My car (a Nissan Leaf) has bluetooth Cell + AD2P. However, the microphone input only works during a Cell call. That means no voice input to apps, Android Assistant, Android Auto, or network oriented phone apps. Somehow "OK GOOGLE" seems to trigger, but nothing after that.
Is there any way to override and at least make the internal microphone live, or some extra mic plugged into the headphone jack?
Related
So, I have a new Toyota Avalon with built-in bluetooth. Was wondering if anyone knew of hacks, tricks, tweaks - software or hardware - to permit a2dp to show up when connected through bluetooth. It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Anyway to do this?
Also, for anyone with a Toyota and bluetooth, is there any way to get Microsoft Voice Command activated from the steering wheel? On all my external car bluetooth speakers, hitting the call button activates Voice Command. Doesn't do it with the built-in Toyota system...unless I am overlooking something.
BUMP....
Is there someone on the forum with a Toyota and bluetooth?
I am bummed about this...the only way I can stream or play audio is use the AUX jack which is fine EXCEPT it means that the phone cannot be used via the built-in blue tooth...the other party can be heard by the car microphones don't pick up my voice (presumably because the AUX connector somehow hijacks it???!!)
Any help would be appreciated.
freddiemac1 said:
It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Click to expand...
Click to collapse
That's what would happen if the car's BT did not support A2DP. My guess would be that your car only supports handsfree.
I'm in the same boat. I have an '07 Sienna and I have been looking for a way to connect AD2P bluetooth. So far, I'm having no luck.
I've thought about mounting my i.tech clip inside the dash to the Aux input. That means I'd have to modify the i.tech to work when power is connected. I would also have figure out a way to use the Aux port directly (with another device) if I wish. It is always something...
The '09 Toyota's support the AD2P.
works for me
so, I am in a '10 toyota. When I get into the car, it will pair up as handsfree, but does not show AD2P initially. For me at least, if I go to the BT tab on the audio screen, and press and hold the play button, it will start playing from the last playlist I was using. The steering wheel seek up seek down work to skip forward and back.
The first time I needed to initiate some music playing on the phone, and then tell the car to connect bluetooth through the BT tab on the audio menu, I think it hides the AD2P unless the phone requests it, and treats it separately from the handsfree connection.
I wish you luck- for short trips, it is great to be able to just sit down in the car, and have the radio play my mp3s without having to muck with my phone or cables.
One of the things that was frustrating on the old X was that driving mode was sort of useless if the device connected to your car Bluetooth. My understanding is that there are two reasons:
1) The primary reason is a2dp. All audio is routing through Bluetooth and unless you car is set to the Bluetooth/aux input, you don't get any of that audio. The phone is sending to the car but the phone doesn't know the car isn't playing it.
2) moto sort of assumed while on Bluetooth in your car, the car is handling everything and you don't need their Assistance.
Thoughts on these? Any way for the features to still work on the new x while on Bluetooth?
Two years later... did you find a solution?
I too am finding it annoying that Moto X won't cut in with an announcement over the car stereo. I've just come from Windows Phone 8.1 and it had no problem doing that. Have you found a solution that works?
I find that it works quite fine. In my phone BT settings, I set my car bluetooth to media only. I set my BT earpiece to calls only. I get all moto drive, Google voice notifications over the car stereo. My phone calls go to the earpiece for privacy. Moto drive still announces calls over the car BT stereo.
Reading the original post, my car stereo is always on BT. I stream music / content through my phone when I'm in the car. I don't use the radio or CD player.
This has frustrated me for years with both Galaxy S5 and Galaxy S8. No matter how I configure things (I've tried every imaginable combination of settings but may have missed something) it refuses to use the bluetooth mic to input navigation commands into Google Maps. It always uses the phone mic even when sending audio to the bluetooth device. This is especially frustrating with motorcycle helmet bluetooth, making voice navigation impossible when riding. Bluetooth mic works fine for phone calls, so the basic functionality is present. Has anyone else experienced this and perhaps found a solution?
I cannot use the mic when Bluetooth is connected in any apps, it just records blank, no voice typing, assistant, nothing. This is when connected to car Bluetooth or Galaxy Watch. doesn't even use said devices mic. When I disconnect the Bluetooth the mic works again instantly. Driving me bananas especially considering i'm connected to watch all day. Is anyone having this problem?
juzzystar said:
I cannot use the mic when Bluetooth is connected in any apps, it just records blank, no voice typing, assistant, nothing. This is when connected to car Bluetooth or Galaxy Watch. doesn't even use said devices mic. When I disconnect the Bluetooth the mic works again instantly. Driving me bananas especially considering i'm connected to watch all day. Is anyone having this problem?
Click to expand...
Click to collapse
I had this issue with the 2XL when connected to my car bluetooth. Would not accept voice input. I just stopped using this feature and just use the phone microphone instead. Looks like they still haven't resolved this issue.
Do some searches and you can find that you aren't the only one.
only thing i noticed with BT is that when Im connected to my jeep.. I dont get SMS notifs (sound).. and I have my typing make sound and that is absent while connected to my jeep BT radio..
This is my setup:
Aftermarket head unit (IDCORE) connected through AUX to car stereo. AA is connected wireless (S10+, stock) with head unit; there is also car BT connected to mobile; when driving TWO active BT connections: 1, phone - car BT for audio and 2, IDCORE for AA).
And this is my problem:
AUX output (head unit -> car stereo) works, but has a quite annoying (static?) noise. Ground loop isolator is set, everything I can do hardware-wise is done -but the quality of AUX sound is MUCH LESS than it is when using BT phone-car connection (makes sense, Meridian built in system, with fiber optic).
Question:
considering above and that there IS an active phone-car BT audio connection during driving (beside the necessary AA-IDCORE connection) is there a way (software, app, switch?) to route AA sound through the phone-car BT audio connection, instead of the (noisy!) AUX wire?
Rooting of the phone is not an attractive option (due to my company account on the phone) - but I would be interested in any solution; as noise on the AUX output is quite disturbing. Thanks in advance
Have you checked the Bluetooth settings and checked music audio for the connection to the head unit?
Just did it. I CAN route music audio (in my case TuneIn) to BT in the settings of the phone (sounds, separate app sounds setting), but 1, this does not work (no sound over car BT from TuneIn, when using it on AA), 2, this setting can only be set for ONE application at the time (and I also use navigation, news service on AA), 3, the Android Auto app (the one I need?) does not show up in the application list of this setting. Still stuck.
My idea was (but I don't know if it is possible) a nifty app, that FORCES all sound (music, nav, news, etc) from the phone to BT (car), even when using AA.
I've got the same problem, using AA over USB and can't get Viper working because it doesn't stream over Bluetooth.
I have the same request. I have an AA unit attached to an original BMW X5 nav system. I can switch between them by long pressing the MENU button. The problem is that the AA unit can output sound only via audio jack and my car's system has fiber optics. The quality is very poor when compared. Is there anyway in which I can force my Android phone to output AA sound through car's BT? The AA unit has an option to do this for phone calls but unfortunatly not for regular sound (Spotify etc).
Anyone heard of anything related to this? I noticed that in the iPhones there is a setting in the accessibility options to route the audio through bluetooth. But there is nothing similar in AA. I can't believe this feature is not requested more.
Has anyone solved it? I'm struggling with the same thing.
I just ended up buying a BT transmitter which connects to my device's jack audio out and in turn it connects to the car's bt. It is stupid that there is no software solution to such a simple problem. Why can it do it for audio calls but not for music!? Why the iPhone can do it but the all configurable God of a mobile OSes simply can't?
Also, another idiotic thing of AA is that it doesn't allow you to switch the call to speaker or another bt device... in fact nothing happens when I get a call on the actual phone when connected to stupid AA. This is sooooo idiotic. Way to go android...
Aawireless also has a fewture that solves this also
Really? Where? What is it's name? Where do I access this?!
Aawireless: that is a piece of hardware again, isn't it (https://www.aawireless.io/)?
I look for an app/ software to solve this issue, if possible..
Aaahh I thought the reference was to Android Auto Wireless not a 3rd party hardware thing.