S6 Active - SM-G890A - Bluetooth Issue - Galaxy S6 Active

About 1 year ago I purchased a stereo for my car that allows me to connect via Bluetooth for music and phone calls. Everything had been working fine until about 2 weeks ago. My phone will connect to the stereo when I first start the car and will work as it should until the phone locks itself. It seems that the phone turns off Bluetooth when it locks. No new/additional apps have been installed in the past month or so. Although, the existing apps have been automatically updated during this time. Not sure if its relevant but the stereo is a Pioneer FH-X731BT; its an inexpensive head unit but I'm not sure that matters since it had worked fine for about a year.
A couple of tests I've tried;
1) Connect my S6 Active to a Bluetooth speaker and then stream from Pandora = seems to work OK, it doesn't stop when the phone locks
2) Connect my old Nexus 5 to my car stereo via Bluetooth and stream Pandora = seems to work OK, it doesn't stop when the phone locks
I don't understand how its possible to connect my S6 Active to a Bluetooth speaker and all is well but, when I connect it to my car stereo it stops playing music when the phone locks! And, I have tried multiple streaming resources as well as music that is stored on the phone with the same negative result.
It doesn't seem to be just a music playing issue; after the phone locks, phone calls are no longer directed through my stereo either.
I have no Task Killer app installed.
Samsung Galaxy S6 Active
SM-G890A
Android 7.0
Please help if you can. Thanks!

SOLVED - Wipe phone and start over.

Related

Bluetooth Connectivity Issues

I got my Nexus 7 last week and have not been able to put it down. Recently I got a bluetooth keyboard to go along with it and it brought some major bluetooth connectivity issues to my attention. Has anyone else had any issues with bluetooth accessories on the Nexus 7?
The problems I have been dealing with:
When connecting to a bluetooth device whatever screen I am on on my tablet refreshes (ie: home screen redrawn, chrome all tabs refresh)
Bluetooth connectivity drops momentarily (tethering or connected to bluetooth keyboard)
I'm trying to figure out if it's the unshielded speakers on my office desk or if it is an actual problem with the bluetooth module on my Nexus 7.
Quick update, I've been able to recreate the issue with the screen refreshing/redrawing when a paired device is connected and disconnected. It seems that anytime you connect or disconnect a bluetooth device it refreshes whatever screen you are on (if it's a browser window where you've filled in a bunch of text on a forum you will lose all of it because the browser tabs refresh as well).
While I have not tested this specific BT setup I can confirm that the BT performance on this device is horrible. Specifically with BT headsets when used with any VoIP app or even Google talk.
I hope it is just a software issue and will be fixed with an update.
Sent from my Nexus 7 using xda premium
Here's a quick video of what's going on with mine. I have another Nexus 7 arriving today so I can test to see if it's just an issue with the one I currently have.
http://www.youtube.com/watch?v=T4vLOxr-qxE
I have been unable to play an .avi movie with a bluetooth headset, it freezes after a few seconds. It plays no problem without it. I have also had issues with the tablet becoming very slow when tethering to bluetooth, at least for number of seconds (> 30), presumably when it got internet and started syncing...but no slowdown on the wifi, so it wasn't the syncing with the issue, but the bluetooth part of the communication, I believe. Anyone else been able to play movies with a bluetooth headset or speakers?
I have had no trouble at all with Bluetooth. My Samsung Hs3000 works great with music,movies and any internet or sys sounds. It Also has a very good range of at least 75ft or more in the open and covers my downstairs when inside.
I have been able to pair 2 headsets. 1st had no function at all, ext. mic did not work and no sound- using groove ip or playing music. 2nd was a stereo bluetooth set with ext. mic. No transmission with groove ip. However, with this one I was able to listen to music.
Also paired with 2 phones. One with JB-( Gnex )and one (Note)with ICS. No data transmission to tablet with either one over bluetooth.
same issue - getting sound on voice
I've bluetooth paired with phone and media audio connected.
I get the sound but not mic.
This is with nexus 7 4.1.1 using novero rockaway headset...it works fine with the ipad.
any ideas? I'm stuck.

[Q] Issues with Moto X and two Bluetooth devices

I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
fury683 said:
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
Click to expand...
Click to collapse
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Thanks. I wasn't able to test it on 4.2.2 (it took right away OTA out of the box) with my Moto X, but it was working fine on my Droid Razr Maxx on 4.1.2 Jelly Bean before I got the Moto X.
I will have to try and see how it works with just the A2DP device without the handsfree. I rarely ever talk on the phone, and with the Touchless Controls I could call people and just pick up the phone. Or turn the phone portion back on for the A2DP device so the sound would come through my speakers but I'd still have to use the mic on my phone...
Still annoying. Thanks again for the reply.
gtg465x said:
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
Click to expand...
Click to collapse
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
I have a Dension BT gateway for my car that provides BT audio and hands free. My phone connects automatically as long is bluetooth is turned on. I also connect to a BT OBD2 adapter sometimes, and I tried it today, and I kept playing Pandora via BT and also connected to the OBD2 adapter and had data going from both of them.
fury683 said:
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
Click to expand...
Click to collapse
Yeah, but they aren't a separate connection I don't think. Pretty sure the one connection handles both.
Seems to be an issue with the A2DP device specifically. I unpaired my car and the dmzmusic device and repaired them both, same result. I added just the dmzmusic, and got the same thing.
I changed my Tasker profile to just flash a toast message to show it connecting and disconnecting instead of firing Pandora to see if that mattered and it didn't. I did not try disabling the Tasker actions entirely to see if that worked.
I have a pair of Bluetooth headphones at home that I may try as well to see if it will connect to those. They fire the same task as the dmzmusic does to launch Pandora when they connect, and kill it when they disconnect.
Hoping this gets fixed, because it's VERY annoying.
Is it possible to submit this to Google/Moto as a bug if it is a larger problem with all A2DP devices?
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
gtg465x said:
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
Click to expand...
Click to collapse
Thanks. I will try it with the Philips bluetooth headphones as well. The device in my car is pretty cheap. I don't know what version of Bluetooth it has, but it was only about $5. Anyone know of a similar device that can receive a Bluetooth audio signal and convert it to 3.5mm, and is powered by USB?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Well I sort of solved this. There's an app in the Play Store called Bluetooth Auto Connect. This can connect to bluetooth devices with a set of conditions and states, and works as a plug-in to Tasker. I told it to connect to dmzmusic upon connection to any other bluetooth device (in this case, my General Motors hands free). Worked perfectly. Thought you'd like to try it out for your dual device setup.
However, I also have a new issue. It seems the reason my phone call wasn't on bluetooth at first was due to some sort of connection issue with the General Motors unit. While driving home tonight, every few minutes my car radio said Connected. And every time I turned the car screen on to thumb up a song on Pandora, it flashed Connected to a trusted device. Which implied to me that it was disconnecting periodically. No idea why it would do this. Didn't see any setting for it in bluetooth, and battery saver isn't on.
Anyone seen something like this? Will try tomorrow without the trusted device settings to see if that matters....
I noticed a similar auto-connect issue with mine, when I was attempting to troubleshoot the stuttering A2DP issues I'm having. If I have the HFP and A2DP profiles both enabled, they both connect right up when the ignition is on. If I have the HFP profile disabled, and only A2DP enabled, it doesn't connect right away and I usually have to manually force it. Very strange. This whole BT situation on this phone has been a pretty big disappointment for me, since I had everything working great with my GNex (running 4.3) and now it's like I've lost the heart of my car audio system.
I bought the Kinovo BT dongle for my wife for Christmas, so it will be interesting to see how that works with her Moto X. I'm pretty excited about trying out the AptX encoding for lossless audio, but I doubt she will even notice the difference.
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
totempole said:
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Did you look at the auto connect app? It worked fine for me. My Bluetooth stopped working for a day or two because I froze a process without realizing what it was so BT wouldn't turn on at all. I think I have to remove and repair both of my devices to get the same setup I had on my Razr Maxx on 4.1.2,
The connecting/disconnection and/or 1-2 minute lag from my General Motors hands-free connection was annoying too. Have to see if that persists. I tried making the A2DP device the trusted one to see if that changes anything.
Really hoping this is something that Moto can/does fix, especially through a Play Store push like they've done with Active Display and the camera app.
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
640k said:
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
Click to expand...
Click to collapse
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
fury683 said:
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
Click to expand...
Click to collapse
not rooted/haven't wiped.
640k said:
not rooted/haven't wiped.
Click to expand...
Click to collapse
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
fury683 said:
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
Click to expand...
Click to collapse
could be completely device specific too. if your vehicle is BT v2.x or whatever. my tunelink specifically has problems with data/audio stream with the X that my X doesn't have problems with on other devices. could be software/hardware incompatibility issues.
FWIW, my vtech BT phone @ home would NEVER pair with other devices. i would always have to manually pair.
I just emailed Moto about this, because I'm having bugs too. I think that you're on to something, 640k. My Pioneer headunit (FH-P800BT) has BT 2.0, and while HSP connects fine, A2DP only works on the first pair, and after disconnecting once and reconnecting, it won't ever connect A2DP. I have to completely unpair the phone and re-pair it to get both A2DP and HSP working. My phone also gets stuck on "Connecting..." under BT whenever it's having issues connecting with A2DP. Here's the email I sent off to Moto"
I've noticed an issue with my new Moto X that I never had with my Samsung Galaxy Nexus. The phone itself performs way better than my older phone, but I've had a specific bluetooth problem. I have a Pioneer headunit that supports A2DP as well as HSP (music playback and headset functionality) and with my Galaxy Nexus, it worked great, I paired my phone up with the headunit, and both A2DP and HSP would pair at the same time, and work perfectly. With my Moto X, when I first pair the phone to the headunit, it pairs both profiles, but after I've disconnected (turned car off or turned bluetooth off) and come back, it only pairs HSP, and when I try to pair A2DP, my phone gets stuck on "Connecting..." under bluetooth to the headunit, and never will connect to A2DP unless I unpair and re-pair the entire phone. I've tried resetting my headunit and phone and still the same problem exists. Looks like other people are having issues with bluetooth too, as per this article on a popular Android forum > http://forum.xda-developers.com/showthread.php?t=2562186 < I'd like you all to check this out. Seems it's just on 4.4, and wasn't present on 4.2.2 (I never checked myself on 4.2.2, as I immediately upgraded to 4.4 when I got my phone. This doesn't seem to be a hardware problem, but more of a software problem. Please check into this, and don't just read this and act like it's only a problem a handful of people are having. I'd like to have this fixed, and while it's not a deal-breaker for me to use the phone, it does make me a bit frustrated. Thanks in advance!
Click to expand...
Click to collapse

Love the phone, hate the bluetooth

Anyone else haing issues here with bluetooth? I can connect to everything bluetooth, wireless speakers, car, headsets, watch etc. The only thing I can get to work reliably is the headset, everything else randomly cuts out or has issues. For example both cars have bluetooth for phone calls, one has bluetooth for media, I can get both to work for a short time but it either 1. Cuts out and reverts back to phone, freezes the system in the one car, or jumps back and forth between the 2. Similar results when connected to bluetooth speakers, can get it to work for about 10-15 minutes then nothing, phone shows it still connected and playing music but no sounds from speakers. LG G Watch R also randomly looses connection. I'm beginning to regret my switch from the S5.
Anyone having similar problems or a fix?? I really want to keep the phone but not sure I can deal with this flaw...........
I have no such issues with the bluetooth. I can tell you that I had bluetooth issues with one of my other android phones. I had to get it warranty replaced. My suggestion is that you get the phone replaced since its brand new.
Mine has been fine so far. I just wish that android was more like apple, as much as I hate to say that. Both my S6 and M7 will play phone audio fine when in a call, but to use maps I have to turn the radio to Bluetooth mode. Makes it kinda boring to ride with no radio just to get turn by turn nav.
Sent from my SM-G925V using XDA Free mobile app
I haven't had any issues with my smart watch (moto 360) but I have had some weird issues with my car's Kenwood media deck. The phone will connect to the unit, but 75% of the time no sound will come from the speakers on the first try. Sometimes just waiting about a minute does the trick, other times I turn BT off/on and it'll work fine the 2nd time. However because I haven't had any issues connecting with my watch, ear piece, or laptop I am willing to bet it's it an issue with the Kenwood and not the phone.
Thanks guys. Don't want to have to warranty swap it but looks like that's going to be my first step.

Bluetooth Streaming to Car Stereo Question

I recently purchased the Pioneer DEH-4800BT head unit so that I could leverage the Bluetooth capabilities. Everything works great, with the exception of the unit reading my music library via Bluetooth. If I restart my Note 4 and then connect it via Bluetooth to the Pioneer head unit, it reads the library and allows me to browse my music as it should. However, if I turn off my vehicle thus disconnecting the Bluetooth connection, the unit will not read my library without me having to restart my Note 4. Has anyone ever encountered this? I have a feeling there is something on my Note 4 preventing the unit from reading the library a second time without restarting. Unfortunately hours of Google searches on this subject have left me with no solutions. What can I do to fix this? Thanks in advance!
Don't have a solution for you but I have experienced a similar issue with my Kenwood DDX719 that I have owned for 4yrs now.
My work a round is to enable BT on phone after my Kenwood has booted up.
This way it reads all the time , if I stop/turn off the car I'll turn off BT and next time I started up again I re-turn phone's BT back on.
My boot up is the time it takes me to buckle my seat belt, next step is to turn on BT on my phone.
My old S4 would work all the time even if BT was already on before Kenwood boot up.
I searched a while back when we upgraded phones (8 months ago) but could not find a solution.
Sometimes when i'm running around making several stops I'll leave phone in car with BT on and after starting up car Kenwood will display all info no problem but like I said "somtimes" not always.
The only thing affected is my music library, contacts always show up even if music library is missing.
Pp.

Bluetooth issue

Anyone else have an issue with Bluetooth audio cutting out every few minutes then works fine again for a few?
Yes!
jellyhead said:
Anyone else have an issue with Bluetooth audio cutting out every few minutes then works fine again for a few?
Click to expand...
Click to collapse
Took forever to get it to pair with my Onkyo Receiver, then dropped the connection twice??
Just got my device yesterday, and I'm having issues as well. My Gear S3 keeps saying it's disconnected and will reconnect in a bit. Pretty annoying.
Moostafa29 said:
Just got my device yesterday, and I'm having issues as well. My Gear S3 keeps saying it's disconnected and will reconnect in a bit. Pretty annoying.
Click to expand...
Click to collapse
Annoying is putting it lightly, It seemed that my Gear S3 and the Onkyo Receiver are fighting for the BT connection??
For some reason this phone doesn't connect well with other Bluetooth devices nearby. I turned off 2 other Bluetooth devices inside the house and now the connection is good with my patio speaker.
No problems here. I always have my Gear S3 connected to the phone by BT, and often have a BT headset connected to the phone too.
I paired both my bt speakers yesterday and ran the dual audio from the phone for hours without issue.
Maybe the problem is device specific. I remember having the same issue with my note 7 and this BT adapter for my Onkyo receiver.
The only time my Gear S3 Frontier complains about being disconnected is when I'm out of range of the Note. The Note connects fine to my car ('14 BMW 535ix) and radar detector (can't have a BMW without one! :laugh, while remaining connected to my watch.
Yes, here also issues with connecting audio to car kit. Funny that I only noticed this after the first samsung oficial update.
It connects to the hands free phone, bit not to audio. Cleared Bluetooth system apps memory and cache and 8t worked again. Short time though. Problem is back again...
Now putting my hope on Samsung update.
Oh my gosh it's driving me crazy! One time BT stayed on 28 minutes. Usually it cuts off the call in 2-3 minutes!
Not sure what Note 8 types have BT issues, my N950U1 (SD), never has an issue. Maintains connection with Gear S2, always connects to car (audio and phone, Volvo XC60) and streams music and facilitates calls to wireless head buts/headphones. No hickups or disconnects whatsoever. Compared to Note 5 a huge improvement.

Categories

Resources