hi all,
i have the following problem...
yesterday i obtained the root permisions for the galaxy and then i installed a cwm... and after that i got the problem bootloop. i tried to use odin and fix it but my windows 7 doesn't recognize it (i installed samsung kies and all the drivers). then i removed the cwm recovery and now i get Deleting Cryption Meta Data message before i enter in stock recovery and can't do nothing. Any solution?
sorry for my bad english
Check this link may help : HERE
nothing if i connect the phone to the pc windows says USB device not recognized
Try this HERE
EwOkie said:
Try this HERE
Click to expand...
Click to collapse
the phone goes into download mode and recovery mode 3e stock...i see the battery logo and samsung logo but if i connect the phone when in download mode to the PC it doesnt recognize it
Ok Follow this here :
Unplug Phone from PC.. if using Kies uninstall it ...Reboot PC
Install Samsung latest USB Drivers.. Reboot PC when done
Open ODIN
Plug in Phone while in Download mode to PC.. till it Recognises it
Now open ODIN and Try again
Check My HOW TO at my signature and scroll to bottom
ewokie said:
ok follow this here :
Unplug phone from pc.. If using kies uninstall it ...reboot pc
install samsung latest usb drivers.. Reboot pc when done
open odin
plug in phone while in download mode to pc.. Till it recognises it
now open odin and try again
check my how to at my signature and scroll to bottom
Click to expand...
Click to collapse
all done bro!!! You are the best! Thanx a lot
No problem glad it worked out for you :good:
danielbulan97 said:
hi all,
i have the following problem...
yesterday i obtained the root permisions for the galaxy and then i installed a cwm... and after that i got the problem bootloop. i tried to use odin and fix it but my windows 7 doesn't recognize it (i installed samsung kies and all the drivers). then i removed the cwm recovery and now i get Deleting Cryption Meta Data message before i enter in stock recovery and can't do nothing. Any solution?
sorry for my bad english
Click to expand...
Click to collapse
hey buddy i experienced this problem before...
use this CWM6012-CM9-recovery ..
hope this help you
Sent from my GT-I9001 using xda premium
Hello there,
I am Belgian so i'm gonna try to do my best to find my english somewhere
I have a samsung galaxy s3 mini gt-i8190..
I have tried to flash with odin thru pda BUT it stopped with fail as result..
Then i have tried to put original firmware back the same way but fail again,
then tried again with same original firmware and succeeded..
Phone froze at samsung logo, tried again and now i got the message "firmware upgrade encountered an issue. please select recovery mode in Kies & try again."
Ok, so i plug the phone back in the usb cable: Device Not Recognized! (windows 7 ultimate laptop).
I can get in to download mode: still not recognized via usb.
recovery mode DOESN'T work at all (3 button combo) just the error message at the normal boot and the download mode.
So basically i can't flash cause i can't connect, reinstalled drivers, used another pc, same thing...
It doesn't even charge the phone..
Odin mode says:
Product name: GT-I8190
Custom Binary Download: YES (4 counts)
Current binary: Custom
System status: Official
So does there somehow any file exists to put on my sd card to access usb OR a file to go into recovery mode.
Any tip is welcome, will try them all..
Thanks by advance,
yoni089
Have you tried installing Samsung's USB Driver? I know installing kies comes with the USB drivers but just in case. You might want to check if it's properly installed in your computer. Try reseting your counter first with Triangle Away. Please tell me more of what you did.
Click on the thanks button if I helped!
Change usb port and make sure all processes with kies are killed in taskmanager.
Open Odin. Put the phone in download mode and connect usb.
Hello,
Thanks for the reply's
I did install Odin first, when i flashed my phone it failed..
So i decided to install kies to make sure i had the right drivers,
Uninstalled Kies without the drivers. The phone was still recognized back then!!
Flashed it again and again FAIL!
Since then NOTHING works with the usb connection, windows does not recognize my phone "unknown device".
So it doesnt even know what it is..
Uninstalled the drivers and reinstalled them, rebooted my laptop with battery out for a minute but nothing works..
Also i tried to connect to another pc but no luck..
So i guess the key on my phone for the driver to find is missing/deleted by flashing and failing..
That's why i asked if there is any file to putt on my sd card to be recognized by my computer.
I did tried many times using another usb port..
Also tried with and without sim card/ sd card.
(btw: does they have to be in there anyway?)
Thnx and grtz,
Yoni089
please post where odin fail?
samersh72 said:
please post where odin fail?
Click to expand...
Click to collapse
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
yoni089 said:
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
Click to expand...
Click to collapse
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
SethCode'z said:
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
yoni089 said:
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
Click to expand...
Click to collapse
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
SethCode'z said:
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
Click to expand...
Click to collapse
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
yoni089 said:
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
Click to expand...
Click to collapse
Did your three button combination work for recovery mode before this happened?
tys0n said:
Did your three button combination work for recovery mode before this happened?
Click to expand...
Click to collapse
I have no idea, i never needed it before..
yoni089 said:
I have no idea, i never needed it before..
Click to expand...
Click to collapse
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
tys0n said:
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
Click to expand...
Click to collapse
It just turns on to the triangle that says there is an issue with the firmware upgrade..
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
Do provide the odin log, probably corrupted PIT ?
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
linux is your answer it never fails
Sent from my Vodafone Smart II using xda premium
AssToast said:
Do provide the odin log, probably corrupted PIT ?
Click to expand...
Click to collapse
How do i get that log?
tys0n said:
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
Click to expand...
Click to collapse
no it doesn't, not even my laptop does..
yoni089 said:
How do i get that log?
no it doesn't, not even my laptop does..
Click to expand...
Click to collapse
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
nuotal you
tys0n said:
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
Click to expand...
Click to collapse
I did it all
Yes it was the original usb cable..
My friend is not a techie as me and he asked me to fix his phone... it keeps on rebooting and when i am trying to reflash via odin the odin didn't recognized the phone. I had installed kies and other drivers for this. How can i reflash this Samsung Galaxy Ace if i didn't enable the USB Debugging mode on the settings?
up for today
onebluemidnight said:
My friend is not a techie as me and he asked me to fix his phone... it keeps on rebooting and when i am trying to reflash via odin the odin didn't recognized the phone. I had installed kies and other drivers for this. How can i reflash this Samsung Galaxy Ace if i didn't enable the USB Debugging mode on the settings?
Click to expand...
Click to collapse
I don't get it how can you enable USB debugging when your phone always reboots.
Goto download mode by pressing power and home button in switch off condition and then flash via odin.
cyb3rillusi0n said:
Goto download mode by pressing power and home button in switch off condition and then flash via odin.
Click to expand...
Click to collapse
I have same problem about it. I was tried but it was did nothing. The external memory is detected but the internal isnt. I was tried to update ADB driver via windows update but it is useless. Nothing happen again. So would you like to show to me another ways? thanks :good:
onebluemidnight said:
My friend is not a techie as me and he asked me to fix his phone... it keeps on rebooting and when i am trying to reflash via odin the odin didn't recognized the phone. I had installed kies and other drivers for this. How can i reflash this Samsung Galaxy Ace if i didn't enable the USB Debugging mode on the settings?
Click to expand...
Click to collapse
Wrong section mate ...
You must read rules before posting nothing, so the next time go to Q&A THREAD
Thank you for understanding it
Anyone have any experience with this and any ideas? Trying to flash latest N960U1 firmware from sammobile and following their directions exactly. I have the Samsung USB drivers installed, I'm using Odin v3.13.3, and I reboot into download mode and Odin always fails with after SetupConnection or gets stuck at Initialization. I tried rebooting my computer, rebooting the phone a few times, restarting Odin a few times, nothing seems to change. Any ideas? Thanks in advance.
RickyShade said:
Anyone have any experience with this and any ideas? Trying to flash latest N960U1 firmware from sammobile and following their directions exactly. I have the Samsung USB drivers installed, I'm using Odin v3.13.3, and I reboot into download mode and Odin always fails with after SetupConnection or gets stuck at Initialization. I tried rebooting my computer, rebooting the phone a few times, restarting Odin a few times, nothing seems to change. Any ideas? Thanks in advance.
Click to expand...
Click to collapse
A screen shot of this on your PC
May help to provide assistance.
if u have an n960u and trying to flash u1, ud best make use of the xda search feature and do some reading.
RickyShade said:
Anyone have any experience with this and any ideas? Trying to flash latest N960U1 firmware from sammobile and following their directions exactly. I have the Samsung USB drivers installed, I'm using Odin v3.13.3, and I reboot into download mode and Odin always fails with after SetupConnection or gets stuck at Initialization. I tried rebooting my computer, rebooting the phone a few times, restarting Odin a few times, nothing seems to change. Any ideas? Thanks in advance.
Click to expand...
Click to collapse
Make sure you are using the original cable that came with phone. If you are and still having troubles then remove all you USB devices.
I built a new PC recently and couldn't flash which was driving me nuts. Turned out that once I removed the USB hub from PC flashing worked. No I was not attaching phone to hub but to a USB 2 port. The hub was a powered hub but I thought it was working fine without the added power supply but that caused issues with Odin. Put the hub back in place with power to it and now can flash too.
Drove me nuts. I even dug out an old laptop that had Windows 8 on it just so I could use Odin but figured out issue on new PC...
Hello
I am stuck in a bootloop when i try to hard reset it gives a "error updating for slot elect"
I do not have i do not have anything like USB debugging enabled as i cant do that.
I only know that it is "SM-A528B/DS"
I have tried using odin but it says " SetupConnection.." i have the newest version installed
To use Odin, the device must be in download mode. Try this:
Power device off
Hold both Volume Up and Down buttons, do not press Power
While holding Volume buttons, plug in USB cable from computer
Follow on screen prompt to enter software download mode
You should then be able to flash the stock firmware in Odin.
V0latyle said:
To use Odin, the device must be in download mode. Try this:
Power device off
Hold both Volume Up and Down buttons, do not press Power
While holding Volume buttons, plug in USB cable from computer
Follow on screen prompt to enter software download mode
You should then be able to flash the stock firmware in Odin.
Click to expand...
Click to collapse
Hi the device was in download mode but it keeps saying "SetupConnection..."
And i dont know if i was using the right stock firmware as there are alot of versions of the firmware the only things i know are that on the phone box it says "SM-A528B/DS" and "made in india" can you help me get the right sotck firmware?
qiodizjqdpiojqfioj said:
Hi the device was in download mode but it keeps saying "SetupConnection..."
Click to expand...
Click to collapse
Do you have the correct drivers installed?
qiodizjqdpiojqfioj said:
And i dont know if i was using the right stock firmware as there are alot of versions of the firmware the only things i know are that on the phone box it says "SM-A528B/DS" and "made in india" can you help me get the right sotck firmware?
Click to expand...
Click to collapse
V0latyle said:
Do you have the correct drivers installed?
i just looked up "usb drivers samsung" and installed the first thing so i might not have the correct driver installed
Click to expand...
Click to collapse
i flashed my phone but its went back in a bootloop a bit after