Database Develop

P9 Lite 2017 BootLoop

After installing twrp recovery i decided to install SU too. After that my phone is stuck in bootloop, before SU installation it worked just fine (with just the twrp) ;[
So here's my phone info (all i could get):
Model: PRA-LX1 (other ppl place here some diffrent numbers but i dont know where to find them since i cant even start my phone)
FCC ID: QIPRA-LX1
Well if someone could find a stock frimewere (or pre-rooted custom rom that would work on this phone) and give a link to it i would be greatfull couse i searched a lot and i'm still with nothing.
Now im left with empty brick with no OS at all...
Help! ;[

Maybe you should try this, it may find the proper firmware for your device.

Firicel69 said:
Maybe you should try this, it may find the proper firmware for your device.
Click to expand...
Click to collapse
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...

Wilchu said:
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Click to expand...
Click to collapse
Wrong thread mate, open this in P9Lite not in P8Lite

If this is P8 Lite 2017, we have seperate subforum for it :highfive:

D1stRU3T0R said:
Wrong thread mate, open this in P9Lite not in P8Lite
Click to expand...
Click to collapse
... But this is P9 Lite "2017" and what i heard is that this model comes with name of P8 Lite 2017 and if im not wrong there is no P9 Lite "2017" thread just P9 Lite which is completly diffrent device!

Let's do this in a diffrent way...
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.

Wilchu said:
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.

D1stRU3T0R said:
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
Click to expand...
Click to collapse
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
And after that phone booted but i got encryption error, and cant do much

Wilchu said:
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
(but i will still try tho)
Click to expand...
Click to collapse
Yeah, with flash. Search universal flashboot anf than flash everything in order (these are not the orders, just an ex) flashboot boot boot.img flashboot recovery recovery.img etc(extracted from the zip file, maybr with huawei extractor)
But try to update you're TWRP, either to personas one or OpenKirin's TWRP, you should not have any problem on TWRP 3.1.1-0

Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[

Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
Did you go to the P8 Lite 2017 thread? I think that device has the same model number

Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
First.. i supose you have TWRP ...
So, if im not wrong, your phone use 3 files to install the firmware ( like P8 Lite 2017 )...
Must be like this:
Download the 3 zip files (update.zip, cust and public data) of the firmware you want to flash and copy them to your phone’s memory.
Unplug the USB cable and power off your device.
Now hold Vol up + Power keys for a few seconds to boot into TWRP mode.
In TWRP, go to Install and flash the update.zip package.
After that, install the remaining two update files (cust and then the public data package).
Wipe the dalvik cache( or do a factory reset ) and then reboot normally into the new system.
Now the ROM... i don´t know where you can find it, sorry ...
.

Huawei p9 always rebooting every 2 minutes

Hello everyone,
I'm new in xda's forum and so that's my first thread.
I hope you can help me.
I have a Huawei P9 EVA-L09C02B357 that lately it automatically reboot about every 2 minutes. The interesting things is that it happened only if I boot the ROM (stock or not). But in recovery mode (or erecovery) or fastboot mode, this automatic reboot doesnt manifest.
All is started when I have tried to install RROS Nougat on my phones and it was working when i tried to turn off the phone and then turn it on but nothing, the phone was stuck on boot phase.
I decided to switch data file system from f2fs to ext4 and then reinstall it as the guide explains.
https://forum.xda-developers.com/p9/development/rom-t3606185
The ROM worked correctly except the fingerprint sensor.
During the first configuration, it scans my fingerprint but for a bug, i couldnt go over the first scan.
Searching on the internet I understood that the problem could be the modem. But for a mistake I have flashed the wrong fix for the modem (it was for another phone, don't ask me how I didnt notice it).
Now even with stock rom or custom the phone has this automatic reboot. Particularly the stock rom has many bugs every time i flash it, like: there isn't the IMEI, there aren't any preinstalled apps, is really slow in some situations and the default keyboard is the voice typing...
I think the solution is to flash the stock modem, but when I try to flash it via fastboot, it says: "No suitable files selected. Check profiles.xml".
Thanks in advance
P.S. sorry for my bad english :C

Go back to MM version and. Factory reset and upgrade it to nougat

vampirian said:
Go back to MM version and. Factory reset and upgrade it to nougat
Click to expand...
Click to collapse
Hi vampirian,
thank you for the answer.
Sorry the ignorance but... what's MM version?

Party5999 said:
Hi vampirian,
thank you for the answer.
Sorry the ignorance but... what's MM version?
Click to expand...
Click to collapse
MM= MarshMallow, android 6

Nate91 said:
MM= MarshMallow, android 6
Click to expand...
Click to collapse
Can you send me the MM firmware?

To go back to android 6, my phone should have android 7 installed? Cuz now i have some problems to flash it.

UPDATE
Thank you so much vampirian!
I have successfully installed android 6 and the automatic reboot is gone.
Now i'll try to update it and probably retry to install RROS .
(yes i'm stubborn).

Party5999 said:
Thank you so much vampirian!
I have successfully installed android 6 and the automatic reboot is gone.
Now i'll try to update it and probably retry to install RROS .
(yes i'm stubborn).
Click to expand...
Click to collapse
I know I don't write a lot of things or give you all the links. But it was good for you to research and learn more about your device good job and good luck with rros (although is dated and its not really worth, but that's just my opinion )

vampirian said:
I know I don't write a lot of things or give you all the links. But it was good for you to research and learn more about your device good job and good luck with rros (although is dated and its not really worth, but that's just my opinion )
Click to expand...
Click to collapse
Last thing...
The serial number of my phone now is "EVA-L09C900B182". Which firmware for nougat should I download?

Party5999 said:
Last thing...
The serial number of my phone now is "EVA-L09C900B182". Which firmware for nougat should I download?
Click to expand...
Click to collapse
This is not the serial number (of your device) but the stock firmware build mame/number
If you debrand to c432 (EU) from your c900, you will automatically receive (must have SIM card in) OTA updates first to b242 (over your b182) and then further OTA updates up to b399 or even b502
PS: For debranding to c432 you can use this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2

zgfg said:
This is not the serial number (of your device) but the stock firmware build mame/number
If you debrand to c432 (EU) from your c900, you will automatically receive (must have SIM card in) OTA updates first to b242 (over your b182) and then further OTA updates up to b399 or even b502
PS: For debranding to c432 you can use this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Click to expand...
Click to collapse
Thank you again for your incredible posts.
The phone is updating now to b2xx (i don't remeber XD)... which ROM for my huawei p9 do you recommend?

Party5999 said:
Thank you again for your incredible posts.
The phone is updating now to b2xx (i don't remeber XD)... which ROM for my huawei p9 do you recommend?
Click to expand...
Click to collapse
If you have debranded to c432 as suggested in my previous post, let it update as far as it gets (b398, b399 or even b502).
Once it stops receiving OTAs, perform Hard reset with wiping Internal memory (you can do it from Settings or from eRecovery)
Btw, if it attempts an OTA but it fails, then go back to the updating screen and choose Full update, instead of (default) differential update.
Which ROM to suggest you - Magic Rainbow v4:
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292

zgfg said:
If you have debranded to c432 as suggested in my previous post, let it update as far as it gets (b398, b399 or even b502).
Once it stops receiving OTAs, perform Hard reset with wiping Internal memory (you can do it from Settings or from eRecovery)
Btw, if it attempts an OTA but it fails, then go back to the updating screen and choose Full update, instead of (default) differential update.
Which ROM to suggest you - Magic Rainbow v4:
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292
Click to expand...
Click to collapse
Now the phone is installing the b395 update. Is the hard reset necessary?
I knwo the existence of Magic Rainbow but i didn't know that it is based on Emui. I'll download it because i guess it is more stable than RROS.

It seems that i cant go over b395.

Party5999 said:
It seems that i cant go over b395.
Click to expand...
Click to collapse
Are you now on EVA-L09 c432 b395, exactly as that?
You do not receive further OTA, or you received OTA but it failed (in that case force Full update as suggested above)?
If you're really not receiving OTA b398 or b399, try Hard reset with wiping Internal memory - if still mo OTA, install b398 by HWOTA method
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Once you reach b398, you're ready for MR v4.

zgfg said:
Are you now on EVA-L09 c432 b395, exactly as that?
You do not receive further OTA, or you received OTA but it failed (in that case force Full update as suggested above)?
If you're really not receiving OTA b398 or b399, try Hard reset with wiping Internal memory - if still mo OTA, install b398 by HWOTA method
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Once you reach b398, you're ready for MR v4.
Click to expand...
Click to collapse
Yes, I'm on it but at the moment i dont receive any kind of update. I'll try Hard reset tomorrow.
Can you explain the method to make Hard reset, because i dont understand what should I do...

Party5999 said:
Yes, I'm on it but at the moment i dont receive any kind of update. I'll try Hard reset tomorrow.
Can you explain the method to make Hard reset, because i dont understand what should I do...
Click to expand...
Click to collapse
If you boot to eRecvery ( Vol+ and Pow) you will find Hard reset option.
Similarly, under Settings /Advanced Settings/ Reset phone there is also hard reset option - cannot tell you better details, I have TWRP and MR v4, I don't have these options.
Also if you 'dial' ' *#*#2846579#*#* a hidden Project menu will open, with Restore Factory option

zgfg said:
If you boot to eRecvery ( Vol+ and Pow) you will find Hard reset option.
Similarly, under Settings /Advanced Settings/ Reset phone there is also hard reset option - cannot tell you better details, I have TWRP and MR v4, I don't have these options.
Also if you 'dial' ' *#*#2846579#*#* a hidden Project menu will open, with Restore Factory option
Click to expand...
Click to collapse
The only method that i know to go in erecovery, if bootloader is locked, is by using PC and know i can't...
What if I use firmware finder?

Party5999 said:
The only method that i know to go in erecovery, if bootloader is locked, is by using PC and know i can't...
What if I use firmware finder?
Click to expand...
Click to collapse
Both two last options as listed (Settings and Project Menu) are present in stock ROM.
And you can boot to eRecovery as above - shut down, then press and keep pressing Vol+ and Pow together
If not OTA, then the best way for manual updating is HWOTA, I gave you the link also above
But still, you didn't confirm, are you really on EVA L09 c432 b395, ie, you are not on L19 (by mistake)

zgfg said:
Both two last options as listed (Settings and Project Menu) are present in stock ROM.
And you can boot to eRecovery as above - shut down, then press and keep pressing Vol+ and Pow together
If not OTA, then the best way for manual updating is HWOTA, I gave you the link also above
But still, you didn't confirm, are you really on EVA L09 c432 b395, ie, you are not on L19 (by mistake)
Click to expand...
Click to collapse
I was on EVA-L09 c432 b395 and now I'm on b502. I tell you what I did.
I tried to make a reset bt the Project Menu option but, the reset it didn't gave any update...
So I tried with firmware finder (android version) and I used the DNS method. I have chosen the b397 OTA and the updater found it.
During the download, it arrived at 25% and suddenly the phone has found the b502 for a total of 4 patch to download together (I dont know how to explain that thing).
After download the phone reboot for installing phase but it failed... and on boot it appeared a red warning, then i went to erecovery, shut off the phone and go to recovery mode for a factory reset.
Factory reset was a success but on boot the red warning still appear but i tried to continue to boot... fortunately it was all ok but the phone was on b395.
It magically appeared the screen for b502 Full-OTA update and now I have it!
I wouldn't understimate you but I always prefer to try solution by myself.
(sorry again for my bad english)

[GUIDE] EMUI 9.0 to EMUI 8.0 downgrade

!!!!!!! It is working for my BLA-L29C432 !!!!!!
1. Download and Install HiSuite 9.0.2.301 ( it will find an update: install the update) ( http://s.go.ro/zssb2204 )
2. Connect your phone to PC.
3. Press Update.
4. Press Switch to other version.
5. Press Restore.
6. Follow the instructions.
View attachment 4599383

Can someone confirm if it is working. I would like to try emui 9 and come back xD
Sent from my BLA-L29 using Tapatalk

The app doesn't show "switch to another version" option
why?

You have another version of phone/firmware.

Has anyone tried it? Any success? Does this method require DNS change or not? I'm stuck with EMUI 9.0.0.47 beta after doing factory reset so eRecovery doesn't see previous and next EMUI versions.

dr_iggy said:
Has anyone tried it? Any success? Does this method require DNS change or not? I'm stuck with EMUI 9.0.0.47 beta after doing factory reset so eRecovery doesn't see previous and next EMUI versions.
Click to expand...
Click to collapse
Yes ,it works,just install the provided HiSuite 9.

dr_iggy said:
Has anyone tried it? Any success? Does this method require DNS change or not? I'm stuck with EMUI 9.0.0.47 beta after doing factory reset so eRecovery doesn't see previous and next EMUI versions.
Click to expand...
Click to collapse
Doesn't work for me with ALP-L09C432 and the EMUI 9.0.0.47 beta.

zulykat said:
The app doesn't show "switch to another version" option
why?
Click to expand...
Click to collapse
I've the same problem.

Doesnt work with BLA-L29C432.

I successfully manage to downgrade from EMUI 9 to 8 (C150) using HiSuite ( 5.0.2.301 ) + FunkyHuawei downgrade firmware: (Downgrade from EMUI9 to EMUI 8 BLA-L29 8.0.0.150(C432).
It was the only method that worked me.

If you are unlocked you can use HWOTA to downgrade back.
Just a note for anyone stuck.

HWOTA didnt work for me sadly

SurfaceCube said:
HWOTA didnt work for me sadly
Click to expand...
Click to collapse
Ok, follow the guide from here - > https://forum.xda-developers.com/huawei-p20/how-to/guide-how-to-rollback-emui-9-beta-to-t3841687 <- but without downloading the tool from there, use this one instead - >
https://mega.nz/#!oxkQWApD!-PtLtrekX3DS-iglnr7xpdB1285dF1nZSiOSHyZsqKA .

Thanks for trying to help me ! Sadly the bat stays stuck at waiting for device after I reboot in TWRP.
EDIT: Modified the bat so it begins now where I was stuck and it seemed to have done the trick. Will report if it worked !

Thanks for all the help Pretoriano80, managed to finally make it back. Had to fiddle with some things, erecovery kept whining till I fed it a SIM card (don't really know why but whatever-). The only thing remaining is I want to relock my bootloader, but did not succeed to get a "LOCKED" status instead of "RELOCKED". Need it in case I need to take my phone to the service center one day, do you know how to solve this one without using DC Unlocker ?

deleted

can this be done with booloader locked??

I have mate pro 10 with xloader 01 (BLA-L29C185B140-SP1 (8.0.0.140) )
I want to try flash BLA-L29C185E2R1P8B108-log (9.0.0.108)
Is possible to downgrade to my previous oreo (with xloader 01 ) or my phone will bricked
Thanks

BSAKotb said:
I have mate pro 10 with xloader 01 (BLA-L29C185B140-SP1 (8.0.0.140) )
I want to try flash BLA-L29C185E2R1P8B108-log (9.0.0.108)
Is possible to downgrade to my previous oreo (with xloader 01 ) or my phone will bricked
Thanks
Click to expand...
Click to collapse
You won't come back to a firmware <8.0.0.148 (xloader 01).

Working like charm on Mate 10
Pretoriano80 said:
Ok, follow the guide from here - > https://forum.xda-developers.com/huawei-p20/how-to/guide-how-to-rollback-emui-9-beta-to-t3841687 <- but without downloading the tool from there, use this one instead - >
https://mega.nz/#!oxkQWApD!-PtLtrekX3DS-iglnr7xpdB1285dF1nZSiOSHyZsqKA .
Click to expand...
Click to collapse
Hello, it's working like charm on Mate 10 ALP-AL00 with 9.0.0.120
Thank you very much!!!

Help please for android security patch Mate 10 ALP-L29

Good afternoon,
So I got a Mate 10 Dual sim ALP-l29 (C636). I used to be on EMUI 10, but I want to root it (for one reason only, unlock camera api to get raw on the monochrome sensor).
I managed to roll back 2 times and ends up with 8.0.0.143 with the security patch of 1 october 2018. Unfortunately I need to be on June 2018 to be able to unlock the bootloader and then, root it.
So I tried hisuite proxy and copy paste links to try to get to an older firmware but I'm stuck.
Ideally I want ALP-L29C636B136 (8.0.0.136)
What should I put for CUST and PRELOAD ?
ALP-L29-OVS 8.0.0.136
ALP-L29-CUST 8.0.0136(C636)
ALP-L29-PRELOAD 8.0.0.136(C636R1)
I tried, hisuite, it download the files but then it stops at the install and failed.
I tried via the sd card and dload folder but stops at 5%.
A bit lost, if someone could help that would be awesome !

julientaming said:
Good afternoon,
So I got a Mate 10 Dual sim ALP-l29 (C636). I used to be on EMUI 10, but I want to root it (for one reason only, unlock camera api to get raw on the monochrome sensor).
I managed to roll back 2 times and ends up with 8.0.0.143 with the security patch of 1 october 2018. Unfortunately I need to be on June 2018 to be able to unlock the bootloader and then, root it.
So I tried hisuite proxy and copy paste links to try to get to an older firmware but I'm stuck.
Ideally I want ALP-L29C636B136 (8.0.0.136)
What should I put for CUST and PRELOAD ?
ALP-L29-OVS 8.0.0.136
ALP-L29-CUST 8.0.0136(C636)
ALP-L29-PRELOAD 8.0.0.136(C636R1)
I tried, hisuite, it download the files but then it stops at the install and failed.
I tried via the sd card and dload folder but stops at 5%.
A bit lost, if someone could help that would be awesome !
Click to expand...
Click to collapse
You can't downgrade bellow that version.

Pretoriano80 said:
You can't downgrade bellow that version.
Click to expand...
Click to collapse
Oh crap, there is absolutely no solution ?

julientaming said:
Oh crap, there is absolutely no solution ?
Click to expand...
Click to collapse
There is a solution, but requires the back cover removal and a paid software.
However, if you are interested in camera API, you will be disappointed, because Huawei devices has only limited support, no matter the firmware version.

Pretoriano80 said:
There is a solution, but requires the back cover removal and a paid software.
However, if you are interested in camera API, you will be disappointed, because Huawei devices has only limited support, no matter the firmware version.
Click to expand...
Click to collapse
Isn't possible if I do this solution with the back cover and root the phone to modify the build.prop file with persist.camera.HAL3.enabled=0 ?

julientaming said:
Isn't possible if I do this solution with the back cover and root the phone to modify the build.prop file with persist.camera.HAL3.enabled=0 ?
Click to expand...
Click to collapse
Nope, camera2api support it's always limited. It was like that since Mate 10/Pro was released and sadly Huawei never enabled full support.

Pretoriano80 said:
Nope, camera2api support it's always limited. It was like that since Mate 10/Pro was released and sadly Huawei never enabled full support.
Click to expand...
Click to collapse
ok so I did the ministryofsolutions for 30 $ and it works, I have unlocked the bootloader + rooted my phone. Now I'm exploring files to see if I can find anything about the camera

Roalback

Hello everyone. I'm very disappointed at 10.1 update with camera results specially at nigh mode.. Yesterday night I roaled back to 10.0.0.175 version. I tested night mode on. Same scenario and there wasnt so much noise at 10.1 version... So I want to return at 10.0.0.185 or 180 update witch was best update for camera.. The problem is that version isn't available on huwawei pc suite.. I'm not rooted any solutions?
Thnk you all

step-by-step downgrade via HiSuite to 9.1.0.x and then step-by-step upgrade via OTA up to the necessary version of 10.0.x.x.

rm001 said:
step-by-step downgrade via HiSuite to 9.1.0.x and then step-by-step upgrade via OTA up to the necessary version of 10.0.x.x.
Click to expand...
Click to collapse
Hello brother, it can't be happen... Yesterday I roaled back to 10.0.0.175 phone jumped to 195 and then to 10.1.0.. 120 etc etc 10.1.0.181...Although I'm asking how I can update to 10.0.0.180-185

Noexcusses said:
Hello brother, it can't be happen... Yesterday I roaled back to 10.0.0.175 phone jumped to 195 and then to 10.1.0.. 120 etc etc 10.1.0.181...Although I'm asking how I can update to 10.0.0.180-185
Click to expand...
Click to collapse
Ok, but why you didn`t roll back from 10.0.0.175 down to 9.1.0.x? When you press "Upgrade" in the HiSuite, there is an option "Other versions", you choose it, and there is a possibility to downgrade the FW. You downgrade step-by-step to 9.1.0.x, then start to uograde to 10.0.x.x. and stop when you find the suitable FW.

rm001 said:
Ok, but why you didn`t roll back from 10.0.0.175 down to 9.1.0.x? When you press "Upgrade" in the HiSuite, there is an option "Other versions", you choose it, and there is a possibility to downgrade the FW. You downgrade step-by-step to 9.1.0.x, then start to uograde to 10.0.x.x. and stop when you find the suitable FW.
Click to expand...
Click to collapse
Because I thought I was already fine on 10.0.0.175 to update on 10.0.0.185.. What was my mistake?

In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...

rm001 said:
In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...
Click to expand...
Click to collapse
Yeah... Sad...

rm001 said:
In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...
Click to expand...
Click to collapse
Download: Firmware 10.0.0.186 Android 10 - Huawei P30 Pro - VOG-L29 [Europe] - Carbon Tesla Downloads
Download the full 10.0.0.186 firmware update for Huawei P30 Pro (VOG-L29) devices in Europe via the direct link provided below. This update is based on Android 10 with EMUI 10 on top. Package Details ShareTweetShareShare0 Shares
huaweidl.com
Do you know if I need unlocked bootloader to install this firmware? Thnks

Noexcusses said:
Download: Firmware 10.0.0.186 Android 10 - Huawei P30 Pro - VOG-L29 [Europe] - Carbon Tesla Downloads
Download the full 10.0.0.186 firmware update for Huawei P30 Pro (VOG-L29) devices in Europe via the direct link provided below. This update is based on Android 10 with EMUI 10 on top. Package Details ShareTweetShareShare0 Shares
huaweidl.com
Do you know if I need unlocked bootloader to install this firmware? Thnks
Click to expand...
Click to collapse
you can install it with locked bootloader. But after installation it will cause a hard reset and delete all information even in user part of memory. Backup your files.

rm001 said:
you can install it with locked bootloader. But after installation it will cause a hard reset and delete all information even in user part of memory. Backup your files.
Click to expand...
Click to collapse
I have no prob with reset. Just tell me this. Should roalback to 10.0.0.175 first and then update to 10.0.0.185 or just install 10.0.0.185 on 10.1.0.181?

Noexcusses said:
I have no prob with reset. Just tell me this. Should roalback to 10.0.0.175 first and then update to 10.0.0.185 or just install 10.0.0.185 on 10.1.0.181?
Click to expand...
Click to collapse
You can`t install 10.0.x.x over the 10.1.x.x.
On the first step you have to downgrade to 10.0.0.175 via HiSuite, then you will be able to flash the 10.0.0.185, using this method ("HOW TO flash dload FW: ... UPGRADE USING OTG ADAPTER or OTG CABLE + USB MEMORY STICK")

rm001 said:
You can`t install 10.0.x.x over the 10.1.x.x.
On the first step you have to downgrade to 10.0.0.175 via HiSuite, then you will be able to flash the 10.0.0.185, using this method ("HOW TO flash dload FW: ...")
Click to expand...
Click to collapse
Thnks brother..

I roaled back to 10.0.0.186 The quality at day light fotos is huge.. Now I'm searching to download on
10.0.0.185 and I can't find it anywhere for p30 pro vog l29 c431... Europe isn't available on pc suite too
If anyone can help I will appreciated