installed and the guest OS you are running on X98 Air 3G, host.
Once the installation of the guest operating, it is now host to the tablet and just run it.
Not supported - for now - the simultaneous execution of Android & Windows.
Remove the microSD card that you probably have the tablet, before initiation.
From Android host -> Windows guest (conversion to Windows tablet)
- Uncompress file BIOS_X98_Air_3G_android_to_windows.7z folder without spaces in the name (eg C: \ Temp). We should be inside the unzipped folder, a subfolder 'fpt-tools-package'.
- Connect the tablet to the PC and wait (in Windows) to recognize.
- If you have rooted your device,from a command prompt (with administrator rights), we give the following commands:
adb push c:\temp\fpt-tools-package data/local/tmp/
adb shell
cd data/local/tmp
chmod 0777 FPT
su
./FPT -F X98Air3G.bin
- If you have not rooted your device,from a command prompt (with administrator rights), we give the following commands:
adb push c:\temp\fpt-tools-package data/local/tmp/
adb root
adb shell
cd data/local/tmp
chmod 0777 FPT
./FPT -F X98Air3G.bin
- Once the execution of the last command and display the message "FPT Operation Passed", disable the tablet holding and hold POWER. See the picture Figure_3.
- Connect the two USB sticks in USB hub and the hub of the OTG port X98 Air 3G. Activating the X98 Air 3G with the POWER button, and automatically starts the installation process of Windows 8.1. The whole process takes a long time - and for this reason it is recommended that you fully charged the battery - and requires no user intervention. See the picture Figure_4.
If you do not automatically start the process, connect a USB keyboard to the hub, then reset the tablet (CTRL-ALT-DEL or off) and after doing reset, enter the UEFI BIOS by pressing DEL. At the boot menu, go to the Boot Override option and press ENTER on the USB stick (small in size) to do boot from there. See the picture Figure_5.
- When the message "WIMboot image deployment COMPLETE. Type EXIT from command prompt to restart or turn off the device." You can disconnect the USB hub and terminate the tablet. See the picture Figure_6.
The process of converting the X98 Air 3G in Windows tablet, complete!
After the Android to Windows conversion is it recommended first install the Gsensor, run the kxaccel-win8-x86-dbg-intel.exe that comes in the folder GSENSOR in the attached zip in and then execute the reg file.
Finally copy the TouchSetting.gt to C:\Windows\inf folder and reboot.
Everything should go smoothly now.
For the Italian friends I have prepared a simplified guide in Italian pdf.
CHINESE TOOL FOR CLEAN WINDOWS FOLDER AND FREE MORE SPACE (thanks to BoORDeL and keepfishes)
The zipped file is attached to this post (Windows_Cleaner.zip).
Execute the exe and click on button showed in Figure_7.
You will see a list of folder that can be cleaned (if this doesn't happen change permissions on your windows folder : http://tipsandtricksforum.com/thread-223.html )
Than select the checkbox near folders name and let the program clean them by pressing button as shown in the Figure_8
INVERTED CAMERA FIX (thanks to ro11er and Hendrickson)
You can downlad the fix from this url:
Inverted Camera FIX
You need to uninstall these three devices and reboot:
Kionix KXCJ9 Accelerometer SPB
Goodix Touch HID
Intel Graphics
Then after reboot install in this order from the attachment download in above link.
Intel Graphics
Goodix Touch
kxaccel-win8-x86-dbg-intel.exe and registry
Once registry entry is done and reboot monitor will be reversed. You must change registry to this value: 01 00 00 01 01 00 02
Very important: Do not do video drivers update or u will loose all your configuration!
UPDATED WIRELESS AND BLUETOOTH DRIVERS (thanks to Hendrickson)If you have problems with wireless when using bluetooth at the same time it was so damn slow, you can use updated bluetooth and Wireless drivers attached to this post ( Air_3G_Updated_WLAN_and_BT_drivers.zip).
These drivers were discovered November 4th from Dell site and seems to have fixed the issue.
TUTORIAL FOR DOWNLOAD WINDOWS METRO APP WITH IDM (thanks to mohamad_skiller)For read tutorial click here: Mohamad_skiller's tutorial
BATTERY PROBLEM FIX (thanks to puzdar )For read tutorial click here: puzdar's tutorial
HOW TO CHANGE LANGUAGE FROM CHINESE (thanks to Hendrickson )For see the tutorial click here: Hendrickson's tutorial
DUAL BOOT DEVELOPMENT
TUTORIAL VIDEOS
Hendrickson's complete Tutorial
This tutorial cover:
intel mfg tools installation
drivers
flashing
partitions
making a bootable usb drive
windows installation
windows drivers + fixes installation
DEMO VIDEOS
supercowz's Teclast X98 air 3G dual boot
UPGRADE FLOW PROCESS SCHEME(thanks to Petepe10)
upgrade flow process scheme
LAST BIOS
Be very carefull, you could brick your tablet if you use a version of bios not in conformity with your tablet model.I take absolutely no responsibility for damage caused by the flash of the following bios.
C9J8 ( Warning, the tablet could became instable with random rebooting and even if you turned it off you have to wait 2 min to power it again)
mirek190 modified C9J8 bios
AIR II DUAL (compatible with C6J6)
grigoris_a AIR II DUAL bios
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested on C6J6 only. For C8J7, there are some additional pointers along the way, do look out. All files in this tutorial are by default for C6J6, unless otherwise stated. Is highly recommend reading through the whole post first before touching your tablet to prevent errors, or worse, bricking the whole thing
Install dual boot(C6J6) - KEEPFISHES TUTORIAL (thanks to supercowz, mohamad_skiller, ro11er and Frontier)
Please before you begin to read this tutorial is better to watch the Hendrickson's complete Tutorial video that show and explain all the needed steps for dual boot implementation.
The original post of keepfishes is here. in case he make some updates and it is not shown in this post
I found that the tutorial on the first page lacked detail and some steps were not shown clearly, so I made a new one that I think is easier to follow for newcomers! Will add screenshots soon.
Dual boot BIOS benefits:
Fixes 60Hz refresh rate for Windows 32 bit system
Probably on old bios there are low voltage settings for GPU that makes some problems with 3D games,after updated to dual bios no problems at all for many users
Drawbacks:
BIOS settings very little
No boot menu (so no easy way to reinstall Windows with a USB drive)
Time in Windows will mess up when using dual OS
The flashing process is roughly as such:
Click image for larger version
View attachment 3050134
Many of us have different start points, some are coming from Android, some from Windows, but it does not matter. First thing is to flash with dual boot BIOS, which is most important.
WARNING: (Be very careful, this part may brick your device. After you get past here, you can practically do anything you want and there is almost no risk of bricking your device, so pay attention here!)
Get dual boot BIOS files here (both C6J6 and C8J7): http://pan.baidu.com/s/1sjK4Zbn
View attachment 3048864
Extract the BIOS "完美双系统BIOS.7z" and copy the contents to the tablet.
Note the filepath on the tablet, you will need it later.
1a) Flash BIOS from existing Android system
NOTE:
If your existing Android version is 4.4.4, you can use the "UpdateIFWI.apk" that was installed on the system to flash the BIOS.
If Android version is 4.4.2 on C6J6 and there is an "UpdateIFWI.apk" on it, there have been reports that it does not flash properly. (as reported by @ambrosio5)
Current advice is to update to 4.4.4 before proceeding. .For instructions on how to upgrade to 4.4.4 from other previous Android versions, see FAQ 7 below.
From the tablet itself, run “UpdateIFWI.apk”, select "Browser" and point it to the filepath of the BIOS named "X98Air3GDuala.bin''.
STOP: Make sure you have at least 50% battery and chose the correct file! If this fails, it might BRICK!
Now flash the BIOS.
1b) Flash BIOS from existing Windows system
From the tablet itself, RUN AS ADMIN the .bat file in the folder (the one with chinese words) provided.
View attachment 3048853
After you see the Green line “FPT Operation passed”, it’s good news.
Now reboot the system and you will be taken to the BIOS screen. Just igonore it and press power button for 10 seconds to turn it off.
2) Installing ANDROID first (must be done before Windows)
Now we need to FIRST install ANDROID. This step will wipe out your whole tablet (INCLUDING ALL PREVIOUS WINDOWS AND ANDROID PARTITIONS AND DATA)
ON ANOTHER PC (not tablet), download the Android 4.4.4 Lite ROM here: https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
OR
SUPERCOWZ ANDROID 4.4.4 C6J6 AND C7J8 ROM For Both: https://mega.co.nz/#!zVdgWJyS!Vh7zGqX6NcYgXrCf-5v_qmEReZXuicvGzw6h1u5OnGo
OR
USE ANY OTHER ROM YOU WISH
Download this modified "partition.tbl" file from the Chinese: http://pan.baidu.com/s/1qWnxc4G
Inside are two folders, the 5000 one is 5GB Android space, the 8000 one is 8GB Android space. I personally used 5GB, because I want to leave more space for Windows.
View attachment 3048857
Download and install Notepad++, we need to edit "partition.tbl" file below, the Notepad.exe and Wordpad.exe built in on Windows DOES NOT SAVE THE FILE CORRECTLY AND WILL NOT WORK!
Extract the contents of the ROM to a folder. You should see a "partition.tbl" file inside.
This file controls how the 32GB eMMC in the tablet will be partitioned in this step.
View attachment 3048867
Copy the "partition.tbl" file FROM the Chinese download (either 5000 or 8000) TO the Android ROM folder that you extracted. Replace the original "partition.tbl" file that came with the ROM.
Edit the "partition.tbl" file in the Android ROM folder, find the second last line, which is "add -b 5931048 -s 10240000 -t data -u 80868086-8086-8086-8086-000000000008 -l data -T 0 -P 0 /dev/block/mmcblk0"
and change the highlighted number to the value of user space you want in Android. The number is a multiple of 2048, so let's say if I want 500MB user space, I would have to multiply 500MB x 2048 = 1024000 and input "1024000".
View attachment 3048872
I tried 300MB but it was too small, I think 500MB would be good if you're planning to use more Windows. Save the file!
Credits to FRONTIER for Android ROM flashing instructions (I made a number of changes):
The tools of the platform upgrade Intel (Intel Manufacturing Tools). These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
- Unzip the downloaded Intel Manufacturing Tools. Inside the folder, you will find some executables. RUN THEM IN THE FOLLOWING ORDER WITH ADMIN RIGHTS:
iSocUSB-Driver-Setup-xxxexe: During the installation, DO NOT PLUG IN YOUR TABLET. Near the end of the install, there will be a text asking saying that you need to plug in tablet and power cycle to complete installation. ONLY PLUG IN YOUR TABLET THEN, and do as the instruction says. After you're done, click Finish. After install, you should see Intel SOC device in your device manager.
IntelAndroidDrvSetupx.xxexe: Plug in your tablet, and MAKE SURE that your computer RECOGNISES your tablet. You will see unknown ADB device if you plug in the tablet. Now run this program as ADMIN, this will install the ADB driver for the unknown device. In device manager, if it still shows unknown device after install, manually update the driver in device manager and browse to the install directory of the driver, it will then install the driver from there.
ManufacturingFlashTool_Setup_x.xxexe: Install with ADMIN rights, this will install the Flash tool with the Lightning icon, which is the GUI interface we use to flash our tablet.
Copy the file "CUSTOM_CONFIG.INI" from the downloaded folder into the install folder of IMT (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
Remove the microSD card from tablet.
Run Intel Manufacturing Tools (the one with Lightning icon), In the Settings menu, change the VID and PID values to this, then click apply and OK:
If you're using Windows XP, your VID and PID values may be different to the ones shown. Check the instructions on Post #2 on how to get the values.
View attachment 3051023
Close the IMT application and launch it again. Go to the menu File -> Open. There, choose the folder of ROM you want to flash, find the file "flash.xml" and open it. The "flash.xml" file which tells IMT how to flash the tablet's eMMC.
(IF YOU ARE USING SUPERCOWZ Android 4.4.4 C6J6 and C7J8 ROM, here are his instructions, :
flash with ManufacturingFlashTool
for C6J6 open in ManufacturingFlashTool :
flashC6J6-4GB.xml or flashC6J6-8GB.xml
for C8J7 open in ManufacturingFlashTool :
flashC8J7-4GB.xml or flashC8J7-8GB.xml
this last action dedicate 4 or 8 gb of rom space for Android and you can install windows in 18.5 or22.5 gb free rom space.
Then reinstall Android rom as before (open manufacture flash tools and select flash.xml)
After install android rom you can install windows as before (using bootable windows usb disk and select 18.5 or 22.5gb rom free))
-----------------------------------------------------------------------------------------------------------------
8) Turn off the tablet holding the POWER button for 10 seconds.
- Run Intel Manufacturing Tool as administrator.
- On the tablet, hold the VOL +, VOL- and POWER until you see the "Entering DnX mode. Waiting for fastboot command..."
Click image for larger version
View attachment 3048873
- Connect the USB cable to the computer and flashing will start.
- After progress bar is green and 100%, hold down power button for 10 seconds to turn off tablet.
If the progress bar turns red, take note of the percentage that it stopped at, and refer to FAQ 1 below.
Click image for larger version
View attachment 3048876
After finishing these steps, Android is now installed on the tablet, and if you power it up, you can see the dual boot menu with the Android logo.
Click image for larger version
View attachment 3048880
If you're happy with ANDROID only without Windows, you can stop here and just boot into Android! You can go on to do the Google play store fix and others...
3) Installing Windows
If you plug in your USB drive via the OTG cable and boot up, you will see the boot menu with an Android icon and a small Windows icon. (If you don't see the boot menu at all, shut down the tablet and press Vol + and Power button until the boot menu appears).
This small Windows icon is the only way to get the BIOS to boot into your USB drive to install Windows. This dual boot BIOS has no boot menu, and in the BIOS there is no option to select to boot from USB, so this is the only way to boot to a USB drive that I know of so far...
(If you already have a USB stick prepared, skip this section in BLUE)
Preparing your Windows USB Stick:
You can install Windows via the traditional method which involves the GUI (in which case you will need an OTG HUB to plug in the USB Drive and mouse together) OR you can use a downloaded wimboot image (no need for HUB and mouse, just a thumbdrive will do).
Whatever the case, make sure your USB Drive is formatted as FAT32! Very important!
I used this wimboot image that automatically uses WinPE to get through the whole install process automatically without needing a single mouse click, which also has all the drivers and everything installed and working properly:
Waiting for repost on mega...
Link: http://pan.baidu.com/s/1hqIfAle
password: zhec
Extract the downloaded files and then copy all the contents into the root of the USB Drive. NO NEED FOR RUFUS!
If you are not using the above images, and use other Windows ISO or images as found in Page 1 or if you want to make your own images, you will need this software RUFUS:https://rufus.akeo.ie/
Follow tutorial here on creating the USB Drive: http://www.techverse.net/how-to-create-bootable-usb-flash-drive-install-windows-8-1/
Remember to use MBR for UEFI, not GPT!
If your Windows doesn't come with drivers, you can download them from here and install them:
https://mega.co.nz/#!tJdHCIAT!agSun8Wa1tOx_3tL8YMuS19j1i5wWG2WUJPprmTbTCs
Here also a Windows 8.1 PRO version with drivers and English/French language pack (thanks to supercowz):
Win 8.1 PRO with driver and eng/fr language pack
Plug in the USB drive via OTG cable or HUB, and choose the small Windows icon until it turns blue, then hit the grey button below and Windows installation should start.
If it asks you for which partition to install to, you will see a great many partitions there (due to Android), don't worry, it is normal. Typically you will install Windows to the largest available partition. (Unless you set the Android user space partition in the "partition.tbl" file previously to be huge)
DO NOT TOUCH ANY OF THE ANDROID PARTITIONS, IT WILL DESTROY THE ANDROID SYSTEM!
Everything should go smoothly from here and you can remove your OTG cable and USB drive once Windows starts asking for your User Name.
4) Final Steps
One last step. Thanks to Android, we have to hide the Android partitions from Windows, because when we open "This PC", Windows will attempt to mount all the partitions and cause the whole thing to hang.
So, go to control panel, administrative tools, computer management, then Storage, then for each of the RAW partitions that belong to Android, right click and choose "change drive letters" and choose "remove", then OK. Repeat for the rest of the partitions, leaving the C: drive alone. DO NOT DELETE ANY PARTITIONS OR ANDROID WILL NOT WORK!
Note: For people who only want to install Windows and don't want Android but still want the dual boot BIOS (due to the 60Hz refresh rate), I have tried it and it works. What you need to do is to follow this tutorial exactly, but REPLACE STEP 2 WITH THE ONE BELOW:
STEP 2) This step will wipe out your whole tablet (INCLUDING ALL PREVIOUS WINDOWS AND ANDROID PARTITIONS AND DATA)
Yes, even though we are not installing Android, we need this step still:
ON ANOTHER PC (not tablet), download the Android 4.4.4 Lite ROM here: https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
OR
USE ANY OTHER DOWNLOADED ROM AS YOU WISH
Download this modified "partition.tbl" file from the Chinese: http://pan.baidu.com/s/1qWnxc4G
Download and install Notepad++, we need to edit "partition.tbl" file below, the Notepad.exe and Wordpad.exe built in on Windows DOES NOT SAVE THE FILE CORRECTLY AND WILL NOT WORK!
Extract the contents of the ROM to a folder. You should see a "partition.tbl" file inside.
This file controls how the 32GB eMMC in the tablet will be partitioned in this step.
Copy the "partition.tbl" file FROM the Chinese download from the 5000M folder TO the Android ROM folder that you extracted. Replace the original "partition.tbl" file that came with the ROM. Edit the "partition.tbl" file in the Android ROM folder, find the second last line, which is "add -b 5931048 -s 10240000 -t data -u 80868086-8086-8086-8086-000000000008 -l data -T 0 -P 0 /dev/block/mmcblk0"
and change the highlighted number to 2048. Save the file!
Open "flash.xml" with Notepad++.
DELETE this chunk:
<code_group name="system">
<file TYPE="system">
<name>system.img</name>
<version>eng.yankendi</version>
</file>
</code_group>
AND THIS CHUNK BELOW:
<command>
<string>fastboot flash system $system_file</string>
<timeout>420000</timeout>
<retry>2</retry>
<description>Flashing 'system' image.</description>
<mandatory>1</mandatory>
</command>
Then save the file.
Follow the post on the FIRST PAGE HERE, scroll down and start from this part onwards “WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier))” until the end (stop at "GOOGLE PLAY STORE FIX (thanks to Frontier)"). READ BELOW FIRST:
Because we have already done certain steps, we can ignore some parts:
PARTS TO IGNORE:
Under the "Required materials" section
IGNORE: “- The Android DnX BIOS (or Android BIOS) from here “
If you wish, you can use Android 4.4.4 lite ROM in place of the 4.4.2 ROM as proposed here.
Under the "From Windows host -> Android guest (conversion to Android tablet)" section
IGNORE all these: (because we have already flashed BIOS)
- Unzip the Android DnX BIOS directly into the Windows installation on X98 Air 3G.
- Run with administrative rights (from command line) flash.bat file inside the folder BIOS_X98_Air_3G_android. H process starts with the completion of the installation DnX BIOS displays the message "FPT Operation Passed".
After finishing the steps, you can power it up, you can see the dual boot menu option with the Android logo and a very small Windows icon. Continue and follow STEP 3 in the guide. You can partition your 32GB eMMC in the Windows setup to remove all previously created Android partitions and make it into one large Windows partition to install Windows.
For dual boot FAQ click here
INVERTED TOUCH FIX UNDER WINDOWS (thanks to krisbliz)
You can use the DevManView to restart the "Goodix Touch HID" before the windows logon screen and everything working perfect again.
Here are the steps:
Download the file "disable enable touch driver.rar" attached to this post
So first copy the extracted files in Windows dir
Now run gpedit.msc
Computer configuration
Scripts (startup/shutdown)
Startup
Add
browse for reset driver.bat
Then reboot to test.
SPACE PROBLEMS IN WINDOWS 8.1 AFTER WINDOWS UPDATE (thanks to jcespi2005)
Follow these istructions to clean WinSxS folder:
http://www.eightforums.com/tutorials/44351-winsxs-folder-component-store-clean-up-windows-8-1-a.html
SLEEP PROBLEM IN WINDOWS 8.1 (thanks to sasort)
Follow these istructions:
First open cmd as admin and check status with this command:
powercfg /sleepstudy
It should give you this reply:
No connected standby traces available. Report not generated.
Now start regedit an go here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Power
Change the value of the key CsEnabled from 1 to 0 and reboot.
(1 means connected standby enabled and 0 disabled.)
After reboot.
Now go to the control panel and select Energy, under Advanced there will be many new settings.
Don´t change anything, just select save settings.
Then with regedit change the CsEnabled key back to 1 and reboot again.
Open cmd as admin and again check status with the command:
powercfg /sleepstudy
It should now work and create a sleepstudy-report.html and the sleep function now works as expected.
MANAGE APP UNDER ANDROID (thanks to jcespi2005)
You can use link2sd to move app, libs and data, and FolderMount to link and move OBB and SD data to microSD
BATTERY DRAIN FIX UNDER WINDOWS (thanks to vpx)
The main problem is very old (year 2006) driver of "Intel SD Host Controller", they are 3 in Device manager. Only thing what you need is update driver.
start Computer Management (hold My Computer and select Manage)
select Device management
find SD Controllers, if you click on it, there are 3 "Intel SD Host Controller"s
hold on every one controller, select "Update Driver", select driver from computer, and there is another option "SDA Standard Compliant SD Host Controller", install driver, confirm restart of computer after last update install
reboot
WIFI FIX UNDER WINDOWS (thanks to Hendrickson)
If you see that ping on windows is very strange,sometimes i have lost packets and ping time is not stable try this fix: techtablets repository
BATTERY CALIBRATION FIX UNDER ANDROID (thanks to Hendrickson)
Try this, download and run advanced battery calibrator from Play and Battery Life repair:
Blackmart Studios - Battery riparator
Blackmart Studios - Advanced Battery Calibrator
This seems to have fixed the issue.
Maybe you should copy some post about Air 3G from X98 Air thread?
Nice english instructions for rooting, Win->Android, Android->Win, removal of bloatware etc. would be nice. Everyone can use google translate to navigate official chinese forums but you will get funny translations like "Brush Wizard software". If instructions are unclear and they leave space for interpretation mistakes can happen. Worst case scenario is bricked device.
After using windows and Android I still have the same gpu issues. I also looked in the log and at the end of every crashlog (in android) I see a dev_prive->gpu_error, which is a call from the kernel. (I saw some code on the internet about this) So, my intel Atom chip is bad. Going to return it and ask for a replacement.
The error seems to only happen when I use an app that uses opengl 3.0 (and a LOT of games use that!).
Also about the touchscreen, there seems to be a major problem with the driver in linux. Since I guess they cross-compiled the driver, I am guessing they made the same mistake in both android(linux) and windows.
How did I verify this? Well I used a goodix android application which had some demo app and I saw that the moments the touchscreen gets refreshed are not constant. Let me explain.
When I slide my finger over the touchscreen with a constant speed this happens to my tablets:
This is what my "old and smooth" tablet does(every dot is a touchscreen refresh): .---------.---------.---------.---------.---------.---------.---------.---------. (this is a constant refresh)
This is what my X98 Air 3G does: .--------.--.---------.-.-------.------.-------.-.-----.-----.-.-----.------.----.----.---------.-------.----. (not constant at all)
So the times the touchscreen gets refreshed is not constant. The result is that especially scrolling doesn't work that smooth.
And on top of that, the response time is extremely slow. I am guessing that the driver puts the touchscreen into sleep mode after every single touch, which is stupid. The response (as stated in the goodix GT9271 datasheet) is <200ms. Lets say it's about 100ms, do you know how slow that is??? If your mouse would only refresh every 10th of a second, it would be extremely slow!!!
If I didn't have gpu issues and the touchscreen issue would be corrected, this tablet would be superb, but that is not the case of course.
I am going to contact Teclast if they want my help in enhancing the touchscreen driver. (I am an embedded software engineer specialized in C/C++/C# code)
Also, I might be able to make simple C# app that does most of the work when you want to flash your tablet from android to windows. (this could also be done with a very simple windows batch script)
Jote said:
Everyone can use google translate to navigate official chinese forums but you will get funny translations like "Brush Wizard software". If instructions are unclear and they leave space for interpretation mistakes can happen. Worst case scenario is bricked device.
Click to expand...
Click to collapse
Hi Jote, sorry again for my bad english.
The biggest problem is that most of the information and instructions on how to root, how to change OS,etc.. come from the Chinese manufacturer's forum.
As written before your help in any way will be really appreciated! This is true also about the translation from chinese to the english language.
I ordered this tablet because I think it has enormous potential enclosed in a shell of very small dimensions, if we combine our knowledge to bridge the gap of the Chinese language I think we have great satisfaction with it.
I will try to add link to files for rooting, for change the OS and get other resources asap.
My tablet hasn't arrived yet but I tried to prepare everything.
I'm unable to browse the official forum. I've tried on several days but forums are just working extremely slow. When i try to browse directly through Google Translate I get "Proxy server to access restrictions ". I'll try again someday to find proper threads but right now i'm useless.
So the touch screen is going into sleep states very quickly? I noticed compared to the Onda v975w that it was much slower. I have the X98 3G air now and I have gotten use to it. But it would be nicer if it was how you pointed out.
I have disabled Allow the computer to turn off this device to save power, under power management on the Goodix Touch HID in device manager.
Jote said:
My tablet hasn't arrived yet but I tried to prepare everything.
I'm unable to browse the official forum. I've tried on several days but forums are just working extremely slow. When i try to browse directly through Google Translate I get "Proxy server to access restrictions ". I'll try again someday to find proper threads but right now i'm useless.
Click to expand...
Click to collapse
You have to use translator from bing/microsoft to translate threads from teclast forum at www .bing.com/translator/ (sorry, I'm not allowed to post links yet)
Hendrickson said:
So the touch screen is going into sleep states very quickly? I noticed compared to the Onda v975w that it was much slower. I have the X98 3G air now and I have gotten use to it. But it would be nicer if it was how you pointed out.
I have disabled Allow the computer to turn off this device to save power, under power management on the Goodix Touch HID in device manager.
Click to expand...
Click to collapse
Yes, that it what I am claiming right now based on the information I know and what I have experienced at this point.
I attached the zip containing the datasheet of the goodix GT9271 touchscreen controller. (it's the touchscreen controller inside our tablet if I can believe the log)
The zip also contains an android app from goodix. You can select demo in the menu and then test the touchscreen in various ways. Give it a try
Disabling the "Allow the computer to turn off this device to save power" isn't going to work I think. It can only be done in the driver and I am not sure if it's even supported. It's standard USB stuff, but the GT9271 is connected via I2C. This is a Inter-IC Connection to other chips (IC's) of smartphones/tablets like touchscreen controllers, temperature sensors, accelerometers, gyroscopes etc.
I use it a lot in embedded software engineering and I2C is a very common connection in embedded applications. USB is very heavy for small systems, but I2C does require "special code" to get it up and running.
This will give you a better idea of what an I2C connection is capable of(example of RK3288):
http://www.arctablet.com/blog/wp-content/uploads/2014/02/RK3288-2-nowrmk.jpg
Sorry for all the information
Edit: I contacted Teclast and said I'd like to offer them help for free. Let's hope they accept my free help. (if they are smart...)
Someone can check if is it true?
https://twitter.com/srsroot/status/522464839294550017
petruccig said:
Useful Tools
Root : http://www.mgyun.com/vroot
Click to expand...
Click to collapse
This link doesn't work ...
malojk said:
This link doesn't work ...
Click to expand...
Click to collapse
i uploaded the latest chinese version of vROOT for you and the others :good:
vRoot
http://d-h.st/lWu
With the help of a member of another forum, probably very soon we will have a detailed explanation of the steps for change the Operating System in a better english than mine .
Stay tuned.
petruccig said:
With the help of a member of another forum, probably very soon we will have a detailed explanation of the steps for change the Operating System in a better english than mine .
Stay tuned.
Click to expand...
Click to collapse
Which forum if I may ask?
LVL91 said:
Which forum if I may ask?
Click to expand...
Click to collapse
I've set-up an easy to follow guide (in Greek) for Android -> Windows flashing.
The link is here and the translated (in English) link is here.
The procedure of flashing from Windows -> Android is here (English translation is here).
Feel free to copy it and post it here in order to help others.
I have a question about the screen, namely, whether at you vertically (then best seen) is the difference between the left and right sides of the LCD to the distance from the frame (the black space)? In my left is approximately 2 mm and 1 mm from the right. Such a little thing but unobtrusive I hope you understand what I mean.
Next case. Has anyone tried to install on Android Xposed? For me, after the installation of almost every application resets the tablet .
How can I boost speaker volume in this tablet?
We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
IMPORTANT NOTE: For users who have NOT updated since version 2.0.307, all updates between 2.0.307 and 2.0.626 have been included. This is a critical update for the functions and usability of your Remix Mini. We strongly suggest you update to this version. This also means that this update may take a few minutes longer than regular updates.
__________________________________________________
Please continue to give us feedback here: http://support.jide.com/hc/en-us/requests/new
Thanks!
Do you have it as non ROM but as a firmware file to overwrite all partitions and have a fresh version of 2.0.626?
RemixOS_Jason said:
We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
IMPORTANT NOTE: For users who have NOT updated since version 2.0.307, all updates between 2.0.307 and 2.0.626 have been included. This is a critical update for the functions and usability of your Remix Mini. We strongly suggest you update to this version. This also means that this update may take a few minutes longer than regular updates.
__________________________________________________
Please continue to give us feedback here: http://support.jide.com/hc/en-us/requests/new
Thanks!
Click to expand...
Click to collapse
How to exit TV Mode without restarting?
RemixOS_Jason said:
We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
_______________________________________________
Click to expand...
Click to collapse
Can't find a way to close Tv Mode and back to normal desktop. How?
dinh_duy said:
Can't find a way to close Tv Mode and back to normal desktop. How?
Click to expand...
Click to collapse
press circle next to start button
kesmtk said:
press circle next to start button
Click to expand...
Click to collapse
Thanks. Gonna try it later.
Do you mean, you'd rather have a fresh copy of Remix OS on version 2.0.626 with none of your previous saved data and apps? Did you have your previous version rooted? I believe if you were just looking for a fresh start with the latest version of Remix OS, you can reboot your Mini, and then press F2 when prompted, and then do a factory reset. You may need to go through some updates, but I'm told you should restart in 2.0.626.
I hope this helps.
kesmtk said:
Do you have it as non ROM but as a firmware file to overwrite all partitions and have a fresh version of 2.0.626?
Click to expand...
Click to collapse
RM1C was rooted but unrooted cannot apply OTA
My device is RM1C. I Wanted to root on 2.0.512 version. but it autoupdated to some unstable version 2.0.622 with crashes after exiting fullscreen app. (I noticed there appeared an error messages on some missing file when connected via uart port. this is the message:
init: unknown magic init: unknown magic init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
) but 2.0.512 was most stable version for me no errors on the uart also.
I rooted 2.0.622 version and allowed an app that I bought "gamecontroller2touch pro" to grant superuser permissions. It works as mapping xbox360 controller buttons to touch games like a charm, where a jide keymap does not support xbox360 it only works for keyboard input.
Then I saw a version for RM1C 2.0.627 was dowloaded in autoupdater. I unrooted and made system partition as it was. but it detects that the system was accessed as R/W and OTA update aborts with error 7.
I just wonder if the new version will not have that error that makes crash the desktop after exiting from fullscreen(as I found workaround to reutn to desktop after crash is to click xbox360 "back " button ). I have the incremental OTA for RM1C version 2.0.627 on usb, but cant install it . need reflash system.img.
RemixOS_Jason said:
Do you mean, you'd rather have a fresh copy of Remix OS on version 2.0.626 with none of your previous saved data and apps? Did you have your previous version rooted? I believe if you were just looking for a fresh start with the latest version of Remix OS, you can reboot your Mini, and then press F2 when prompted, and then do a factory reset. You may need to go through some updates, but I'm told you should restart in 2.0.626.
I hope this helps.
Click to expand...
Click to collapse
Got it. I remember your issue. I'm trying to work out 2 solutions for you:
1. Downgrade as you asked for. I'm waiting for the Chinese ROM team to give me the package and tutorial to be translated.
2. Flashing the Global (English) ROM into your Mini.
Do you prefer either/or? I'll respond still in private message to you about this.
Thanks!
kesmtk said:
My device is RM1C. I Wanted to root on 2.0.512 version. but it autoupdated to some unstable version 2.0.622 with crashes after exiting fullscreen app. (I noticed there appeared an error messages on some missing file when connected via uart port. this is the message:
init: unknown magic init: unknown magic init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
) but 2.0.512 was most stable version for me no errors on the uart also.
I rooted 2.0.622 version and allowed an app that I bought "gamecontroller2touch pro" to grant superuser permissions. It works as mapping xbox360 controller buttons to touch games like a charm, where a jide keymap does not support xbox360 it only works for keyboard input.
Then I saw a version for RM1C 2.0.627 was dowloaded in autoupdater. I unrooted and made system partition as it was. but it detects that the system was accessed as R/W and OTA update aborts with error 7.
I just wonder if the new version will not have that error that makes crash the desktop after exiting from fullscreen(as I found workaround to reutn to desktop after crash is to click xbox360 "back " button ). I have the incremental OTA for RM1C version 2.0.627 on usb, but cant install it . need reflash system.img.
Click to expand...
Click to collapse
option 2 ; ) flash RM1C 2GB ram with RM1G firmware
..........option 2, I have pm'ed a message for you Thank You for help. :good:
RemixOS_Jason said:
Got it. I remember your issue. I'm trying to work out 2 solutions for you:
1. Downgrade as you asked for. I'm waiting for the Chinese ROM team to give me the package and tutorial to be translated.
2. Flashing the Global (English) ROM into your Mini.
Do you prefer either/or? I'll respond still in private message to you about this.
Thanks!
Click to expand...
Click to collapse
How and how long will this go on?
As a long time fan of Android-x86 I didn't really notice the Jide hardware until "The Merge"...
Now I see the Mini being sold off for half price and I wonder: Will it be obsolete on arrival?
I don't think I'd need Nougat on the device. I'd even think I'd be able to live with Lollipop.
But I can't operate a computer in my home network, that is unsafe to operate.
So I need the assurance that it will receive security updates until the end of its life cycle (3-5 years after purchase).
And I need the ability to control any computer I operate.
So will there be security updates until 2020?
Will you provide them or will you enable the community to provide them?
And will I be able to administer the system, de-activating services which have un-fixed vulnerabilities, blocking IPs, etc?
Generally that requires operating with root permissions on Linux systems, including those with an Android GUI.
$40 for a multi-media capable Linux systems running an attractive GUI is a great offer.
$40 for a potential IoT bot in my home network, which I can only throw away once somebody manages to subvert it, is a very bad investment, especially if it causes external damage.
So what will it be?
And will your future systems be any different?
BTW: Apart from 8 big desktops (Windows, Linux & Remix), 2 silent Atoms (Remix, Windows + Linux), 6 Notebooks (Windows, Remix & Linux), I operate 5 Android tablets and 10 Android phones (Canogenmod based Android, rooted by design).
Some of the PC hardware is 10 years old (3.4GHz Quad-Core Penryns work just fine with Nvidia GTX 1070), some of the Androids are still great after almost 6 years (e.g. Asus Eee Pad Transformer).
All of them run up-to-date operating systems with the latest patches. Typically not thanks to the vendor who produced the hardware but to the open source community which maintains Linux and Cyanogenmod.
If you treat the software on your hardware differently than Android-x86, you'll burn the brand very, very quickly.
usb boot
i have the remix mini rm1g with 626 is there a way to boot ubuntu via usb if i can boot into ubuntu can i install it and reinstall remix os on ubuntus root directory using grub customizer i know i can do that with remix os for pc
joeylikesubuntu said:
i have the remix mini rm1g with 626 is there a way to boot ubuntu via usb if i can boot into ubuntu can i install it and reinstall remix os on ubuntus root directory using grub customizer i know i can do that with remix os for pc
Click to expand...
Click to collapse
I don know, havent tried load linux on remix, I have rasbpberry pi and orange pi where they load everything from sd card.....remix mini loads from nand flash.
Maybe if you go to remix about screen and keep clicking build number to activate developer options.
Then dev options appear near about button in the options screen. Then enable usb debugging. select usb0 for debugging (the upper usb port)
install adb driver http://adbdriver.com/ . plug male - male usb cable PC-usb>remix upper usb port. Enter adb and enter root console. Maybe from root console it is possible to setup remix to load from sd card(where you linux kernel will be) by edidting uboot .
kesmtk said:
I don know, havent tried load linux on remix, I have rasbpberry pi and orange pi where they load everything from sd card.....remix mini loads from nand flash.
Maybe if you go to remix about screen and keep clicking build number to activate developer options.
Then dev options appear near about button in the options screen. Then enable usb debugging. select usb0 for debugging (the upper usb port)
install adb driver http://adbdriver.com/ . plug male - male usb cable PC-usb>remix upper usb port. Enter adb and enter root console. Maybe from root console it is possible to setup remix to load from sd card(where you linux kernel will be) by edidting uboot .
Click to expand...
Click to collapse
I don't think so. This is not a developer device, and not a traditional PC. It is a closed Android device (like Android phones and tablets), so would require custom bootloader/boot/etc. to loader other software. The Mini is made to show of Jide's bread and butter, their Remix OS software. They likely won't support officially installing any other 3rd party OS, since again, they are selling software and the hardware is incidental. Compared to the Raspberry Pi, which is open hardware designed for developing, and made to run various Linux releases and has broad support.
Now that it's EOL for the mini and no new updates are coming for it could we PLEASE have root?
4llerbuntu said:
Now that it's EOL for the mini and no new updates are coming for it could we PLEASE have root?
Click to expand...
Click to collapse
rooting easy, you must have uart to usb adapter. if you unscrew two screws under the rubber cover you will see 3 pins with GND tx and rx. Your usb to uart dongle shold have gnd tx and rx pins. 3,2 volt reading on the tx and gnd with multimeter. solder uart gnd pin to remix mini gnd. then uart tx to remix mini rx, and uart rx pin to remix mini tx. Open hyperterminal in windows. dial with com port setting 112500 none 8. and you have terminall root. from there you can cd to usb drive to install root
kesmtk said:
rooting easy, you must have uart to usb adapter. if you unscrew two screws under the rubber cover you will see 3 pins with GND tx and rx. Your usb to uart dongle shold have gnd tx and rx pins. 3,2 volt reading on the tx and gnd with multimeter. solder uart gnd pin to remix mini gnd. then uart tx to remix mini rx, and uart rx pin to remix mini tx. Open hyperterminal in windows. dial with com port setting 112500 none 8. and you have terminall root. from there you can cd to usb drive to install root
Click to expand...
Click to collapse
Looool:crying:
This is "easy"??
Seriously?
I always knew about this method. So there must be a reason I haven't tried it.
Anyways, id prefer rooting similar to what we have on numerous other Android devices, smartphones and TV boxes.
They usually don't require opening the device and a UART cable ......
re
4llerbuntu said:
Looool:crying:
This is "easy"??
Seriously?
I always knew about this method. So there must be a reason I haven't tried it.
Anyways, id prefer rooting similar to what we have on numerous other Android devices, smartphones and TV boxes.
They usually don't require opening the device and a UART cable ......
Click to expand...
Click to collapse
Well I had an old usb nokia adpter I tierd it appart and discoverd it has an uart interface with 3.2 volt communications sigal logic which is what is needed for remix mini. I soldered communications and boom I am as root user for remix mini . I copied supersu.zip and a instalation file from zip file inthe same foler. ran instalation file via sh command and root installed.
Maybe its possible to access root terminal from usb debugging.. I didnt try that.
You can install adb driver from adb.com. then click remix mini settings about. keep clicking version to get developer. enable developer. click settings menu again. click developer. click usb debuugging on. click usb0. then connect upper usb remix mini to pc usb. open pc cmd line and enter adb console. maybe from there you could do the stuff as root . I could
How do you install this? I'm currently on 2.0.203 and it says it fails trying to check for a new version. My internet is working fine though.
jbradshw said:
How do you install this? I'm currently on 2.0.203 and it says it fails trying to check for a new version. My internet is working fine though.
Click to expand...
Click to collapse
You must donwload phoenixsuit
https://www.dropbox.com/s/x7mnzui95c4459z/PhoenixSuit_EN_V1.0.8.msi?dl=0
adbdriver from
adbdriver.com
remix image
https://osdn.net/projects/remixos/downloads/66607/factory_image_rm1g_B2016110301-secure.img/
Warnining you will lose your all remix mini data.! games apps etc.
go to remix mini settings > abount. keep clicking on version number . the developer options will enable.
again go to settings>developer options > enable usb debuging , select usb0.
UNplug remix mini power cable.
Get a cliper and make a tool to push a "reset" button that is located in the hole in the back of remix mini. Try to for yourself by sticking cliper in the hole and feel the putton presses.
use usb MALE-MALE cable. connect remix mini upper usb port to laptop/PC usb.
I use windows 7 64bit
in laptop/PC:
1. Install the ADB tool
2. INstall PhoenixSuit. You will be guided through their installation instructions.
!let it autoupdate and restart it after updated
3. After the installation finishes, you can run PhoenixSuit by double-clicking the PhoenixSuit icon on the desktop.
4. Click ‘Firmware’ to enter the firmware flashing interface.
5. Click ‘Image’ to select the Remix OS img file.
!! click download one or multi partition to flash:
https://p5.zdusercontent.com/attach...Df0FXhMJxbcJLYkUku2_vQ.bLJYy1dgTWPhpfUCaIS3WA
6. Connect your Remix Mini to the PC via a USB-USB cable. NOTE: The cable must be plugged into the top USB port of remix mini.
7. Insert a straightened paperclip into the hole ar the back of your Remix Mini to press reset button.
8. while keeping clip inserted (reset button pushed) insert power cable to remix mini. Flashing image will start automatically, you can release the clicp holding reset button.
9. wait to complete, reboot mini.
Wow... what happened to the auto-update feature?
I am unable to mount the USB to my PC using after installing Android 4.4.4 on my Touchpad. Was able to do so with WebOS. How can I connect my Touchpad using a usb cable to my PC? PC is a Gateway Notebook running Windows 7 Starter version.
1sharpguy said:
I am unable to mount the USB to my PC using after installing Android 4.4.4 on my Touchpad. Was able to do so with WebOS. How can I connect my Touchpad using a usb cable to my PC? PC is a Gateway Notebook running Windows 7 Starter version.
Click to expand...
Click to collapse
Which rom and build of Android 4.4.4 are you currently using?
Try this:
Plug the tablet into the PC with the USB cable. Go to settings/storage/ click the 3 dots in the upper right/USB computer connection.
Switch from Media device to Camera, see if windows detects and installs drivers. Then set it back to media device.
Still no luck with mounting Touchpad
Hello Roland...
Thank you for your help and informative response. I am still unable to mount my device (Touchpad) to my PC (Windows 7). I have described below what I have tried to do so far.
Which rom and build of Android 4.4.4 are you currently using?
I used the downloads from [ROM GUIDE] How to Install Android 7.x.x Nougat builds on the HP TouchPad
734 posts
Thanks: 1,157
By RolandDeschain79, Recognized Contributor on 3rd December 2016, 06:30 PM
Download Android 4.4.4 Kitkat install files(Rom, Gapps, Recovery):
Rom:cm-11-20161219-NIGHTLY-MLQ-tenderloin.zip
Recovery:TWRP-jcs-dm-tenderloin-20140612b.zip
Gapps:gapps-444-base-20160602-1-signed.zip
After switching from Media Device (MTP) to Camera (PTP), Windows was able to detect my device (TouchPad) and install the drivers. Despite the information displayed in Android Settings for USB Connections (Camera (PTP) lets you transfer photos using software, and transfer any files computers don't support MTP), I was only able to transfer photos/pictures. When I switched back to Media Device (MTP) file transfer, Windows could not detect my device. Instead, when I looked in device manager, Windows sees my device as a Samsung Android phone (which I have) and not a Touchpad.
I have attached a screen shot of the driver files in the submenu Android Composite ADB Interface. I even ran and update. All files were current with latest updates. Thus, for some reason Windows is seeing my Touchpad as a Samsung Android phone and not a Touchpad.
Any suggestions? I am unable to transfer backed up files or upgrade to Naugot 7.1 without being able to mount device.
Thanks! Jay
1sharpguy said:
Hello Roland...
Thank you for your help and informative response. I am still unable to mount my device (Touchpad) to my PC (Windows 7). I have described below what I have tried to do so far.
Which rom and build of Android 4.4.4 are you currently using?
I used the downloads from [ROM GUIDE] How to Install Android 7.x.x Nougat builds on the HP TouchPad
734 posts
Thanks: 1,157
By RolandDeschain79, Recognized Contributor on 3rd December 2016, 06:30 PM
Download Android 4.4.4 Kitkat install files(Rom, Gapps, Recovery):
Rom:cm-11-20161219-NIGHTLY-MLQ-tenderloin.zip
Recovery:TWRP-jcs-dm-tenderloin-20140612b.zip
Gapps:gapps-444-base-20160602-1-signed.zip
After switching from Media Device (MTP) to Camera (PTP), Windows was able to detect my device (TouchPad) and install the drivers. Despite the information displayed in Android Settings for USB Connections (Camera (PTP) lets you transfer photos using software, and transfer any files computers don't support MTP), I was only able to transfer photos/pictures. When I switched back to Media Device (MTP) file transfer, Windows could not detect my device. Instead, when I looked in device manager, Windows sees my device as a Samsung Android phone (which I have) and not a Touchpad.
I have attached a screen shot of the driver files in the submenu Android Composite ADB Interface. I even ran and update. All files were current with latest updates. Thus, for some reason Windows is seeing my Touchpad as a Samsung Android phone and not a Touchpad.
Any suggestions? I am unable to transfer backed up files or upgrade to Naugot 7.1 without being able to mount device.
Thanks! Jay
Click to expand...
Click to collapse
Hi have you tried rebooting both the tablet and the PC, sometimes thats necessary. You might also try running the universal novacom installer again now that the tablet is detected here. I tested plugging in the tablet with the rom you're currently using on a virgin windows 10 setup and it worked fine, unfortunately I don't have a windows 7 system to test.
If nothing works you can always transfer the backed up files over the WiFi with a free app WiFi file transfer here
That should take care of your files if you're looking to upgrade with Nougat.
Hope this helps :fingers-crossed:
Yes...tried running Universal Novacom Installer a couple of different times without success (unable to USB mount Touchpad). Device Manager on PC allows me to uninstall Android Composite ADB Interface. Was thinking I might try that and see if I can get Windows to USB mount Touchpad and then search for compatible drivers. If that doesn't work, will try using Wifi Transfer as you suggest. Hopefully, that will get the Nougat files and backed up files transferred over to Touchpad.
Thank you for your help. Will post again when I know something more.
J
1sharpguy said:
Yes...tried running Universal Novacom Installer a couple of different times without success (unable to USB mount Touchpad). Device Manager on PC allows me to uninstall Android Composite ADB Interface. Was thinking I might try that and see if I can get Windows to USB mount Touchpad and then search for compatible drivers. If that doesn't work, will try using Wifi Transfer as you suggest. Hopefully, that will get the Nougat files and backed up files transferred over to Touchpad.
Thank you for your help. Will post again when I know something more.
J
Click to expand...
Click to collapse
No problem, I've got one more thing for you to try. Found this in an older post of mine from 2012, back when I was using windows 7. Give it a try, you can always use the WiFi transfer app but it might take a while to complete. Good luck:good:
Note: Windows users may need to do the following in order to attach the Touchpad with the USB cable.
1. Go into Device manager. You will see "MTP USB Device" under portable devices.
2. Right Click it and select update driver software
3. Select Browse my computer for driver software
4. Select Let me pick from a list of device drivers on my computer
5. Select USB Mass Storage Device then click next
Finally!! I was able to get Windows to install the MTP drivers using the method you proposed in your last reply. Took a bit of monkeying around with. Not exactly sure what I did, but it worked. Was able to transfer backed up files and Nougat files to Touchpad. Soooo...went through steps install Nougat. Everything seem to load fine. However, got an error message at boot for Evervolv and am unable to load Nougat. Error message is as follows...
Selected: 'boot Evervolv'
Loading '/boot/uImage.Evervolv'...Ok
Checking uImage...Invalid size
BOOT FAILED!
Press SELECT to continue
I presume what it means by press SELECT to continue is to press the home key. When I do so, it takes me into the boot menu moboot 0.3.8
boot TWRP
boot webOS
boot Evervolv
boot webOS Recovery
reboot
shutdown
When I try to boot again in Evervolv, I get the same error message over again.
What do you think?
Oh yeah (full disclosure)...one more thing. In step 10 of your Rom Guide it says "-Select the System partition and swipe to wipe." I did this, but repeated it four different times because I didn't realize I had to touch the little home icon at the bottom of the page to return to the install button on the main menu. Not sure whether it would have had any effect on the install, but the error was a invalid size of uImage so wondering if by swiping to wipe the system partition so many times that I messed something up. That was the only thing I did that was different from your video and Rom Guide.
1sharpguy said:
Finally!! I was able to get Windows to install the MTP drivers using the method you proposed in your last reply. Took a bit of monkeying around with. Not exactly sure what I did, but it worked. Was able to transfer backed up files and Nougat files to Touchpad. Soooo...went through steps install Nougat. Everything seem to load fine. However, got an error message at boot for Evervolv and am unable to load Nougat. Error message is as follows...
Selected: 'boot Evervolv'
Loading '/boot/uImage.Evervolv'...Ok
Checking uImage...Invalid size
BOOT FAILED!
Press SELECT to continue
I presume what it means by press SELECT to continue is to press the home key. When I do so, it takes me into the boot menu moboot 0.3.8
boot TWRP
boot webOS
boot Evervolv
boot webOS Recovery
reboot
shutdown
When I try to boot again in Evervolv, I get the same error message over again.
What do you think?
Click to expand...
Click to collapse
I'ts probably just a corrupt download, I've read this complaint before. Redownload the Nougat files and reinstall the recovery, rom and gapps.
1sharpguy said:
Oh yeah (full disclosure)...one more thing. In step 10 of your Rom Guide it says "-Select the System partition and swipe to wipe." I did this, but repeated it four different times because I didn't realize I had to touch the little home icon at the bottom of the page to return to the install button on the main menu. Not sure whether it would have had any effect on the install, but the error was a invalid size of uImage so wondering if by swiping to wipe the system partition so many times that I messed something up. That was the only thing I did that was different from your video and Rom Guide.
Click to expand...
Click to collapse
Wiping a blank partition won't hurt the tablet, its just a bad download. Right under swipe to wipe its says go back to main menu... I could add click the home button to return to the main menu, if you think that would help. This is why I have both a video and a written guide, I'd recommend using both resources simultaneously.
Edit: I double checked the video and I tell you to press the home button and return to the main menu here
10)Reboot into TWRP recovery 3.0.3.0, Flash the Android 7.1 Rom and Gapps
-Once in the new TWRP 3.0.3.0 go to the Wipe menu and select Advanced Wipe.
-Select the System partition and swipe to wipe.
-go back to the main menu and select Install, locate the download folder on the left menu
-select and install the 7.1 Rom and the Gapps package then reboot.
Note: The first boot to android 7.1 can take sometime, Wait for it...
That was it. Corrupt download. After downloading Nougat again and reinstalling, eventually Android 7.1 booted and is now loaded. Yeeees!!! The bad news is that Nougat on my device is very unstable and sloooow. I was more impressed with Android KitKat. If something doesn't change with 7.1, I will probably revert back to KitKat. After having gone through this exercise, I feel more empowered (confident) to make such changes. Although frustrating at times, succeeding in switching out WebOS for Android was a great learning experience and a big deal for me (I never do these kind of things). For someone with virtually no skills or experience in this kind of thing, it was well worth it to give it a go. I just hated the thought of seeing this TouchPad turn into a boat anchor. Couldn't have done it without you Roland. Your video and instructions (along with followup support to the forum) was invaluable. Although I am feeling nostalgic for WebOS (I really liked that operating system. Wish it had made it.), it has been fun to breath new life into these HP TouchPads with Android.
I'm sorry you seemed to misunderstand my point from my previous thread about repeatedly wiping the system files. I was not being critical of your video or instructions, but rather trying to give as much information to you and the forum to try and understand why I was unable to get Nougat to boot. You have done a great job with conveying the steps for loading Android on TouchPads. You deserve a huge :good: for your trouble. Thanks again for all your input and helping me get her sorted out. Good on ya mate!!
1sharpguy said:
That was it. Corrupt download. After downloading Nougat again and reinstalling, eventually Android 7.1 booted and is now loaded. Yeeees!!! The bad news is that Nougat on my device is very unstable and sloooow. I was more impressed with Android KitKat. If something doesn't change with 7.1, I will probably revert back to KitKat. After having gone through this exercise, I feel more empowered (confident) to make such changes. Although frustrating at times, succeeding in switching out WebOS for Android was a great learning experience and a big deal for me (I never do these kind of things). For someone with virtually no skills or experience in this kind of thing, it was well worth it to give it a go. I just hated the thought of seeing this TouchPad turn into a boat anchor. Couldn't have done it without you Roland. Your video and instructions (along with followup support to the forum) was invaluable. Although I am feeling nostalgic for WebOS (I really liked that operating system. Wish it had made it.), it has been fun to breath new life into these HP TouchPads with Android.
I'm sorry you seemed to misunderstand my point from my previous thread about repeatedly wiping the system files. I was not being critical of your video or instructions, but rather trying to give as much information to you and the forum to try and understand why I was unable to get Nougat to boot. You have done a great job with conveying the steps for loading Android on TouchPads. You deserve a huge :good: for your trouble. Thanks again for all your input and helping me get her sorted out. Good on ya mate!!
Click to expand...
Click to collapse
Congratulations are in order for getting this all done, i'm happy to hear the experience has empowered you with confidence and knowledge. I appreciate the feedback, my guide is aimed at users with little to no experience who just want to keep their HP TouchPad going.
No apology needed I just take my guides seriously and i'm always looking to improve them or fix mistakes. You'll see below I've added portions of this conversations to my troubleshooting section to help other users here. I'm just glad I didn't mess up that step in the video cause you can't fix those, a forum post is much easier to edit.
Nougat is still being worked on but as with any new version of android there will be bugs. Shumashs has an overclocked kernel that can boost the performance of the Evervolv nougat rom. However I highly recommend CM11 for users just looking for a stable and reliable setup. I'm happy we could save your tablet, enjoy it and check back sometime to see how Nougat is coming along.
Edits from my install guide:
Help I get this Error message after installing the Evervolv Nougat rom
Selected: 'boot Evervolv'
Loading '/boot/uImage.Evervolv'...Ok
Checking uImage...Invalid size
BOOT FAILED!
Press SELECT to continue
Solution
-You've downloaded a corrupt file, delete it and re-download the Nougat files.
-Repeat step 10 of the guide, flash the Rom and Gapps package from TWRP recovery.
Can't mount USB drive with CM11 and Windows 7
-Plug the HP TouchPad into your PC with the USB cable
-Go into Device manager. You will see "MTP USB Device" under portable devices.
-Right Click it and select update driver software
-Select Browse my computer for driver software
-Select Let me pick from a list of device drivers on my computer
-Select USB Mass Storage Device then click next to install the driver
10)Reboot into TWRP recovery 3.0.3.0, Flash the Android 7.1 Rom and Gapps
-Once in the new TWRP 3.0.3.0 go to the Wipe menu and select Advanced Wipe.
-Select the System partition and swipe to wipe.
-Click on the TWRP home button(bottom middle) to return to the main menu.
-Select Install, locate the download folder on the left menu.
-Select and install the 7.1 Rom and the Gapps package then reboot.
-After choosing to install the rom click the button to add additional zips, add the gapps package and put a check beside reboot when complete.
Note: The first boot to android 7.1 can take sometime, Wait for it...
Hi
Here we go again
Lets install Monterey on Unsupported Devices
Disclaimer
I am not responsible if things on your end go downhill
Only use this method if your MacBook is not up to par with Monterey specifications
Prerequisites
MacOS Monterey Bootable USB
16GB USB
( Look at my other posts if you do not have the "Bootable USB" )
SETUP
1. We need to download micropatcher from GitHub.. ( MicroPatcher Download )
2. Plug your boot-able MacOS Monterey USB Drive into the computer
3. Open up mac terminal and type sudo
4. Open up the micropatcher folder and drag and drop the ( Install-SetVars.sh ) file into the terminal and then you need to drag and drop the ( USB with Monterey boot drive ) on the desktop into the terminal and press enter key...
5. Once that finished, go back into the micropatcher folder, find ( Micropatcher.sh ) file, drag and drop into the terminal, and then drag and drop the USB on the desktop into the terminal again and press enter.
6. When that is finished, quit terminal and eject USB, and power off Mac.
Click to expand...
Click to collapse
INSTALLATION SECTION
7. Now we are ready to install, Plug USB into mac, power on, and hold option key while the computer boots up.
8. Select EFI Boot and press enter key... Your Mac will shut down, power on again and press option key again while booting
9. Now select Install MacOS 12 and press enter.
10. Select Language and press arrow key
11. Click on Disk Utility and press continue.
12. Click on view (top left) and select show all devices
13. Now select the drive you want Mac OS 12 to install to and erase with the following parameters
Name- Macintosh HD
Format- APFS
Scheme- GUID Partition Map
Erase and click on done, then close disk utility.
14. Click on Install MacOS 12 and continue... Continue with the installer... Select Macintosh HD and continue...
MacOS Monterey Is being Installed Your Mac will restart Several times
Once Installed, continue with the initial setup until you reach the home screen
15. Now you will need to change the USB Stick name to Install macOS Big Sur
16. Open terminal window and type sudo, then open up USB and drag and drop ( patch-kexts.sh ) file into the terminal, press enter key, and type your password.
17. Once this has finished inside the terminal, YOU HAVE TO RESTART YOUR MAC
Click to expand...
Click to collapse
We are done here
Till next time
Cheers
Really thanks!!!!
Gone try it as soon as I can and let you know how things went!
#mcl said:
Really thanks!!!!
Gone try it as soon as I can and let you know how things went!
Click to expand...
Click to collapse
Ok awesome. Just make sure you follow each step carefully
Ok, will be very careful
Hey!
Finally I decided to upgrade , and I am pretty happy for doing that. Even though I didn't expect this now animations are way faster, and Safari is so much faster. On big sur it lagged so much that I couldn't even use it.
However there is feature that I was hoping to be able to use but got unfortunately discover it just isn't available.
I would really like to have low power mode on my Mac, but it just doesn't appear any where in the OS.
What I found on the web is that it only works on early 2016 models and later.
Would it be possible for you to add a patch so they Mac thinks it's form 2016 so low power mode is available?
I think that way it should work but maybe you have a better idea...
Hey!
So I decided to install macOS Monterey on a 15" MacbookPro with dual graphics(in this case, I have the GT 750M).
I followed the other's guide you made and everything works great.
However as soon as I reboot into the USB, during the boot, the apple logo and progress bar glitches out and become tiny. This persists when I get into Monterey recovery everything is sill tiny.
Anyway I tried to continue and it seems to install the OS, however when it ends the installation, the boot screen never ends, it get stuck and I know the installation is complete because I can hear Macos voiceOver function, saying how to use if I need, but on screen I only see the loading bar and the apple logo. I tried restarting and nothing.
I also return to Big sur and then re do everything, got the same result.
Any help is welcome, and thanks in advance!
#mcl said:
Hey!
So I decided to install macOS Monterey on a 15" MacbookPro with dual graphics(in this case, I have the GT 750M).
I followed the other's guide you made and everything works great.
However as soon as I reboot into the USB, during the boot, the apple logo and progress bar glitches out and become tiny. This persists when I get into Monterey recovery everything is sill tiny.
Anyway I tried to continue and it seems to install the OS, however when it ends the installation, the boot screen never ends, it get stuck and I know the installation is complete because I can hear Macos voiceOver function, saying how to use if I need, but on screen I only see the loading bar and the apple logo. I tried restarting and nothing.
I also return to Big sur and then re do everything, got the same result.
Any help is welcome, and thanks in advance!
Click to expand...
Click to collapse
Well, I got to say I havent seen this happen before... its probably something to do with graphic divers compatability. I will do some research and see if I can find a fix for you.
Nameless Foe said:
Well, I got to say I havent seen this happen before... its probably something to do with graphic divers compatability. I will do some research and see if I can find a fix for you.
Click to expand...
Click to collapse
Ok thanks in advance for your time
#mcl said:
Ok thanks in advance for your time
Click to expand...
Click to collapse
No worries
Hey!
So finally the issue is finally fixed.
I tried to install Monterey using OpenCore legacy pacher and got the same result, however, it turns out I didn't see the warning when installing Monterey on this Mac(11,3). As it turns out when the installation is done you need to reboot in safe mode so the Mac don't use the Nvidia card.
Though, now with the latest version of OpenCore ( 0.4.7), it fixes that issue(on 0.4.6 you would have to reboot on safe mode).
Now when the installation is done it reboots it just and just works out of the box, and it automatically patches the system so you are able to use the Nvidia card without having to do extra steps.
So if anyone is interested in Installing Monterey on an unsupported Mac, visit their webpage, as everything is well documented, easy to follow and has an extensive list of supported devices.
Thanks for the news. When this guide was uploaded, this was the one of the earliest ways to get Monterey on unsupported devices