Database Develop

[ROM][6.0.1]MODest Rom☆Multi-DPI☆Stock-Modded☆CQL1☆(1/26/18)

MODEST ROM​
So, this is my rom. It's basically an all stock rom with some added features that, in my opinion, make for a much better overall experience than true stock. It comes with a custom kernel that is fully upstreamed for all the latest fixes and patches. If you like stock Note 4 look I don't think you'll find a better rom.
Features :
Flashpoint Kernel v3.1- Linux v.3.10.108 Thread Link
Rooted with Magisk v15.3
Busybox by osm0sis
Deodexed
Zip-aligned
Multi-DPI (Currently set at 560)
Private Mode Working
Safe volume removed
All apps multi-window
Brought back "once and always" buttons
Call record
5way reboot
6 in the Hotseat
TouchWiz swipe left
Toolbox enabled
Flashlight in QuickSettings Panel
Volume Up for flashlight- turn on in Settings/Display/Torch light
Tethering check disabled
1120 Fonts- Main Thread
Viper4android
There are a lot of thinks to give out, so here goes.
@topjohnwu
@carlosggb
@jovy23
@viper520
@SuperR.
@iBotPeaches
@nathanchance
@asc1977
@tdunham
@gharrington
@mariozawa
@Ticklefish
@osm0sis
@Kamy
@Alexandr
@BRoy_98
@1Xfan
@mhmdalsfaf
@supergrobi94
@dagrim1
@BeckPC
@Winb33
And for bringing root to the 910V. The following:
@beaups
@ryanbg
@Kingxteam
I really could go on and on. Everything I've learned is from members of XDA. Thank you to anyone who has taken the time to share their knowledge and if I've forgotten you just pm me and it will be corrected immediately.
ModestRom v11--- DOWNLOAD
If you've already upgraded your bootloader to CPD1 (MM 6.0.1) the only thing you need to upgrade is your modem. Using Odin, just place the modem file in the AP slot and boot your phone into download mode and flash.
CQL1 Modem Upgrade-- DOWNLOAD
Instructions
If you are on 5.1.1 you will need to upgrade your bootloader and reroot using this Guide.
If you have already upgraded to 6.0, unlocked your bootloader, and have TWRP installed, all you need to do is the following:
-Download the CQL1 modem upgrade to your pc
-Download the Rom to your internal or external sdcard
-Boot into recovery and factory reset your device
-Do not boot straight from recovery to download mode - download mode does not properly boot without doing the following
-Power off your device and pull your battery for 3-5 seconds (this will ensure that your device properly boots into download mode)
-Insert your battery and boot to download mode by holding vol. down + home button + power button at the same time
-Using Odin flash the CQL1 modem and once that completes, power off your device
-Now boot to recovery by holding vol. up + home button + power button
-Once you're in recovery go to advanced wipe and wipe everything but the internal and external sdcard (I always do this step twice)
-Then just go to install and flash the MODestRom zip file
-Boot time is about 7 to 10 minutes
-Enjoy!!
XDA:DevDB Information
MODest Rom, ROM for the Samsung Galaxy Note 4
Contributors
kevintm78
Source Code: https://github.com/kevintm78/Flashpoint_3
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: CQI2
Based On: TouchWiz
Version Information
Status: Stable
Current Stable Version: MODestRom v11
Stable Release Date: 2018-01-26
Created 2016-09-09
Last Updated 2018-01-26

Advanced/WiFi Calling Fix
This is how I got mine working; it's the same fix that @mharleston brought to light a while back.
Using any root explorer do the following:
-Go to /system/csc/ and find the sales_code.dat file
-Open with a text editor and change the VZW to TMB
-Save that file and reboot
-After the reboot go back to the same file and change it back to VZW and reboot again
Once it boots back up check in Settings and you should be able to access both the Advanced Calling and WiFi Calling
Flashpoint Kernel-most recent kernel
Link to kernel thread
How to Update Bootloader from CPD1 to CQI2
Link to post
MAGISK
Link to all things Magisk
Xposed-system-less v87.3_Updated for Magisk v18+
See this post
TWRP 3.2.2
TWRP 3.2.2 is now available! Here's the link The .tar file gets flashed in Odin (in the ap slot) and the image file can be flashed in recovery.
Theme's by @supergrobi94
Tons of different options.- and here's an example of my own personal favorite here.

☆☆Edge Panel for ModestRom v11☆☆
DOWNLOAD-This will change your Contacts app to the S6 version and the IncallUI app to the Note 7 version because the people stripe will not work with the N4 contacts.
☆☆3minit Battery Flashable for ModestRom v11☆☆
DOWNLOAD
☆☆3minit Battery-3minit Clock for ModestRom v11☆☆
DOWNLOAD
☆☆3minit Battery-3minit Clock-Gradient Statusbar for ModestRom v11☆☆
Download
☆☆Signature Spoofing for ModestRom v11☆☆
Link to info and Download
☆☆Older ModestRom Versions☆☆
DOWNLOADS
GRACE Apps
Grace_Contacts
GRACE_Email
GRACE_VoiceNotes
Grace_InCallUI
Other Apps
S7 S-Voice flashable zip - after you flash that you can update it with this app.
Modded YouTube app- allows background playback and no ads
Kernel Adiutor-mod- alternative app that has different options and may suit some people better
Device Check- a must have app. Will tell you nearly everything you need to know about your device.
Adaway app- another must have app. Imo this app greatly speeds up stock browser and Chrome
arkTube app-an app for downloading YouTube videos.
S7 Keyboard
TerrariumTV app- a great app to watch all your favorite shows and movies

Please post screenshot

RaipurBoy said:
Please post screenshot
Click to expand...
Click to collapse
Sorry about that, screenshots are up.

Does this work with 910t , if we use T-Mobile kernel ?

Manan79 said:
Does this work with 910t , if we use T-Mobile kernel ?
Click to expand...
Click to collapse
I'm not real sure. It seems like the v&t can both run on f&g models, so if i had to guess i think it can. But that's just a guess.

Hi! I'm very excited there's a new ROM for my N910V. Does Wifi/Advanced Calling work on this ROM?

shusuke028 said:
Hi! I'm very excited there's a new ROM for my N910V. Does Wifi/Advanced Calling work on this ROM?
Click to expand...
Click to collapse
Advanced calling works and wifi calling activates when you turn it on, but to be honest i haven't tried it to verify. Also just in case your wondering, visual voice mail works (it drives me crazy when I can't get vvm to activate on other roms.)

Good Job

how install this? use twrp? i apreciated you say the step instalation
this rom is rooted?

lesther70 said:
how install this? use twrp? i apreciated you say the step instalation
this rom is rooted?
Click to expand...
Click to collapse
Yes twrp. Just download the zip file, place on your external sd card, or internal if you don't plan on formatting data (although I would), and flash zip file. Also if you haven't already upgrade your modem to pf3, do that first. The link for that is here. The modem needs to be flashed through odin. I'll be sure to update the op to include instructions. Thanks for pointing that out.

kevintm78 said:
Yes twrp. Just download the zip file, place on your external sd card, or internal if you don't plan on formatting data (although I would), and flash zip file. Also if you haven't already upgrade your modem to pf3, do that first. The link for that is here. The modem needs to be flashed through odin. I'll be sure to update the op to include instructions. Thanks for pointing that out.
Click to expand...
Click to collapse
thanks friend

Cool rom, but why have 2 batteries enabled on boot? How can we uninstall minit if we prefer the stock batteries?

lev777 said:
Cool rom, but why have 2 batteries enabled on boot? How can we uninstall minit if we prefer the stock batteries?
Click to expand...
Click to collapse
There shouldn't be two batteries. Did you do a full wipe first? I'll post a version without 3minit mod since it basically requires a paid app to work.

I wiped everything except internal storage and SD card in twrp. Can you add screenshot option to power menu? Thx.
Sent from my SM-N920V using Tapatalk

lev777 said:
I wiped everything except internal storage and SD card in twrp. Can you add screenshot option to power menu? Thx.
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
I can certainly give it a shot . I'll have a copy of the systemUI without 3minit up in the morning, as soon as I can get to my computer. Also of you don't want the statusbar gradient you can go into the gradient app and push the slide bar under the color box all the way to the right. I circled the bar in screenshot.

Hopefully this rom is stable, and not a lot of bugs. I've flashed 4 different Roms in the past week or 2.
Sent from my SM-G935V using Tapatalk
---------- Post added at 03:54 PM ---------- Previous post was at 03:53 PM ----------
Is it recommended to flash a different kernel or is the kernel that's incorporated into this rom suffient?
Sent from my SM-G935V using Tapatalk
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
Were do I get the 3mint battery mod? Is this a TW rom or aosp
Sent from my SM-G935V using Tapatalk

mwebb34 said:
Hopefully this rom is stable, and not a lot of bugs. I've flashed 4 different Roms in the past week or 2.
Sent from my SM-G935V using Tapatalk
---------- Post added at 03:54 PM ---------- Previous post was at 03:53 PM ----------
Is it recommended to flash a different kernel or is the kernel that's incorporated into this rom suffient?
Sent from my SM-G935V using Tapatalk
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
Were do I get the 3mint battery mod? Is this a TW rom or aosp
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Yes it's very stable. I use my phone heavily for work and that was my kind of the reason I started down this path. If you want to wait a couple hours I'm going to post another version, with 3minit battery and one without. Also a couple more tweaks/mods. I'll update the op with more info as well.

kevintm78 said:
Yes it's very stable. I use my phone heavily for work and that was my kind of the reason I started down this path. If you want to wait a couple hours I'm going to post another version, with 3minit battery and one without. Also a couple more tweaks/mods. I'll update the op with more info as well.
Click to expand...
Click to collapse
Great,news brother!! I have a question it's probably been asked already but I have 2 battery icons the stock then the 3 mint.
Sent from my SM-N920V using Tapatalk
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
I factory reset then wiped data system cache and dalvik.
Sent from my SM-N920V using Tapatalk
---------- Post added at 05:34 PM ---------- Previous post was at 05:07 PM ----------
I flashed the modest rom about a hour ago. I gotta say man its great to see a rom that actually works the way it's supposed to work. No FCs or systemUI FCs or random reboots and WiFi works without having to enter my WiFi password everytime I reboot my device.
Sent from my SM-N920V using Tapatalk

[ROM] Customized A-ONE 8.0 - OPR1.170623.026 Jan 11/2018 [TWRP ROM]

Hi XDA friends.
This ROM was modified using latest official ROM released for betatesters group (January 10th 2017), and some days ago for all public under OTA feature.
Disclaimer :
Code:
Install at your own risk, only you are responsible for your device
The main features in this customized ROM are:
Root with Magisk
TWRP in-built
A/B TWRP installer zip with fast flashing time, about 50 seconds to finish.
Pico GApps
Centered clock with screen lock feature
Fingerprint unlock after a reboot without use pattern or PIN
Added MIUI main applications like Mi Remote, Mi File Explorer and Music
Third party app for reboot in recovery mode
Minor patches and tweaks
Installation method:
Reboot in TWRP
Do a factory reset (recommended)
Flash zip ROM
For TWRP boot instructions:
Follow Mi A1 TWRP thread
Download center:
A-One_tissot_8.1.10_v8.0_customized.zip
Credits:
Xiaomi
Google
@topjohnwu for Magisk root
TWRP team
Version Information
Status: stable
Current Stable Version: 8.1.10
Stable Release Date: 2018-01-10
Created: 2018-01-10
Last Updated: 2018-01-17

Reserved

Asuming is a Stock ROM with some tweaks, have you added, or think in add in some update, the Support for Camera2API?
I know it's just some code lines in the build.prop, but with this and the sideload of some GCam apk, everything gets better.

hello I flased and bootloop screen mi
EDIT, working flased , not working apk reboot to recovery edit root permisions in working apk reboot to recovery
thansk
regards

Thanks @JamFlux
Good work
i have flashed and also booted up will give review after 2 days

Hello it seems that drains a lot of battery when you use it
regards

Thanks for your work!
Any way to remove the top centered clock from lock screen? Or even to remove it at all?
Edit: actually, I'd rather remove that option and put the clock back to it's original location. Any idea how?
Thanks again.
Regards

Thanks @JamFlux. That sounds nice. Must try that asap.

can i flash with the twrp that u provided in your oreo beta modded rom earlier ??
---------- Post added at 12:49 AM ---------- Previous post was at 12:48 AM ----------
or both are same

aayush prinja said:
can i flash with the twrp that u provided in your oreo beta modded rom earlier ??
---------- Post added at 12:49 AM ---------- Previous post was at 12:48 AM ----------
or both are same
Click to expand...
Click to collapse
yes try with modded twrp
but both are not same

Passaralho said:
Thanks for your work!
Any way to remove the top centered clock from lock screen? Or even to remove it at all?
Edit: actually, I'd rather remove that option and put the clock back to it's original location. Any idea how?
Thanks again.
Regards
Click to expand...
Click to collapse
Sorry, the ROM is as is it. You can put the original systemui app, but you will lost a lot of features.

iron maiden said:
Hello it seems that drains a lot of battery when you use it
regards
Click to expand...
Click to collapse
Let the screenshots speak.
Make a full charge, then delete batterystasts.bin and reboot.

JamFlux said:
Let the screenshots speak.
Make a full charge, then delete batterystasts.bin and reboot.
Click to expand...
Click to collapse
Awesome!

JamFlux said:
Let the screenshots speak.
Make a full charge, then delete batterystasts.bin and reboot.
Click to expand...
Click to collapse
hello, ok thanks
regards

hmm i wipe cache/system/data after flashing now it reboot only to twrp what i did wrong?

Return the clock to the place.

lagging
camera is lagging like hell, front and rear both camera are lagging even while switching from one to another

People who had problems with video camera in the previous ROMs provided by @JamFlux, are you now capable of recording video in this ROM?

fida4011 said:
camera is lagging like hell, front and rear both camera are lagging even while switching from one to another
Click to expand...
Click to collapse
U have to flash one Magisk module for that... Magisk Permissive Script

Can I flash this ROM with FlashFire?

(guide)INSTALL Andriod P PR1 on REDMI 4

THIS IS NOT MY WORK , this is only for sharing purpose and to provide device specific guide.
ALL Rights goes to erfanoabdi, he is the real developer of this.https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
this ROM is ported from Android P-DP of Google Pixel XL (marlin) thanks to project treble
For review and installation video guide click here:
https://youtu.be/eV6W-t1QKp8
Requirements :
Qcom fully treblized device with 8.1 vendor
Redwolf recovery treble supported
Bugs Fixing :
important: mount vendor and system before flashing these files.
VoLTE fix(zip file):https://drive.google.com/open?id=14d5JJXMdJF6Gif0fWCwfSTAOIQjWrJt8
fingerprint fix(zip file) :https://drive.google.com/open?id=12ddmzZqCcLsdfYYQt21aLcrWPwLYsC5F
(on first boot after flashing fingerprint fix phone freezes, just reboot it again by pressing power button for 10 sec.)
wifi+bt fix:https://drive.google.com/open?id=1kpqAmquZuuliT97v7rnKm-2gE59x6Xv-
camera fix :https://drive.google.com/open?id=1eqJJhqm7z0_-vZbuMmmAXx8o9-6VPqxd
REMAINING BUGS:
WIFI and bluetooth cannot open at the same time.
Instructions : (you can also check video guide provided above)
1. download the latest 8.1 RR luis rom(treble).
2. Download latest andriod p gsi.img PR1 (A only) (this is a zip file you have to extract it to get .img file)
3. Download all the POST-sGSI(1,2,3) zips ,also download gsm.apk.
4. Reboot to recovery
5. flash RR luis rom 6.1 and wipe caches and data and reboot the rom.
6. now reboot in recovery mode.
7. click on install-- install image and select PsGSI.img (don't reboot)
8. Now Mount vendor in recovery
9. Flash POST-sGSI zips from 1 to 3 in priority
10. Reboot
On first boot your phone will give errors and it will be very laggy,,, do not panic.
install downloaded gsm.apk . it will fix errors and your rom will be super smooth.
DOWNLOADS:
RR luis rom v6.1(treble):http://luis-builds.de/downloads/lineageos/rr/Xiaomi_Redmi_4X_(santoni)/
Andriod p and post sGSI zips , incall.zip (total 4 files): https://androidfilehost.com/?w=files&flid=275999
(NOTE: downloaded pgsi img is a zip file you have to extract it to get .img file)
GSMCore apk :https://tinyurl.com/gmscore

good. guess we will see android P roms on our device after its officially released in a few months time.

No need to flash incall fix on our device

Can we disable the navbar?

Hi
Can we imagine some "P" custom roms we could flash directly, like other oreo/nougat roms ?

Flashing these system.img and other post gsi zips wont work on any other treble enabled rom ?

Angharad said:
Can we disable the navbar?
Click to expand...
Click to collapse
Yes, by adding line in buildprop
qemu.hw.mainkeys=1
---------- Post added at 03:39 AM ---------- Previous post was at 03:38 AM ----------
stevenlopes92 said:
Flashing these system.img and other post gsi zips wont work on any other treble enabled rom ?
Click to expand...
Click to collapse
What do you mean? I'm currently on this rom. This rom is great
---------- Post added at 03:41 AM ---------- Previous post was at 03:39 AM ----------
newbie_or_not_newbie said:
Hi
Can we imagine some "P" custom roms we could flash directly, like other oreo/nougat roms ?
Click to expand...
Click to collapse
Maybe u have to wait longer. Are you not familiat with treble?

its quite good rom for daily use if you will manage without VOLTE. Battery backup is decent and rom works as sooth as butter.

What do you mean? I'm currently on this rom. This rom is great
---------- Post added at 03:41 AM ---------- Previous post was at 03:39 AM ----------
Maybe u have to wait longer. Are you not familiat with treble?
Click to expand...
Click to collapse
Not so much... I see what it is, but can't realize what consequences for santoni, for custom roms.

newbie_or_not_newbie said:
Not so much... I see what it is, but can't realize what consequences for santoni, for custom roms.
Click to expand...
Click to collapse
If im correct, it means our devs have just to work on /vendor so we can flash gsi of ROMs that aren't built specific for santoni. Also updating hardware related things are completely independent of Rom Updates.

I understand more now, how difficult it is for devs.
Thanks for explanations.

Hey all i was saying is that now i am using treble enabled lineage os 15.1
Can i flash the system.img and other post gsi-zips above my base of lineage os , or is it mandatory to flash RR luis rom ?

stevenlopes92 said:
Hey all i was saying is that now i am using treble enabled lineage os 15.1
Can i flash the system.img and other post gsi-zips above my base of lineage os , or is it mandatory to flash RR luis rom ?
Click to expand...
Click to collapse
i got bootloops on my phone with lineage os15.1 vendor.
luis rom vendor works well with p gsi img.

i am using Los treble by swapnil bro, as base rom..
its working fine.. no issues at all..
dont neglect to keep Playstore apk ready after you boot, else it would be nuisance

Hi
the only problem that i have is that when i start Bluetooth, the wifi gets disabled and cannot stat until i stop BT

nandakis4 said:
i am using Los treble by swapnil bro, as base rom..
its working fine.. no issues at all..
dont neglect to keep Playstore apk ready after you boot, else it would be nuisance
Click to expand...
Click to collapse
Any calling problem bro?

anyone using as a daily driver?

MarcosJungbluth said:
anyone using as a daily driver?
Click to expand...
Click to collapse
Yup stable enough, some small bugs are there like cannot turn Bluetooth and WiFi on at the same time and YouTube seems to stutter.
Other than that everything works fine. Does heat up a little bit though.

I'm just trying DP4 and flashed all 3 zips after the GSI but the device doesn't sleep. Anyone else?
BT and WiFi at the same time isn't.possible, it seems.

meltbanana said:
I'm just trying DP4 and flashed all 3 zips after the GSI but the device doesn't sleep. Anyone else?
BT and WiFi at the same time isn't.possible, it seems.
Click to expand...
Click to collapse
disable ambient dispaly.

Lineage OS 16.0 (Android 9.0 Pie) For Redmi 4A (Rolex)

LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0(Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Broken:
Sepolicy is still permissive
Nothing else
Working:
Camera (and flashlight)
WiFi
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
VoLTE
Compatibility:
Compatible with all Xiaomi Redmi 4A and Redmi 5A variants (16GB / 32GB), other Redmi devices are not supported.
Builds are based off the Xiaomi's Android 7.1 firmware with proprietary blobs from MIUI 8.3.29 dev package.
Downloads:
LINK REMOVED BY MODERATOR
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery (Custom TWRP recovery for Redmi 4A - Direct link)
Format /system, /data and /cache
Install LineageOS zip package
Install Magisk 16.4 For root permission
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Credits & collaborations:
This work is due to efforts from RedmiDevs founding members that did the full device bring-up. Huge thanks to @tEaM Tentacles for all the help during that bring-up.
Finally, all RedmiDevs & LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Contributors:
Team Tentacles
ROM OS Version: 9.x.x
ROM Kernel: Linux 3.18.71
Version Information
Status: Beta

Anyone tried it yet?

Do I need treble enabler to use this?

Enter a pin to start Android!
What is the pin sir?

SHARING IS GOOD said:
Do I need treble enabler to use this?
Click to expand...
Click to collapse
Try wipe data and cache or maybe just a factory reset.

Marzuki_uki said:
Enter a pin to start Android!
What is the pin sir?
Click to expand...
Click to collapse
U need to format data in the wipe In twrp to fix it
---------- Post added at 01:16 PM ---------- Previous post was at 01:09 PM ----------
Thx developer for porting the backup of lineage is 16.1
But is very buggy all apps crash (even pixel setup)
So I could not able to enter the phone
I tried flashing with out gapps the phone booted up and opened
But all apps crash like gallery, fille explorer etc
The above one is of lineage is 16.0 back up
The carbon ROM backup also had the same type of problems but for the first time it did not even boot up
Plz developer fix these bugs
Would like to see the ROM fully functional in The near future
---------- Post added at 01:18 PM ---------- Previous post was at 01:16 PM ----------
SHARING IS GOOD said:
Do I need treble enabler to use this?
Click to expand...
Click to collapse
U can directly restore the backup using twrp
---------- Post added at 01:35 PM ---------- Previous post was at 01:18 PM ----------
MaxisMan said:
Anyone tried it yet?
Click to expand...
Click to collapse
Yup I tried it
Good but
Apps force close and force crash every time
If you flash gapps you can't even enter the phone
Because the pixel setup crashes

rseragon said:
U need to format data in the wipe In twrp to fix it
---------- Post added at 01:16 PM ---------- Previous post was at 01:09 PM ----------
Thx developer for porting the backup of lineage is 16.1
But is very buggy all apps crash (even pixel setup)
So I could not able to enter the phone
I tried flashing with out gapps the phone booted up and opened
But all apps crash like gallery, fille explorer etc
The above one is of lineage is 16.0 back up
The carbon ROM backup also had the same type of problems but for the first time it did not even boot up
Plz developer fix these bugs
Would like to see the ROM fully functional in The near future
---------- Post added at 01:18 PM ---------- Previous post was at 01:16 PM ----------
U can directly restore the backup using twrp
---------- Post added at 01:35 PM ---------- Previous post was at 01:18 PM ----------
Yup I tried it
Good but
Apps force close and force crash every time
If you flash gapps you can't even enter the phone
Because the pixel setup crashes
Click to expand...
Click to collapse
#
I did a full clean flash w formatting data. And still asking for pin.
And it says i entered a correct pin but " the data is corrupt, you need to reset ur phone ", i click the reset button and it reboot automatically. But after all that nothing happen, it still asking for a pin..

Marzuki_uki said:
#
I did a full clean flash w formatting data. And still asking for pin.
And it says i entered a correct pin but " the data is corrupt, you need to reset ur phone ", i click the reset button and it reboot automatically. But after all that nothing happen, it still asking for a pin..
Click to expand...
Click to collapse
Procedure to install the ROM
Prerequisites:-
unlocked boot loader and twrp(of course)
Download the back up files and extract it in sdcard twrp folder
Procedure
Remove the pattern or pin present in the current ROM
Reboot in twrp
Wipe everything you can except micro SD
Go to restore and restore the ROM
Install gapps 9.0 unofficial ( not recommended for now )
U cannot use this ROM as daily diver, currently as it has so many bugs

rseragon said:
U cannot use this ROM as daily diver, currently as it has so many bugs
Click to expand...
Click to collapse
Is it Gapps related bugs or rom related? In several unofficial Lineage 16 for other Redmi devices, most of the bugs are solved after the latest unofficial open gapps is released. 20th Aug build I believe.
Update: here it is https://builds.nezorfla.me/?dir=opengapps/pie/arm64/20180820

noowb00 said:
Is it Gapps related bugs or rom related? In several unofficial Lineage 16 for other Redmi devices, most of the bugs are solved after the latest unofficial open gapps is released. 20th Aug build I believe.
Update: here it is https://builds.nezorfla.me/?dir=opengapps/pie/arm64/20180820
Click to expand...
Click to collapse
I tried flashing with old gapps 20180811 version
When I tried booting into the phone pixel setup was not working and I could not enter in the phone
When I tried with out flashing gapps at first boot
The phone started and was good but all apps crash or force close
So practically if you want to know how android p will be u can use that for just seeing it
But currently you cant use it as daily driver

Nice port bro, good job <3

Please stop doing such misleading threads.
This is just a backup of an installation with treble + gsi, you didnt do anything here.
You didnt even edit the install instructions...

33bca said:
Please stop doing such misleading threads.
This is just a backup of an installation with treble + gsi, you didnt do anything here.
You didnt even edit the install instructions...
Click to expand...
Click to collapse
Yup I also thought like that it just had los boot animation and an edit of build.prop to make us like it is los even the wall paper is same

From the Moderator
People, OP
There are too many bugs , no git links and appears to be just a copy of others
So,
.............THREAD CLOSED...............
~~~ oka1

Dolby DIGITAL PLUS + VIPER4 WORKING ON MIUI 12 BASE Q-PIE

For New MIUI 12 PIE - Q
--------------------------------------------------------------------------------------------------------------------------------------------------
REFERENCE VIDEO FOR FINAL TEST ROM VERSION: https://dai.ly/x7qv8a8
----------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------------------​
Always, in my works (rom) MIUI, published on Xda, I have always used Dolby, in combination with other tweaks.
Listen to the sound, more full-bodied, being able to change the tones for my tastes.
All this was fluid up to Oreo.
With Pie I followed many tutorials here, but for me ineffective on MIUI stock or Xiaomi.eu (the one I use most).
There are more weekly releases rom, which I use this series of packages, with my procedure that I later illustrate with excellent results.
Dolby doesn't crash, even after setting changes. and is perfectly grafted with Viper. The most surprising thing is that the sound is more full-bodied.
For me, amazing compared to the previous configurations used in the previous Android versions rom,
which I previously used in my roms, from android 4.4.4 onwards ...
------------------------------------------------------------------------------------
I have tested this procedure on Redmi Note 5 Pro and Redmi Note 7.
I think it works well on other Xiaomi devices with the same Rom ...
-------------------------------------------------------------------------------------------------------------------------------------------------------
New MIUI 12 PIE - Q
I apologize.
The world has always tried to defend itself against major threats ...
Yet a small, invisible being has beaten very very hard ... in my country: Italy, all over the world.
In this months I have found solutions to make dolby digital plus + viper4 work,
on the latest MIUI 11 versions, but I have not published.
Everything seemed superficial to me.
Nonsense.
But now it seems that a great light is visible on the horizon ...
New installation for Miui 12
FROM VERSION 20.5.13 FOR LAVENDER (NOW UPDATED TO VERSION: 20.6.4)
FROM VERSION 20.5.14 FOR WHYRED (NOW UPDATED TO VERSION: 20.6.4)
In magisk version 20.4 - 20303 for LAVENDER and FOR WHYRED magisk vers. 20.4 - 20400:
add the 4 modules (numbered respecting the installation sequence)
They are 4 packages to be installed below
Restart only after installing them with Magisk.
- Also works in the latest miui 11 versions -
- the sound quality seems even more improved ..
- Fix now the problem that, after some listening time ...
both Dolby Digital Plus and Viper4 stop working, because they do not remain in the backgroud ... (Miui System forced closing)
---------------------------------------------------------------------------------------------------------------------------------------------------
OLD
PROCEDURE UNTIL MIUI 11 - 9.12.12 (OLD)
REQUIREMENTS:
4 PACKAGES Magisk- (I have sequentially numbered the packages for greater convenience for you)
FOR RN5: WARNING! I have tested the magisk version 20.2 (20200). Result: dolby app is not present in the system, although it appears in the magisk modules .... instead with the current version everything works well ....
***** Note *****
if you have problems installing the drivers with Viper4, and related root request, you must give all permission the Magisk application (lock screen - start in background). All this for the improved Miui system security.
Procedure OLD PIE :
- Install magisk
- in magisk / modules : install 1.0ViPER4Android_FX-v2.7.1.0.zip -
- do not restart -
- install 1.1Oreo-Pie_Dolby_Digital_Plus_v.6.1-_UNiTY__Light__by_repey6-20190315-zip -
- RESTART -
- Enter again in magisk / modules :
- and install 2.0jdsp_v2.1.zip (use the recommended default indications during installation)
- do not restart -
- install module 2.1Audio_Modification_Library-v2.4.zip
- restart -
open viper4 / give root permissions / install driver
restart!
enjoy!
--------------------------------------------------------------------------------------------------------------------------------------
PROCEDURE AND DOWNLOAD FROM VERSION 20.1.9 - ANDROID 10 (Q) (NEW) =
New Miui 11 Procedure - BASE Android 10 (Q) - dolby+viper4:
MAGISK 20.2 (20109) installed (always start with a clean boot.img)
busybox module always present in my modules ....
Procedure:
One session - no reboot
OPEN MAGISK/MODULES
Install in this sequence:
1.0ViPER4Android_FX-v2.7.1.0.zip
2Q_ICESound_Unity_Audio_Port-v8.2 - VERY IMPORTANT: in the installation choose configuration 2 - (practically new jdsp)
3Q-10_Dolby_Digital_Plus_v.6.8-_UNiTY__Light__by_repey6-20191212
4Q_Audio-modify-Library_v2.5
Reboot
open viper4 / give permissions / install drivers
automatic restart
reboot
reopen viper4 / reinstall driver
reboot
have fun with Miui 11 with Android 10 + Viper4 + Dolby base
-------------------------------------------------------------------------------------------------------------------------------------------
Currently Magisk 20.2 - (20109)= RN7 and 20.1 (20100) = RN5
My Current version rom: Xiaomi eu MIUI 11 - 20.1.21
It's nice to know, if this procedure works on other Device Xiaomi or Other Rom.
**************************************************************************************
This for me better configuration, as I published on the same rn5 thread.
Look at the end of the first post in op : https://forum.xda-developers.com/redmi-note-5-pro/how-to/dolby-digital-plus-viper4-miui-pie-rom-t3958081
Faq for noobs:
- If you want to have a good result, follow the instructions in Op-
- Before each installation of a new Miui rom version: first uninstall all Magisk modules / restart / complete uninstall Magisk
-After each installation of a new Miui rom installation: install the precise magisk version shown in the OP (will there be a reason?)
- Do not create a mess of various versions of magisk otherwise, you will only patch the kernel several times .... and DOLBY WILL NOT WORK FOR YOU !!!!! The ignorance of others is not the fault of the author .....
If you made the broth with magisk versions:
- Uninstall magisk
- Use you winrar or other .. and extract boot.img from the rom. copy the file to RN7. Restart in recovery select the boot.img file, after the target (boot)
restart in recovery select the magisk version recommended in OP.
- I noticed that often when installing magisk modules, using the miui file explorer something goes wrong ... I use MIXPLORER.APK
- My procedure was carried out using only the modules listed in OP. I don't know if other modules can create conflicts.
_ USE ONLY ORIGINAL KERNEL IF YOU WANT THAT DOLBY WORKS.
- You connect the brain to your hands to understand if Dolby is not working because of your inexperience or because of the author.
SMALL NOTES:
Obviously, as I wrote above, the perfectly working test was carried out using MIUI 11 VERSION 20.1.9 ONLY
Obviously we are talking about the Miui system with Android Q base-
This does not mean that it works with other Android Q roms or others !!!!
My system is stock Xiaomi.eu. Original kernel!
Please when you post a problem, to specify which rom you have installed and version. In addition to the version of Magisk.
Even more 'writing: it does not work for me ..... and have a device other than RN7 or RN5, where I published the reference thread!
Because it makes no sense to post: it doesn't work for me ..... without mentioning the type of rom version, and magisk version. This procedure works perfectly under the conditions written above. It would make no sense for me to publish without being convinced that everything works.
***************************************************************************************
If my work is useful to you, pressing the thanks button is welcome to me.
All credits to package creators.

Can explain to me why are they using so many sound mods at the same time? They all have too many similarities to me, i just use v4a and it's fantastic compared to stock or audiofx. But I'm not exactly an expert of sound modding.

AOSP roms
Would this work in AOSP roms?
Im on Pixel Experience and i´ll like to give it a try

A bit same this video.

after all installed and some pictures taken in HDR + mode the same crashed. I can only take pictures in HDR mode. I tried installing before with xiaomi.eu + evira 4.x and my rn7 no opened no cell phone camera. So I went to try with xiaomi.eu beta 9.8.15 + all the mods described and the HDR + mode stopped working, any solution? Sorry for my bad english. Google translator.
---------- Post added at 01:03 PM ---------- Previous post was at 12:58 PM ----------
guerrawill2 said:
after all installed and some pictures taken in HDR + mode the same crashed. I can only take pictures in HDR mode. I tried installing before with xiaomi.eu + evira 4.x and my rn7 no opened no cell phone camera. So I went to try with xiaomi.eu beta 9.8.15 + all the mods described and the HDR + mode stopped working, any solution? Sorry for my bad english. Google translator.
Click to expand...
Click to collapse
I have already cleared the system cache and it has not been resolved.

guerrawill2 said:
after all installed and some pictures taken in HDR + mode the same crashed. I can only take pictures in HDR mode. I tried installing before with xiaomi.eu + evira 4.x and my rn7 no opened no cell phone camera. So I went to try with xiaomi.eu beta 9.8.15 + all the mods described and the HDR + mode stopped working, any solution? Sorry for my bad english. Google translator.
---------- Post added at 01:03 PM ---------- Previous post was at 12:58 PM ----------
I have already cleared the system cache and it has not been resolved.
Click to expand...
Click to collapse
How is this related to sound mod thread?

sonrics1993 said:
How is this related to sound mod thread?
Click to expand...
Click to collapse
Was after having installed all this, but after many tests, I realized that it starts to fail after doing a dirty installation of the ROM, I did a dirty installation with the xiaomi.eu, an error of mine, the conflict is not only with these modules, it is with everyone I tested. sorry.

I apologize for not having responded immediately to your comments. it's not part of me. Unfortunately last Saturday, due to the breaking of a water pipe, the whole house where I lived was flooded. I didn't have electricity then.
guerrawill2 said:
Was after having installed all this, but after many tests, I realized that it starts to fail after doing a dirty installation of the ROM, I did a dirty installation with the xiaomi.eu, an error of mine, the conflict is not only with these modules, it is with everyone I tested. sorry.
Click to expand...
Click to collapse
guerrawill2 said:
after all installed and some pictures taken in HDR + mode the same crashed. I can only take pictures in HDR mode. I tried installing before with xiaomi.eu + evira 4.x and my rn7 no opened no cell phone camera. So I went to try with xiaomi.eu beta 9.8.15 + all the mods described and the HDR + mode stopped working, any solution? Sorry for my bad english. Google translator.
---------- Post added at 01:03 PM ---------- Previous post was at 12:58 PM ----------
I have already cleared the system cache and it has not been resolved.
Click to expand...
Click to collapse
As already said, my house was flooded! but I'm sure it wasn't my package's fault here on xda! I've never had any problems, I never found influences between this tweaks and the software part of the camera .... in fact HDR has always worked for me.
p.s. and really strange that on 450 downloads (up to now) of this packages on average, you only have this problem. Did you think this before publishing here? -
Besides that, to be sure that everything was ok, I tested these packages for, many weekly releases, BEFORE I publish here..... I said the first thread :highfive:
kauw5164 said:
A bit same this video.
Click to expand...
Click to collapse
a bit same ???? I haven't tried these packages on video and don't know if it works in the latest Pie Miui versions,. BUT I had already written in the first thread that I had already tried other packages, also here on XDA - But it just didn't work! You simply had to read my thread. The question I ask myself is why are there hunters looking for the evil of others ????
p.s. Roughly from what I read in the video preview (I don't remember the sequence), these are the packages I used! but with Oreo! In fact, they didn't work with Pie for me
Tatoh said:
Can explain to me why are they using so many sound mods at the same time? They all have too many similarities to me, i just use v4a and it's fantastic compared to stock or audiofx. But I'm not exactly an expert of sound modding.
Click to expand...
Click to collapse
simply because I use dolby to increase the emphasis of the sound. in fact I leave viper4, in default sound gain. Viper4 I only use instead for frequency cuts, and surround ..
----------
Sorry for my bad English.

Thank u so much

oregon69 said:
simply because I use dolby to increase the emphasis of the sound. in fact I leave viper4, in default sound gain. Viper4 I only use instead for frequency cuts, and surround
Click to expand...
Click to collapse
Dolby doesn't work on my RN7 running MIUI.eu 9.8.22. JamesDSP and Viper work ok (with stuttering on the first second of every song, but having used viper for years I just gave up on trying to fix this). But Dolby doesn't process audio.

I tried to install Dolby Atmos but i can't run it. is there anybody who can success?

hello
dolby digital + works very well for me ( redmi note 7 - xiaomi eu 9.8.15 - evira 4.5 and the mod Atlantis Concept 2.1 )
my mod on magix: Ainur JamesDSP + Audio Modification Library + Dolbi Digital+ and Viper4Android FX

works perfectly fine on 10.3.6.0

Works perfectly in xiaomi eu - MIUI 11 - 9.9.26

Not working dolby on miui 11 eu mi9

Does this work on an android Pie Rom, like PE plus? Has anyone tried it?
thanks!

I don't use the above mods.
I use V4A, Dolby, Audio compatibility patch, and audio modification library.
It works on my redmi note 7, MIUI 11.0.2.0

Dolby and V4A both work, JDSP crashed... But I only use first two anyway
Running MiuiMiX 11.1 v9.10.31 beta on MiMax3
(latest MagiskManager, Magisk 19.4)
Thanks for the info :good:, speakers sound more clear now

It works for me !!!
Works on MIUI Global Ver. 10.3.6 Redmi Note 7.
Many Thanks.

Piroflam said:
Does this work on an android Pie Rom, like PE plus? Has anyone tried it?
thanks!
Click to expand...
Click to collapse
It doesn't work on Lineage OS 16 on my rn7 unfortunately, before I had Miui 10 global and it did work. Pity
EDIT2: Hmm i did get it to work:
Cleared all sound mods. Boot to recovery flash Viper4android legacy 4.4, flash Dolby Digital Unity for Pie(latest, see their dedicated forum on xda) and lastly flash Audio Modification Library 2.4 (it should say patching viper and dolby) and then reboot.
Dolby Digital crashes out after changing a setting but then just restart the app and the setting change is there. And it works !