Flashed stock rom, flashed different versions of twrp.
But the same stuck on logo after flashing every Oreo rom.
Want to taste but can't, somebody's got any solution?
May be an issue of recovery. Try with twrp 3.1.1-3 from below link.
https://androidfilehost.com/?fid=889764386195917689
Only 8.1 ROMs are not booting. also tried with this recovery and also with mine ported one. But nothing works
i also had the same problem.we need to patch the boot image after flashing the roms provided by daniel hk sir
preform a clean flash{wipe internal storage}
flash supersu 2.82 after flashing the rom
it will work for sure
i got it working on my phone
Can you give me that patched boot image.
How to patch?
Related
Hello, I have a problem with my Xiaomi Redmi 4X phone, as I said, I can not flash any Custom ROM for Android 8.1 All this happened after I put my phone in service to replace the display on which I've broken it. Now any version of Android 8.1 I try to flash results in a bootloop. I have to mention 3 things
1. In TWRP when flashing I noticed that all Custom ROMs are stuck in "Flashing system files ..." for a few seconds after saying that it ended flash-but did not abssolut anything.
2. Now a few hours I accidentally flashed Pixel Experince, but now I have the same problem.
3. I can not flash any versions of TWRP.Not much but...
THIS IS HAPPENING ONLY ON THE ANDROID OREO ROMs, Nougat ROMs works perfectlly
Try to flash first latest version of twrp or you can flash redwolf recovery then flash firmware v40 then try clean flash for oreo roms
As mentioned by above user...(latest TWRP recovery and firmware is must)
Flash latest TWRP recovery, 3.2.1-0 should be fine but there's update available 3.2.2.-0 so any will do.
Next, flash latest firmware.
Clean flash is must when changing OS.
It's most likely you don't have latest TWRP recovery and firmware.
Do backup first.
Hi guys.
The problem is gsi is Bootlooping every time in custome vendor stock vendor no matter how much i try to install with different methods by different vendors rom.
Tried formatting many times, changing file system, flashing vbmeta, even flashed on both slots nothing happened same Bootloop.
Even tried flashing no verify decryption zip, magisk.
Don't get it what's the problem its booting but Bootlooping.
If gsi is not supported or corrupt img so it'll not boot right? But booting means it gets installed.
But every time the gsi get stuck at bootanimation
Need help what to do now because it installing successfully everytime but at the end Bootlooping.
Tried ported gsi roms
And official gsi roms
Those are not booting..
Urgent help will be appreciated and I'll be very thankful.
:good:
arya_tech said:
Hi guys.
The problem is gsi is Bootlooping every time in custome vendor stock vendor no matter how much i try to install with different methods by different vendors rom.
Tried formatting many times, changing file system, flashing vbmeta, even flashed on both slots nothing happened same Bootloop.
Even tried flashing no verify decryption zip, magisk.
Don't get it what's the problem its booting but Bootlooping.
If gsi is not supported or corrupt img so it'll not boot right? But booting means it gets installed.
But every time the gsi get stuck at bootanimation
Need help what to do now because it installing successfully everytime but at the end Bootlooping.
Tried ported gsi roms
And official gsi roms
Those are not booting..
Urgent help will be appreciated and I'll be very thankful.
:good:
Click to expand...
Click to collapse
You should try generic gsi from this site https://mirrors.lolinet.com/firmware/gsi/
Choose generic AB.. currently latest one is from 11th July @ Developer Preview 5.
Download Havoc os, flash it on slot A.
Reboot to slot B, wipe everything and reboot to recovery again.
Then flash gsi file, permissiver v4, darkness kernel, magisk canary, and disable force encryption.
Wait for it to boot up. ?
How to reboot to slot B and flash to slot A? Zip files are flashing like custom roms, GSI images are for slot A, slot B and AB. Sorry but I'm noob in flashing GSI roms. I never succeeded with that... ((
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
ajadamjones87 said:
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
Click to expand...
Click to collapse
your devices is encrypted try flash other custom rom first then try revert to stock hope it help u out
Thanks very much for your response. Based on your advice i tried to flash the latest Kraken 11 Vanilla rom from this fourm, however after installing via TWRP now i can't even get into recovery anymore, just goes straight to fastboot.
Any other suggestions please?
I have now managed to get back in to TWRP and tried flashing lineage latest rom but still i am stuck in a boot loop taking me to fastboot this time.
Please can someone help suggest hwo i can get my phone working agian. At this point i dont care which rom i end up (custom or stock) with as long as i can get it to function again
If your device is rooted, you can NOT update the system using the OTA (over-the-air), or the device will be stucked in bootloop.
If your device is rooted, you need to update the system MANUALLY, using the fastboot or spflashtool.
I suggest to update the system using the fastboot.
Now, you need to flash the whole MIUI again, except userdata and you will have your device back.
For anyone with a asimilar problem i eventually managed to fix my issue by using miflash tool version 20180528 and flashing merlin_eea_global_images_V12.0.10.0.QJOEUXM_20210413.0000.00_10.0_eea_c4a9d5d7fc fastboot version which i downloaded from the xiami site.
I had to try this multiple times because the extraction of the file did not seem to be correct on the first attempts.
I have installed lineage recovery lineage-19.1-20220514-recovery-Linux4-beyond1lte.img and i flashed lineage-19.1-20220514-UNOFFICIAL-Linux4-beyond1lte.zip
i also have updated my firmware to G973FXXUFHVE1 and G973FXXUFHVE1-device_tree-odin_flashable.tar
phone doesnt boot at all after installing i can go to recovery i tried both lineage and twrp both work i even tried to fflash full stock rom but not worked
any ideas to fix that ? thenk you
Hi
A few months ago I was able to flash on angelica lineage-17.1-20210326-UNOFFICIAL-angelica.zip and this worked well. Yesterday I tried to flash the s same image again and after several attempts I get a black backlit screen when lineage is meant to start. I reflash stock _V12.0.10.0.QCRMIXM then a recovery - PBRP 3.0.1. From there I was having issue
What is the flashing process for an unlocked device that has something like TWRP/Pitch Back/Orange Fox installed?
I guess once you unlock and can flash the recover you use the recover to flash the zip, then reboot and flash magisk.zip and everything should work? Or is there some step missing.
I had this problem too with the google pixel 7 pro. Can't help ya there on that one. I even tried re installing older firmware and it still didn't work. Maybe the bootloader is permanetly downgradable but the firmware of the stock is. Just a guess. Lineage os 20 is an unofficial build at the moment that receives hardly any updates.